Glaze for Light Colours - Wyatt · sdlk jslk ksv kl v Related Products Advanced Liquid Compound...
2
Farécla Products Ltd | +44 (0) 1920 465 041 | [email protected] | www.farecla.com Glaze for Light Colours Product Description Glaze is a final finishing product with excellent filling capabilities for minor scratches and swirls. It gives the ultimate showroom finish that is durable as well as breathable. Product Information 1 litre (34 fl.oz.) Size FGL-1050 Code 6 Ctn Qty Technical Information Appearance: White coloured liquid Viscosity: Low - medium viscosity VOC Content: 32.736% of total product Relative Density: 1.05 pH: 7.5 Paint Type Compliance: All paint types • Water Resistant Exhibits water repellant properties, allowing a surface to be cleaned straight aſter Glaze has been applied • Fast to Finish Job Glaze allows paint to breathe if it has not fully cured and can be applied earlier than waxes, reducing work time and saving money • Restores Brings colour back to discoloured paints whilst achieving a glossy finish • One Application Quickly provides a high gloss finish with no need to re-apply Key Benefits LIT1702 (V1 08-2012)
Transcript of Glaze for Light Colours - Wyatt · sdlk jslk ksv kl v Related Products Advanced Liquid Compound...
Farécla Products Ltd | +44 (0) 1920 465 041 | [email protected] | www.farecla.com
Glaze forLight Colours
Product Description
Glaze is a �nal �nishing product with excellent �lling capabilities for minor scratches and swirls. It gives the ultimate showroom �nish that is durable as well as breathable.
Product Information
1 litre (34 �.oz.)
Size
FGL-1050
Code
6
Ctn Qty
Technical Information
Appearance: White coloured liquidViscosity: Low - medium viscosityVOC Content: 32.736% of total product Relative Density: 1.05pH: 7.5Paint Type Compliance: All paint types
• Water ResistantExhibits water repellant properties, allowing a surface to be cleaned straight a�er Glaze has been applied
• Fast to Finish JobGlaze allows paint to breathe if it has not fully cured and can be applied earlier than waxes, reducing work time and saving money
• Restores Brings colour back to discoloured paints whilst achieving a glossy �nish
• One Application Quickly provides a high gloss �nish with no need to re-apply
Key Bene�ts
LIT1
702
(V1
08-2
012)
formula
Technical Info.
Place holder text xaiochjsdojcsjoscslcnlsvn kc l ks slsslcn slm sli slkncklsslk cnslinlsk lsjlcsl sclj sjl ls lksjclksjc ljn scvl jsdlk jslk ksv kl v
Related Products
Advanced Liquid Compound
Ultra
Product Information
Product CodeG3U-XXXXG3U-XXXXG3U-XXXX
Product Size450ml (xxx�.oz)900ml (xxx�.oz)1 gallon (xxx�.oz)
Carton Quantityxxxxxx
Product Description
G3 Ultra is the fastest compound for thepermanent removal of up to P1200 sanding marksleaving a superior high gloss �nish. For use on allmodern paint systems, fresh or cured includingScratch Resistant Clears.
Features & Bene�ts
Removes scratches permanently – no �llers – no comeback from customersThe fastest system to achieve a high gloss – increased throughputDry use compound – no need to use water – less mess and easierclean upCan be used on all modern paint systems – one product for all – saves moneySilicone free
Contains Advanced G3 System now o�ers more cut and a higher gloss �nish than ever before. For sheer all-round performance on paintwork defects. Use with water.
Pro
du
ct I
ma
ge
Use With
6” Dry UseCompounding FoamG3U-XXXX
6” G3 Ultra Back PlateG3U-XXXX
Farécla Finishing clothFC-3
Farécla “I Can’t Believe its not Water”G3-XXXX
QR Code Fluid Dynamic Technology
CodeG3U-XXXXG3U-XXXXG3U-XXXXG3U-XXXX
G3U-XXXX
ProductUltra 450ml (xxx�.oz)Ultra 900ml (xxx�.oz)Ultra 1 gallon (xxx�.oz)6” Dry Use Compounding Foam6” Ultra Back Plate
Ctn QtyXXXXXXXX
XX
Product Information
Farécla Products Ltd | +44 (0) 1920 465 041 | [email protected] | www.farecla.com
Use With
Hand Application
Farécla Finishing ClothFC-3
Farécla Finishing ClothFC-3
How To Use
*It is always recommended to test on an inconspicuous area prior to general use
G Mop 6” AdvancedBack PlateAGM-BP14 (14mm)AGM-BP58 (5/8”)
G Mop 6” Advanced Polishing FoamAGM-PF
Machine Application
Rub compoundon surface usingFinishing Cloth
FC-3 (cloth)
2
Wipe clean withFinishing Cloth
FC-3 (cloth)
3
SHA
KE POU
R
Shake bottle welland apply a smallamount to surfaceor clothFGL-1050 (1 ltr)
1
SHA
KE POU
R
Shake bottle welland apply a smallamount to surfaceor foamFGL-1050 (1 ltr)
2
Attach pad topolisher and kneadAGM-BP14 (back plate)AGM-PF (foam)
1
ATTACH
Wipe clean withFinishing ClothFC-3 (cloth)
4
Spread on surfaceand compoundat 1500 - 1800rpmuntil marks havebeen removed
3
1500 - 1800rpm
Machine Application
Hand Application
LIT1
702
(V1
08-2
012)
