GET IT ALL BOXED UP - Matik, Inc. · Up to 10,000 impressions per hour enables web speeds up to 90...
5
GET IT ALL BOXED UP Web fed flatbed die cutter for conventionally or digitally printed cartons www.edale.com Manufactured in the UK FLEXIBLE | LOW WASTE | SHORT RUN | COST EFFECTIVE
Transcript of GET IT ALL BOXED UP - Matik, Inc. · Up to 10,000 impressions per hour enables web speeds up to 90...
GET IT ALL BOXED UPWeb fed flatbed die cutter for conventionally or digitally printed cartons
www.edale.com Manufactured in the UK
FLEXIBLE | LOW WASTE | SHORT RUN | COST EFFECTIVE
FLEXIBLELOW
WASTESHORT
RUNCOST
EFFECTIVE
Manufactured in the UKwww.edale.com
COMBINE CUT, CREASE, BRAILLE EMBOSSING AND WASTE REMOVAL IN A SINGLE PASS WITH THE FDC-510
Constant tension servo assisted infeed converts continuous web feed to intermittent.
Pre-register system accurately positions print to cut, minimising waste during setup.
Repeat tool changes achieved in less than five minutes and new jobs setup in under ten minutes.
Electronic cut pressure adjustment.
Job storage system stores die cutter data to be recalled at a later date.
Adjustable waste stripping section caters for a wide range of formats.
Independent control system means the FDC-510 can run either in-line or as an off-line system.
Up to 10,000 impressions per hour enables web speeds up to 90 m/min.
A rotary die chops the waste which is carried away on a conveyor.
Delivery table with adjustable height and angle ensures an accurate shingle can be achieved with all carton formats.
Diverging rollers enable up to five cartons across to be nested on the web.
Die cutting head technology is provided by KAMA, a highly respected company with over 100 years cutting experience.
Manufactured in the UKwww.edale.com
MAXIMUM WEB WIDTH 510mm
MAXIMUM CUT WIDTH 510mm
MINIMUM CARTON SIZE 150mm (L) x 100mm (W)
MAXIMUM CARTON SIZE 609.6mm (L) X 510mm (W)
MAXIMUM CARTON DELIVERY 5 across
STANDARD REPEAT RANGE 254mm - 609.6mm
MAXIMUM SUBSTRATE RANGE* 600 micron
SHORT SET UP TIME Under 15 mins
LOW COST 90% cheaper than solid rotary tooling
HIGH PRODUCTIVITY Ideal for short runs from 1000 - 100,000 units per
HIGH SPEEDS Up to 10,000 impressions per hour
MAX. FLEXIBILITY Reconfigure machine for wide range of carton
TECHNICAL SPECIFICATIONS PERFORMANCE
*Substrate range is subject to machine configuration. Actual performance will be subject to trial.
www.edale.com Manufactured in the UK
AGILITY NETWORK VISIONPERFORMANCE
Manufactured in the UK
+44 (0) 1489 569230 [email protected]
Join our Edale Limited group on LinkedIn: www.linkedin.com
Become a fan of Edale Limited on:www.facebook.com
Check us out on:www.youtube.com/EdaleLimited
Follow us on Twitter:www.twitter.com/EdaleLimited
![Matik ES Matik CS SV NOdoc.camp.it/Manuali/MATIK_MANUALE43 r1.pdf · 2019. 5. 9. · ONLY ROPE 1 Matik 8.6 9.6 10.2 ø 0123 0 14 0123 [1] Rear plate [2] Front plate [3] Attachment](https://static.fdocuments.in/doc/165x107/6043ae7b6714a44d6c557a60/matik-es-matik-cs-sv-nodoccampitmanualimatikmanuale43-r1pdf-2019-5-9.jpg)
