Good Safety Practice in Toll Collection System and ... · Working at height Mobile or elevated ......
-
Upload
hoangquynh -
Category
Documents
-
view
214 -
download
0
Transcript of Good Safety Practice in Toll Collection System and ... · Working at height Mobile or elevated ......
Mr. Kris LEUNGEngineering Manager
email: [email protected]
© Autotoll Limited 2017
18 October 2017
Good Safety Practice in Toll Collection System and
Electronic Toll Collection System Installations at Tsing Ma Control Area
Project BackgroundToll Collection System Installation at Lantau Toll Plaza
Kowloon bound: K1 - K12 (12 sets) Airport bound: A8 - A20 (13 sets)
Toll Collection System Installation at Ma Wan Toll PlazaMa Wan bound: M1 & M2 (2 sets)Kowloon bound: M3 & M4 (2 sets)
Electronic Toll Collection System Installation at Lantau Toll Plaza (for two-way toll collection)
Airport bound: A12, A18 & A19 (3 sets)
Electronic Toll Collection System Installation at Ma Wan Toll Plaza (for two-way toll collection)
Kowloon bound: M3 & M4 (2 sets)
Location Plan and Bird’s Eye View of the Site
Location Plan and Bird’s Eye View of the Site
Lantau Toll Plaza
Ma Wan Toll Plaza
Autotoll LimitedAutotoll Limited
Toll Collection SystemIntelligent Transportation System (ITS) Telematics Service PlatformEV Charging Platform
International CertificationISO 9001:2008 ISO 14001:2004OHSAS 18001:2007
Major Site Works
InstallationToll island,Toll booth,Toll plaza canopy,Carriageway &Administration Building
Safety Training
Induction training for new comersRegular Toolbox TalksSite Specific Safety Training/ Toolbox Talks conducted by TIML
Safety Promotion
Adopt Safety Bulletin Board with statisticsEncourage the use of mobile Safety App from CIC (through QR code printed on Site Worker Caring Card for easy download)Circulate work safety alerts stored in vehicle and control room
Guidance to new comersSite Specific Notes with useful guidelines, contacts and emergency procedureSite Worker Caring Card highlighting key site specific elements
Pre-work arrangement
Exercise before work Qigong practice to promote healthy lifestyleJob debriefPre work risk assessment (PWRA)Suitable PPE check
Safety Facility
Suitable Personnel Protection Equipment (PPE)Enhanced PPE: helmet with Y-type chin strap, sunshade brim and neck protectorFirst aid box with competent staff contacts
Safe Site Management (I)
Enhance site communicationSite-in-charge contact is placed in proper signs at different working areas to enhance communication with other parties at site
Identify work statusProper signs are displayed to indicate the status of work at different working areas (e.g. work in progress, testing in progress, etc.)
Safe Site Management (II)
Identify the work area (esp. Hazardous Area)
Proper labels are placed to delineate the responsible party of the corresponding site
Properly cover the work using reusable PVC trunking boards before making good the trench work
Regularly apply larvicidal oil and remove stagnant water after rainy day to combat mosquitoes, spreading Dengue and Zika
Safety Site Management (II)
Site Safety
Segregation of Traffic –Cones and tape to alert site personnel not to enter adjacent lanes with live trafficCone-off area would be extended for early traffic diversion for high speed vehicles using ETC lanesNight work with limited working window for fast lane with ETC service
Carried out by Registered Electrical Workers (REW)All electrical tools are AC110V (low voltage) or re-chargeable/ cordless type.
Electrical works
Working at height
Mobile or elevated platform operated by competent personSling for Hand Tools to prevent falling object Adoption of platform ladder
Working in hot weather
Job rotationSheltered work areaSheltered rest area, drinking water, washing facility powered by TIML
Provision of sufficient welfare facilities
SSEC meetingSSEMC meetingSafety walk
Safety monitoring measures
Promotion of “Care of Workers Opinion” award to collect frontline workers’ opinions on safety through questionnaire
Silicone sweatband was adopted Diverging sweat away from worker’s eyes which may affect work safety
Innovative and creative safety measures (I)
Site Safety Slogan Design Award
Outstanding Safety Staff Award assessed by TIML through questionnaire
Innovative and creative safety measures (II)
QR codes on equipment that link to information on how to use equipment appropriately
Innovative and creative safety measures (III)
Tailor-made safety shock absorbers with safety stickers and recycled foams
Innovative and creative safety measures (IV)
Thank You !