Get started with your TDWLB right away!€¦ · INNOVAT SSS DSTL D TT ® CirrusSense™ TDWLB iOS...
Transcript of Get started with your TDWLB right away!€¦ · INNOVAT SSS DSTL D TT ® CirrusSense™ TDWLB iOS...
INNOVATIVE SENSORSFOR INDUSTRIAL AND HOME AUTOMATION
®
CirrusSense™ TDWLBiOS ApplicationQuick Start Guide
DESCRIPTION
• Download iOS application for free.
• Tap on the CirrusSense™ app icon to launch.
Get started with your TDWLB right away!
Startup
• Tap the “Nearby” icon at the bottom
• All TDWLB sensors within range will appear in the list.
Connect
INNOVATIVE SENSORSFOR INDUSTRIAL AND HOME AUTOMATION
®
• Drag down the list to refresh if necessary.
• Choose the sensor(s) you want to connect to.
Connect
• Tap the “Connect” icon in the upper right.
• Connected sensors will appear on screen.
• Tap any sensor in the list.
• Tap “Settings” button at the bottom.
• Choose Units, enable/disable and configure alarms, and enable/disable superheat and subcooling (HVAC Mode).
• Tap “Done” at the upper right to save changes.
• NOTE: On the main screen, the battery level is always displayed in the lower left corner.
Settings & Battery
INNOVATIVE SENSORSFOR INDUSTRIAL AND HOME AUTOMATION
®
• Tap “Gear” button at the top right.
• Edit Minimum and Maximum pressure display, enable/disable Upper and Lower alarms, edit values, and select coolant if applicable.
• Tap “Save” at the upper right to save changes.
Settings
• Tap “Side by Side” button at the bottom.
• Tap “+” button next to each gauge to choose a connected TDWLB to view.
• View gauges side-by-side.
Side by Side
• Tap “Previously Connected” button at bottom.
• View entire list of previously connected sensors.
• Tap “Garbage” at the upper right to erase list.
Previously Connected
INNOVATIVE SENSORSFOR INDUSTRIAL AND HOME AUTOMATION
®
• Hold the number of the reading for 5 seconds.
• Tap “Yes” to set current reading to zero.
• Tap “No” to cancel zero/tare.
Zero/Tare Function
REV: 4.15
• Tap the “Information” icon.
• Tap the sensor name bar.
• Backspace to delete and type to rename sensor to your specifications.
Sensor Name Change
• Tap the “About” icon.
• View the Version number.
• View contact information and connect with us for help or further information.
About & Help