Smart - Glide-Away Glass Door Range

PhilosophySmartech Door Systems is dedicated to providing motorised doors that allow open access from inside the home to adjoining outdoor areas. We are passionately focused on providing our customers with a solution to meet their requirements, coupled with an ongoing commitment to the quality of our products and continuous innovation and improvement.

At Smartech we sit down with the customer to discuss their specific needs and ideas and suggest the best way to achieve their vision. Our bank of experience and knowledge equips us with the skills to create the environment you have always dreamt of, while our commitment to staying abreast of rapid advances in technology has positioned us as pioneers in the door industry. With a focus on specialised applications, we stop at nothing to ensure the job is done to the customer’s satisfaction.

Quality and creativity are just two reasons why Smartech Door Systems can provide you with an innovative solution to your door needs. Call us and see what else we can do for you.

1

Moving doors with todays lifestyles

MissionSmartech Door Systems provides excellent designs and quality door systems, giving our customers the luxury of additional and versatile open space at the touch of a button. Our new designs and innovative approach have set a new benchmark in home entertainment and lifestyle.

Solutions • Entertainment areas

• Outdoor alfresco areas

• Cafes and Bars

• Outdoor decks and patios

• Garage doors

• Small entrance openings

• Sunrooms

• Showroom entrance doors

• Awning features

• Moving glass walls

• Exercise facility’s and gymnasiums

• Balconies

• Pool enclosures

• Outdoor barbecue areas

2

Moving doors with todays lifestyles

Glide-Away Folding Door

Smartech lets nothing get in your way. Glide-Away Folding Doors create a unique look once stacked in the open position. With a standard range of sizes and glass designs, we are able to provide a timely service and eliminate delay. Should your requirements sit outside our standard range however, our ability to custom design will allow us to find the solution to suit your needs. Features

• Range of glass designs• Balanced via weights• Range of powder coat colours available• Aluminium frame and tracks• Stainless steel components• Seals around perimeter and middle of frame• Ball bearing guide rollers

Finished Opening Sizes in the standard rangeHeight: 2400mm, 2700mm and 3000mm Width: 2340mm to 4900mm

Note: These sizes apply to the standard range. All widths are subject to variation depending on the choice of glass design and height required. Please consult manufacture for a Door Specifications sheet along with the code number for ordering details.

Openings

Glide-Away Folding Doors fit within the opening. Openings are to be made to the exact finished opening sizes listed in the Door Specifications Sheet to provide a snug fit at seals, smooth operation and correct tolerances. Openings are to finish square, level and true.

When designing for the Glide-Away Folding Door, check to ensure you have the required walk through height once the door is in the open position. Check data sheet for detailed information.

Door Construction

The door is made up of two folding frames attached by visually unobtrusive hinges. The frame is attached by four axles connected to running bearings that are guided within a specially extruded aluminium running guide.

Note: It is the responsibility of the designer or builder to provide adequate

fixing to carry all weight loads.

Door Frame & fittingsThe Glide-Away Folding Door frame is made from special high strength aluminium profile, and each frame designed to meet Australian Standards for Wind loads. The frame, running guides and fittings are made from the highest quality material. Most components and fittings are made from stainless steel and all aluminium surfaces are powder coated as standard.

GLIDE-AWAY FOLDING DOORS

3

Glass/Perspex

All glass that is supplied and fitted by Smartech is 6.38mm laminate safety glass as standard. Where toughened glass or Perspex is required please consult the manufacturer. If glass is not included or supplied by Smartech then it is the responsibility of the purchaser to follow procedures and to conform to AS1288 (Glazing Selection).

Note: The use of other glass or glazing material should be referred to the manufacturer due to additional weight that may or may not be required to keep the door balanced. Standard 6.38mm laminate safety glass applies for standard glass designs.

Weight Covers

Weight covers are designed to enclose weights out of harms way. Covers will wrap around, extending from the track or drive rack and returning to the wall. Locking

All Doors are fitted with slide bolt locks on each side of the lower frame, with optional motor selection no slide bolt locks will be supplied.

Note: Where doors are motorised we do not recommend the installation of any slide bolt locks as damage can occur when a motor is in operation.

Operation

The Glide-Away Folding Door is balanced between the frame weight and the weights that are attached via four axle shafts over a pulley sheave. Door movement is guided by bearings attached to the door frame, operating in the specially extruded aluminium running guides. The upper frame is attached by guide arms that help maintain the travel arc when the door is folding into the open position. Motorisation (optional)

Smartech has developed a motorisation system that is so compact and unique you won’t even notice where the motor is located. The drive spindle shaft is made from high grade stainless steel and is concealed to ensure smooth operation, offering years of travel life. A 24V DC motor turns the spindle shaft smoothly and effortlessly. Using the latest control systems, the controller knows the door position at every moment of travel. All motorised doors can be opened or closed from the touch of a button.

