Germany COMMERCIAL VEHICLE PARTS · n Heat treatment and HRC hardness sampling for each Tie Rods...
Transcript of Germany COMMERCIAL VEHICLE PARTS · n Heat treatment and HRC hardness sampling for each Tie Rods...
Our rubber metal components reliably reduce vibrations and offer resistance to extreme loads, thereby increasing the service life of parts prone to vibration, as well as improving user comfort.
BUSHINGS Usually installed as wear-resistant and maintenance-free connectors, bushings have a fundamental role in sound insulation, stability, comfort, and safety of the vehicle.
AXLE STRUT MOUNTINGS Axle strut mountings are rubber-metal knuckles used on Torq rods and A-arms to dampen vibration.
ENGINE MOUNTSP2 engine mounts are individually designed for each application, in order to absorb the varying loads and extreme accelerations of different engines and ensuring maximum comfort.
COOLER MOUNTS P2 cooler mounts are designed to cushion the vibrations of the radiator assembly, ensuring its integrity and increasing its service life, as well as reducing noise and improving comfort.
P2 friction products are produced to OE standards, and use state-of-the-art bonding technologies and advanced production methods. You can be assured of maximum quality, reliability and safety, due to our proven braking performance.
In addition to being environmentally friendly, our Asbestos-free friction material is a paramount factor in the superior braking performance of our brake pads and truck linings.
BRAKE PADS We continuously research and develop new friction formulations in order to keep up with the latest advances in the industry.
Top five reasons to choose P2 brake pads:
nExcellent bonding strength
nFormulated to reduce noise
nBrake fade resistance
nGood wear resistance
nProper bed-in via scorching
TRUCK LININGS P2 truck linings have one of the most efficient cost per distance performance in the market and are very well received by discerning fleet owners and managers. Our truck linings come with rivets for ease of installation onto pre-drilled holes.
P2 truck linings exhibit excellent performance in the following:
nLong-lasting braking performance
nLow wear rate
nLow brake fade under extended use
nLess noise
nLess dust
RUBBER METALFRICTION
COMMERCIAL VEHICLEPARTS
www.p2-lkw.de
P2 LKW TeileAlfred-Kühne-Strasse 3D-85416 Langenbach
Germany
www.p2-lkw.de
AIR DRYERS nApplied in pneumatic installations to remove excessive moisture from air sucked in.
nFiltration medium uses a combination of filtration fabric, which stops solid pollutants the sizes of about 0,5 µm efficiently, and special polymer fibres, which chemically bonds with air moisture and stops it from passing through.
nProlongs the life of pneumatic installation elements up to four times, practically eliminating corrosion in the system.
HYDRAULIC FILTERS nHydraulic filters are used in hydraulic applications in commercial vehicles to maintain the quality of oil and durability of system elements (pumps, valves, seals, actuators) exposed to high pressure, abrasion and erosion caused by cavitation.
nAccording to the hydraulic system requirements, filtration media can be made out of metal net (low filtration efficiency, possibility of regeneration) or special filtering materials reinforced with metal nets (high filtration efficiency and resistance to pressure pulsation.
COOLANT FILTERS nFilter medium is made out of special filtration materials for the efficient trapping of solid contaminants.
nStops dust, corrosion products and sludge, formed in the degradation process of products typically added to the coolant system to protect against corrosion and erosion.
nCoolant filters contain corrosion inhibitors, which are gradually released into the coolant, replenishing components being degraded.
nMaintains a high level of liquid thermal conductivity, as well as anticorrosion and anticavitation properties.
AIR FILTERS n99% contaminant filtering efficiency
nVery high contaminant absorption potential
nSize of the filtering medium reaches up to 10m²
OIL FILTERS nEngine protection
nPrevention against by-pass of unfiltered engine oil
nHigh particle separation rate
nHigh-quality seals to prevent leakages.
nOptimal operation, even under high temperature
FUEL FILTERS nOE specifications
nHigh fuel capacity
nSpin-on filter to take high pressure variants
nResist against wear and corrosion
nState-of-the-art material for optimal trapping of pollutants
CABIN FILTERS nOE specifications
nMade with high-grade charcoal with perfect pore size, wet solidity and impregnation
nProcessed with oxygen to become activated carbon
nEliminates odours
nProtected against bacterial and fungal growth
nEco-friendly and recyclable after usage
We design, develop and distribute a wide range of steering and
suspension parts for most commercial vehicle applications. P2
believe in constant innovation, for the most effective, efficient and
safest steering and suspension products.
