Geometry Sections 1.2 & 2.1 The Building Blocks of Geometry
-
Upload
zenaida-stephenson -
Category
Documents
-
view
20 -
download
1
description
Transcript of Geometry Sections 1.2 & 2.1 The Building Blocks of Geometry
Webster’s New World Dictionary, Third College Edition, gives the following definitions.
turn:
rotate:
revolve:
to rotate or revolve
to turn or cause to turn
to turn
point: Usually described as a dot but actually has no size. Named by a capital letter.
Note: When you see a capital letter in a figure, it represents a point even if the point is not drawn.
line: A set of points that continues on without end in two opposite directions. Named by a single lower case letter ( )or any two points on the line ( ).
mor m lineBAor AB
plane:
A set of points that extends without end in 2 dimensions. Named by a single capital letter placed in a corner ( )or by 3 points that do not all liein the same line ( )
mor m plane
BCA plane
In the description of a plane, we talked about 3 points not on the
same line. Three points not on the same line are called ___________.noncollinear
Just as undefined terms are the starting point for the vocabulary of geometry, postulates are going to be the starting point for the rules of geometry. A postulate or axiom is
a statement that is accepted as true without proof.
Postulate 5: Through any two points there is exactly one line.
What important idea about lines is indicated by this postulate?
lines must be straight
Postulate 8: Through any three noncollinear points there is exactly
one line.What if the three points were collinear?
infinitely many planes contain collinear points
Postulate 10: If two points lie in a plane then the line containing
them is in the plane.What important idea about planes is indicated by this
postulate?
planes must be flat
Postulate 1.1.5: If two planes intersect, then their intersection is
a line.
What important idea about planes is indicated by this postulate?
planes continue on without end
While it certainly may seem as though these postulates are not saying anything of any real importance, nothing could be farther from the truth. These postulates are in fact the basis of Euclidean geometry. For Euclid, planes are a flat surface like the floor and lines are straight like your pen or pencil. But what if we thought of a plane as being the surface of a sphere (i.e. the globe) and lines as being great circles on the sphere (i.e. the equator or any lines of longitude). Such thinking results in a whole different type of geometry called spherical geometry.
Example: Determine if the given set of points are collinear, coplanar, both or neither.1) B, D
2) E, F, A
3) B, C, D, E
4) E, F, G, A
both
coplanar
neither
coplanar
A line segment or segment is part of a line that begins at one point and ends at a second. Segments are named by
their two endpoints ( ).
BAor AB
A ray is a part of a line that begins at one point and extends infinitely in one direction. Rays are named
by their endpoint and another point on the ray (________).BCor BA
The intersection (symbol: ______) of two (or more) geometric figures is the set of points that are in both
figures at the same time.
The union (symbol: ______) of two (or more) geometric figures is the set of points that are in one figure
or the other or both.