4

Glide-Away Tilt Doors

Smartech lets you move your way. The Glide-Away Tilt Door creates a grand entrance feel when the door moves into the open position. With a standard range of sizes and glass designs, we are able to provide a timely service and eliminate delay. Should your requirements sit outside our standard range however, our ability to custom design will allow us to find the solution to suit your needs. Features

• Range of glass designs• Balanced via weights• Range of powder coat colours available• Aluminium frame and tracks• Stainless steel components• Seals around perimeter frame• Ball bearing guide rollers

Finished Opening Sizes in the standard rangeHeight: 2400mm and 2700mm Width: 2340mm to 4900mm

Note: These sizes apply to the standard range. All widths are subject to variation depending on the choice of glass design and height required. Please consult manufacture for a Door Specifications sheet along with the code number for ordering details.

Openings

Glide-Away Tilt Doors fit within the opening. Openings are to be made to the exact finished opening sizes listed in the Door Specifications Sheet to provide a snug fit at seals, smooth operation and correct tolerances. Openings are to finish square, level and true.

When designing for the Glide-Away Tilt Door, check to ensure you have the required walk through height once the door is in the open position. Check data sheet for detailed information.

Door Construction

The door is manufactured as a single item with two axles attached that are connected to running bearings that are guided within a specially extruded aluminium running guide.

Note: It is the responsibility of the designer or builder to provide adequate fixing to carry all weight loads.

Door Frame & fittings

The Glide-Away Tilt Door frame is made from special high strength aluminium profile, and each frame designed to meet Australian Standards for Wind loads. The frame, running guides and fittings are made from the highest quality material. Most components and fittings are made from stainless steel and all aluminium surfaces are powder coated as standard.

GLIDE-AWAY TILT DOORS

5

Glass/Perspex

All glass that is supplied and fitted by Smartech is 6.38mm laminate safety glass as standard. Where toughened glass or Perspex is required please consult the manufacturer. If glass is not included or supplied by Smartech then it is the responsibility of the purchaser to follow procedures and to conform to AS1288 (Glazing Selection).

Note: The use of other glass or glazing material should be referred to the manufacturer due to additional weight that may or may not be required to keep the door balanced. Standard 6.38mm laminate safety glass applies for standard glass designs.

Weight Covers

Weight covers are designed to enclose weights out of harms way. Covers will wrap around, extending from the track or drive rack and returning to the wall. Locking

All Doors are fitted with slide bolt locks on each side of the lower frame, with optional motor selection no slide bolt locks will be supplied.

Note: Where doors are motorised we do not recommend the installation of any slide bolt locks as damage can occur when a motor is in operation.

Operation

The Glide-Away Tilt Door is balanced between the frame weight and the weights that are attached via two axle shafts over a pulley sheave. Door movement is guided by bearings attached to the door frame, operating in the specially extruded aluminium running guides. The axles are located half way down on the sides of the frame, allowing the door to pivot half in and half out of the building line. Motorisation (optional)

Smartech has developed a motorisation system that is so compact and unique you won’t even notice where the motor is located. The drive spindle shaft is made from high grade stainless steel and is concealed to ensure smooth operation, offering years of travel life. A 24V DC motor turns the spindle shaft smoothly and effortlessly. Using the latest control systems, the controller knows the door position at every moment of travel. All motorised doors can be opened or closed from the touch of a button.

6

7

Glide-Away Uplift Doors

Smartech lets you move up. The Glide-Away Uplift Door moves vertically to the open position. With a standard range of sizes and glass designs, we are able to provide a timely service and eliminate delay. This design is used for high ceiling applications where it is possible to have the door lifting vertically behind the wall.

Features

• Range of glass designs• Balanced via weights• Range of powder coat colours available• Aluminium frame and tracks• Stainless steel components• Seals around perimeter of frame• Ball bearing guide rollers

Finished Opening Sizes in the standard rangeHeight: 2400mm, 2700mm and 3000mm Width: 2340mm to 4900mm

Note: These sizes apply to the standard range. All widths are subject to variation depending on the choice of glass design and height required. Please consult manufacture for a Door Specifications sheet along with the code number for ordering details.

Openings

Glide-Away Uplift Doors fit behind the opening. It is recommended that the opening is true and plumb. When designing for the Glide-Away Uplift Door, check to ensure you have the required ceiling space for when the door is in the vertically open position. Check data sheet for detailed information.

Door Construction

The door frame is manufactured as a single item with four axles attached that are connected to running bearings that are guided within a specially extruded aluminium running guide.

Note: It is the responsibility of the designer or builder to provide adequate fixing to carry all weight loads.

Door Frame & fittings

The Glide-Away Uplift Door frame is made from special high strength aluminium profile, and each frame designed to meet Australian Standards for Wind loads. The frame, running guides and fittings are made from the highest quality material. Most components and fittings are made from stainless steel and all aluminium surfaces are powder coated as standard.

