GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE...
Transcript of GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE...
![Page 1: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/1.jpg)
Ph No: 0471-2567726/813/317/319GOVERNMENT OF INDIA Fax +091-0472-2800712,0471-2567305DEPARTMENT OF SPACE
Ll QUID PROPULSION SYSTEMS CENTRE VAIIAMALA, TRIVANDRUM 695547, KERALA
PURCHASE & STORES Date: 17/10/2017
INVITATION TO TENDER
Our Ref No : TC21 2017-030241-01 000000Mis Tender Due: 16:00 Hrs ISTon 02/ll/2017
Opening: 10:30 Hrs ISTon 03/ll/20 17
Dear Sirs,
Please submit your sealed quotation, in the Tender Form enclosed here along with the descriptive catalogues I
pamphlets lliterature ,superscribed with Our Ref.No. and Due Date for the supply of the following items as per
the terms & conditions mentioned in Annexure( Form No: DOS:PM:20
S.No. Description of Items with Specifications
OUTSOURCING FOR ASSISTING IN CRYO ENGINE & STAGE REALISATION ACTIVITIES OF LPSC BY SERVICE PROVIDER FOR TWO YEARS AS PER RFP DOC No.LPSC/CPES/OUTSOURCI ~IG/RFP/01/2017
Unit
LOT
Quantity
DELIVERY AT: VALII\MALA
MODE OF DESPATCH ONSTE
DUTY EXEMPTIONS EXE:tIfPTED
SPECIAL INSTRUCTIONS NIL
SPECIFIC TERMS DOS:JM:20
INSTRUCTIONS TO TENDEREH.S: 1. Request For Proposal (RFP) as per Annexure - I. 2. General terms and conditions as per Annexure - II. 3. Instructions for Two Part tender as per Annexure - III. 4. Fax/email offers will not be accepted.
For and on behalf of the President of India The Purchaser
![Page 2: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/2.jpg)
-----------
Control Status UncontrolledDocument No LPSC/CPES/OUTSOURCING/RFP/Ol/2017
Rev No. 00 ~e August 2017
RE(~UEST FOR PROPOSAL
OUTSOURCING FOR ASSISTING IN CRYO ENGINE & STAGE REALISATION ACTIVITIES
OF :LPSC BY SERVICE PROVIDER
CRYO PROPULSION ENGINES AND STAGES ENTITY
LIQUID PROPULSION SYSTEMS CENTRE, VALIAMALA
THIRUVANANTHAPURAM - 695547
Liquid Propulsion Systems Centre Page 1 of 14
![Page 3: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/3.jpg)
I
00 DateI ~ I Rev No.
TABLE OF CONTENTS
SI. No. Description Page No.
1. Introduction 3
2. Scope of work 3
3. Nature of Work 3-4
4. Service Provider Responsibilities 4
5. LPSC Responsibilities 5
6. Personnel 5
7. Personnel Attrition and Re-qualification 5
8. Work details 6-10
9. Verification by LPSC 10 ~
10. Schedule 10
11. Documentation 10
12. Records 10
13. Contract type and prices 10
14. Comparison of offers 11
15. Payment 11
16. Security 11
17. Official Secrecy 11
18. I Grievance redressal and arbitration 12
19. Ownership
I
12
•
20. Short Closing/Termination of Contract 12
21. General Terms and Conditions 13 I
22. Submission of bids 14
23. Price bid format 14
-~/
Liquid Propulsion Systems Centre Page 20f14~
![Page 4: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/4.jpg)
Document No LFSC/CPES/OUTSOURCING/RFP/Ol/2017 Control Status Uncontrolled
Rev No. August 201700 DateI
'---------==----'--------------'----------------
1 INTRODUCTION
1.1 LPSC, ISRO is loo.dng for organizations having competent and diligent personnel to assist the departrrental staff to carry out activities related to realisation and supply of Cryogenic Engines and stages (CUS, C25 & Semicryo) at LPSC, Valiamala, Thiruvananthapur am.
1.2 LPSC proposes to avail the services for realisation & delivery of Cryogenic Engines and stages (CUS, C25 8: Semicryo) from a reputed third party agency.
1.3 The proposal shal include full details of the company, financial status, past experience, major tasks undertaken in similar areas, technical manpower available with their competence etc. It is requested to provide all relevant details for our consideration.
2 SCOPE OF WORK
2.1 Service provider is required to deploy competent manpower in required numbers to support Departmen: personnel in carrying out tasks related to Cryogenic Engine and stage (CUS, C25 & Semicryo] realisation for a period of 2 years from the date of contract.
3 NATURE OF WORK The broad nature ofactivities to be carried out by the personnel deployed by the service provider is given below 3.1 3D modeling of parts and sub-assemblies
- e.G, MI & Mass es .imation - Preparing Integration sequence. - Preparation ofmcdel Views/drawings and slides for presenting to review meetings.
3.2 Assistance in cold flow test and hot test - Assisting in conducting cold flow test of various assemblies and calibration of flow
control componerts like orifices and cavitating venturies at IPRe. - Assisting in carrying out hot test of engines at IPRe.
3.3 Activities related to Fabrication & Raw material clearance - Preparation of Fabrication request, Supply of drawings, Identification of materials for
fabrication from stock, verification of test certificates& drawings. - Issue of Raw material, Preparation & submission of request with relevant details for Raw
Material Clearance Certificate (RMCC) and coordination with QA/QC agencies for obtaining clearan :e.
- Maintain logbook with details of free issue Material (FIM), RMCC application and issue details ofFIM to t ie work Centre.
3.4 Obtaining QC/QA clearance of fabricated parts: - Visual inspection of fabricated parts, verification of inspection reports and assessment
of the non conformances for discussion in Review forums. - Completion of LSC/NCRB actions and prepare request for Hardware clearance. - Stock the hardware with clearance in bonded stores for integration
Liquid Propulsion Systems Centre Page 3 of 14
![Page 5: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/5.jpg)
~ I Rev No. 00 ~)ate I August 2017
3.5 Preparation of requests for special processes(Heat treatment & Mechanical Testing, XRF, UT, DP, X-Ray, Pickling & Passivation, Anodisation, riveting, Sub assembly level welding etc) - Verification of readiness of the hardware for the above mentioned operations and study
the reports after works are completed and obtain QA Clearance.
3.6 Obtaining Lot clearance for Bought out items & maintenance of issue register (Rods, Sheets, Tubes, Fasteners, Rivets, Flexible hoses, filters, etc.) - Verification of test certificates/Inspection reports w.r.t. Purchase order, Checking
conformance to Quality clauses/Specifications, Raising NC reports, if required and preparation of pre-delivery clearance papers to obtain QAR
- Maintenance of stock detail and issue of items with clearance tag as per request. - Preparation of requirements for future procurement, based 01 consumption and submit
periodic reports on the stock position.
3.7 Generation/updating of Bill Of Materials (BOM) for Engine & stage systems, prepare raw material requirements (part wise & material wise) for procure ment
3.8 Assist in preparation of design documents, design calculations, test data compilation, performance analysis and presentation materials.
3.9 Preparation of integration documents/Check list verification Listing of applicable drawings as per latest Configuration Control (CC) drawings. Prepare the list of parts and subassem blies required for systern integration. Compilation of hardware clearance details Listing of checks to be carried out before/during assembly and permissible deviations Work out cleanliness requirements, insulation and special inspections to be carried out etc.
3.10 Providing inputs/support for preparation of PPT presentations for various review meetings (SRC-Cryo, SRC-Str, CCB, LSC, NCRB, DTR, DRTetc).
3.11 Participation/ coordination in the activities at work centres(LPSC/HAL Banglore), iPRC- Mahenrlragiri, SDSC- SHAR.
3.12 Service provider's personnel may also be deputed to other ISRJ centres/Work centres in and around Thiruvananthapuram, if found necessary, for execution of the tasks assigned. I
J
3.13 Any other activity that may be called for, from time to time, a s may be felt necessary by LPSC.
4 SERVICE PROVIDER RESPONSIBILITIES
4.1 Service provider is required to depute the required personne I in uninterrupted way for carrying out the activities in a time bound manner.
4.2 Service provider is required to provide replacement manpowe:: on real-time basis, in case ofleave, absenteeism or attrition of existing manpower.
4.3 Service provider shall identify a suitable focal point for ensuring satisfactory execution of the activities under this contract.
