GoldRays is the major manufacturer of shower and bath...

GoldRays is the major manufacturer of shower and bath seals in China, we pride ourself in offerring the most comprehensive range of shower seals in the industry.

[Materials]■ Our seals are made of high grade PVC or EVA materials and have excellent durability and strength. Each of our products are subjected to a strict quality control procedure. ■ Anti-UV and antioxidant additives are added during the manufacturing process to prevent the seals from getting yellow or white in outdoor or damp conditions.

[Eco-friendly] Made from the best available eco-friendly materials, the seals are environmental protecting with RoHS certificate.

[Usage] For etched glass, obscured or translucent glass, most seals work with all straight and most curved screens.

[Color] The standard color of our seals is translucent with a hint of light blue, Leaves a clear 'all-glass' appearance. Magnetic seals can be extruded in dual or triple colors (translucent PVC, white or black magnet)

[Installation] All our seals are easy to fit as they simply push or slide onto the glass. No gluing needed.

[Extrusion] Most seals can be extruded flexible or rigid.

[Package details] Most seals are straight and cut to meet your length requirement

[Stock] Most standard items are stocked in small quantities. Non-stock items and larger orders take 1-2 weeks.

[Customization]If you are looking for models that are not shown in this catalogue, we’d love to produce based on your drawing and specification. Please contact us and we are more than happy to share our professional advice and knowledge.

Introduction

004

Hinge side

Strike side

E032D E032

E027

E073

013

003 005 006

007A 011A 015B015

Hinge side

001 003 003A 003B

007

002

!!!

SlidingDoors

FoldingDoors

004 009 009A 009A1

009B1 009B 009C 009D1 009W 027A H1007

011B 014 015

003 003A 003B 006

E027E017

E017

013A E027 E025

E073

E059

E032D

E032D E032

E032

E022015

013

Click me !

005A 007 007G005003002Bottom Sealsworking as door sweeps

001

Glass Clip SealsClipped onto glass edge, no glue no tool needed.

Plastic Seal Strips IProfessional glass seals made of clear or color PVC and EVA materials. Click on below model

SwingingDoors

Strike side

007 007A

015B

005

005A

004

PVC or EVA Channel Seals Slided into metal Channel

E059

E032D E032 L012

007A

E091 E027

E091

010

Protector & Connector

Glass Clip SealsClipped onto glass edge, no glue no tool needed.

PVC or EVA Channel Seals Slided into metal Channels

Click me !

Bathtub Seals & shower tray seals Miscellaneous Items

Plastic Seal Strips II

006 U10mmU8mmbU8mma

026

019 F023 L759A 029

010 010A E035

018 U5mm U6mm

E024E028E021

E037A E037B E051E045 F058 E070

At strike sideagainst the wall

Model 001Translucent PVC seals with rigid U profile and soft lower sealing fin. Working with swinging doors, it has 2 use:1. For glass-to-floor application as a bottom seal, the lower

lip bridges the gap between the bottom edge and the floor. 2. Vertically clipped onto the strike side of a swinging door

and the soft fin forms a good seal on the wall (or glass panel).

See CAD drawings in next page

#001 ApplicationBack to Index

For swinging doorsas bottom seals

6mm 8mm 10mm 12mm

#001 CAD drawingsRigid

Soft

Back to Index

Model 002A unique designed PVC seal with a side fin which has a short curved rigid part and a long straight soft part. It has 2 uses:

Application 1: Clip the seal onto the hinge side of a glass swinging door and the soft fin forms a good seal on the wall (or glass panel) when the door is closed.

At hinge side

See how it works as a bottom sweep

#002 Application 1 Back to Index

Model 002

Application 2:

It can be used as a bottom sweep when the gap between

the door and the floor is very large, the soft fin can be

easily trimmed to size for small gap though. The angled

side fin works as a drip rail deflecting running water back

to the shower tray far away from the outside to minimize

the chance of water splashing out.

as bottom sweeps


Model 003 Translucent pvc h profiles with side fins. The "U" portion is rigid and the fin could be made of hard or soft vinyl, there is also a half-hard-half-soft version(see the picture in next page). This seal has 4 uses:

[For doors swinging one way]Application 1: Glass to wall/fixed panel application, at conners from 90 to 135 degrees;Snap onto the door with the fin on the hinge side. The soft fin forms a good seal on the wall or fix panel when the door is closed.

At hinge sidefrom 90 to 135 degrees

#003 Application 1

more application in next page

Back to Index

Model 003

[For doors swinging one way]Application 2: 180 degrees inline glass to glass application

Snap onto a fixed panel inline with the door and the fin on the strike side.

