Global standards used locally worldwide - ISO...ST RK ISO 15590-2:2007 (ISO 15590-2:2003, IDT) EN...

Global standards used locally worldwide List of ISO TC67 standards and their status with API, CEN

and various regional and national standards developing organizations

January 2020

1

Table of Contents Publications ........................................................................................................................................... 3

Presentation of the list ........................................................................................................................... 5

Global List of standards…………………………………………………………………………..……...…….8

Disclaimer

Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither ISO, ISO/TC 67 nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms. The document is made available for information purposes only.

2

Publications Global experience

The Oil & Gas Industry has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. This valuable knowledge for the industry is collated and distilled to use as Global standards used locally worldwide. The foremost aim of international standardization is to facilitate the exchange of goods and services through the elimination of technical barriers to trade.

The ISO Technical Committee 67 - "Materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries" – (ISO/TC 67) has the responsibility of establishing standards for most capital equipment used in all streams of the Oil & Gas Industry. The ISO/TC 67 standards also provide common health, safety and environmental requirements. This equipment is the hardware portion used for exploration, production, transportation, and processing of liquid and gaseous hydrocarbons within the petroleum, petrochemical and natural gas industries, and refining of crude oil or natural gas products.

The following political, economic, technical, regulatory, legal and social dynamics describe the business environment of the industry sector, products, materials, disciplines or practices related to the scope of ISO/TC 67, and they may significantly influence how the relevant standards development processes are conducted and the content of the resulting standards:

The petroleum, petrochemical and natural gas industries are major industries in most countries' economies. They are one of the major suppliers of energy for the entire world. The industry is involved in the Gross National Product as production/supply or in usage, or both. Petroleum and natural gas provide fuel for heating, lighting, transportation, and mechanization of most of the world. Petrochemical products provide everything from fabrics, plastic, and tyres, to soft drink/water bottles, lubricants, fertilizers, and medicines. The constancy of supply is integral to the functioning of the world economy, and equipment standardized by ISO/TC67 is necessary to assure that supply.

Consistent high-quality standards

With the international standards developed by ISO/TC 67, the need for regional, national or company specifications is reduced, manufacturing and inventory costs are minimized, and regulatory authorities are able to incorporate these standards by reference rather than by restating requirements in regulations. International Standards are the backbone of our society, ensuring the safety and quality of products and services, facilitating international trade and improving the environment in which we live in. Conformity to International Standards helps reassure consumers that products, systems and organizations are safe, reliable and good for the environment. ISO standards can also remove barriers to world trade by providing the technical basis on which political trade agreements can be put into

3

practice, whether they are at the regional or international level. The adoption of standards is entirely voluntary, but companies estimate savings in the millions (U.S. dollars) through having a common set of agreed standards. Numerous studies have shown that standards boost business and economies.

The oil and gas industry recognises the need to develop consistent standards. Oil and gas operators, product and service supply organizations in the industry and other interested parties are encouraged to use the standards as a starting point for their operations or to supplement their own policies and regulations which can apply locally.

More about the benefits of International Standards can be found on the ISO website.

4

https://www.iso.org/benefits-of-standards.html

Presentation of the list

The vision of the petroleum, petrochemical and natural gas industries standards effort in ISO/TC 67 is global standards used locally worldwide. The purpose of this report is to show where we are in this vision, i.e. which countries have adopted the ISO/TC 67 standards. This report will be periodically updated to show the progress of the standards development and adoption process. The current version of the report uses the standards as published on July 2019.1

For up to date information, please consult the public websites of each of the standards development organisations mentioned herein. The list will be available via the official ISO/TC 67 website, and the ISO/TC 67 website under TC 67 management. This report focuses on the ISO/TC 67 standards only. There are many other standards available for use by the Oil & Gas industry, developed by ISO or other standards developing organizations like API, CEN, GOST and GSO. References are made to the public websites of these organisations.

ISO title and ISO column

The basis of this report is the complete list of published ISO/TC 67 standards, including joint working groups. These standards are developed together with:

ISO/TC 60/SC2 “Gear capacity calculation”,

ISO/TC 115/SC3 “Installation and special application of pumps”,

ISO/TC 118/SC 1 “Process compressors”,

ISO/TC 153 “Valves",

ISO/TC 192 “Gas turbines”.

The list also shows the current edition and whether there are technical and/or amendments issued with the International Standard.

ISO and API

In certain situations, the ISO international standard can be published as a supplement to an API standard (via normative reference) which includes technical content

1 The input for the list has been received at various moments in 2019. Please see the top row of the list for date specification by standardization organization.

5

https://www.iso.org/committee/49506.html

https://committee.iso.org/home/tc67

ABNT – Brazil column

This column shows which standards are adopted and published by ABNT as NBR, national Brazilian standard.

API – USA column

This column shows the API standards which have already been re-adopted from the ISO standards. Some state "MOD"; this indicates that there have been some technical changes from the ISO document, whilst those marked “IDT” are identical adoptions. Also note that all national adoptions are, by definition, American National Standards (ANSI). Some of the indicated documents in the API column are issued by another standards developing organization (e.g. NACE).

CSA - Canada column

This column shows which standards are adopted and published by CSA as national Canadian standard. If CSA has not adopted the remaining ISO standards in the list into Canada’s national standards system, that does not necessarily mean that they are not in use.

CEN – Europe column

It is important to note that the EN standards are also published as national standards in all the 33 European member states of CEN, preferably within six months of the publication as EN.

The standards listed are technically identical to the corresponding ISO ones (these standards are numbered EN ISO XXXXX); they were accepted in Europe either through the parallel vote procedure or by Unique Acceptance Procedure within the Vienna Agreement between CEN and ISO (ISO lead). All documents are part of the work programme of CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries”, except some which belong to CEN/TC 69 “Industrial valves”, CEN/TC 282 “Installation and equipment for LNG” or ECISS/TC 110 “Steel tubes, and iron and steel fittings. Some of them (developed by ISO/TC 67/SC2) have a different number in CEN because, if the technical content is identical, their scope in Europe excludes the gas infrastructure industries; they nevertheless have in their title the reference to the ISO initial standards with the indication: (modified).

Note that in the EN document the main body of the standard is identical to the ISO one, with a cover page added to the ISO standard.

GB – China column:

The Chinese number of the ISO adopted standard is different from the ISO one. China adopts ISO standards in different ways: Identical (IDT), Modified (MOD) and a small number as Not equivalent (NEQ).

GOST R – Russian Federation column:

This column shows which standards are adopted and published by GOST R as Russian standards.

6

ST RK – Kazakhstan column:

Kazakhstan adopts the ISO standards in three different ways: Identical (IDT), Modified (MOD) and a small number as Not equivalent (NEQ).

GSO – Gulf States column

This column concerns an additional regional group of countries that are adopting (identical or mod-ified) ISO/TC67 standards. GSO is the Gulf Standardization Organization for the Cooperation Council for the Arab States of the Gulf. GSO currently includes six countries: Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates.

Once a standard is adopted by GSO, it is automatically adopted by the member countries of the Gulf Standards Organization, similar to the CEN process.

7

ISO/TC 67 overview

8

ISO Edition Amd Cor Revision ofwork in progress

Document title TC SC WG Liason TC 67ABNT ‐ Brazil(update in Q2 2019)

ST RK ‐ Kazakhstan(updated in Q2 2019)

API ‐ USA(updated in Q3 2019)

CEN ‐ Europe(updated in Q1 2019)

CSA ‐ Canada(updated in Q3 2019)

GB/T ‐ China(updated in Q1 2019)

GOST R ‐ Russia(updated in Q3 2019)

GSO ‐ Gulf(updated in Q3 2019)

ISO 15590-1:2018 ed. 3 ISO 15590-1:2001; ISO 15590-1:2009 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 1: Induction bends TC 67 SC 2 WG 10 ST RK ISO 15590-1:2011

(ISO 15590-1:2009, IDT)EN 14870-1:2011 [ISO 15590-1:2009 modified] GSO ISO 15590-1:2010

ISO 15590-2:2003 ed. 1 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 2: Fittings TC 67 SC 2 WG 10 ST RK ISO 15590-2:2007

(ISO 15590-2:2003, IDT)EN 14870-2:2004 [ISO 15590-2:2003 modified] GSO ISO 15590-2:2008

ISO 15590-3:2004 ed. 1 Petroleum and natural gas industries -- Induction bends, fittings and TC 67 SC 2 WG 10 ST RK ISO 15590-3:2007 (ISO 15590-3:2004, IDT)

EN 14870-3:2004 [ISO 15590-3:2004 modified)

GB/T 21448-2017 (ISO 15589-1:2015, NEQ) GSO ISO 15590-3:2008

ISO 15589-1:2015 ed. 2 ISO 15589-1:2003

flanges for pipeline transportation systems -- Part 3: FlangesPetroleum and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 1: On-land pipelines TC 67 SC 2 WG 11 ABNT NBR ISO 15589-1 : 2016 ST RK ISO 15589-1:2010

(ISO 15589-1:2003, IDT) [scope of CEN/TC 219] GB/T 20659-2017 (ISO 15546:2011, MOD ) GSO ISO 15589-1:2008

ISO 15589-2:2012 ed. 2 ISO 15589-2:2004Petroleum, petrochemical and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 2: Offshore pipelines

TC 67 SC 2 WG 11 ABNT NBR ISO 15589-2 : 2015 ST RK ISO 15589-2:2007 (ISO 15589-2:2004, IDT)

NACE SP0115-2015/ISO 15589-2:2012

EN ISO 15589-2:2014 [under CEN/TC 219] GSO ISO 15589-2:2008

ISO 16708:2006 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Reliability-based limit state methods TC 67 SC 2 WG 12 ST RK ISO 16708:2008

(ISO 16708:2006, IDT) EN ISO 16708:2006 GSO ISO 16708:2008

ISO 13623:2017 ed. 3 ISO 13623:2000; ISO 13623:2009 Petroleum and natural gas industries -- Pipeline transportation systems TC 67 SC 2 WG 13

