www.glastic.com

Glastic Standoff InsulatorsGlastic Standoff InsulatorsHi-Pot Tested to Assure Electrical ReliabilityGlastic Standoff Insulators are molded of Underwriters Laboratories Incorporated (UL) Recognized flame resistantfiberglass-reinforced thermoset polyester molding compound. Glastic Insulators 1603, 2015, 1461,1872,1642 and 2450 areUL Recognized according to UL Standard for Safety 891.

They feature shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moistureand heat-resistance properties of Glastic Insulators are higher than those of conventional plastic insulators.

Voltage RatingThis is only meant to be a guide for indoor service. Insulators mounted within a suitable electrical cabinet are consideredindoors even though the cabinet itself is outdoors. An insulator will withstand its rated voltage continuously but industrystandards or other specifications may require a different spacing from conductor to ground for a particular voltage. Wet ordirty conditions may require derating an insulator.

Outdoor UseGlastic Insulators are primarily intended to be used indoors or inside a suitable enclosure. Insulators 1642 and 2450should not be used upside down if there is a possibility of the center hole filling with water.

UL RecognitionAll Glastic Insulators are molded from UL Recognized molding materials (UL File E23525). When submitting yourequipment to UL, you may need to furnish the molding material grade number used for a particular insulator. Thisinformation is available from Glastic Corporation. All of the molding materials used in Glastic Insulators have a genericrelative Thermal Index of 130 C Electrical/130 C Mechanical. Glastic 1603, 2015, 1461,1872,1642 and 2450 Insulatorsare UL Recognized according to UL standard for Safety 891 (UL File E81713).

ENGINEERED COMPOSITE SOLUTIONS

SEITREPORPLACIRTCELEDNALACISYHP

SELYTS

SEULAV 5612 A2-3061 D2-3061 5102 1641 2781 1-5302 E-01-2461 51-0542

).sbl(htgnertSelisneT 0001 000,2 0052 000,2 000,3 005,2 005,2 000,3 000,5

).sblhcni(htgnertSrevelitnaC 004 005,1 008,1 057,1 005,3 000,3 006,3 000,6 000,01

).sbl(htgnertSnoisserpmoC 0008 000,02 000,02 000,02 000,06 000,52 000,52 000,02 000,02

).sbl.tf(htgnertSeuqroT 21 52 03 05 05 05 ---- 002 582

).ces(ecnatsiseRcrA 081 081 081 081 081 081 081 081 081

ecnatsiseRemalF49tcejbuSLU O-V49 O-V49 O-V49 O-V49 O-V49 O-V49 O-V49 O-V49 O-V49

).ni(ecnareloTthgieH 510. 510. 510. 510. 510. 510. 510. 010. 510.