We complete manufacturing to top quality and with a short lead
time, by utilising computer-aided design, top-notch engineering and
manufacturing methods, and many years of production experience.
From the design stage to final production, we use modern design
and production programs that keep efficiency and creativity at the
highest level. We have been awarded with certificates for TS 16949
and ISO 9001.
P2 shock absorbers are produced to match OE quality standards,
offering superior performance, ride, comfort and safety.
SHOCK ABSORBER RANGE
nAxle Shocks
nCabin Dampers
nSeat Dampers
P2 air spring suspension products come with a 3 year warranty for a mileage of up to 250,000 km. P2 offers a range of high quality air spring suspension parts, including Air Bellows, Air Springs and Cabin Air Springs.
The following factors are a testament to the quality of our air springs:
nHigh strength parameters on fatigue.
nExcellent resistance to high and low temperatures.
nHigh resistance to external factors (ozone, salt, light).
nFailure-free during use.
nFlexibility and tightness of the product.
nP2’s standard is 7,000,000 cycles at a frequency of 3 Hz without any changes on the product surface.
AXLE SHOCKS Our axle shocks come with a 3 year warranty for a mileage of up to 250,000 km.
P2 axle shocks come in multiple dimensions, and feature unique elements including a blow-off valve and hydraulic stop, which gives them the edge over competing products.
The features below ensure durability, safety and oustanding resistance, even in extreme conditions:
nExtremely durable single-bonded bushing, facillitating ease of installment.
nHigh temperature resistant sealing system: maximizes durability.
nHydraulic lock-out piston: no over-extension of the air bellows. This eliminates external drop limiter.
nHigh temperature resistantant hydraulic fluid: this semi- synthetic fluid provides for more consistant damping over a wide temperature range.
nAnti-wear coated piston ring: very high wear resistance of the unit. More consistant damping thanks to its sealing capabilities.
nDouble action valve system in bump and rebound: guarantees smooth and safe vehicle handling. Forces on chassis components are kept to the minimum.
We use high-quality filter materials to ensure continually efficient flow, and to guarantee the highest deposition rates as well as long life-spans for the components. P2 offers a wide range of filters for commercial vehicles including:
Various aspects of our production process ensures the superior quality of P2’s OE-standard nuts and bolts:
nWe use the best quality steel.
nEntire production process is subjected to stringent quality control.
nHeat treatment and HRC hardness sampling for each batch ensures product stability, reliability and longevity.
nCold forging technology.
nMore than 108 hours neutral salt-fog test for Chrome and Zinc plating.
nEvery season, new molding development according to the target of market requirement.
P2’s electropneumatic products check, control and move technical processes, which makes these parts indispensable components in complex mechatronic systems for commercial vehicles.
nActuators perform a mechanical switching process with the help of external control information.
nSolenoids control the flow of gases and liquids in hydraulic or pneumatic systems.
nSensors are technical components that measure the status of a system factor and pass it on as relevant information to the control or regulation system.
nIntegrated Valve Modules combine solenoids valves and pressure sensors together in compact form in a single casing.
FILTERS SHOCK ABSORBERS STEERING AND SUSPENSION AIR SPRINGS
NUTS AND BOLTS
ELECTROPNEUMATIC
P2 water pumps are produced to the highest quality standards, and are stringently tested throughout their production for fitment, running, noise levels and leakage.
Our water pumps have been been certified ISO 9001 by SGS.
WATER PUMPS
Tie Rod Ends Drag Links
Tie RodsA-Arms
Torque Rods Stabiliser Links
STEERING AND SUSPENSION RANGE