llGACA U".i.Allul>,,o-.b.JJ<U> l~I ~ner.,I Au1h0f1I)' of ( 1 I Av a11on

This certificate is issued to

GKN AEROSPACE SWEDEN AB

Number: AM0-163F

Date: 28 SEP 2017

whose primary address and contact information is:

SE-46181, TROLLHATTAN

SWEDEN Upon finding that its organization complies in all respects with the requirements of the General Authority of Civil Aviation Regulations relating to the establishment of an Air Agency, and is empowered to operate an approved Repair Station under GACAR Part 145 with the following ratings:

Limited Engines Limited Accessories

Limited Nondestructive Inspection, Testing, and Processing

Limited Specialized Services

subject to the conditions and limitations prescribed in the Operations Specifications.

This certificate, unless cancelled, suspended, or revoked, shall continue in effect until 02 Jul 2018

This certificate is not transferable and any changes in the basic facilities, or in the location thereof, must be immediately reported to the approriate office of the General Authority of Civil Aviation.

ABDULLAH MUBARAK SHAGAL G.M. AIRWORTHINESS AVIATION STANDARDS

GENERAL AUTHORITY OF CIVIL AVIATION KINGDOM OF SAUDI ARABIA

GACA-SSAT_AW_C_8000-4_V.0 (01 MARCH 2016)

llGAC~ l,IIUA,II ul,..J,:,IJ -...la.II ~I i.tnerol Au"""'1V o/ c .. ~ AY1ol!On

OPERATIONS SPECIFICATIONS

Al. ISSUANCE AND APPLICABILITY.

a These operations specifications are issued to GKN Aerospace Sweden AB a GACAR Part 145

repair station, certificate number, AM0-163F. The Repair Station Certificate holder shall conduct operations in accordance with GACAR Part 145 and these operations specifications at the location listed below:

The certificate holder's address:

Fixed Location: GKN Aerospace Sweden AB SE-461 81, Trollbattan Sweden

Mailing Address: GKN Aerospace Sweden AB, SE-461 81, Trollbattan Sweden

b. These operations specifications are issued as part of this Repair Station Certificate, and are in

effect as of the date signed by the President or his representative. This certificate and operations

specifications shall remain in effect until the expiration date, surrendered by the operator, or

terminated by the President, whichever comes ftrst.

*****

Date Issued 28 SEP 2017

145. A001 - 1 GKN Aerospace Sweden AB. Certificate No. : AMO- I 63F

llGAC~ vu.>A!l1.1l>,t,,h.U ._..LaJ1....i...i1 G ... r11 Authorlly ol CMI AYi11ion

OPERA TIO NS SPECIFICATIONS

I. Issued by the General A uthority of Civil Aviati01

2. T hese Operations Specifications are approved by the President.

llGACA

azmi Ch· f Airworthiness Inspection GACA-Aviation Safety Date Issued 28 SEP 2017

3. I hereby accept and receive the Operations Specifications in this paragraph.

Olof Pettersson Accountable Manager GKN Aerospace Sweden AB

Date Issued 28 SEP 2017

GKN Aerospace Sweden AB.

Date:

145. A001 - 2 Certificate No. : AM0-163F

llGAC~ uuwt ul,-..hll Llalt ......i.i..tt Genorll Autllorir, ol Chltl Avlltlon

OPERA TIO NS SPECIFICATIONS

A3. RATINGS AND LIMITATIONS.

a . The certificate holder is authorized to perform maintenance, preventative mai ntenance and

a lterations unde r the limited ratings specified in Table I be low subject to the provisions of

GACAR Part 145 and the limitations specifi ed:

Table J - Limited Ratines

Ratings Make Model Limitations

LIMITED TO MAINTENANCE UP TO AND INCLUDING

Engines Honeywell TFE731 OVERHAUL IN ACCORDANCE WITH CURRENT ENGINE MANUFACTURER'S OVERHAUL MANUALS.

LIMITED TO MAINTENANCE UP TO AND INCLUDING

Engines Pratt & Whitney PWl00 OVERHAUL IN ACCORDANCE WITH CURRENT ENGINE MANUFACTURER'S OVERHAUL MANUALS.

Date Issued 28 SEP 2017 145. A003- 1

GKN Aerospace Sweden AB Certificate No. : AM0-1 63F

llGAC~ "".>.all ul),l.hl) o laJI ~' - .. Alltllon,y o1 CMI Avi.uoo

OPERA TIO NS SPECIFICATIONS

Ratings Make Model Limitations

LIMITED TO THOSE ACCESSORIES From GKN From GKN LISTED IN GKN Aerospace Sweden AB

Accessories Aerospace Aerospace CAPABILITY LIST (REG.NO: 6705-220),

Sweden AB Sweden AB ISSUE 24 ISSUED ON MAR 08TH, 2016

Capability List Capability List AS REVISED AND ACCEPTED BY THE GACA.

