Intellectual Property (Part B): Plagiarism. Z6njI/AAAAAAAAAG0/CLqjRDQF0cg/s320/plagiarism600pxw.jpg
GeoSurveyor Mobile Bluetooth Connection to S320 · 89. Device: Internal nL400 Microhard 90. Message...
Transcript of GeoSurveyor Mobile Bluetooth Connection to S320 · 89. Device: Internal nL400 Microhard 90. Message...
S320 Bluetooth Connect to GeoSurveyor Mobile Page 1 of 19 PN 874-0302-000 Rev: Mar 5, 2014
GeoSurveyor Mobile Bluetooth Connection to S320 Part Number 874-0302-000 Revised: March 5, 2014
Overview This document describes how to establish and retain a Bluetooth connection between GeoSurveyor Mobile, (SurvCE) software on the XF2 data collector and the S320 GNSS receiver. These instructions are also valid for the older XF1 data collectors running the SurvCE software and other Windows Mobile 6.5 Professional data collectors.
Procedure
Screenshot or Graphic Step
1. To create a Bluetooth connection between GeoSurveyor Mobile SW and the S320 GNSS Base receiver, turn on the S320 GNSS receiver, turn on the XF2 data collector, start the GeoSurveyor Mobile, (SurvCE) SW.
2. The S320 GNSS receiver has two internal Class 2 Bluetooth modules.
3. The S320 GNSS receiver and the XF2 data collector must be within +/- 30 feet of each other to establish and maintain a Bluetooth connection.
4. Hemisphere GNSS GeoSurveyor Mobile start up-splash-logo screen.
S320 Bluetooth Connect to GeoSurveyor Mobile Page 2 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
5. File > 1 Job menu,
6. Select/Tap Continue Last Job
7. Loading Job…
8. Job Settings > System menu,
9. Current Distance units are displayed,
10. Current Projection / Coordinate System is displayed.
11. Job Settings > System menu,
12. If necessary, select/tap
[Edit Projection List] menu bar, select appropriate Coordinate System for the current Job.
S320 Bluetooth Connect to GeoSurveyor Mobile Page 3 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
13. Job Settings > New Job,
14. Job Settings > Format menu,
15. Select Coordinate Display Order: and other display settings as needed,
16. Job Settings > Options menu,
17. Select Options as needed,
18. Job Settings > Stake,
19. Select options as needed,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 4 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
20. Job Settings > Loading selected options,
21. Equip > 2 GPS Base menu,
22. GPS Base | Current menu,
23. Manufacturer: Hemisphere GNSS
24. Model: S320
25. GPS Base | Comms menu,
26. Type: Bluetooth
27. BT Type: Windows Mobile
28. Device: [ ]
29. Select/tap the Tool Menu icon button,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 5 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
30. Bluetooth Devices menu,
Select Base BT Device,
31. Select/tap [ Find Device ] button-bar,
32. Looking for BT devices…
33. Make sure your S320 GNSS Base receiver is powered ON and within range, +/- 30 feet.
34. Looking for BT devices
35. Name: HGPS S320 186xxxx
36. Note: when you initiate the Bluetooth search, the actual Serial Number of your S320 GNSS receiver found will be displayed here.
37. Bluetooth Devices
Please select from these available devices,
38. Several Bluetooth devices were located, select the actual serial number of your HGPS S320 186xxxx
S320 Bluetooth Connect to GeoSurveyor Mobile Page 6 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
39. Bluetooth Devices menu,
Please select from these available devices,
40. Select HGPS S320 186xxxx,
41. Select/tap the green check mark to continue,
42. Multiple Bluetooth ports found,
Please select which Bluetooth port to use,
43. Select the option, Any Available Port
44. Select/tap the green check mark to continue
45. Multiple Bluetooth ports found menu,
46. Select Any Available Port
47. Select/tap the green check mark to continue,
48. Bluetooth Devices | Select Base BT Device menu,
49. Select HGPS S320 186xxxx
50. Select/tap [ Set Device Pin ] button-bar,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 7 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
51. Configure BT Device PIN,
52. Using the data collector stylus, tap into the Enter BT Device PIN: template,
53. Enter Data menu,
54. Using the data collector stylus, tap into the dialog template, the virtual keyboard will pop open, manually enter 4-zeros, 0000,
55. Configure BT Device PIN:
56. Enter BT Device’s PIN: 0000
57. Select/tap the green check mark to continue,
58. Bluetooth Devices menu,
59. Select Base BT Device menu,
60. Receiver Name: HGPS S320 186xxxx
61. Select/tap [ Set Device Name ] button- bar,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 8 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
62. Name: menu
63. Name: HGPS S320 186xxxx,
64. Enter data menu,
65. Using the data collector stylus, select/tap into the dialog template, the virtual keyboard will pop open, HGPS S320 186xxxx is displayed,
66. Name:
67. Name template > manually rename the BT Device Name to HGPS 186xxxx BAS
68. Add the Suffix BAS
69. Renaming the Base BT Device adding BAS suffix, will help remind the user which S320 Serial number is being deployed as the RTK Base receiver.
