Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.
-
Upload
lisandro-coyne -
Category
Documents
-
view
213 -
download
1
Transcript of Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.
![Page 1: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/1.jpg)
Get Genisys Smart
Introducing the Automated Systems Tests and Smart CableSteve Zack
![Page 2: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/2.jpg)
Genisys NEW System 3.0 Enhancements
• Fast Boot technology (patent applied for)
• Quick DTC Scan
• Automated System Test (patent applied for)
• Link from popular Mode 6 items to repair info
• Link from Readiness Monitors to Drive Cycle Test Info
• Accessory / Cable List on Tool
• Glossary of Terms
• Printing of the Mode 9 VIN number on most reports
• OBD II Smart Cable Diagnostic Check
• TSB References improvement
• 1 Gigabyte Memory Card Support
• Custom Splash Screen
Currently the new Genisys software and System 3.0 will fit on a 512 MB card. BUT, this will be the final release for the 512 MB memory card.
![Page 3: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/3.jpg)
Genisys System 3.0 Vehicle Software and Memory Requirements
Each year Genisys software increases in size. This year is no exception! Users request and expect additional coverage like the “NEW for ’08” increased Hyundai and Kia coverage and repair information like Pathfinder Troubleshooting, Repair-Trac, and Fast Fixes, but it increases memory size.
November’s new Genisys software releases are: USA Domestic 2007, USA Asian 2007, and System 3.0. A 1 GB memory card is recommended, but Domestic & Asian 2007 come with System 3.0 and will install on an existing System 2.0 512 MB card.
A few release notes:
Installing USA Domestic and/or USA Asian 2007 on a System 2.0 512 Megabyte card
• Due to the 512 MB memory size limitations, there are a few program differences, such as:
• No future updates can be installed, a 1 GB memory card will be required.
• Latin America 2004 will not be installed on a 512 MB card (1 GB required).
• Slower initial installation due to file compression and decompression required.
Installing USA Domestic and/or USA Asian 2007 on a System 3.0 1 Gigabyte card
• All applications will install and FAST…………
• You are ready for future new software releases.
![Page 4: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/4.jpg)
The technician currently selects the appropriate System Smart Insert he needs for the job.
The new OBD II Smart Cable is essentially “plug and play”.
Definition:System Smart Inserts (SSI’s) are used to “mux” or route connector data lines as necessary to facilitate OEM enhanced communication and can sometimes contain electronics. SSI’s provided access to this OEM enhanced information in place of additional cables.
What was once the best low cost solution is now re-invented with the Genisys OBD II Smart Cable.
Over 50 System Smart Inserts replaced with one Smart Cable
Genisys OBD II Smart Cable
![Page 5: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/5.jpg)
Genisys OBD II Smart CableFeatures/Changes
• Previous OBD II SSI Cable goes away
• Over 50 SSI’s go away!
• No new SSI’s in the various Genisys Kits - many were planned!
• Sophisticated electronic circuitry in the new OBD II Smart Cable replaces current and future line switching System Smart Inserts (SSI’s).
Bottom Line Benefits
• Improved technician satisfaction
• Improved test capability
• Faster Diagnosis, more convenient
• Higher technician productivity
Genisys OBD II Smart Cable - continued
![Page 6: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/6.jpg)
Automated System Test™& Quick DTC Scan
• With one button press, Automated System Test and Quick DTC Scan performs a system “health check” of all available vehicle controllers.
• Any trouble codes found are reported along with other vital scan data.
• Repair-Trac pattern failures and available repair information are linked to trouble codes of the top known component failures.
Re-inventing Genisys
![Page 7: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/7.jpg)
Genisys NEW System 3.0 Quick DTC Scan
Quick DTC Scan• DTC Scan taken from the Automated System Test DTC function.
• Scans all supported systems automatically for DTC’s.
• Quick DTC summary screen the same as in Automated System Test results.
• DTC’s listed by controller
• Press Enter on selected DTC’s to view repair information.
• Print Detail of all DTC’s
![Page 8: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/8.jpg)
Automated System Test™, One button press and it will perform the test and report the data in a fraction of the time it used to take using manual, step by step procedures.
Automated System Test™ begins to automatically poll all available controllers for DTC’s and other vital scan data.
Genisys Automated System Test
Genisys Automated System Test™ ties together the diagnostic power of Pathfinder™, Repair-Trac InfoTech™, and Fast Fixes™ troubleshooters for you, saving time and increasing profitability.