Liquid Propulsion Systems Centre Page 4 of 144
![Page 6: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/6.jpg)
Control Status UncontrolledDocument No LFSC/CPES/OUTSOURCING/RFP/01/2017
Rev No. 00 Date August 2017
4.4 Personnel deputed shall have good oral and written communication skills in English.
4.5 Service provider shall ensure that, the personnel deployed by him, completes each of the
activities related to a particular hardware with summary/draft report in stipulated time
period.
4.6 No Sub-contracting ofwork in any form, either part or full is permitted.
4.7 Service provider shall provide required experienced hands in areas where experience is
indicated as pre-requisite.
4.8 The activities envisaged under this contract are of sensitive nature and covered by rules
and regulation of th-e Department of space. No information shall be taken out of the office
or disclosed to anyone outside the office.
5 LPSC RESPONSIBILITIES 5.1 LPSCshall associate with service provider to co-ordinate the activities listed under nature
of work.
5.2 LPSC shall have the right to monitor the performance of the service provider's personnel
during execution of the activities and improvements, if any required, shall be brought to
the attention of the service provider's focal point.
5.3 LPSC, through thei ~ authorised personnel, shall provide the details for carrying out
activities.
5.4 LPSC shall be responsible for clarifying any queries raised by the service provider.
5.5 LPSC shall provide adequate PC's, printers & associated consumables for executing the
job.
5.6 Consumables and o:her utilities required for carrying out the work shall be provided by
LPSC
6 PERSONNEL
6.1 The personnel deputed shall have minimum qualification of Degree/Diploma in Mechanical Engineering with 2 years' experience in relevant area.
6.2 Service provider sh all submit the details regarding qualification and experience of the '~Tnrlr fnrro ho,nlT ~on]nuo~ ",c ",n~ HThon norcnnno] ",ro nnc,Hnnorllrh",nlTorl fnr ...... _ _ - _ 0 t-" -J , ..., .t' ...,_ -. .t'- _ -., b -.' _ ...
verification by LPSl:. Personnel meeting the aforesaid pre-requisites should be able to demonstrate their skills in the presence of department's representative. Persons approved by LPSC only are to be deployed under the contract. In case of any attrition inI Ithe skilled personnel, LPSC may request for fresh skill demonstration of personnel.
7 PERSONNEL ATTRITION AND RE-QUALIFICATION
7.1 Duringthe period o:'contract, in case ofany attrition in deployed personnel, the contractor shall take appropriate actions to make available suitable experienced personnel as replacement, with concurrence from LPSC.
7.2 Contractor has to ensure uninterrupted services. i.e, in case of any absenteeism, the requisite number cf personnel shall be positioned at LPSC. To ensure this, the service provider shall have experienced manpower in his roll to provide replacement.
Liquid Propulsion Systems Centre Page5 of 14
![Page 7: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/7.jpg)
I ,.., I Rev No. 00 _____------'-- l August 2017
8 WORK DETAILS
Following is the work description, annual deliverables and ar nual man-month estimate for the personnel to be positioned by the SERVICE PROVIDER at LPSC, Valiamala for the activities envisaged under the contract. This work and annua deliverables will be more or less uniformly spread over the whole year. Variations, if any, shall not exceed ± 10% of the average requirement.
Annual Average Man
SI deliverab houri Total Man
No. Work description les (nos) deliverables hours (hrs)
Approx. (hrs) Approx.
Approx,
Graduate Engineer Assisting in the following activities related to Engine & staae realisation
Support in preparation of documents related to stage
1. LOG book, integration input documents, check list 35 40 1400documents, measurement plan documents and technical reports related to CUSj C25 Engine &stage. Extraction of flight data using software and generation
2. of plots for Prediction document and Post Flight Analysis 3 60 180 (CUS & C25 -PFA) document
3. Preparation of Drawings, AMS, Change proposal, Input 80') 2 1600and execution of reports Assistance in generation of part level & assembly level
4. drawings for flight hardware's, integration drawings for 20 ) 2 400various systems and insulation drawings for tanks and structures. Consolidating the requirement of Composite items.
5. Coordination with CMSE for collection of items and 20) 0.5 100 clearance of Non conformance Preparation of request for supply of non-metallic material (Foam, Foam pads). Interaction with VSSC for
6. obtaining clearance, Providing Request for testing of 2(! 5 100 I
specimen, collection & transportation of items from
10(~ 803 I 0.2 I
500 I VSSCtoIPRC
7. Stocking of cleared hardware in Bonded stores. 0.5 Support for preparation of.technical.presentation to
I 8. CCBjNCRBjSRC/LVDRT etc.
160 1
Providing inputs/support for preparation of PPT 9. presentations for various review meetings - SRC-Cryo, 500 0.5 250
SRC-Str, CCB, LSC, NCRB, DTR, DRT, etc. Compilation of action points from various review forums
10. and assisting in identification & preparation of closure 300 1.5 450 notes for pending actions Auditing of inspection reports and non-conformances related to fabricated parts and preparing request for QA
11. clearances. Compilation of snag details for presentation 700 1 700 to Local salvage committee (LSC) & Non conformance review boards (NCRB). ~
1I
Liquid Propulsion Systems Centre
4- Page 6 of 14
![Page 8: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/8.jpg)
Document No LPSC/CPES/OUTSOURCING/RFP/01/2017
Rev No. 00
Compilation of RMCC reports, inspection reports, NC,LSC•12. clearances and preparation of hardware clearance
request Physical verification of fabricated items and co
13. ordination for QA cles.rance and archiving of soft/hard copy of clearances Identification of raw material, QC verification,
14. positioning for fabrication and preparation of RMCC request Storage of QA cleared hardware and compilation of QA
15. clearance reports Preparation of reques t for special processes like heat treatment/anodisatiori/ passivation etc and positioning
16. the hardware at respective work centres, collection of hardware, verification a f ID number and compilation of report.( batch) Verification, Packing of hardware and delivery to IPRC
17. with clearance report Verification, Packing of hardware and delivery to LHWC
18. with clearance report Verification of bracket layout at LHWC based on
19. template as well as assembly drawing and support for preparation of verific rtlon report. Collection of inspection report, co-ordination for
20. machining of valve be dy, transporting the item to LHWC and trial suiting (per tank) Test specimen prepat ation and co ordination for
21. mechanical propertyevaluation at LPSC and compilation of report (per batch) Test specimen preparation and co ordination for
22. mechanical property evaluation at 77K/RT at IPRC (per batch) Test specimen preparation and co ordination for
23. mechanical property evaluation at VSSC and 10 5 50 I
compilation of report (per batch) , Co ordinationfor cutt ing of stainless steel reds for heat I I
24 1 treatment, ID number transfer, preparation of request I I200 0.75 150 . with QA certification and positioning at work centre (per
piece)I
Preparation of fastener request, collection of items from 2 80
sub assembly) Physical verification of AA2219 forgings on receipt.
bonded store and packing with identification tag (per 4025.
2 400 (per piece). Preparation for storage Collection BMA from VSSC, verification of ID details &
20026. Collection of test certificate, verification of ID details
2 24027. 120packing with oil paper for storage (per piece) Preparation of report s, packing of BMAand positioning
3 24 7228. at LHWC (batch)
Control Status Uncontrolled
Date August 2017
200 2 400
50 2 100
50 751.5
100 1 100
24 2.5 60
375 2 750
24 1205
3 24 72
24 723
10 3 30
8 12015
Liquid Propulsion Systems Ce-ntre Page 7 of 14
![Page 9: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/9.jpg)
I ~ [RevNo. 00 ~)ate I August 2017 I , . I
29. Preparation of layout scheme for cutting of BMA and 12 2.5 30preparation of drawing [per plate)
30. Preparation oflayout scheme for cutting of BMA and
6 2 12gaskets rper plate)
31. Shock proof packing of items to be transported to
10 2 20LHWC/IPRC (per pack)
32. Preparation of drawing, realisation & assembly of test
15 2 30fixture, closures, templates (non flight hardware) etc.
33. Updating the records of raw material, hardware mass
8 2.5 20input and report generation [per report) Support in preparation of test request, hardware
34. movement and inspection for the CUS steering engine & 15 12 180 gas generator (GG) hardware Support in data extraction, analysis of the cold flow test
35. results and hardware clearance for CUS steering engine 15 8 120 and GG Support in preparation of test request, hardware
36. movement and inspection support, data extraction,
200 2 400analysis of cold flow test results for the semi cryo preburner and thrust chamber injector elements.