It will create a seal between the two pieces of glass. Use a soft fin version

for quieter door closure, while a rigid fin seal (the entire “h” jamb is made

of hard polycarbonate) provides a strong cushioning of the closing. The fin

with a hard and a soft section is ideal to form a good seal.

At strike sideclipped onto fixed panel

soft

rigid

more application in next page


Model 003

[For doors swinging one way]

Application 3: Glass to floor application

Snap onto the bottom edge of the glass door with the lip working as a

bottom sweep.

[For folding door]

Application 4: Snap it onto an overlapping bi-fold door and the soft fin

acts as a seal.

See CAD drawings in the next page

#003 Application 3&4

For folding doors

For Swinging DoorsAs Bottom Seals

Back to Index

6mm 8mm 10mm 12mm


Soft

rigid or soft rigid or soft rigid or soft rigid or soft

Back to Index

Model 003A

Translucent PVC h seals with a rigid fin and soft stopper on the fin. Application 1: Used between fixed panel and a swinging door in 180 degree alignment to prevent water escaping. Snap it onto the fixed panel with the fin on the strike side. The rigid vinyl fin makes a firm cushion. The soft stop helps cushion door closure, reduce noise and it forms a good seal on the fixed panel.

Application 2: Snap it onto an overlapping bi-fold door and the fin acts as a seal.

For folding doors

At strike sideclipped onto fixed panel

See CAD drawing in next page

#003A ApplicationBack to Index

6mm 8mm 10mm 12mm

#003A CAD drawings Rigid

Soft

Back to Index

Model 003BTranslucent rigid h seals with a soft cushion fin.

Application 1: For use on inline glass-to-glass installations between fixed panel and a swinging door in 180 degree alignment to prevent water escaping. Snap it onto the fixed panel with the fin on the strike side. The soft fin helps cushion door closure, reduce noise and it forms a good seal on the fixed panel.

Application 2: Snap it onto an overlapping bi-fold door and the fin acts as a seal.

#003B Application At strike sideclipped onto fixed panelFor folding doors

Back to Index

Model 004

Translucent PVC F profile with soft fin. It has 3 uses:

Application 1: For sliding glass doors;Working as a pair on sliding shower doors, wether they are for straight, corner opening or curved sliding enclosures, this set of seals push onto the edge of the sliding doors to prevent water running through the gap.See 011B and 014

See more applications in next page

#004 Application 1For sliding doors

Back to Index

Model 004

Application 2: 90 degree glass-to-glass applicationClip it onto the fixed panel with the soft fin at 90 degree to the in-swing glass door. The soft fin helps cushion door closure, reduce noise and it forms a good seal on the swinging door.

Application 3: As a bottom sealWorking with swinging glass door as a bottom seal, it applies to the situation when there is little or no gap between the bottom of the opening door and the floor, as the soft drip is virtually horizontal. This is designed to be positioned on the inside of the shower door so the water will simply run off of it into the shower tray.



#004 Application 2&3 For Swinging Doors At Strike Side

Back to Index

6mm 8mm

10mm 12mm

#004 CAD drawings Rigid

Soft

Back to Index

Model 005This is another Versatile Seal which has 4 uses:

Application 1: Snap it onto door bottom and the angled side fin works as a bottom wipe as well as a drip rail. The fin should be positioned on the inside of the screen so that the water will run off of it in to the shower tray when showering.

Application 2: Snap it onto the swinging door vertically with the angled fin at the strike side 90 degree to the wall or fixed panel. The fin forms a good seal on a flat surface. See more application

in the next page

At hinge side90 degree to the wall #005 Application 1&2


Back to Index

Model 005

Application 3:

This seal is especially designed to work at hinge side on swinging doors at 90 or 135 degrees with the wall or fixed panel. Snap it onto the door with the angled fin on the hinge side. The soft fin forms a good seal on the flat surface.

At hinge sidefor 90 or 135 degree

#005 Application 3

See more application in the next page

Back to Index

Model 005

Application 4: 135-degree glass-to-glass application

Snap onto a fixed panel at 135 degree with the door and the angled fin on the strike side, which will create a seal between the two pieces of glass, cushion door closure and reduce noise.

For swinging doors at strike side 135 degree

#005 Application 4


Back to Index


10mm 12mm

6mm 8mm

Back to Index


#005A Application 1&2 At strike side 135 degrees

Model 005ATranslucent PVC profiles with rigid angled lips and soft stops.Application 1: Snap it onto the bottom edge of the shower screen and the soft lip acts as a bottom wipe. The lip should be positioned inside the bath screen so that the water will run off of it in to the shower tray. The soft stop forms a good seal on a flat surface.

