Global 5-5-10 Program for Nano/Micro Mechanical Engineering.
-
Upload
cecily-stokes -
Category
Documents
-
view
215 -
download
0
Transcript of Global 5-5-10 Program for Nano/Micro Mechanical Engineering.
Global 5-5-10 Programfor Nano/Micro
Mechanical Engineering
○ Vision And Objectives
<Educational Objectives>
(1) To achieve scholarly excellence in Nano/Micro Mechanical
Engineering.
(2) To achieve the ability to fuse/integrate novel
technologies in
Mechanical Eng.
(3) To enhance the ability to adapt/manage technological
innovations.
(4) To educate competent engineers with international
leadership in
Nano/Micro Mechanical Engineering.
<Research Objectives>
Our research area spans design, manufacturing and
integration of Nano/Micro-based technologies, to be
conducive to industrialization and commercialization of the
future technologies as leading experts.
○ Vision And Objectives
NanoInformation device
NanoDisplay
Nano/BioDevice
Future Car Technology
Nanoenergy
NanoOptical Device
Next generationsemiconductor
Nano/Micro mechatronicsNano/Micro manufacturing technology
Nano-based mechanical technologyEnsuring the top ten worldwide research capability
Nano environment Mechanical technology
Nano/Micro design/analysis technology
○ Vision And ObjectivesN
ati
on
al w
ealt
h
Past Present Future
Car, Electronics, Steel, Mechanics, Shipbuilding,
Chemicals
Traditional key Industries
Semiconductor, Display, Car, Communication,
Shipbuilding, Consumer electronics
Growth Engine Industries
Next generation semiconductor, Nano display,
Future Car technology, Fuel cell, Nano-bio device,
Environment system, Intelligent robot
Future industries for national
wealth
Break
thro
ugh!
Nano/M
icro
Applied m
echan
ical
tech
nology
○ Organization and Participants
Analysis/Design Mechatronics Manufacturing
Academic Disciplines
Nano/Micro
Manufacturing team
Nano/Micro
Mechatronicsteam
Nano/Miocro
Analysis/Designteam
Fusion and
Application
Nano/Micro
Environmental Technology team
Application to Nano/Micro Technology
○ Organization and Participants
No Professor Name Area of Research
1 Kang, Shinill- Nano imprinting lithography- Optical MEMS, micro optics
2 Kim, Kyoungsik- Laser materials processing and micromachining- Optical microsensors development
3 Kim, Dae-Eun- Nanotribology- Micro-machining technology
4 Kim, Young-Joo- Near-field Optical Application- High Density Information Storages
5 Kim, Yong-Jun- Micro Sensors and Actuators- General MEMS/Micromachining
6 Kim, Woochul- Nanoscale thermal energy transport - Heat dissipation in solid-state devices
7 Kim, Jongbaeg-Micro Mechatronic systems- Nano Transducer
8 Min, Byung-Kwon-Micro-nano mechatronics- Micro-nano fabrication and material processing simulation
9 Park, No-Cheol-Nano opto-mechatronics -High precision actuator
10 Park, Young-Pil- Vibration Analysis of Information Storage Devices (HDD, DVD) - Active Vibration Control of Nano-Scaled Mechatronics Systems
11 Yang, Hyun-Seok- Precision Servo Control for Information Storage Devices and Mechanical Systems- Robotics Position/Force Control
12 Yoo, Jeonghoon - Numerical Analysis of Elastic Field, Impact Problem And Electromagnetic Field- Optimal Design of Structures, Machine Parts, And Electric Devices
○ Organization and Participants
No Professor Name Area of Research
13 Lee, Kang-Yong
-Optimum Design and Durability Evaluation by Theoretical and Computational Fracture Mechanics and Fatigue Analysis- Experimental Reliability Analysis by Acoustic Emission Method
14 Lee, Sang-Jo-Machine tool Error compensation, OMM, CMM- Micro machining
15 Lee, Jongsoo- Design Optimization- Soft Computing in Intelligent Design & Control
16 Lee, Jinho- Microscale Heat Transfer and Microfluidics- Industrial and Vehicle Air Conditioning and Ventilation Systems
17 Jang, Yong Hoon- Electrical/Thermal Contacts - Electrical multiscale (micro/nano) contacts
18 Jun, Seong Chan - Nano Resonators- Nano & Micro electro-devices
19 Chun, Heoung-Jae- Analysis and Integrated Design of Intelligent and Micro Structures and composite Materials-Theoretical and Experimental Analysis of Nondestructive Evaluations
20 Jung Hyo-il- Bio-MEMS / Microfluidics- Cell mechanics / Lab-on-a-chip
21 Cho, Hyung-Hee- Nano-Heat Transfer in Optical Storage Devices- Micro-Heat Transfer in MEMS and Electronic Devices
22 Cha, Sung-Woon- Microcellular Foaming Process- Injection/Extrusion Development Axiomatic Design
23 Hahn, Jae Won- Laser diagnostics and micro optical sensor- Nano/micro opto-mechanical engineering
24 Hwang, Jung-Ho- Nano Technology for Contamination Control- Particle Detection & Generation
○ Research Fields
◎ Nano/Micro Manufacturing Tech.
