Glamox DALIYou define. We connect.

2 3

Light management systems for the future

Glamox DALI is part of the Glamox Light Management Systems portfolio. Below you can read about some of the advantages associated with our systems.

A light management system from Glamox is a beneficial choice, whether you are the end user, the building owner, the installer, the facility manager or the consultant. Our solutions are:

Easy to plan

On your local Glamox website you will find a LMS solution guide. Here you can find LMS solutions for different applications in your segment along with

suggestions for floor plans and lists of the components you need with their article numbers. LMS is also an

integrated part of our light calculation tool. This ensures detailed and accurate LMS documentation

that is updated when changes are made in the plans for the light installation.

Easy to commission

We want you to feel confident when you select a LMS system from us. By

using Glamox commissioning services, you are granted that we take full system

responsibility for the total lighting solution. The commissioning is done by highly competent system integrators that are

trained in the Glamox systems.

Easy to use

When designing our light management systems, we have put high emphasis on creating intuitive user interfaces. Most of the time the end user will experience our light management system as “Invisible technology” that allows the lighting

to adapt to their needs.

Connecting things that matter

Glamox is following the technological trends closely, and will consecutively implement

the most relevant IoT technology, that gives real value. We want to ensure that the best

technology is always available to our customers.

A warranty for quality

We provide a safe choice. Our solutions are tested for compatibility in our laboratory.

70 years in the lighting industry has helped us build a lot of competence and taught us the value of quality. This is one of the reasons why we only work with the best suppliers

and partners.

Flexible

With programmable, addressable luminaires and control gear, a solution

can easily be adapted to new needs without doing physical changes to the installation.

Easy to install

By using established standards and technologies that are well known to the installers, we pave the way for

a problem-free installation.

4 5

We can guarantee that all components will function as specified and that they are compatible with all our DALI luminaires. This allows us to offer a five year system warranty. If something should go wrong, you don’t have to worry about who’s responsible. As a supplier of the complete light installation we will take full system responsibility.

Multiple Group Glamox DALI is part of our Multiple Group solution and is a flexible and versatile system that allows you to control multiple groups of luminaires. This is an ideal solution for one or several rooms where you want to divide the luminaires into separate groups. A Multiple Group system from Glamox comprise programmable solutions that allows you to easily adjust the light according to the needs of the end users.

Single Group Multiple Group Central Monitoring

Why choose Glamox DALI?

What is DALI?

With Glamox DALI we offer you a safe and well-proven solution. The system consists of DALI components that are thoroughly tested both individually and combined as a system.

A worldwide standard in lighting controlDALI = Digital Addressable Lighting Interface is a trademark for a digital, network-based system for light control. The underlying technology was established by a consortium of lighting equipment manufacturers in 1997 – 98 as an open standard. The technical standard is IEC 62386. You can find an overview of the standard on page 18.

A dynamic standardThe DALI standard and protocol has been expanded several times when new devices have been included as new part numbers in the standard. Each new device has also been given a new device type number (DTx). Important updates have been, Emergency light (part 202; DT1), LED drivers (Part 207; DT6) and colour/Tuneable white control (Part 209; DT8).

General technical system data• Up to 64 addresses, 16 groups and 16 scenes• Up to 250mA on the BUS• Up to 300 metres standard installation cable or maximum 2Volt

signal drop on the cable

The next generationDALI version 2 is a new step in the development of the standard. In the new version, control and input devices will be included. DALI-2 also adds a lot of new functionality to existing devices. As opposed to DALI version 1, DALI-2 involves independent verification of test results, not only a self-declaration.

6 7

Applications using Glamox DALICommon challenges

Entrance area with reception

A common requirement for entrance areas is to have the light go on/dim up one hour before normal opening hours. That way the office welcomes even the first occupants in the morning.

Open-plan office

For an open-plan office, it is important to focus on safety and comfort as well as energy efficiency. When working alone in the office it is important that you feel safe and comfortable. Even if the lux level on your work station is adequate, it is not very user oriented if your surroundings are left in total darkness. To have the possibility to dim the light level in a large open area is always a relevant feature.

Control room without daylight

In a room with no natural light, it is beneficial if the colour temperature and intensity of the light can be adjusted throughout the day. This is a way to simulate the cycle of daylight and is often referred to as Human Centric Lighting (HCL). HCL will help the workers maintain a good daily rhythm, stay focused during the shift and prevent sleep disturbances.

Stairwell

The staircase should always be illuminated when there are people present in the building.

Find o

ur rec

ommen

ded

soluti

on on

page

8-9

DALI

230 V

DALI

230 V

DALI

230 V

230 V

DALI

8 9

Applications using Glamox DALIOur recommendation

Entrance area with reception

RTC timer + Sequencer + Sensor-R

The RTC timer turns on the reception and outdoor lights in the morning. The RTC timer and the sequencer start a light sequence at lunch and another one at the end of the work day.

