Ge

ne

ral C

ata

log

ue

Energy efficiency

The Gearless Lifts are highly efficient with an Energy Recovery System reusing it in the same installation, as well as the disconnection of the elements in Stand-by.

Portfolio

Private house Hydraulic 450 kg

Clinic Symbio 1.000 kg

Residential Building Hydraulic 320 kg

Refurbished building Optimus 320 kg

Office Building Panoramic 450 kg

Private house EcoLift 400 kg

www.elevators.ie

Private house EcoLift 380 kg

Cellar Freight lift 6.000 kg

Shopping Centre Symbio 2.000 kg

Supermarket Hydraulic 1500 kg

Refurbished building Optimus 630 kg

Shop Hydraulic 630 kg

7

www.elevators.ie

Carlos Silva S.A.

Our suppliers

Operating Panels and Push buttons

Control Panel

Doors

Gearless Machines Hydraulic kit

Guide

Structures Car frame/ Car

9

The machine room-less electric lift the best optimizes availa-ble shaft.

• Advantages:

Flexibility: allows single, double and triple entrances. Ideal for projects with adjacent entrances.

Single-phase: possibility of operating on a single-phase supply.

Optimisation: easily assembled steel work. Self-supporting.

Adaptability: possibility of installing it with limited pit depth and headroom clearance due to the certificates which enable us to further reduce these measures.

With Optimus, the required space is no longer the critical detail that needs to be considered first when deciding whether to install an electric or hydraulic lift in an existing buil-ding. This electric lift uses the existing shaft equally efficiently as a hydraulic lift.

When an old building is being refurbished for new usage, many times the old lift is being replaced as well. While doing so, the goal is to make optimal use of the shaft and to create the lar-gest possible car size. Where up until today a hydraulic lift had to be installed, the Optimus now is providing a real alternative.

The electric lift, which is available with or without machine room and comes with gearless propulsion, can also be used with a singlephase current and merely requires 250mm space on the side of the rucksack frame. Further space-optimization is guaranteed by mounting guidance and counterweight rails in the same layer.

10

Optimus gearless

www.elevators.ie

• Technical characteristics:

Nominal speed 1 m/s > CONSULT

Nominal load up to 2.500 kg

Cable 6,5 Ø and for > 1.000 kg - 8 Ø

Suspension 1:1 up to 320 kg 2:1 (450 kg-2.500 kg)

Standard headroom 3.600 mm.

Standard pit 1.200 mm.

Travel up to 100 m.

Control unit Installed in door frame*

*Automatic doors 120 mm.

• SymbioTo make better use of the shaft

• Optimus

SW = 1550 mm

CD

= 1

26

0 m

m

SD

= 1

57

0 m

m

CW = 1030 mm

CO = 700 mm

450 kg6 pers

• Machineroomless(MRL)

CD

= 1

26

0 m

m

SD

= 1

57

0 m

m

SW = 1400 mmCW = 1030 mm

CO = 800 mm

450 kg6 pers

Q (kg)

Low Pit comPensatory measures

Low head comPensatory measures

Low Pit (mm)Required headroom

(mm) Required pit depth (mm)

Low Head (mm)

180-450 200 3265 540 3170

630 540 3185 540 3170

1000 850 2800 850 2800

1250 850 2800 850 2800

Q (kg)

Low Pit en81-21 Low head en81-21

Low Pit (mm)Required headroom

(mm) Required pit depth (mm)

Low Head (mm)

180-450 465 3265 465 3170

630 590 3230 590 3170

1000 850 3170 850 3170

1250 850 3170 850 3170

• Technicaldimension

• Doubleentrance90º1000kg

• Doubleentrance90ºspecial

SD

= 1

29

0 m

m

CD

= 8

60

mm

SW= 1200 mm

CW= 1090 mm

CO = 700 mm

320 kg4 pers

SW = 2100 mm

CO = 900 mmC

O =

90

0 m

m

SD

= 1

86

0 m

m

CD

= 1

50

0 m

m

CW = 1400mm

SD

= 1

03

0 m

m

SW = 815 mm

CW = 620 mm

CO = 500 mm

CD

= 1

50

0 m

m

• Single-phase plug 220V

Q (Kg)Rated speed

recommended (m/s)Travel máx. (m)

