General Steels
-
Upload
pandu123456 -
Category
Documents
-
view
246 -
download
1
Transcript of General Steels
Equal Angle
www.austenknapman.co.uk
1
Size (mm) Kg/M Mtr/Ton
13x13x3 0.55 181816x16x3 0.71 140820x20x3 0.88 113625x25x3 1.11 90125x25x5 1.77 56530x30x3 1.36 73530x30x5 2.18 45940x40x3 1.84 54340x40x5 2.97 33740x40x6 3.52 28445x45x5 3.38 29645x45x6 4 25050x50x3 2.33 42950x50x5 3.77 26550x50x6 4.47 22450x50x8 5.82 17260x60x6 5.42 18560x60x8 7.09 14160x60x10 8.69 11570x70x6 6.38 15770x70x8 8.36 12070x70x10 10.3 9775x75x6 6.86 14675x75x10 11 9180x80x6 7.34 13680x80x8 9.63 10480x80x10 11.9 8490x90x6 8.3 12090x90x8 10.9 9290x90x10 13.4 75100x100x8 12.2 82100x100x10 15 67100x100x12 17.8 56100x100x15 21.9 46120x120x8 14.7 68
Size (mm) Kg/M Mtr/Ton
120x120x10 18.2 55120x120x12 21.6 46120x120x15 26.6 38150x150x10 23 43150x150x12 27 37150x150x15 33.8 30150x150x18 40.1 25200x200x12 36.74 27200x200x16 48.5 21200x200x18 54.2 18200x200x20 59.9 17200x200x24 71.1 14
Stock lengths subject to availability: 6.1mtr and 12.2mtr length
Unequal Angle
T 01803 664020 F 01803 663128
2
Size (mm) Kg/M Mtr/Ton
40x25x5 2.37 42250x40x5 3.37 29760x30x5 3.37 29765x50x6 5.16 19475x50x6 5.65 17775x50x8 7.39 13580x60x8 8.34 120100x65x7 8.77 114100x65x8 9.94 101100x65x10 12.3 81100x75x8 10.6 94100x75x10 13 77125x75x8 12.2 82125x75x10 15 67125x75x12 17.8 56150x75x10 17 59150x75x12 20.2 50150x75x15 24.8 40150x90x10 17 58150x90x12 18.2 55200x100x10 23 43200x100x12 27.3 37200x100x15 33.7 30200x150x12 32 31200x150x15 39.6 25200x150x18 47.1 21
Stock lengths subject to availability: 6.1mtr and 12.2mtr length
Flats
www.austenknapman.co.uk
3
Size (mm) Kg/M Mtr/Ton
10x3 0.26 384613x3 0.33 303016x3 0.39 256420x3 0.49 204125x3 0.63 158730x3 0.75 133340x3 0.95 105350x3 1.25 80060x3 1.44 69465x3 1.53 65480x3 1.89 529100x3 2.36 424130x3 3.06 327150x3 3.54 282
13x5 0.51 196116x5 0.63 158720x5 0.79 126625x5 0.98 102030x5 1.18 84740x5 1.57 63750x5 1.96 51060x5 2.36 42470x5 2.76 36280x5 3.14 31890x5 3.53 283100x5 3.93 254130x5 5.11 196150x5 5.89 170
13x6 0.61 163916x6 0.75 133320x6 0.94 106425x6 1.18 84730x6 1.41 70940x6 1.88 53250x6 2.36 42460x6 2.83 35365x6 3.06 32770x6 3.31 30275x6 3.55 28280x6 3.77 26590x6 4.24 236100x6 4.71 212120x6 5.66 177130x6 6.12 163150x6 7.09 141180x6 8.48 118200x6 9.42 106220x6 10.36 97
Size (mm) Kg/M Mtr/Ton
250x6 11.78 85300x6 14.13 71
20x8 1.26 79425x8 1.57 63730x8 1.88 53240x8 2.51 39850x8 3.14 31860x8 3.77 26565x8 4.08 24570x8 4.39 22875x8 4.71 21280x8 5.02 19990x8 5.65 177100x8 6.28 159120x8 7.54 133130x8 8.16 123150x8 9.42 106180x8 11.31 88200x8 12.59 79220x8 13.82 72250x8 15.69 64300x8 18.84 53
20x10 1.57 63725x10 1.96 51030x10 2.36 42440x10 3.14 31850x10 3.93 25460x10 4.71 21265x10 5.11 19670x10 5.49 18275x10 5.89 17080x10 6.28 15990x10 7.07 141100x10 7.85 127120x10 9.42 106130x10 10.21 98150x10 11.78 85160x10 12.56 80180x10 14.13 71200x10 15.69 64220x10 17.27 58250x10 19.59 51300x10 23.55 42350x10 27.48 36400x10 31.41 32
20x12 1.88 53225x12 2.36 424
Flats
T 01803 664020 F 01803 663128
4
- continued
Size (mm) Kg/M Mtr/Ton
30x12 2.83 35340x12 3.77 26550x12 4.72 21260x12 5.65 17765x12 6.12 16370x12 6.59 15275x12 7.05 14280x12 7.54 133100x12 9.42 106120x12 11.31 88130x12 12.25 82150x12 14.13 71180x12 16.96 59200x12 18.84 53220x12 20.72 48250x12 23.55 42300x12 28.26 35350x12 33.01 30400x12 37.68 27450x12 42.39 24
