GMAT Time Management

7/29/2019 GMAT Time Management

1/9

GMAT- Everything You Need To Know About

Time Management

Stacey Koprince June 21, 2011

Time management is obviously an essential GMAT skill, and one of the (many!) skills we need for this test

is the ability to maintain an appropriate time position. Time position refers to the relationship between

the test takers position on the test (the question number) and the time that has elapsed to get to that

point in the section. For example, if Ive just finished quant question #5 and 15 minutes have elapsed so

far, am I ahead, behind, or on time?

Check out the table below to help answer that question:

Positive ahead of time (>3 minutes ahead)

Neutral on time (+/- 3 minutes)

Negative behind on time (>3 minutes behind)

In my previous example, I would be behind on time because, on quant, were expected to average about

2 minutes per question. After 5 questions, only 10 minutes should have elapsed so I am 5 minutes

behind, putting me in a negative time position.

Most people will find themselves in the negative position more frequently than the positive position. If

we run out of time before completing the section, were going to incur a huge penalty because either well

answer a bunch of questions incorrectly in a row (random guessing just to finish on time) or well actually

leave questions blank (and that incurs an even higher penalty than the first scenario).

It can also be very problematic to be too far in the positive position, though. If youre answering many or

most questions way too quickly, then youre also likely making a lot of careless mistakes, and that will killyour score by the end of the test.

Ideally, wed like to remain neutral throughout the test, which means that we stay within two to three

minutes of the expected time. Sometimes, though, were going to get off track. So how do we remain

neutral as much aspossible? And when we do get into a positive or negative position, how do we get

back on track? Thats what were going to discuss in this series.
http://www.manhattangmat.com/blog/index.php/author/skoprince/http://www.manhattangmat.com/blog/index.php/author/skoprince/http://www.manhattangmat.com/blog/index.php/author/skoprince/


2/9

(1) Understand how the scoring works

If you dont understand how the scoring works, youre probably going to mess up your timing.

(A) Everyone gets a lot of questions wrong, no matter the scoring level; thats just how the test

works. Pretend youre playing tennis. You dont expect to win every point, right? Thatd be silly. You justwant to win more points than your opponent (the computer)!

(B) Getting an easier question wrong hurts your score more than getting a harder question wrong. In fact,

the easier the question, relative to your overall score at that point, the more damage to your score if you

get the question wrong. (Note: it is still very possible to get the score you want even if you make mistakes

on a fewof the easier questions.)

(C) Missing three or four questions in a row hurts your score more, on a per-question basis, than getting

the same number of questions wrong but having them interspersed with correct answers. In other words,

the effective per-question penalty actually increases as you have more questions wrong in a row. This, of

course, is exactly what happens to someone who maintains a negative time position on the test; even ifyou notice and try to catch up toward the end, youre likely to end up with a string of wrong answers in a

row.

(D) The largest penalty of all is reserved for not finishing the test another possible consequence of

maintaining a negative time position.

(2) Know your per-question time constraints and track your

work

When practicing GMAT-format problems, ALWAYS keep track of the time for each question, whether youare doing one problem at a time or a set of problems at once.(Note: GMAT-format means questions

that are in the same format as one of the official GMAT question types. If you are doing other type of

problems say, math drills you do not necessarily need to time yourself.)

Question Type Average Timing Min and Max

Quant 2 minutes 1 minute; 2.5 minutes

Sentence Correction 1 minute 15

seconds

45 seconds; 2 minutes


3/9

Critical Reasoning 2 minutes 1 minute; 2.5 minutes

Reading Comp: Reading 2 to 3 minutes 1.5 minutes; 3.5 minutes

Reading Comp: General

Questions

1 min 30 seconds; 1 minute 30

seconds

Reading Comp: Specific

Questions

1.5 minutes 45 seconds; 2 minutes

So what does that all mean? If we want to finish the section on time, then we have to hit the average

expected timing. At the same time, averages are only averagesyoure going to have some faster

questions and some slower ones. The Min and Max numbers reflect a different consideration. First, I

want to make sure that Im generally spendingenoughtime on questions that I dont make a bunch of

careless mistakes simply due to speed. On the flip side, if Im spending more than about 30 seconds

above the expected average, the chances are very good that the question is just too hard for me (and, if

thats the case, Ive already spent too much time!).

