Glassware Calibration-Conical Flasks
of 2
description
Calibration
Transcript of Glassware Calibration-Conical Flasks
-
Owner:Quality Management RepresentativeERI-QR-07-01Date: 01.05.2015
Page 1 of 1 Copy Rghts Reserved By ERI
IN-HOUSE CALIBRATION CERTIFICATE
Equipment Type Certificate No.Size Performed ByReference No. Cal. DateManufacturer Cal. Due Date
Calibration Procedure : Name
Ref. No.Cal. Due Date
Calibration Performed By : Approved By :Nizam Uddin Gayan Priyankara
QA/QC Engineer
Standards Used to Calibrate the Equipment
-
Owner:Quality Management RepresentativeERI-QR-04-01Date: 01.05.2015
Page 1 of 1 Copy Rights Reserved By ERI
Equipment Type Certificate No.Size Performed ByReference No. Cal. DateManufacturer Cal. Due Date
Calibration Procedure : ASTM E542 & E1404Name
Ref. No.Cal. Due Date
Air Temperature C Water Temperature CAir Pressure mmHg Relative Humidity %
Glassware MaterialCallibration Method
To ContainClass To Deliver
Specified ValuesOverall Height mmBody OD Widest Point mmMinimum Graduation mLMaximum Graduation Subdivision mL
Trial No. Z Tolerance Remarks
Average
Note :
Calibrated By:
RAW DATAFOR ALL LABORATORY TEST AND IN-HOUSE CALIBRATION
Standards Used to Calibrate the Equipment
Nominal Volume
(mL)
Initial Weight of Flask (g)
IE
Loaded Weight of Flask (g)
IL
IL- IEV20 (mL)
V20 = ( IL- IE) Z
Cal. ReportCal. Worksheet