40x15 4.71 21250x15 5.89 17060x15 7.07 14180x15 9.42 106100x15 11.78 85120x15 14.09 71130x15 15.31 65150x15 17.66 57180x15 21.22 47200x15 23.55 42220x15 25.91 39250x15 29.44 34300x15 35.33 28350x15 41.25 24400x15 47.09 21
40x20 6.28 15950x20 7.85 12760x20 9.42 10665x20 10.21 9870x20 10.99 9175x20 11.81 8580x20 12.56 80100x20 15.72 64120x20 18.84 53130x20 20.41 49150x20 23.55 42180x20 28.26 35200x20 31.41 32
Size (mm) Kg/M Mtr/Ton
220x20 34.54 29250x20 39.25 25300x20 47.15 21350x20 54.95 18400x20 62.81 16
40x25 7.85 12750x25 9.81 10260x25 11.78 8565x25 12.76 7870x25 13.74 7375x25 14.71 6880x25 15.71 6490x25 17.68 57100x25 19.63 51120x25 23.55 42130x25 25.51 39140x25 27.48 36150x25 29.44 34180x25 35.33 28200x25 39.25 25220x25 43.18 23250x25 59.97 20300x25 58.88 17400x25 78.51 13
40x30 9.42 10645x30 10.65 9450x30 11.78 8560x30 14.13 7165x30 15.31 6570x30 16.49 6175x30 17.71 5680x30 18.84 5390x30 21.22 47100x30 23.55 42120x30 28.35 35130x30 30.62 33150x30 35.33 28180x30 42.39 24200x30 47.11 21220x30 51.81 19250x30 58.88 17300x30 70.65 14350x30 82.43 12400x30 94.21 11
50x40 15.71 6460x40 18.84 5365x40 20.41 49
www.austenknapman.co.uk
5Flats
- continued
Size (mm) Kg/M Mtr/Ton
70x40 21.96 4680x40 25.12 40100x40 31.41 32150x40 47.11 21180x40 56.52 18
100x50 39.25 25150x50 58.88 17200x50 78.51 13
T 01803 664020 F 01803 663128
6 Square/Rounds/Specials
Size(mm)
Weight(Kg/m)
Mtr/Ton
38x10 1.95 513
51x13 4.17 240
Feather edge convex
Size(mm)
Weight(Kg/m)
Mtr/Ton
38x13x6.4 3.18 314
51x13x6.4 4.17 240
Half Round Square edge
Size(mm)
Weight(Kg/m)
Mtr/Ton
25x25x3 1.19 840
30x30x5 2.16 463
40x40x5 2.96 338
50x50x6 4.76 210
Tee section
Size(mm)
Weight(Kg/m)
Mtr/Ton
10 0.79 1266
12 1.13 885
16 2.01 498
20 3.14 318
25 4.91 204
30 7.07 141
35 9.62 104
40 12.6 79
45 15.9 63
50 19.62 51
60 28.4 35
65 33.16 30
70 39.1 26
75 44.2 23
80 50.2 20
90 63.6 16
100 78.5 13
Square solid Round solid
Size (mm) Kg/M Mtr/Ton
6 0.22 45458 0.39 256410 0.62 161312 0.89 112416 1.58 63320 2.47 40522 2.98 33625 3.85 26030 5.55 18032 6.31 15835 7.55 13240 9.86 10150 15.41 65
www.austenknapman.co.uk
7Heavy Section Definitions
Universal Beams (UB):
I shaped beam, also known sometimes as an H section beam. It is commonlymisconceived as being a U shaped beam. However, this is not the case.
Universal beams are always higher than their width, with sizes ranging from 127mmhigh to 915mm high.
Dimensions: The first dimension is always the height - 2nd dimension is always thewidth and the third dimension is always the kilo-grams per metre weight.
Universal Columns (UC):
Also commonly known as an I section beam or an H section beam.
It is not a universal channel which is a common misconception - sizes range from100mm high to 305mm high.
Originally, these were designed for use as posts or columns, but today it is morefrequently used as a common beam.
This is mainly due to its reduced height and increased strength as a beam.
Dimensions - UC’s come in standard sizes and its height and width are always thesame.
Parallel Flange Channel (PFC):
C shaped beam - not to be confused with a Universal Column.
Sizes range from 50mm high to 400mm high.
The old term for PFC was RSC or rolled steel channel, so this may still be requested.
For all of the above see pages 63-70 for fabrication options.