Keep a time log that reflects the time spent on EVERY problem. (Note: if youre taking our course, use the

OG Archer online program to time yourself and keep track of all of your data.) If you make your own log, it

might look like a rough version of this:

Question Type Source Benchmark Time

Spent

Time

Position

Data Sufficiency OG12 #43 2 min 2 min 10sec

-10

Sentence Correction OG12 #62 1 min 15

sec

1 min +15


4/9

Reading Comprehension:Reading long passage

OG12Passage #3

3 min 3 min 43sec

-43

On the Data Sufficiency question, the test taker had a negative 10 second position; on the SentenceCorrection question, the test taker had a positive 15 second position, and so on. Group the question types

together in the log (so, instead of mixing types as the above chart does, keep one log for Data Sufficiency

questions, a separate log for Sentence Correction questions, and so on). Highlight questions on which

you fell outside of the Min / Max time range.

If you use ManhattanGMATs OG Archer, note that youll have all of the timing data saved for you

automatically, but youll still have to keep track of which questions fall outside of the Min / Max time

range. Click on the Review Your Answers link to view a list of the problems, and record the too fast and

too slow problems in a log of your own.

(3) Reflect On Your Results

The log will make you aware of your pacing on a single-problem level, and will force you to consider the

time as you work through a practice problem. Aggregate the data to determine those question types that

are generally costing you time (a significantly negative time position overall). If youre using OG Archer,

you can see this aggregate data on the Statistics tab (in Table or Graph format).

Next, note whether youre getting these negative position questions right or wrong (across the various

categoriesfor example, Rate problems or Modifier SCs). For those that youre answering correctly, the

primary question to answer is: how can I become more efficient when answering questions of this type?

For those that youre answering incorrectly, the initial question is simply: how can I get this wrong faster?

(Im getting it wrong anyway so if I can get it wrong faster, which shouldnt be that hard to do, then at

least I wont be hurting myself on other questions in the same section.)

How do you get things wrong faster? Well, Im exaggerating a little bit here, but what I really mean is: do

NOT spend extra time on these questions (wrong and slow) no matter what. You may be able to learn

how to make a decent educated guess and you should certainly try! Longer term, you may then decide

to study that particular area / topic more closely in order to try to get better.

Also notice those questions that are buying you time (a significantly positive time position overall). First,

make sure that you are not making many careless mistakes with these; working quickly is never a positive

thing if you sacrifice a question that you were capable of answering correctly. You may actually need

to slow down on some of these in order to minimize your careless mistakes.

If you do find areas that are both highly accurate and very efficient, excellent; these are your strengths

and you should be very aware of those while taking the test. For instance, if you discover that youre in a

negative time position, you should still take your normal amount of time to answer any strength

questions; dont sacrifice the ones you can answer correctly! Instead, make a random guess on the next

weakness question that you see in order to get yourself back to a neutral position.


5/9

(4) Develop your 1 minute sense

While keeping a single-problem time log will help you become aware of your pacing on all question types,

you cant check the clock after every problem on the real test. Youll drive yourself crazy before the test is

over! What to do, then?

What were going to do is develop a time sense so that we can make appropriate, timely decisions as

we move through the test. Lets talk first about why and how we use this time sense; then, well talk about

what we need to do in order to develop it.

WHY are we developing a 1-minute sense?

One of the key timeframes on this test is the 1-minute mark on a question. For quant, CR, and some RC

questions, this represents the halfway point, and there are particular things that we need to have

accomplished by that time in order to have a reasonable shot at finishing the question correctly in 2

minutes. For SC and some RC questions, the 1-minute mark represents the wrapping-up point we

should be close to done with the problem.

For two minute questions (quant, CR, and Except or Roman Numeral RC), we spend the first minute

actively trying to get to the right answer. By the 1 minute mark, we need to be on track. This means that

we need to know what were doing, have a very good idea of what else needs to happen in the second

minute, and have confidence that were capable of doing that work. If werenoton track at the 1 minute

mark, then we need to move from our best strategy (trying to find the right answer) to our second-best

strategy (trying to find wrong answers). We spend up to 1 more minute eliminating wrong answers, then

we guess and move on.