![Page 9: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/9.jpg)
Genisys Scan Component Test
Top 10 Failed Components ListCam SensorCrank SensorKnock Sensor(s)O2 Sensor(s)Heated O2 Sensor(s)EGR SolenoidEVAP/Tank Pressure SensorEVAP Vent/Purge Valve(s)/Solenoid(s)Injector(s)MAF SensorMAP SensorTrans Shift Solenoid(s)ABS Wheel Speed Sensor(s)
4Start the engine (KOER), and allow to warm to normal operating temperature. Once the engine is at normal operating temperature, go on to the next step.
5Using the scan tool, access and review the active DTCs. If the active DTCs indicate a concern with the heater portion of the oxygen sensor, go to step 9, otherwise go to the next
6
Fuel calculations can be affected by unmetered air leaks. Carefully inspect the following areas for potential air leaks. A-Hoses connecting to the mass air flow (MAF) sensor. B-Hoses connecting to the throttle body. C-Intake manifold gasket leaks. D-Leaks in the positive crankcase ventilation (PCV) system. E-Disconnected vacuum lines. F-Improperly seated engine oil dipstick, tube or oil fill cap. G-Exhaust leaks at flanges and gaskets. If a concern is found, repair that concern and retest the system. Otherwise, go on to the next step.
7
Note: Upstream oxygen sensors should switch from rich to lean every few seconds. The voltage should toggle above and below 0.450 DC volts and never be a negative value. Using the scan tool, access the live data readings related to the heated oxygen sensors (HO2S) bank 1 sensor 1and bank 2 sensor 1. Is the DC voltage toggling between 0.4 and 0.6 volts? If the voltage is within the specified range, go on to the next step, otherwise go to step 10.
8
Note: Downstream oxygen sensors will stay close to a constant positive value near 0.450 DC volts when the catalyst monitor is OFF. When the catalyst monitor is ON, the downstream oxygen sensors will switch rich to lean above and below 0.450 DC volts and never be a negative value. Using the scan tool, access the live data readings related to the bank 1 sensor 2 and bank 2 sensor 2. Is the DC voltage remaining constant near 0.450 DC volts or toggling between 0.4 and 0.6 volts? If the voltage is within the specified range, it appears the HO2S system is operating correctly at this time. If the voltages are not within the specified
Example O2 Sensor Scan Test Procedure
Pathfinder’s Scan Component Test will be available via the new Automated System Test & manually in Pathfinder Troubleshooting.
Pathfinder’s Scan Component Test will be available via the new Automated System Test & manually in Pathfinder Troubleshooting.
![Page 10: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/10.jpg)
Genisys USA 2007 Domestic Software
New Expanded Systems Coverage and Special Tests
• New - Tire Pressure Monitoring System coverage up to 2007 models.
• New - approximately 500 vehicles, 1000 systems and over 350 bidirectional tests are added for earlier year vehicles as well as 2007 models.
• New - expanded EVAP system coverage including the Chrysler Leak Detection Pump (LDP) Monitor Test.
• New - expanded GM Body System coverage for 2007 and older vehicles.
• New - increased coverage and functionality on vehicles back to 1992 that technicians see in their shops everyday!
• Updated - Fast Fixes now updated from a database of more that 60,000 confirmed fixes.
![Page 11: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/11.jpg)
Genisys USA 2007 Asian Software
USA 2007 Asian Software—Now with Expanded Hyundai / Kia
• New - TPMS bidirectional tests have been added for Toyota, Honda, Mitsubishi and more. Including the ability to enter the TPMS sensor I.D and sensor initiation.
• New - EVAP bidirectional tests have been added for Toyota, Honda, Nissan, Mazda, Hyundai and Kia.
• New - approximately 500 vehicles, 4000 systems and over 500 bidirectional tests are added for 2007 and earlier vehicles.
• New - Asian Pathfinder Troubleshooter to include Data / Sensor Information for Toyota, Lexus, Scion, Nissan, Infinity, Honda, Acura, Mazda, Mitsubishi, & more.
• New - enhanced Hyundai coverage 1989 – 2007 and Kia 1994 – 2007.
• New - Honda licensed OEM data coverage includes engine, transmission, ABS, air bag, tire pressure monitor, and more body and chassis systems.
• Expanded - enhanced Toyota to 2007 including OBD I, 1995 and older coverage.