T 01803 664020 F 01803 663128
8 Universal Beams
Size (mm) Kg/m Mtr/TonDepth h
(mm)Width b
(mm)Web s(mm)
Flange t(mm)
RootRadius r
(mm)
127x76x13 13 77 127 76 4 7.6 7.6
152x89x16 16 63 152.4 88.7 4.5 7.7 7.6
178x102x19 19 53 177.8 101.2 4.8 7.9 7.6
203x102x23 23 43 203.2 101.8 5.4 9.3 7.6
203x133x25 25 40 203.2 133.2 5.7 7.8 7.6
203x133x30 30 33 206.8 133.9 6.4 9.6 7.6
254x102x22 22 45 254 101.6 5.7 6.8 7.6
254x102x25 25 40 257.2 101.9 6 8.4 7.6
254x102x28 28 35 260.4 102.2 6.3 10 7.6
254x146x31 31 32 251.4 146.1 6 8.6 7.6
254x146x37 37 27 256 146.4 6.3 10.9 7.6
254x146x43 43 23 259.6 147.3 7.2 12.7 7.6
305x102x25 25 40 305.1 101.6 5.8 7 7.6
305x102x28 28 35 308.7 101.8 6 8.8 7.6
305x102x33 33 30 312.7 102.4 6.6 10.8 7.6
305x127x37 37 27 304.4 123.4 7.1 10.7 8.9
305x127x42 42 24 307.2 124.3 8 12.1 8.9
305x127x48 48 21 311 125.3 9 14 8.9
305x165x40 40 25 303.4 165 6 10.2 8.9
305x165x46 46 22 306.6 165.7 6.7 11.8 8.9
305x165x54 54 19 310.4 166.9 7.9 13.7 8.9
356x127x33 33 30 349 125.4 6 8.5 10.2
356x127x39 39 26 353.4 126 6.6 10.7 10.2
356x171x45 45 22 351.4 171.1 7 9.7 10.2
356x171x51 51 20 355 171.5 7.4 11.5 10.2
356x171x57 57 18 358 172.2 8.1 13 10.2
356x171x67 67 15 363.4 173.2 9.1 15.7 10.2
406x140x39 39 26 398 141.8 6.4 8.6 10.2
406x140x46 46 22 403.2 142.2 6.8 11.2 10.2
406x178x54 54 18 402.6 177.7 7.7 10.9 10.2
h
b
s
r
t
www.austenknapman.co.uk
9Universal Beams
- continued
Size (mm) Kg/m Mtr/TonDepth h
(mm)Width b
(mm)Web s(mm)
Flange t(mm)
RootRadius r
(mm)
406x178x60 60 17 406.4 177.9 7.9 12.8 10.2
406x178x67 67 15 409.4 178.8 8.8 14.3 10.2
406x178x74 74 13 412.8 179.5 9.5 16 10.2
457x152x52 52 19 449.8 152.4 7.6 10.9 10.2
457x152x60 60 17 454.6 152.9 8.1 13.3 10.2
457x152x67 67 15 458 153.8 9 15 10.2
457x152x74 74 13 462 154.4 9.6 17 10.2
457x152x82 82 12 465.8 155.3 10.5 18.9 10.2
457x191x67 67 15 453.4 189.9 8.5 12.7 10.2
457x191x74 74 13 457 190.4 9 14.5 10.2
457x191x82 82 12 460 191.3 9.9 16 10.2
457x191x89 89 11 463.4 191.9 10.5 17.7 10.2
457x191x98 98 10 467.2 192.8 11.4 19.6 10.2
533x210x82 82 12 528.3 208.8 9.6 13.2 12.7
533x210x92 92 11 533.1 209.3 10.1 15.6 12.7
533x210x101 101 10 536.7 210 10.8 17.4 12.7
533x210x109 109 9 539.5 210.8 11.6 18.8 12.7
533x210x122 122 8 544.5 211.9 12.7 21.3 12.7
610x229x101 101 10 602.6 227.6 10.5 14.8 12.7
610x229x113 113 9 607.6 228.2 11.1 17.3 12.7
610x229x125 125 8 612.2 229 11.9 19.6 12.7
610x229x140 140 7 617.2 230.2 13.1 22.1 12.7
610x305x149 149 7 612.4 304.8 11.8 19.7 16.5
610x305x179 179 6 620.2 307.1 14.1 23.6 16.5
610x305x238 238 4 635.8 311.4 18.4 31.4 16.5
686x254x125 125 8 677.9 253 11.7 16.2 15.2
686x254x140 140 7 683.5 253.7 12.4 19 15.2
686x254x152 152 7 687.5 254.5 13.2 21 15.2
686x254x170 170 6 962.9 255.8 14.5 23.7 15.2
762x267x147 147 7 754 265.2 12.8 17.5 16.5
762x267x173 173 6 762.2 266.7 14.3 21.6 16.5
762x267x197 197 5 769.8 268 15.6 25.4 16.5
838x292x176 176 6 834.9 291.7 14 18.8 17.8
838x292x194 194 5 840.7 292.4 14.7 21.7 17.8
838x292x226 226 4 850.9 293.8 16.1 26.8 17.8
914x305x201 201 5 903 303.3 15.1 20.2 19.1
914x305x224 224 4 910.4 304.1 15.9 23.9 19.1
914x305x253 253 4 918.4 305.5 17.3 27.9 19.1
914x305x289 289 3 926.8 307.7 19.5 32 19.1
914x419x343 343 3 911.8 418.5 19.4 32 24.1
914x419x388 388 3 921 420.5 21.4 36.6 24.1
Stock lengths subject to availability:9.5mtr, 11mtr, 12.2mtr, 14 mtr, 15.3mtr and 18.3mtr
T 01803 664020 F 01803 663128
10 Universal Columns
Size (mm) Kg/m Mtr/TonDepth h
(mm)Width b
(mm)Web s(mm)
Flange t(mm)
RootRadius r
(mm)
152x152x23 23 43 152.4 152.2 5.8 6.8 7.6
152x152x30 30 33 157.6 152.9 6.5 9.4 7.6
