GLOBAL DESADV - Vitesco Technologies...NAD M 1 Freight forwarder's name and address NAD+FW' SG3 O 1...
Transcript of GLOBAL DESADV - Vitesco Technologies...NAD M 1 Freight forwarder's name and address NAD+FW' SG3 O 1...
Generated by GEFEG.FX
Message Implementation Guideline
GLOBAL DESADV
based on DESADVDespatch advice message UN D.07A S3
Version: JAI 2.0Variant: 2010 ContinentalIssue date: 31.10.2008Author: Klaus Hobmeier
GLOBAL DESADV
Structure / Table of Contents
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 2 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
UNB M 1 Interchange headerUNB+UNOC:3+X:1:X+X:1:X+080617:1009+X+X+X+A+1+X+1'
UNH M 1 Message headerUNH+ABC123+DESADV:D:07A:UN:GA0220'
BGM M 1 Beginning of messageBGM+351:::ABC123+ABC123::1+1+AB'
DTM R 1 Despatch advice dateDTM+137:20021201:102'
DTM O 1 Despatch dateDTM+11:20021201:102'
DTM R 1 Estimated arrival dateDTM+132:20021202:102'
DTM O 1 Requested delivery dateDTM+2:20021203:102'
DTM O 1 Requested shipment dateDTM+10:20021201:102'
DTM O 1 Calculation DateDTM+257:20021201:102'
ALI O 1 Material Flow Type Coded ALI+++67'
MEA R 1 Consignment's gross weightMEA+AAX+AAD+KGM:1000'
MEA R 1 Consignment's net weightMEA+AAX+AAL+KGM:950'
MEA O 1 Consignment volume (Total cube)MEA+AAX+ABJ+LTR:345'
MEA O 1 Consignment's loading metersMEA+LMT++MTR:3'
MEA O 1 Number of handling units in shipmentMEA+AAE+:::ABC123+C62:24'
MOA O 1 Packing costMOA+107:100:EUR'
MOA O 1 DeductionsMOA+46:10:EUR'
MOA O 1 Freight chargesMOA+64:200:USD'
MOA O 1 Customs value of the shipmentMOA+40:200000:EUR'
SG1 O 1 Transport document reference
RFF M 1 Transport document referenceRFF+AAS:TD-2002-101:120'
DTM O 1 Reference date (transport document)DTM+171:20021123:102'
SG1 O 1 Conveyance reference number
RFF M 1 Conveyance reference numberRFF+CRN:23/22176:1'
DTM O 1 Reference date (conveyance )DTM+171:20021201:102'
SG1 O 1 Packing list reference
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 3 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
RFF M 1 Packing list referenceRFF+PK:PK-20021123-21:3'
DTM O 1 Reference date (packing list)DTM+171:20021130:102'
SG1 O 1 Fiscal note
RFF M 1 Fiscal noteRFF+ARG:12345:010'
DTM O 1 Reference date (fiscal note)DTM+171:20021201:102'
SG1 O 1 Shipment / delivery note reference
RFF M 1 Shipment / delivery note referenceRFF+AAU:12345'
DTM O 1 Reference dateDTM+171:20021201:102'
SG1 O 99 Air waybill number
RFF M 1 Air waybill numberRFF+AWB:12345:1'
DTM O 1 Reference dateDTM+171:20021001:102'
SG1 O 99 Bill of lading number
RFF M 1 Bill of lading numberRFF+BM:12345:1'
DTM O 1 Reference dateDTM+171:20021001:102'
SG1 O 99 Waybill number
RFF M 1 Waybill numberRFF+AAM:12345:1'
DTM O 1 Reference dateDTM+171:20021001:102'
SG1 O 99 Reference to messages
RFF M 1 Reference to messagesRFF+AAA:ABC123:1'
DTM O 1 Reference dateDTM+171:20021001:102'
SG2 R 1 Ship to
NAD M 1 Ship to's name and addressNAD+ST+33::5'
LOC O 1 Place of dischargeLOC+11+W0001'
LOC O 1 Internal place of destinationLOC+18+Stock1'
SG3 O 1 Ship to's reference (account) number
RFF M 1 Internal account numberRFF+ADE:CN998877'
SG4 O 1 Information contact
CTA M 1 ShipTo's information contactCTA+IC+:Arthur Miller'
COM O 5 Communication meansCOM+001 637 2134 5543:FX'
SG2 R 1 Buyer
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 4 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
NAD M 1 Buyer's name and addressNAD+BY'
LOC O 1 Delivery location (place of discharge)LOC+11+GATE 15:::Gate 15'
LOC O 1 Internal place of destinationLOC+'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:CN998877'
SG3 O 1 VAT number
RFF M 1 VAT numberRFF+VA:DE 88776655'
SG4 O 1 Information contact
CTA M 1 Contact informationCTA+IC+:Arthur Miller'
COM O 5 Communication contactCOM+0049 637 2134 5543:FX'
SG2 O 1 Material release issuer
NAD M 1 Material release issuer's name and addressNAD+MI'
SG4 O 1 Information contact
CTA M 1 Information contactCTA+IC'
COM O 5 Communication contactCOM+'
SG2 O 1 Ultimate Customer
NAD M 1 Ultimate customers's name and addressNAD+UD'
LOC O 1 Place of dischargeLOC+11'
LOC O 1 Internal place of destinationLOC+++X:::X+X:::X'
SG4 O 1 Information contact
CTA M 1 Contact informationCTA+IC'
COM O 5 Communication contactCOM+'
SG2 D 2 Seller / Supplier
NAD M 1 Seller's name and addressNAD+SU+100-98654::92'
LOC O 1 Shipping location / place of loadingLOC+5'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:CN998877'
SG3 O 1 VAT registration number
RFF M 1 VAT registration numberRFF+VA:NL 33224422'
SG4 O 1 Information Contact
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 5 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
CTA M 1 Information ContactCTA+IC+:Hans Hansen'
COM O 5 Communication contactCOM+0031 637 2134 5543:FX'
SG4 O 1 Accounting contact
CTA M 1 Accounting contactCTA+AD'
COM O 5 Communication contactCOM+'
SG4 O 1 Sales contact
CTA M 1 Contact informationCTA+SR'
COM O 5 Communication contactCOM+'
SG2 O 1 Carrier
NAD M 1 Carrier's name and addressNAD+CA'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:12587'
SG2 O 1 Ship from
NAD M 1 Ship from's name and addressNAD+SF'
LOC O 1 Shipping location/ Place of loadingLOC+9'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:36962'
SG4 O 1 Expedition contact
CTA M 1 Expedition contactCTA+EX'
COM O 5 Communication contactCOM+'
SG4 O 1 Information contact
CTA M 1 Information contactCTA+IC+G777'
COM O 5 Communication contactCOM+9987654:TE'
SG2 O 1 Freight forwarder
NAD M 1 Freight forwarder's name and addressNAD+FW'
SG3 O 1 Internal account code
RFF M 1 Internal account codeRFF+ADE:36962'
SG4 O 1 Information contact
CTA M 1 Information contactCTA+IC+:H. Friday'
COM O 5 Communication contactCOM+099 1235 5522 888:FX'
SG4 O 1 Notification contact
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 6 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
CTA M 1 Notification contactCTA+NT'
COM O 5 Communication contactCOM+'
SG2 O 1 Transport Consolidation Center
NAD M 1 Transport Consolidation Center NAD+FZ'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:36962'
SG4 O 1 Information contact
CTA M 1 Information contactCTA+IC'
COM O 5 Communication contactCOM+'
SG4 O 1 Notification contact
CTA M 1 Notification contactCTA+NT'
COM O 5 Communication contactCOM+'
SG2 O 1 Manufacturer
NAD M 1 Manufacturer's name and addressNAD+MF'
SG3 O 1 Internal account number
RFF M 1 Internal account numberRFF+ADE:36962'
SG4 O 1 Information contact
CTA M 1 Contact informationCTA+IC'
COM O 5 Communication contactCOM+'
SG4 O 1 Notification contact
CTA M 1 Contact informationCTA+NT'
COM O 5 Communication contactCOM+'
SG2 O 1 Shikyu-moto
NAD M 1 Shikyu-moto's name and addressNAD+HM'
SG2 D 1 Message Sender
NAD M 1 Message SenderNAD+MS'
SG2 O 1 Message Recipient
NAD M 1 Message Recipient name and addressNAD+MR'
SG2 D 1 Consignor
NAD M 1 Consignor name and addressNAD+CZ'
SG2 O 1 Empty equipment receiving party (Ship to's plant)
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 7 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
NAD M 1 Empty equipment receiving party (Ship to's plant)NAD+DP++::::X'
SG2 O 1 Empty Equipment Despatch Party (Ship from's plant)
NAD M 1 Empty Equipment Despatch Party name and addressNAD+CK'
SG5 O 10 Terms of delivery
TOD M 1 Terms of delivery or transportTOD+1+A+FOB'
LOC O 1 Incoterms placeLOC+1'
FTX O 5 Terms of delivery - descriptive textFTX+AAR++++AA'
SG6 O 10 Means of transport
TDT M 1 Means of transportTDT+12+123+10+11+ABC123::185++G:A+ABC123::5:ABC123:DE+1'
PCD O 1 Capacity usagePCD+36'
SG8 O 10 Equipment
EQD M 1 Equipment detailsEQD+CN+12345'
MEA O 1 LengthMEA+PD+LN+FOT:20'
MEA O 1 WidthMEA+PD+WD+FOT:20'
MEA O 1 HightMEA+PD+HT+FOT:20'
MEA O 1 Gross weightMEA+PD+G+KGM:1000'
MEA O 1 Net weightMEA+PD+AAL+KGM:950'
SG10 M 9999 Despatch control line / group of inner packaging items and article line
CPS M 1 Consignment packing sequenceCPS+10+1+1'
FTX O 1 Free textFTX+AAI'
SG11 O 9999 Group of inner packaging items
PAC M 1 PackagePAC+5+:35:11+BE::92+F+:11'
MEA O 1 Gross weightMEA+AAY+G+KGM:1000'
MEA O 1 Net weight MEA+AAY+AAL+KGM:990'
MEA O 1 LengthMEA+AAY+LN+CMT:100'
MEA O 1 WidthMEA+AAY+WD+CMT:100'
MEA O 1 HeightMEA+AAY+HT+CMT:100'
QTY O 1 Actual quantity per packageQTY+52:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 8 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
QTY O 1 Maximum stackabilityQTY+171:3:C62'
SG13 O 1 Individual packaging item
PCI M 1 Package identificationPCI+17+455485++1J::5'
RFF D 1 Reference to outer packageRFF+ACI:#443'
SG14 O 99 Production batch
GIR M 1 Trigger segmentGIR+1+:BX'
DTM O 1 Production dateDTM+94'
DTM O 1 Last use dateDTM+36'
SG15 O 99 Label number(s)
GIN M 1 Label serial number(s)GIN+ML+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
SG15 O 1 Kanban card number
GIN M 1 Kanban card numberGIN+AL'
SG15 O 1 Buyer's package ID
GIN M 1 Goods identity numberGIN+BU'
SG11 Not used 1 Packaging aid
PAC M 1 PackagePAC+1+:37:7+CODE::10'
SG17 R 9999 Article and Despatched Article
LIN M 1 Line itemLIN+1++ABC123:IN++0'
PIA R 1 Additional product idPIA+1+76543:SA+76543:DR+76543:EC+76543:GS+76543:CL'
PIA O 1 Additional product idPIA+1+76543:UA+76543:MP::92+76543:GB'
PIA O 1 Superseded item number and quality control codePIA+4+76543:SA+76543'
IMD O 25 Item descriptionIMD+++01::10:XYZ iron mount::AA'
MEA O 1 Net weightMEA+PD+AAL+KGM:10'
QTY D 1 Quantity per set QTY+1:10:C62'
QTY R 1 Despatched quantityQTY+12:50:C62'
QTY O 1 Quantity orderedQTY+21:50:C62'
QTY O 1 Quantity to be deliveredQTY+113:50:C62'
QTY O 1 Quantity short shippedQTY+119:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 9 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
QTY O 1 Capacity quantity per packageQTY+X01:10:C62'
ALI O 1 Country of origin, duty regime and nature of transactionALI+SE+1+73'
GIN O 100 Serial Number(s)GIN+BN+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GIN O 100 Engine Number(s)GIN+EE+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GIN O 100 Vehicle Identity Number(s)GIN+VV+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
DTM O 1 Design revision dateDTM+380:20020801:102'
DTM O 1 Engineering change dateDTM+60:20020801:102'
DTM O 1 Delivery date to ultimate customerDTM+191:20021205:102'
DTM O 1 Effective period of delivery instructionDTM+273:0212:609'
DTM O 1 Requested delivery dateDTM+2:20021203:102'
DTM O 1 Requested shipment dateDTM+10:20021201:102'
DTM O 1 Order dateDTM+4:20021115:102'
NAD O 1 ManufacturerNAD+MF'
FTX O 1 Delivery instruction typeFTX+ICN'
FTX O 99 Article long description FTX+LIN'
MOA O 1 Customs declared valueMOA+40:1000.00:EUR'
SG18 O 1 Shipment / Delivery note reference
RFF M 1 Shipment / Delivery note referenceRFF+DQ:12345:020'
DTM O 1 Delivery note dateDTM+171'
SG18 O 5 Delivery instruction / schedule reference and item related contact information
RFF M 1 Delivery instruction / schedule referenceRFF+AAN:12345:050'
CTA O 1 Item related contact informationCTA+DL+:F. Firestone'
DTM O 1 Reference dateDTM+171:20021101:102'
SG18 R 1 Order reference
RFF M 1 Order referenceRFF+ON:ABC123:1'
DTM O 1 Reference dateDTM+171:20021101:102'
