GLORIA STOP VALVE TX421SG - TOTO Indonesia · "GLORIA" STOP VALVE TX421SG S06804R SPECIFICATIONS 55...
Transcript of GLORIA STOP VALVE TX421SG - TOTO Indonesia · "GLORIA" STOP VALVE TX421SG S06804R SPECIFICATIONS 55...
"GLORIA" STOP VALVE TX421SG
S06804R
SPECIFICATIONS
55
0 -59
2.5
PT½PT½
Ø60
55
0 -59
2.5
PT½PT½
Ø60
TX421SG"GLORIA" Lever Handle Stop Valve
TX421SGNC"GLORIA" Cross Handle Stop Valve
1.
2.
Inlet
Body
Outlet
* Remove the cover after the mortar dried
3.
Cover *
Mortar
INSTALLATION
Handle Set *
* Tighten by hand
Minimum Mortar LevelMaximum Mortar Level
OPERATING CONDITIONS
Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
MAINTENANCE
ATTENTIONUse of abbrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended.
TROUBLESHOOTINGCHECK
PROBLEM POINT SOLUTIONW ater leaks around
the handle1 Tighten
1. CERAMIC HEAD WORK
Water supply pressure : 0.05 ~ 0.75 MPa.Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.2.
R2
* Pipe supplied by owner
"GLORIA" STOP VALVE TX421SG
S06804R
SPECIFICATIONS
55
0 -59
2.5
PT½PT½
Ø60
55
0 -59
2.5
PT½PT½
Ø60
TX421SG"GLORIA" Lever Handle Stop Valve
TX421SGNC"GLORIA" Cross Handle Stop Valve
1.
2.
Inlet
Body
Outlet
* Remove the cover after the mortar dried
3.
Cover *
Mortar
INSTALLATION
Handle Set *
* Tighten by hand
Minimum Mortar LevelMaximum Mortar Level
OPERATING CONDITIONS
Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
MAINTENANCE
ATTENTIONUse of abbrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended.
TROUBLESHOOTINGCHECK
PROBLEM POINT SOLUTIONW ater leaks around
the handle1 Tighten
1. CERAMIC HEAD WORK
Water supply pressure : 0.05 ~ 0.75 MPa.Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.2.
R2
* Pipe supplied by owner