37. 3D modelling support for the semi cryo PHTA and AR5
6 50 300test setups. .
38. Coordination of integration activities of PHTA (2 nos.)
300 2 600and AR-5 engine (2 nos.) Grand Total, Manhour/Year 10443
Diploma in Mechanical engineering Assisting in the followina activities related to Engine & stage realisation
Preparation of Fabrication request, supply of drawings, 150~1. identification of materials for Fabrication from stock, 4 6000
verification of test certificates & drawings for suitability FIM Preparation, Issue to MME for fabrication,
I
r:oornin::ltion with MMF . Oht::lininp R::Iw M::Itpri::ll
I
- - -~ ------------- --- ----- - -~ --, --' --' -----~---C> ---- -- - ----------
150j2. Clearance Certificate (RMCC), coordination with QA/QC 2 3000 to provide test certificates, inspection reports and supplementary details Matrrtarnlogbookwlth derattsotclearanccs obtained, ..... -----
I3. work centre details, application etc. Issue of the reports 15CO 0.2 300 along with free issue materials to work centre Visual inspection of fabricated parts, verification of
4. inspection reports and compilation for LSC/NCRB 15(0 0.2 300 reviews Preparation of requests for special processes (Heat
5. treatment/ Mechanical Testing/ XRF/ UT/ DP/ X-Ray/ lOCO 0.2 200 Pickling /Passivation/ Anodisation/ welding etc)
6. Completion of LSC/NCRB actions and preparation of
lOCO 0.2 200 request for Hardware clearance
7. Stocking of Cleared hardware in Bonded stores. 20C 0 0.1 200 8. Positioning the hardware with clearance for integration 15CO 0.2 300
Liquid Propulsion Systems Centre
l
Page 8 of 14~
![Page 10: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/10.jpg)
• Document No LPSC/CPES/OUTSOURCING/RFP/01/2017 Control Status Uncontrolled
Rev No. 00 Date August 2017
'l Verification of test certificates/Inspection reports W.r.t. Purchase order for Fasteners, rivets etc., verification of conformance with respect to Quality 9. 400 0.5 200clauses/Specifications, Raising NC reports, if required., Preparation of pre-delivery clearance papers to obtain QAR and stocking of i:ems in bonded store Maintenance of stock details, Issue of items with
10. clearance (Fasteners, Rivets, Standard Parts etc. with 1500 0.2 300 tag, as per request Preparation of requirements for future procurement
11. 30 2 60based on stock position Obtaining lot clearance for bought out items and ::12. maintenance of issue register (Rods, Sheets, Plates & 50 2 Tubes.l
13. Coordination for realisation & acceptance testing of thermal Screen, delivery to IPRC and coordination for 3 20 60 inflation test
14. Collection and delivery of items from VSSC to IPRC 1000 2 2000 Coordination with V~:SC for surface coating on thermal
15. 2500 0.1 250isolators /brackets Coordination and testing of BMA's & Gas bottles at M/s16. 10 15 150BATL, Trivandrum Supply of hardware with clearance reports to IPRC for realization of Engine and Stage. Generation of requests17 1500 0.2 300for hardware issue from bonded stores and verification of issued hardware with bill of material. Modelling of subsyste-ms for the deviations occurring
1 .
18. 50 4 200during fabrication for thermal and flow analysis. Estimation of CG, MI ,~ Mass of engine systems,19. 300 24008Preparation of integr ation sequence Provide the sketches for the preparation of Drawings of
4different engine systems , Change proposals & QA 400 1600 clearance follow up activities Generation of the engine configuration and fluid circuit
20.
40 20021. 5drawings. Verification of theupdated drawings with previous
I
I·120022 300 4
1 . drawings and Preparation amendment details I Assistance for conducting cold flow test and hot test at 30 16 48023. IPRC, Mahendragiri. Assistance in test SpE cimen preparation and conducting 12024. 15 8 test at high temperature at VSSC Coordination with V~ SC for the surface coating and heat
25 2 5025. treatment. Support in test specimen preparation and conducting 20 3 6026. test at RT at LPSC and Compilation oftest report
10 15 15027. Coordination for testing of Gas bottles at IPRC & CMSE 20Coordination for realisation of gimbal mount assembly. 5 10028.
Grand Total, Man hour/Year 20480
Page 90f14 Liquid Propulsion SystemsCentre
if
![Page 11: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/11.jpg)
9
I".., IRev No. I 00 ~Iate I August 2017
It is envisaged that a work-force of 12 personnel comprising of 4 graduate engineers, and 8 diploma holders need to be deployed on regular basis by the service provider for
carrying out the above activities.
VERIFICATION BYLPSC
9.1 LPSC has the right to supervise & verify the activities carried ou. by the service provider's personnel at any time
10 SCHEDULE
10.1 The personnel deployed by the Service provider have to perform the activities on realtime basis on receipt of work instructions from LPSC.
10.2 Preparation and submission of completion status shall be done within the stipulated time.
10.3 Work shall be completed as per the priority order assigned by LPSC.
11 DOCUMENTATION
11.1 The personnel deployed by the Service provider shall maintain proper records for all the
assigned activities. 11.2 Service provider's focal point shall ensure maintenance oflog t ooks wherever required.
12 RECORDS
12.1 Records generated shallbe submitted to LPSC, on real-time basis,
13 CONTRACT TYPE AND PRICES
13.1 Contract Type
The tenure ofthe Contract shall be Two years. Hence the price quoted shall be valid for ? l1oe>rc Tn re>co nf e>nl1 oV;lTonr;ocrlone>rtrrlont re>n nnt fnr ovronc;nn of tho rontro:>rt fnr- J-_ ...,• ...... ... -"""''-'- ...., ... _ ......J _I:O' ... O- ...... _ --t"-...............-- ......... ............. -r ............... _ ... -,. ...._ ...... ~ ... _ ...... _ ........... - -_... ..._OUOI _ ..................... _ ....... _ ...
I further period of 1-3 years on mutually agreed terms i.e. based on the performance & , 3rd review at the end of 2nd and 4th year.
13.2 Prices "The price shall be quoted as per the following guidelines:
13.2.1 Amortised Man day rate - For performing activities as pel' the guidelines and work content indicated in section 2.0, 3.0 & 8.0
13.2.2 In case the service provider's personnel are to be deployed to other ISRO Centres/work centres as mentioned in para 3.12, the cost related to that, including travel expenses, shall be quoted separately and clearly.
13.2.3 Note: The amortised man day rate and rates for outstation works quoted (as per 13.2.1 & 13.2.2) shall be firm and fixed for a period of 2 years and shall include all aspects like
Liquid Propulsion Systems Centre Page 10 of 14/4~
![Page 12: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/12.jpg)
Document No LPSC/CPES/OUTSOURCING/RFP/01/2017 Control Status Uncontrolled
Rev No. 00 Date August 2017
salary, logistics I ke daily travelling expenses, accommodation (if any), mandatory payments as per social security & other statutory requirements. No other charges shall be payable by LPSC.
14 COMPARISON OF OFFERS
14.1 The offers received will be compared for both technical conformance and the best price.
\.14.2 PSC reserves the right to split and award the order to two or more parties based on quoted
A.
rates.
15 PAYMENT
15.1 Payment would be made every month oncertification of the completed work by the LPSC Contract manager.
16 SECURITY
16.1 The SERVICE PROV] DER has to follow the LPSC security instructions applicable for people & processes prevailing at present and those issued from time to time
16.2 The SERVICE PROVIDER shall ensure that the personnel deployed are all only Indian citizens, character ~~ antecedents of whom are duly verified by the Police. A compliance certificate to this effect shall be provided to LPSC by the service provider.
16.3 The SERVICE PROVIDER shall ensure provisions of social security measures and other mandatory paymen ts as per provisions of prevailing law, including applicable labour laws, for the personnel employed by them.