SG18 O 99 Individual references
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 10 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
RFF M 1 ReferenceRFF+'
DTM O 1 Reference dateDTM+'
SG19 O 1 Dangerous goods information
DGS M 1 Dangerous goodsDGS+'
FTX O 1 Dangerous goods descriptionFTX+AAD'
FTX O 1 Dangerous goods declaration exceptionFTX+HAZ'
SG20 O 1 Place of discharge
LOC M 1 Place of dischargeLOC+11'
SG20 O 1 Internal place of destination
LOC M 1 Place/location identificationLOC+'
SG20 O 1 Manufacturing process
LOC M 1 Place/location identificationLOC+54'
SG22 O 1 Service package information
PCI M 1 Service Package IDPCI+1'
QTY O 1 Quantity per service packQTY+52'
SG10 O 1 Despatch control line / List of handling unit groups
CPS M 1 Consignment packing sequenceCPS+30++3'
SG11 R 1 Handling unit group details
PAC M 1 PackagePAC++1:35'
MEA O 1 LengthMEA+AAZ+LN+MTR:1.2'
MEA O 1 WidthMEA+AAZ+WD+MTR:1.0'
MEA O 1 HeightMEA+AAZ+HT+MTR:1.2'
MEA O 1 VolumeMEA+AAZ+ABJ+MTQ:1.44'
MEA O 1 Maximum stacking weightMEA+ABR+AFE+KGM:2000'
QTY O 1 Maximum stackabilityQTY+171:2:C62'
QTY O 1 Number of contained packages/itemsQTY+189:10:C62'
SG13 O 1 Shipment / despatch note reference
PCI M 1 TriggersegmentPCI+1'
RFF O 1 Shipment/despatch note referenceRFF+AAU'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 11 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc Content
DTM O 1 Reference dateDTM+171'
DTM O 1 Delivery date, requestedDTM+2'
DTM O 1 Shipment date, requestedDTM+10'
DTM O 1 Actual despatch date / timeDTM+11:9:102'
SG13 M 1000 List of individual handling units
PCI M 1 Handling unit label typePCI+17'
SG15 D 1 Individual handling unit's transport label number
GIN M 1 Individual handling unit's transport label numberGIN+ML'
SG15 R 98 Individual handling unit's label numbers
GIN M 1 Individual packaging item's label numbersGIN+AW'
SG16 O 1 Individual handling unit's weights
COD M 1 Trigger segmentCOD+NO'
MEA O 1 Gross weightMEA+AAZ+AAB'
MEA O 1 Net weightMEA+AAZ+AAA'
SG10 O 9999 Despatch control line / List of Packaging AID
CPS M 1 Consignment packing sequenceCPS+30++2'
SG11 O 9999 Packaging aid
PAC M 1 PackagePAC++:37'
UNT M 1 Message trailerUNT+198+ABC123'
UNZ M 1 Interchange trailerUNZ+1+X'
GLOBAL DESADV
Branching Diagram of Used Segments/Groups
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 12 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
UNBM 1
1
UNHM 1
2
BGMM 1
3
DTMR 1
4
DTMO 1
5
DTMR 1
6
DTMO 1
7
DTMO 1
8
DTMO 1
9
1
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 13 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
1
ALIO 1
10
MEAR 1
11
MEAR 1
12
MEAO 1
13
MEAO 1
14
MEAO 1
15
MOAO 1
16
MOAO 1
17
2
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 14 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
2
MOAO 1
18
MOAO 1
19
SG1O 1
RFFM 1
20
DTMO 1
21
SG1O 1
RFFM 1
22
DTMO 1
23
SG1O 1
RFFM 1
24
DTMO 1
25
SG1O 1
RFFM 1
26
DTMO 1
27
SG1O 1
RFFM 1
28
DTMO 1
29
SG1O 99
RFFM 1
30
DTMO 1
31
3
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 15 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
3
SG1O 99
RFFM 1
32
DTMO 1
33
SG1O 99
RFFM 1
34
DTMO 1
35
SG1O 99
RFFM 1
36
DTMO 1
37
SG2R 1
NADM 1
38
LOCO 1
39
LOCO 1
40
SG3O 1
RFFM 1
41
SG4O 1
CTAM 1
42
COMO 5
43
SG2R 1
NADM 1
44
LOCO 1
45
5
4
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 16 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
4
LOCO 1
46
SG3O 1
RFFM 1
47
SG3O 1
RFFM 1
48
SG4O 1
CTAM 1
49
COMO 5
50
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 17 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
5
SG2O 1
NADM 1
51
SG4O 1
CTAM 1
52
COMO 5
53
SG2O 1
NADM 1
54
LOCO 1
55
LOCO 1
56
SG4O 1
CTAM 1
57
COMO 5
58
SG2D 2
NADM 1
59
LOCO 1
60
SG3O 1
RFFM 1
61
SG3O 1
RFFM 1
62
SG4O 1
CTAM 1
63
COMO 5
64
7
6
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 18 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
6 SG4O 1
CTAM 1
65
COMO 5
66
SG4O 1
CTAM 1
67
COMO 5
68
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 19 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
7
SG2O 1
NADM 1
69
SG3O 1
RFFM 1
70
SG2O 1
NADM 1
71
LOCO 1
72
SG3O 1
RFFM 1
73
SG4O 1
CTAM 1
74
COMO 5
75
SG4O 1
CTAM 1
76
COMO 5
77
SG2O 1
NADM 1
78
SG3O 1
RFFM 1
79
SG4O 1
CTAM 1
80
COMO 5
81
SG4O 1
CTAM 1
82
COMO 5
83
8
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 20 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
8
SG2O 1
NADM 1
84
SG3O 1
RFFM 1
85
SG4O 1
CTAM 1
86
COMO 5
87
SG4O 1
CTAM 1
88
COMO 5
89
SG2O 1
NADM 1
90
SG3O 1
RFFM 1
91
SG4O 1
CTAM 1
92
COMO 5
93
SG4O 1
CTAM 1
94
COMO 5
95
SG2O 1
NADM 1
96
SG2D 1
NADM 1
97
9
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 21 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
9
SG2O 1
NADM 1
98
SG2D 1
NADM 1
99
SG2O 1
NADM 1
100
SG2O 1
NADM 1
101
SG5O 10
TODM 1
102
LOCO 1
103
FTXO 5
104
SG6O 10
TDTM 1
105
PCDO 1
106
SG8O 10
EQDM 1
107
MEAO 1
108
11
10
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 22 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
10
MEAO 1
109
MEAO 1
110
MEAO 1
111
MEAO 1
112
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 23 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
11
SG10M 9999
CPSM 1
113
FTXO 1
114
SG11O 9999
PACM 1
115
MEAO 1
116
MEAO 1
117
MEAO 1
118
MEAO 1
119
MEAO 1
120
QTYO 1
121
QTYO 1
122
14
13
12
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 24 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
12 SG13O 1
PCIM 1
123
RFFD 1
124
SG14O 99
GIRM 1
125
DTMO 1
126
DTMO 1
127
SG15O 99
GINM 1
128
SG15O 1
GINM 1
129
SG15O 1
GINM 1
130
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 25 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
13 SG11Not used 1
PACM 1
131
SG17R 9999
LINM 1
132
PIAR 1
133
PIAO 1
134
PIAO 1
135
IMDO 25
136
MEAO 1
137
QTYD 1
138
QTYR 1
139
15
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 26 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
15
QTYO 1
140
QTYO 1
141
QTYO 1
142
QTYO 1
143
ALIO 1
144
GINO 100
145
GINO 100
146
GINO 100
147
16
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 27 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
16
DTMO 1
148
DTMO 1
149
DTMO 1
150
DTMO 1
151
DTMO 1
152
DTMO 1
153
DTMO 1
154
NADO 1
155
17
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 28 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
17
FTXO 1
156
FTXO 99
157
MOAO 1
158
SG18O 1
RFFM 1
159
DTMO 1
160
SG18O 5
RFFM 1
161
CTAO 1
162
DTMO 1
163
SG18R 1
RFFM 1
164
DTMO 1
165
SG18O 99
RFFM 1
166
DTMO 1
167
18
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 29 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
18 SG19O 1
DGSM 1
168
FTXO 1
169
FTXO 1
170
SG20O 1
LOCM 1
171
SG20O 1
LOCM 1
172
SG20O 1
LOCM 1
173
SG22O 1
PCIM 1
174
QTYO 1
175
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 30 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
14
SG10O 1
CPSM 1
176
SG11R 1
PACM 1
177
MEAO 1
178
MEAO 1
179
MEAO 1
180
MEAO 1
181
MEAO 1
182
QTYO 1
183
QTYO 1
184
SG13O 1
PCIM 1
185
RFFO 1
186
21
20
19
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 31 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
19
DTMO 1
187
DTMO 1
188
DTMO 1
189
DTMO 1
190
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 32 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
20 SG13M 1000
PCIM 1
191
SG15D 1
GINM 1
192
SG15R 98
GINM 1
193
SG16O 1
CODM 1
194
MEAO 1
195
MEAO 1
196
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 33 /Generated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/groupSt MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
21
SG10O 9999
CPSM 1
197
SG11O 9999
PACM 1
198
UNTM 1
199
UNZM 1
200
GLOBAL DESADV
Segments
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 34 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
UNB M 1 Interchange header
EDIFACT ContiTag Name St Format St Format Usage / RemarkS001 Syntax identifier M M0001 Syntax identifier M a4 M a4 UNOA UN/ECE level A
UNOB UN/ECE level BUNOC UN/ECE level CUNOX UN/ECE level X
0002 Syntax version number M n1 M n1 2 Version 23 Version 3
S002 Interchange sender M M0004 Sender identification M an..35 M an..350007 Partner identification code
qualifierC an..4 C an..4
0008 Address for reverse routing C an..14 C an..14S003 Interchange recipient M M0010 Recipient identification M an..35 M an..350007 Partner identification code
qualifierC an..4 C an..4
0014 Routing address C an..14 C an..14S004 Date/time of preparation M M0017 Date of preparation M n6 M n60019 Time of preparation M n4 M n4
0020 Interchange control reference M an..14 M an..14S005 Recipient's reference,
passwordC C
0022 Recipient's reference/password M an..14 M an..140025 Recipient's reference/password
qualifieran2 N Not used
0026 Application reference C an..14 C an..140029 Processing priority code C a1 C a10031 Acknowledgement request C n1 C n10032 Communications agreement ID C an..35 C an..350035 Test indicator C n1 C n1
Remark:
Example: UNB+UNOC:3+X:1:X+X:1:X+080617:1009+X+X+X+A+1+X+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 35 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
UNH M 1 Message header
EDIFACT ContiTag Name St Format St Format Usage / Remark0062 Message reference number M an..14 M an..14 Message reference number S009 Message identifier M M0065 Message type M an..6 M an..6 DESADV Despatch advice message0052 Message version number M an..3 M an..3 D Draft version/UN/EDIFACT Directory0054 Message release number M an..3 M an..3 07A Release 2007 - A0051 Controlling agency M an..2 M an..2 UN UN/CEFACT0057 Association assigned code C an..6 O an..6 According to national or regional specifications the automotive
association of that region can assign additional codes.0068 Common access reference an..35 N Not usedS010 Status of the transfer N0070 Sequence of transfers n..2 N Not used0073 First and last transfer a1 N Not used
Remark:
Example: UNH+ABC123+DESADV:D:07A:UN:GA0220'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 36 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
BGM M 1 Beginning of message
EDIFACT ContiTag Name St Format St Format Usage / RemarkC002 Document/message name C R1001 Document name code C an..3 R an..3 351 Despatch advice1131 Code list identification code C an..17 D an..173055 Code list responsible agency
codeC an..3 D an..3 10 ODETTE
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
272 Joint Automotive Industry agency1000 Document name C an..35 O an..35
C106 Document/messageidentification
C R
1004 Document identifier C an..35 R an..351056 Version identifier C an..9 O an..91060 Revision identifier C an..6 O an..6
1225 Message function code C an..3 O an..3 1 Cancellation7 Duplicate9 Original4 Change5 Replace
4343 Response type code C an..3 O an..3 AB Message acknowledgementNA No acknowledgement needed
Remark:The document identifier (DE 1004) is also referred to as despatch number. The reference to any other physical document going alongsidewith the goods is referred to as delivery note an can be a reference either on header level or on handling unit level or on article / line itemlevel.
