Glissando Software Update V1.1.0.118 to V1.1.0 · of Glissando Desktop Scanner software release...
Transcript of Glissando Software Update V1.1.0.118 to V1.1.0 · of Glissando Desktop Scanner software release...
1/15
Glissando Software Update V1.1.0.118 to V1.1.0.124 Glissando Desktop Scanner Document Number: OB-000843-AN Document Issue: 3 Issue Date: 2020-05-26
Glissando Software Update V1.1.0.118 to V1.1.0.124
2/15 Objective Imaging Ltd.
© Copyright 2020 Objective Imaging Ltd. All rights reserved. LIMITATION OF LIABILITIES: IN NO EVENT WILL OBJECTIVE IMAGING LTD OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECTION, SPECIAL, INCIDENTAL, ECONOMIC, COVER OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT, USER DOCUMENTATION OR RELATED TECHNICAL SUPPORT, INCLUDING WITHOUT LIMITATION, DAMAGES OR COSTS RELATING TO THE LOSS OF PROFITS, BUSINESS, GOODWILL, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL OBJECTIVE IMAGING LTD OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM BY ANY OTHER THIRD PARTY ARISING OUT OF YOUR USE OF THE PRODUCT. IN NO EVENT WILL OBJECTIVE IMAGING LTD AND ITS SUPPLIERS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. DISCLAIMER: OBJECTIVE IMAGING LTD RESERVES THE RIGHT TO MAKE CHANGES IN SPECIFICATIONS AT ANY TIME AND WITHOUT NOTICE. THE INFORMATION PROVIDED BY THIS DOCUMENT IS BELIEVED TO BE ACCURATE AND RELIABLE. HOWEVER, NEITHER OBJECTIVE IMAGING LTD NOR ITS SUPPLIERS ASSUME ANY RESPONSIBILITY FOR ITS USE; OR FOR ANY INFRINGEMENT OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES RESULTING FROM ITS USE. NO LICENSE IS GRANTED ON ANY PATENTS OR PATENT RIGHT OF OBJECTIVE IMAGING LTD. All trademarks in this document are trademarks of their respective companies. Reproduction or transmission in whole or in part, in any form or by any means, electronic, mechanical or otherwise, is prohibited without the prior written consent of the copyright owner.
Objective Imaging Ltd. Unit 1, Quy Court
Colliers Lane Stow-cum-Quy
Cambridge, CB25 9AU United Kingdom
www.objectiveimaging.com
Glissando Software Update V1.1.0.118 to V1.1.0.124
3/15 Objective Imaging Ltd.
Contents
About this Document ............................................................................................................................. 4
Overview ........................................................................................................................................................ 4
Prerequisites .......................................................................................................................................... 5
Installation Files ............................................................................................................................................. 5
Installing Glissando V1.1.0.124 ............................................................................................................... 6
Installation Instructions ................................................................................................................................. 6
Appendix A—Camera Driver Update ..................................................................................................... 13
Prerequisites – Lumenera Camera Driver & Firmware ............................................................................... 13
Identifying Applicable Scanners .............................................................................................................. 13
Required Versions .................................................................................................................................... 13
Identifying Current Versions .................................................................................................................... 13
Installation Sources ................................................................................................................................. 14
Prerequisites – IDS-Imaging Camera Driver ................................................................................................ 14
Identifying Applicable Scanners .............................................................................................................. 14
Required Versions .................................................................................................................................... 14
Identifying Current Versions .................................................................................................................... 14
Installation Sources ................................................................................................................................. 15
Glissando Software Update V1.1.0.118 to V1.1.0.124
4/15 Objective Imaging Ltd.
About this Document
Overview
This document is intended to describe the necessary steps for upgrading OEM systems to version 1.1.0.124
of Glissando Desktop Scanner software release from the previous version 1.1.0.118.
The intended audience is system distributors and technical support staff.
The upgrade process can be performed at Glissando user sites using a single installation file that can either
be downloaded when on site or brought on site using a USB drive.
Though the upgrade from version 1.1.0.118 to 1.1.0.124 does not require updating the Glissando camera
drivers, that process is listed in Appendix A for reference. Please read the instructions carefully before
updating.
For assistance please contact [email protected]
Glissando Software Update V1.1.0.118 to V1.1.0.124
5/15 Objective Imaging Ltd.
Prerequisites
You need the Glissando V1.1.0.124 installation executable to perform the software update.
Installation Files
File(s): Setup_Glissando_V1.1.0.124a_x64_26-05-20.exe
Description: Glissando application software installation
Download: FTP:Setup_Glissando_V1.1.0.124a_x64_26-05-20.exe
Glissando Software Update V1.1.0.118 to V1.1.0.124
6/15 Objective Imaging Ltd.
Installing Glissando V1.1.0.124
The Glissando V1.1.0.124 installation can be run in place on an existing Glissando V1.1.0.118 system using
the instructions found in this section.
Installation Instructions
1. Administrator Login
Log in to the original Windows administrator account, typically named “Scanner” or “Desktop Scanner”.
2. Launch Installation
Launch installation file [Setup_Glissando_V1.1.0.124a_x64_26-05-20.exe] and click [Next] button as shown in Figure 1.
Figure 1 - Glissando setup welcome page
3. License Agreement
Read the license agreement and if acceptable click [I Agree] to continue as shown in Figure 2.
Glissando Software Update V1.1.0.118 to V1.1.0.124
7/15 Objective Imaging Ltd.
Figure 2 - License agreement
4. Settings Update
Under certain circumstances the warning page is displayed shown in Figure 3.
Figure 3 - Settings warning page
This indicates the installer does not have access to expected settings files. If this occurs then please follow the instructions to reboot the system and relaunch the installer from the original user account in Windows. Typically this is named “Scanner” or “Desktop Scanner” for Glissando systems. If this is not possible then please contact [email protected] for further assistance.
