GENUS MEGAduct™ - Plura InnovationsGENUS SubTerra and GENUS family of cable management products....
Transcript of GENUS MEGAduct™ - Plura InnovationsGENUS SubTerra and GENUS family of cable management products....
Product: GENUS MEGAduct™
Information Flyer // CMFLY001
GENUSMEGAduct™
Next Generation Cable Routing
Solutions
Page 2
GENUS MEGAduct™GENUS MEGAduct™ is the next generation in cable ducts, designed to work seamlessly with the GENUS SubTerra™ and GENUS™ family of cable management products.
The MEGAduct™ is a high strength multiple bore duct system comprised within a single duct bank. Ranging from 4 to 9 duct bores of predominantly 110mm equivalent duct Size. Produced from recycled polypropylene, the MEGAduct™ creates a strong and lightweight alternative to traditional ducting and allows for a fast installation time on site without the need for expensive imported backfills.
MEGAduct™ is produced in 1 metre lengths, with a male and female end and is jointed using our simple pre-attached, clasp system, much like on a tool box lid. MEGAduct™ is ideal for shallow burial (when compared with traditional duct), under roads and rail tracks. But is equally at home providing a cable route on the outside of bridges.
GENUS MEGAduct™ Explained
Factory Fitted Clasp
Multiple Bores
Male Spigot
1m Lengths
1m Lengths
1m Lengths
Female Socket
Structural Outer Ribs
High Crush Strength
Key Features
Simple Jointing SystemEach MEGAduct™ has a male and female socketed connection and secures using the pre-fitted clasps.
Various Sizes4 way, 4 way XL, 6 way and 9 way.
Fast InstallationEliminating duct bank spacers, MEGAduct™ can be installed in long runs with much reduced construction times when compared with traditional ducting
LightweightMoulded from recycled Polypropylene in one metre lengths; Ducts weigh less than 25kg and are therefore easy to handle on site.
StrongMEGAduct™ is a structural system, much like all GENUS™ products. Strategically ribbed and with thicker walls than traditional ducting, it provides for much higher mechanical resistance to crushing. Therefore it can be buried shallower and without the need for structural backfill.
Squared Duct BoresMEGAduct™ bores are a radiused square compared to traditional circular bores, they provide for up to 25% more internal space and therefore increased cable capacity.
Made In The UKAll our products are produced in the UK, reducing carbon footprint, shipping costs and lead times.
Reduced Trench Size The multi-way design does not require duct spacers for placing of backfill surround, so trench sizes can be greatly reduced.
Page 4
GENUS MEGAduct™ MEGAduct™ is suitable for use in all infrastructure sectors, where multiple cable routes are Required.
GENUS MEGAduct™ Applications
MEGAduct™ is perfect for any infrastructure project that requires cable ducting. Below are the 4 most common uses for the MEGAduct™.
RAIL TELECOM POWER HIGHWAY
Under RailCrossings
Under RoadCrossings
Multiple Linear Duct Runs
Bridge Crossings
Image 2555 - prefitted socket with subterraBox sticking out of ground - railunderroad - brown earth photoClean up dirt image
Key feature of stacked boxes for transport
RAIL APPLICATION
Lower your costs
Due to the strength of MEGAduct™, no imported backfill is required. Graded as dug material can be used as backfill, lowering costs.
Feature Focus - No Imported BackfillLINEAR DUCT RUNS
Page 6
MEGAduct9™
MEGAduct6™ Adaptor for turning cables without an access chamber
MEGAduct™ will be available in 3 bore configurations and 2 bore sizes, currently available as MEGAduct6™, the other configurations will soon be in production.
A range of accessories for MEGAduct™ is available, to provide for additional connection options.
MEGAduct™ AdaptorUsed in converting a MEGAduct™ into single ducts for cornering and/or splitting off ducts in different directions.
MEGAduct™ Double SocketA female to female socket for joining two opposing MEGAduct™.
SUBTerra™ PairingThe perfect combination with SUBTerra™ Access Chambers; where pre-fitted MEGAduct™spurs can be pre-factory fitted.
MEGAduct™ Double Spigot A male to male spigot for joining two opposing MEGAduct™.
MEGAduct6™
MEGAduct4™
MEGAduct4XL™
AVAILABLE NOW
COMING SOON
GENUS MEGAduct™ Options
100
100
248
354
50
100
0
Multiway 6 - Concept Design MultiWay6DRAWING NUMBER:
Title/NameREVISIONS
Date Modified Changes Made Material:
Finish:
Drawn by:
Date:
Scale:
Weight:
Revision No.
Drawing Sheet Size:A3
N/A
N/A
A01/06/2018
Sheet 1 of 1
NTS
N/AGraeme Pringle
100
100
248
354
50
1000
Multiw
ay 6 - Concept D
esignM
ultiWay6
DRAW
ING
NUM
BER: Title/N
ame
REVISION
SDate M
odifiedC
hanges Made
Material:
Finish:
Drawn by:
Date:
Scale:
Weight:
Revision No.
Drawing Sheet Size:
A3
N/A
N/AA
01/06/2018
Sheet 1 of 1
NTS
N/A
Graem
e Pringle
a
COMING SOON
z
y
x
Transportation and Storage
As MEGAduct™ is palletised, it is very easy to move & ship, and efficient on storage space. It is also easily containerised for international shipping.
Feature Focus - Simple to Store and ShipGENUS MEGAduct™
COMING SOON
TYPE BORE # BORE SIZE mm (a)
UNIT SIZE mm (xyz)
MEGAduct4 4 110 1000 x 248 x 248
MEGAduct4XL 4 160 1000 x 354 x 354
MEGAduct6 6 110 1000 x 354 x 248
MEGAduct9 9 110 1000 x 354 x 354
Page 8
Contact us:Plura InnovationsUnit 5 Johnsons EstateTarran Way SouthTarron Way Industrial EstateMoretonWirral CH46 4TP
Telephone: 0151 522 0535Email: [email protected]
www.plurainnovations.com
https://www.plurainnovations.com/products/megaduct