Example: BGM+351:::ABC123+ABC123::1+1+AB'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 37 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM R 1 Despatch advice date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 137 Document issue date time
2380 Date or time or period text C an..12 R an..122379 Date or time or period format
codeC an..3 R an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+137:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 38 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM O 1 Despatch date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 11 Despatch date and or time
2380 Date or time or period text C an..12 R an..122379 Date or time or period format
codeC an..3 R an..3 102 CCYYMMDD
203 CCYYMMDDHHMM304 CCYYMMDDHHMMSSZZZ
Remark:
Example: DTM+11:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 39 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM R 1 Estimated arrival date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 132 Transport means arrival date time, estimated
2380 Date or time or period text C an..12 R an..122379 Date or time or period format
codeC an..3 R an..3 102 CCYYMMDD
203 CCYYMMDDHHMM304 CCYYMMDDHHMMSSZZZ
Remark:
Example: DTM+132:20021202:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 40 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM O 1 Requested delivery date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 2 Delivery date/time, requested
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+2:20021203:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 41 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM O 1 Requested shipment date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 10 Shipment date/time, requested
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+10:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 42 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
DTM O 1 Calculation Date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 257 Calculation date time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:May be used, if data of the despatch advice are used for cost calculation and exchange rate or fees are floating.
Example: DTM+257:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 43 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
ALI O 1 Material Flow Type Coded
EDIFACT ContiTag Name St Format St Format Usage / Remark3239 Country of origin identifier an..3 N Not used9213 Duty regime type code an..3 N Not used4183 Special condition code C an..3 R an..3 66 Delivery without change of ownership
67 Delivery with change of ownership4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used
Remark:
Example: ALI+++67'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 44 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MEA R 1 Consignment's gross weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAX Consignment measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AAD Consignment gross weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..8 The codes of this codelist are documented in a separate
document6314 Measure C n..12 R n..126162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAX+AAD+KGM:1000'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 45 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MEA R 1 Consignment's net weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAX Consignment measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AAL Net weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..8 The codes of this codelist are documented in a separate
document6314 Measure C n..12 R n..126162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAX+AAL+KGM:950'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 46 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MEA O 1 Consignment volume (Total cube)
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAX Consignment measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 ABJ Volume6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..9 R n..96162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAX+ABJ+LTR:345'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 47 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MEA O 1 Consignment's loading meters
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 LMT Loading meters
C502 Measurement details N6313 Measured attribute code an..3 N Not used6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..8 MTR - meter is recommended6314 Measure C n..12 R n..126162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+LMT++MTR:3'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 48 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MEA O 1 Number of handling units in shipment
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAE Measurement
C502 Measurement details C C6313 Measured attribute code an..3 N Not used6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
C an..70 C an..70
C174 Value/range C R6411 Measurement unit code M an..8 M an..8 C62 one6314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAE+:::ABC123+C62:24'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 49 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MOA O 1 Packing cost
EDIFACT ContiTag Name St Format St Format Usage / RemarkC516 Monetary amount M M5025 Monetary amount type code
qualifierM an..3 M an..3 107 Transport equipment total for customs packing
cost amount5004 Monetary amount C n..15 R n..156345 Currency identification code C an..3 R an..36343 Currency type code qualifier an..3 N Not used4405 Status description code an..3 N Not used
Remark:
Example: MOA+107:100:EUR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 50 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MOA O 1 Deductions
EDIFACT ContiTag Name St Format St Format Usage / RemarkC516 Monetary amount M M5025 Monetary amount type code
qualifierM an..3 M an..3 46 Customs allowable deduction basis amount
5004 Monetary amount C n..15 R n..156345 Currency identification code C an..3 R an..36343 Currency type code qualifier an..3 N Not used4405 Status description code an..3 N Not used
Remark:
Example: MOA+46:10:EUR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 51 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MOA O 1 Freight charges
EDIFACT ContiTag Name St Format St Format Usage / RemarkC516 Monetary amount M M5025 Monetary amount type code
qualifierM an..3 M an..3 64 Freight charge
5004 Monetary amount C n..15 R n..156345 Currency identification code C an..3 R an..36343 Currency type code qualifier an..3 N Not used4405 Status description code an..3 N Not used
Remark:
Example: MOA+64:200:USD'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 52 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
MOA O 1 Customs value of the shipment
EDIFACT ContiTag Name St Format St Format Usage / RemarkC516 Monetary amount M M5025 Monetary amount type code
qualifierM an..3 M an..3 40 Goods item for customs declared value amount
5004 Monetary amount C n..35 R n..356345 Currency identification code C an..3 R an..36343 Currency type code qualifier an..3 N Not used4405 Status description code an..3 N Not used
Remark:
Example: MOA+40:200000:EUR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 53 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Transport document reference
RFF M 1 Transport document reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 AAS Transport contract document identifier1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+AAS:TD-2002-101:120'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 54 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Transport document reference
DTM O 1 Reference date (transport document)
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021123:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 55 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Conveyance reference number
RFF M 1 Conveyance reference number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 CRN Transport means journey identifier
CN Carrier's reference numberCRN is used by Odette; CN is used by AIAG.
1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 C an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+CRN:23/22176:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 56 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Conveyance reference number
DTM O 1 Reference date (conveyance )
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C an..35 R an..352379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 57 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Packing list reference
RFF M 1 Packing list reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 PK Packing list number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+PK:PK-20021123-21:3'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 58 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Packing list reference
DTM O 1 Reference date (packing list)
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021130:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 59 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Fiscal note
RFF M 1 Fiscal note
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ARG Registro Informacion Fiscal (RIF) number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ARG:12345:010'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 60 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Fiscal note
DTM O 1 Reference date (fiscal note)
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 61 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Shipment / delivery note reference
RFF M 1 Shipment / delivery note reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 AAU Despatch note document identifier1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+AAU:12345'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 62 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 1 Shipment / delivery note reference
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 63 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Air waybill number
The total number of references (SG1) shall not exceed 10 occurrences.
RFF M 1 Air waybill number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 R an..3 AWB Air waybill number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:The maximum occurence of this segment group, giving a reference to a message, is reduced when the qualified documents listed beforeare transmitted as well. The maximum repetition of the SG1-RFF segment is 10 times in total.
Example: RFF+AWB:12345:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 64 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Air waybill number
The total number of references (SG1) shall not exceed 10 occurrences.
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021001:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 65 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Bill of lading number
The total number of references (SG1) shall not exceed 10 occurrences.
RFF M 1 Bill of lading number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 R an..3 BM Bill of lading number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:The maximum occurence of this segment group, giving a reference to a message, is reduced when the qualified documents listed beforeare transmitted as well. The maximum repetition of the SG1-RFF segment is 10 times in total.
Example: RFF+BM:12345:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 66 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Bill of lading number
The total number of references (SG1) shall not exceed 10 occurrences.
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021001:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 67 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Waybill number
The total number of references (SG1) shall not exceed 10 occurrences.
RFF M 1 Waybill number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 R an..3 AAM Waybill number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:The maximum occurence of this segment group, giving a reference to a message, is reduced when the qualified documents listed beforeare transmitted as well. The maximum repetition of the SG1-RFF segment is 10 times in total.
Example: RFF+AAM:12345:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 68 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Waybill number
The total number of references (SG1) shall not exceed 10 occurrences.
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021001:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 69 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Reference to messages
The total number of references (SG1) shall not exceed 10 occurrences.
RFF M 1 Reference to messages
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 R an..3 Document Type Coded - use code list 1153
The codes of this codelist are documented in a separatedocument
1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:The maximum occurence of this segment group, giving a reference to a message, is reduced when the qualified documents listed beforeare transmitted as well. The maximum repetition of the SG1-RFF segment is 10 times in total.
Example: RFF+AAA:ABC123:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 70 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG1 O 99 Reference to messages
The total number of references (SG1) shall not exceed 10 occurrences.
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021001:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 71 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Ship to
NAD M 1 Ship to's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 ST Ship toC082 Party identification details C R3039 Party identifier M an..20 R an..201131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..353036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 C an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2 The codes of this codelist are documented in a separate
document
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+ST+33::5'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 72 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Ship to
LOC O 1 Place of discharge
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 11 Place of dischargeC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+11+W0001'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 73 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Ship to
LOC O 1 Internal place of destination
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 7 Place of delivery
18 Warehouse229 Inspection site
C517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+18+Stock1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 74 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Ship to's reference (account) number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:CN998877'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 75 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 ShipTo's information contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..35 O an..35
Remark:
Example: CTA+IC+:Arthur Miller'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 76 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication means
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+001 637 2134 5543:FX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 77 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Buyer
NAD M 1 Buyer's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 BY BuyerC082 Party identification details C R3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C an..3 O an..3
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+BY'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 78 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Buyer
LOC O 1 Delivery location (place of discharge)
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 11 Place of dischargeC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:It is recommended to use a separate ship-to party in order to transmit the delivery location and the internal place of destination.
Example: LOC+11+GATE 15:::Gate 15'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 79 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 R 1 Buyer
LOC O 1 Internal place of destination
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 7 Place of delivery
18 Warehouse229 Inspection site
C517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:It is recommended to use a separate ship-to party in order to transmit the delivery location and the internal place of destination.
Example: LOC+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 80 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:CN998877'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 81 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 VAT number
RFF M 1 VAT number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 VA VAT registration number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+VA:DE 88776655'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 82 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+IC+:Arthur Miller'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 83 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+0049 637 2134 5543:FX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 84 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Material release issuer
NAD M 1 Material release issuer's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 MI Planning schedule/material release issuerC082 Party identification details C R3039 Party identifier M an..20 R an..201131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+MI'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 85 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Information contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+IC'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 86 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 87 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Ultimate Customer
NAD M 1 Ultimate customers's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 UD Ultimate customerC082 Party identification details C R3039 Party identifier M an..20 M an..201131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:The ultimate customer is the final recipient of the goods. In a multi-tier scheduled shipment it might be necessary to distinguish betweenthe ship-from (e.g. tier 2) , the ship-to (e.g. tier 1) and the ultimate customer (e.g. OEM's plant or car dealer).