Open-plan office

Sensor-R + cross-switch

Divide the landscape into sensor control zones. Light management can be based on presence, daylight detection or a combination. NB: We recommend to avoid placing the daylight sensors too close to the windows.

Control room without daylight

CCT-timer + Sensor-R

The CCT timer allows you to design a daily cycle that changes the colour temperature and intensity of the light to imitate daylight. NB: Requires luminaires with CCT.

Stairwell

Sensor-S + Repeater

Use long delay time on sensors to ensure that the light will remain on during a normal work day. Ordinary DALI communication has a limit of approximately 300 metre cable. If you need more than this, you can use a repeater that amplifies your signal.

DALI/USB GatewayPower Supply

COMMISSIONING SET-UP230 V

DALI

PC

10 11

Meeting room

A meeting room can be used for several different purposes that require different light scenarios, like official meetings, video conferences and social events. Even the cleaning staff may benefit a customised light setting.

Corridor

When a corridor is located close to a work area, the light level changes should be slow/soft and kept to a minimum to avoid disturbing people working. The corridor should always be illuminated when there are people in the work area.

Cell office

For a cell office, it’s very important that the light level isn’t influenced by people passing by. We also recommend that the end user has an option to manually override the default sensor settings.

Industry

Divide the plant into sensor control zones. Light management can be based on presence, daylight detection or a combination. NB: We recommend to avoid placing the daylight sensors too close to the windows.

Applications using Glamox DALICommon challenges

Find o

ur rec

ommen

ded

soluti

on on

page

12-1

3

DALI

230 V

DALI

230 V

DALI

230 V

DALI

230 V

12 13

Cell office

Sensor-R + Cross-switch / wireless cross-switch

In addition to sensor management, it is often desirable to have the option to override the default level. This is done by using a switch to either dim up/down or set a pre-programmed level. By using a wireless switch, the light can easily be controlled from the work station.

Applications using Glamox DALIOur recommendation

Corridor

Sensor-R

The light in the corridor is set to a standby level of 50% when there is presence in the work zones close to the corridor. We recommend using longer fade time than default.

Industry

Sensor-S + Expander

In a large industrial area, you will soon exceed the maximum number of addresses on a DALI loop (max 64). You can expand the DALI bus by using DALI Expanders. Each expander can have up to 64 luminaires.

Meeting room

Sensor-R + BT panel + Relay

In the meeting room, you want to be able to set different scenarios, depending on the use. By using a relay module, you can also control the canvas/blinds. Everything can be controlled from your mobile since the panel has a Bluetooth interface.

DALI/USB GatewayPower Supply

COMMISSIONING SET-UP230 V

DALI

PC

14 15

Glamox DALI products

Item number: B25005003DALI EXPANDERAllows you to control multiple DALI devices using one DALI address. Multiple devices form a DALI sub-group, controlled by the address of the DALI Expander using Broadcast.

Item number: 86458401DALI REPEATER RAILAmplifies the DALI signal and enables communication on the DALI bus beyond the requirement of max 300 metre cable.

Item number: B25007001DALI/USB GATEWAYA PC-USB interface module for DALI systems. This interface provides access to addressing, programming and managing DALI installations from a PC.

Item number: B25004002DALI PIR CLS SEN-RDALI PIR and light sensor. Time delays and presence/absence levels can be programmed freely. Integrated «Constant Light System». For recessed ceiling mounting.

Item number: B25004001DALI PIR CLS SEN-SDALI PIR and light sensor. Time delays and present / absence levels can be programmed freely. Integrated «Constant Light System». For ceiling mounting.

Item number: B25003001DALI DT8 SMThe switch module acts as an interface for connecting 4 standard push-to-make switches to a DALI network. Each switch can be individually programmed.

Item number: B25002002DALI SM CROSS WHSwitch panel with 4 switches for individual programming.Wireless version has item number 86459541-W + T

Item number: B25002001DALI PANEL BTA DALI touch panel with built-in Bluetooth for mobile user interface. Layout and the number of switches can be customised. Each switch can be individually programmed.

Item number: 86459582DALI SEQUENCERA controller that assembles DALI commands into a sequence. Memory for 4 sequences. The sequence can be set in loop.

Item number: B25006001DALI RM16 RAIL16 Amp Relay module for high inrush current. Using a changeover switch. For mounting on DIN rail.

Item number: B25001001DALI PS 250mA RAIL250mA DALI power supply for DIN rail mounting.

Item number: B25009002DALI CCT TIMERUsed to make daytime cycles based on the change of both light level and colour temperature on a DALI DT8 luminaire. The component has a built-in real-time clock.

Item number: 86458675-HSDALI RM8 HS16 Amp Relay module for high inrush current. For mounting on DIN rail.