).ni(ecnatsiDpeerC rotalusnI thgieH 8/5-1 8/5-1sulP4/1rotalusnI

thgieH4/1-3

sulP61/5rotalusnI

thgieH2/1-3 61/11-3 7

.scepSAMEN)stlov(toP-iHyrD ---- ---- ---- ---- ---- ---- ---- 000,91 000,63

.scepSAMEN)stlov(toP-iHweD ---- ---- ---- ---- ---- ---- ---- 000,51 000,62

)evaw04x5.1,stlov(eslupmI ---- ---- ---- ---- ---- ---- ---- 000,06 000,59

)setunim(ecnatsiseRkcarT 006 006 006 006 006 006 006 006 006

Glastic Standoff Insulators

SNOISNEMID

.ONTRAP THGIEH EZISDAERHT ROODNIDETSEGGUS GNITAREGATLOVLACIRTCELEEMITTROHS

VkHTGNERTS DNUOPTHGIEW

A1-5612B1-5612A2-3061D2-3061A1-5102A2-5102

''1''4/1-1''8/3-1''8/3-1''2/1-1''2/1-1

PEED''61/5X02X''4/1PEED''61/5X02X''4/1

PEED''8/3X61X''8/3PEED''8/3X61X''8/3PEED'2/1X02X''4/1

PEED''61/7X81X''61/5

00600600600600510051

6.81----0.010.014.334.33

60.060.091.091.002.091.0

A3-5102B2-5102B3-5102C2-5102C3-5102

''2/1-1''4/3-1''4/3-1

''2''2

PEED''8/3X61X''8/3PEED''61/7X81X''61/5

PEED''8/3X61X''8/3PEED''61/7X81X''61/5

PEED''61/9X61X''8/3

00510002000200320032

4.33--------1.341.34

02.052.052.003.013.0

C4-5102D3-5102D4-5102A1-1641B1-1641

''2''4/1-2''4/1-2''8/1-2''8/1-2

PEED''8/5X31X''2/1PEED''61/9X61X''8/3

PEED''8/5X31X''2/1PEED''61/9X61X''8/3

PEED''8/5X31X''2/1

00320072007200520052

1.34--------3.949.72

03.063.063.016.016.0

C1-1641A1-2781A2-2781F3-2781B1-2781

''8/1-2''2/1-2''2/1-2''8/5-2''4/3-2

PEED''8/5X11X''8/5PEED''61/9X61X''8/3

PEED''8/5X31X''2/1PEED''61/11X11X''8/5

PEED''61/9X61X''8/3

00520023002300430063

0.124.154.15--------

16.044.054.006.035.0

B2-2781C1-2781C2-2781D1-2781D2-2781

''4/3-2''3''3

''4/1-3''4/1-3

PEED''8/5X31X''2/1PEED''61/9X61X''8/3

PEED''8/5X31X''2/1PEED''61/9X61X''8/3

PEED''8/5X31X''2/1

00630014001400540054

--------------------

15.095.006.076.076.0

E1-2781E2-2781E3-27811-5302

E01-246151-0542

''2/1-3''2/1-3''2/1-3''2/1-3''2/1-3

''6

PEED''61/9X61X''8/3PEED''8/5X31X''2/1PEED''61/11X11X''8/5

ELCRICTLOB''2ELCRICTLOB''2PEED''61/9X61X''8/3ELCRICTLOB''2PEED''61/9X61X''8/3

00050005000500050005000,51

2.552.552.55--------___

67.085.047.002.187.194.3

All of the information, suggestions, and recommendations pertaining to the properties and uses of the Glastic products described herein are based upon tests and data believed to be accurate; however, the final determination regarding the suitability of anymaterial described herein for the use contemplated, the manner of such use, and whether the use infringes any patents is the sole responsibility of the user. THERE IS NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Under no circumstances shall we be liable for incidental or consequential loss or damage.

Glastic is a registered trademark of Glastic Corporation. UL is a registered trademark of Underwriters Laboratories, Inc. 2002 Glastic Corporation. All Rights Reserved. Printed in USA GL-1080A 0602

GLASTIC CORPORATION4321 Glenridge Road | Cleveland, OH 44121-2891 | phone 216-486-0100 | toll free 800-360-1319 | fax 216-486-1091 | www.glastic.com

SERIES 2165PANEL AND

SWITCHBOARD INSULATORS

1-1/8

1 (part 2165-1A)

1-1/4 (part 2165-1B)

(1603-2A)(1603-2D)

1603-2A STD.1603-2D WIDE

600 VOLT HIGH STRENGTHSTANDOFF INSULATOR

5/83/4

1-3/8

1-3/81-3/4

SERIES 2015CENTER-POST INSULATORS

2

21/32

21/32

1-1/4

see

tabl

e fo

r hei

ght

SERIES 1461APPARATUS

STANDOFF INSULATORS

2-1/2

2-1/8

SERIES 1872CENTER-POST INSULATORS

2-1/2

1-1/8

1-1/8

1-1/2

see

tabl

e fo

r hei

ght

PART NO. 2035-1A FRAME INSULATOR

3-1/2

3-1/2

2-1/2

2

5-1/8 betweenbolt centers PART NO. 1642-10-E5KV STANDOFF INSULATORMeets the requirements specified for

a 4.8KVA-20 Indoor Insulator perNEMA SG-6-1995.

3-1/2

3-1/2

6

4-3/8PART NO. 2450-15

15KV STANDOFF INSULATORMeets the requirements specified fora 13.2KVA-20 Indoor Insulator per

NEMA SG-6-1995.