Example: NAD+UD'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 88 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Ultimate Customer
LOC O 1 Place of discharge
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 11 Place of dischargeC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+11'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 89 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Ultimate Customer
LOC O 1 Internal place of destination
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 7 Place of delivery
18 Warehouse229 Inspection site
C517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+++X:::X+X:::X'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 90 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..35 O an..35
Remark:
Example: CTA+IC'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 91 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 92 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 D 2 Seller / Supplier
NAD M 1 Seller's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 SU SupplierC082 Party identification details C R3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+SU+100-98654::92'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 93 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 D 2 Seller / Supplier
LOC O 1 Shipping location / place of loading
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 5 Place of departureC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+5'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 94 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:CN998877'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 95 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 VAT registration number
RFF M 1 VAT registration number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 VA VAT registration number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+VA:NL 33224422'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 96 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information Contact
CTA M 1 Information Contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..35 O an..35
Remark:
Example: CTA+IC+:Hans Hansen'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 97 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information Contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+0031 637 2134 5543:FX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 98 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Accounting contact
CTA M 1 Accounting contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 AD Accounting contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+AD'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 99 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Accounting contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 100 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Sales contact
CTA M 1 Contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 SR Sales representative or departmentC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+SR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 101 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Sales contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 102 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Carrier
NAD M 1 Carrier's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 CA CarrierC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3124 # 1 3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C an..3 O an..3
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+CA'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 103 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:12587'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 104 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Ship from
NAD M 1 Ship from's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 SF Ship fromC082 Party identification details C O3039 Party identifier M an..20 R an..201131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+SF'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 105 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Ship from
LOC O 1 Shipping location/ Place of loading
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 9 Place of loadingC517 Location identification C R3225 Location identifier C an..17 R an..171131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:
Example: LOC+9'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 106 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:36962'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 107 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Expedition contact
CTA M 1 Expedition contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 EX ExpeditorC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+EX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 108 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Expedition contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 109 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Information contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name an..256 N Not used
Remark:
Example: CTA+IC+G777'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 110 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..17 R an..17 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+9987654:TE'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 111 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Freight forwarder
NAD M 1 Freight forwarder's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 FW Freight forwarderC082 Party identification details C O3039 Party identifier M an..35 R an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..35 Freight Forwarder's Address Line 1 3124 Name and address description C an..35 O an..35 Freight Forwarder's Address Line 2
see 3124 # 1 3124 Name and address description C an..35 O an..35 Freight Forwarder's Address Line 3
see 3124 # 1 3124 Name and address description C an..35 O an..35 Freight Forwarder's Address Line 4
see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
Freight Forwarder's Address Line 5C080 Party name C O3036 Party name M an..35 M an..35 Freight Forwarder's Name 3036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 112 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Example: NAD+FW'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 113 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account code
RFF M 1 Internal account code
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..17 R an..17 Freight Forwarder's Internal Account Number 1156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:36962'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 114 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Information contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..35 O an..35
Remark:
Example: CTA+IC+:H. Friday'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 115 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+099 1235 5522 888:FX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 116 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
CTA M 1 Notification contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 NT Notification contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+NT'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 117 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 118 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Transport Consolidation Center
NAD M 1 Transport Consolidation Center
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 FZ Grouping centreC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C C3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+FZ'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 119 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..17 R an..171156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:36962'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 120 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Information contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..35 O an..35
Remark:
Example: CTA+IC'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 121 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 122 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
CTA M 1 Notification contact
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 NT Notification contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+NT'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 123 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 124 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Manufacturer
NAD M 1 Manufacturer's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 MF Manufacturer of goodsC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 O an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C an..3 O an..3
Remark:A message contains either only the manufacturer or the shikyu-moto.In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+MF'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 125 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG3 O 1 Internal account number
RFF M 1 Internal account number
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ADE Account number1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ADE:36962'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 126 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
CTA M 1 Contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 IC Information contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+IC'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 127 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Information contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 128 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
CTA M 1 Contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 NT Notification contactC056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+NT'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 129 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG4 O 1 Notification contact
COM O 5 Communication contact
EDIFACT ContiTag Name St Format St Format Usage / RemarkC076 Communication contact M M3148 Communication address
identifierM an..512 M an..512 Communication number / address. Each communication
number has to be qualified with the corresponding code in DE3155.
3155 Communication means typecode
M an..3 M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 130 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Shikyu-moto
NAD M 1 Shikyu-moto's name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 HM Alternative manufacturerC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.A message contains either only the manufacturer or the shikyu-moto.
Example: NAD+HM'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 131 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 D 1 Message Sender
NAD M 1 Message Sender
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 MS Document/message issuer/senderC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address N3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used
C080 Party name N3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street N3042 Street and number or post
office box identifieran..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name an..35 N Not usedC819 Country subdivision details N3229 Country subdivision identifier an..9 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code an..17 N Not used3207 Country identifier an..3 N Not used
Remark:This segment is used in the empty container management scenario. There, the sender and receiver of the message may differ from ship-from and ship-to, who sends / receives the physical goods.
Example: NAD+MS'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 132 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Message Recipient
NAD M 1 Message Recipient name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 MR Message recipientC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address N3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used3124 Name and address description an..35 N Not used
C080 Party name N3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street N3042 Street and number or post
office box identifieran..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name an..35 N Not usedC819 Country subdivision details N3229 Country subdivision identifier an..9 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code an..17 N Not used3207 Country identifier an..3 N Not used
Remark:A message contains Message Recipient.This segment is used in the empty container management scenario. There, the sender and receiver of the message may differ from ship-from and ship-to, who sends / receives the ohysical goods.
Example: NAD+MR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 133 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 D 1 Consignor
NAD M 1 Consignor name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 CZ ConsignorC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:This segment is used in the empty container management scenario. There, it might be necessary to identify the consignor (who is orderingthe transport) and this party may differ from ship-from.
Example: NAD+CZ'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 134 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Empty equipment receiving party (Ship to's plant)
NAD M 1 Empty equipment receiving party (Ship to's plant)
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 DP Delivery partyC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C C3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:This segment is used in the empty container management scenario. In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+DP++::::X'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 135 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG2 O 1 Empty Equipment Despatch Party (Ship from's plant)
NAD M 1 Empty Equipment Despatch Party name and address
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 CK Empty equipment despatch partyC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C O3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1 3124 Name and address description C an..35 O an..35 see 3124 # 1
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 R an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C a2 O a2
Remark:This segment is used in the empty container management scenario. In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+CK'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 136 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG5 O 10 Terms of delivery
TOD M 1 Terms of delivery or transport
EDIFACT ContiTag Name St Format St Format Usage / Remark4055 Delivery or transport terms
function codeC an..3 C an..3
4215 Transport charges paymentmethod code
C an..3 O an..3
C100 Terms of delivery or transport C O4053 Delivery or transport terms
description codeC an..3 R an..3
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
4052 Delivery or transport termsdescription
an..70 N Not used
4052 Delivery or transport termsdescription
an..70 N Not used
Remark:
Example: TOD+1+A+FOB'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 137 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG5 O 10 Terms of delivery
LOC O 1 Incoterms place
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 1 Place of terms of deliveryC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationN
3223 First related location identifier an..35 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3222 First related location name an..70 N Not usedC553 Related location two
identificationN
3233 Second related locationidentifier
an..35 N Not used
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3232 Second related location name an..70 N Not used5479 Relation code an..3 N Not used
Remark:Identification of the point or port of departure, shipment or destination as required under the applicable incoterms.
Example: LOC+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 138 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG5 O 10 Terms of delivery
FTX O 5 Terms of delivery - descriptive text
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 AAR Terms of delivery4453 Free text function code an..3 N Not usedC107 Text reference N4441 Free text description code an..17 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C108 Text literal C R4440 Free text M an..512 R an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..512
3453 Language name code C an..3 O an..34447 Free text format code an..3 N Not used
Remark:
Example: FTX+AAR++++AA'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 139 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG6 O 10 Means of transport
TDT M 1 Means of transport
EDIFACT ContiTag Name St Format St Format Usage / Remark8051 Transport stage code qualifier M an..3 M an..3 12 At departure
Identification of the point or port of departure, shipment ordestination as required under the applicable incoterms.
8028 Means of transport journeyidentifier
C an..17 O an..17
C220 Mode of transport C O8067 Transport mode name code C an..3 O an..3 00 This code should be avoided since the digit "0"
conventionally10 Maritime transport12 A railway wagon on a vessel at sea20 Rail transport23 Trailers or road vehicles being transported by
rail30 Road transport40 Air transport50 Mail60 Multimodal transport70 Fixed transport installations80 Inland water transport
Code specifying the name of a mode of transport. Use UN/ECERecommendation No 19.
8066 Transport mode name an..17 N Not usedC001 Transport means C O8179 Transport means description
codeC an..8 O an..8 1 Barge chemical tanker
2 Coaster chemical tanker3 Dry bulk carrier4 Deep sea chemical tanker5 Gas tanker6 Aircraft9 Exceptional transport
11 Ship12 Ship tanker13 Ocean vessel21 Rail tanker22 Rail silo tanker23 Rail bulk car24 Customer rail tanker25 Rail express31 Truck32 Truck, tanker33 Tractor35 Tiptanker36 Truck, dry bulk37 Truck, container
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
8178 Transport means description an..17 N Not usedC040 Carrier C O3127 Frachtfüherer nummer C an..17 R an..171131 Code list identification code an..17 N Not used3055 Code list responsible agency C an..3 O an..3
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 140 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
EDIFACT ContiTag Name St Format St Format Usage / Remark
code3126 Carrier name an..35 N Not used
8101 Transit direction indicator code an..3 N Not usedC401 Excess transportation
informationC O
8457 Excess transportation reasoncode
M an..3 M an..3
8459 Excess transportationresponsibility code
M an..3 M an..3
7130 Customer shipmentauthorisation identifier
an..17 N Not used
C222 Transport identification C O8213 Transport means identification
name identifierC an..35 O an..35 Identifier of a means of transport, like license plate etc.
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
8212 Transport means identificationname
C an..17 O an..17
8453 Transport means nationalitycode
C a2 D a2 Provides the country using a code. Use ISO3166 two alpha code.
8281 Transport means ownershipindicator code
C an..2 D an..2 1 Transport for the owner's account2 Transport for another account
Code indicating the ownership of a means of transport.
Remark:
Example: TDT+12+123+10+11+ABC123::185++G:A+ABC123::5:ABC123: DE+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 141 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG6 O 10 Means of transport
PCD O 1 Capacity usage
EDIFACT ContiTag Name St Format St Format Usage / RemarkC501 Percentage details M M5245 Percentage type code qualifier M an..3 M an..3 36 Volume capacity usage5482 Percentage C n..4 R n..45249 Percentage basis identification
codean..3 N Not used
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
4405 Status description code an..3 N Not used
Remark:
Example: PCD+36'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 142 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
EQD M 1 Equipment details
EDIFACT ContiTag Name St Format St Format Usage / Remark8053 Equipment type code qualifier M an..3 M an..3 AE Body trailer
CN ContainerRR Rail carSW Swap bodyTE Trailer
C237 Equipment identification C C8260 Equipment identifier C an..17 O an..171131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3207 Country identifier an..3 N Not usedC224 Equipment size and type N8155 Equipment size and type
description codean..10 N Not used
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
8154 Equipment size and typedescription
an..35 N Not used
8077 Equipment supplier code an..3 N Not used8249 Equipment status code an..3 N Not used8169 Full or empty indicator code an..3 N Not used4233 Marking instructions code an..3 N Not used
Remark:
Example: EQD+CN+12345'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 143 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
MEA O 1 Length
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C C6313 Measured attribute code C an..3 R an..3 LN Length6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 C an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+LN+FOT:20'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 144 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
MEA O 1 Width
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C C6313 Measured attribute code C an..3 R an..3 WD Width dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..11 O n..116162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+WD+FOT:20'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 145 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
MEA O 1 Hight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C C6313 Measured attribute code C an..3 R an..3 HT Height dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..3 M an..36314 Measure C n..11 O n..116162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+HT+FOT:20'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 146 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
MEA O 1 Gross weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C C6313 Measured attribute code C an..3 R an..3 G Gross weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..11 O n..116162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+G+KGM:1000'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 147 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG8 O 10 Equipment
MEA O 1 Net weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AAL Net weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..3 R an..36314 Measure C n..11 R n..116162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+AAL+KGM:950'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 148 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG10 M 9999 Despatch control line / group of inner packaging it ems and article line
CPS M 1 Consignment packing sequence
EDIFACT ContiTag Name St Format St Format Usage / Remark7164 Hierarchical structure level
identifierM n..6 R n..6 Line Number
7166 Hierarchical structure parentidentifier
C an..35 O an..35
7075 Packaging level code C an..3 R an..3 1 Inner4 No packaging hierarchy
If Code 4 is used, no parent relationship exists (simplifiedhandling unit concept).
Remark:The hierarchical structure of the message has to be created by a proper combination of values in DE 7164 (line number) and 7166 (parentline number). There is no default article driven or package driven logic. Therefore, the message can be used for every variant of thebusiness process.Business partners using this message should specify mutually the implementation profile in order to simplify the usage. The values of this Line Number shall not duplicate other occurrences of the CPS.
Example: CPS+10+1+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 149 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG10 M 9999 Despatch control line / group of inner packaging it ems and article line
FTX O 1 Free text
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 AAI General information4453 Free text function code an..3 N Not usedC107 Text reference C C4441 Free text description code an..17 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C108 Text literal C R4440 Free text M an..70 M an..70 Free Text (Line 1) 4440 Free text C an..70 O an..70 Free Text (Line 2) 4440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..512
3453 Language name code C an..3 C an..34447 Free text format code an..3 N Not used
Remark:This free text has to be transmitted attached to the first occurrence of the CPS segment in the message.