16.4 The SERVICE PROVDER shall also verify/certify the conduct of the work force at regular intervals. If any of the persons deployed misbehaves or commits any offensive acts, LPSC reserves the right :0 refuse permission to such persons to enter LPSC premises. Any 'tTinl-::lt-inn in t'hic roo:lrrl 'tATill rDC"111t- in tDrrnln-::lt-inn nft-ho rnnt-r-::lrt- 'tATit-hnl1t- -::In'tT nnt-ira•• ~.~~.~..... ...~ • -b~' ~ ...... -~ ~.~ ... ~_ •••••••~~.~.. ~' ~•• ~ -~ .. ~. ~~~ ••• ~..~ - ~ .. ~ ~.~_.~ ~"J
17 OFFICIAL SECRECY
17.1 The documents/drawings/process sheet/test data are strictly confidential and the Service Provider or his employees shall not divulge any information that is made known to him or he has come across to any person not authorized to receive such information.
17.2 The SERVICE PRCiVIDER or his employees shall not take any document/process sheet/test data/Cli (USB, etc issued containing work details, outside the place of work.
17.3 The entire contract details shall be treated as strictly confidential and no information related to the same shall be parted with.
17.4 Any violation of secrecy, detected at any time of the contract, by the SERVICE PROVIDER or any of his employees may lead to termination of services of the employee/contract itself as deemed fit by LPSC. Any violation in this regard shall attract serious action.
Liquid Propulsion Systems Centre Page 11 of14
![Page 13: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/13.jpg)
~ Rev No. 00 [late I August 2017 I
18 GRIEVANCE REDRESSAL AND ARBITRATIONS
18.1 The provisions relating to grievance redressal mechanism, including the details of the authority, to whom a contractor/supplier may submit an application for review of any decision or action taken by the Centre/Unit, shall be incorporated in the Purchase Order/contract.
18.2 In the event of any question, dispute or difference arising out or or in connection with any of the terms and conditions of the purchase order/contract and the Centre/Unit & the supplier are not in a position to settle the dispute mutually, the matter shall be referred to the Head of the Centre/Unit for arbitration or as mutually agreed upon.
18.3 The award of the arbitrator shall be final and binding on both t ae parties to the contract. 18.4 The arbitration proceedings would be subject to the provis ions of the Arbitration &
Reconciliation Act, 1996, and the Rules framed there under.
19 OWNERSHIP
19.1 The personnel employed shall be employees of the SERVICE PFOVIDER and LPSC has no responsibility towards the SERVICE PROVIDER's employees.
20 SHORT CLOSING ITERMINATIONOFCONTRACT
20.1 Under normal circumstances, short-closing/termination of the contract is not envisaged. However, in case of continued non-performance of the contractor, resulting in inordinate delays in carrying out the activities or inability to perform the tasks as per requirements, in spite of repeated written requests, the Department reserves the right to terminate wholly or partly the contract.
20.2 Discrepancies, if any, shall be brought to the attention of the oarty who shall assess the same & give a feedback to LPSC on the cause &corrective measures taken.
20.3 In case of repeated discrepancies arising out of the work done by a particular person, the agency os-hall take- necessary action- to train- him to requisite level & in case of further I repeating of similar observations, take action to replace him, if asked for by LPSC.
20.4 In the event of short-closing/ termination of the Contract, the following procedure shall be followed;
20.4.1 LPSC shall give a notice of not less than one month.
20.4.2 On receipt of the notice, the contractor shall take all necessary steps for winding up of the contract in line with the notice within a rea.sonable period, but in any case not exceeding three months from the date of posting the notice.
20.4.3 The compensation to be paid to the contractor shall be agreed to by mutual negotiations.
Liquid Propulsion Systems Centre
A Page12 of 14
![Page 14: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/14.jpg)
Document No LPSC/CPES/OUTSOURCING/RFP/01/2017 Control Status Uncontrolled
Rev 1\10. 00 Date August 2017
20.4.4 LPSC shalln no circumstances be liable to pay any sum which, when added to the other slims paid, due or becoming due to the contractor under this contract, exceeds the amount specified in contract.
21 GENERAL TERMS AND CONDITIONS
21.1 The SERVICE PR:JVIDER shall ensure strict compliance with the provisions of the applicable Central/State Laws.
21.2 The personnel will be stationed only in areas identified for their work and shall not be allowed to pass into other areas without appropriate permission.
21.3 All facilities and utilities entrusted to the SERVICE PROVIDER should be handled with due care and caution and any liability whatsoever in nature due to mishandling or otherwise would be borne by the SERVICE PROVIDER. It is also agreed by and between the parties that in any case, any liability arises, neither LPSC/Government nor agent or representative ot LPSC/Government will be responsible for the same. In case it is assessed by the Government committee that the damages have been caused due to mishandling or otherwise by the SERVICE PROVIDER, the SERVICE PROVIDER will be liable to pay the entire damages to LPSC/Government.
21.4 In case of exigenc .es inside the campus, first aid, to the extent available will be provided during normal vzorking hours. For further medical treatment and for any other emergency beyor.d the working hours, the SERVICE PROVIDER shall make their own arrangement. NE cessary insurance coverage shall be provided by the SERVICE PROVIDER for their Personnel, while they are employed for work at LPSC Valiamala and deputed to other [SRO centres/Work centres as referred in para 3.12 & 3.13
21.5 Normal working hours: 08.45 hrs. To 17.15 hrs. (8 hrs working with halfan hour lunch break) with either 5 or 6 days per week as required. However the service provider may extend the service of their employees beyond the hours and days indicated, in case of any ex igency of work.
21.6 Transport: Traisport 'To Valiarnala' and 'From Valiamala' is in the SERVICE PROVIDER scope. LPSC transport facility will not be available for employees of SERVICE PROVIDER.
.. 21.7Departfhentcal1t~-enfacllttles available 'in the campus can be extended to the service provider's personnel, if required, at the rates fixed by department from time to time as applicable to sue npersonnel.
21.8 All the employees shall be provided with neat uniform and appropriate footwear by the service provider. All the employees shall compulsorily wear the uniform on all working days. Soiled & tc rn uniform shall not be allowed.
21.9 The employees shall be restricted to their area of work.
21.10 Identification cards (ID Cards) shall be provided by the SERVICE PROVIDER for all the employees positioned by it.
Liquid Propulsion Systems ::entre P;ll'''' 1 ~ nf 14
![Page 15: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/15.jpg)
--------------------------------------------------
00 ____~lDate
22 SUBMISSION OF BIDS: MOST IMPORTANT
This is a 2 part tender. Part I is Techno commercial bid & Part I [is Price bid. Part I shall contain all relevant information sought in this RFP,except the price. An unpriced price bid format shall also form part ofthe part I offer. The price bid format is enclosed in section 23. Part II shall contain the same price bid format attached in Part I, with only the addition of price in the relevant columns of the unpriced price bid.
PLEASE NOTETHAT ANYPART OF PRICE BEING PRESENTIN THE PART-I, WILL LEAD TO AUTOMATIC REJECTION OF THE OFFER.
23 PRICE BID FORMAT:
An unpriced price bid format is given below for reference, Part I of the offer shall clearly confirm that the price bid enclosed in part II is as per this format.
Price (in Rupees)51 Including GSTno.
01. Amortised man hour rate
Expenses for food &ApproxOutstation rate AccommodationNoof Travel
02. (Excluding amortised(lSRO Centres/Work Centres) ExpenseDays/ man day rate @ 8 hrs /
year day)
2.1 150*IPRC, Mabendragiri
60*2.2 SDSC, Sriharikota
LPSC/HAL Bangalore 60*2.3
Note:
1. The amortised man day rate shall be applicable for personne I when they are assigned to work at LPSC, Valiamala or at other work centres or ISRO Ce-ntres located in & around Thiruvananthapuram. No additional payment will be made towards this. I
2. Expenses for travel, food and accommodation shall be applies ble from date of journey, for outstation trips, which shall be quoted separately.
3. *Approximate Number of Anticipated trips to IPRC is 150 Ncs and for SDSC/SHAR & LPSC(B)/HAL Bangalore is 20 Nos per annum
Liquid Propulsion Systems Centre
Page 14 of 144-
![Page 16: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/16.jpg)
Annexure II T.E.No.TC212017030241
General Terms and C01ditions:
1. Earnest Money Deposit: Earnest Money Deposit amounting to Rs.5,OO,OOO/- shall invariably be submitted by
you along with your offer. Offer without EMD will be rejected. The EMD shall be
submitted in 1he form of Demand Draft/Bankers Cheque/FD receipts or Bank
Guarantee dr.iwn in favour of Accounts Officer, LPSC and payable at
Thiruvananthapuram. Submission of EMD is exempted in respect of Registered
vendors, Foreign vendors, CPSU/CPSE, MSE, KVIC, NSIC. Vendors seeking exemption
from payment of EMD shall submit necessary proof like registration number, copy of
relevant valid certificates along with your offer, failing which the said offer will be
rejected. The EMD of a vendor will be forfeited if the vendor withdraws or amends
their tender or deviates from the tender in any respect within the validity period of
the tender.