320 1:1 up to 0,5 30

320 2:1 up to 0,6 30

450 up to 0,5 30

630 up to 0,3 30

12

www.elevators.ie

20

0 m

m

120

0 m

m

Drawing of landing

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENINGCO

SW

CD

CW

SD

Q (kg) SW SD CW CD CO

100 800 930 680 500 600

180 800 1150 680 720 600

225 1250 1000 850 790 700

320 1280 1250 900 1000 700

450 1400 1450 1020 1210 800

630 1500 1650 1120 1410 800

800 1810 1750 1300 1500 900

1000 1600 2370 1100 2100 900

1275 1800 2600 1200 2300 1100

• Floordrawingwithareducedheadroom

oflessthan3150mm

SW + 65 mm

(2) For headroom inferior at 3150 mm, increase SW of 65 mm

With OPTIMUS at dimen-

sion 0, thanks to the mi-

nimum pit of 200 mm for

450 kg lifts, we can avoid

ramps.

• WithMachineRoom(WMR)

• Dimension“0”withgearless

13

365 mm

Symbio gearlessWe have equipped it with a gearless machine to guarantee su-preme energy efficiency. The optimisation of the MRL Symbio design has enhanced the lift’s comfort and safety.

• Advantages

Space optimisation: no machine room required.

Environmentally-friendly: lower power consumption with a gearless machine. Plus, it needs no oil and does not create unnecessary noise.

Single-phase: possibility of connection to a singlephase plug.

Easy maintenance: the machine has a long life cycle and repairs are virtually unnecessary.

Comfort: it features a portico car frame with 2:1 suspension that guarantees a top quality ride during the trip.

• Single-phase plug 220V.

Q (Kg)Rated speed

recommended (m/s)Travel máx. (m)

320 up to 0,8 30

450 up to 0,6 30

630 up to 0,3 30

14

www.elevators.ie

• Technicalcharacteristics:

Nominal speed 1 m/s 3VF up to 1,6 m/s

Nominal load up to 2.500 kg

Cable 6,5 / 8 mm. (> 1.250 kg)

Suspension 2:1

Standard headroom 3.700 mm.

Standard pit 1.200 mm.

Travel up to 100 m.

Control unit Installed in door frame*

*Automatic doors 120 mm.

• Withoutmachineroom(WMR)

Q (kg)

Low Pit comPensatory measures

Low head comPensatory measures

Low Pit (mm)

Required headroom (mm)

Required pit depth (mm)

Low Head (mm)

180-450 265 3285 590 2500

630 265 3285 645 2600

1000 650 3210 645 2600

1250 650 3330 650 3330

1600 650 3330 650 3330

2000 1020 3700 1020 3700

2500 1020 3700 1020 3700

Q (kg)

Low Pit en81-21 Low head en81-21

Low Pit (mm)

Required headroom (mm)

Required pit depth (mm)

Low Head (mm)

180-450 430 3285 640 2500

630 430 3285 695 2600

1000 700 3210 700 3210

1250 700 3330 700 3330

1600 700 3330 700 3330

2000 1020 3700 1020 3700

2500 1020 3700 1020 3700

AlsoavailablewithMACHINEROOM.

