General Guidelines for SPOP
description
Transcript of General Guidelines for SPOP
1
General Guidelines for SPOP• SPOP is ordered and implemented on a per switch, per LATA basis
– Overflow is not permitted/allowed among/between different switches• SPOP conversions must follow CenturyLink project guidelines• Service Managers must obtain appropriate LATA Maps from the Wholesale SPOP website
and email diagrams to customer to complete• Service Managers will control and validate LATA Maps (diagrams) to be used in conjunction
with the Customer SPOP Checklist in the kick off (pre-provisioning meeting)• Completion of the SPOP Checklist and LATA Maps are required as part of the Joint Planning
Process• Customer is responsible for sharing LATA Maps, Customer SPOP Checklist and all
documentation related to SPOP with people within their own company associated with SPOP implementation (e.g., Network, Order Writing, Provisioning, etc.,)
• For WSPs, the Service Manager will assist the customer for localities where 2 way trunking is not available due to cell pack feature unavailability.
• SLRN may be in affect on your local trunk groups - Conversion to SPOP may result in traffic pattern changes
• You may not need a trunk group to the local tandem:If you are only serving customers in this Local Tandem Area using a LRN that is outside of the Local Calling Area and;You do not have a full NPA-NXX and;You exchange less than one DS1 or less than 512 BHCCS worth of traffic to the local tandem and you are not using ARLRN but normal (default) routing
• You may still want a trunk group to the local tandem for your originating traffic to CenturyLink and other A-Record Holder Providers in the Local Calling Area
DES MOINES IA LATA 632
Rev. 02/17/2012
2
NPA-NXXs
LERG SWITCH CLLI
ACTUAL SWITCH CLLI & POINT CODE
POI / ACTL CLLI
DESMIADT18T ACCESS TANDEM
Subtending Localities
* Locality covered by local tandem – submit diagram for local tandem, also.
DES MOINES IA LATA 632
REV. 9/16/2010
*ADEL JEWELL
*ALTOONA MARSHALLTOWN
*AMES *NORWALK
*ANKENY OSKALOOSA
BLAIRSBURG *PERRY
BOONE OTTUMWA
*CARLISLE *POLK CITY
CLARION *PRAIRIE CITY
*COLFAX RENWICK
*DALLAS CENTER ROSE HILL
*DAWSON *RUNNELLS
*DES MOINES *STUART
EAGLE GROVE *VAN METER
*EARLHAM *WAUKEE
*GRANGER WEBSTER CITY
*GRIMES WILLIAMS
*INDIANOLA *WINTERSET
IOWA FALLS
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
CUSTOMER NAME and ACNA
3
INSTRUCTIONS
• Use previous slide as a template. Copy all and paste to new document• In top left box enter full NPA-NXXs* assigned to the switch and in LATA 632 (on ASR, full NPA-
NXXs should go in CNPANXX fields on Translations Questionnaire). • In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service
Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.
• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.
• EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter 2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks requested.
• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
DES MOINES IA LATA 632
Rev. 02/17/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
4
NPA-NXXs
LERG SWITCH CLLI
ACTUAL SWITCH CLLI & POINT CODE
POI / ACTL CLLI
MSCYIATC27T ACCESS TANDEM
Subtending Localities
* Locality covered by local tandem – submit diagram for local tandem, also.
DES MOINES IA LATA 632
REV. 2/28/08
ALGONA CHARLES CITY
GILMORE CITY GARNER
HUMBOLDT HAMPTON
LUVERNE GENEVA
WHITTEMORE LIVERMORE
WESLEY *MANLY
*MASON CITY NASHUA
ASHLEY NORTHWOOD
BRITT OSAGE
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
CUSTOMER NAME and ACNA
5
INSTRUCTIONS
• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in LATA 632 (on ASR, full NPA-
NXXs should go in CNPANXX fields on Translations Questionnaire). • In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request
Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.
• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.
• EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter 2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks requested.
• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
DES MOINES IA LATA 632
Rev. 02/17/2012
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
6
NPA-NXXs
LERG SWITCH CLLI
ACTUAL SWITCH CLLI & POINT CODE
POI / ACTL CLLI
DESMIADT28T
LOCAL TANDEM
Subtending Localities
DES MOINES IA LATA 632
REV. 2/28/08
ADEL INDIANOLA
ALTOONA NORWALK
ANKENY PERRY
CARLISLE POLK CITY
COLFAX PRAIRIE CITY
DALLAS CENTER RUNNELLS
DAWSON STUART
DES MOINES VAN METER
EARLHAM WAUKEE
GRANGER WINTERSET
GRIMES
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
CUSTOMER NAME and ACNA
7
INSTRUCTIONS
• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the DES MOINES LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www. centurylink.com/wholesale/clecs/slrn.html
• In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.
• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.
• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.
• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
DES MOINES IA LATA 632
Rev. 02/17/2012
WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
8
NPA-NXXs
LERG SWITCH CLLI
ACTUAL SWITCH CLLI & POINT CODE
POI / ACTL CLLI
MSCYIATC02T
LOCAL TANDEM
Subtending Localities
DES MOINES IA LATA 632
REV. 2/28/08
MASON CITY
MANLY
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
CUSTOMER NAME and ACNA
9
INSTRUCTIONS
• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the MASON CITY LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www. centurylink.com/wholesale/clecs/slrn.html
• In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.
• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.
• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.
• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
DES MOINES IA LATA 632
Rev. 02/17/2012
WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
10
NPA-NXXs
LERG SWITCH CLLI
ACTUAL SWITCH CLLI & POINT CODE
POI / ACTL CLLI
Subtending Localities
DES MOINES IA LATA 632
REV. 9/16/2010
Ames
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.
CUSTOMER NAME and ACNA
AMESIATC01TLocal TandemLED 6/25/2010
LED – LERG Effective Date
11
INSTRUCTIONS
• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the AMES, IA LOCAL
CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www.centurylink.com/wholesale/clecs/slrn.html
• In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.
• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.
• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.
• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.
* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
DES MOINES IA LATA 632
Rev. 02/17/2012
WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.