Geotextiles Nonwovens Capabilities as specified by … · Geotextiles Nonwovens Capabilities The...
4
TM Geotextiles Nonwovens Capabilities The Foundation to Build On ™ Excellent products to do the job. The service to do it right. ™ Filtration – Thrace nonwoven geotextiles work in equilibrium with the soil, allowing adequate liquid flow with limited soil loss, while avoiding pore clogging. Erosion Control – Thrace nonwoven geotextiles can be used independently or in conjunction with Thrace woven geotextiles to create geobags which provide erosion control of slopes, shoreline protection and riverbank flood control. Reinforcement/Stabilization – Although soil maintains a consistent compressive, the strong tensile mechanical properties of Thrace geotextiles counterbalance soils’ poor tensile properties, improving the total system’s strength interaction. The high strength and low elongation of the fabrics are ideal for reinforcing embankments of roads, slopes and retaining walls. Protection – Thrace nonwoven geotextiles offer perfect damage protection. Contact with sharp soil surfaces such as stones or subgrade unevenness harms geomembranes and other coated materials. Thrace nonwovens protect these materials using thickness and mass that are directly proportional to the amount of protection they offer. Separation – Inserting Thrace flexible and porous geotextiles between dissimilar earth materials increases the integrity and function of both materials. The earth materials can then be improved or left intact. Drainage – The balance between the soil and Thrace geotextile systems allows for adequate liquid flow, while maintaining limited soil loss. The hydraulic properties of the fabric are suitable to establish structural stability by controlling excess amounts of water during and after construction. Civil Nonwovens We offer a full range of products from 3.2 ounces to 16 ounces / square yard for use in many civil applications, as specified by AASHTO. • Paving Fabrics • Separation • Stabilization • Permanent Erosion Control • Subsurface Drainage Features & Benefits • Even Consistent Protection • Wide Width, Reducing Installation and Maximizing Freight • Fewer Seams and Reduced Installation Cost Features & Benefits Paving Fabrics We offer a wide range of Paving Fabrics, from our AASHTO M288 approved AOM to our recently developed 133 CBI Pavement Interlayer. • Delay the Formation of Reflective Cracking • Absorb and Dissipate Stress • Provide a Moisture Barrier • Extend the Life of Distressed Pavements • Offer Economical, Long-lasting Rehabilitation Features & Benefits Environmental Nonwovens Geotextiles from 4 ounces to 16 ounces / square yard are available in fabric widths up to 17 feet wide. Reduced seams and increased loading provide unique advantages and savings on these quality intensive projects.
-
Upload
nguyenhuong -
Category
Documents
-
view
222 -
download
0
Transcript of Geotextiles Nonwovens Capabilities as specified by … · Geotextiles Nonwovens Capabilities The...
TM
Geotextiles Nonwovens Capabilities
The Foundation to Build On™ Excellent products to do the job. The service to do it right.™
TM 2550 West Fifth North St. • Summerville, SC 29483800.445.4675 • 843.873.5800 • Fax: 843.875.8276 www.thracelinq.com • [email protected]
Filtration – Thrace nonwoven geotextiles work in equilibrium with the soil, allowing adequate liquid flow with limited soil loss, while avoiding pore clogging.
Erosion Control – Thrace nonwoven geotextiles can be used independently or in conjunction with Thrace woven geotextiles to create geobags which provide erosion control of slopes, shoreline protection and riverbank flood control.
Reinforcement/Stabilization – Although soil maintains a consistent compressive, the strong tensile mechanical properties of Thrace geotextiles counterbalance soils’ poor tensile properties, improving the total system’s strength interaction. The high strength and low elongation of the fabrics are ideal for reinforcing embankments of roads, slopes and retaining walls.
Protection – Thrace nonwoven geotextiles offer perfect damage protection. Contact with sharp soil surfaces such as stones or subgrade unevenness harms geomembranes and other coated materials. Thrace nonwovens protect these materials using thickness and mass that are directly proportional to the amount of protection they offer.