2. Purchase / Price Preference to MSEs Purchase/Price preference will be applicable to the product reservation admissible
to the Micro and Small Enterprises. Purchase/Price Preference shall be extended to
the MSEs under the Public Procurement Policy for MSEs formulated under the Micro,
Small and Medium Enterprises Development Act, 2006. The participating MSEs in a
tender, quoting price within the band of L-1 + 15% may also be allowed to supply a
portion of the requirement by bringing down their price to the L-1 price, in a
situation where L-1 price is from someone other than an MSE. Such MSEs may be
allowed to supply upto 20% of the total tendered value. In case of more than one
such eligible M;E, the supply will be shared equally..
3. Security Deposit On acceptance of the order, you shall submit an interest free amount equivalent to
10% of the tote I contract/order value towards security deposit. This security deposit
is collected towards the performance of the Contract. The said Security Deposit shall
be submitted either in the form of Bank Guarantee/Demand Draft/PDR receipts duly
endorsed in the name of the centre. The Security Deposit will be returned to you on
successful completion of the Contractual obligations; failing which it shall be
forfeited/adjus ted.
4. Offer Validity Your offer shal be valid for 120 days from the date of tender opening. In case you
offer validity less than 120 days, the said offer is liable for rejection which may
please be noted.
![Page 17: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/17.jpg)
5. liquidated Damages:
If you fail to de iver the ordered items satisfactorily within the time specified or any
extension thereof, liquidated Damage @ O.5%(zero point five percent) of the order
value or part tt ereof the un-delivered items for each calendar weeks of delay shall
be recovered from your bill. However total Liquidated Damage shall not exceed
lO%(ten percent) of the order value.
6. Tender fee Rs.5901- (Rupees Five Hundred and Ninety only) shall be payable only in
the form of Bank draft in favour of Accounts Officer, LPSC, Valiamala payable at
Trivandrum and the same shall be enclosed along with your offer, without which
your offer willllot be considered.
7. Payment terms: Payment would be made every month on prorate basis after certification of the work by the LPSC Contract Manager.
8. The rates shall he firm and fixed till completion of entire quantum of job.
9. The work shall he executed at LPSC Valiamala.
10. The work shall he carried out strictly to our satisfaction.
11. Insurance: You shall arrange personal insurance (All risk insurance coverage) for the labours being deployed for the work and produce certificates for verification before commencing the work at your cost.
12. You shall employ only qualified/experienced Indian Nationals. You shall follow the security guidelines of LPSC.
13. Other Terms and Conditions:
13.1 The Service Provider shall be bound by the details furnished by him/her to LPSC while submitting the tender or at subsequent stage. In case, any of such documents furnished by him/her is found to be false at any stage, it would be deemed to be a breach of terms of contract making him/her liable for legal action besides termination of the contract.
13.2 The Service Provider shall comply with all statutory rules and regulations in force in the country including labour and other laws/acts.
13.3 The contract me y be extended on the same terms and conditions for a further period of three more years with mutual consent and based on the performance and review at the end of 2nd
year, 3rd year ami 4th year.
13.4 The Service Provider who has been awarded with the contract shall not be allowed to transfer, assign, pledge or sub-contract its rights and liabilities under this contract toany other agency.
![Page 18: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/18.jpg)
13.5 The character arid other antecedents in respect of the Personnel being engaged shall be got verified through record check by the Service Provider from the concerned Police authorities, and a Police Clearance Certificate (PCC) obtained_and submit the Original PCC to LPSC within in one month from the date ofexecution ofContract.
13.6 LPSC, being a High Security area, the Service Provider, if selected, will be required to follow the security requirements, and the personnel engaged shall be possessing a valid 10 card issued by the Selvice Provider while entering the campus, maintaining high order of discipline while on duty and ensuring that only the Personnel whose character and antecedents are verified beforehard are employed.
14. Liabilities, Control etc. ofthe Persons Deployed:
14.1 The Personnel ergaged shall reach the work spot well in time and strictly follow the rules and regulations regarding safety and security ofthis office.
14.2 The Personnel engaged shall attend for duties by making their own transport arrangement. During Office hOL rs, medical assistance on emergencies in LPSC campus can be provided by the Department from the First Aid centre, Valiamala and beyond that the Service Provider has to take care.
14.3 The Personnel, once approved for the service, shall not be changed without the prior concurrence of idenflfled "Focal Point" in LPSC.
14.4 The Personnel engaged are not authorized tocommunicate to a third person about any official information they may come across during their working in the office. Further, they are not permitted to take out any files/documents/information{media pertaining to the Department. Towards this each Personnel engaged shall have to furnish a declaration, and any violation of this will attract le,~al action as deemed fit by the Department against the concerned Personnel and the Service Provider
14.5 The Service Privider shall be solely responsible for any theft, pilferage or misbehavior committed byany ofhis Personnel engaged for carrying out the work.
14.6 In case, the Personnel engaged by the Service Provider commits any act of omission/commission that amounts to misconduct/indiscipline/incompetence, the Service Provider shall be liable to take appropriate disciplinary action against such persons, including their removal from the duty. The Service Provider shall replace immediately any of his Personnel who iUare found unacceptable because of security risks, incompetence, conflict of interest improper conduct etc., upon receiving written notice from LPSC.
15. Legal
15.1 The Service Prc vider shall also be liable for depositing all statutory taxes; levies; cess etc., on account of service rendered to LPSC to the concerned authorities from time to time as per the extant rules and equlatons on the related subject.
![Page 19: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/19.jpg)
15.2 The Service Provider shall maintain all statutory registers under the applicable law. The Service Provider shall produce the same, on demand, to the concerned authority of LPSC or any other authority under the law.
15.3 The Income Tax atsource [TDS] shall be deducted as per the provisions of Income Tax Act as amended from true to time. Please mention PAN.
15.4 In case, the Eervice Provider fails to comply with any statutory/taxation liability under appropriate law,md as a result thereof, if LPSC is put into any loss/obligation, monetary or otherwise, LPSC shall have the right to recover such liability from the Service Provider.
15.5 The Service Provider shall be solely responsible for the redressal of grievances/resolution of disputes relating to the Personnel engaged in LPSC and LPSC shall, in no way, be responsible for the settlement of such disputes.
15.6 LPSC shall not Je responsible for any damage, losses, claims, financial or other injuries for any Personnel ir course of their performance of their duties or for payment towards any compensation.
15.7 The Service Frovider shall be responsible for any loss or damage caused to LPSC propertypersonnel due to the negligence ofthe Personnel and shall make good the losses.
15.8 For all intents and purposes, the Service Provider shall be "Employer" within the meaning of different Labour Legislations in respect of the Personnel engaged by the Service Provider at LPSC. The Pers )nnel engaged by the Service Provider in LPSC shall not have any claim whatsoever of Mt\STER and SERVANT relationship nor have any PRINCIPAL and AGENT relationship with oragainst LPSC.
15.9 In case of termir ation of the contract on its expiry orotherwise, the Personnel engaged bythe Service Provider shall not be entitled to and will have no claim whatsoever for any kind of regular ernployrrent in LPSC//SRO.
16 Terms and Conclitions orClauses not covered in this document:
Any other terms, conditions or clauses not covered in this document shall be in accordance with the concerne d Labour and other statutory rules/acts.
17. Termination ofcontract
17.1 LPSC reserves the right to terminate the contract wholly or partly without assigning any reasons by givin£ a prior notice of30 days.
17.2 LPSC reserves the right to terminate the contract wholly orpartly owing tocessation ofjob requirement, sub-standard quality of Personnel enqaqed, breach ofcontract.
18. Indemnity Bond
The Service Provider shall indemnify LPSC on Rs. 200/- Non Judicial Stamp Paper against any action, claims 01 proceedings relating to infringement of all or any of the prevailing laws
![Page 20: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/20.jpg)
including various labour and related laws/acts. The Indemnity Bond has to be executed as per our specimen.