Q (kg) SW SD CW CD CO

180 1310 960 750 750 700

225 1310 1100 750 870 700

320 1400 1300 900 1000 700

450 1500 1460 1020 1210 800

630 1600 1660 1120 1410 800

800 1930 1750 1300 1500 900

1000 1730 2350 1100 2100 900

1125 2000 2350 1250 2100 1000

1250 2050 2350 1300 2100 1000

1600 2250 2500 1500 2250 1200

2000 2150 3050 1500 2700 1300

2500 2550 3050 1800 2700 1600

Drawing of landing

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENING

CO

SW

CD

SD

CW

630 kg8 pers

SW = 1650 mm

CW = 1130 mm

SD

= 1

73

0 m

m

CD

= 1

410

mm

CO= 900 mm

• MinimumstandardShaft

• MinimumHeadroom(2400mm)

SW= 2200 mm

SW= 1560 mm

CW= 1500 mm

CW= 1020 mm

CO= 800 mm

CD

= 5

45

mm

CD

= 1

210

mm

SD

= 6

85

mm

SD

= 1

46

0 m

m

CO= 800 mm

2500 kg33 pers

SW= 2570 mm

CW= 1900 mm

CO= 1600 mm

CD

= 2

60

0 m

m

SD

= 2

90

0 m

m

16

www.elevators.ie

with machine roomTraction Lift 2V 3VF

Drawing of landing

CO

SW

CD

SD CW

• Technicalcharacteristics:

Nominal speed up to 2 m/s

Nominal load up to 3000 kg

Standard headroom 3.700 mm.

Standard pit 1.200 mm.

Travel up to 100 m.

(1) Door opening 0 mm.(2) Lateral car frame.

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENING

Q (kg)Nominal Output

(kw)Min. Headroom.

(mm)Min. Pit. (mm)

180 1.5 - 2.2 2500 250

225 1.8 – 2.2 2500 250

320 2.6 – 3.2 2500 250

450 3.4 – 4.4 2500 250

630 4.8 – 6.3 2600 300

800 6.6 – 7.3 2600 300

1000 8.1 – 8.8 2600 400

1125 11.4 - 15.8 2600 400

1250 12.9 – 17.3 2600 400

1600 14.3 – 17.3 2600 400

1800 13.9 – 15.4 3550 1250

2000 15.3 – 16.5 3550 1250

2500 18.3 – 19.45 3550 1250

3000 22.25 – 23.9 3800 1500

Q (kg) SW SD CW CD CO

180 1100 1170 750 750 700 (1)

225 1100 1290 750 870 700 (1)

320 1350 1350 1000 900 700

450 1500 1650 1020 1210 800

630 1600 1850 1120 1410 800

800 1700 1950 1300 1500 900

1000 1800 2350 1100 2100 900 (2)

1125 1950 2350 1250 2100 1000 (2)

1250 2000 2350 1300 2100 1000 (2)

1600 2200 2500 1500 2250 1200 (2)

1800 2200 2800 1500 2500 1200

2000 2300 3000 1500 2600 1200

2500 2600 3100 1800 2700 1400

3000 3100 3300 1850 3000 1400

We have developed an entire management and pro-duction system that makes it possible to adapt our proven de-signs to different lift shafts in existing buildings.

Hydraulic Lift

• Advantages

Custom-designed to meet your needs: We tailor each lift to suit each different shaft.

Standard dispensations: In order to be able to adapt each lift to suit existing buildings shaft, we offer solutions for shallow pits and restricted headrooms.

Cabinets: Possibility of supplying.

Consumption: energy efficient, as it reduces consumption by up to 50% in comparison with conventional hydraulic lifts.

Comfort: excellent comfort level, equal to the electric VVVF lift.

Adaptability: easy control and maintenance.

Safety: automatic emergency system with a pressure relief valve, always active during the descent even in case of motor failure. Rupture valve is included.

Environmentally-friendly: eco-fluids with better environ-mentally friendly properties can be used.

Installation of the tank within the pit: We have configured a hydraulic machine room-less lift with superb features. The main difference to competitors is that we have added a control system with electronic valves. It is the perfect solution for buildings with 4-5 storeys.

18

www.elevators.ie

• Eachcertificate,oneguarantee

Nominal Speed 0,63 m/s up to 1 m/s

Nominal load with/withoutmachineroom up to 1600 kg

Average traffic between 30 and 45 starts / hour

Standard headroom 3.500 mm.

