GLC 4400 Automatic Lubrication System Controller - Gracofile/GLC4400... · Multi-Purpose Controller...
Transcript of GLC 4400 Automatic Lubrication System Controller - Gracofile/GLC4400... · Multi-Purpose Controller...
GLC 4400Automatic Lubrication System
Controller
Introducing the All New GLC 4400
G = Graco
L = Lubrication
C = Controller
4400 = 4 inputs and 4 outputs forhundreds of applications
What is in a name?
Introducing the All New GLC 4400Multi-Purpose Controller for Automatic Lubrication
Versatile enough to control single line resistive andparallel, series progressive and dual line systems –one controller for all applications!
Customize your lubrication cycle using time,pressure, cycle and machine counts for maximumprecision and productivity
Simple icon- and menu-based user interface makesprogramming and operation easy - saving valuabletechnician time
Quick Cycle mode for efficient setup and inspectiontime – also saving valuable technician time
Rugged and weatherproof, IP 69K protection – forlong life and dependability
The Applications are Endless!!!
GLC 4400 Does the Work of Several
TC-1000LC-1000
115123
Lincoln
GLC 4400 Inputs and OutputsMix, Match and Customize the Inputs and Outputs for
Maximum Flexibility and Functionality!!!
Benefit:
• Pump On – Controlled by pressure or cycle switch –fault alarm capable – minimize pump on time
• Pump Off – Controlled by machine count switch – faultalarm capable – tailors lube cycles to actual machineuse
• Low Level Indication – provides low level fault alarm onGLC 4400 display and optional remote fault alarm
• Remote Manual Run Switch – provides option ofmounting a convenient manual run switch where youneed it
Benefit:
• Pump Control Signal – controls solenoid orpowers actual pump electric motor up to 10amps for 24 VDC and 120 VAC
• Low Level Alarm Signal – remote mount alarmlight or horn or patch into PLC
• Pressure/Cycle Alarm Signal – remote mountalarm light or horn or patch into PLC
• System OK – remote mount alarm light or patchinto PLC – normally closed
GLC 4400 User Interface
Other Interface Features:• Adjust brightness with right and left arrows
• Adjust contrast with up and down arrows
• Tactile feedback on buttons
• Enter setup menu by pressing and holding
the button for 3 seconds
• Enable a manual run lubrication cycle bypressing the right and left arrowssimultaneously
• Operating temperatures including the heatedLED display ranges from –40º F to 145º F (–40ºC to 63 º C)
GLC 4400 is Menu- and Icon-BasedSetup screen has 7 easy to navigate
programmable operation modes
GLC 4400 Set Up Screens – Pump On
GLC 4400 Set Up Screens – Pump Off
GLC 4400 Set Up Screens – Power Up
GLC 4400 Set Up Screens – Pulsed
GLC 4400 Set Up Screens – Pin Code
GLC 4400 Set Up Screens – Display
GLC 4400 Set Up Screens – Quick Cycle