19. Jurisdiction
The Courts withi 1 Thiruvananthapuram will have the Jurisdiction to deal with and decide any matter arising ou: of this contract.
20. Applicable Law
The contract sha I be interpreted, construed and governed bythe Laws of India.
21. Arbitration:
In the event of (my dispute or difference relating to the interpretation and application of the contract, such dispute or difference shall be settled amicably by mutual consultations of the good offices of the respective parties. If such a resolution is not possible, then the unresolved dispute or dllference shall be referred to the Sole Arbitrator appointed by Director, LPSC in accordance with the rules and procedures of Arbitration and Conciliation Act, 1996 or any modification thereof. The decision of the Arbitrator shall be final and binding on both the parties. The expenses for the Arbitration shall be paid as may be determined bythe Arbitrator. The Arbitration shall be conducted in Thiruvananthapuram.
22. Non Disclosure Agreement:
The Service Pro zlder and the Personnel engaged by the Service Provider for executing the Service Contract in ISRO/LPSC shall sign a Non-Disclosure Agreement. It shall be the Service Provider's responsibility to get the signature of their Personnel on the Non Disclosure Agreement and submit the same to the ISRO/LPSC. Any violation in this regard will result in the termination O' the Contract without any notice
23. Compensation "or Damages caused forPersons Goods, Property:
23.1 LPSC and/or my Officer, Employees or assignee thereof, shall be indemnified and held harmless, aqainst any loss, damage or expense reSUlting from damage to property or personnel injury ;lrising out ofwillful misconduct or gross negligence of the Service Provider or their personnel ill the execution of the work under this Contract. You shall, at your expense defend any suit or proceedings brought against LPSC on account thereof, and shall satisfy all jUdgment and pa( all expenses, which may be incurred by or rendered against them, or any of them in connection therewith.
23.2 LPSC shall not be responsible of any damages, loss, claims, finance and other injury for any Personnel in cc urse of their performance of their duties or for payment towards any compensation.
![Page 21: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/21.jpg)
24. LPSC will pro-ide Canteen facility to the Personnel at the appropriate rate fixed by the Department, as cpplicable tosuch category ofpersonnel.
25. Identity Card
The Personnel shall be provided by Identity Card by the Service Provider and each of them shall display the r identity card while on duty at the premises of LPSC. The Service Provider shall ensure thai all Personnel are strictly adhering to the same. To enable the Personnel to enter LPSC Office premises through security gates, a suitable mechanism will be adopted by the Department.
R.S. Sandhya) Purchase and Stores Officer
For and on behalf of the President of India (The Purchaser)
![Page 22: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/22.jpg)
Annexure-III to T.E.No.TC21 2017030241
INSTRUCTIONS FOR TWO PARTTENDERS.
1. We invite your offer duly signed, in TWO parts as follows:
(a) PART- I : TECHNICAL & COMMERCIAL (Other than Price)
(b) PART-II : PFJCE BID
1.1 PART-I: TECHNICAL & COMMERCIAL
1.1.1 TECHNICAL: The detailed Scope of work and other technical details for the proposed
Outsourcing fOI assisting in Cryo Engine & Stage Realization activities as detailed in
RFP as per Annexure I, and Commercial Terms as per Annexure II shall be covered in
this part. Pleas~ enclose a copy of the details indicated in price quotation (WITHOUT
PRICES OR BY MASKING THE PRICE) mainly to know the items/ services for which
you have indicated prices in price bid. This part should not contain prices. The
Technical and ':ommercial part of the offer should be kept in a sealed envelope
superscribing the following details.
QUOTATION AGAINST TENDER NO TC21 201703024101
DUE ON 02.11.2017 at 16.00 hrs 1ST
OPENING ON 03.11.2017 at 10.30 hrs 1ST
OUTSOURCING FOR ASSISTING IN CRYO ENGINE & STAGE REALIZATION
PART I • TECHNICAL & COMMERCIAL
The cover should indicate" SENDER'S" address.
1.2. PART-II : PRICE BID
1.2.1. This part shall ontain PRICE details only.
1.2.2. The price for the item should be indicated item wise in this part as per the price format. All the items/ services mentioned in the Technical Part should come here and prices indicated against each. The break-up for each item or services should be indicated.
1.2.3. Whenever options are quoted, the same should also be indicated with quantity and unit rate separately. The prices are to be mentioned both in figures and in words. This part shoulc also be kept in a sealed cover superscribing as follows:
![Page 23: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/23.jpg)
QUOTATION AGAINST TENDER NO TC21 201703024101
DUE ON 02.11.2017 at 16.00 hrs 1ST
OPENING ON 03.11.2017 at 10.30 hrs 1ST
OUTSOURCING FOR ASSISTING INCRYO ENGINE & STAGE REALIZATION
PART II• PRICE BID
THE TWO SEALED CO\iERS PREPARED AS ABOVE SHOULD BE KEPT IN ANOTHER ENVELOPE,
SEALED AND SUPERSCHIBED AS UNDER:
"Quotation against Tender No. TC21 201703024101 Due on 02.11.2017 at 16.00 hrs 1ST for
OUTSOURCING FOR ,,\SSISTING IN CRYO ENGINE & STAGE REALIZATION ACTIVITIES
containing TWO SEPAF:ATE COVERS PART-1 & PART -II and addressed to:
SR.PURCHASE & STORES OFFICER Liquid Propulsion Systems Centre
Valiamala (PO) Thriuvananthapuram- 695547.
The cover should indicate " SENDER'S" address
For any clarification you may contact us at following phone/Fax Nos.
Telephone: 0471!567726/0471 2567727
Fax: 0472 2300712/0471 2567305
Your offer should reach us on or before the due date and time i.e. 02.11.2017 at 16.00 hrs
1ST. Offers received after the due date and time will nat be considered.
Offers received through fax or email will not be considered.
Tender fee Rs.590/- (Rupees Five Hundred and Ninety only)(lnciuding GST) shall be payable only in the form of Bank draft in favour of Accounts Officer, LPSC, Valiamala payable at Trivandrum and the ~,ame shall be enclosed along with Part-I, Techno-Commercial Bid, without which your offer will not be considered.
![Page 24: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/24.jpg)
GOVERNMENT OF INDIA DEPARTMENT OF SPACE
LIQUID PROPULSION SYSTEM CENTRE PURCHASE DIVISION
VALIAMALA P.O. THIRUVAI'JAI'JTHAPURAM
Tender No : TC21 2017030241 01 Due on : 02.11.2017 Ref. No . Date .
TENDER FORM From :
To: The Purchase & Stores Officer, Liquid Propulsion Systems Centre Valiamala P.O. Thiruvananthapuram - 695547
Dear Sir,
I/We hereby offer to SLpply the stores detailed below at the price hereunder quoted and agree to hold this offer open till I/We shall be bound to supply the stores hereby offered upon the issue of the Pirchase Order communicating the acceptance there ofon or before the expiry of the last mentioned date. You are cit liberty to accept anyone or more of the items of stores tendered for orany portion of anyone or more of the iterns of such stores. I/We notwithstanding that the offer in this tender has not been accepted in whole, shall be bo md to supply to you such items and such portion or portions of one or more of the items as may be specified in thl~ said Purchase Order communicating the acceptance:
SI. Description Quantity Unit Rate Delivery l'Jo. Rs. Date
NOTE: All the rates should be ~Iiven both in figures and words.
Place atwhich delivery will be rnade: , Date by which the ordered items will be supplied: ..
2.llWe have understood the items of the tender annexed to the invitation to tender and have thoroughly examined the specification/drawing and / Jr pattern quoted or referred to herein and fare fully aware of the nature of the stores required and my/our offer is to supply the stores strictly in accordance with the requirements subject to the terms and conditions stipulated in the enquiry and contained in the purchase order communicating the acceptance of this tender either in whole or in part.
Signature ofTenderer Date ..
(Seal)
![Page 25: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/25.jpg)
GOVERNMENT OF INDIA DEPARTMENT OFSPACE
LIQUID PROPULSIONS SYSTEMS CENTRE PURCHASE AND STORES DIVISION
1. Tenders shoulc be sent in sealed envelopes superscribing the relevant tender No, and the due da:e of opening. Only one tender should be sent in each envelope.
