Getting Started in CL155 - FACULTY...Getting Started in CL155 [Publication 175] 3 Fig 10 Turn Off...
Transcript of Getting Started in CL155 - FACULTY...Getting Started in CL155 [Publication 175] 3 Fig 10 Turn Off...
1
Instructional Media publication: 175 6/22/2016
© 2016 Howard Community College -This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs License.
=Tip = Caution
Crestron Touch Screen Panel
Getting Started in CL155
Introduction
Turn on the System
The Crestron Touch Screen Panel is an interactive, touch screen that allows users to control media devices: projectors, video, audio, and computer displays by manipulating the Crestron system controls on the touch screen panel. This document explains how to use the Crestron Touch Screen Panel.
1. Turn on the instructor station, the computer monitor on the right, using the power button on the side of monitor (Fig 1,1). Press Enter on the keyboard to log on.
2. Tap the Crestron touch screen panel. (Fig 2,1)
Note: The buttons on the panel are not needed.
3. Select desired Source. (Fig 3,1)
Note: Right PC is the instructor’s desktop
computer.
4. Select desired Destination. (Fig 4,1)
Note: Projector A is for traditional projector screen;
Projector B displays interactivity on the SMARTboard.
5. To hear Audio select Loudspeakers (Fig 4,2)
6. Select Go (Fig 4,3) to display media and to hear audio.
.
Note: If projector screen is not pulled down, you will need to pull down projector screen to view media. To use the SMARTboard you will need to press the Power Button on the SMARTboard. (Fig 5,1)
Introduction
Turn on the system
Adjust audio volume Using the Document Camera Turn off system and projectors
TABLE OF CONTENTS
Fig 2
Fig 1
Fig 4
Fig 5
1
2
1
Fig 3 1
3
1
1
Getting Started in CL155 [Publication 175]
2
Using the Document Camera
Fig 7
Fig 8
Adjust the Audio Volume
The audio volume should be adjusted using the audio controls on the touch screen panel. Audio volume may be raised, lowered and muted. To adjust the audio volume: 1. Press the volume down or up button on the audio
toolbar. (Fig 6,1) 2. To mute or unmute audio press the volume mute
button on the audio toolbar. (Fig 6,2)
Fig 6
4
2 1
3
1. Locate the document camera. (Fig 7) 2. Press the Power button to turn on the document camera.
(Fig 7,1) The power button light will turn green and the Doc Cam button under Source (Fig 7,2) will turn green.
Focus and Zoom: 3. Press the Plus or Minus sign buttons on the Zoom buttons
(Fig 7,3) to enlarge or decrease the magnification of the image.
4. Press the Focus button (Fig 7,4) to clarify the image. 5. Tap the Crestron touch screen panel (Fig 2,1) to display the
Select Source screen controls (Fig 6). 6. Select the Doc Cam as the desired Source. (Fig 6,3)
7. Select desired Destination (Fig 8,1), Then Press Go. (Fig 8,2)
Note: Projector A is for traditional projector screen;
Projector B displays interactivity on the SMARTboard.
NOTE: Remember to Power Off both the display system and the document camera before leaving the classroom. You will have to manually turn off the document camera by pressing the Power button on the camera itself twice, and press the Power button on the SMARTboard to turn off.
2
3
1
2
1
Getting Started in CL155 [Publication 175]
3
Fig 10
Turn Off the System and Projector
Need More Help? Contact [email protected] or call Amy Chase Martin (x4848)
Fig 9
1. To Turn off the projector tap Crestron touch screen panel. (Fig 2,1)
2. Press Power Button on the control panel. (Fig 9,1)
3. Press Yes to power off entire system (Fig 10,1) or Press Power off (Fig 10,2) under the letter of the projector you would like to turn off.
1
2
1