General Information

11

description

General Information. Wireless, Web-Based Monitoring System Alarm/Event Notifications by Text Message and or E-Mail VPN Connection for Fast Response to Alarms and Events Heartbeat Update Every 15 Minutes System Design Based on 30 + Years of Power Generation Experience - PowerPoint PPT Presentation

Transcript of General Information

Page 1: General Information
Page 2: General Information

Wireless, Web-Based Monitoring System Alarm/Event Notifications by Text

Message and or E-Mail VPN Connection for Fast Response to

Alarms and Events Heartbeat Update Every 15 Minutes System Design Based on 30 + Years of

Power Generation Experience System Training and Support

Page 3: General Information

14 Digital (Dry Contact) Inputs 2 Analog, 0 to 5 VDC or 4 to 20ma Inputs 4 Controllable Outputs DC Powered with Surge Protection Status LED’s Test and Disable Maintenance Feature Removable Terminal Connectors Magnet Mount For Easy Installation Small, Rugged, Compact Design (4” x 3.5”)

Page 4: General Information

Small, Rugged, Reliable Hardware Easy Installation, Wiring and Setup Can Monitor Anything No Dedicated Computers or Software

Required Remote Control for Starting/Stopping

Generators/Pumps, etc.. From Web Portal User Friendly Customer Interface Web Portal Maintenance / Repair Logs on Portal Printable Data Logs Maintained on Portal

Page 5: General Information

Continuous 24/7 Monitoring /Diagnostics Instant Notification of Events /Alarms Status Updates Every 15 Minutes Equipment /Site Status From Anywhere User Name/Password Protected Web Portal Portal Feature Updates At No Additional

Cost Hardware Updates Over The Air Reduces Site Visits, Increases Reliability Daily Site Status Reports

Page 6: General Information

Overview Tab – List All Alarming Sites Details Tab – Full Detailed Status Report Mapping Tab – Site Locations / Current Status Graphs Tab – Analog Signal Graphs History Tab – All Events / Alarms, Date and

Time Stamped Reports Tab – Allows For Custom Reports Control Tab – Remote Start / Stop Capability Maintenance Tab – Maint./Repair Logs Setup page – Name Alarms, Events, Recipients

Page 7: General Information

Utility Power Failure Generator Running ATS In Emergency Position Pre – High Engine Temperature Pre – Low Oil Pressure Low Engine Temperature Low Fuel Level Low Battery Voltage High Battery Voltage

Page 8: General Information

Generator Running Common Alarm Low Fuel Level Alarm Low Battery Voltage Alarm Low Engine Temperature Generator Location with GPS Tracking Geo-Fencing Violation Alarms

Page 9: General Information

Power Failure Alarm High Wet Well Level Alarm Low Wet Well Level Alarm Data Log Pump Run Times, Duration Wet Well Levels in Feet and Inches Pump Failure Alarms Status Updates Every 15 Minutes

Page 10: General Information

Power Failure Pump Failure Water System Pressure in PSI Water System Flow in GPM/GPH Tank/Lake Levels in Feet/Inches High Level Alarms Low Level Alarms Status Updates Every 15 Minutes

Page 11: General Information

Brochures Power Point Presentations Web Demo’s Installation Support / Technician Training Wiring Diagrams Setup, Commissioning Assistance Troubleshooting Assistance Customer References