2. Late tenders and delayed tenders will not be considered.
3. Taxes, legally leviable and intended to be claimed should be distinctly shown separately in the tender.
4. a) Your quotation should be valid for 120 days from the date of opening of the tender or any )ther period as specified in the tender enquiry. Offer with validity lesser than thaI specified is liable for exclusion from the procurement process.
b) Prices 2 re required to be quoted according to the units indicated in the annexed tender form. When quotations are given in terms of units other than those specified in the tender form, relationship between the two sets of units must be furnished.
5. (a)AII available technical literature, catalogues and other data in support of the specificatic ns and details of the items should be furnished along with the offer.
(b) Samples. if called for, should be submitted free of all charges by the tenderer and the Purchaser shall not be responsible for any loss or damage thereof due to any reason whatsoever. In the event of non-acceptance of tender, the tenderer will have to remove the samples at his own expense.
(c) Approxlnate net and gross weight of the items offered shall be indicated in your of'er. If dimensional details are available the same should also be indicate:! in your offer.
(d) Specifications: Stores offered should strictly confirm to our specifications. Deviaticns, if any, should be clearly indicated by the tenderer in his quotation. The tenderer should also indicate the Make/Type number of the stores offered and provide catalogues, technical literature and samples, wherever necessary, along with the quotations. Test Certificates, wherever necessa'y, should be forwarded along with supplies. Wherever options
![Page 26: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/26.jpg)
have be en called for in our specifications, the tenderer should address all such options. Wherever specifically mentioned by us, the tenderer could suggest changes to specifications with appropriate response for the same.
6. The purchaser shall be under no obligation to accept the lowest or any tender and reserves the right of acceptance of the whole or any part of the tender or portions of the quantity offered and the tenderers shall supply the same at the rates quoted.
7. Corrections, if cny, must be attested. All amounts shall be indicated both in words as well as in figures. Where there is difference between amount quoted in words and figures, amourr: quoted in words shall prevail.
8. The tenderer should supply along with his tender, the name of his bankers as well as the latest lnco ne-Tax clearance certificate duly countersigned by the Income-Tax Officer of the Circle concerned under the seal of his office, if required by the Purchaser.
9. The Purchaser reserves the right to place order on the successful tenderer for additional quantity up to 25% of the quantity offered by them at the rates quoted.
10. The authority of the person signing the tender, if called for, should be produced.
TERMS & CONDITIONS OF TENDER 1. DEFINITIONS:
(b) The term 'Purchaser' shall mean the President of India or his successors or assigns. (c) The term 'Contractor' shall mean, the person, firm or company with whom or with
which the order for the supply of stores is placed and shall be deemed to include the Contractc r's successors, representative, heirs, executors and administrators unless excluded by the Contract.
c) The term 'Stores' shall mean what the Contractor agrees to supply under the Contract as;pecified in the Purchase Order including erection of plants & machinery and subsequent testing, should such a condition is included in the Purchase Order.
d) The term 'Purchase Order' shall mean the communication signed on behalf of the Purchaser by an Officer duly authorised intimating the acceptance on behalf of the Purchaser on the terms and conditions mentioned or referred to in the said communicatic n accepting the tender or offer of the Contractor for supply of stores or plant, mad inery or equipment or part thereof.
2. PRICES:
Tender offering firm prices will be preferred. Where a price variation clause is insisted upon by a tenderer, quotation with a reasonable ceiling should be submitted. Such offers should Invarlablv be supported by the base price taken into account at the time of tendering and also tre formula for any such variation/so
![Page 27: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/27.jpg)
3. SECURITY DEPOSIT:
On acceptance of the tender, the Contractor shall, at the option of the Purchaser and within the period specified by him, deposit with him, in cash or in any other form as the Purchaser may determine, security deposit not exceeding ten percent of the value of the Contract as the Purchaser shall specify. If the Contractor is called upon by the Purchaser to deposit, 'Security' and the Contractor fails to provide the security within the period specified, such failure shall constitute a breach of the Contract, and the Purchaser shall be entitled to make other arrangements 10r the re-purchase of the stores Contracted at the risk of the Contractor in terms of Sub-Clause (ii) and (iii) of clause 10(b) hereof and/or to recover from the Contractor, damages arising from such cancellation.
4. GUARANTEE & REPLACEMENT:
(a) The Contractor shall guarantee that the stores supplied shall comply fully with the specifications laid down, for material, workmanship and performance.
(b) For a period of twelve months after the acceptance of the stores, if any defects are discovered the "ein or any defects therein found to have developed under proper use, arising fron faulty stores design or workmanship, the Contractor shall remedy such defects at his own cost provided he is called upon to do so within a period of 14 months from t-ie date of acceptance thereof by the purchaser who shall state in writing in what respect the stores or any part thereof are faulty.
(c) If, in the opinion of the purchaser, it becomes necessary to replace or renew any defective store; such replacement or renewal shall be made by the Contractor free of all costs to the purchaser, provided the notice informing the Contractor of the defect is given by the purchaser in this regard within the said period of 14 months from the date cf acceptance thereof.
(d) Should the Contractor fail to rectify the defects, the purchaser shall have the right to reject or repair or replace at the cost of the Contractor the whole or any portion of the defective stores.
(e) The decision 01 the purchaser notwithstanding any prior approval or acceptance or inspection thereof on behalf of the purchaser, as to whether or not the stores supplied by the Contractor are defective or any defect has developed within the said period of 12 m onths or as to whether the nature of the defects requires renewal or replacement, shall be final, conclusive and binding on the Contractor.
(f) Performance Bank Guarantee: To fulfil guarantee conditions outlined in clause 4 (a) to (e) above, the Contractor shall, at the option of the purchaser, furnish a Bank Guarantee (as prescribed by the purchaser) from a Bank approved by the purchaser for an amount equivalent to 10% of the value of the Contract along with first shipment documents. On the performance and completion of the Contract in all respects, the ~ank Guarantee will be returned to the Contractor without any interest.
![Page 28: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/28.jpg)
(g) All the replacement stores shall also be guaranteed for a period of 12 months from the date of arrival of the stores at purchaser's site.
(h) Even while the 12 months guarantee applies to all stores, in case where a greater period is called for by our specifications then such a specification shall apply in such cases the perio:l of 14 months referred to in para 4 (b) & (c) shall be the 'asked for' guarantee period plus two months.
5. PACKING FORWARDING & INSURANCE:
The Contractor will be held responsible for the stores being sufficiently and properly packed for transport by rail, road, sea or air to withstand transit hazards and ensure safe arrival at the destination. The packing and marking of packages shall be done by and at the expense of the Contractor. The purchaser will not pay separately for transit insurance, all risks in transit being exclusivelv of the Contractor and the Purchaser shall pay only for such stores as are actually received in good condition in accordance with the Contract.
6. DESPATCH:
The Contractor is responsible for obtaining a clear receipt from the Transport Authorities specifying the goods despatched. The consignment should be despatched with clear Railway Receipt/Lorry Receipt. If sent in any other mode, it shall be at the risk of the Contractor. Purchaser will take no responsibility for short deliveries or wrong supply of goods when the same are booked on 'said to contain' basis. Purchaser shall pay for only such stores as are actually received by them in accordance with the Contract.
7. TEST CERTIFICJ!,TE:
Wherever required. test certificates should be sent along with the despatch documents.
8. ACCEPTANCE CF STORES:
(a) The stores shall be tendered by the Contractor for inspection at such places as may be specified by the purchaser at the Contractor's own risk, expense and cost.
(b) It is expressly cgreed that the acceptance of the stores Contracted for, is subject to final approval ty the purchaser, whose decision shall be final.
(c) If, in the opini In of the purchaser, all or any of the stores that do not meet the performance 0' quality requirements specified in the Purchase Order, they may be either rejected or accepted at a price to be fixed by the purchaser and his decision asto rejection and the prices to be fixed shall be final and binding on the Contractor.
(d) If the whole or any part of the stores supplied are rejected in accordance with Clause No.8 (c) above, the purchaser shall be at liberty, with or without notice to the
![Page 29: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/29.jpg)
Contractor, to purchase in the open market at the expense of the Contractor stores meeting the necessary performance and quality Contracted for in place of those rejected, provided that either the purchase, or the agreement to purchase, from another supplie-r is made within six months from the date of rejection of the stores as aforesaid.