Item number: B25001002DALI PS 250mA C_ANCH250mA DALI power supply for free mounting. Cable clamp is included.

Item number: 86459531DALI RTC TIMERThis module offers a week-based scheduler for starting a chain of different DALI commands. The scheduler is based on a real time clock.

Item number: 86458675DALI RM88 Amp Relay module for mounting in wall/ceiling box.

Item number: B25001003DALI PS 30mA30mA DALI power supply for wall/ceiling box mounting.

On the following pages, you will find an overview of Glamox DALI products that we currently have in our assortment. We follow the development of the DALI technology and standard closely and will update our product assortment continuously. Please check our homepage for the latest updates.

SENSORSREPEATERS

EXPANDERS

PANELS

SWITCH MODULES

TIMERS

SEQUENCERSRELAY MODULES POWER SUPPLY

16 17

DALI Cockpit software

Intuitive software tool for DALI system configuration and DALI line traffic monitoring.

DALI Cockpit software contains features like:

• Configuration of Glamox DALI components • Configuration of standard DALI ballasts and control gears • Addressing DALI-systems • Group building • Scene generation • Monitoring and recording DALI line traffic • Making macros (command-over-time)

Glamox DALI as central monitoring LMS DALI4Net

Glamox LMS DALI4Net.DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices. The LMS DALI 4Net has a multi-master capability, allowing several Glamox DALI control devices on each DALI line. Efficient scaling is possible with external DALI bus supplies. Further functions are: cross line control functions for sensors, real time clock, scheduler and emergency monitoring.

The 4 DALI lines and the connected control devices can be configured via Ethernet with the DALI Cockpit Software. Using the Modbus TCP interface, the DALI 4Net can be accessed for control and monitoring or connected to a building control system.

Emergency

Glamox can offer a complete solution for emergency light installations. Our emergency lights are according to DALI DT1. DALI DT1 is an emergency light control gear that starts and monitors emergency test sequences based on the international standard IEC 62386 Part 202.

18 19

IEC 62386 The international standard for DALI technology

IEC 62386, the international DALI standard, is published in multiple Parts by the International Electrotechnical Commission (IEC).

The table below shows the status of different Parts of IEC 62386. Parts in cursive were still in progress when this brochure was printed. IEC working group (WG11 of TC34) is responsible for writing and maintaining IEC 62386.

So, what is DALI-2 then. DALI-2 is based on version 2 of IEC 62386, which also, for the first time includes control devices. Most parts of the DALI-2 is published but some parts are missing a proper test sequence in order to start the certification process for the product.

General requirements - System components

General requirementsControl Gear

*

* ******

******

*

*General requirementsWireless and alternative wired systems

Particular requirementsControl Gear

Part 201: Fluorescent lampsPart 202: Self-contained emergency lightPart 203: Discharge lamps (excluding fluorescent lamps)Part 204: Low voltage halogen lampsPart 205: Supply voltage controller for incandescent lampsPart 206: Conversion from digital signal to DC voltagePart 207: LED modulesPart 208: Switching functionPart 209: Colour control

Part 102

Part 101

Part 104

Part 104

Part 103

Parts 2XX

Published Add on functionality DALI-2 Published

Part 3XX

Part 216: Load referencingPart 217: Thermal gear protectionPart 218: Dimming curve selectionPart 221: Load sheddingPart 222: Thermal lamp protectionPart 224: Integrated light source

Part 219: Power measurementPart 220: Centrally supplied DC emergency operationPart 223: Light-output compensation over lifetimePart 225: Colour TcPart 226: Colour xy

Part 301: Push buttonsPart 302: Absolute input devicesPart 303: Occupancy sensorsPart 304: Light sensorsPart 332: Input control devices - feedbackPart 333: Manual configuration

Part 307: Relative input devicesPart 305: Colour sensor

General requirementsFirmware update

Particular requirementsControl / input devices

General requirementsControl devices

* DALI-2 versions published

Glamox Limited Unit 3 Capital Business ParkManor Way, Borehamwood Hertfordshire WD6 1GWTel: 0208 953 0540 Fax: 0208 953 9580Email: ukoffice@glamox.comwww.glamox.co.uk

The Glamox Group

Quality brands and solutionsThe Group owns a range of quality lighting brands including Glamox, Aqua Signal, Luxo, Norselight, LINKSrechts and Küttel. Glamox is committed to meeting customer needs and expectations by providing quality products and solutions, service and support.

Glamox is a Norwegian industrial group that develops, manufactures and distributes professional lighting solutions for the global market.

Technology and expertiseOur products and solutions are developed and tested by our engineers at our own research and testing facilities, and manufactured and certified in accordance with all relevant quality and environmental standards. They are based on the latest technology and expertise – and generations of experience.

© G

lamox

October 2018 Art.nr. M

RK00286