152x152x37 37 27 161.8 154.4 8 11.5 7.6
203x203x46 46.1 22 203.2 203.6 7.2 11 10.2
203x203x52 52 19 206.2 204.3 7.9 12.5 10.2
203x203x60 60 17 209.6 205.8 9.4 14.2 10.2
203x203x71 71 14 215.8 206.4 10 17.3 10.2
203x203x86 86.1 12 222.2 209.1 12.7 20.5 10.2
254x254x73 73.1 14 254.1 254.6 8.6 14.2 12.7
254x254x89 88.9 11 260.3 256.3 10.3 17.3 12.7
254x254x107 107.1 9 266.7 258.8 12.8 20.5 12.7
254x254x132 132 8 276.3 261.3 15.3 25.3 12.7
254x254x167 167.1 6 289.1 265.2 19.2 31.7 12.7
305x305x97 96.9 10 307.9 305.3 9.9 15.4 15.2
305x305x118 117.9 8 314.5 307.4 12 18.7 15.2
305x305x137 136.9 7 320.5 309.2 13.8 21.7 15.2
305x305x158 158.1 6 327.1 311.2 15.8 25 15.2
305x305x198 198.1 5 339.9 314.5 19.1 31.4 15.2
305x305x240 240 4 352.5 318.4 23 37.7 15.2
305x305x283 282.9 4 365.3 322.2 26.8 44.1 15.2
356x368x129 129 8 355.6 368.5 10.4 17.5 15.2
356x368x153 152.9 7 362 370.5 12.3 20.7 15.2
356x368x177 177 6 368.2 372.6 14.4 23.8 15.2
356x368x202 201.9 5 374.6 374.7 16.5 27 15.2
356x406x235 235.1 4 381 394.8 18.4 30.2 15.2
356x406x287 287.1 3 393.6 399 22.6 36.5 15.2
356x406x340 339.9 3 406.4 403 26.6 42.9 15.2
356x406x393 393 3 419 407 30.6 49.2 15.2
356x406x467 467 2 436.6 412.2 35.8 58 15.2
356x406x551 551 2 455.6 418.5 42.1 67.5 15.2
356x406x634 633.9 2 474.6 424 47.6 77 15.2
h
b
s
r
t
www.austenknapman.co.uk
11Channel
Size (mm) Kg/mMtr/Ton
Depth h
(mm)
Width b
(mm)
Thickness Web s(mm)
Thickness Flange t
(mm)
Radius Root r(mm)
Depth dBetween
Fillets
100x50x10 10.2 98 100 50 5 8.5 9 65125x65x15 14.8 68 125 65 5.5 9.5 12 82
150x75x18 17.9 56 150 75 5.5 10 12 106
150x90x24 23.9 42 150 90 6.5 12 12 102
180x75x20 20.3 49 180 75 6 10.5 12 135
180x90x26 26.1 38 180 90 6.5 12.5 12 131
200x75x23 23.4 43 200 75 6 12.5 12 151
200x90x30 29.7 34 200 90 7 14 12 148
230x75x26 25.7 39 230 75 6.5 12.5 12 181
230x90x32 32.2 31 230 90 7.5 14 12 178
260x75x28 27.6 36 260 75 7 12 12 212
260x90x35 34.8 29 260 90 8 14 12 208
300x90x41 41.4 24 300 90 9 15.5 12 245
300x100x46 45.5 22 300 100 9 16.5 15 237
380x100x54 54 19 380 100 9.5 17.5 15 315430x100x64 64.4 16 430 100 11 19 15 362
h
b
d s
t
r
Stock lengths subject to availability:6.1mtr, 9.5mtr, 11mtr, 12.2mtr and 14 mtr
Parallel Flange Channel
Size(mm)
Weight(Kg/m)
Mtr/Ton
40x20x5 2.87 348
51x25x5 3.86 259
51x38x5 5.59 179
76x38x6 6.70 149
Rolled Steel Channel
T 01803 664020 F 01803 663128
12 Plates
Thickness(mm)
Size(mm)
WeightKg/m2
3 2000x1000 23.552500x12503000x15004000x2000
4 2000x1000 31.42500x12503000x15004000x2000
5 2000x1000 39.252500x12503000x15004000x20006000x2500
6 2000x1000 47.12500x12503000x15004000x20006000x20006000x25008000x2500
8 2000x1000 62.82500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30007500x3000
10 2000x1000 78.52500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30007500x30009000x3000
12.5 2000x1000 98.122500x12503000x15004000x20006000x2000
Thickness(mm)
Size(mm)
WeightKg/m2
8000x20005000x25006000x25008000x250010000x25006000x30007500x30009000x3000
15 2000x1000 117.752500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30007500x30009000x3000
20 2000x1000 1572500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30007500x30009000x3000
22 2000x1000 172.72500x12504000x20005000x2500
25 2000x1000 196.252500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30007500x3000
www.austenknapman.co.uk
13Plates
- continued
Thickness(mm)
Size(mm)
WeightKg/m2
9000x300030 2000x1000 235.5
2500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30009000x3000
32 2000x1000 251.22500x12504000x20005000x2500
35 2000x1000 274.82500x12503000x15004000x20005000x25006000x25006000x3000