ST RK ISO 13623:2010 (ISO 13623:2009, IDT); ST RK 1916-2009

EN 14161:2011 + A1:2015 [ISO 13623:2009 modified] GSO ISO 13623:2010

ISO 21809-1:2018 ed. 2 ISO 21809-1:2011Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)

TC 67 SC 2 WG 14 EN ISO 21809-1:2011 [under ECISS/TC 110] GSO ISO 21809-1:2012

ISO 21809-2:2014 ed. 2 ISO 21809-2:2007Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings

TC 67 SC 2 WG 14ST RK ISO 21809-2:2010 (ISO 21809-2:2007, IDT)GOST R ISO 21809-2-2013

(National Adoption under committee consideration)

EN ISO 21809-2:2014 [under ECISS/TC 110]

GOST R ISO 21809-2-2015 (ISO 21809-2:2007, IDT), TC 357 GSO ISO 21809-2:2008

ISO 21809-3:2016 ed. 2 Amd 1:2011 ISO 21809-3:2008

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 3: Field joint coatings

TC 67 SC 2 WG 14 ST RK ISO 21809-3:2010 (ISO 21809-3:2008, IDT) [scope of ECISS/TC 110] GSO ISO 21809-3:2010

ISO 21809-4:2009 ed. 1Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 4: Polyethylene coatings (2-layer PE)

TC 67 SC 2 WG 14 ST RK ISO 21809-4:2010 (ISO 21809-4:2009, IDT) [scope of ECISS/TC 110] GSO ISO 21809-4:2011

ISO 21809-5:2017 ed. 2 ISO 21809-5:2010Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 5: External concrete coatings

TC 67 SC 2 WG 14 ST RK ISO 21809-5:2012 (ISO 21809-5:2010, IDT)

EN ISO 21809-5:2010 [under ECISS/TC 110)] GSO ISO 21809-5:2010

ISO 21329:2004 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors TC 67 SC 2 WG 15 ST RK ISO 21329:2007

(ISO 21329:2004, IDT) EN ISO 21329:2004 GSO ISO 21329:2008

ISO 3183:2012 ed. 3 Amd 1: 2017 ISO 3183:1980; ISO 3183:2007 rev Petroleum and natural gas industries -- Steel pipe for pipeline

transportation systems TC 67 SC 2 WG 16ST RK ISO 3183:2011 (ISO 3183:2007, IDT); GOST ISO 3183-2015

API 5L, 46th ed:2018 EN ISO 3183:2012 [under ECISS/TC 110]

GB/T 37262-2018 (ISO 27627:2014, IDT)

Adopted previous ISO 3183 revision in 3 parts -1, -2, -3, IDT GSO ISO 3183:2014

ISO/TS 12747:2011 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension TC 67 SC 2 WG 17 ST RK ISO/ТS 12747-2012

(ISO/TS 12747:2011, IDT) CEN ISO/TS 12747:2013 GB/T 30217.2-2016 (ISO/TR 13624-2:2009, IDT ) GSO ISO 12747:2012

ISO 12490:2011 ed. 1 Petroleum and natural gas industries -- Mechanical integrity and sizing of actuators and mounting kits for pipeline valves TC 67 SC 2 WG 18 GOST ISO 12490-2016 API Std 6DX 1st

ed:2012prEN ISO 12490 [status: abandoned]

GB/T 33294-2016 (ISO 10426-3:2003, MOD) GSO ISO 12490:2014

ISO 12736:2014 ed. 1 rev Petroleum and natural gas industries -- Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures TC 67 SC 2 WG 19 API RP 17U 1st

ed:2015 EN ISO 12736:2014 GB/T 5005-2010 (ISO 13500:2008, MOD) GSO ISO 12736:2015

ISO 14313:2007 ed. 2 Cor 1: 2009 ISO 14313:1999 Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves TC 67 SC 2 WG 2 ST RK ISO 14313:2012

(ISO 14313:2007, IDT)API Spec 6D, 24th ed.:2014 (MOD)

EN 13942:2009 + AC:2009 [ISO 14313:2007 modified]

GB/T 24257-2009 (ISO 13879:1999, MOD)

GOST R 55020-2012 (ISO 14313:2007, NEQ), TC 259 GSO ISO 14313:2008

ISO 16440:2016 ed. 1Petroleum and natural gas industries -- Pipeline transportation systems -- Design, construction and maintenance of steel cased pipelines

TC 67 SC 2 WG 20 GB/T 19829.2-2005 (ISO 15663-2:2001, IDT )

ISO 13847:2013 ed. 2 ISO 13847:2000 Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines TC 67 SC 2 WG 8 ST RK ISO 13847:2012

(ISO 13847:2000, IDT)API Std 1104 21st ed:2013

[latest edition not adopted | EN 14163:2001 + AC:2006 (ISO 13847:2000 modified)]

GSO ISO 13847:2008

ISO 14723:2009 ed. 2 Cor 1:2009 ISO 14723:2001 Petroleum and natural gas industries -- Pipeline transportation systems -- Subsea pipeline valves TC 67 SC 2 WG 9 ST RK ISO 14723:2006

(ISO 14723:2001, IDT)

API Spec 6DSS 3rd ed:2017 EN ISO 14723:2009 GB/T 29165.2-2012 (ISO 14692-

2:2002, IDT) GSO ISO 14723:2010

ISO 10414-1:2008 ed. 2 ISO 10414-1:2001 Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 1: Water-based fluids TC 67 SC 3 WG 1 GOST 33213-2014 (ISO

10414-1:2008)

API RP 13B-1 5th ed:2019 (MOD) EN ISO 10414-1:2008 GB/T 16783.1-2014 (ISO 10414-

1:2008, IDT) GSO ISO 10414-1:2009

ISO 10414-2:2011 ed. 2 Amd 1:2012 Cor 1:2013 ISO 10414-2:2002 Petroleum and natural gas industries -- Field testing of drilling fluids --

Part 2: Oil-based fluids TC 67 SC 3 WG 1 GOST 33697-2015 (ISO 10414-2:2011)

API RP 13B– 2 5th ed. 2014 (MOD) EN ISO 10414-2:2011 GB/T 16783.2-2012 (ISO 10414-

2:2002, MOD) GSO ISO 10414-2:2012

ISO 10416:2008 ed. 2 ISO 10416:2002 Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing TC 67 SC 3 WG 1

ST RK ISO 10416-2012 (ISO 10416:2008 IDT)GOST 33696-2015 (ISO 10416:2008)

API RP 13I 8th ed. /ISO 10416:2009 (IDT)

EN ISO 10416:2009 GB/T 29170-2012 (ISO 10416:2008, MOD) GSO ISO 1O416 : 2009

ISO 13500:2008 ed. 3 Amd 1:2010 Cor 1:2009 ISO 13500:1998; ISO 13500:2006 Petroleum and natural gas industries -- Drilling fluid materials --

Specifications and tests TC 67 SC 3 WG 1 In planning ISO 13500 : 2008 ST RK ISO 13500:2012 (ISO 13500:2008, IDT);

API Spec 13A 18th edition

EN ISO 13500:2008 (2nd edition) (COR 1:2009) ISO 13500:2008 MOD

GSO ISO 13500:2008 (to be updated to include Cor1)

ISO 13500:2008 ed. 3 Amd 1:2010 Cor 1:2009 ISO 13500:1998; ISO 13500:2006 Petroleum and natural gas industries -- Drilling fluid materials --

Specifications and tests TC 67 SC 3 WG 1 In planning ISO 13500 : 2008 ST RK ISO 13500:2012 (ISO 13500:2008, IDT);

API Spec 13A 18th edition

EN ISO 13500:2008 (2nd edition) (COR 1:2009) ISO 13500:2008 MOD

GSO ISO 13500:2008 (to be updated to include Cor1)

ISO 13501:2011 ed. 2 ISO 13501:2005 Petroleum and natural gas industries -- Drilling fluids -- Processing equipment evaluation TC 67 SC 3 WG 1 ST RK ISO 13501:2011 API RP 13C 5th

edition:2014 (MOD) EN ISO 13501:2011 GSO ISO 13501:2015

ISO 10426-1:2009 ed. 3 Cor 1:2010; Cor 2:2012 ISO 10426-1:2000; ISO 10426-1:2005 Petroleum and natural gas industries -- Cements and materials for

well cementing -- Part 1: Specification TC 67 SC 3 WG 2 ST RK ISO 10426-1:2011 (ISO 10426-1:2009, IDT)

API Spec 10A 25th ed:2019 EN ISO 10426-1:2009 GSO ISO 10426-1:2012

ISO 10426-2:2003 ed. 1 Amd 1:2005 Cor 1:2006 Petroleum and natural gas industries -- Cements and materials for

well cementing -- Part 2: Testing of well cements TC 67 SC 3 WG 2 ST RK ISO 10426-2:2012 (ISO 10426-2:2003, IDT)

API RP 10B-2nd ed.:2013 (MOD)

EN ISO 10426-2:2003 + AC:2007

GB/T 19139-2012 (ISO 10426-2:2003, MOD ) GSO ISO 10426-2:2013

ISO 10426-3:2003 ed.1 revPetroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

TC 67 SC 3 WG 2 ST RK ISO 10426-3-2011 (ISO 10426-3:2003 IDT)

API RP 10B-3 2nd ed:2016

GB/T 33294-2016 (ISO 10426-3:2003, MOD) GSO ISO 10426-3:2013

ISO 10426-3:2003Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

TC 67 SC 3 WG 2 In planning ISO 10426-3 : 2003 API RP 10B-3 1st ed. / ISO 10426-3:2003 (IDT) EN ISO 10426-3:2004

ISO 10426-4:2004 ed. 1 revPetroleum and natural gas industries -- Cements and materials for well cementing -- Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure


API RP 10B-4 2nd ed. :2015 (MOD) EN ISO 10426-4:2004 GB/T 33294-2016 (ISO 10426-

3:2003, MOD) GSO ISO 10426-4:2013

ISO 10426-6:2008 ed. 1 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 6: Methods for determining the static gel strength of cement formulations


API RP 10B-6 1st ed. Pending Publication ISO 10426-6:2008 (MOD)