Note: when youre on track, theres no question in your mind. If I were to interrupt you on such a question

and ask whether you were on track, youd tell me, yes, I am, dont interrupt me! If you are thinking, Well, Iknow this part over here Im not totally sure where thats going, but with a little more time, Im sure

No. Stop. You are not on track.

For most other questions (SC and general or main idea RC questions), the 1-minute mark is almost the

times up mark. If youre getting that 1-minute feeling and youre not on track, guess from among the

remaining answers and move on. (Do not spend time trying to figure out how to guess at this point

times already up.)

Finally, for normal specific detail and inference RC questions (not Except or Roman Numeral), our

expected timeframe is about 1.5 minutes. When you get that 1-minute feeling and arent on track, start to

eliminate more aggressively. You have a little time to decide what to eliminate, but you cant spend up toanother minute on these.

HOW do we develop a 1-minute sense?

You need access to a stop watch (physical or electronic) that has lap timing capability. (Most electronic

stopwatches will do this; only some physical stopwatches will.) When using lap timing, pushing the lap

button will not stop the stopwatch; rather, it will mark the time at which you pushed the button, but the


6/9

stopwatch itself will keep running. You can push the lap button multiple times, and the timer will record

all of the times at which you pushed the button while continuing to run.

Set yourself up with a set of 5 or 10 quant or CR practice problems. (Its best to practice this with 2-minute

questions to start.) Start your timer and cover it up so that you cant see what it says (but still give yourself

access to the lap button). Dive into the first problem; when you think its been about a minute since youbegan, push that lap button. When youre done with the problem, push the lap button again. Start your

second problem; when you think its been about a minute since you began, push that lap button. When

youre done, push the button again. Keep repeating this process until youre done with your set. (Note: if

youre done with the question before you think it has been a minute, check your work. If you were really

that fast, you have the time to check, right? Make sure you didnt make a careless mistake simply due to

speed. While checking your work, still push that button when you think it has been a minute since you

started in the first place.)

Now, go back and look at the data. For the 1-minute part, anything between 45 seconds and 1 minute 15

seconds is good. Anything outside of that range is too fast or too slow. Note your tendencies and,

tomorrow, adjust accordingly when you do your next set of problems. Most people find it takes three to

four weeks of regular practice with this in order to develop a time sense that is reasonably accurate most

of the time.

Note: you can also train yourself when youre doing anything that requires extended mental

concentration, even if its not GMAT-related. Have to write up a report or memo for work or do some

research? Set up your timer and push the button every minute until youve pushed it ten times. Then

check your data.

Once your time sense is relatively reliable, you can start to implement your am I on track? and if not,

Im moving on, or Im moving to guessing strategy. This also requires you to know how to make good

educated guesses, of course. Check out these two articles for help:Educated Guessing on

QuantandEducated Guessing on Verbal.

(5) Transition to Benchmarks

You probably noted that our timing is still a bit loose above; we might finish one 2-minute question in

only 1.5 minutes, and another in 2.5 minutes. Thats fine, as long as we are generally spending long

enough (at least 1 minute) to minimize careless mistakes and yet not too long (more than 2.5 minutes) so

that we dont take time away from other questions.

On a full test or test section, its best to monitor time using Benchmarks. There are several ways to do

this; try these out and use the one that works best for you.

Method 1: Checking the clock at certain times to see whether youre on the right question (all question

ranges assume + /1 question; that is, youre okay if youre within 1 question of the expected range):
http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/http://www.manhattangmat.com/blog/index.php/2010/09/09/how-to-make-educated-guesses-on-quant/http://www.manhattangmat.com/blog/index.php/2010/09/09/how-to-make-educated-guesses-on-quant/http://www.manhattangmat.com/blog/index.php/2010/09/09/how-to-make-educated-guesses-on-quant/http://www.manhattangmat.com/blog/index.php/2010/09/09/how-to-make-educated-guesses-on-quant/http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/http://www.manhattangmat.com/blog/index.php/2010/10/19/how-to-make-educated-guesses-on-verbal/


7/9

Time Left MathNear Question VerbalNear Question

75 minutes 1 1

60 minutes 7-8 8-10

45 minutes 14-15 16-18

30 minutes 21-22 24-26

15 minutes 28-29 32-34

Method 2: Checking the question number at certain points to see whether youve used the right amount

of time (all times assume + /2 minutes; that is, youreokay if youre within 2 minutes on either side);

Note: check after finishing the listed question:

Q Number (After Finishing) MathTime Left VerbalTime Left

10 55 minutes 56 minutes




8/9

Method 3 (quant only):Doing a little math to calculate your position. Heres how it works: Glance at the

question number. Multiply that number by 2. Subtract the resulting number from 75. Now look at the

clock. Are you within 2 minutes of that number?