Application 2: Snap it onto a fixed panel at 135 degree with the door and the angled fin on the strike side. the soft stop will create a seal between the two pieces of glass.


Back to Index


10mm 12mm

6mm 8mm

Back to Index

#007 Application 1&2

Model 007Sealing Strips with soft bubble seals Application 1: working as bottom seals for swinging doors or fixed panels.Application 2: Snap it onto a sliding door or swinging door vertically and the soft bubble functions as a watertight barrier on the wall.


for fixed panel as bottom seals

for swinging doors as bottom sweeps

for sliding or

swinging doors

against t

he wall

Back to Index


10mm 12mm

6mm 8mm

Back to Index

#007A Application 1&2

Model 007ARigid H profiles with soft bubble seals. It has the same uses as Model 007, but is suitable for larger gaps to stop leak. Application 1: working as bottom seals for swinging doors or fixed panels.Application 2: Snap it onto a sliding door or swinging door vertically and the soft bubble functions as a watertight barrier on the wall.

for fixed panel or swinging doors as bottom seals

for sliding doors or swinging doorsagainst the wall

Back to Index

#007G Application

Model 007G

The seal incorporates a 8mm soft bubble seal at the bottom, and a hard plastic 45 degree drip rail that should be positioned on the inside of the screen. The drip rail deflects most of the running water before it reaches the bottom seal.


Back to Index

#009 Application

Model 009

Sealing strips with soft bubble seals and deflector fins for glass-to-floor application, working with straight or curved shower screens. The circular bubble seal functions as a watertight barrier on a flat surface while the deflector fin directs water away from the seal for extra leak protection.

for swinging doors as a bottom sweep

See CAD drawing in the next page

Back to Index


10mm 12mm

6mm 8mm

Back to Index

#009A Application

Model 009A

Sealing strips with soft bubble fins and angled deflector fins for glass-to-floor application, working with straight or curved shower screens. The flexible bubble fin seals the gap between the bottom of the screen and the floor while the angled deflector fin redirects the water back into the shower tray.


Back to Index

#009A1 Application

Model 009A1

Sealing strips with soft bubble fins and angled deflector fins for glass-to-floor application, working with straight or curved shower screens. The bottom flexible bubble fin seals the large gap between the screen and the floor while the angled deflector fin redirects the water back into the shower tray or the bath. The extended bottom fin under the bubble can be trimmed to size.


Back to Index

#009B & 009B1 Application

Model 009B & 009B1

Glass to floor bottom seals with double soft bottom fins and 45 degree rigid drip rails assisting in deflecting water back into the shower enclosure or the bath. Model 009B1 is with a longer angled drip rail.



Back to Index

#009B CAD drawingsRigid

Soft

10mm 12mm 8mm

Back to Index

#009C Application

Model 009C

This seal incorporates a 13mm medium soft water deflector fin which will deflect up to 90% of water away from the bottom seal. The deflector fin is designed to fit facing the inside of the bath/shower.



Back to Index

#009C CAD drawings Rigid

Soft

6mm 8mm

Back to Index

#009D1 Application

Model 009D1

Translucent PVC profiles with rigid curved drip rails. This seal is designed to fit the situation where there is little gap between the floor and the bottom of the door. The drip rail directs running water back to the shower tray and should be position inside the shower.


Back to Index

#009W Application

Model 009W

Translucent PVC profiles with rigid angled side fins and single soft bottom fins. The side fin works as a water deflector and the bottom fin forms a good seal on the floor or bath.


Back to Index

H1007 Application

Model H1007

This is a bottom seal with straight and angled soft fins. The straight fin bridges the gap between edge of glass and the bath surface or the floor. The angle fin functions as a drip seal to deflect water back to the bath or shower tray before it reaches the bottom of the glass. It should be positioned on the inside of the enclosure or screen to serve its purpose

As bottom sweeps

Back to Index

#027A Application

Model 027A

Translucent profiles with triple soft fins for extra leak protection. The two side fins work as water deflectors which direct running water back to the shower tray.


for swinging doors as bottom seals

Back to Index

#011A Application

Model 011A

Translucent rigid profile with soft stops.

Snap it onto the fixed panel at 90 degree to the swinging door. The soft stop helps cushion door closure, reduce noise and it forms a good seal on the swinging door while it is closed.

for swinging doors90 degree application


Back to Index


10mm 12mm

6mm 8mm

Back to Index

#011B Application

Model 011B

Working as a pair on sliding shower doors, wether they are for straight, corner opening or curved sliding enclosures, this set of seals push onto the edge of the sliding doors to prevent water running through the gap.