Example: FTX+AAI'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 150 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
PAC M 1 Package
EDIFACT ContiTag Name St Format St Format Usage / Remark7224 Package quantity C n..6 O n..6C531 Packaging details C C7075 Packaging level code C an..3 C an..37233 Packaging related description
codeC an..3 R an..3 35 Type of package
7073 Packaging terms andconditions code
C an..3 O an..3 1 Packaging cost paid by supplier2 Packaging cost paid by recipient
11 Multiple usage buyer's durable12 Multiple usage seller's durable
Codes 1 and 2 indicate non-returnable packaging.C202 Package type C R7065 Package type description code C an..17 R an..17 Codes defining packagings based on designations by
organisations or parties specified in DE 3055.1131 Code list identification code C an..17 C an..173055 Code list responsible agency
codeC an..3 O an..3 Code List Responsible Agency
10 ODETTE91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
204 DE, VDA (Verband der Automobilindustrie E.V.)ZZZ Mutually defined
7064 Type of packages an..35 N Not usedC402 Package type identification C C7077 Description format code M an..3 M an..3 F Free-form7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used
C532 Returnable package details C O8395 Returnable package freight
payment responsibility codean..3 N Not used
8393 Returnable package loadcontents code
C an..3 R an..3 11 Empty container, folded
Remark:The number of packages corresponds to the total number of packages of the same type (given in data element 7065). They may be in oneor more handling units.
Example: PAC+5+:35:11+BE::92+F+:11'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 151 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
MEA O 1 Gross weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAY Package measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 G Gross weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAY+G+KGM:1000'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 152 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
MEA O 1 Net weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAY Package measurement
C502 Measurement details C R6313 Measured attribute code C an..3 O an..3 AAL Net weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAY+AAL+KGM:990'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 153 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
MEA O 1 Length
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAY Package measurement
C502 Measurement details C R6313 Measured attribute code C an..3 O an..3 LN Length6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..5 R n..56162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAY+LN+CMT:100'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 154 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
MEA O 1 Width
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAY Package measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 WD Width dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAY+WD+CMT:100'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 155 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
MEA O 1 Height
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAY Package measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 HT Height dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAY+HT+CMT:100'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 156 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
QTY O 1 Actual quantity per package
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 52 Quantity per pack6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:Mapping commentsIn case of single article packages (common situation) this is the number of article in each package.In case of multi-article packages, this value represents the number of sets of articles per package.
To compute the total number of parts per package, (Total), use the following formula:Tot = CPS(1).PAC.QTY(52)_6060 (number of sets per package)_* CPS(1).LIN.QTY(1)_6060 (number of 1st article per set)_+ CPS(1).PAC.QTY(52)_6060 (number of sets per package)_* CPS(1).LIN.QTY(1)_6060 (number of 2nd article per set)_+ etc. (as many times as there are sets components).
Example: QTY+52:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 157 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Group of inner packaging items
The number of SG 11 in a group of inner packaging items shall not exceed 9999.
QTY O 1 Maximum stackability
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 171 Maximum stackability6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+171:3:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 158 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Individual packaging item
PCI M 1 Package identification
EDIFACT ContiTag Name St Format St Format Usage / Remark4233 Marking instructions code C an..3 R an..3 17 Seller's instructionsC210 Marks & labels C R7102 Shipping marks description M an..35 M an..357102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used
8169 Full or empty indicator code an..3 N Not usedC827 Type of marking C O7511 Label identifier coded M an..3 M an..3 Handling Unit Category 1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE
167 US, AIAG (Automotive Industry Action Group)
Remark:The data element 4233 should contain the constant value "17" (=Seller's instruction) to avoid the transmission of an empty segment whenthe Label identifier is not transmitted.
Example: PCI+17+455485++1J::5'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 159 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Individual packaging item
RFF D 1 Reference to outer package
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ACI Outerpackaging unit identification1154 Reference identifier C an..70 R an..701156 Document line identifier an..6 N Not used1056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:Mandatory if M-Label exists
Example: RFF+ACI:#443'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 160 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG14 O 99 Production batch
GIR M 1 Trigger segment
EDIFACT ContiTag Name St Format St Format Usage / Remark7297 Set type code qualifier M an..3 M an..3 1 ProductC206 Identification number M M7402 Object identifier M an..35 M an..357405 Object identification code
qualifierC an..3 O an..3 AN Manufacturing reference number
BX Batch number4405 Status description code an..3 N Not used
C206 Identification number N7402 Object identifier an..35 N Not used7405 Object identification code
qualifieran..3 N Not used
4405 Status description code an..3 N Not usedC206 Identification number N7402 Object identifier an..35 N Not used7405 Object identification code
qualifieran..3 N Not used
4405 Status description code an..3 N Not usedC206 Identification number N7402 Object identifier an..35 N Not used7405 Object identification code
qualifieran..3 N Not used
4405 Status description code an..3 N Not usedC206 Identification number N7402 Object identifier an..35 N Not used7405 Object identification code
qualifieran..3 N Not used
4405 Status description code an..3 N Not used
Remark:It should be noted that production batch related information can only be attached to a single individual packaging item because thepackages of a range may be from different production batches.
Example: GIR+1+:BX'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 161 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG14 O 99 Production batch
DTM O 1 Production date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 94 Production/manufacture date
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+94'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 162 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG14 O 99 Production batch
DTM O 1 Last use date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 36 Expiry date
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+36'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 163 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG15 O 99 Label number(s)
the total number of SG15 in a SG 13 shall not exceed 99 times.Mandatory if packaging-information is enclosed
GIN M 1 Label serial number(s)
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 ML Marking/label number
Identity Number Type C208 Identity number range M M7402 Object identifier M an..35 R an..357402 Object identifier C an..35 O an..35 Last (serial) label ID of a range of consecutive labels.
C208 Identity number range C O7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
Remark:
Example: GIN+ML+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 164 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG15 O 1 Kanban card number
the total number of SG15 in a SG 13 shall not exceed 99 times.
GIN M 1 Kanban card number
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 AL Kanban card identifier
C208 Identity number range M M7402 Object identifier M an..35 M an..357402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
Remark:
Example: GIN+AL'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 165 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG15 O 1 Buyer's package ID
the total number of SG15 in a SG 13 shall not exceed 99 times.
GIN M 1 Goods identity number
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 BU Package buyer assigned identifier
C208 Identity number range M M7402 Object identifier M an..35 M an..357402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
Remark:
Example: GIN+BU'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 166 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 Not used 1 Packaging aid
PAC M 1 Package
EDIFACT ContiTag Name St Format St Format Usage / Remark7224 Package quantity C n..6 O n..6C531 Packaging details C R7075 Packaging level code an..3 N Not used7233 Packaging related description
codeC an..3 R an..3 37 Package protection
7073 Packaging terms andconditions code
C an..3 O an..3 Applicable codes have to be defined between the businesspartners.
C202 Package type C R7065 Package type description code C an..17 R an..17 Codes defining packaging classes based on designations by
organisations or parties specified in DE 3055.1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3 10 ODETTE
91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
204 DE, VDA (Verband der Automobilindustrie E.V.)ZZZ Mutually defined
7064 Type of packages an..35 N Not usedC402 Package type identification N7077 Description format code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used
C532 Returnable package details N8395 Returnable package freight
payment responsibility codean..3 N Not used
8393 Returnable package loadcontents code
an..3 N Not used
Remark:
Example: PAC+1+:37:7+CODE::10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 167 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
LIN M 1 Line item
EDIFACT ContiTag Name St Format St Format Usage / Remark1082 Line item identifier C an..6 R an..61229 Action code an..3 N Not usedC212 Item number identification C R7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 IN Buyer's item number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C829 Sub-line information N5495 Sub-line indicator code an..3 N Not used1082 Line item identifier an..6 N Not used
1222 Configuration level number C n..2 O n..2 Configuration Level Data element 1222 is not a coded data element. Neverthelessa codelist (JAI031) has been attached to give the only validlevel values.
7083 Configuration operation code an..3 N Not used
Remark:In case of single-article packages, the Configuration Level (data element 1222) is set to zero. In this case, there is only one LIN segmentper Article Line (for the unique Despatched Article).In case of multi-article packages, a specific occurrence of the LIN segment group identified by value 1 in data element 1222 is used totransmit the information related to the set of articles. Because a set of articles is not identified by a part number, data elements 7140 &7143 are not used in those occurrences of LIN. Each despatched article of a set is described by its own LIN segment group occurrence,identified by value 2 in data element 1222.A single article Article Line may be transmitted using the multi-article packages logic: - 1 occurrence of LIN with data element 1222 set tovalue 1; - 1 occurrence of LIN with data element 1222 set to value 2.In order to avoid a too complicated structure of the despatch message it is strongly recommended to assign an individual article number tothe set (e.g. left and right headlamps) and use the single article logic.
Example: LIN+1++ABC123:IN++0'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 168 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
PIA R 1 Additional product id
EDIFACT ContiTag Name St Format St Format Usage / Remark4347 Product identifier code qualifier M an..3 R an..3 1 Additional identificationC212 Supplier's article number M M7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 SA Supplier's article number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Drawing/design revisionnumber
C O
7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 DR Drawing revision number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Engineering Change Number C O7140 Item identifier C an..35 R an..35 Engineering Change Number 7143 Item type identification code C an..3 R an..3 EC Engineering change level1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 General specification number C O7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 GS General specification number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Colour number C O7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 CL Colour number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
Remark:The seqence of C212 in PIA segments qualified with '1' is free. The first occurence of C212 has to be filled.
Example: PIA+1+76543:SA+76543:DR+76543:EC+76543:GS+76543:CL'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 169 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
PIA O 1 Additional product id
EDIFACT ContiTag Name St Format St Format Usage / Remark4347 Product identifier code qualifier M an..3 M an..3 1 Additional identificationC212 Ultimate customers item
numberM M
7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 UA Ultimate customer's article number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Service parts identifier C O7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 MP Product/service identification number1131 Code list identification code C an..17 C an..173055 Code list responsible agency
codeC an..3 O an..3
C212 Buyer's internal product groupcode
C C
7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 GB Buyer's internal product group code1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Item number identification N7140 Item identifier an..35 N Not used7143 Item type identification code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Item number identification N7140 Item identifier an..35 N Not used7143 Item type identification code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
Remark:
Example: PIA+1+76543:UA+76543:MP::92+76543:GB'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 170 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
PIA O 1 Superseded item number and quality control code
EDIFACT ContiTag Name St Format St Format Usage / Remark4347 Product identifier code qualifier M an..3 M an..3 4 Substituted forC212 Superseded item number M M7140 Item identifier C an..35 R an..357143 Item type identification code C an..3 R an..3 SA Supplier's article number1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Quality control indicator C O7140 Item identifier C an..35 R an..35 Applicable values have to be agreed upon mutually.