EN ISO 10426-6:2008 GB/T 33293-2016 (ISO 10426-5:2004, MOD) GSO ISO 10426-6:2015

ISO 10427-1:2001 ed. 1 Petroleum and natural gas industries -- Equipment for well cementing -- Part 1: Casing bow-spring centralizers TC 67 SC 3 WG 2 ST RK ISO 10427-1:2004

(ISO 10427-1:2001, IDT)API Spec 10D 6th ed. ISO 10427-1:2001 (IDT) EN ISO 10427-1:2001 GSO ISO 10427-1:2009

ISO 10427-2:2004 ed. 1 Petroleum and natural gas industries -- Equipment for well cementing -- Part 2: Centralizer placement and stop-collar testing TC 67 SC 3 WG 2 ST RK ISO 10427-2:2011

(ISO 10427-2:2004, IDT)API RP 10D-2 1st ed. / ISO 10427-2:2004 (IDT) EN ISO 10427-2:2004 GB/T 19831.1-2005 (ISO 10427-

1:2001, IDT ) GSO ISO 10427-2:2009

ISO 10427-3:2003 ed. 1 ISO 18165:2001 Petroleum and natural gas industries -- Equipment for well cementing -- Part 3: Performance testing of cementing float equipment TC 67 SC 3 WG 2 ST RK ISO 10427-3:2004

(ISO 10427-3:2003, IDT) API RP 10F 4th ed:2018 EN ISO 10427-3:2004 GB/T 19831.2-2008 (ISO 10427-2:2004, IDT) GSO ISO 10427-3:2009

ISO 10426-3:2003Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

TC 67 SC 3 WG 2 In planning ISO 10426-3 : 2003 ST RK ISO 10426-3:2011 (ISO 10426-3:2003, IDT)

API RP 10B-3 1st ed. / ISO 10426-3:2003 (IDT) EN ISO 10426-3:2004

ISO 10426-5:2004 ed. 1 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure


API RP 10B-5 1st ed. / ISO 10426-5:2004 (IDT) EN ISO 10426-5:2005 GSO ISO 10426-5:2013

ISO 13503-1:2011 ed. 2 ISO 13503-1:2003Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids

TC 67 SC 3 WG 3 ST RK ISO 13503-1:2009 ISO (13503-1-2003 IDT)

API RP 13M 1st edition /ISO 13503-1:2003 (IDT)

EN ISO 13503-1:2011 GSO ISO 13503-1:2014

ISO 13503-2:2006 ed. 1 Amd 1:2009

Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations

TC 67 SC 3 WG 3 ABNT NBR ISO 13503-2 : 2011 ST RK ISO 13503-2:2009 (ISO 13503-2:2006 IDT)

API RP 19C 2nd ed:2018

EN ISO 13503-2:2006 + A1:2009

GSO ISO 13503-2:2008 (to include Amend 1)

ISO 13503-3:2005 ed. 1 Cor 1: 2006 Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines TC 67 SC 3 WG 3 ST RK ISO 13503-3:2009

(ISO 13503-3 IDT)API RP 13J 5th edition:2014 (MOD)

EN ISO 13503-3:2005 + AC:2007 GSO ISO 13503-3:2014

9










ISO 13503-4:2006 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions


API RP 13M-4 1st ed./ ISO 13503-4:2006 (IDT) EN ISO 13503-4:2006 GB/T 33581-2017 (ISO 13501:2011,

NEQ) GSO ISO 13503-4:2008

ISO 13503-5:2006 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants


API RP 19D 1st edition /ISO 13503-5:2006 (IDT)

EN ISO 13503-5:2006 GSO ISO 13503-5:2008

ISO 13503-6:2014 ed. 1 Petroleum and natural gas industries -- Completion fluids and

TC 67 SC 3 WG 3 ST RK ISO 13503-6-2017 EN ISO 13503-6:2014 SY/T 5108-2014 (ISO 13503-2:2006, MOD)

ISO 10407:1993 ed. 1

materials -- Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions

Petroleum and natural gas industries -- Drilling and production equipment -- Drill stem design and operating limits TC 67 SC 4 WG 1 ST RK ISO 10407:2004

(ISO 10407:1993 IDT)

API RP 7G : 16th ed1998 (MOD) +erratum2000 + add. 2003 +add.2009

[not adopted] GB/T 29169-2012 (ISO 10407-

2:2008, MOD) GSO ISO 10407:2010

ISO 10407-2:2008 ed. 1 Cor 1:2009 ISO 10407:1993 Petroleum and natural gas industries -- Rotary drilling equipment -- Part 2: Inspection and classification of used drill stem elements TC 67 SC 4 WG 1

ST RK ISO 10407-2-2012 (ISO 10407-2:2008 IDT) GOST 33006.2-2014 (ISO 10407-2:2008 MOD)

API RP 7G-2 1st ed. (IDT) + errata 2009

EN ISO 10407-2:2008 + AC:2009

GB/T 29169-2012 (ISO 10407-2:2008, MOD)

GOST 33006.2-2014 (ISO 10407-2:2008, MOD),TC 023 GSO ISO 10407-2 : 2010

ISO 10424-1:2004 ed. 1 Petroleum and natural gas industries -- Rotary drilling equipment -- Part 1: Rotary drill stem elements TC 67 SC 4 WG 1 ST RK ISO 10424-1: 2006

(ISO 10424-1: 2004 IDT)

API Spec 7-1 1st ed. / ISO 10424-1:2004(MOD) +addenda 2007, 2009, 2011, 2019

EN ISO 10424-1:2004 GB/T 22512.1-2012 (ISO 10424-1:2004, MOD ) GSO ISO 10424-1:2009

ISO 10424-2:2007 ed. 1Petroleum and natural gas industries -- Rotary drilling equipment -- Part 2: Threading and gauging of rotary shouldered thread connections

TC 67 SC 4 WG 1

ST RK ISO 10424-2-2015 (ISO 10424-2:2007 IDT)ГОСТ 34438.2-2018 (ISO 10424-2:2007 MOD)GOST R 56349-2015 (ISO 10424-2:2007 MOD)

API Spec 7-2 2nd ed:2017 EN ISO 10424-2:2007 GB/T 22512.2-2008 (ISO 10424-

2:2007, MOD)GOST R 56349-2014(ISO 10424-2:2007, MOD), TC 357 GSO ISO 10424-2:2009

ISO 13534:2000 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment

TC 67 SC 4 WG 1ST RK ISO 13534:2004 (ISO 13534:2000, IDT)GOST R ISO 13534-2013

API RP 8B 8th edition: 2014 (MOD) EN ISO 13534:2000 SY/T 5107-2016 (ISO 13503-

4:2006, MOD)GOST R ISO 13534-2013 (ISO 13534:2000, IDT),TC23 GSO ISO 13534:2015

ISO 13535:2000 ed. 1 rev Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment TC 67 SC 4 WG 1

ST RK 1263-2004 (ISO 13535:2000, NEQ); ST RK ISO 13535:2010 (ISO 13535:2000, IDT)GOST 31844-2012 (ISO 13535:2000)

API Spec 8C 5th edition:2012 (MOD) EN ISO 13535:2000 GOST R 53683-2009 (ISO

13535:2000, MOD), TC 23 GSO ISO 13535:2015

ISO 13626:2003 ed. 1 Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures TC 67 SC 4 WG 1

ST RK ISO 13626:2006 (ISO 13626:2003, IDT)GOST R ISO 13626-2013

API Spec 4F 4th ed:2013 EN ISO 13626:2004 GOST R ISO 13626 - 2013 (ISO

13626:2003, IDT),TC23 GSO ISO 13626:2015

ISO 14693:2003 ed. 1 Petroleum and natural gas industries -- Drilling and well-servicing equipment TC 67 SC 4 WG 1

ST RK ISO 14693:2006 (ISO 14693:2003, IDT)GOST 31841-2012 (ISO 14693:2003)

API Spec 7K 6th ed. :2015 EN ISO 14693:2003 GB/T 29165.1-2012 (ISO 14692-

1:2002, IDT)GOST 31841-2012 (ISO 14693:2003, IDT), TC 023

ISO 13354:2014 ed. 1 Petroleum and natural gas industries -- Drilling and production equipment -- Shallow gas diverter equipment TC 67 SC 4 WG 2 ST RK ISO 13354:2017 API Std 64 3rd ed:2017 EN ISO 13354:2014

ISO 13533:2001 ed. 1 Cor 1:2005 Petroleum and natural gas industries -- Drilling and production equipment -- Drill-through equipment TC 67 SC 4 WG 2


API Spec16A 4thed:2017

EN ISO 13533:2001 + AC:2006

GOST R ISO 13533-2013 (ISO 13533:2001, IDT), TC23 GSO ISO 13533 : 2010

ISO 13624-1:2009 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Design and operation of marine drilling riser equipment


API RP 16Q 2nd ed:2017 EN ISO 13624-1:2009 GB/T 20174-2006 (ISO 13533:2001,

MOD) GSO ISO 13624-1:2015

ISO 13625:2002 ed. 1 Petroleum and natural gas industries -- Drilling and production equipment -- Marine drilling riser couplings TC 67 SC 4 WG 2


Withdrawn EN ISO 13625:2002 GOST R 33005-2014 (ISO 13625:2002, MOD), TC 023 GSO ISO 13625:2015

ISO/TR 13624-2:2009 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report

TC 67 SC 4 WG 2 CEN ISO/TR 13624-2:2013 GSO ISO/TR 13624-2:2016

ISO 10423:2009 ed. 4 ISO 10423:1994; ISO 10423:2001; ISO 10423:2003

Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment TC 67 SC 4 WG 3

ST RK ISO 10423:2004 (ISO 10423:2003, IDT); GOST R 51365-2009 (ISO 10423:2003, MOD)

API Spec 6A 21st ed:2018 EN ISO 10423:2009 GB/T 22513-2013 (ISO 10423:2009,

MOD)GOST R 51365-2009 (ISO 10423:2003, MOD), TC 023 GSO ISO 10423:2010

ISO 10417:2004 ed. 2 ISO 10417:1993 Petroleum and natural gas industries -- Subsurface safety valve systems -- Design, installation, operation and redress TC 67 SC 4 WG 4

