GLOBAL PROCESS EQUIPMENT, INC.bidonequipment.info/s/GLOBAL PROCESS EQUIPMENT... · Kneader Extruder...
Transcript of GLOBAL PROCESS EQUIPMENT, INC.bidonequipment.info/s/GLOBAL PROCESS EQUIPMENT... · Kneader Extruder...
DOUBLE-ARM MIXER WITH EXTRUSION SCREW
GLOBAL PROCESS EQUIPMENT, INC. SUBSIDIARY OF CHARLES ROSS AND SON COMPANY
Packaging - Processing
Bid on Equipment 1-847-683-7720
www.bid-on-equipment.com
1-847-683-7720
WORKING CAP. GAL. A C
5 51 32 41 51 34 40
4 0 57 46 53
60 64 52 60 120 77 60 69 175 77 62 71 250 81 72 82
400 98 83 93 500 98 85 95 800 114 95 120
1000 118 98 123
19 I 5 18 5
F 60 68
24 7 82 26 9 99 28 11 118 27 12 123 33 14 141 36 16 163 36 16 171 36 17 202
34 20 212
Kneader Extruder Discharge end with perforated die
Extrusion discharge screw partially withdrawn. plate and star knife. Conical mouth-piece swung away.
An extrusion discharge screw is mounted underneath a conventional sigma blade mixer. It eliminates the tedious labor involved in emptying a tilt type kneader. During the mixing cycle, it moves the materials within the reach of the kneader blades. For discharging, its direction of rotation is reversed and it extrudes the mixture through a suitable die opening in the side of the machine.
This unit can mix and extrude a wide range of materials including rubber and neoprene compounds, thermoplastics, chewing gum, crayons, butyl tapes, carbon electrodes and hot melts. Working capacities range from 5 to 1,000 gallons. Units are constructed of carbon steel or stainless steel and can be equipped with heating or cooling jackets. Also available is an electrically heated, atmospheric oil jacket. Unit can be equipped for vacuum operation. A wide range of horsepower selections for kneader blades and screw is available in either single or variable speeds.
There are various extrusion dies to suit your requirements including pelletizing head. Extrusion screw is easily removable for cleaning.
Optionally, the mixing blades and extrusion screw can be cored for heating or cooling. Extrusion head can also be heated and a longer extrusion screw is available in some sizes.
KNEADER EXTRUDER
www.bid-on-equipment.com
PackagingProcessing Bid on Equipment
1-847-683-7720 www.bid-on-equipment corn
*Dimensions for 400 gallon Kneader and larger reflect overall dimensions. For picture see top right illustration.
ModellEU: 5 to 250 gallons.
WORKIP44 CAR 4AL.
5 Rugged tilt type unit has working capacities from 5 to 15 1,000 gallons. 40
Motorized hydraulic tilting device is integral part of the machine. Internal finish facilitates cleaning. The
60 120 co r is equipped with a safety switch which
off current to the motor when the cover is 175 opened. Various options as described for 250
the Kneader Extruder are available. 400* 500* Soo*
SIGMA-BLADE KNEADER 1000*
Modeli71.1: 400 to 1000 gallons.
37
42
64- 72 71
75 84
35 24 46 66
40 SI 72 47 24 62 92 50 67 107
61 29 131
61 28 84 135
63 32 94
88 69 128 199 91 130 204
144. 231
83 165 234
Careful design and rugged construction make this sigma blade kneader suitable for processing materials falling within the widest range of viscosities and densities. The drive, bearings, and stuffing boxes meet the most difficult requirements. A lever is provided for tilting the trough over a low-lying frontal axis. Totally enclosed motors in three different horsepowers are offered for each size. Optional requirements for electrically heated oil or steam jackets, vacuum and materials of construction can be filled. Available working capacities are: 1 quart, 1 gallon and 2 gallons.
LABORATORY KNEADER
FROM OUR GLOBAL PROCESS EQUIPMENT DIVISION
710 Old Willets Path Hauppa
(51
At your service a fully equipped service lab for ROSS and GPE customers featuring 2-and 3-roll mills, kneaders, blenders, high intensity and shear bar mixers and a combined test plant for rubber and plastics. No obligation.
Packaging - Processing
Bid on Equipment 1-847-683-7720