Examples: O = ordinary, A = very criticalB = critical and so on
7143 Item type identification code an..3 N Not used1131 Code list identification code C an..17 R an..17 1893055 Code list responsible agency
codean..3 N Not used
C212 Item number identification N7140 Item identifier an..35 N Not used7143 Item type identification code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Item number identification N7140 Item identifier an..35 N Not used7143 Item type identification code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C212 Item number identification N7140 Item identifier an..35 N Not used7143 Item type identification code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
Remark:
Example: PIA+4+76543:SA+76543'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 171 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
IMD O 25 Item description
EDIFACT ContiTag Name St Format St Format Usage / Remark7077 Description format code C an..3 O an..3 F Free-form
S Structured (from industry code list)C272 Item characteristic C O7081 Item characteristic code C an..3 R an..3 8 Product
32 Type of test/inspection61 New article62 Obsolete article63 Current article66 Current article spares79 Other physical description
116 Corrosion resistance1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3 90 Assigned by manufacturer
91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
290 JP, JAMAC273 Item description C O7009 Item description code C an..17 O an..171131 Code list identification code C an..17 D an..17 55 Industry identification
56 Reference Table Identification3055 Code list responsible agency
codeC an..3 D an..3 10 ODETTE
272 Joint Automotive Industry agency7008 Item description C an..35 O an..35 Article Description (Line 1) 7008 Item description C an..35 O an..35 Article Description (Line 2) 3453 Language name code C an..3 O an..3
7383 Surface or layer code an..3 N Not used
Remark:
Example: IMD+++01::10:XYZ iron mount::AA'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 172 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
MEA O 1 Net weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 PD Physical dimensions (product ordered)
C502 Measurement details C R6313 Measured attribute code C an..3 O an..3 Constant Identifying A Net Weight Dimension
AAL Net weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..3 R an..3 Article Weight Measure Unit Specifier 6314 Measure C n..11 R n..11 Net Weight 6162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+PD+AAL+KGM:10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 173 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY D 1 Quantity per set
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 1 Discrete quantity6060 Quantity M n..6 M n..6 Quantity Per Set of Articles 6411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+1:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 174 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY R 1 Despatched quantity
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 12 Despatch quantity6060 Quantity M n..10 M n..10 Quantity actually despatched 6411 Measurement unit code C an..3 R an..3 Quantity (to be) Despatched Measure Unit Specifier
Remark:
Example: QTY+12:50:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 175 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY O 1 Quantity ordered
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 21 Ordered quantity6060 Quantity M n..10 M n..10 Invoice Quantity 6411 Measurement unit code C an..3 O an..3
Remark:
Example: QTY+21:50:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 176 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY O 1 Quantity to be delivered
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 113 Quantity to be delivered6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+113:50:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 177 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY O 1 Quantity short shipped
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 119 Short shipped6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+119:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 178 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
QTY O 1 Capacity quantity per package
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 X01 Capacity per pack6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+X01:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 179 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
ALI O 1 Country of origin, duty regime and nature of transa ction
EDIFACT ContiTag Name St Format St Format Usage / Remark3239 Country of origin identifier C a2 O a2 a Country Of Origin Coded 9213 Duty regime type code C an..3 O an..3 a.Type Of Duty Regime Coded
1 Origin subject to EC/EFTA preference2 Origin subject to other preference agreement3 No preference origin
4183 Special condition code C an..3 D an..3 Nature Of Transaction Coded 7 Subject to commission
35 Consigned to70 Supply for sale 'on approval' or after trial71 Exchange of goods compensated in kind72 Sale for export by foreigner travelling in
member state concerned73 Samples74 Temporary export, loan or hire75 Temporary export, leasing76 Temporary export, operation for job processing77 Temporary export, repair and maintenance
against payment78 Temporary export, repair and maintenance free
of charge79 Reimport following job processing80 Reimport following repair and maintenance
against payment81 Reimport following repair and maintenance free
of charge82 Supply of goods under joint production contract
for defence purposes83 Supply of goods under joint production contract
for civil purposes84 Supply of goods for warehousing for foreign
account85 Supply of goods as gifts by country of despatch
and food aid under European EconomicCommunity regulation
86 Supply of goods for disaster relief equipment87 Supply of goods as transactions without
compensation88 Supply of goods as returned consignment on
which payment has been made89 Supply of goods as returned consignment on
which no payment has been made90 Supply of goods in standard exchange giving
rise to payment91 Supply of goods in standard exchange not
giving rise to payment92 Supply of goods/services in standard exchange
under warranty4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used4183 Special condition code an..3 N Not used
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 180 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Remark:
Example: ALI+SE+1+73'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 181 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
GIN O 100 Serial Number(s)
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 Identity Number Type
BN Serial numberC208 Identity number range M M7402 Object identifier M an..35 M an..35 Identity Number 7402 Object identifier C an..35 O an..35 Identity Number
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
Remark:All GIN Segments in one SG17 shall not exceed 100 occurrences.
Example: GIN+BN+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 182 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
GIN O 100 Engine Number(s)
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 EE Engine number
C208 Identity number range M M7402 Object identifier M an..35 M an..35 Identity Number 7402 Object identifier C an..35 O an..35 Identity Number
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
Remark:All GIN Segments in one SG17 shall not exceed 100 occurrences.
Example: GIN+EE+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 183 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
GIN O 100 Vehicle Identity Number(s)
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 Identity Number Type
VV Vehicle identity numberC208 Identity number range M M7402 Object identifier M an..35 M an..35 Identity Number 7402 Object identifier C an..35 O an..35 Identity Number
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further identity numbers7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
Remark:All GIN Segments in one SG17 shall not exceed 100 occurrences.
Example: GIN+VV+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 184 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Design revision date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 380 Drawing revision date
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+380:20020801:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 185 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Engineering change date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 60 Engineering change level date
2380 Date or time or period text C an..14 R an..14 Engineering Change Date 2379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.This date may be transmitted only if Engineering Change Number is transmitted.
Example: DTM+60:20020801:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 186 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Delivery date to ultimate customer
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 191 Delivery date/time, expected
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:There is no code available to qualify exactly 'delivery date to ultimate customer'. Within this SG17, the qualifier 17 = Delivery date/time,estimated shall be interpreted as delivery date to ultimate customer.All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+191:20021205:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 187 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Effective period of delivery instruction
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 273 Validity period
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM609 YYMM709 YYMM-YYMM710 CCYYMM-CCYYMM711 CCYYMMDD-CCYYMMDD
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+273:0212:609'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 188 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Requested delivery date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 2 Delivery date/time, requested
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+2:20021203:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 189 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Requested shipment date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 10 Shipment date/time, requested
2380 Date or time or period text C an..35 R an..352379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+10:20021201:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 190 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
DTM O 1 Order date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 4 Order document issue date time
2380 Date or time or period text C an..35 R an..352379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:All DTM Segments in one SG17 shall not exceed 5 occurrences.
Example: DTM+4:20021115:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 191 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
NAD O 1 Manufacturer
EDIFACT ContiTag Name St Format St Format Usage / Remark3035 Party function code qualifier M an..3 M an..3 MF Manufacturer of goodsC082 Party identification details C O3039 Party identifier M an..35 M an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan InformationProcessing Development Center / ElectronicCommerce Promotion Center)
C058 Name and address C R3124 Name and address description M an..35 M an..353124 Name and address description C an..35 O an..353124 Name and address description C an..35 O an..353124 Name and address description C an..35 O an..353124 Name and address description C an..35 O an..35
C080 Party name C O3036 Party name M an..35 M an..353036 Party name C an..35 O an..35 see 3036 # 13036 Party name an..35 N Not used3036 Party name an..35 N Not used3036 Party name an..35 N Not used3045 Party name format code an..3 N Not used
C059 Street C O3042 Street and number or post
office box identifierM an..35 M an..35
3042 Street and number or postoffice box identifier
C an..35 O an..35
3042 Street and number or postoffice box identifier
an..35 N Not used
3042 Street and number or postoffice box identifier
an..35 N Not used
3164 City name C an..35 O an..35C819 Country subdivision details C O3229 Country subdivision identifier C an..9 C an..91131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3228 Country subdivision name an..70 N Not used3251 Postal identification code C an..17 O an..173207 Country identifier C an..3 O an..3
Remark:In most cases it will be sufficient to use C082 for identification of invoicee. If not, either C058 (unstructured address) or C080 and followingdata elements should be used (structured address). The preferred version is the structured address.
Example: NAD+MF'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 192 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
FTX O 1 Delivery instruction type
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 ICN Consignment information for consignee4453 Free text function code an..3 N Not usedC107 Text reference C R4441 Free text description code M an..17 M an..17 F
P1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 10 ODETTE
C108 Text literal N4440 Free text an..512 N Not used4440 Free text an..512 N Not used4440 Free text an..512 N Not used4440 Free text an..512 N Not used4440 Free text an..512 N Not used
3453 Language name code an..3 N Not used4447 Free text format code an..3 N Not used
Remark:
Example: FTX+ICN'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 193 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
FTX O 99 Article long description
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 LIN Line item4453 Free text function code an..3 N Not usedC107 Text reference N4441 Free text description code an..17 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C108 Text literal C R4440 Free text M an..256 M an..2564440 Free text C an..256 O an..2564440 Free text C an..256 O an..2564440 Free text C an..256 O an..2564440 Free text C an..256 O an..256
3453 Language name code C an..3 O an..34447 Free text format code an..3 N Not used
Remark:These free text lines are available for additional article description.
Example: FTX+LIN'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 194 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG17 R 9999 Article and Despatched Article
some location can only handle one position per ASN
MOA O 1 Customs declared value
EDIFACT ContiTag Name St Format St Format Usage / RemarkC516 Monetary amount M M5025 Monetary amount type code
qualifierM an..3 M an..3 40 Goods item for customs declared value amount
5004 Monetary amount C n..35 R n..35 Customs delcared value6345 Currency identification code C an..3 O an..36343 Currency type code qualifier an..3 N Not used4405 Status description code an..3 N Not used
Remark:If this segment is used, it serves also as an indicator that this material is subject to customs procedures.
Example: MOA+40:1000.00:EUR'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 195 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 1 Shipment / Delivery note reference
RFF M 1 Shipment / Delivery note reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 DQ Delivery note number1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+DQ:12345:020'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 196 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 1 Shipment / Delivery note reference
DTM O 1 Delivery note date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..14 R n..142379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 197 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 5 Delivery instruction / schedule reference and item related contact information
This segment group contains either a reference to the delivery instruction or contact information belonging to the line item (which is usedby JAMA/JAPIA) or both.
RFF M 1 Delivery instruction / schedule reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 AAN Delivery schedule number1154 Reference identifier C an..70 D an..70 This element has to be used, if the actual delivery instruction is
referenced.1156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:Delivery instruction and delivery schedule are used as synonyms.
Example: RFF+AAN:12345:050'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 198 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 5 Delivery instruction / schedule reference and item related contact information
This segment group contains either a reference to the delivery instruction or contact information belonging to the line item (which is usedby JAMA/JAPIA) or both.
CTA O 1 Item related contact information
EDIFACT ContiTag Name St Format St Format Usage / Remark3139 Contact function code C an..3 R an..3 DL Delivery contact
IC Information contactMC Material control contactPD Purchasing contactSC Schedule contact
C056 Contact details C O3413 Contact identifier C an..17 O an..173412 Contact name C an..256 O an..256
Remark:
Example: CTA+DL+:F. Firestone'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 199 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 5 Delivery instruction / schedule reference and item related contact information
This segment group contains either a reference to the delivery instruction or contact information belonging to the line item (which is usedby JAMA/JAPIA) or both.
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:Only used with the delivery note reference
Example: DTM+171:20021101:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 200 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 R 1 Order reference
RFF M 1 Order reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 ON Order document identifier, buyer assigned1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+ON:ABC123:1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 201 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 R 1 Order reference
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171:20021101:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 202 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 99 Individual references
RFF M 1 Reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 R an..3 Document Type Coded
The codes of this codelist are documented in a separatedocument
1154 Reference identifier C an..70 R an..70 Document Number 1156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:Any document from the qualifier codelist relevant at the article level and other than those specifically referenced in the followingoccurrences of the RFF segment in any logical position may be identified here when needed:
Example: RFF+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 203 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG18 O 99 Individual references
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C n..14 R n..14 Document Date/Time 2379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 204 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG19 O 1 Dangerous goods information
DGS M 1 Dangerous goods
EDIFACT ContiTag Name St Format St Format Usage / Remark8273 Dangerous goods regulations
codeC an..3 O an..3
C205 Hazard code C O8351 Hazard identification code M an..7 M an..78078 Additional hazard classification
identifierC an..7 C an..7
8092 Hazard code version identifier C an..10 C an..10C234 UNDG information C O7124 United Nations Dangerous
Goods (UNDG) identifierC n4 C n4
7088 Dangerous goods flashpointdescription
C an..8 C an..8
C223 Dangerous goods shipmentflashpoint
N
7106 Shipment flashpoint degree n3 N Not used6411 Measurement unit code an..8 N Not used
8339 Packaging danger level code an..3 N Not used8364 Emergency procedure for ships
identifieran..6 N Not used
8410 Hazard medical first aid guideidentifier
an..4 N Not used
8126 Transport emergency cardidentifier
an..10 N Not used
C235 Hazard identification placarddetails
N
8158 Orange hazard placard upperpart identifier
an..4 N Not used
8186 Orange hazard placard lowerpart identifier
an4 N Not used
C236 Dangerous goods label N8246 Dangerous goods marking
identifieran..4 N Not used
8246 Dangerous goods markingidentifier
an..4 N Not used
8246 Dangerous goods markingidentifier
an..4 N Not used
8255 Packing instruction type code an..3 N Not used8179 Transport means description
codean..8 N Not used
8211 Hazardous cargo transportauthorisation code
an..3 N Not used
Remark:
Example: DGS+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 205 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG19 O 1 Dangerous goods information
FTX O 1 Dangerous goods description
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 AAD Dangerous goods technical name4453 Free text function code an..3 N Not usedC107 Text reference N4441 Free text description code an..17 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C108 Text literal C R4440 Free text M an..512 M an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..512
3453 Language name code C an..3 O an..34447 Free text format code an..3 N Not used
Remark:
Example: FTX+AAD'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 206 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG19 O 1 Dangerous goods information
FTX O 1 Dangerous goods declaration exception
EDIFACT ContiTag Name St Format St Format Usage / Remark4451 Text subject code qualifier M an..3 M an..3 HAZ Hazard information4453 Free text function code an..3 N Not usedC107 Text reference N4441 Free text description code an..17 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
C108 Text literal C R4440 Free text an..512 N Not used4440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..5124440 Free text C an..512 O an..512
3453 Language name code C an..3 O an..34447 Free text format code an..3 N Not used
Remark:
Example: FTX+HAZ'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 207 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG20 O 1 Place of discharge
LOC M 1 Place of discharge
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 11 Place of dischargeC517 Location identification C O3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC C
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC C
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 C an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:The Place of discharge may be accompanied by additional place one and two.