ST RK ISO 10417:2007 (ISO 10417:2004, IDT)GOST ISO 10417-2014 (ISO 10417:2004, IDT)

API RP 14B 6th ed.:2015 EN ISO 10417:2004 GB/T 22342-2008 (ISO

10417:2004, IDT)GOST ISO 10417-2014 (ISO 10417;2004, IDT), TC 023 GSO ISO 10417:2009

ISO 10428:1993 ed. 1 Petroleum and natural gas industries -- Sucker rods (pony rods, polished rods, couplings and sub-couplings) -- Specification TC 67 SC 4 WG 4

ST RK 1259:2004 (ISO 10428:1993, NEQ); ST RK ISO 10428:2011 (ISO 10428:1993, IDT); GOST 13877-96 (ISO 10428:1993, IDT)

No more adopted API RP 11B 27th ed:2010

prEN ISO 10428 [status: abandoned]

GB/T 20971-2007 (ISO 10427-3:2003, IDT ) GSO ISO 10428:2015

ISO 10431:1993 ed. 1 Petroleum and natural gas industries -- Pumping units -- Specification TC 67 SC 4 WG 4 ST RK 1260:2004. (ISO 10431:1993, NEQ)

API RP 11E 19th ed:2013

prEN ISO 10431 [status: abandoned] GSO ISO 10431:2011

ISO 10432:2004 ed. 3 ISO 10432:1993; ISO 10432:1999 Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment TC 67 SC 4 WG 4

ST RK ISO 10432:2011 (ISO 10432:2004, IDT)GOST ISO 10432-2014

API Spec 14A 12th ed. :2015 (MOD)

EN ISO 10432:2004 GOST ISO 10432-2014 (ISO 10432:2004, IDT), TC 023

ISO 14310:2008 ed. 2 ISO 14310:2001 Petroleum and natural gas industries -- Downhole equipment -- Packers and bridge plugs TC 67 SC 4 WG 4 GOST ISO 14310-2014 API Spec 11D1 3rd

ed.:2015 (IDT) EN ISO 14310:2008 GOST ISO 14310-2014 (ISO 14310:2008, IDT), TC 023 GSO ISO 14310 : 2009

ISO 14998:2013 ed. 1 Petroleum and natural gas industries -- Downhole equipment -- Completion accessories TC 67 SC 4 WG 4 ST RK ISO 14998-2017

Spec 19AC 1st ed:2016 (MOD) / ISO 14998:2013

EN ISO 14998:2013 GB/T 29165.3-2015 (ISO 14692-3:2002, IDT) GSO ISO 14998:2015

ISO 15136-1:2009 ed. 2 ISO 15136-1:2001 Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps TC 67 SC 4 WG 4

ST RK ISO 15136-1:2012 (ISO 15136-1:2009, IDT)GOST R 55849-2013 (ИСО 15136-1:2009)

Withdrawn EN ISO 15136-1:2009 GB/T 29165.4-2015 (ISO 14692-4:2002, IDT) GSO ISO 15136-1:2015

ISO 15136-2:2006 ed. 1 Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems TC 67 SC 4 WG 4 ST RK ISO 15136-2:2010

(ISO 15136-2:2006, IDT)API Std 11D3 1st ed./ISO 15136-2:2006 (IDT)

EN ISO 15136-2:2006 GB/T 17744-2015 (ISO 14693:2003, MOD) GSO ISO 15136-2:2015

ISO 15551-1:2015 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Electric submersible pump systems for artificial lift

TC 67 SC 4 WG 4 ST RK ISO 15551-1-2017 EN ISO 15551-1:2015 GSO ISO 15551-1:2016

ISO 16070:2005 ed. 2 ISO 16070:2001 Petroleum and natural gas industries -- Downhole equipment -- Lock mandrels and landing nipples TC 67 SC 4 WG 4

ST RK ISO 16070:2011 (ISO 16070:2005, IDT)GOST ISO 16070-2015

API Spec 14L 2nd ed. / ISO 16070:2005 (IDT) EN ISO 16070:2005 GB/T 19829.1-2005 (ISO 15663-

1:2000, IDT ) GOST ISO 16070-2015(IDT) GSO ISO 16070:2014

ISO 16530-1:2017 ed. 1 Petroleum and natural gas industries -- Well integrity -- Part 1: Life cycle governance TC 67 SC 4 WG 4

CEN ISO/TS 16530-2:2015 [status: to be published soon]

GB/T 19829.3-2006 (ISO 15663-3:2001, IDT)

ISO 17078-1:2004 ed. 1 Amd 1:2010

Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Side-pocket mandrels TC 67 SC 4 WG 4

ST RK ISO 17078-2:2010 (ISO 17078-2:2007, IDT)GOST ISO 17078-1-2014

API Spec 19G1 1st edition (MOD)

EN ISO 17078-1:2004 + A1:2010

GOST ISO 17078-1-2014 (ISO 17078-1:2004, IDT), TC023 GSO ISO 17078-1:2010

ISO 17078-2:2007 ed. 1 Amd 1: 2007 Cor 1:2009 Petroleum and natural gas industries -- Drilling and production

equipment -- Part 2: Flow-control devices for side-pocket mandrels TC 67 SC 4 WG 4 GOST ISO 17078-2-2014API Spec 19G2 1st edition (MOD)

EN ISO 17078-2:2007 + AC:2009

GOST ISO 17078-2-2014 (ISO 17078-2:2007, IDT), TC023 GSO ISO 17078-2:2010

ISO 17078-3:2009 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels


API Spec 19G3 1st edition (IDT) EN ISO 17078-3:2009 GOST ISO 17078-3-2013 (ISO 17078-

3:2009, IDT), TC023 GSO ISO 17078-3:2010

ISO 17078-4:2010 ed. 1Petroleum and natural gas industries -- Drilling and production equipment -- Part 4: Practices for side-pocket mandrels and related equipment

TC 67 SC 4 WG 4ST RK ISO 17078-4:2012 (ISO 17078-4:2010, IDT)GOST ISO 17078-4-2015

API Spec 19G4 1st edition (IDT) EN ISO 17078-4:2010 GOST ISO 17078-4-2015 (IDT) GSO ISO 17078-4:2012

ISO 17824:2009 ed. 1 Petroleum and natural gas industries -- Downhole equipment -- Sand screens TC 67 SC 4 WG 4


API Spec 19SS 1st ed:2009 / ISO 17824:2009

EN ISO 17824:2014 GOST 35504-2013 (ISO 17824:2009,MOD), TC023

GSO ISO 17824 : 2010

10










ISO 28781:2010 ed.1 Petroleum and natural gas industries -- Drilling and production equipment --Subsurface barrier valves and related equipment TC 67 SC 4 WG 4


API Spec 19V 2nd ed:2019 EN ISO 28781:2010 GOST 32503-2013 (ISO 28781:2010,

MOD), TC023 GSO ISO 28781:2014

ISO 10420:1994 WITHDRAWN withdrawn Petroleum and natural gas industries -- Flexible pipe systems for

subsea and marine riser applications TC 67 SC 4 WG 6Status: ISO 10420:1994 Withdrawn https://www.iso.org/standard/18482.html

GB/T 20661-2006 (ISO 10420:1994, IDT)

ISO 13628-1:2005 ed. 2 Amd 1:2010 ISO 13628-1:1999

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations


API RP 17A 5thed:2017

EN ISO 13628-1:2005 + A1:2010

GB/T 24259-2009 (ISO 13623:2000, MOD) GSO ISO 13628-1 : 2010

ISO 13628-10:2005 ed. 1Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe

TC 67 SC 4 WG 6 API Spec 17K 3rd ed:2017 EN ISO 13628-10:2006 GB/T 30217.1-2013 (ISO 13624-

1:2009, IDT) GSO ISO 13628-10:2015

ISO 13628-11:2007 ed. 1 Cor 1:2008 ISO 10420:1994Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 11: Flexible pipe systems for subsea and marine applications

TC 67 SC 4 WG 6 API RP 17B 5th edition:2014 (MOD)

EN ISO 13628-11:2008 + AC:2009

SY/T 6917-2012 (ISO 13625:2002, MOD) GSO ISO 13628-11:2015

ISO 13628-15:2011 ed. 1Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 15: Subsea structures and manifolds

TC 67 SC 4 WG 6 RP 17P 1st ed:2013 / ISO 13628-15:2011 EN ISO 13628-15:2011 GSO ISO 13628-15:2015

ISO 13628-2:2006 ed. 2 Cor 1:2009 ISO 13628-2:2000Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 2: Unbonded flexible pipe systems for subsea and marine applications


API Spec 17J 4th ed. :2014 (MOD)

EN ISO 13628-2:2006 + AC:2009

GB/T 21412.15-2017 ( ISO 13628-15:2011, IDT )

GOST R ISO 13628-2-2013 (ISO 13628-2:2006, IDT), TC 023 GSO ISO 13628-2:2009

ISO 13628-3:2000 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems TC 67 SC 4 WG 6 GOST R ISO 13628-3-2013 Withdrawn EN ISO 13628-3:2000 GOST R ISO 13628-3-2013 (ISO

13628-3:2000, IDT),TC 023 GSO ISO 13628-3:2009

ISO 13628-4:2010 ed. 2 Cor 1: 2011 ISO 13628-4:1999Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 4: Subsea wellhead and tree equipment

TC 67 SC 4 WG 6 ST RK ISO 13628-4-2016 API Spec 17D 2nd edition (IDT)

EN ISO 13628-4:2010 + AC:2011 GOST R ISO 13628-4-2016 (IDT) GSO ISO 13628-4:2015

(to include Amend 1)

ISO 13628-5:2009 ed. 2 ISO 13628-5:2002 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 5: Subsea umbilicals TC 67 SC 4 WG 6 ST RK ISO 13628-5:2009

(ISO 13628-5:2002, IDT)API Spec 17E 5th ed:2017 EN ISO 13628-5:2009 GB/T 21412.15-2017 ( ISO 13628-

15:2011, IDT ) GSO ISO 13628-5:2009

ISO 13628-6:2006 ed. 2 ISO 13628-6:2000Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems

TC 67 SC 4 WG 6 API STD 17F 4thed:2017 EN ISO 13628-6:2006 GB/T 21445.2-2008 (ISO 13628-

2:2000, IDT )

ISO 13628-7:2005 ed. 1Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems

TC 67 SC 4 WG 6 API RP 17G 2nd ed. / ISO 13628-7:2005 (IDT) EN ISO 13628-7:2006 GB/T 21412.3-2009 (ISO 13628-

3:2000, IDT)

ISO 13628-8:2002 ed. 1 Cor 1:2005Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems

TC 67 SC 4 WG 6 API RP 17H 2nd ed.:2013 (MOD) EN ISO 13628-8:2006 GB/T 21412.4-2013 (ISO 13628-

4:2010, IDT ) GSO ISO 13628-8:2009

ISO 13628-9:2000 ed. 1Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems

TC 67 SC 4 WG 6Became part of API RP 17H; withdrawel of API RP 17M 1st ed.