Separation – Inserting Thrace flexible and porous geotextiles between dissimilar earth materials increases the integrity and function of both materials. The earth materials can then be improved or left intact.
Drainage – The balance between the soil and Thrace geotextile systems allows for adequate liquid flow, while maintaining limited soil loss. The hydraulic properties of the fabric are suitable to establish structural stability by controlling excess amounts of water during and after construction.
QualityEach Thrace manufacturing facility supplies advanced measurement and accuracy through detailed, hands-on process controls, expert tenured personnel and state-of-the-art warehousing. Thrace nonwovens stand at the forefront of quality.
Ready to Ship InventoryThrace nonwovens are manufactured on both sides of the Atlantic. Our vertically integrated production not only guarantees quality consistency, but also provides satisfactory lead times that meet our customers’ needs.
Civil NonwovensWe offer a full range of products from 3.2 ounces to 16 ounces / square yard for use in many civil applications, as specified by AASHTO.
• PavingFabrics• Separation• Stabilization• PermanentErosionControl• SubsurfaceDrainage
Features & Benefits
• EvenConsistentProtection• WideWidth,ReducingInstallation andMaximizingFreight• FewerSeamsandReducedInstallationCost
Features & Benefits
Paving FabricsWe offer a wide range of Paving Fabrics, from our AASHTO M288 approved AOM to our recently developed 133 CBI Pavement Interlayer.
• DelaytheFormationofReflectiveCracking• AbsorbandDissipateStress• ProvideaMoistureBarrier• ExtendtheLifeofDistressedPavements• OfferEconomical,Long-lastingRehabilitation
Features & Benefits
Environmental NonwovensGeotextiles from 4 ounces to 16 ounces / square yard are available in fabric widths up to 17 feet wide. Reduced seams and increased loading provide unique advantages and savings on these quality intensive projects.
Please do not hesitate to call us if you have a question, need a sample or require a quote on a needle-punched nonwoven product.
Needle-punched Nonwoven
Civil Nonwoven
Needle-punched Nonwoven Specialty Products
1 - Contact your Thrace-LINQ distributor or representative for technical assistance and for products meeting AASHTO M288 specifications. Additional information can also be found at www.thracelinq.com. Methods and values may change without notice.2 - Minimum Average Roll Value. All values are MARV unless otherwise noted. 3 - AOS values are reported as Maximum Average Roll Value. 4 - Other products and roll sizes may be available. 5 - Roll lengths, areas and weights may vary.6 - Physical properties reflect industry standards. Roll data may reflect higher values than those listed above.T - Typical roll properties.
Environmental Nonwoven Paving Fabric
Properties ASTM MARV2 TEST UNIT AOL AOM AOH AOE
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 90 101 120 150Strength (N) (401) (450) (534) (668)
Grab Tensile D4632 % 50 50 50 50Elongation
Grab Asphalt D4632 lbs 90 101 N/A N/ASaturated mod (N) (401) (450)
Grab Asphalt D4632 % 50 50 N/A N/ASaturated mod
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 500 hrs
ASPHALT RETENTION AND MELTING POINT
Asphalt D6140 gal/yd2 0.25 0.25 0.25 0.30Retention (l/m2) (1.13) (1.13) (1.13) (1.36)