Example: LOC+11'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 208 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG20 O 1 Internal place of destination
LOC M 1 Place/location identification
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 7 Place of delivery
18 Warehouse159 Additional internal destination229 Inspection site
C517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationC O
3233 Second related locationidentifier
C an..35 O an..35
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3232 Second related location name C an..70 O an..705479 Relation code an..3 N Not used
Remark:The following combinations are applicable:Place of discharge (LOC+11) + Additional Internal destination (LOC+159)Place of discharge (LOC+11) + Warehouse destination (LOC+18)Place of discharge (LOC+11) + Inspection site (LOC+229)Place of discharge (LOC+11) + Place of destination [in the sense of manufacturing line] (LOC+7) + manufacturing process (LOC+54)
Example: LOC+'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 209 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG20 O 1 Manufacturing process
LOC M 1 Place/location identification
EDIFACT ContiTag Name St Format St Format Usage / Remark3227 Location function code qualifier M an..3 M an..3 54 Manufacturing departmentC517 Location identification C R3225 Location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3224 Location name C an..256 O an..256C519 Related location one
identificationC O
3223 First related location identifier C an..35 O an..351131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3
3222 First related location name C an..70 O an..70C553 Related location two
identificationN
3233 Second related locationidentifier
an..35 N Not used
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
3232 Second related location name an..70 N Not used5479 Relation code an..3 N Not used
Remark:
Example: LOC+54'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 210 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG22 O 1 Service package information
This segment group shall be used to describe packaging for individual articles and service parts in service parts packaging.
PCI M 1 Service Package ID
EDIFACT ContiTag Name St Format St Format Usage / Remark4233 Marking instructions code C an..3 R an..3 1 Do not mark suppliers company nameC210 Marks & labels C R7102 Shipping marks description M an..35 M an..357102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used
8169 Full or empty indicator code an..3 N Not usedC827 Type of marking N7511 Marking type code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
Remark:
Example: PCI+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 211 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG22 O 1 Service package information
This segment group shall be used to describe packaging for individual articles and service parts in service parts packaging.
QTY O 1 Quantity per service pack
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 52 Quantity per pack6060 Quantity M an..35 M an..356411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+52'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 212 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG10 O 1 Despatch control line / List of handling unit group s
The maximum number of SG 10 in a message shall not exceed 9999.
CPS M 1 Consignment packing sequence
EDIFACT ContiTag Name St Format St Format Usage / Remark7164 Hierarchical structure level
identifierM n..6 R n..6 Line Item Number
7166 Hierarchical structure parentidentifier
C an..35 O an..35
7075 Packaging level code C an..3 R an..3 3 Outer
Remark:Mapping commentsThe hierarchical structure of the message has to be created by a proper combination of values in DE 7164 (line number) and 7166 (parentline number). There is no default article driven or package driven logic. Therefore, the message can be used for every variant of thebusiness process.Business partners using this message should specify mutually the implementation profile in order to simplify the usage. The values of this Line Number shall not duplicate other occurrences of the CPS.
Example: CPS+30++3'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 213 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
PAC M 1 Package
EDIFACT ContiTag Name St Format St Format Usage / Remark7224 Package quantity C n..6 D n..6 Number Of Identical Handling Units C531 Packaging details C R7075 Packaging level code C an..3 C an..37233 Packaging related description
codeC an..3 R an..3 35 Type of package
7073 Packaging terms andconditions code
an..3 N Not used
C202 Package type C O7065 Package type description code C an..17 R an..171131 Code list identification code C an..17 C an..173055 Code list responsible agency
codeC an..3 O an..3 b.Code List Responsible Agency
10 ODETTE91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
ZZZ Mutually defined7064 Type of packages an..35 N Not used
C402 Package type identification N7077 Description format code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used
C532 Returnable package details N8395 Returnable package freight
payment responsibility codean..3 N Not used
8393 Returnable package loadcontents code
an..3 N Not used
Remark:
Example: PAC++1:35'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 214 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
MEA O 1 Length
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C C6313 Measured attribute code C an..3 C an..3 LN Length6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..5 R n..5 Length 6162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+LN+MTR:1.2'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 215 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
MEA O 1 Width
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 Constant Identifying A Width Dimension
WD Width dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..12 R n..12 Width 6162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+WD+MTR:1.0'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 216 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
MEA O 1 Height
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 HT Height dimension6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..3 R an..36314 Measure C n..5 R n..56162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+HT+MTR:1.2'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 217 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
MEA O 1 Volume
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 ABJ Volume6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 R an..86314 Measure C n..5 R n..56162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+ABJ+MTQ:1.44'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 218 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
MEA O 1 Maximum stacking weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 ABR Certified weight
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AFE Maximum stacking weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C n..12 R n..126162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+ABR+AFE+KGM:2000'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 219 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
QTY O 1 Maximum stackability
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 171 Maximum stackability6060 Quantity M n..3 M n..36411 Measurement unit code C an..8 O an..8
Remark:
Example: QTY+171:2:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 220 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 R 1 Handling unit group details
QTY O 1 Number of contained packages/items
EDIFACT ContiTag Name St Format St Format Usage / RemarkC186 Quantity details M M6063 Quantity type code qualifier M an..3 M an..3 189 Number of packages in handling unit6060 Quantity M n..6 M n..6 Number Of Packages In The Handling Unit 6411 Measurement unit code C an..8 O an..8 C62 one
Remark:
Example: QTY+189:10:C62'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 221 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
PCI M 1 Triggersegment
EDIFACT ContiTag Name St Format St Format Usage / Remark4233 Marking instructions code C an..3 R an..3 1 Do not mark suppliers company name
Dummy value C210 Marks & labels N7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used
8169 Full or empty indicator code an..3 N Not usedC827 Type of marking N7511 Marking type code an..3 N Not used1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
Remark:Dummy, necessary for access to RFF segment
Example: PCI+1'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 222 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
RFF O 1 Shipment/despatch note reference
EDIFACT ContiTag Name St Format St Format Usage / RemarkC506 Reference M M1153 Reference code qualifier M an..3 M an..3 AAU Despatch note document identifier1154 Reference identifier C an..70 R an..701156 Document line identifier C an..6 O an..61056 Version identifier an..9 N Not used1060 Revision identifier an..6 N Not used
Remark:
Example: RFF+AAU'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 223 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
DTM O 1 Reference date
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 171 Reference date/time
2380 Date or time or period text C an..35 R an..352379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+171'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 224 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
DTM O 1 Delivery date, requested
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 2 Delivery date/time, requested
2380 Date or time or period text C an..35 C an..352379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+2'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 225 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
DTM O 1 Shipment date, requested
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 10 Shipment date/time, requested
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 102 CCYYMMDD
203 CCYYMMDDHHMM
Remark:
Example: DTM+10'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 226 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 O 1 Shipment / despatch note reference
DTM O 1 Actual despatch date / time
EDIFACT ContiTag Name St Format St Format Usage / RemarkC507 Date/time/period M M2005 Date or time or period function
code qualifierM an..3 M an..3 11 Despatch date and or time
2380 Date or time or period text C n..12 R n..122379 Date or time or period format
codeC an..3 O an..3 9 CCYYMMDDPP
102 CCYYMMDD203 CCYYMMDDHHMM
Remark:
Example: DTM+11:9:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 227 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG13 M 1000 List of individual handling units
PCI M 1 Handling unit label type
EDIFACT ContiTag Name St Format St Format Usage / Remark4233 Marking instructions code C an..3 O an..3 17 Seller's instructionsC210 Marks & labels N7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used7102 Shipping marks description an..35 N Not used
8169 Full or empty indicator code an..3 N Not usedC827 Type of marking C O7511 Label identifier coded M an..3 R an..3 Handling Unit Category 1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 R an..3 5 ISO (International Organization for
Standardization)10 ODETTE
167 US, AIAG (Automotive Industry Action Group)
Remark:
Example: PCI+17'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 228 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG15 D 1 Individual handling unit's transport label number
GIN M 1 Individual handling unit's transport label number
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 ML Marking/label number
C208 Identity number range M M7402 Object identifier M an..17 M an..17 Handling unit's transport label number 7402 Object identifier C an..35 O an..35
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
C208 Identity number range N7402 Object identifier an..35 N Not used7402 Object identifier an..35 N Not used
Remark:
Example: GIN+ML'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 229 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG15 R 98 Individual handling unit's label numbers
GIN M 1 Individual packaging item's label numbers
EDIFACT ContiTag Name St Format St Format Usage / Remark7405 Object identification code
qualifierM an..3 M an..3 AW Serial shipping container code
C208 Identity number range M M7402 Object identifier M an..35 M an..35 The same value used in RFF+ACI of the single-packaging7402 Object identifier C an..35 O an..35
C208 Identity number range C O Further label numbers of packages contained in the identifiedhandling unit.
7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further label numbers of packages contained in the identifiedhandling unit.
7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further label numbers of packages contained in the identifiedhandling unit.
7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
C208 Identity number range C O Further label numbers of packages contained in the identifiedhandling unit.
7402 Object identifier M an..35 M an..357402 Object identifier C an..35 O an..35
Remark:List of or Range of serial numbers of packages contained in the identified handling unit.
Example: GIN+AW'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 230 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG16 O 1 Individual handling unit's weights
Since the gross and net weights may be different even for individual handling units belonging to the same handling unit group, they have tobe stated individually rather than as a common property of the handling unit group.
COD M 1 Trigger segment
EDIFACT ContiTag Name St Format St Format Usage / RemarkC823 Type of unit/component C R7505 Unit or component type
description codeC an..3 R an..3 NO
This segment is used as trigger only. Since UN/EDIFACTsyntax rules require at least one data element in a segment, adummy code has to be transmitted.
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
7504 Unit or component typedescription
an..35 N Not used
C824 Component material N7507 Component material
description codean..3 N Not used
1131 Code list identification code an..17 N Not used3055 Code list responsible agency
codean..3 N Not used
7506 Component materialdescription
an..35 N Not used
Remark:
Example: COD+NO'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 231 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG16 O 1 Individual handling unit's weights
Since the gross and net weights may be different even for individual handling units belonging to the same handling unit group, they have tobe stated individually rather than as a common property of the handling unit group.
MEA O 1 Gross weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AAB Goods item gross weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 M an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+AAB'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 232 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG16 O 1 Individual handling unit's weights
Since the gross and net weights may be different even for individual handling units belonging to the same handling unit group, they have tobe stated individually rather than as a common property of the handling unit group.
MEA O 1 Net weight
EDIFACT ContiTag Name St Format St Format Usage / Remark6311 Measurement purpose code
qualifierM an..3 M an..3 AAZ Handling unit measurement
C502 Measurement details C R6313 Measured attribute code C an..3 R an..3 AAA Net weight6321 Measurement significance
codean..3 N Not used
6155 Non-discrete measurementname code
an..17 N Not used
6154 Non-discrete measurementname
an..70 N Not used
C174 Value/range C R6411 Measurement unit code M an..8 R an..86314 Measure C an..18 R an..186162 Range minimum quantity n..18 N Not used6152 Range maximum quantity n..18 N Not used6432 Significant digits quantity n..2 N Not used
7383 Surface or layer code an..3 N Not used
Remark:
Example: MEA+AAZ+AAA'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 233 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG10 O 9999 Despatch control line / List of Packaging AID
The maximum number of SG 10 in a message shall not exceed 9999.