EN ISO 13628-9:2006 GB/T 21412.5-2017 (ISO 13628-5:2009, IDT ) GSO ISO 13628-9:2015

ISO 18647:2017 ed. 1 Petroleum and natural gas industries -- Modular drilling rigs for offshore fixed platforms TC 67 SC 4 WG 8

ISO 10405:2000 ed. 2 ISO 10405:1993 Petroleum and natural gas industries -- Care and use of casing and tubing TC 67 SC 5 WG 1

ST RK ISO 10405-2011 (ISO 10405:2000)ST RK 1256-2004 (ISO 10405:2000, NEQ);GOST 34380-2017 (ISO 10405:2000)

API RP 5C1 18th ed:1999 EN ISO 10405:2006 GB/T 17745-2011 (ISO 10405:2000,

IDT)GOST R 56175-2014 (ISO 10405:2000, MOD),TC 357 GSO ISO 10405:2015

ISO 11960:2014 ed. 5ISO 2645:1975; ISO 11960:1996; ISO 11960:2001; ISO 11960:2004; ISO 11960:2011

rev Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells TC 67 SC 5 WG 1

GOST 31446-2012ST RK ISO 11960:2009 (ISO 11960:2004, IDT)

API Spec 5CT 10th ed:2018 (MOD) EN ISO 11960:2014 GSO ISO 11960:2014

ISO 11961:2018 ed. 3 Cor 1:2009 ISO 11961:1996; ISO 11961:2008 Petroleum and natural gas industries -- Steel drill pipe TC 67 SC 5 WG 1

ST RK ISO 11961:2009 (ISO 11961:2008, IDT)GOST 32696 (ISO 11961:2008)

API Spec 5DP 1st ed./ ISO 11961:2008 (IDT)

EN ISO 11961:2008 + AC:2009

GOST 32696-2014 (ISO 11961:2008,MOD), TC 357

GSO ISO 11961 : 2009

ISO 15463:2003 ed. 1 Cor 1:2009 Petroleum and natural gas industries -- Field inspection of new casing, tubing and plain-end drill pipe TC 67 SC 5 WG 1 ST RK ISO 15463:2006

(ISO 15463:2003, IDT)API RP 5A5 7th edition/ISO 15463:2003

EN ISO 15463:2003 + AC:2009

ISO 13679:2002 ed. 1 rev Petroleum and natural gas industries -- Procedures for testing casing and tubing connections TC 67 SC 5 WG 2 ST RK 1262:2004 (ISO

13679:2002, NEQ)API RP 5C5 4thed:2017 EN ISO 13679:2006 GB/T 21412.8-2010 (ISO 13628-

8:2002, IDT)

ISO/PAS 12835:2013 ed. 1 rev Qualification of casing connections for thermal wells TC 67 SC 5 WG 2 [Not adopted] GSO ISO/PAS 12835:2016

ISO/TR 10400:2018 ed. 2 ISO 10400:1993; ISO/TR 10400:2007Petroleum and natural gas industries -- Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing

TC 67 SC 5 WG 2

ST RK ISO/TS 10400-2012 (ISO/TR 10400:2007, IDT)GOST R 54918-2012 (ISO/TR 10400:2007)

API TR 5C3, 7th ed.:2018 / ISO 10400:2008(IDT)

CEN ISO/TR 10400:2011 GSO ISO/TR 10400:2009

ISO 13680:2010 ed. 3 ISO 13680:2000; ISO 13680:2008 revPetroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock -- Technical delivery conditions

TC 67 SC 5 WG 3 ST RK ISO 13680:2012 (ISO 13680:2010, IDT)

API Spec 5CRA 1st edition (MOD) EN ISO 13680:2010 GB/T 21412.9-2009 (ISO 13628-

9:2000, IDT) GSO ISO 13680 : 2010

ISO 13678:2010 ed. 3 ISO 13678:2000; ISO 13678:2009Petroleum and natural gas industries -- Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements

TC 67 SC 5 WG 4

ST RK 1264:2004 (ISO 13678:2000, MOD); ST RK ISO 13678:2011 (ISO 13678:2010, IDT)

API RP 5A3 3rd edition:2009 (IDT) EN ISO 13678:2012 GB/T 21412.7-2018 (ISO

13628-7:2005, IDT)GOST R ISO 13678-2015 (ISO 13678-2010, IDT), TC 357 GSO ISO 13678 : 2010

ISO 10418:2003 ed. 2 Cor 1:2008 ISO 10418:1993 revPetroleum and natural gas industries -- Offshore production installations -- Analysis, design, installation and testing of basic surface process safety systems

TC 67 SC 6 WG 1 ST RK ISO 10418-2005 (ISO 10416:2003, IDT)

API RP 14C 8th ed: 2017

EN ISO 10418:2003 + AC:2009 GSO ISO 10418 : 2010

ISO 13702:2015 ed. 2 ISO 13702:1999Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- Requirements and guidelines


API RP 14G 4th ed:2007 EN ISO 13702:2015 GB/T 23512-2015 (ISO 13678:2010,

IDT) GSO ISO 13702 : 2010

ISO 15544:2000 ed. 1 Amd 1:2009

Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency response TC 67 SC 6 WG 1 ST RK ISO 15544:2006

(ISO 15544:2000, IDT) EN ISO 15544:2010 GB/T 20972.1-2007 (ISO 15156-1:2001, IDT)

ISO 17776:2016 ed. 2 ISO 17776:2000Petroleum and natural gas industries -- Offshore production installations -- Major Accident hazard management during the design of new installations

TC 67 SC 6 WG 1 ST RK ISO 17776-2004GOST R ISO 17776-2012 API 14J 2nd ed:2001 EN ISO 17776:2002 GOST R ISO 17776-2012 (ISO

17776:20000, IDT), TC 023 GSO ISO 17776:2016

ISO 15138:2018 ed. 3 ISO 15138:2000; ISO 15138:2007 Petroleum and natural gas industries -- Offshore production installations -- Heating, ventilation and air-conditioning TC 67 SC 6 WG 11 ST RK ISO 15138:2006

(ISO 15138:2000, IDT) EN ISO 15138:2007 ISO 15138:2007 GSO ISO 15138 : 2010

ISO 15138:2018 ed. 1 Petroleum and natural gas industries -- Offshore production installations -- Heating, ventilation and air-conditioning TC 67 SC 6 WG 11 ST RK ISO 15138-2006

(ISO 15138:2000, IDT) GSO ISO 15138:2010

ISO/TS 27469:2010 ed. 1 rev Petroleum, petrochemical and natural gas industries - Method of test for fire dampers TC 67 SC 6 WG 11 CEN ISO/TS 27469:2011 GB/T 31468-2015 (ISO 12747:2011,

IDT) GSO ISO/TS 27469:2012

ISO 23251:2006 WITHDRAWN

Amd 1:2008 Cor 1:2007 rev Petroleum, petrochemical and natural gas industries -- Pressure-

relieving and depressuring systems TC 67 SC 6 WG 12 ST RK ISO 23251:2010 (ISO 23251:2006, IDT)

API Std 521 6th edition:2014 (MOD)

EN ISO 23251:2007 [status: withdrawn] GSO ISO 23251 : 2008

ISO 28300:2008 ed. 1 Cor 1:2009 Petroleum, petrochemical and natural gas industries -- Venting of atmospheric and low-pressure storage tanks TC 67 SC 6 WG 12 ST RK ISO 28300:2010

(ISO 28300:2008, IDT)API Std 2000, 7th ed.:2014 (MOD)

EN ISO 28300:2008 + AC:2009 GSO ISO 28300:2009

ISO 10438-1:2007 ed. 2 ISO 10438-1:2003Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 1: General requirements

TC 67 SC 6 WG 2Not adopted in KZ (confirmed by KazInSt).(In 2020 Plan of TC89)

API Std 614 5th edition / ISO 10438-1, 2, 3, 4 (IDT)

EN ISO 10438-1:2007 GSO ISO 10438-1:2009

ISO 10438-2:2007 ed. 2 ISO 10438-2:2003Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 2: Special-purpose oil systems



EN ISO 10438-2:2007 GSO ISO 10438-2:2009

ISO 10438-3:2007 ed. 2 ISO 10438-3:2003Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 3: General-purpose oil systems



EN ISO 10438-3:2007 GSO ISO 10438-3:2009

11










ISO 10438-4:2007 ed. 2 ISO 10438-4:2003Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 4: Self-acting gas seal support systems


API Std 614 5th edition / ISO 10438-1, 2, 3, 4 (MOD)

EN ISO 10438-4:2007 GSO ISO 10438-4:2009

ISO 10437:2003 ed. 2 ISO 10437:1993 Petroleum, petrochemical and natural gas industries -- Steam turbines -- Special-purpose applications TC 67 SC 6 WG 3 ST RK ISO 10437:2012

(ISO 10437:2003, IDT)API Std 612 7th edition:2014 EN ISO 10437:2003 GSO ISO 10437:2008

ISO 13703:2000 ed. 1 Cor 1:2002 Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms TC 67 SC 6 WG 5 ST RK ISO 13703:2006

(ISO 13703:2000, IDT)API RP 14E 5th ed:1991

EN ISO 13703:2000 + AC:2007 GSO ISO 13703 : 2010

ISO 14692-1:2017 ed. 2 ISO 14692-1:2002Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials

TC 67 SC 6 WG 5 ST RK 1255-1:2004 (ISO 14692-1:2002, MOD) EN ISO 14692-1:2002 GB/T 20172-2006 (ISO 14224:1999,

IDT) GSO ISO 14692-1:2008

ISO 14692-2:2017 ed. 2 ISO 14692-2:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture TC 67 SC 6 WG 5 ST RK 1255-2:2004 (ISO

14692-2:2002, MOD)EN ISO 14692-2:2002 + AC:2006

GB/T 20970-2015 (ISO 14310:2008, MOD) GSO ISO 14692-2:2008

ISO 14692-3:2017 ed. 2 ISO 14692-3:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design TC 67 SC 6 WG 5

ST RK ISO 14692-3-2018ST RK 1255-3:2004 (ISO 14692-3:2002, MOD)

EN ISO 14692-3:2002 + AC:2006


ISO 14692-4:2017 ed. 2 ISO 14692-4:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation TC 67 SC 6 WG 5 ST RK 1255-4:2004 (ISO

14692-4:2002, MOD)EN ISO 14692-4:2002 + AC:2007


ISO 15649:2001 ed. 1 Petroleum and natural gas industries -- Piping TC 67 SC 6 WG 5 ABNT NBR ISO 15649 : 2004

ST RK ISO 15649:2011 (ISO 15649:2001, IDT); ST RK 1267:2004 (ISO 15649:2001, MOD)

CEN/TR 14549:2004 [Guide to use ISO 15649:2001 in EU context]

GB/T 35988-2018 (ISO 15589-2:2012, NEQ) GSO ISO 15649:2015

ISO 24817:2017 ed. 2 ISO 24817:2015Petroleum, petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design, installation, testing and inspection

TC 67 SC 6 WG 5 ST RK ISO 24817:2010 (ISO/TS 24817:2006, IDT) EN ISO 24817:2015 GSO ISO 24817 : 2010

ISO 27509:2012 ed.1 Cor 1:2013 Petroleum and natural gas industries -- Compact flanged connections with IX seal ring TC 67 SC 6 WG 5 GOST ISO 27509-2016 EN ISO 27509:2012 +

AC:2013GB/T 34903.1-2017 (ISO 23936-1:2009.MOD)

ISO 12211:2012 ed. 1 Petroleum, petrochemical and natural gas industries -- Spiral plate heat exchangers TC 67 SC 6 WG 8 GOST ISO 12211-2016 API Std 664 1st

ed:2014 EN ISO 12211:2012 GB/T 19830-2017 (ISO 11960:2014, IDT) GSO ISO 12211:2014

ISO 12212:2012 ed. 1 Petroleum, petrochemical and natural gas industries -- Hairpin-type heat exchangers TC 67 SC 6 WG 8 GOST ISO 12212-2016 API Std 663 1st

ed:2014 EN ISO 12212:2012 GB/T 29166-2012 (ISO 11961:2008, MOD) GSO ISO 12212:2015

ISO 13704:2007 ed. 2 Cor 1:2008 ISO 13704:2001 Petroleum, petrochemical and natural gas industries -- Calculation of heater-tube thickness in petroleum refineries TC 67 SC 6 WG 8 ST RK ISO 13704:2011

(ISO 13704:2007, IDT)API Std 530 7th edition:2015 (MOD)

EN ISO 13704:2007 + AC:2009

GB/T 23802-2015 (ISO 13680:2010, IDT) GSO ISO 13704:2008

ISO 13705:2012 ed. 3 ISO 13705:2001; ISO 13705:2006 Petroleum, petrochemical and natural gas industries -- Fired heaters for general refinery service TC 67 SC 6 WG 8 GOST R 53682-2009 (ISO

13705:2006) Std 560 5th ed:2016 EN ISO 13705:2012 GOST R 53682-2009 (ISO 13705:2005, MOD), TC 023 GSO ISO 13705:2014

ISO 13706:2011 ed. 3 ISO 13706:2000; ISO 13706:2005 Petroleum, petrochemical and natural gas industries -- Air-cooled heat exchangers TC 67 SC 6 WG 8

ST RK ISO 13706:2009 (ISO 13706:2005, IDT); GOST ISO 13706:2011 (ISO 13706:2000, IDT)

API Std 661 7th edition:2013 (MOD) EN ISO 13706:2011 GB/T 20660-2006 (ISO 13702:1999,

IDT) GSO ISO 13706:2015

ISO 15547-1:2005 ed. 1 ISO 15547:2000 Petroleum, petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 1: Plate-and-frame heat exchangers TC 67 SC 6 WG 8

ST RK ISO 15547:2004 (ISO 15547:2000, IDT)GOST ISO 15547-1-2016ГОСТ Р ISO 15547-1-2009

API Std 668 1st ed:2018 EN ISO 15547-1:2005 GB/T 20972.3-2008 (ISO 15156-

3:2003, MOD)GOST R ISO 15547-1-2009 (ISO 15547-1:2005, IDT), TC 023 GSO ISO 15547-1:2008

ISO 15547-2:2005 ed. 1 ISO 15547:2000Petroleum, petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 2: Brazed aluminium plate-fin heat exchangers

TC 67 SC 6 WG 8 ST RK ISO 15547-2004 (ISO 15547:2000)

API Std 668 1sted:2018 EN ISO 15547-2:2005 GB/T 20656-2006 (ISO 15463:2003,

IDT) GSO ISO 15547-2:2008

ISO 16812:2019 ed. 3 ISO 16812:2002; ISO 16812:2007 Petroleum, petrochemical and natural gas industries -- Shell-and-tube heat exchangers TC 67 SC 6 WG 8 ST RK ISO 16812:2004

(ISO 16812:2002, IDT)API Std 660 9th ed.:2015 (MOD) EN ISO 16812:2007 GB/T 21410-2015 (ISO 16070:2005,

MOD)GOST R 53677-2009 (ISO 16812:2007, MOD), TC 023 GSO ISO 16812 : 2008

ISO 25457:2008 ed. 1 Petroleum, petrochemical and natural gas industries -- Flare details for general refinery and petrochemical service TC 67 SC 6 WG 8 ST RK ISO 25457:2011

(ISO 25457:2008, IDT)API Std 537 3rd ed:2017 EN ISO 25457:2008 GSO ISO 25457 : 2009

ISO 10441:2007 ed. 2 ISO 10441:1999Petroleum, petrochemical and natural gas industries -- Flexible


API Std 671 4th edition / ISO 10441:2007 (IDT) EN ISO 10441:2007 GSO ISO 10441:2008

ISO 14691:2008 ed. 2 ISO 14691:1999

couplings for mechanical power transmission -- Special-purpose applicationsPetroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications


(National Adoption undercommittee consider.)

EN ISO 14691:2008 GB/T 24258-2009 (ISO 13880:1999, MOD) GSO ISO 14691:2009

ISO 19900:2013 ed. 2 ISO 19900:2002; ISO 13819-1:1995 Petroleum and natural gas industries -- General requirements for offshore structures TC 67 SC 7 WG 1 ABNT NBR ISO 19900 : 2004

ST RK ISO 19900-2016GOST R 54483-2011 (ISO 19900:2002)

EN ISO 19900:2002 CAN/CSA ISO 19900:14 GOST R 54483-2011 (ISO 19900:2002, IDT), TC 023 GSO ISO 19900:2008

ISO 19901-4:2016 ed. 2 ISO 19901-4:2003Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerations


API RP 2GEO 1st ed:2011 / ISO 19901-2:2004 (MOD)

EN ISO 19901-4:2003 CAN/CSA ISO 19901-4:17 GB/T 23511-2009 (ISO 19900:2002, IDT) GSO ISO 19901-4:2011

ISO 19901-8:2014 ed. 1 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 8: Marine soil Investigations TC 67 SC 7 WG 10 ST RK ISO 19901-8-2016 EN ISO 19901-8:2015 CAN/CSA ISO 19901-8:15

ISO 10855-1:2018 ed. 1 Offshore containers and associated lifting sets -- Part 1: Design, manufacture and marking of offshore containers TC 67 SC 7 WG 11 API Std 2CCU:2017 GB/T 5005-2010 (ISO 13500:2008,

MOD)

ISO 10855-2:2018 ed. 1 Offshore containers and associated lifting sets -- Part 2: Design, manufacture and marking of lifting sets TC 67 SC 7 WG 11 API Std 2CCU:2017 SY/T 6960-2013 (ISO 10497:2010,

MOD)

ISO 10855-3:2018 ed. 1 Offshore containers and associated lifting sets -- Part 3: Periodic inspection, examination and testing TC 67 SC 7 WG 11 API Std 2CCU:2017

ISO 19901-1:2015 ed. 2 ISO 19901-1:2005Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 1: Metocean design and operating considerations

TC 67 SC 7 WG 3API RP 2MET 1st ed:1st ed:2014 / ISO 19901-1:2006 (MOD)

EN ISO 19901-1:2005 CAN/CSA ISO 19901-1:16 GOST R 57148-2016 (MOD) GSO ISO 19901-1:2012

ISO 19901-2:2017 ed. 2 ISO 19901-2:2004 rev Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria TC 67 SC 7 WG 3

ST RK ISO 19901-2-2006GOST R 57123-2016 (ISO 19901-2:2004)

API RP 2EQ 1t ed:2014 / ISO 19901-2:2004 (MOD)


ISO 19901-3:2014 ed. 2 ISO 19901-3:2010 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 3: Topsides structure TC 67 SC 7 WG 3 ST RK ISO 19901-2:2006

(ISO 19901-2:2004, IDT)

API RP 2TOP 1st ed:2019 / ISO 19901-3:2010


ISO 19902:2007 ed. 1 Amd 1: 2013 ISO 13819-2:1995 rev Petroleum and natural gas industries -- Fixed steel offshore

structures TC 67 SC 7 WG 3 API RP 2A-LRFD 2nd ed:2019 EN ISO 19902:2007 CAN/CSA Z19902:09 GOST 34476-2018 (MOD), TC023

GSO ISO 19902:2010((include Amend 1)