- Precision manufacturing tech.
- Industrialization of nano/micro based elements &
components
◎ Nano/Micro Mechatronics
- Fusion of conventional & emerging mechatronics
- Interdisciplinary research & edu. between mech. eng &
multi-physics
◎ Nano/Micro Analysis/Design
- Understanding of nano/micro scale behavior of material &
process
- Design based on nano/micro scale analysis
◎ Nano/Micro-based Environmental Tech
- Mech. Eng based fusion of nano/ bio/environmental
technologies
- Education of leaders for environmental & mech-based
bio industries
○ Activities and Outputs
HRD program for Nano/Micro Mechanical
Engineering
Center for Information Storage DeviceOpto-Mechatronics,Ultra-High Precision Elements
Nano-Tribology, Micro thermal/FluidUltra-High Precision Servo
Center for near zero emission vehicle Measurement of Nano-PM by a Miniature-Scale Sensing Device
Optical Diagnostics for Measuring Nano-size PM in Engine Exhaust
Nanofabrication/Micro-optics NRL
Nano-imprinting, Nano-replicationNano/Bio Photonic Device
Micro Heat TransferDesign & Control NRL
Design and Control in Micro Heat Transfer
Research competitiveness of the program
Nano manufacturing research centerNano-micro fabrication using ion beam and laser
Ultra precision electrical/chemical machiningMicrofactory
Nano Opto-Lithography NRL
Plasmon optical componentNext generation lithography
Center for Information Storage Device
International Industrial Consortium(2001 ~ Present)
Class Company NameAnnual
Fee
Foreign
Philips, Hitachi,Ricoh, Fujitsu,Konica-Minolta,Panasonic, HLDS,TSST, Data play,Seagate
$10,000/yr
Domestic
Samsung Electronics,SAITLG Electronics,Samsung Eletro-MechanicsDaewoo Electronics
10 mil won/yr
Small/Medium company
DSI, Opto-mecha,JMI, IBule
5 mil won/yr
○ Activities and Outputs
International Industrial Projects
- Konica-Minolta : Prof. S-I. Kang, Prof. Y-J. Kim- Hitachi : Prof. N-C. Park, Prof. J-H. Yoo- GM Motors : Prof. K-M. Chun- Ricoh : Prof. Y-C. Rhim
Industrial Research Institute Collaboration
DSSC (Data Storage Systems Center;
Carnegie-Mellon Univ., USA) ODSC(Optical Data Storage Center;
Univ. of Arizona, USA)
DCML (Dynamics & Control of Machinery
Laboratory; Tokyo Inst. of Tech., Japan)
DSI (Data Storage Institute; Singapore) CMMS (Center for Mechanics of Micro
Systems; Nanyang Tech. Univ., Singapore) Laboratory for Optical Storage (Shanghai
Inst. of Optics & Fine Mechanics, China) Centre for Research in Information Storage
Technology (Univ. of Plymouth, UK) Smart and Intelligent Systems Lab.
(Virginia Tech., USA) GOTO Lab. (Tokai Univ., Japan) KAWAMOTO Lab. (Waseda Univ., Japan) ESASHI Lab. (Tohoku Univ., Japan) Data Storage System Lab. (Huazhong
Univ. of Science and Technology, China) Centre for Micro-Photonics (CMP;
Swinburne Univ., Australia)
TIT
U. Arizona
CMU
○ Activities and Outputs
○ Activities and Outputs
◎ Intensifying research/human interchange
through academic-industrial cooperation
- Constructing on-demanding educational system
- Increasing human/material and technical comprehension
by internship system
- Increasing job opportunity through the active participation
of membership company
◎ Increasing research projects and
promoting technology transfer/commercialization
- Creating research outcome to contribute industry profit
- Granting Incentive regarding research outcome
- Promoting primary projects having a potential
commercialization
○ Activities and Outputs
◎ Programs and Etc
* Foreign student education program
- Recruit & educate students from under developing
countries such as
China, Vietnam, India, and etc
- In alliance with domestic companies
* Joint research & education with industries
- Co-development of research
- Co-education of graduate students
○ Contact Point
◎ Chair : Yang, Hyun Seok
◎ Address : School of Mech. Eng. Yonsei University
262 Sungsan-Ro, Seodaemun-Gu, Seoul 120-749,
Korea
◎ Tel : +82-2-2123-2824
Fax : +82-2-312-2159
E-mail : [email protected]
◎ Home Page : http://bk21me.yonsei.ac.kr