LSA

W P

IPE

S

COMPETITIVE EDGE: Technical management by EEW Group, with 75 years of experience in LSAW pipe production.

First manufacturer of heavy wall LSAW Pipe up to 50.8 mm in the Middle East.

State-of-the-art Manufacturing equipment and process for efficient and flexible pipe production.

JCO+E or +C / Roll Bending Process, 3 inside welding lines, 4 outside welding lines for DSAW welding with up to 4 wires.

Mechanical Expander

GLOBAL PIPE COMPANY (GPC)

STRUCTURAL TUBULAR(Roll Bending Process)

LINE PIPE / STRUCTURAL TUBULAR(JCO Process)

MANUFACTURING FACILITIES57,000 m2 covered area, 120,000 m2 land area

Specification: API 5L Gr. B - X100Size: 16” – 62” (406.4 – 1574.8 mm)Thickness: up to 2” (50.8 mm)Length: Max 13.2 mCapacity: 170,000 MT/ YearApplication: Onshore / Offshore Oil and Gas Transmission Lines Sour Service (in house HIC / SSC test facilities)Additional services: induction bends, pipe coating, heat treatment

Specification: API 2B, Material to API, ASTM, ENSize: 46” – 200” (1168.40 – 5080 mm)Thickness: up to 6.61” (168 mm)Length: Max 36 m assembled lengthCapacity: 30,000 MT/ YearApplication: Leg Cans, Bracings for Offshore Structures Conductor Pipes Piling Pipes Civil construction

Additional services: Pre-fabrication services

A Saudi-German joint venture established betweenErndtebrücker Eisenwerk GmbH (EEW), Saudi Steel Pipe(SSP), Mr. Ahmed Al-Khonaini and Pan Gulf Holding (PGH).

0.35 0.39 0.43 0.47 0.51 0.55 0.59 0.63 0.67 0.71 0.75 0.79 0.83 0.87 0.91 0.94 0.98 1.02 1.06 1.10 1.14 1.18 1.22 1.26 1.30 1.34 1.38 1.42 1.46 1.50 1.54 1.57 1.61 1.65 1.69 1.73 1.77 1.81 1.85 1.89 1.93 1.97 2.01 2.05

9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 49.0 50.0 51.0 52.0

16.00018.00020.00022.00024.00026.00028.00030.00032.00034.00036.00038.00040.00042.00044.00046.00048.00050.00052.00054.00056.00058.00060.00062.000

(Inch)406.40457.20508.00558.80609.60660.40711.20762.00812.80863.60914.40965.201016.001166.801117.601168.401219.201270.001320.801371.601422.401473.201524.001574.80(mm)

JCO(E/C )Post B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-720 N/S q.mm

JCO(E/C )Post B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-500 N/S q.mm

JCO(E/C )Pre B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-720 N/S q.mm (by special agreement)

GLOBAL PIPE COMPANY, SAUDI ARABIAPIPE SIZES AND RANGE:Pipe Manufactururing type JCO Process (E/C - Expander/Calibration)

1.5 1.6 1.7 1.8 2.0 2.2 2.3 2.5 2.6 2.8 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.6 4.8 4.9 5.0 5.1 5.2 5.4 5.5 5.6 5.7 5.8 5.9 6.1 6.2 6.3 6.4 6.5 6.6

37.0 40.0 43.0 46.0 52.0 55.0 58.0 64.0 67.0 70.0 73.0 76.0 82.0 85.0 88.0 91.0 94.0 97.0 100.0 103.0 106.0 109.0 112.0 115.0 118.0 121.0 124.0 127.0 130.0 133.0 136.0 139.0 142.0 145.0 148.0 151.0 154.0 157.0 160.0 163.0 166.0 168.0

46.00056.00065.00074.00083.00092.000100.000109.000118.000127.000136.000145.000154.000162.000171.000180.000189.000

(Inch)1168.401422.401651.001879.602108.202336.802540.002768.602997.203225.803454.403683.003911.604114.804343.404572.004800.60(mm)

Max. Yield 420 N/Sq.mmMax. Yield 260 N/Sq.mm

PIPE SIZES AND RANGE:Pipe Manufactururing type 4-RollBending Process (Max. 4.2 Mtrs Length)

Note: Pipe length more than 4.2Mtrs can be supplied with Circumfrential welds in length up to 36 Meters

OU

TSID

E D

IAM

ETER

OU

TSID

E D

IAM

ETER

Global Pipe company works with an IntegratedManagement System that covers all areas ofQuality, Health, Safety and Environment.

Approved byAmericanPetroleumInstitute

We are certified to:ISO 9001

ISO 14001

OHSAS 18001

API Q1

Global Pipe has full in-house facilitiesfor NDT, destructive and corrosion testing.Our test house and laboratory is equippedwith the latest technology for:

Chemical analysis

UT / RT / MPI / hydrostatic testing up to 350 bar

Impact / tensile test, Drop Weight Tear Test up to 100 KJ

HIC / FPBTWe are member of:American Welding Society®

The American Society forNondistructive Testing Inc.

5L - 09552B - 0142

API 5L

API 2B

ISO / TS 29001

EEW SPC Rostock

EEW PickhanSiegen

EEW CTS Düsseldorf

EEW CTS B.V.

EEW CMS Bejing

EEW GS Dubai

EEW APSSingapore

EEW Korea

EEW Malaysia Shd. Bhd

EEW do BrasilRio de Janeiro

EEW de Mexico

EEW ST Houston USA

EEW DY JapanTokyo

Trading/Administration

Production

EEW ErndtebrückHeadquarters

EEW SPC RostockEEW Korea

EEW Malaysia

GLOBAL PIPE COMPANY, SAUDI ARABIA

EEW Erndtebrück

EEW APSPerth

EEW APSKuala Lumpur

EEW Global Pipe Saudi Arabia(starting 2013)

GLOBAL PIPE COMPANYPART OF A GLOBAL ORGANIZATION

www.eew-group.com

P. O. Box No: 10463Jubail Industrial City 31961Kingdom of Saudi ArabiaTel : +966 13 342 2222Fax : +966 13-341-1641 Email : sales@globalpipe.com.sa www.globalpipe.com.sa