GES Heat Treat Brochure 1 Description: An excellent material for insulations in high-temperature...
Transcript of GES Heat Treat Brochure 1 Description: An excellent material for insulations in high-temperature...
2
GES Graphite
Graphite Electrode Sales has more than 50 years experience and is the leading distributor of graphite and carbon products in the Americas. In addition, we offer many value added services including: warehousing, anti-ox coatings, re-packaging, and technical service. At GES, we guarantee and stand behind the quality of our products. We look forward to doing business with you in the future.
“Quality, Service, and Consistency.”
3
High Temperature Materials
Properties Bulk Density
Carbon Content
Flexural Strength Tensile Strength Thermal
Conductivity Grade g/cm3 % MPa MPa W/m-K
Rigid Board
GPB <0.18 99.9 2.0 - 0.25
GRB <0.17 99.9 0.2 - 0.15
Felt
CPB 0.10 99.5 - 0.15 0.16
CRB 0.09 99.0 - 0.10 0.25
GPB 0.16 99.9 - 0.25 0.40
GRB 0.08 99.9 - 0.13 0.40
CFC Sheet 1.45-1.60 99.9 112 83 -
Material 1.60-1.70 99.9 110 70 -
* The above data should be regarded as general information, not guaranteed specification limits.
GES Warehouse Facility in Emlenton, PA
Overview
4
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
Standard Sizes: 1000 x 1500 x 40 (50) mm Max Dimension: 1600 x 1200 x 300 mm
Graphite Rigid Board Specifications Pan Based Grade
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Metric UOM
Density ASTM C-838 g/cm3 <0.18
Carbon Content ASTM C-830 % >99.90
Ash Content ASTM C-651 ppm <200.00
Flexural Strength ASTM C-695 MPa 2.00 Thermal
Conductivity ASTM C-565 W/m-K 0.25
Volatile ASTM C-611 % 0.00
Processing Temp. ASTM C-611 °C 2200
5
Graphite Rigid Board Specifications Rayon Based Grade
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
Standard Sizes: 1000 x 1500 x 40 (50) mm Max Dimension: 1600 x 1200 x 300 mm
Properties Test Standard
Metric UOM
Density ASTM C-838 g/cm3 <0.17
Carbon Content ASTM C-830 % >99.90
Ash Content ASTM C-651 ppm <100.00
Flexural Strength ASTM C-695 MPa 0.2 Thermal
Conductivity ASTM C-565 W/m-K 0.15
Volatile ASTM C-611 % 0.00
Processing Temp. ASTM C-611 °C 3000
* The above data should be regarded as general information, not guaranteed specification limits.
6
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
Carbon felt Specifications Pan Based Grade
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Measurement Metric Conditions UOM
Density ASTM C-838 20°C g/cm3 0.10
Thickness ASTM C-559 - mm 3-12
Width ASTM C-830 - mm 1000/1200
Length ASTM C-651 - m 12/18
Carbon Content ASTM C-695 - % 99.5 Thermal
Conductivity ASTM C-695 1000°C W/m-K 0.16
Tensile Strength ASTM C-695 20°C MPa 0.15
Electrical Res. ASTM C-695 20°C Ohm.cm 0.25
Processing Temp.
ASTM C-565 Vacuum °C 2200
ASTM C-565 Gas Protection °C 3000
7
Carbon felt Specifications Rayon Based Grade
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
Properties Test Standard
Measurement Metric Conditions UOM
Density ASTM C-838 20°C g/cm3 0.09
Thickness ASTM C-559 - mm 3-12
Width ASTM C-830 - mm 1000/1200
Length ASTM C-651 - m 12/18
Carbon Content ASTM C-695 - % 99.0 Thermal
Conductivity ASTM C-695 1000°C W/m-K 0.25
Tensile Strength ASTM C-695 20°C MPa 0.10
Electrical Res. ASTM C-695 20°C Ohm.cm 0.16
Processing Temp.
ASTM C-565 Vacuum °C 2200
ASTM C-565 Gas Protection °C 3000
* The above data should be regarded as general information, not guaranteed specification limits.
8
Graphite felt Specifications Pan Based Grade
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Measurement Metric Conditions UOM
Density ASTM C-838 20°C g/cm3 0.16
Thickness ASTM C-559 - mm 3-12
Width ASTM C-830 - mm 1000/1200
Length ASTM C-651 - m 12/18
Carbon Content ASTM C-695 - % 99.9 Thermal
Conductivity ASTM C-695 1000°C W/m-K 0.40
Tensile Strength ASTM C-695 20°C MPa 0.25
Electrical Res. ASTM C-695 20°C Ohm.cm 0.14
Processing Temp.
ASTM C-565 Vacuum °C 2200
ASTM C-565 Gas Protection °C 3000
9
Graphite felt Specifications Rayon Based Grade
Description: An excellent material for insulations in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor Crystal Pulling/Deposition • Crystallization and Optic Fiber Production
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Measurement Metric Conditions UOM
Density ASTM C-838 20°C g/cm3 0.08
Thickness ASTM C-559 - mm 3-12
Width ASTM C-830 - mm 1000/1200
Length ASTM C-651 - m 12/18
Carbon Content ASTM C-695 - % 99.9 Thermal
Conductivity ASTM C-695 1000°C W/m-K 0.40
Tensile Strength ASTM C-695 20°C MPa 0.13
Electrical Res. ASTM C-695 20°C Ohm.cm 0.12
Processing Temp.
ASTM C-565 Vacuum °C 2200
ASTM C-565 Gas Protection °C 3000
10
Description: An excellent material for support, reinforcement, and fixturing in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor • Crystallization and Optic Fiber Production
CFC Sheet specifications
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Metric UOM Warp Dir. Fill Dir.
Density ASTM C-838 g/cm3 1.45-1.60 1.45-1.60
Carbon Content ASTM C-559 % 99.9 Min. 99.9 Min.
Ash Content ASTM C-830 ppm 200 max. 200 max.
Flexural Strength ASTM C-830 MPa 112 110 Compressive
Strength ASTM C-830 MPa 66 57
Tensile Strength ASTM C-830 MPa 83 69
Treatment Temp. ASTM C-651 °C 2200
Thermal Durability ASTM C-695 °C 3600
11
Description: An excellent material for support, reinforcement, and fixturing in high-temperature vacuum and inert atmosphere furnaces which are widely applied in heat treating, sintering, crystallization/optic fiber production, and semiconductors. Typical applications:
• Vacuum Furnace Insulation • Ceramic Sintering • Semiconductor • Crystallization and Optic Fiber Production
CFC Material specifications
* The above data should be regarded as general information, not guaranteed specification limits.
Properties Test Standard
Metric UOM
Density ASTM C-838 g/cm3 1.60-1.70
Carbon Content ASTM C-559 % 99.9 Min.
Ash Content ASTM C-830 ppm 100 max. Compressive
Strength ASTM C-830 MPa 130
Flexural Strength ASTM C-830 MPa 110
Tensile Strength ASTM C-830 MPa 70
Treatment Temp. ASTM C-651 °C 2200
Thermal Durability ASTM C-695 °C 3600