Melting D276 F 302 302 302 302 Point (C) (150) (150) (150) (150)
Change in area Tx 3099 % + / - + / - + / - + / -asphalt saturated change 15% 15% 15% 15%
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 3.5 4.1 4.6 6 (g/m2) (119) (140) (156) (203)
PACkAGING4,5 AOL AOM AOH AOE
Roll Width ft 10.5/12.5 10.5/12.5 10.5/12.5 10.5/12.5 (m) (3.20/3.81) (3.20/3.81) (3.20/3.81) (3.20/3.81)
Roll Length ft 360/360 360/360 360/360 360/360 (m) (110/110) (110/110) (110/110) (110/110)
Roll Area yd2 420/500 420/500 420/500 420/500 (m2) (351/418) (351/418) (351/418) (351/418)
Roll Weight lbs 125/145 143/167 159/186 207/243 (kg) (57/66) (65/76) (72/84) (94/110)
Properties ASTMMARV2 TEST UNIT 400EX 600EX 800EX 1000EX 1200EX 1600EX
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 105 160 220 270 320 425Strength (N) (467) (712) (979) (1202) (1424) (1891)
Grab Tensile D4632 % 50 50 50 50 50 50Elongation
Trapezoid D4533 lbs 45 65 90 100 120 150Tear (N) (200) (289) (401) (445) (534) (668)
CBR D6241 lbs 300 435 575 725 830 1200Punture (N) (1335) (1936) (2559) (3226) (3694) (5340)
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 70 70 500 hrs
HYDRAULIC PROPERTIES
Permitivity D4491 sec-1 2.0 1.5 1.4 1.2 0.9 0.5
Water Flow D4491 gpm/ft2 14.5 110 100 85 65 40Rate (l/min/m2) (5908) (4482) (4075) (3463) (2648) (1630)
Apparent US Sieve 70 80 100 100 100 100Opening D4751Size (AOS3 ) (mm) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150)
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 4.0 6 8 10 12 16 (g/m2) (136) (204) (271) (339) (407) (543)
PACkAGING4,5 400EX 600EX 800EX 1000EX 1200EX 1600EX
Roll Width ft 15 15 15 15 15 15 (m) (4.57) (4.57) (4.57) (4.57) (4.57) (4.57)
Roll Length ft 300 300 300 300 300 300 (m) (91) (91) (91) (91) (91) (91)
Roll Area yd2 500 500 500 500 500 500 (m2) (418) (418) (418) (418) (418) (418)
Roll Weight lbs 145 225 285 364 426 551 (kg) (66) (102) (129) (165) (193) (250)
TM
Properties ASTMMARV2 TEST UNIT 120EX 125EX 130EX 140EX 145EX 150EX 160EX 180EX 225EX 245EX 250EX 275EX 350EX
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 80 90 105 120 140 165 180 205 215 250 270 300 380Strength (N) (356) (401) (467) (534) (623) (734) (801) (912) (957) (1112) (1202) (1335) (1691)
Grab Tensile D4632 % 50 50 50 50 50 50 50 50 50 50 50 50 50Elongation
Trapezoid D4533 lbs 35 40 45 50 60 65 75 80 85 100 100 115 145Tear (N) (156) (178) (200) (223) (267) (289) (334) (356) (378) (445) (445) (512) (645)
CBR D6241 lbs 220 265 300 340 360 400 475 535 600 700 725 830 1050Puncture (N) (979) (1179) (1335) (1513) (1602) (1780) (2114) (2380) (2670) (3115) (3226) (3694) (4673)
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 70 70 70 70 70 70 70 70 70 500 hrs
HYDRAULIC PROPERTIES
Permitivity D4491 sec-1 2.2 2.1 2.0 1.8 1.5 1.5 1.5 1.5 1.3 1.2 1.2 0.9 0.7
Water Flow D4491 gpm/ft2 160 155 145 135 115 110 110 110 95 85 85 65 50Rate (l/min/m2) (6519) (6315) (5908) (5501) (4886) (4482) (4482) (4482) (3871) (3463) (3463) (2648) (2037)
Apparent US Sieve 70 70 70 70 70 80 100 100 100 100 100 100 100Opening D4751Size (AOS3 ) mm (0.212) (0.212) (0.212) (0.212) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150)
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 3.2T 3.5T 4.0T 4.5T 5.0T 6.0T 7.0T 8.0T 9.0T 10.0T 10.5T 12.0T 16.0T
(g/m2) (109T) ( 119T ) (136T) (153T) (170T) (204T) (237T) (271T) (305T) (339T) (356T) (407T) (543T)