40 2000x1000 3142500x12503000x15004000x20006000x20008000x20005000x25006000x25008000x250010000x25006000x30009000x3000
45 2000x1000 353.32500x12503000x15004000x20005000x25006000x25006000x3000
50 2000x1000 392.52500x12503000x15004000x20006000x20005000x25006000x2500
Thickness(mm)
Size(mm)
WeightKg/m2
9000x300055 2000x1000 431.8
2500x12503000x15004000x20005000x2500
60 2000x1000 4712500x12503000x15004000x20006000x20005000x25006000x25006000x3000
65 2000x1000 510.32500x12503000x15004000x20006000x20005000x25006000x25006000x3000
70 2000x1000 549.52500x12503000x15004000x20006000x20005000x25006000x2500
75 2000x1000 588.82500x12503000x15004000x20006000x20005000x25006000x20005000x25006000x25006000x3000
80 2000x1000 6282500x12504000x20005000x2500
85 2000x1000 667.32500x12504000x20005000x2500
90 2000x1000 706.52500x12504000x2000
T 01803 664020 F 01803 663128
14 Plates
- continued
Thickness(mm)
Size(mm)
WeightKg/m2
5000x250095 2000x1000 745.8
2500x12504000x20005000x2500
100 2000x1000 7852500x12504000x20005000x2500
120 2500x1250 9424000x2000
130 2500x1250 10204000x2000
150 2500x1250 1177.54000x2000
Thickness(mm)
Size(mm)
WeightKg/m2
1.6 2000x1000 12.562500x12503000x1500
2.0 2000x1000 15.72500x12503000x1500
2.5 2000x1000 19.632500x1250
Hot Rolled Sheet
Thickness(mm)
Size(mm)
WeightKg/m2
0.8 2000x1000 6.282500x1250
1.0 2000x1000 7.852500x1250
1.2 2000x1000 9.422500x1250
1.6 2000x1000 12.562500x12503000x1500
2.0 2000x1000 15.72500x12503000x1500
2.5 2000x1000 19.632500x12503000x1500
3.0 2000x1000 23.552500x12503000x1500
Cold Reduced Sheet
www.austenknapman.co.uk
15Plates
- Various Sheets
Thickness(mm)
Size(mm)
WeightKg/m2
0.8 2000x1000 6.282000x12502500x1250
0.9 2000x1000 7.072000x12502500x1250
1 2000x1000 7.852000x12502500x1250
1.2 2000x1000 9.422000x12502500x1250
1.6 2000x1000 12.562000x12502500x1250
2.0 2000x1000 15.72500x1250
3.0 2500x1250 23.55
Galvanised SheetThickness
(mm)Size
(mm)WeightKg/m2
3.0 2000x1000 26.192500x1250
4.5 2000x1000 37.972500x12503000x15004000x17504000x1830
6.0 2000x1000 49.742500x12503000x15004000x17504000x18306000x1830
8.0 2000x1000 65.442500x12503000x15004000x17504000x1830
10.0 2000x1000 81.142500x12503000x15004000x17504000x1830
12.5 2000x1000 100.712500x12503000x15004000x1750
Durbar Sheet
Thickness(mm)
Size(mm)
WeightKg/m2
0.8 2000x1000 6.282500x1250
0.9 2000x1000 7.072500x1250
1.0 2000x1000 7.852500x1250
1.2 2000x1000 9.422500x1250
1.5 2000x1000 11.782500x1250
2.0 2000x1000 15.72500x1250
2.5 2000x1000 19.632500x1250
3.0 2000x1000 23.552500x1250
Zintec Sheet
T 01803 664020 F 01803 663128
16 Cut & Bent Reinforcement & Fabric
A
Length = A
00
R
B
Length = A + (B) - 1/2R - d
Length = A + (C)
B
(C)
A
Length = A + B + (E)
(E)
B
A
BA
B
C
(D)
Length = A + B + + C + (D) - 11/2r - 3d
A31
A
??
B
??
Length = A + B + C + D + (E) - 2r - 4d
??
Length = A + 2B + C + (E)
C
B
B
BB
A (E)
A
B
Length = A
B
Length = A + (B) - 1/2R - d A
A
B
Length = A + 0.57B + (C) - 1.57d
(C)
Semi circular
A
B
(C)Length = A + B + (C) - r - 2d
B
A
(C)
BLength = A + B +(C)
A
(D)
B
Length = 2A + 3B + 17d
B
??
Length = A + B + C + D + (E) - 2r - 4d
?? B
??
A
C
A
A
B
(D) B
Length = 2 (A + B) + 16d
Length = C x 11 x (A - d)C = no. of turns
A
B
11
12 13
15 21
25 26
33
41 44
46 51
67 77
Extracts from BS 8666: 2000 reproduced with the permission of the British Standards Institution under licence 2001/SK0243.Complete Standards are available from BSI Customer Services (Tel +44(0) 20 8996 9001).
SHAPE CODE 99. ALL OTHER SHAPES WHERE A STANDARD OR COMBINATION OF STANDARD SHAPESCANNOT BE USED. A 99 SHAPE CODE SHALL HAVE A MAXIUMUM OF 4 BENDS.