ISO 19903:2006 ed. 1 rev Petroleum and natural gas industries -- Fixed concrete offshore structures TC 67 SC 7 WG 4 GOST ISO 19903-2015 EN ISO 19903:2006 CAN/CSA ISO 19903:07 GSO ISO 19903:2012

ISO 19901-7:2013 ed. 2 ISO/TR 13637:1997; ISO 19901-7:2005Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units


API RP 2SK 3rd ed:2005 EN ISO 19901-7:2013 CAN/CSA ISO 19901-7:14 GSO ISO 19901-7:2014

ISO 19904-1:2006 ed. 1 rev Petroleum and natural gas industries -- Floating offshore structures -- Part 1: Monohulls, semi-submersibles and spars TC 67 SC 7 WG 5 API RP 2FPS 2nd

ed.:2011 (MOD) EN ISO 19904-1:2006 CAN/CSA ISO 19904-1:07

ISO 19901-5:2016 ed. 2 ISO 19901-5:2003 revPetroleum and natural gas industries -- Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction

TC 67 SC 7 WG 6 ABNT NBR ISO 19901-5 : 2006 ST RK ISO 19901-5-2006 EN ISO 19901-5:2003 CAN/CSA ISO 19901-5:16 GOST Р 58036-2017 (MOD) GSO ISO 19901-5:2011

ISO 19905-1:2016 ed. 2 ISO 19905-1:2012 Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 1: Jack-ups TC 67 SC 7 WG 7 ST RK ISO 19905-1-2016 EN ISO 19905-1:2012 CAN/CSA Z19905-1:13 GSO ISO 19905-1:2014

ISO 19905-3:2017 ed. 1 Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 3: Floating unit TC 67 SC 7 WG 7

ISO/TR 19905-2:2012 ed. 1Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 2: Jack-ups commentary and detailed sample calculation

TC 67 SC 7 WG 7 CAN/CSA-ISO/TR 19905-2:14 GSO ISO/TR 19905-2:2017

ISO 19906:2010 ed. 1 rev Petroleum and natural gas industries -- Arctic offshore structures TC 67 SC 7 WG 8 EN ISO 19906:2010 CAN/CSA ISO 19906:11

ISO 19901-6:2009 ed. 1 Cor 1: 2011 rev Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 6: Marine operations TC 67 SC 7 WG 9 API RP 2MOP 1st

edition (IDT) EN ISO 19901-6:2009 CAN/CSA ISO 19901-6:10 GSO ISO 19901-6:2011

ISO 35101:2017 ed. 1 Petroleum and natural gas industries -- Arctic operations -- Working environment TC 67 SC 8 WG 1 CSA ISO 35101:19 GOST R 58215-2018 (MOD)

ISO 35103:2017 ed. 1 Petroleum and natural gas industries -- Arctic operations -- Environmental monitoring TC 67 SC 8 WG 3 CSA ISO 35103:19

ISO 35104:2018 ed. 1 Petroleum and natural gas industries -- Arctic operations -- Ice management TC 67 SC 8 WG 4

GOST R 58114-2018 (MOD), GOST R 58051-2018 (MOD), GOST R 58052-2018 (MOD), GOST R 58283-2018(MOD)

ISO/TS 35105:2018 ed. 1 Petroleum and natural gas industries -- Arctic operations -- Material requirements for arctic operations TC 67 SC 8 WG 5

ISO 35106:2017 ed. 1 Petroleum and natural gas industries -- Arctic operations -- Metocean, ice, and seabed data TC 67 SC 8 WG 6 CSA ISO 35106:19 GB/T 9711-2017 (ISO 3183:2012,

MOD)GOST R 58113-2018 (MOD); GOST R 58112-2018 (MOD)

ISO 20088-1:2016 ed. 1 Determination of the resistance to cryogenic spillage of insulation materials -- Part 1: Liquid phase TC 67 SC 9 JWG 3

API RP 2N 3rd ed:2013 / ISO 19906:2010 (MOD)

GB/T 35989.1-2018 (ISO 19904-1:2006, IDT)

12










ISO 13879:1999 ed. 1 Petroleum and natural gas industries -- Content and drafting of a functional specification TC 67 WG 2


[not adopted] GSO ISO 13879:2008

ISO 13880:1999 ed. 1 Petroleum and natural gas industries -- Content and drafting of a technical specification TC 67 WG 2

ST RK ISO 13880:2004 (ISO 13880:1999, IDT) GOST R ISO 13880-2010

[not adopted] GSO ISO 13880:2008

ISO/TR 13881:2000 ed. 1 Petroleum and natural gas industries -- Classification and conformity assessment of products, processes and services TC 67 WG 2 ST RK ISO/TR 13881:2006

(ISO/TR 13881:2000, IDT) CEN ISO/TR 13881:2011 GSO ISO/TR 13881:2008

ISO/TS 17969:2017 ed. 2 ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries -- Guidelines on competency for personnel TC 67 WG 2 CEN ISO/TS 17969:2015

ISO/TS 29001:2010 ed. 3 ISO/TS 29001:2003; ISO/TS 29001:2007 rev

Petroleum, petrochemical and natural gas industries -- Sector-specific quality management systems -- Requirements for product and service supply organizations

TC 67 WG 2 ABNT ISO/TS 29001 : 2010ST RK ISO/ТС 29001:2006 (ISO/TS 29001:2003, IDT); API Spec Q1 9th

ed.:2013 (MOD) CEN ISO/TS 29001:2011 GOST R ISO/TS 29001:2007 (ISO 29001:2010, IDT), TC 10

GSO ISO TS 29001 : 2012

ISO 14224:2016 ed. 3 ISO 14224:1999; ISO 14224:2006 Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment TC 67 WG 4 ABNT NBR ISO 14224 : 2011 ST RK 1268:2004 (ISO

14224:1999, MOD)API Std 689 1st edition /ISO 14224:2006 (IDT)

EN ISO 14224:2006 GSO ISO 14224:2009

ISO 15663-1:2000 ed. 1 Petroleum and natural gas industries -- Life cycle costing -- Part 1: Methodology TC 67 WG 4 ST RK 1265-1:2004 (ISO

15663-1:2000, MOD) EN ISO 15663-1:2006 SY/T 5257-2012 (ISO 15590-1:2001, NEQ) GSO ISO 15663-1:2008

ISO 15663-2:2001 ed. 1 Petroleum and natural gas industries -- Life-cycle costing -- Part 2: Guidance on application of methodology and calculation methods TC 67 WG 4 ST RK 1265-2:2004 ( ISO

15663-2:2001, MOD) [not adopted] GB/T 29168.2-2012 (ISO 15590-2:2003, MOD) GSO ISO 15663-2:2008

ISO 15663-3:2001 ed. 1 Petroleum and natural gas industries -- Life-cycle costing -- Part 3: Implementation guidelines TC 67 WG 4 ST RK 1265-3:2004 (ISO

15663-3:2001, MOD) [not adopted] GB/T 29168.3-2012 (ISO 15590-3:2004, MOD) GSO ISO 15663-3:2009

ISO 19008:2016 ed. 1 Standard cost coding system for oil and gas production and processing facilities TC 67 WG 4

ISO 20815:2018 ed. 2 ISO 20815:2008 Petroleum, petrochemical and natural gas industries -- Production assurance and reliability management TC 67 WG 4 ABNT NBR ISO 20815 : 2017


EN ISO 20815:2010 GOST R ISO 20815-2013 (ISO 20815:2015, IDT), TC 023 GSO ISO 20815:2009

ISO/TR 12489:2013 ed. 1 Petroleum, petrochemical and natural gas industries -- Reliability modelling and calculation of safety systems TC 67 WG 4 ST RK ISO 12489-2016 FprCEN ISO/TR 12489

[status: under publication]GSO ISO/TR 12489:2017

ISO 13085:2014 ed. 1 Petroleum and natural gas industries -- Aluminium alloy pipe for use as tubing for wells TC 67 WG 5 GOST ISO 13085-2016 EN ISO 13085:2014 GSO ISO 13085:2017

ISO 15546:2011 ed. 3 ISO 15546:2002; ISO 15546:2007 Petroleum and natural gas industries -- Aluminium alloy drill pipe TC 67 WG 5 ST RK ISO 15546-2011 (ISO 15546:2007, IDT) EN ISO 15546:2011 GSO ISO 15546:2012

ISO 20312:2011 ed. 1 Petroleum and natural gas industries -- Design and operating limits of drill strings with aluminium alloy components TC 67 WG 5 ST RK ISO 20312-2015 EN ISO 20312:2011 GSO ISO 20312:2014

ISO 27627:2014 ed. 1 Petroleum and natural gas industries -- Aluminium alloy drill pipe thread connection gauging TC 67 WG 5 ST RK ISO 27627-2015 EN ISO 27627:2014

ISO 15156-1:2015 ed. 3 ISO 15156-1:2001; ISO 15156-1:2009Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials

TC 67 WG 7

ST RK ISO 15156-1:2011 (ISO 15663-1:2000, IDT)GOST R 53679-2009 (ISO 15156-1:2001)

NACE MR0175-2015 / ISO 15156 Series:2015

EN ISO 15156-1:2015 [status: to be published soon]

GB/T 35148-2017 (ISO 14998:2013, MOD)

GOST ISO 15156-1-2013 (ISO 15156-1:2009, IDT), TC 023 GSO ISO 15156-1:2010

ISO 15156-2:2015 ed. 3 ISO 15156-2:2003; ISO 15156-2:2009Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

TC 67 WG 7

ST RK ISO 15156-2:2011 (ISO 15663-2:2001, IDT)GOST R 53678-2009 (ISO 15156-2:2003)



GB/T 21411.1-2014 (ISO 15136-1:2009, MOD)


ISO 15156-3:2015 ed. 3 ISO 15156-3:2003; ISO 15156-3:2003Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

TC 67 WG 7

ST RK ISO 15156-3-2011 (ISO 15663-3:2001, IDT); GOST ISO 15156-3-2011 (ISO 15156-3:2009, IDT)




ISO 23936-1:2009 ed. 1Petroleum, petrochemical and natural gas industries -- Non-metallic materials in contact with media related to oil and gas production -- Part 1: Thermoplastics