Standard pit 1.200 mm.

Travel up to 25 m.

• Technical characteristics:

Outside car height 2100mm

Exception for reduced pit Exception for reduced headroom

EN A3 normative performance

Remittal of EN81.21

Q (kg)

Low Pit comPensatory measures

Low head comPensatory measures

Low Pit (mm)

Required headroom (mm)

Required pit depth (mm)

Low Head (mm)

100 200 2450 200 2450

225 200 2450 200 2450

450 200 2450 200 2450

630 200 2450 200 2450

800 300 2450 300 2450

1000 300 2450 300 2450

Q (kg)

Low Pit en81-21 Low head en81-21

Low Pit (mm)

Required headroom(mm)

Required pit depth (mm)

Low Head (mm)

100 300 2450 200 2450

225 300 2450 200 2450

450 300 2450 200 2450

630 300 2450 200 2450

800 400 2450 300 2450

1000 400 2450 300 2450

• Minimalwidth

• Tripleentrance

Flat folding BUS door

SD

= 1

55

0 m

m

SD

= 2

135

mm

CD

= 1

100

mm

CD

= 1

415

mm

CO = 500 mm

CO = 900 mm

CO

= 9

00

mm

CO

=9

00

mm

CW= 550 mm

CW= 1415 mm

SW= 650 mm

SW= 1935 mm

100kg1pers

• Cabinets

Width

Depth

He

igh

t

Checkcompatibilityofcabinetwithtank.

Type Width (mm) Depth (mm) Height (mm)

AH-TYPE 1 785 364 2052

AH-TYPE 2 960 510 2.162

E650 1.000 650 2.200

Q (kg) SW SD CW CD CO

100 700 1210 580 500 500

180 750 1210 800 630 550

225 1000 1250 850 800 700

320 1300 1380 1000 900 700

450 1400 1450 1020 1210 800

630 1550 1650 1120 1410 800

800 1750 1750 1300 1500 900

1125 1750 2400 1250 2100 1000

1250 1800 2350 1300 2100 1000

1350 1850 2450 1350 2200 1000

1500 2050 2450 1500 2200 1200

1600 2050 2500 1500 2250 1200

• Withmachineroom

Drawing of landing

SW

CD

SD

CO

CW

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENING

20

www.elevators.ie

With Slim door, the sill can be reduced from 70 to 60 mm

• Specialshaft

• Irregularshaft

• Buriedpiston

SW = 1705 mm

CW = 1030 mm

CD

= 8

10 m

m

SD

= 14

50

mm

320 kg4 pers

SW = 2175 mm

SD

= 1

04

5 m

m

CW = 1140 mm

CO = 700 mm

300 kg4 pers

CO = 900 mm

SD

= 2

35

0 m

mSD

= 2

25

0 m

m

CD

= 1

88

0 m

m

SW = 2200 mm

CO = 900 mm

CW = 1130 mm

• Circular

Other solutions

21

CD

= 7

70

mm

60 6030

ParkingLiftA car lift featuring the best brands and engineering.

• Advantages

Safety: in the event of an electrical failure, the lift descends to

the next floor enabling the vehicle to exit.

Flexibility: possibility of integrating any type of control panel.

Easy installation: the design aims to reduce the time taken

to install the lift.

Stability: it features bracing to the car and frame, providing

the structure with more rigidity and stability.

Parking assistance system: easy vehicle positioning (op-

tional). At the upper part of the door, the displays show if the

car is positioned correctly.

Drainageofsnowwater: the snow located at the car whe-

els is removed, avoiding the rust of the car platform

• Technical characteristics:

Nominal speed Up to 0,5 m/s

Nominal load Up to 5.500 kg

Car opening between 2200 and 2500 mm.

Suspension 1:1 - 2:1

Travel Up to 20 m.

Standard headroom 3.600 mm.