Date Issued 28 SEP 2017 145. A003- 2

GKN Aerospace Sweden AB Certificate No.: AMO-163F

llGAC~ vu.>..A.11 olH,h!J "'!all ~I Gener.a Authority of Ci'vll Avtauon

OPERATIONS SPECIFICATIONS

Ratings Make Model Limitations

Nondestructive LIQUID PENETRANT INSPECTION:

Inspection, N/A N/ A I.A.W. ASTM-E-1417/MIL-STD-6866

Testing, and AND MANUFACTURER'S

INSTRUCTIONS AS REVISED. Processing

-MAGNETIC PARTICLE INSPECTION:

I.A.W. ASTM- E-1444 AND

MANUFACTURER'S INSTRUCTIONS

AS REVISED.

-EDDY CURRENT TESTING: I.A.W. MANUFACTURER'S

INSTRUCTIONS AS REVISED.

-RADIOGRAPHIC INSPECTION {RT): I.A.W. ASTM-E-1742

MANUFACTURER'S INSTRUCTIONS

AS REVISED.

ALL NON-DESTRUCTIVE INSPECTION,

TESTING, PROCESSING PERSONNEL

MUST BE QUALIFIED AND CERTIFIED

I.A.W. AIA-NAS-410 OR EN4179.

ALL NON-DESTRUCTIVE INSPECTION, TESTING, AND PROCESSING LISTED, MUST BE ACCOMPLISHED IN ACCORDANCE WITH APPROPRIATE AND CURRENT DATA WHICH HAS BEEN APPROVED OR ACCEPTED BY THE GACA/ FAA.

Date Issued 28 SEP 2017 145. A003- 3

GKN Aerospace Sweden AB Certificate No.: AM0-163F

llGAC~ \Jl'~I ulµ.bll oL.la.11 ~I General Authotlty of CMI Av\atlon

OPERATIONS SPECIFICATIONS

b. The certificate holder is authorized to perform the following specialized services in Table 2 below

in accordance with the specified specification and subject to the provisions of GA CAR Part 145

and the limitations specified:

Table 2 - Limited Ratini:s, Specialized Services

Specialized Service Specifications Limitations

NICKEL PLATING AMS 2403, AMS 2424

ANTI-GALLING TREATMENT (SPOP 146) PWA 830

SERMETELW/TREATMENT PWA 110-2

LIMITED TO SPECIAL THERMAL SPRAY PWA53 PROCESS AS LISTED IN

GKN Aerospace WELDING AMS 2681, AMS 2685 Sweden AB CAPABILITY

LIST (REG.NO: 6705-

HEAT TREATMENT SPOP 463 220), ISSUE 24 ISSUED ON MAR ogrH, 2016 AS

SHOTPEENING SPOP 501, AMS 2430 REVISED AND ACCEPTED BY THE GACA.

ELECTRO DISCHARGE PWA97

MACHINING (EDM) PWA97

RIVETING PWA 357

PAINTING PWA830

*****

Date Issued 28 SEP 2017 145. A003- 4

GKN Aerospace Sweden AB Certificate No.: AM0-163F

llGAC~ uv>AII ulµ..b!J ...... w1 ~ I Gen.rel Authontv of Chnl Aviation

OPERA TIO NS SPECIFICATIONS

I. Issued by the General Authority of Civil Aviatim 2. These Operations Specifications are approved by the President.

llGACA

-o/VSula Chi

Date Issued 28 SEP 2017

3. I hereby accept and receive the Operations Specifications in this paragraph.

Olof Pettersson Accountable Manager GKN Aerospace Sweden AB

Date Issued 28 SEP 2017

GKN Aerospace Sweden AB

Date:

145. A003- 5 Certificate No. : AM0-163F

llGAC~ uv.>.ttJI uli,..bll ""laJI ~I Genet•! Aulholity of CMI AvlalJOn

OPERATIONS SPECIFICATIONS

A6. MANAGEMENT AND DESIGNATED PERSONNEL

a. The certificate holder is authorized the personnel listed in Table I below in the GACAR Part

145 required management and designated positions:

Table t - Mana2ement and Desi2nated Personnel

GACA Position Title Name Company Equivalent Position Title

Accountable Manager 0 lo tPettersson Accountable Manager

SMS Management Rep. NIA NIA

Repair Station Manager Niklas Blom Operation Manager

Person(s) in charge of maintenance (Base I Line) Patrik Andersson Acting. Engineering Manager

Manager of Quality Per-Lennart Mollborn Quality Manager

*****

Date Issued 28 SEP 2017

GKN Aerospace Sweden AB 145.A006 -1 AM0-163F

llGAC~ \/"..JI u~ 4.,oi,,.11 .....i..,1 Gtner11 Autbo,tty of CMI Av,11lon

OPERATIONS SPECIFICATIONS

I. Issued by the General Authority of Civil Aviati01 2. These Operations Specifications are approved by the President.

llGACA

Date lssued 28 SEP 2017

3. l hereby accept and receive the Operations Specifications in this paragraph.

Olof Pettersson Accountable Manager GKN Aerospace Sweden AB

Date Issued 28 SEP 2011

GKN Aerospace Sweden AB

Date:

145.A006 -2 AM0-163F