Cut & Bent Reinforcement & Fabric
www.austenknapman.co.uk
17
- continued
B.S. Ref
Mesh Size NominalPitch of Wires
Main Crossmm mm
Size ofWires
Main Crossmm mm
Weightper Sheet
kgs
A393 200 200 10 10 6.16 15 70.96
A252 200 200 8 8 3.95 22 45.50
A193 200 200 7 7 3.02 29 34.79
A142 200 200 6 6 2.22 40 25.57
A142S 200 200 6 6 2.22 63 15.98
B1131 100 200 12 8 10.9 8 125.57
B785 100 200 10 8 8.14 11 93.57
B503 100 200 8 8 5.93 15 68.31
B385 100 200 7 7 4.53 20 52.19
B283 100 200 6 7 3.73 24 42.97
B196 100 200 5 7 3.05 29 35.14
C785 100 400 10 6 6.72 13 77.41
C503 100 400 8 5 4.34 20 50.00
C385 100 400 7 5 3.41 26 39.28
C283 100 400 6 5 2.61 34 30.07
D49 100 100 2.5 2.5 0.77 113 8.87
Sheetsper tonne(approx)
NominalWeightper m2
Standard sheet size 4.8m x 2.4m (A142S 3.6m x 2.0m)
All 6.1m lengths.
Can be cut and bent as per schedule if required.
Diameter (mm) kg/m
6 0.22
8 0.39
10 0.62
12 0.89
16 1.58
20 2.47
25 3.86
32 6.31
40 9.87
Reinforcement Bar, MS and High Yield
Open Steel Flooring
T 01803 664020 F 01803 663128
18
Standard Panels:• 6 metres x 1 metre
• The bearer bars run the length of the panel
• Flooring can also be cut to size andshaped to suit your individual requirements
• Galvanized or self colour
Bar Arrangements: - Product Group 24
Open Mesh Flooring
Sect(mm)
TYPE41/100kg/m
42/50kg/m
31/100kg/m
30/50kg/m
20x3 13.44 15.25 17.70 19.5025x3 16.39 18.19 21.64 23.4430x3 19.34 21.14 25.73 27.5440x3 25.25 27.05 33.61 35.4020x5 21.31 23.11 28.36 30.1625x5 26.22 28.03 35.08 36.8830x5 31.15 32.95 41.63 43.4435x5 36.06 37.87 48.36 50.1640x5 40.98 42.78 55.08 56.8845x5 45.90 47.70 61.64 63.4450x5 50.82 52.62 68.36 70.1655x5 55.74 57.37 75.08 76.8860x5 60.65 62.29 81.63 83.44
BS4592 Part 1 1987SDF Colour Galvanised
Fixings Clips: - GalvanisedFor type W (41mm between bars)For type N (30mm between bars)
Open Steel Flooring
www.austenknapman.co.uk
19
- continued
Diamond Pattern: Bar depths 20mm - 50mm
Supplied in panels made to order with maximum sizes determined by specification.
Expanded Metal Walkway Mesh:Other patterns available in stell, aluminimum and stainless steel.
Can also be supplied sheared to size.
Fixings Clips:
For use with Ref. 4896 - Code No. 020217For use with Ref. 2496 consisting of Hook, Bolt and Clamp.
Plain - Code No. 0201943
Galvanised - Code No. 0202943
Ref No. Type
Nom Size ofAperture
(mm)LW x SW
Nom Size ofStands (mm)W T
Nom Overall
Thickness(mm)
Approx Weight
Uncoated(kg/m2)
Standard(mm)
LW x SW
4896 Plain 79.4x23.8 6.35 4.70 13.50 13.82 2440x1220
2496 Plain 44.5x12.70 6.10 4.70 12.70 17.69 2440x1220
Open Steel Flooring
T 01803 664020 F 01803 663128
20
- continued
Gratings:Elefant® Industrial Gratings
• Material - Galvanised or Plain Steel
• Mesh - 30 x 30mm or 15 x 30mm
Industrial gratings combine great strength with a light structure giving good non-slip properties. Ideal for use on platforms, galleries, gangways, storage floors etc.
Elefant® Industrial Gratings stock items only have an edge bar on two sides parallelto the first dimension shown in the table.
• Can be delivered in self colour
The grating can be manufactured to the customers applications.
Fixings Clips:
Bearing Bars(mm)
Mesh Panel(mm)
Mesh Size
30 x 30Item No.
15 x 30Item No.
25 x 2 400 x 1000 9504G -
500 x 500 9505G -
500 x 1000 9510G 8510G
500 x 1500 9515G 8515G
600 x 500 9605G -
•600 x 1000 9610G 8610G
•600 x 1500 9615G 8615G
700 x 500 9705G -
700 x 1000 9710G 9710G
700 x 1500 9715G 8715G
800 x 500 9805G -
•800 x 1000 9810G 8810G
•800 x 1500 9815G 8815G
900 x 500 9905G -
900 x 1000 9910G 8910G
900 x 1500 9915G 8915G
1000 x 500 9105G -
•1000 x 1000 9110G 8110G
•1000 x 1500 9115G 8115G
30 x 2 700 x 750 2707G -
700 x 1000 2170G -
700 x 1250 2712G -
Flooring
www.austenknapman.co.uk
21
- Rhino Anti-Slip Flooring
2mm Thick Pre-Galvanised in lengths of approx 4 metres x 50mm deep.