70. Bluetooth Devices
71. Select Base BT Device menu,
72. Select the Receiver Name: S320 186xxxx BAS
73. Select/Tap the Bluetooth icon,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 9 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
74. Bluetooth Devices menu,
75. Bonding with Bluetooth…
76. GPS Base > Receiver menu,
77. Select the HEMS320 Antenna model,
78. Measure and enter the S320 RTK Base Antenna height, select the appropriate Antenna measurement, ( ) Vertical or ( •) Slant
79. If using conventional survey tripod & Tribrach > Select (•) Slant
80. DGPS Type: None
81. Select/tap the Antenna details icon to reveal the selected GNSS antenna properties,
82. The Radius, SHMP, (Slant Height Measurement Point), L1 Offset and L2 Offset values are displayed,
83. Select/tap the green check mark to continue,
84. GPS Base menu > Receiver menu,
85. Select the HEMS320 antenna model
86. Measure and enter the S320 Antenna Height,
87. DGPS Type: None
S320 Bluetooth Connect to GeoSurveyor Mobile Page 10 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
88. GPS Base > RTK menu,
89. Device: Internal nL400 Microhard
90. Message Type: RTCM v3.0
91. Select/tap the green check mark to continue,
92. Configuring base…
93. Configuring base,
Selecting Modem/Radio…
94. Base Configuration
95. From New Position menu,
This completes the required steps to create the Bluetooth connection between the data collector and the S320 Base, Select/tap the red X to exit.
The next step, create the Bluetooth connection between the data collector and the S320 RTK Rover.
S320 Bluetooth Connect to GeoSurveyor Mobile Page 11 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
96. Equip > 3 GPS Rover,
97. GPS Rover > Current menu,
98. Manufacturer: Hemisphere GNSS
99. Model: S320,
100. GPS Rover > Comms
101. Type: Bluetooth
102. BT Type: Windows Mobile
103. Select/tap the Tools menu icon,
104. Bluetooth Devices
Select Rover BT Device,
105. Select/tap [Find Device ]
button-bar,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 12 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
106. Bluetooth Devices
Looking for BT devices…
Looking for Bluetooth devices.
107. Looking for Bluetooth devices…
108. Name: HGPS S320 186xxxx
found,
109. Bluetooth Devices
Please select from these available devices
110. Bluetooth Devices
Please select from these available devices
111. Select your HGPS S320 186xxxx
serial number,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 13 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
112. Bluetooth Devices
Select Rover BT Device
HGPS S320 186xxxx
113. Select/tap [Set Device Pin ]
Button-bar,
114. Configure BT Device’s PIN
115. Using the data collector stylus
Tap into the blank template [ ],
116. Enter data
117. The virtual keyboard will pop
Open, manually enter 4-zeros, 0000
Tap the green check mark to continue,
118. Configure BT Device PIN
Enter BT Device’s Pin: 0000
S320 Bluetooth Connect to GeoSurveyor Mobile Page 14 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
119. Bluetooth Devices
Select Rover BT Device
HGPS S320 186xxxx
120. Name:
Name:
[ HGPS S320 186xxxx ]
Using the stylus, tap into the template,
121. The virtual keyboard will pop
Open and display HGPS S320 186xxxx
122. Enter data
Tap into the template, manually enter the name S320 186xxxx ROV
123. Tap the green check mark to
continue,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 15 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
124. Name:
125. Name:
[ S320 186xxxx ROV ]
Renaming the Rover BT Device adding ROV suffix, will help remind the user which S320 Serial number is being deployed as the RTK Rover receiver.
126. Bluetooth Devices
127. Select Rover BT Device
128. S320 186xxxx ROV
129. Tap/select the Bond Bluetooth
Icon,
130. Bluetooth Devices
131. Bonding with Bluetooth….
132. GPS Rover | Comms menu
133. Type: Bluetooth
BT Type: Windows Mobile
Device: S320 186xxx ROV
S320 Bluetooth Connect to GeoSurveyor Mobile Page 16 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
134. GPS Rover | Receiver
135. Connecting to Instrument
136. GPS Rover | Receiver menu
137. Select the HEMS320 Antenna
Model
138. Measure and enter the S320 RTK Rover Antenna height, select the appropriate Antenna measurement, ( •) Vertical or ( ) Slant
If using 2-Meter RTK Pole, select (• ) Vertical
139. DGPS Type: None
140. Enter data
141. Using the stylus, tap into the
Antenna Height template, the virtual keyboard will pop open, manually enter 2.000, tap the green check to continue,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 17 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
142. GPS Rover | Receiver menu,
143. GPS Rover | RTK menu,
144. Device: Select Internal nL400
Microhard,
145. Tap the green check mark to
Continue,
[√] Use Any Base ID
146. Equip > Configuring rover
Selecting Modem/Radio,
147. Equip > Configuring rover
Configuring rover
S320 Bluetooth Connect to GeoSurveyor Mobile Page 18 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
148. Equip > Configuring rover
Save complete.
This completes the required steps to create the Bluetooth connection between the data collector and the S320 RTK Rover.
149. The user is now ready to start the
RTK Rover survey, return to the SurvCE main menu,
150. Survey > 1 Store Points menu,
151. The user can check the SurvCE
Version,
152. Equip > 0 About SurvCE
153. About SurvCE menu,
154. Select/Tap the Return arrow to
Return the SurvCE main menu,
S320 Bluetooth Connect to GeoSurveyor Mobile Page 19 of 19 PN 874-0302-000 Rev: Mar 5, 2014
Screenshot or Graphic Step
155. Survey > 1 Store Points
Further Information The Hemisphere GNSS Technical Support team in Scottsdale, AZ, USA has created these Quick Reference Guides for your convenience. If you need first-level technical support, please contact your regional Hemisphere GNSS - Distributor/Dealer. If you need second-level technical support, you can contact Hemisphere GNSS Technical Support at [email protected] to request additional technical support. This document is provided for technical support purposes only. Refer to the product documentation for warranty, license, and safety information associated with the product.