See Model 004 and 014.


for sliding doors

Back to Index

#014 Application

Model 014

Working as a pair on sliding shower doors, wether they are for straight, corner opening or curved sliding enclosures, this set of seals push onto the edge of the sliding doors to prevent water running through the gap.

See Model 004 and 011B.

for sliding doors

Back to Index

#015 Application

Model 015Sealing Strips with small soft bubble seals. The circular bubble seal functions as a watertight barrier on a flat surface. This seal is suitable for very small gaps between the glass and the surface you want to seal.

Application 1: working as bottom seals for swinging doors or fixed panels.

Application 2: Snap it onto a sliding door or swinging door vertically and the soft bubble functions as a watertight barrier on the wall. It may also be used on inline glass-to-glass application.


for sliding doors

as bottom sealsBack to Index

#015 CAD drawings Rigid

10mm 12mm

6mm 8mm

Back to Index

#015B Application

Model 015B

Sealing Strips with soft bubble seals and vertical fins for glass to wall/floor application. The circular bubble seal functions as a watertight barrier on a flat surface. The vertical fin functions as an extra leak protector. This seal is suitable for very small gaps between the glass and the surface you want to seal.

for swinging dooras bottom sweeps

For swinging doors sat strike side

Back to Index

E022 Application

Model E022

This seal strip is designed to clip onto the bottom of a fixed glass pannel. The two legs work as seals and water deflectors so that no sealant is needed. They are rigid and help the pannel stand on the floor without the use of aluminum channels.

For fixed panels

Back to Index

#010 Application

Model 010

This rigid “H” profile in translucent or white colors works as a glass connector for glass curtains or it could be snapped onto a fixed panel and the double fins will form a seal on the sliding door.

for 180 degree glassto glass application

Back to Index

#010A Application

Model 010A

Rigid “H” profiles works as 180-degree glass to glass connectors.

for 180 degree glassto glass application


Back to Index

#010A CAD drawingsRigid

Soft

8mm 10mm

Back to Index

#013 Application

Model 013 Rigid profile with a slot.

Application 1: With a pile weatherstrip slided into the slot, the seal is vertically clipped onto the edge of a swinging glass door, it forms a good seal on the wall or fixed panel.

Application 2: Slide a magnetic strip (Model G7-9N, see the catalogue of magnetic seals ) into the slot and the seal works as a magnetic seal for 180 degree application. It has the same use as 008B(see the catalogue of magnetic seals).

for sliding doors


90 degree applicationfor swinging door

Back to Index

#013 drawings Rigid

Soft

10mm 12mm

Back to Index

#006 Application 1&2 for swing doors at hinge side

Model 006Translucent PVC profiles with soft strap connectors. Application 1: Snap it onto two folding panels or fixed panels in 90 to 180 degree alignment and the middle soft strap works as a connector to seal the gap between the two panels.

Application 2: working at the hinge side of a swinging door at 90 degree to the fixed panel, it functions as a good seal to bridge the gap between the door and the panel.

for folding doors or fixed panels

Back to Index

#013A Application

Model 013A

This is a translucent rigid profile with a slot. With a silicated pile weatherstrip slided into the slot, this seal is designed for 180 degree sliding door application.

for sliding doors

Back to Index

#026 Application

Model 026

Translucent strip designed to connect two fixed panels at 90 degree alignment to replace the use of metal channels.

Glass connectorsfor 90 degree application

Back to Index

#029 Application

Model 029

This is a translucent strip designed to connect two fixed panels at 90 degree to each other to replace the use of aluminum channels.


Glass connectorsfor 90 degree application

Back to Index

#019 Application

Model 019

Translucent profiles designed to protect the edge of glass.


Glass edge protector

Back to Index


10mm 12mm

6mm 8mm

Back to Index

F023 Application

Model F023

Edge protectors for 4mm glass screens.

glass edge protector

Back to Index

L759A Application

Model L759A

This is a rigid edge protector with a soft lip inside the U profile that will push the glass for a firm fit.