9. REJECTED STOF:ES:
Rejected stores will remain at destination at the Contractor's risk and responsibility. lif instructions for thei - disposal are not received from the Contractor within a period of 14 days from the date of -eceipt of the advice of rejection, the purchaser or his representative has, at his discretion, the right to scrap or sell or consign the rejected stores to Contractor's address at the Contractor's entire risk and expense, freight being payable by the Contractor at actuals.
10. DELIVERY AND LIQUIDATED DAMAGES:
(a) The time for ar d the date of delivery of the stores stipulated in the Purchase Order shall be deemed to be the essence of the Contract and delivery must be completed on or before ths specified dates.
(b) Should the Cor tractor fail to deliver the stores or any consignment thereof within the period prescribed for such delivery, the purchaser shall be entitled at his option either.
(i) to recover from the Contractor as agreed liquidated damages and not by way of penalty, a sum of 0.5% per week of the price of any stores which the Contractor has failed to deliver as aforesaid or during which the delivery of such stcre may be in arrears subject to a minimum of 10%, or
(II) to purchase from elsewhere, without notice to the Contractor on the account and at :he risk of the Contractor, the stores not delivered or others of a similar description (where others exactly complying with the particulars, are not, in 1he opinion of the purchaser, readily procurable, such opinion being final) w thout cancelling the Contract in respect of the consignment (s) not yet due for delivery, or
(iii) to cancel the Contract or a portion thereof and if so desired to purchase or authorise the purchase of stores not so delivered or others of a similar description (where others exactly if complying with the particulars are not, in the opinion of the purchaser, readily procurable, such opinion final) at the risk and cost of the Contractor.
In the event of action being taken under sub-clause (ii) & (iii) of clause 10 (b) above, the Contractor shall be liable for any loss which the purchaser may sustain on that account, provided that the reo purchase or if there is an agreement to re-purchase then such agreement is made within six months from the date of such failure. But the Contractor shall
![Page 30: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/30.jpg)
not be entitled to any gain on such re-purchase made against default. The manner and method of such re-purchase shall be at the discretion of the purchaser, whose decision shall be final. It shall not be necessary for the purchaser to serve a notice of such re-purchase on the defaulting Contractor. This right shall be without prejudice to the right of the purchaser to recover damages fOI breach of Contract by the Contractor.
11. EXTENSION OF TIME:
As soon as it is apparent that the Contract dates cannot be adhered to, an application shall be sent by the Contractor to the purchaser. If failure, on the part of the Contractor, to deliver the stores in proper time shall have arisen from any cause which the purchaser may admit as reasonable ground for an extension of the time (and his decision shall be final) he rnav allow such additional time as he considers it to be justified by circumstances, of the case without prejudice to the purchaser's right to recover liquidated damages under clause 10 thereof.
12. ERECT/OI\! OF PLANT & MACHINERY:
Wherever erection of a plant or machinery is the responsibility of the Contractor as per the terms of the Contract and in case the Contractor fails to carry out the erection as and when called upon to do so within the period specified by the purchaser, the purchaser shall have the right to get the erection done through any source of his choice. In such an event, the Contractor ~ hall be liable to bear any additional expenditure that the purchaser is liable to incur towards erection. The Contractor shall, however, not be entitled to any gain due to such an action t,y the purchaser.
13. PAYMENT:
Contractor's bil will be passed for payment only after the stores have been received, inspected and accepted by the Purchaser.
14. MODE OF PAYMENT:
Normally pavrnsnt will be made for the accepted stores within 30 days from the date of receipt of the materials.
15. RECOVERY OF SUM DUE:
Whenever any claim for the payment of, whether liquidated or not, money arising out of or under this ':ontract against the Contractor, the purchaser shall be entitled to recover such sum by appropriating in part or whole, the security deposited by the Contractor, if a security is taken against the Contract. In the event of the security being insufficient or if no security has been taken from the Contractor, then the balance or the total sum recoverable as the case may be, shall be deducted from any sum then due or which at any time the reafter may become due to the Contractor under this or any other Contract with the purchaser. Should this sum be not sufficient to cover the full amount
![Page 31: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/31.jpg)
recoverable, the Contractor shall pay to the purchaser on demand the remaining balance due. Similar/y, if the purchaser has or makes any claim, whether liquidated or not, against the Contractor underanv other Contract with the purchaser, the payment of all moneys payable under the Contract to the Contractor including the security deposit shall be withheld till such claims of the purchaser are finally adjudicated upon and paid by the Contractor.
16. INDEMNITY:
The Contractor shall warrant and be deemed to have warranted that all stores supplied against this Contract are free and clean of infringement of any Patent, Copyright or Trademark, and shall at all times indemnify the purchaser against all claims which may be made in respect of the stores for infringement of any right protected by Patent Registration of design or Trade ma-k and shall take all risk of accidents or damage which may cause a failure of the supply from whatever cause arising and the entire responsibility for sufficiency of all means used by hi 11 for the fulfilment of the contact.
17. ARBITRATION:
In the event of any question, dispute or difference arising under these conditions or any conditions contained in the Purchase Order or in connection with this Contract (except as to any matter the decision of which is specially provided for by these conditions), the same shall be referred to the sole arbitration of the Head of the Purchase office or some other person appointed by him. It will be no objection that the arbitrator is a Government servant, that he had tc deal with matter to which the Contract relates or that in the course of his duties as Government servant he has expressed views on all or any other matters in dispute or difference. The award of the arbitrator shall be final and binding on the parties of this Contract.
If the arbitrator be the Head of the Centre/Unit
(i) In the event of his being transferred or vacating his office by resignation or otherwise, it shall be lawful for his successor-in-office either to proceed with referenc e himself, or to appoint another person as arbitrator, or
(ii) In the event of his being unwilling or unable to act for any reason, it shall be lawful lor the Head of the Centre/Unit to appoint another person as arbitrato r.
If the arbitrator be a person appointed by the Head of the Purchase Office - In the event of his dying, neglecting or refusing to act or resigning or being unable to act, for any reason, it shall be lawful for the Head of the Centre/Unit either to proceed with the reference himself or appoint another person as arbitrator in place of the outgoing arbitrator.
![Page 32: GOVERNMENT OF INDIA Ph No: DEPARTMENT OF · PDF fileOUTSOURCING FOR ASSISTING IN CRYO ENGINE ... personnel in carrying out tasks related to Cryogenic Engine ... Providing inputs/support](https://reader031.fdocuments.in/reader031/viewer/2022030506/5ab412447f8b9a1a048b8e77/html5/thumbnails/32.jpg)
Subject as aforesaid the Arbitration & Conciliation Act 1996 and the rules thereunder and any statutory modifications thereof for the time being in force shall be deemed to apply to the arbitration proceedings under this Clause. The Arbitrator shall have the power to extend with the conse-nt of the purchaser and the Contractor the time for making and publishing the award. The venue of arbitration shall be the place as purchaser in his absolute discretion may determine. Work under the Contract shall, if reasonably possible, continue during arbitration proceedings.
In the event of any dispute or difference relating to the interpretation and application for the pro Jisions of the Contracts, such dispute or difference shall be referred by either party to Aroltration of one of the Arbitrations in the Department of Public Enterprises. The Arbitration Act 1996 shall not be applicable to arbitration under this clause. The award 0: the Arbitrator shall be binding upon the parties to the dispute provided however any party aggrieved by such award may make a further reference for setting aside or revision of the award to the Law Secretary, Department of Legal Affairs. Ministry of Law & Justi :e, Govt. of India. Upon such reference, the dispute shall be decided by the Law Secretary 0 r the Special Secretary / Additional Secretary when so authorized by the Law Secretary, whc se decision shall bind the parties finally and conclusively. The parties to the dispute will shar e equally, the cost of arbitration as intimated by Arbitrator.
18. COUNTER TERMSAND CONDITION OF SUPPLIERS:
Where counter terms and conditions printed or cyclostyled conditions have been offered by the supplier, the same shall not be deemed to have been accepted by the Purchaser, unless specific written acceptance thereof is obtained.
19. SECURITY FORI'URCHASE OF MATERIALS:
Successful tenderer will have to furnish in the form of a bank guarantee or any other form as called for b~ the purchaser towards adequate security for the materials and properties provided by the Purchaser for the due execution of the Contract.
***