![Page 12: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/12.jpg)
Automated Systems Tests
![Page 13: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/13.jpg)
Scroll to Scan Diagnostics
To perform Scan Tool functions scroll to Scan Diagnostics and press Enter
Enter
![Page 14: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/14.jpg)
Scroll to USA 2007 Domestic
Scroll to the vehicle type your are working with and press Enter
Enter
![Page 15: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/15.jpg)
Scroll to GM
Enter
Scroll to the brand of vehicle your all working on and press Enter
![Page 16: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/16.jpg)
Scroll to 2000 - 2007
Enter
Scroll to the Year Range of the vehicle and press Enter
![Page 17: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/17.jpg)
Scroll to 2003
Enter
Scroll to the year of the vehicle and press Enter
![Page 18: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/18.jpg)
Scroll to Chevrolet
Enter
Scroll to the make of the vehicle your are working on and press Enter
![Page 19: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/19.jpg)
Scroll to Car
Enter
Select Car or Truck and press Enter
![Page 20: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/20.jpg)
Scroll to Impala
Enter
Scroll to the Carline and press Enter
![Page 21: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/21.jpg)
Scroll to Engine/PCM
Enter
Scroll to the computer you are to diagnose and press Enter
![Page 22: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/22.jpg)
Scroll to 3.4
Enter
Scroll to the vehicles engine and press Enter
![Page 23: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/23.jpg)
Select the Smart Cable as shown from the tool box, install it on the Scan Tool and to the Vehicle
![Page 24: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/24.jpg)
Press the Demo soft key
Enter
For training purposes, press the Demo soft key and then press Enter
![Page 25: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/25.jpg)
Scroll to Automated Systems Test
Enter
Select the Automated Systems Test to perform comprehensive diagnostic of the vehicle systems
![Page 26: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/26.jpg)
![Page 27: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/27.jpg)
![Page 28: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/28.jpg)
![Page 29: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/29.jpg)
![Page 30: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/30.jpg)
![Page 31: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/31.jpg)
Scroll to Trouble Codes and press Enter
Scroll to Trouble Codes
Enter
![Page 32: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/32.jpg)
Scroll to fault code P0101B
Enter
Scroll down to go from item to item, or scroll to the right to change pages, and select an area of concern that requires diagnostics, and press Enter for diagnostic information
![Page 33: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/33.jpg)
Scroll to Circuit Description
Enter
Scroll to Circuit Description to determine how the circuit at fault functions
![Page 34: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/34.jpg)
Exit
Exit
![Page 35: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/35.jpg)
Scroll to Possible Causes
Enter
Scroll to Possible Causes to determine what may cause the fault
![Page 36: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/36.jpg)
Exit
Exit
![Page 37: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/37.jpg)
Scroll to Code Setting
Enter
Scroll to Code Setting and press Enter
![Page 38: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/38.jpg)
Enter
Enter
![Page 39: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/39.jpg)
Exit
Exit
![Page 40: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/40.jpg)
Exit
Exit
![Page 41: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/41.jpg)
Scroll to Data Stream Items
Enter
Scroll to Data Stream Items and press Enter to review related freeze frame Datastream
![Page 42: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/42.jpg)
Scroll to MAF Sensor
Scroll to the PID you wish to customize
![Page 43: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/43.jpg)
Press the More soft key
Enter
To enlarge the PID press the More soft key and scroll to Zoom and press Enter
Scroll to Zoom
![Page 44: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/44.jpg)
![Page 45: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/45.jpg)
Press the Graph soft key
To graph a PID to plot data pres the Graph soft key
![Page 46: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/46.jpg)
To decrease the size of PID press the More soft key, scroll to Zoom, and press Enter
Press the More soft key
Scroll to Zoom
Enter
![Page 47: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/47.jpg)
![Page 48: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/48.jpg)
Press Analog soft key
To view the sweep of a sensor press the Analog soft key
![Page 49: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/49.jpg)
Press the 123 Digital soft key
To return a PID to digital press the 123 Digital soft key
![Page 50: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/50.jpg)
Press the Graph soft key
To return the PID to graph press the Graph soft key
![Page 51: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/51.jpg)
Press To Top soft key
To place the PID at the top of the Datastream list press the To Top soft key
![Page 52: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/52.jpg)
For PID specifications press the More soft key, scroll to Pathfinder, and press Enter
Enter
Press the More soft key
Scroll to Pathfinder
![Page 53: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/53.jpg)
Scroll to Data/Sensor Information
Enter
Scroll to Troubleshooting information you are looking and press Enter
![Page 54: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/54.jpg)
Scroll to MAF Sensor
Enter
Scroll to the PID you are looking for information on
![Page 55: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/55.jpg)
Scroll to Function Test/Data
Enter
Scroll to the Option you need information on
![Page 56: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/56.jpg)
Exit
The specifications are listed as Typical Value