Thickness D5199 mils (mm) 45T 50T 55T 60T 70T 75T 85T 90T 95T 100T 100T 120T 150T
(1.143T) (1.27T) (1.397T) (1.524T) (1.778T) (1.905T) (2.159T) (2.286T) (2.413T) (2.54T) (2.54T) (3.048T) (3.81T)
PACkAGING4,5 120EX 125EX 130EX 140EX 145EX 150EX 160EX 180EX 225EX 245EX 250EX 275EX 350EX
Roll Width ft 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 (m) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57)
Roll Length ft 360/360 360/360 360/360 360/360 360/300 360/300 360/300 360/300 360/300 360/300 360/300 360/300 360/300 (m) (110/110) (110/110) (110/110) (110/110) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91)
Roll Area yd2 500/600 500/600 500/600 500/600 500 500 500 500 500 500 500 500 500 (m2) (418/501) (418/501) (418/501) (418/501) (418) (418) (418) (418) (418) (418) (418) (418) (418)
Roll Weight lbs 120/140 129/141 145/170 161/189 176 208 239 270 301 333 348 395 520 (kg) (54/64) (59/64) (66/77) (73/86) (80) (94) (108) (122) (137) (151) (158) (179) (236)
Needle-punched Nonwoven
Civil Nonwoven
Needle-punched Nonwoven Specialty Products
1 - Contact your Thrace-LINQ distributor or representative for technical assistance and for products meeting AASHTO M288 specifications. Additional information can also be found at www.thracelinq.com. Methods and values may change without notice.2 - Minimum Average Roll Value. All values are MARV unless otherwise noted. 3 - AOS values are reported as Maximum Average Roll Value. 4 - Other products and roll sizes may be available. 5 - Roll lengths, areas and weights may vary.6 - Physical properties reflect industry standards. Roll data may reflect higher values than those listed above.T - Typical roll properties.
Environmental Nonwoven Paving Fabric
Properties ASTM MARV2 TEST UNIT AOL AOM AOH AOE
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 90 101 120 150Strength (N) (401) (450) (534) (668)
Grab Tensile D4632 % 50 50 50 50Elongation
Grab Asphalt D4632 lbs 90 101 N/A N/ASaturated mod (N) (401) (450)
Grab Asphalt D4632 % 50 50 N/A N/ASaturated mod
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 500 hrs
ASPHALT RETENTION AND MELTING POINT
Asphalt D6140 gal/yd2 0.25 0.25 0.25 0.30Retention (l/m2) (1.13) (1.13) (1.13) (1.36)
Melting D276 F 302 302 302 302 Point (C) (150) (150) (150) (150)
Change in area Tx 3099 % + / - + / - + / - + / -asphalt saturated change 15% 15% 15% 15%
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 3.5 4.1 4.6 6 (g/m2) (119) (140) (156) (203)
PACkAGING4,5 AOL AOM AOH AOE
Roll Width ft 10.5/12.5 10.5/12.5 10.5/12.5 10.5/12.5 (m) (3.20/3.81) (3.20/3.81) (3.20/3.81) (3.20/3.81)
Roll Length ft 360/360 360/360 360/360 360/360 (m) (110/110) (110/110) (110/110) (110/110)
Roll Area yd2 420/500 420/500 420/500 420/500 (m2) (351/418) (351/418) (351/418) (351/418)
Roll Weight lbs 125/145 143/167 159/186 207/243 (kg) (57/66) (65/76) (72/84) (94/110)
Properties ASTMMARV2 TEST UNIT 400EX 600EX 800EX 1000EX 1200EX 1600EX
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 105 160 220 270 320 425Strength (N) (467) (712) (979) (1202) (1424) (1891)
Grab Tensile D4632 % 50 50 50 50 50 50Elongation
Trapezoid D4533 lbs 45 65 90 100 120 150Tear (N) (200) (289) (401) (445) (534) (668)
CBR D6241 lbs 300 435 575 725 830 1200Punture (N) (1335) (1936) (2559) (3226) (3694) (5340)
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 70 70 500 hrs