Edge protector

Back to Index

E035 Application

Model E035

This seal could be made of rigid or soft materials. It works as a glass edge protector for fixed panels or sliding doors.

for sliding doors or fixed panels

Back to Index

E017 Application

Model E017

This seal is designed to slide into the metal channel of the

screen. It has a 6mm fin to bridge the gap between the

screen and the floor or the wall to prevent water slash out of

the shower tray.

for swinging doors as bottom seals

for swinging doors at strike side

Back to Index

E027 Application

Model E027

This seal is designed to slide into the metal channel of the

screen. It has a soft fin to bridge the gap between the screen

and the floor or the wall to prevent water slash out of the

shower tray.

for sliding doors

Back to Index

E059 Application

Model E059

This seal is designed to slide into the metal channel of the screen. It has a 8mm angled fin to bridge the gap between the screen and the floor or the wall to prevent water slash out of the shower tray.

for swinging doors

As bottom seal

Back to Index

E091 Application

Model E091

This seal is made from a soft PVC material in translucent or white colors, and will slide into a circular metal channel at the bottom of a swinging glass door or folding bath screens and create a seal on a flat surface. Suitable for folding or straight screens. The bottom fin can be cut to suit smaller gaps quite easily with scissors or a sharp blade. It can be used either way up, which ever is the most suitable for your screens.

for folding bath screens

Back to Index

L012 Application

Model L012

It is designed to slide onto a metal T Channel of a swinging door at hinge side. The long fin has a soft part so that it will bend to adjust the angle and the fin forms a seal on a flat surface.

For swinging doors at hinge side

Back to Index

E032 Application

Model E032

This Half-round type bubble Seal is made from translucent soft PVC which is designed to slide into an aluminum channel. The bulb seal creates an excellent water tight barrier between the screen and a flat surface. It is flexible enough to compress when the door closes and return to its normal shape when straightened.

for swinging doors or sliding doors

as a bottom seal

Back to Index

E032D Application

Model E032DThis T-Bubble Seal is made from translucent soft PVC which is designed to slide into an aluminum channel or could be adhered to glass edge with silicone sealant. The bulb seal creates an excellent water tight barrier between the screen and a flat surface. It is flexible enough to compress when the door closes and return to its normal shape when straightened. *For swinging doors at hinge side or strike side*As a bottom seal;*For sliding doors;

for swinging doors or sliding doors

As bottom seals

Back to Index

E073 Application

Model E073

This bubble seal is made from translucent soft PVC which is designed to slide into an aluminum channel. The bulb seal creates an excellent water tight barrier between screen and a flat surface. It is flexible enough to compress when the door closes and return to its normal shape when straightened.

for sliding doors

As a bottom seal

Back to Index

E021 Application

Model E021

This seal is designed to fill the slot of the excessive part of metal channels to prevent water and dust accumulation.

To fill the slot

Back to Index

E025 Application

Model E025

This seal is made of white soft vinyl and is easy to bend or push into a frame slot. It is shaped so it can be pushed into a slot on a metal frame or profile, and the seal flap creates a seal between the frame or metal profile and a closing glass panel or shower door.

for sliding doors

Back to Index

E037A Application

Model E037A

This T seal is made of white soft PVC and designed to inserted into the small gap between:

1) shower tray and the wall2) bathtub and the screen

to prevent water leak.

for shower tray or bath sealing

Back to Index

E037B Application

Model E037B

This T seal is made of white soft PVC and designed to inserted into the small gap between:

1) shower tray and the wall2) bathtub and the screen

to prevent water leak.

for shower tray and bath sealing

Back to Index

E051 Application

Model E051

This gasket is made of white soft PVC. It is designed to clip onto the bottom of a glass screen and it is inserted into the bath to form a good seal.

Back to Index

for bath sealing

U seal Application

U Seals

These translucent soft profiles are designed especially to use on aluminum profiles between the glass and outer channels. They secure the glass in the channel and eliminate the need for messy sealant between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The soft teeth is designed to push between the glass and frame of a shower enclosure to create a water tight seal.

Working with metal channels

Back to Index

#018 Application

Model 018

Rigid seal strips with small soft teeth. It is inserted into aluminum U Channels to secure glass in the channel and eliminate the need for messy silicone between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The soft teeth is designed to push between the glass and frame of a shower enclosure to create a water tight seal.

Worked with aluminum channels

Back to Index

E028 Application

Model E028

This frame strip is made from a soft translucent vinyl. It is inserted into the aluminum U Channels of the shower on the interior to secure glass in the channel and eliminate the need for messy silicone between the glass and metal, dramatically reducing installation time. If the glass is ever scratched or damaged it can be removed without the need to cut out the sealant. The small teeth on the strip are designed to push between the glass and frame of a shower enclosure to create a water tight seal.

for sliding doors

Back to Index

GoldRays is the major manufacturer of shower and bath...

Documents

Transcript of GoldRays is the major manufacturer of shower and bath...