![Page 57: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/57.jpg)
Exit
Exit
![Page 58: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/58.jpg)
Exit
Exit
![Page 59: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/59.jpg)
Exit
Exit
![Page 60: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/60.jpg)
Exit
Exit
![Page 61: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/61.jpg)
Scroll to Scan Component Tests
Enter
Scroll to Scan Component Tests and press Enter to review diagnostic test procedures
![Page 62: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/62.jpg)
Press Datastream soft key
Press the Datastream soft key to review related Datastream
![Page 63: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/63.jpg)
Exit
Exit
![Page 64: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/64.jpg)
Exit
Exit
![Page 65: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/65.jpg)
Scroll to Component Data
Enter
Scroll to Component Data and press Enter
![Page 66: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/66.jpg)
Enter
Enter
![Page 67: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/67.jpg)
Scroll to Digital HF
Enter
Scroll to the type of component and press Enter
![Page 68: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/68.jpg)
Exit
Exit
![Page 69: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/69.jpg)
Exit
Exit
![Page 70: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/70.jpg)
Exit
Exit
![Page 71: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/71.jpg)
Scroll to Repair-trac
Enter
Scroll to Repair-trac for Identifix known fixes
![Page 72: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/72.jpg)
Scroll to Check Engine Light
Enter
Scroll to Category for repair strategy
![Page 73: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/73.jpg)
Exit
Exit
![Page 74: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/74.jpg)
Exit
Exit
![Page 75: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/75.jpg)
Scroll to Break Out Box
Enter
Scroll to Break Out Box to obtain wire color
![Page 76: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/76.jpg)
Press the Ok soft key
Press the Ok soft key
![Page 77: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/77.jpg)
Enter
Press Enter to review the wire color
![Page 78: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/78.jpg)
Exit
Exit
![Page 79: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/79.jpg)
Exit
Exit
![Page 80: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/80.jpg)
Exit
Exit
![Page 81: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/81.jpg)
Press the New soft key
Press the New soft key
![Page 82: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/82.jpg)
Exit
Exit
![Page 83: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/83.jpg)
Exit
Exit
![Page 84: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/84.jpg)
![Page 85: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/85.jpg)
Productivity Video
![Page 86: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/86.jpg)
![Page 87: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/87.jpg)
InfoTech
![Page 88: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/88.jpg)
Enter
Scroll to Repair Information
Scroll to Repair Information and press Enter.
![Page 89: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/89.jpg)
Enter
Scroll to InfoTech
Scroll to InfoTech and press Enter.
![Page 90: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/90.jpg)
Press the No soft key
Press the No soft key, as calibration is unnecessary when only using InfoTech without the scope.
![Page 91: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/91.jpg)
Enter
Scroll to Vehicle Entry
Scroll to Vehicle Entry and press Enter.
![Page 92: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/92.jpg)
Scroll to GM and press Enter.
Enter
Scroll to GM
![Page 93: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/93.jpg)
Enter
Scroll to 2003
Scroll to 2003 and press Enter.
![Page 94: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/94.jpg)
Enter
Scroll to Chevrolet
Scroll to Chevrolet and press Enter.
![Page 95: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/95.jpg)
Enter
Scroll to Car
Scroll to Car and press Enter.
![Page 96: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/96.jpg)
Enter
Scroll to Impala
Scroll to Impala and press Enter.
![Page 97: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/97.jpg)
Enter
Scroll to Base
Scroll to Base and press Enter.
![Page 98: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/98.jpg)
Enter
Scroll to 3.4L, VIN E
Scroll to 3.4L, VIN E and press Enter.
![Page 99: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/99.jpg)
Enter
Scroll to Engine
Scroll to Engine and press Enter.
![Page 100: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/100.jpg)
Enter
Scroll to Component Tests
Scroll to Component Tests and press Enter.
![Page 101: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/101.jpg)
Enter
Scroll to Heated Oxygen Sensor
Scroll to Heated Oxygen Sensor and press Enter.
![Page 102: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/102.jpg)
Scroll to HO2S No. 1 and press Enter.
Enter
Scroll to No. 1
![Page 103: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/103.jpg)
Press the Repair Info soft key
The display describes how to hook up the scope for testing. To find other hook up information, press the Repair Info soft key.
![Page 104: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/104.jpg)
Scroll to Ckt Diagram, and press Enter.
Scroll to Ckt Diagram
Enter
![Page 105: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/105.jpg)
Press the Back soft key
Press the Back soft key to complete the scope lead hook up.
![Page 106: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/106.jpg)
Exit
Exit
![Page 107: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/107.jpg)
Exit
Exit
![Page 108: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/108.jpg)
Exit
Exit
![Page 109: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/109.jpg)
Exit
Exit
![Page 110: Get Genisys Smart Introducing the Automated Systems Tests and Smart Cable Steve Zack.](https://reader038.fdocuments.in/reader038/viewer/2022110303/55175c255503460e6e8b4850/html5/thumbnails/110.jpg)