glass balustradesI N S T A L L A T I O N I N S T R U C T I O N S

Glass balustrades for public premises and homes

Stylish full glass balustrades make for showy pillarless glass railings for indoor and outdoor applications. Balustrade pro-files can be fastened at the bottom or at the sides.

The profile also facilitates installation of curved balustrades. The balustrades can be used on landings or along staircases in private and public premises.

Profiles can be coated in any RAL colour, and there are many tint options for glass used in the balustrade. The range of handrail designs is extensive as well.

Glass balustrades for public premises and homes

The length of the glass balustrade is measured to match the landing’s edge. When dimensioning the balustrade consider any possible structures and other aspects affecting the distribution of glass panes.

Check for any height variations of the landing and find the highest and the lowest spot. Also measure all angles other than 90˚ angles.

In case of recess mounted glass balustrades check the recess depth and the space for the ba-lustrade’s frame, if the structure is fastened from the top. If the balustrade is fastened at sides, check the straightness of the landing edge and the condition of the edge moulding.

Report any detected measurement deviations to the customer and ask the customer to remedy the measuring errors. Appoint a person in charge and set a schedule for making the repairs.

INSTALLATION INSTRUCTIONS

Glass balustrades D10 and D30 are pillarless full glass balustrades supported at the bottom.

This product is intended for upright mounting according to the installation instruction. If the balustrade is installed askew, the error at the top edge of the glass pane will be multiplied. Therefore the glass balustrade must always be mounted upright.

In outdoor applications it is recommended to leave an about 3 mm gap after every 3 meters in order to control heat expansion.

INSTALLATION INSTRUCTIONS

DIMENSIONING OF THE 45˚ AND 90˚ ANGLE OF THE GLASS BALUSTRADE When dimensioning a 45˚ glass balustrade angle check the alignment along the entire span, make sure that the balustrade is fastened to the landing well enough and that the miter stays closed. The first frame profile fastening point must be at ca 50–100 mm from the miter.

Glass balustrade installation is easy and swift. Glass balustrades create uniqueness and poise, and give the room a feel of space and light.

Glass balustrades are delivered as components or fully mounted. Appropriate for a number of different appli-cations. Ask our sales staff for more information!

SCANMIKAEL OYSepänpellontie 2b, 28430 Pori, Finland

Tel. +358 2-8377 9000info@scanmikael.com | www.scanmikael.com

Showroom: Duuri Oy | Tapulikaupungintie 35 | 00750 Helsinki, Finland