TC 67 WG 7 ST RK ISO 23936-1:2011 (ISO 23936-1:2009, IDT) EN ISO 23936-1:2009

ISO 23936-2:2011 ed. 1Petroleum, petrochemical and natural gas industries -- Non-metallic materials in contact with media related to oil and gas production -- Part 2: Elastomers

TC 67 WG 7 ST RK ISO 23936-2-2016 EN ISO 23936-2:2011 GSO ISO 23936-2:2016

ISO 17348:2016 ed. 1 Petroleum and natural gas industries -- Materials selection for high content CO2 for casing, tubing and downhole equipment TC 67 WG 8 ST RK ISO 17348-2017

ISO 17781:2017 ed. 1Petroleum, petrochemical and natural gas industries -- Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels

TC 67 WG 8

ISO 17782:2018 ed.1 Petroleum, petrochemical and natural gas industries -- Scheme for conformity assessment of manufacturers of special materials TC 67 WG 8

ISO 21457:2010 ed.1 Petroleum, petrochemical and natural gas industries -- Materials selection and corrosion control for oil and gas production systems TC 67 WG 8 ST RK ISO 21457:2011

(ISO 21457:2010, IDT) EN ISO 21457:2010 GB/T 37265-2018 (ISO 20312:2011, IDT)

ISO 16904:2016 ed. 1 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals TC 67 WG 10 ST RK EN ISO 16904-2017

EN ISO 16904:2015 [under CEN/TC 282; status: to be published soon]

ISO 16961:2015 ed. 1 Petroleum, petrochemical and natural gas industries -- Internal coating and lining of steel storage tanks TC 67 WG 11 ST RK ISO 16961-2017 API RP 652 4th

ed:2014 EN ISO 16961:2015 GB/T 29167-2012 (ISO 16708:2006, IDT)

ISO 18796-1:2018 ed. 1Petroleum, petrochemicals and natural gas industries -- Internal coating and lining of carbon steel process vessels -- Part 1: Technical requirements

TC 67 WG 11

ISO 18797-1:2016 ed. 1Petroleum, petrochemical and natural gas industries -- External corrosion protection of risers by coatings and linings -- Part 1: Elastomeric coating systems-polychloroprene or EPDM

TC 67 WG 11

streams with high content of CO2 at high pressures

ST RK ISO 17349-2017ISO 19277:2018 ed. 1Petroleum, petrochemical and natural gas industries -- Qualification testing and acceptance criteria for protective coating systems under insulation TC 67 WG 11

ISO 17945:2015 ed. 1Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

TC 67 EN ISO 17945:2015

ISO 18165:2001WITHDRAWN

ISO 10427-3:2003 withdrawn Petroleum and natural gas industries -- Performance testing of cementing float equipment TC 67 API Spec 10F 4th

ed:2018

ISO 10425:2003 ed. 1 Steel wire ropes for the petroleum and natural gas industries -- Minimum requirements and terms of acceptance TC 105 JWG ST RK ISO 10425-2012

(ISO 10425:2003 IDT)API Spec 9A 26th ed: 2011 GSO ISO 10425:2013

ISO 13709:2009 ed. 2 ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries TC 115 SC 3 JWG 1

ST RK ISO 13709:2004 (ISO 13707:2003 IDT)GOST 32601-2013 (ISO 13709:2009)

API Std 610 11th edition:2010 EN ISO 13709:2009 GSO ISO 13709:2008

ISO 13710:2004 ed. 1 Petroleum, petrochemical and natural gas industries -- Reciprocating positive displacement pumps TC 115 SC 3 JWG 2 ST RK ISO 13710:2006

(ISO 13710:2004 IDT)API Std 674 3rd ed:2010 EN ISO 13710:2004 GSO ISO 13710:2008

ISO 21049 : 2004 ed. 1 Pumps -- Shaft sealing systems for centrifugal and rotary pumps TC 115 SC 3 JWG 2API Std 682 4th ed: 2014 / ISO 21049:2004 (IDT)

EN ISO 21049:2004 GSO ISO 21094:2013

ISO 10439:2002 Petroleum, chemical and gas service industries -- Centrifugal compressors TC 118 SC 1 JWG 1 SC 6 ST RK ISO 10439:2004

(ISO 10439:2002 IDT)API Std 617 8th ed:2017

[revised and split in four parts] GSO ISO 10439:2014

ISO 10439-1:2015 ed. 1 ISO 10439:2002Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 1: General requirements

TC 118 SC 1 JWG 1 SC 6ST RK ISO 10439-2004(ISO 10439:2002 IDT) API Std 617 8th

ed:2017 EN ISO 10439-1:2015 GSO ISO 10439-1:2015

ISO 10439-2:2015 ed. 1 ISO 10439:2002Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 2: Non-integrally geared centrifugal and axial compressors

TC 118 SC 1 JWG 1 SC 6 ST RK ISO 10439:2004 (ISO 10439:2002 IDT)

API Std 617 8th ed:2017 EN ISO 10439-2:2015 GSO ISO 10439-2:2015

ISO 10439-3:2015 ed. 1 ISO 10439:2002Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 3: Integrally geared centrifugal compressors



ISO 10439-4:2015 ed. 1 ISO 10439:2002Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 4: Expander-compressors



13

ISO 17349:2016 ed. 1 Petroleum and natural gas industries -- Offshore platforms handling TC 67 WG 12










ISO 10440-1:2007 ed. 2 ISO 10440-1:2000 Petroleum, petrochemical and natural gas industries -- Rotary-type positive-displacement compressors -- Part 1: Process compressors TC 118 SC 1 JWG 3 SC 6 ST RK ISO 10440-1: 2004

(ISO 10440-1:2000 IDT)

API Std 619 5th edition:2010 / ISO 10440-1:2007 (IDT)

EN ISO 10440-1:2007 GSO ISO 10440-1:2013

ISO 10440-2:2001 ed. 1Petroleum and natural gas industries -- Rotary-type positive-displacement compressors -- Part 2: Packaged air compressors (oil-free)

TC 118 SC 1 JWG 3 SC 6 ST RK ISO 10440-2: 2004 (ISO 10440-2:2001 IDT) EN ISO 10440-2:2001 GSO ISO 10440-2:2013

ISO 10442:2002 ed. 1 Petroleum, chemical and gas service industries -- Packaged, integrally geared centrifugal air compressors TC 118 SC 1 JWG 1 SC 6 ST RK 10442:2004

(ISO 10442:2002 IDT)API Std 672 4th ed:2004 EN ISO 10442:2002 GSO ISO 10442:2014

ISO 13631:2002 ed. 1 Petroleum and natural gas industries -- Packaged reciprocating gas compressors TC 118 SC 1 JWG 2 SC 6

ST RK ISO 13631-2004GOST R 54802-2011 (ISO 13631:2002)

EN ISO 13631:2002 GB/T 21412.6-2018 (ISO 13628-6:2006, IDT) GOST R ISO 13631:2002, TC 023 GSO ISO 13631:2014

ISO 13707:2000 ed. 1 Petroleum and natural gas industries -- Reciprocating compressors TC 118 SC 1 JWG 2 SC 6

ST RK ISO 13707:2004 (ISO 13707:2000 IDT)GOST 31843-2013 (ISO 13707:2000)

API Std 618 5th ed:2007 [status: abandoned] GB/T 23803-2009 (ISO 13703:2000,

IDT) GSO ISO 13707:2015

ISO 10434:2004 ed. 2 ISO 10434:1998 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries TC 153 SC 1 JWG 1 SC 6 ST RK ISO 10434:2006

(ISO 10434:2004 IDT)API Std 600 13th ed:2015

EN ISO 10434:2004 [under CEN/TC 69]

GB/T 28259-2012 (ISO 10432:2004, MOD ) GSO ISO 10434:2013

ISO 10497:2010 ed. 3 ISO 10497:2004; ISO 10497:1992 Testing of valves -- Fire type-testing requirements TC 153 SC 1 JWG 6 SC 6 ST RK ISO 10497-2010 (ISO 10497:2010 IDT)

API Std 607 5th edition / ISO 10497

EN ISO 10497:2010 [under CEN/TC 69] GSO ISO 10497:2013

ISO 15761:2002 ed. 1 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries TC 153 SC 1 JWG 1 SC 6 ST RK 15761:2004

(ISO 15761:2002 IDT)API Std 602 10th ed:2015 EN ISO 15761:2002 GSO ISO 15761:2013

ISO 17292:2015 ed. 2 ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries TC 153 SC 1 JWG SC 6 ST RK ISO 17292 - 2010 API Std 608 5th ed:2012

EN ISO 17292:2004 [under CEN TC/69]

SY/T 6915.1-2012 (ISO 17078-1:2004, MOD) GSO ISO 17292:2013

ISO 3977-3:2004 ed. 2 Gas turbines -- Procurement -- Part 3: Design requirements TC 192 SC 6 WG 4 GSO ISO 3977-3:2015

ISO 18888:2017 ed. 1 Gas turbine combined cycle power plants -- Thermal performance tests TC 192 WG 14

ISO 3977-5:2001 ed. 1 Gas turbines -- Procurement -- Part 5: Applications for petroleum and natural gas industries TC 192 WG 4 ST RK ISO 3977-5-2012

(ISO 3977-5:2001, IDT) GSO ISO 3977-5:2015

ISO 3977-7:2002 ed. 1 Gas turbines -- Procurement -- Part 7: Technical information TC 192 WG 4 GSO ISO 3977-7:2015

ISO 3977-8:2002 ed. 1 Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning TC 192 WG 4 GSO ISO 3977-8:2015

ISO 13691:2001 ed. 1 Petroleum and natural gas industries -- High-speed special-purpose gear units TC 60 SC 2 JWG SC 6 API Std 613 5th

ed:2003 EN ISO 13691:2002 GSO ISO 13691:2009

14

For further information and publications, visit the website at

http://www.iso.org

15

http://www.iso.org

Global standards used locally worldwide - ISO...ST RK ISO 15590-2:2007 (ISO 15590-2:2003, IDT) EN...

Documents

Transcript of Global standards used locally worldwide - ISO...ST RK ISO 15590-2:2007 (ISO 15590-2:2003, IDT) EN...