GLIDE-AWAY UPLIFT DOORS

Glass/Perspex

All glass that is supplied and fitted by Smartech is 6.38mm laminate safety glass as standard. Where toughened glass or Perspex is required please consult the manufacturer. If glass is not included or supplied by Smartech then it is the responsibility of the purchaser to follow procedures and to conform to AS1288 (Glazing Selection).

Note: The use of other glass or glazing material should be referred to the manufacturer due to additional weight that may or may not be required to keep the door balanced. Standard 6.38mm laminate safety glass applies for standard glass designs.

Weight Covers

Weight covers are designed to enclose weights out of harms way. Covers will wrap around, extending from the track or drive rack and returning to the wall. Locking

All Doors are fitted with slide bolt locks on each side of the lower frame, with optional motor selection no slide bolt locks will be supplied.

Note: Where doors are motorised we do not recommend the installation of any slide bolt locks as damage can occur when a motor is in operation.

Operation

The Glide-Away Uplift Door is balanced between the frame weight and the weights that are attached via the top two axle shafts over a pulley sheave. Door movement is guided by bearings attached to the door frame, operating in the specially extruded aluminium running guides. There are two axial shafts on each side of the frame, one near the top of the frame and one on the lower part of the frame, allowing the door to lift up and down vertically. Motorisation (optional)

Smartech has developed a motorisation system that is so compact and unique you won’t even notice where the motor is located. The drive spindle shaft is made from high grade stainless steel and is concealed to ensure smooth operation, offering years of travel life. A 24V DC motor turns the spindle shaft smoothly and effortlessly. Using the latest control systems, the controller knows the door position at every moment of travel. All motorised doors can be opened or closed from the touch of a button.

8

9

Standard Glazing Designs

Folding-GL Folding-HL Folding-HLE Folding-OSMLL

Folding-SL Folding-SLE

Tilt-GL, Uplift-GL Tilt-HL, Uplift-HL Tilt-HLE, Uplift-HLE Tilt-OSMLL, Uplift-OSMLL

Tilt-THL, Uplift-THL Tilt-SLE, Uplift-SLE Tilt-SL, Uplift-SL Tilt-TSL, Uplift-TSL

Note: The standard finished opening heights are 2400mm, 2700mm, and 3000mm

All door frames are manufactured smaller to suit. Openings must be made to the exact finished opening size, refer to the Door Specifications sheet for sizes listed, to ensure good snug fit at seals, smooth operation and correct tolerances. Openings are to finish square, level and true.

Standard size range varies for each door design, and determines by size in height and width, please consult manufacture for Door Specifications sheet, along with the code number ordering details.

Disclaimer: Images are for illustration purposes only and may not accurately represent the product due to the design configuration, application and glazing design for each opening size.

10

With built-in German motor Safe and reliable with modular counterweights and all new drive system The compact motor now reduced in size allows it to be installed even where space is at a premium. Compact and technologically advanced, they feature a modular counterweighted balancing system with a strong cable system, ensuring a high level of operation and safety, as well as a programmable controller system to set open and close end positions. It has been designed in order to produce a very practical, aesthetically pleasing to simplify installation and to allow all the components to be easily operated. The motor, by operating at the lowest possible power, prolongs the operating life of the automation. Compact, sturdy and reliable, they are suitable for any residential or commercial premises.

Quick and easy to installThe aluminium tracks, located on the vertical uprights, ensures the door to be easily and quickly fitted, thus making the installation stage much easier. The counterweight covers also houses and protects counterweights and all the drive parts. The quick wiring if required, makes the installation quick and simple and also ensures the electrical connections are carried out correctly. All Items except key switches are

plug and play wiring system.

Clever design, compactVery stylish, practical yet Uncompromising on quality. Safety, Technology and Environmental Protection focusing on basics, low maintenance and environmental protection. Our doors are available in different designs which, with growing levels of fittings and accessories, make them suitable for different operating requirements and industry standards, still ensuring the highest level of safety when the door is used responsibly. It is also a responsible choice for the environment. In fact, the automation boasts all the components required for the type of installation without any unnecessary technical features, leading to a major reduction of maintenance costs.

Accessories & Controller

Hand Switch Open/Close Hand Switch Open/Close Digital

End Position Programming Device Main Programmable Controller

Smartech the smarter choice by design

Smarter Bottom Seal Smarter Connections Smarter Hinges Smarter Locking

Smarter Drive System Smarter Track Seals Smarter Frame Seals

Smartech Door Systems has the solution for you, when it comes to creating more open space or allowing

natural environments to flow through, it only takes a touch of a button to have your wall open.

Available From

MELBOURNEBRISBANE

SYDNEYPERTH

ADELAIDE

Head Office & Production Facility 9 Production Road, Melton, Victoria 3337

Phone (03) 9747 9233Mobile 0403 321 840Fax (03) 9747 9448Email sales@smartechdoorsystems.com.auWeb www.smartechdoorsystems.com.au

W I N D O W SY S T E M S