For example, Im on question 11. Multiplying by 2 gives me 22. 75 22 = 53. If the timer says 51 to 55

minutes left, Im okay; if the timer is outside of that range, Im going too quickly or too slowly.

Note that the time block for method 1 is 15 minutes and the time block for method 2 is 20 minutes. As

you progress in your studies, you can begin to set up 15-minute or 20-minute blocks of practice questions

and do mini tests to start practicing the timing in a block. (Use the per-question timing averages to

determine how many questions you should have in a 15-minute or 20-minute block.)

(6) Know how to recover from bad timing

Okay, everything weve talked about so far has focused on what wedo want to do. What do we do if

things get off track? There are two levels to this: what to do immediately during an actual testing / timed

situation, and what to do during your study afterward, before you take another test.

What to do during a test

As soon as you notice a timing problem, you need to start dealing with it. Dont ignore it and assume it will

get better later; most likely, it will only get worse.

First, heres how you know youre going too slowly:

Method 1: you are more than one question lower than the expected range for that timeframe. For

example, you check the clock at 45 minutes to go on quant, and you are on question 12. Youre supposed

to be on question 14 or 15. Youre 2 questions away; you need to take action.

Method 2: you are more than 2 minutes slower than the expected time. For instance, you check the clock

after finishing question 20 on verbal, and you have 33 minutes left. Youre supposed to have around 37

minutes left, so youve lost 4 minutes. Again, you need to take action.

Method 3 (quant only): works like method 2, above.

You are going to need to sacrifice something in order to get back on track; you dont have a choice about

that. You do have a choice about whatyou sacrifice and there are better and worse choices you can

make. Do NOT sacrifice things you know how to do. Dont tell yourself that youll do this question 30

seconds faster because you already know how to do it, so you can just speed up. Youre risking acareless mistake on a question that you know how to get right, plus youre going to have to do that on

several questions to make up the 2 minutes that youre behind, so youre really giving yourself a chance

to miss multiple questions that you know how to do.

Instead, the very next time you see a question that you know is a weakness of yours, skip it. Make an

immediate, random guess and move on. Thereyouve only sacrificed one question, and it was a

weakness anyway. Depending upon the question type and how quickly you moved on, you saved


9/9

anywhere from a little under 1 minute to a little under 2 minutes. If thats enough to catch back up, great.

If not, repeat this behavior until you are caught back up. Dont worry if you see two big weakness

questions in a row. Maybe you got lucky and got that first one right. Maybe one is an experimental. Even

if they both count, getting two wrong in a row wont kill your score you can recover because you still

have more questions to comeand youre not sure that you couldve gotten them right anyway, because

they were weaknesses.

What about going too quickly? We can tell in the same way except the data is the opposite of what it

was above. For method 1, you are more than one question higher than the expected range for that

timeframeso youre on a higher question number than expected. For methods 2 and 3, you are more

than 2 minutes faster than the expected time so you have more time left on the clock than expected.

In this case, you do need to slow down a bit, because you might be making careless mistakes simply due

to speed. Make sure youre writing everything down. Check your work on the questions that you know you

know how to do. (On the ones you absolutely dont know how to do, though, just go ahead and move on

you dont need to spend more time on those.) Use your 1-minute sense! If youre ready to move on before

its been about a minute (and you think you got it right), now would be a great time to check your work.

Okay, the test is over, and you realize that you messed up the timing. Now what? Now you go all the way

back to the beginning of this article and start practicing all of the things we discussed until youre better

able to balance your timing throughout a test section (and note that this can take weeks and even

months, depending upon how severe your timing problems are and whether they are also related to holes

in your content knowledge and skills).

That was a lot of stuff!

Heres a summary of our major tasks:

1. Understand how the scoring works2. Know your per-question time constraints and track your work3. Reflect on your results4. Develop your 1 minute sense5. Transition to Benchmarks6. Know how to recover from bad timing

GMAT Time Management

Documents

Transcript of GMAT Time Management