HYDRAULIC PROPERTIES
Permitivity D4491 sec-1 2.0 1.5 1.4 1.2 0.9 0.5
Water Flow D4491 gpm/ft2 14.5 110 100 85 65 40Rate (l/min/m2) (5908) (4482) (4075) (3463) (2648) (1630)
Apparent US Sieve 70 80 100 100 100 100Opening D4751Size (AOS3 ) (mm) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150)
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 4.0 6 8 10 12 16 (g/m2) (136) (204) (271) (339) (407) (543)
PACkAGING4,5 400EX 600EX 800EX 1000EX 1200EX 1600EX
Roll Width ft 15 15 15 15 15 15 (m) (4.57) (4.57) (4.57) (4.57) (4.57) (4.57)
Roll Length ft 300 300 300 300 300 300 (m) (91) (91) (91) (91) (91) (91)
Roll Area yd2 500 500 500 500 500 500 (m2) (418) (418) (418) (418) (418) (418)
Roll Weight lbs 145 225 285 364 426 551 (kg) (66) (102) (129) (165) (193) (250)
TM
Properties ASTMMARV2 TEST UNIT 120EX 125EX 130EX 140EX 145EX 150EX 160EX 180EX 225EX 245EX 250EX 275EX 350EX
MECHANICAL PROPERTIES
Grab Tensile D4632 lbs 80 90 105 120 140 165 180 205 215 250 270 300 380Strength (N) (356) (401) (467) (534) (623) (734) (801) (912) (957) (1112) (1202) (1335) (1691)
Grab Tensile D4632 % 50 50 50 50 50 50 50 50 50 50 50 50 50Elongation
Trapezoid D4533 lbs 35 40 45 50 60 65 75 80 85 100 100 115 145Tear (N) (156) (178) (200) (223) (267) (289) (334) (356) (378) (445) (445) (512) (645)
CBR D6241 lbs 220 265 300 340 360 400 475 535 600 700 725 830 1050Puncture (N) (979) (1179) (1335) (1513) (1602) (1780) (2114) (2380) (2670) (3115) (3226) (3694) (4673)
ENDURANCE PROPERTIES
UV Stability D4355 % @ 70 70 70 70 70 70 70 70 70 70 70 70 70 500 hrs
HYDRAULIC PROPERTIES
Permitivity D4491 sec-1 2.2 2.1 2.0 1.8 1.5 1.5 1.5 1.5 1.3 1.2 1.2 0.9 0.7
Water Flow D4491 gpm/ft2 160 155 145 135 115 110 110 110 95 85 85 65 50Rate (l/min/m2) (6519) (6315) (5908) (5501) (4886) (4482) (4482) (4482) (3871) (3463) (3463) (2648) (2037)
Apparent US Sieve 70 70 70 70 70 80 100 100 100 100 100 100 100Opening D4751Size (AOS3 ) mm (0.212) (0.212) (0.212) (0.212) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150)
PHYSICAL PROPERTIES6
Weight D5261 oz/yd2 3.2T 3.5T 4.0T 4.5T 5.0T 6.0T 7.0T 8.0T 9.0T 10.0T 10.5T 12.0T 16.0T
(g/m2) (109T) ( 119T ) (136T) (153T) (170T) (204T) (237T) (271T) (305T) (339T) (356T) (407T) (543T)
Thickness D5199 mils (mm) 45T 50T 55T 60T 70T 75T 85T 90T 95T 100T 100T 120T 150T
(1.143T) (1.27T) (1.397T) (1.524T) (1.778T) (1.905T) (2.159T) (2.286T) (2.413T) (2.54T) (2.54T) (3.048T) (3.81T)
PACkAGING4,5 120EX 125EX 130EX 140EX 145EX 150EX 160EX 180EX 225EX 245EX 250EX 275EX 350EX
Roll Width ft 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 (m) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57) (3.81/4.57)
Roll Length ft 360/360 360/360 360/360 360/360 360/300 360/300 360/300 360/300 360/300 360/300 360/300 360/300 360/300 (m) (110/110) (110/110) (110/110) (110/110) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91) (110/91)
Roll Area yd2 500/600 500/600 500/600 500/600 500 500 500 500 500 500 500 500 500 (m2) (418/501) (418/501) (418/501) (418/501) (418) (418) (418) (418) (418) (418) (418) (418) (418)
Roll Weight lbs 120/140 129/141 145/170 161/189 176 208 239 270 301 333 348 395 520 (kg) (54/64) (59/64) (66/77) (73/86) (80) (94) (108) (122) (137) (151) (158) (179) (236)
TM
Geotextiles Nonwovens Capabilities
The Foundation to Build On™ Excellent products to do the job. The service to do it right.™