Floor Straps for End Fixing:180mm - Code 240400 240mm - Code 240401300mm - Code 240402 360mm - Code 240403
Holes ø 5mm burst embossed upwardsNon slip surfaceSetting in inclined side% Open area: 2.0Joining clips available
Width Code No.240mm 240360300mm 240361
Rhinopic
Holes ø 5mm burst embossed upwardsHoles ø 16mm embossed downwardsNon slip surface. Draining surface% Open area: 21.0Joining clips available
Width Code No.180mm 240335240mm 240336300mm 240337360mm 240338
Rhinomixte
Diamond points embossed in a diagonal lineUniversal use for all requirementsJoining clips available
Width Code No.180mm 240355240mm 240356300mm 240357360mm 240358
Rhinodiam
Holes ø 16mm burst embossed downwardsRecommended for warehouse and shelving% Open area: 19.0Joining clips available
Width Code No.240mm 240345300mm 240346360mm 240347
Rhinodown
Split and embossed surface with serrated finishVery strong and non slipRecommended for high risk slippery areas% Open area: 47.0Joining clips available
Width Code No.180mm 240340240mm 240341300mm 240342360mm 240343
Rhinoplus
Flooring
T 01803 664020 F 01803 663128
22
- continued
Stainless Steel Firmgrip Planks: - Type 95 in 2mm Thick
Aluminium Firmgrip Planks:Type 1409 in 3mm Thick
Durbar Pattern Steel Floor Plates:
Aluminium Alloy Treadplate: - Five Bar PatternGrade 5754 H114 Tread Height 1.5mm
Durbar Nosing: - 300 Thick Pyramid Anti-Slip Nosing:25 x 25 x 1000mm long 35 x 5 x 6000mm LongCode: 25NOSE Code: 25NOSE1
35 x 5 x 3000mm LongCode: 25NOSE2
Width x Depth(mm)
Length(mm)
Code No.
150 x 32 3000 429531532SS200 x 45 3000 429532045SS225 x 45 3000 429532245SS250 x 45 3000 429532545SS275 x 45 3000 429532745SS
Width x Depth(mm)
Length(mm)
Code No.
100 x 45 6000 4214601045AL150 x 45 6000 4214601545AL200 x 45 6000 4214565045AL
Length xWidth (mm)
Thickness(mm)
Code No.
2000 x 1000 3.0 35052132500 x 1250 2.0 350584522500 x 1250 3.0 350584532500 x 1250 4.5 35058445
Thicknesson Plain
(mm)
2000x
1000
2500x
1250
3000x
1500
Kilosperm2
3 ■6313 ■84113 26.204.5 ■63145 ■84145 ■31145 37.976 ■6316 ■8416 ■3116 49.748 ■6318 ■8418 ■3118 65.4410 ■63110 ■84110 ■31110 81.1412.5 ■63112 ■84112 ■31112 100.77
Stairtreads
www.austenknapman.co.uk
23
Durbar: - Self Colour
Stock Size(mm)
SPECIALS MADE TO ORDER
Type(mm)
1000x300x4.5O/P 50 turn up/down
Open Steel: - Galvanised or Self Colour 41/100mm
Size(mm)
Bar Dimen.(mm)
SelfColour
Galvanised
SPECIALS MADE TO ORDER
1000x283 25x5 441110283 4412102831000x242 25x5 441110242 441210242800x283 25x5 441108283 441208283800x242 25x5 441108242 441208242
LCC Cast Iron Stair Treads: - Standard Sizes
Standard Sizes LENGTH x Width (mm)
533 x 102 • 610 x 102, 127, 152, 178, 203, 229, 254, 305
686 x 152, 178, 203, 229, 254 • 762 x 152, 178, 191, 203,
229, 254, 279 • 800 x 254, 280 • 838 x 178, 229, 254, 267
900 x 254, 280 • 914 x 159, 178, 203, 229, 241, 254, 279,
311 • 991 x 178, 229, 279 • 1000 x 254, 280, 305
1067 x 178, 203, 229, 254, 279, 305 • 1219 x 203, 229,
254, 279, 305 • 1372 x 305 • 1524 x 254
Expanded Metal: - Galvanised or Self Colour
Supagrip Mesh also available.
We can also supply LCC type Cast IronLanding Plates.
Product Group 371
MeshPattern
Size(mm)
SelfColour
Galvanised
SPECIALS MADE TO ORDER
Ref 1292 1000x230 44201121023 44202121023Ref 2496 1000x230 44201241023 44202241023
Open Steel ‘Cut Your Own’: - Self Colour 41/100mm 25 x 5mm
1000mm x 283mmFixing Plate welded one endCut to Length required and weld on plateCode No. 441100
Stairtreads
T 01803 664020 F 01803 663128
24
- continued
Elefant® Stair Treads Grating Step: - Galvanised Steel
Edge Bars Size (mm) Code No.
50 x 3 150 x 500 7155G50 x 3 150 x 600 7156G50 x 3 250 x 700 7257G50 x 3 250 x 800 7258G50 x 3 250 x 900 7259G50 x 3 250 x 1000 7251G60 x 3 300 x 1000 7301G60 x 3 300 x 1200 7302G
70 x 3.5 300 x 1500 7305G
D H c d
150 45/- 35 78200 45/57 45 102225 45/57 45 127250 45/57 50 142275 45/57 62 143300 45/57 50 192
Mesh: 20 x 30mm
With grating pattern tomatch our standard gratingsizes and with superbnon-slip properties.
Elefant® Stair Treads Firm Grip: - 2mm Galvanised Steel
Length(mm)
Depth(mm) 150
Width (mm)200 225 250 275 300
600 45 1506G 2006G 2206G 2506G 2706G 3006G700 45 1507G 2007G 2207G 2507G 2707G 3007G800 45 1508G 2008G 2208G 2508G 2708G 3008G900 45 1509G 2009G 2209G 2509G 2709G 3009G1000 45 1510G 2010G 2210G 2510G 2710G 3010G1100 57 - 2011G 2211G 2511G 2711G 3011G1200 57 - 2012G 2212G 2512G 2712G 3012G1500 57 - - - 2515G 2715G 3015G
A flat step with 9mm punched raised holes to ensure non-slipproperties, and a 5mm countersunk hole to drain off water and oil.