Glissando Software Update V1.1.0.118 to V1.1.0.124
8/15 Objective Imaging Ltd.
5. Flash Memory Update
Some scanners may require a flash memory update and will display the page shown in Figure 4.
Figure 4 - Flash memory update page
WARNING: Ensure there is no interruption to the scanner power during this process or flash memory corruption can occur. Click [Update] to continue, which will display the warning prompt shown in Figure 5.
Figure 5 - Power interruption warning
Click [Yes] to begin. A progress indicator will display shown in Figure 8.
Figure 6 - Programming flash memory progress indicator
When finished the message dialog will display shown in Figure 7. Click [OK] to continue.
Glissando Software Update V1.1.0.118 to V1.1.0.124
9/15 Objective Imaging Ltd.
Figure 7 - Flash memory update success
6. Default Sample Settings
The option page for sample settings is displayed as shown in Figure 8. This allows the reinstallation of the factory default sample settings files for Glissando. In the case of an on site upgrade for an exising Glissando user, please make sure this option is unchecked, as is shown in Figure 8.
Figure 8 - Default Sample Settings page
WARNING: Checking this option will overwrite the named sample settings:
• Faint Stained
• Fragmented
• Well Stained
• Z-Stack – Faint Stained
• Z-Stack – Fragmented
• Z-Stack – Well Stained When ready, click [Next] to continue.
7. Update OISwsViewer Application
If the OISwsViewer application is detected on the system, then the option to update this software is displayed as shown in Figure 9.
Glissando Software Update V1.1.0.118 to V1.1.0.124
10/15 Objective Imaging Ltd.
It is recommended to allow the update to take place. Changes to the Objective Imaging workspace format may require an updated OISwsViewer application to be able to view these images.
Figure 9 - Allow update to OISwsViewer application
Click [Next] button to continue.
8. Confirmation
The installation is ready to begin, as shown in Figure 10.
Figure 10 - Confirm installation
Click [Install] button to execute the installation or click [Cancel] button to abort.
9. Installation Process
During installation the progress is indicated as shown in Figure 11. Please wait whilst the installation takes place.
Glissando Software Update V1.1.0.118 to V1.1.0.124
11/15 Objective Imaging Ltd.
Figure 11 - Glissando software installation in progress
Once completed, click [Next >] to continue.
10. Additional Tasks
It is recommended to leave the option checked to create a desktop icon as shown in Figure 12.
Figure 12 - Additional Tasks page
Click [Next >] to continue.
11. Installation Finished
Confirmation will display that the installation has completed as shown in Figure 13.
Glissando Software Update V1.1.0.118 to V1.1.0.124
12/15 Objective Imaging Ltd.
Figure 13 - Installation completed
Click [Finish] to close the installer. To launch the new Glissando software, click the desktop shortcut as shown in Figure 14.
Figure 14 - Glissando desktop shortcut icon
Glissando Software Update V1.1.0.118 to V1.1.0.124
13/15 Objective Imaging Ltd.
Appendix A—Camera Driver Update
Prerequisites – Lumenera Camera Driver & Firmware
Identifying Applicable Scanners
Applies to all scanner systems.
Required Versions
Name Version
LuCam Capture 6.8.2
API Version 2.1.1.106
Driver Version 5.2.12.247
Firmware Version 11.71
FPGA Version 11.134
Identifying Current Versions
1. Close all software including Glissando Desktop Scanner application. 2. Click Start button > Lumenera > LuCam Capture application. 3. Click Help menu > About LuCam Capture… 4. Dialog displays version information, as shown in Figure 15.
Figure 15 - Lumenera version information
Glissando Software Update V1.1.0.118 to V1.1.0.124
14/15 Objective Imaging Ltd.
Installation Sources
File(s): 1_lucam_software_v6_8_2_current_version_feb_2018.exe
Description: Lumenera camera driver installation
Download Link: FTP: 1_lucam_software_v6_8_2_current_version_feb_2018.exe
File(s): usb_3_0_camera_firmware_updater_v3_0_0.exe lt225_and_lt425.zip
Description: Lumenera camera firmware updater & associated firmware file
Download Link: FTP: usb_3_0_camera_firmware_updater_v3_0_0.exe FTP: lt225_and_lt425.zip
Prerequisites – IDS-Imaging Camera Driver
Identifying Applicable Scanners
1. Click Start button. 2. Navigate to IDS folder. 3. Verify IDS Camera Manager exists. If IDS Camera Manager does not exist then this prerequisite does not apply.
Required Versions
Name Version
IDS Camera Manager 4.92.0.0
ueye_usb_64.sys 4.92.666.0
ueye_api_64.dll 4.92.822.0
Identifying Current Versions
1. Close all software including Glissando Desktop Scanner application. 2. Click Start button > IDS > IDS Camera Manager. 3. Click General Information button. 4. Dialog displays version information, shown in Figure 16.
Glissando Software Update V1.1.0.118 to V1.1.0.124
15/15 Objective Imaging Ltd.
Figure 16 - IDS webcam version information
Installation Sources
Important: existing IDS uEye installation must be fully uninstalled and system rebooted before updating to newer version. Failure to reboot can result in incorrect update. Please follow IDS-Imaging V4.92 Upgrade Instructions.
File(s): uEye-Full-49200-64-WHQL.zip OB-000804-AN-1-IDS-Imaging V4.92 Upgrade Instructions.pdf
Description: IDS-Imaging uEye camera software Installation instructions
Download: FTP: uEye-Full-49200-64-WHQL.zip FTP:OB-000804-AN-1-IDS-Imaging V4.92 Upgrade Instructions.pdf