2550 West Fifth North St. • Summerville, SC 29483800.445.4675 • 843.873.5800 • Fax: 843.875.8276 www.thracelinq.com • [email protected]
Filtration – Thrace nonwoven geotextiles work in equilibrium with the soil, allowing adequate liquid flow with limited soil loss, while avoiding pore clogging.
Erosion Control – Thrace nonwoven geotextiles can be used independently or in conjunction with Thrace woven geotextiles to create geobags which provide erosion control of slopes, shoreline protection and riverbank flood control.
Reinforcement/Stabilization – Although soil maintains a consistent compressive, the strong tensile mechanical properties of Thrace geotextiles counterbalance soils’ poor tensile properties, improving the total system’s strength interaction. The high strength and low elongation of the fabrics are ideal for reinforcing embankments of roads, slopes and retaining walls.
Protection – Thrace nonwoven geotextiles offer perfect damage protection. Contact with sharp soil surfaces such as stones or subgrade unevenness harms geomembranes and other coated materials. Thrace nonwovens protect these materials using thickness and mass that are directly proportional to the amount of protection they offer.
Separation – Inserting Thrace flexible and porous geotextiles between dissimilar earth materials increases the integrity and function of both materials. The earth materials can then be improved or left intact.
Drainage – The balance between the soil and Thrace geotextile systems allows for adequate liquid flow, while maintaining limited soil loss. The hydraulic properties of the fabric are suitable to establish structural stability by controlling excess amounts of water during and after construction.
QualityEach Thrace manufacturing facility supplies advanced measurement and accuracy through detailed, hands-on process controls, expert tenured personnel and state-of-the-art warehousing. Thrace nonwovens stand at the forefront of quality.
Ready to Ship InventoryThrace nonwovens are manufactured on both sides of the Atlantic. Our vertically integrated production not only guarantees quality consistency, but also provides satisfactory lead times that meet our customers’ needs.
Civil NonwovensWe offer a full range of products from 3.2 ounces to 16 ounces / square yard for use in many civil applications, as specified by AASHTO.
• PavingFabrics• Separation• Stabilization• PermanentErosionControl• SubsurfaceDrainage
Features & Benefits
• EvenConsistentProtection• WideWidth,ReducingInstallation andMaximizingFreight• FewerSeamsandReducedInstallationCost
Features & Benefits
Paving FabricsWe offer a wide range of Paving Fabrics, from our AASHTO M288 approved AOM to our recently developed 133 CBI Pavement Interlayer.
• DelaytheFormationofReflectiveCracking• AbsorbandDissipateStress• ProvideaMoistureBarrier• ExtendtheLifeofDistressedPavements• OfferEconomical,Long-lastingRehabilitation
Features & Benefits
Environmental NonwovensGeotextiles from 4 ounces to 16 ounces / square yard are available in fabric widths up to 17 feet wide. Reduced seams and increased loading provide unique advantages and savings on these quality intensive projects.
Please do not hesitate to call us if you have a question, need a sample or require a quote on a needle-punched nonwoven product.