CPS M 1 Consignment packing sequence
EDIFACT ContiTag Name St Format St Format Usage / Remark7164 Hierarchical structure level
identifierM n..6 R n..6 Line Item Number
7166 Hierarchical structure parentidentifier
C an..35 O an..35
7075 Packaging level code C an..3 R an..3 2 Intermediate
Remark:Mapping commentsThe hierarchical structure of the message has to be created by a proper combination of values in DE 7164 (line number) and 7166 (parentline number). There is no default article driven or package driven logic. Therefore, the message can be used for every variant of thebusiness process.Business partners using this message should specify mutually the implementation profile in order to simplify the usage. The values of this Line Number shall not duplicate other occurrences of the CPS.
Example: CPS+30++2'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 234 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
SG11 O 9999 Packaging aid
PAC M 1 Package
EDIFACT ContiTag Name St Format St Format Usage / Remark7224 Package quantity C n..8 O n..8C531 Packaging details C R7075 Packaging level code C an..3 C an..37233 Packaging related description
codeC an..3 R an..3 37 Package protection
7073 Packaging terms andconditions code
C an..3 O an..3
C202 Package type C O7065 Package type description code C an..17 R an..171131 Code list identification code an..17 N Not used3055 Code list responsible agency
codeC an..3 O an..3 10 ODETTE
91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
204 DE, VDA (Verband der Automobilindustrie E.V.)ZZZ Mutually defined
7064 Type of packages an..35 N Not usedC402 Package type identification N7077 Description format code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used7064 Type of packages an..35 N Not used7143 Item type identification code an..3 N Not used
C532 Returnable package details N8395 Returnable package freight
payment responsibility codean..3 N Not used
8393 Returnable package loadcontents code
an..3 N Not used
Remark:
Example: PAC++:37'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 235 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
UNT M 1 Message trailer
EDIFACT ContiTag Name St Format St Format Usage / Remark0074 Number of segments in the
messageM n..6 M n..6 Number of segments in the message
0062 Message reference number M an..14 M an..14 Message reference number
Remark:
Example: UNT+198+ABC123'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 Continental Issue date: 31.10.2008 Print date: 24.01.2014 Page: 236 /Generated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag St MaxOcc
UNZ M 1 Interchange trailer
EDIFACT ContiTag Name St Format St Format Usage / Remark0036 Interchange control count M n..6 M n..60020 Interchange control reference M an..14 M an..14
Remark:
Example: UNZ+1+X'
GLOBAL DESADV
Example Message
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 237 /
No = Consecutive segment number
No Tag Example
01 UNB UNB+UNOC:3+X:1:X+X:1:X+080617:1009+X+X+X+A+1+X+1'
02 UNH UNH+ABC123+DESADV:D:07A:UN:GA0220'
03 BGM BGM+351:::ABC123+ABC123::1+1+AB'
04 DTM DTM+137:20021201:102'
05 DTM DTM+11:20021201:102'
06 DTM DTM+132:20021202:102'
07 DTM DTM+2:20021203:102'
08 DTM DTM+10:20021201:102'
09 DTM DTM+257:20021201:102'
10 ALI ALI+++67'
11 MEA MEA+AAX+AAD+KGM:1000'
12 MEA MEA+AAX+AAL+KGM:950'
13 MEA MEA+AAX+ABJ+LTR:345'
14 MEA MEA+LMT++MTR:3'
15 MEA MEA+AAE+:::ABC123+C62:24'
16 MOA MOA+107:100:EUR'
17 MOA MOA+46:10:EUR'
18 MOA MOA+64:200:USD'
19 MOA MOA+40:200000:EUR'
SG1
20 RFF RFF+AAS:TD-2002-101:120'
21 DTM DTM+171:20021123:102'
SG1
22 RFF RFF+CRN:23/22176:1'
23 DTM DTM+171:20021201:102'
SG1
24 RFF RFF+PK:PK-20021123-21:3'
25 DTM DTM+171:20021130:102'
SG1
26 RFF RFF+ARG:12345:010'
27 DTM DTM+171:20021201:102'
SG1
28 RFF RFF+AAU:12345'
29 DTM DTM+171:20021201:102'
SG1
30 RFF RFF+AWB:12345:1'
31 DTM DTM+171:20021001:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 238 /
No = Consecutive segment number
No Tag Example
SG1
32 RFF RFF+BM:12345:1'
33 DTM DTM+171:20021001:102'
SG1
34 RFF RFF+AAM:12345:1'
35 DTM DTM+171:20021001:102'
SG1
36 RFF RFF+AAA:ABC123:1'
37 DTM DTM+171:20021001:102'
SG2
38 NAD NAD+ST+33::5'
39 LOC LOC+11+W0001'
40 LOC LOC+18+Stock1'
SG3
41 RFF RFF+ADE:CN998877'
SG4
42 CTA CTA+IC+:Arthur Miller'
43 COM COM+001 637 2134 5543:FX'
SG2
44 NAD NAD+BY'
45 LOC LOC+11+GATE 15:::Gate 15'
46 LOC LOC+'
SG3
47 RFF RFF+ADE:CN998877'
SG3
48 RFF RFF+VA:DE 88776655'
SG4
49 CTA CTA+IC+:Arthur Miller'
50 COM COM+0049 637 2134 5543:FX'
SG2
51 NAD NAD+MI'
SG4
52 CTA CTA+IC'
53 COM COM+'
SG2
54 NAD NAD+UD'
55 LOC LOC+11'
56 LOC LOC+++X:::X+X:::X'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 239 /
No = Consecutive segment number
No Tag Example
SG4
57 CTA CTA+IC'
58 COM COM+'
SG2
59 NAD NAD+SU+100-98654::92'
60 LOC LOC+5'
SG3
61 RFF RFF+ADE:CN998877'
SG3
62 RFF RFF+VA:NL 33224422'
SG4
63 CTA CTA+IC+:Hans Hansen'
64 COM COM+0031 637 2134 5543:FX'
SG4
65 CTA CTA+AD'
66 COM COM+'
SG4
67 CTA CTA+SR'
68 COM COM+'
SG2
69 NAD NAD+CA'
SG3
70 RFF RFF+ADE:12587'
SG2
71 NAD NAD+SF'
72 LOC LOC+9'
SG3
73 RFF RFF+ADE:36962'
SG4
74 CTA CTA+EX'
75 COM COM+'
SG4
76 CTA CTA+IC+G777'
77 COM COM+9987654:TE'
SG2
78 NAD NAD+FW'
SG3
79 RFF RFF+ADE:36962'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 240 /
No = Consecutive segment number
No Tag Example
SG4
80 CTA CTA+IC+:H. Friday'
81 COM COM+099 1235 5522 888:FX'
SG4
82 CTA CTA+NT'
83 COM COM+'
SG2
84 NAD NAD+FZ'
SG3
85 RFF RFF+ADE:36962'
SG4
86 CTA CTA+IC'
87 COM COM+'
SG4
88 CTA CTA+NT'
89 COM COM+'
SG2
90 NAD NAD+MF'
SG3
91 RFF RFF+ADE:36962'
SG4
92 CTA CTA+IC'
93 COM COM+'
SG4
94 CTA CTA+NT'
95 COM COM+'
SG2
96 NAD NAD+HM'
SG2
97 NAD NAD+MS'
SG2
98 NAD NAD+MR'
SG2
99 NAD NAD+CZ'
SG2
100 NAD NAD+DP++::::X'
SG2
101 NAD NAD+CK'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 241 /
No = Consecutive segment number
No Tag Example
SG5
102 TOD TOD+1+A+FOB'
103 LOC LOC+1'
104 FTX FTX+AAR++++AA'
SG6
105 TDT TDT+12+123+10+11+ABC123::185++G:A+ABC123::5:ABC123: DE+1'
106 PCD PCD+36'
SG8
107 EQD EQD+CN+12345'
108 MEA MEA+PD+LN+FOT:20'
109 MEA MEA+PD+WD+FOT:20'
110 MEA MEA+PD+HT+FOT:20'
111 MEA MEA+PD+G+KGM:1000'
112 MEA MEA+PD+AAL+KGM:950'
SG10
113 CPS CPS+10+1+1'
114 FTX FTX+AAI'
SG11
115 PAC PAC+5+:35:11+BE::92+F+:11'
116 MEA MEA+AAY+G+KGM:1000'
117 MEA MEA+AAY+AAL+KGM:990'
118 MEA MEA+AAY+LN+CMT:100'
119 MEA MEA+AAY+WD+CMT:100'
120 MEA MEA+AAY+HT+CMT:100'
121 QTY QTY+52:10:C62'
122 QTY QTY+171:3:C62'
SG13
123 PCI PCI+17+455485++1J::5'
124 RFF RFF+ACI:#443'
SG14
125 GIR GIR+1+:BX'
126 DTM DTM+94'
127 DTM DTM+36'
SG15
128 GIN GIN+ML+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
SG15
129 GIN GIN+AL'
SG15
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 242 /
No = Consecutive segment number
No Tag Example
130 GIN GIN+BU'
SG11
131 PAC PAC+1+:37:7+CODE::10'
SG17
132 LIN LIN+1++ABC123:IN++0'
133 PIA PIA+1+76543:SA+76543:DR+76543:EC+76543:GS+76543:CL'
134 PIA PIA+1+76543:UA+76543:MP::92+76543:GB'
135 PIA PIA+4+76543:SA+76543'
136 IMD IMD+++01::10:XYZ iron mount::AA'
137 MEA MEA+PD+AAL+KGM:10'
138 QTY QTY+1:10:C62'
139 QTY QTY+12:50:C62'
140 QTY QTY+21:50:C62'
141 QTY QTY+113:50:C62'
142 QTY QTY+119:10:C62'
143 QTY QTY+X01:10:C62'
144 ALI ALI+SE+1+73'
145 GIN GIN+BN+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
146 GIN GIN+EE+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
147 GIN GIN+VV+#01:#02+#03:#04+#05:#06+#07:#08+#09:#10'
148 DTM DTM+380:20020801:102'
149 DTM DTM+60:20020801:102'
150 DTM DTM+191:20021205:102'
151 DTM DTM+273:0212:609'
152 DTM DTM+2:20021203:102'
153 DTM DTM+10:20021201:102'
154 DTM DTM+4:20021115:102'
155 NAD NAD+MF'
156 FTX FTX+ICN'
157 FTX FTX+LIN'
158 MOA MOA+40:1000.00:EUR'
SG18
159 RFF RFF+DQ:12345:020'
160 DTM DTM+171'
SG18
161 RFF RFF+AAN:12345:050'
162 CTA CTA+DL+:F. Firestone'
163 DTM DTM+171:20021101:102'
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 243 /
No = Consecutive segment number
No Tag Example
SG18
164 RFF RFF+ON:ABC123:1'
165 DTM DTM+171:20021101:102'
SG18
166 RFF RFF+'
167 DTM DTM+'
SG19
168 DGS DGS+'
169 FTX FTX+AAD'
170 FTX FTX+HAZ'
SG20
171 LOC LOC+11'
SG20
172 LOC LOC+'
SG20
173 LOC LOC+54'
SG22
174 PCI PCI+1'
175 QTY QTY+52'
SG10
176 CPS CPS+30++3'
SG11
177 PAC PAC++1:35'
178 MEA MEA+AAZ+LN+MTR:1.2'
179 MEA MEA+AAZ+WD+MTR:1.0'
180 MEA MEA+AAZ+HT+MTR:1.2'
181 MEA MEA+AAZ+ABJ+MTQ:1.44'
182 MEA MEA+ABR+AFE+KGM:2000'
183 QTY QTY+171:2:C62'
184 QTY QTY+189:10:C62'
SG13
185 PCI PCI+1'
186 RFF RFF+AAU'
187 DTM DTM+171'
188 DTM DTM+2'
189 DTM DTM+10'
190 DTM DTM+11:9:102'
SG13
GLOBAL DESADV
GLOBAL DESADV; JAI 2.0; 2010 DESADV / UN D.07A S3 Issue date: 31.10.2008ContinentalGenerated by GEFEG.FX
Print date: 24.01.2014Page: 244 /
No = Consecutive segment number
No Tag Example
191 PCI PCI+17'
SG15
192 GIN GIN+ML'
SG15
193 GIN GIN+AW'
SG16
194 COD COD+NO'
195 MEA MEA+AAZ+AAB'
196 MEA MEA+AAZ+AAA'
SG10
197 CPS CPS+30++2'
SG11
198 PAC PAC++:37'
199 UNT UNT+198+ABC123'
200 UNZ UNZ+1+X'