The stair treads have a specially designed front edge to provideexcellent strength. On 300mm width an additional hole ø 13mm, c/c48mm from G, tp provide an extra fixing point. These treads aredesigned according to British Standard BS45925 Part 3 1987.
Stairtreads
www.austenknapman.co.uk
25
- continued
Elefant® Stair Treads: - 3mm Galvanised Steel
Edge Bars Code No.
150 x 500 8155G150 x 600 8156G220 x 500 8225G220 x 600 8226G220 x 700 8227G220 x 800 8228G220 x 900 8229G220 x 1000 8221G
A flat step with 9mm punchedrectangular holes of 10 x 26mmoffer excellent non-slip properties.
T 01803 664020 F 01803 663128
26 Welded Mesh
Specification(mesh x wire dia)
4’x8’
Sheet Size
6’x12’ 6’x4’ 6’x3’ 7’x12’ 84”
Roll Height
72” 48”
3”x3”x6g 11.07 24.54 8.35 6.32 28.54 141.6 121.7 82
3”x6”x6g 8.43 18.59 6.36 4.83 21.6 106.9 92 62.1
1”x1”x8g 22.7 50.9 17.08 12.86 59.33 295.8 253.8 169.8
2”x1”x8g 17.13 38.29 12.87 9.71 44.63 222.4 190.8 127.8
2”x2”x8g 11.54 25.69 8.68 6.56 29.94 148.9 127.9 85.8
3”x1/2”x8g 26.47 59.3 19.88 14.96 69.12 344.8 295.8 197.8
3”x3”x8g 7.81 17.32 5.88 4.46 20.15 99.9 85.9 57.8
1”x1”x10g 13.98 31.29 10.5 7.91 36.49 182 156.1 104.4
11/2”x11/2”x10g 9.4 20.98 7.06 5.33 24.44 121.7 104.5 70
2”x1”x10g 10.54 23.55 7.92 5.97 27.44 136.8 117.4 78.6
2”x2”x10g 7.1 15.8 5.35 4.03 18.4 91.6 78.7 52.8
3”x1/2”x10g 16.28 36.47 12.23 9.2 42.52 212.1 181.9 121.7
3”x1”x10g 9.39 20.97 7.06 5.33 24.45 121.7 104.5 70
3”x3”x10g 4.81 10.65 3.62 2.74 12.38 61.5 52.8 35.6
4”x4”x10g 3.65 8.07 2.76 2.1 9.38 46.4 39.9 27
1”x1”x12g 8.73 19.53 6.56 4.93 22.7 113.5 97.3 65.1
11/2”x11/2”x12g 5.86 13.08 4.41 3.32 15.24 75.9 65.1 43.7
2”x1”x12g 6.58 14.7 4.94 3.72 17.12 85.3 73.2 49
2”x2”x12g 4.43 9.86 3.33 2.52 11.49 57.1 49 32.9
3”x1/2”x12g 10.16 22.76 7.63 5.74 26.51 132.1 113.4 75.9
3”x1”x12g 5.86 13.09 4.41 3.32 15.24 75.6 65.1 43.7
75mmx25mm
x6g/10g 13.6 30.2 10.2 7.08 35.2 162.4 139.5 93.9
Welded meshes are available either self-colour or galvanised.Weights quoted are for self colour and are approximate.
Stainless steel weld mesh is ideal for a multitude of applications throughout industryincluding construction, food and medicine.
Manufactured from Type 304 stainless, it is suitable for all types of fabrication.
Specification(mesh x wire dia)
Panel Size
2”x2”x10g 96”x4’2”x2”x12g 96”x4’1”x1”x10g 96”x4’1”x1”x12g 96”x4’1/2x1/2”x16g 36”x50’1/2”x1/2”x16g 40”x50’1”x1”x16g 36”x50’1”x1”x16g 48”x50’
Stainless Steel Welded Mesh
Sundry Items
www.austenknapman.co.uk
27
Welding Equipment:
• ARC/ Spares/Wire.
• MIG/Spares/Rods
• TIG/Spares/Tungstens etc
• PLASMA/Spares
• OXY/Acetylene/spares/Flux’s
• Machines and accessories- Demonstrations available for all machines/models.
• Main Agents for Butters, AMT, Cebora and S.I.P.
• BOC Gas Agents
• Oxygen/Acetylene/Propane/Argoshield/ Refrigerent gases/Balloon Gas
Engineering Tools: Power Tools & Air Tools
• Drill bits • Hitachi & Accessories
• Tap and dies • Ryobi & Accessories
• Tape measure • DeWalt & Accessories
• Wire brushes • AEG
Safety Equipment:• Harnesses/Goggles/Shields/Gloves etc
Nuts, bolts & washers:• Metric/Hexagon/ CSK/Carriage
• Studding- zinc plated
• Structural- 8.8
Hand tools:• Main Agent for Stanley, Bahco, Irwin, Faithful and Wera.
• Various tools from stock and to order.
Paints:• Brushes/Rollers/Red and grey oxide/thinners/gloss paint/galvanising paints.
Galvanizing Service:• Collection
• Delivery