Standard pit 1.200 mm.

Pistonsdirectdraw Up to 3,5 m.

Telescopic guide chain pistons

1:1 from 3,6 to 10 m.

Q (kg) Speed (m/s) Output (HP)Min. Headroom.

(mm)Min. Pit. (mm)

3000 0,1 - 0,5 10,5 - 40 2900 900

3500 0,1 - 0,5 10,5 - 50 2900 900

4000 0,1 - 0,5 13 - 60 2900 900

5000 0,1 - 0,4 15 - 60 2800 900

5500 0,1 - 0,4 20 - 70 2900 1000

26

www.elevators.ie

• Forexistingbuildings:

Q (kg) SW SD CW CD CO

3000* 3250 5090 2300 4600 2200

3500 3450 5400 2500 5000 2200

4000 3550 5900 2600 5500 2200

5000 3950 6400 2850 6000 2500

5500 4000 7500 3150 6750 2500

We possess all necessary certificates for our Par-

kingLift that makes it possible for us to optimise

the whole lift system for the required load.

Drawing of landing

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENING

SD

CD

SW

CW

CO

Standard exception for an area greater than

intable1.1in

standardEN

81.2

Exeption for reduced pitException for reduced headroom

*For this load 6 HC doors are necessary

Piston detail

Freight Lift

Q (kg) Speed (m/s) Output (HP)Min. Headroom.

(mm)Min. Pit. (mm)

2000 0,1 - 0,5 6,5 - 30 2900 900

2500 0,1 - 0,5 8 - 40 2900 900

3000 0,1 - 0,5 10,5 - 40 2900 900

3500 0,1 - 0,5 10,5 - 50 2900 900

4000 0,1 - 0,5 13 - 60 2900 900

5000 0,1 - 0,4 15 - 60 2900 900

6000 0,1 - 0,4 20 - 60 2900 900

8000 0,1 - 0,4 25 - 80 3200 1200

10000 0,1 - 0,4 30 - 100 3200 1200

• Technical characteristics:

Nominal speed up to 0,5 m/s

Nominal load up to 10.000 kg

Max. Car height up to 3000 mm

Free height doors from 2000 to 2800 mm

Suspension 1:1 - 2:1

Travel up to 20 m.

Standard headroom 3600 mm.

Standard pit 1200 mm.

Directdraftpistons up to 3,5 m.

Telescopic guide chain pistons

1:1 from 3,6 to 10 m.

This lift is designed for the transport of goods and persons.

• Advantages

Safety: in the event of an electrical failure, the lift descends to

the next floor enabling the passenger to exit.

Flexibility: possibility of integrating any type of control panel.

Easy installation: the design aims to reduce the time requi-

red to install the lift.

Stability: it features a bracing of the car and frame, providing

the structure with more rigidity and stability.

28

www.elevators.ie

• UseoftheFreightLifts

• Thresholds

Type1

Type 2

Distributed load. The weight of one single corner may not ex-ceed in ¼ of the lift’s payload. The load is introduced on pallets, via trolleys or sack barrows.

Non-distributed load or introduced by a forklift (the forklift enters and stays in the lift).

Reinforced aluminium threshold (Standard)Total load: 4800 Kg.Load in support area: 1200 kgs

Solidthreshold(optional)For major loads

Pawl device details

Q (kg) SW SD CW CD CO

2000 2600 2500 1800 2200 1500

2500 3000 2500 2200 2200 1800

3000 3150 2850 2200 2500 1900

3500 3200 3150 2250 2800 2200

4000 3200 3550 2250 3200 2200

5000 3450 3850 2500 3500 2400

8000 4000 4500 2800 4500 2500

10000 4250 5000 3000 4600 2600

Drawing of landing

SW: SHAFT WIDTHSD: SHAFT DEPTHCW: CAR WIDTHCD: CAR DEPTHCO: CAR OPENING

SW

SD

CD

CO

CW

RAL 9002 RAL 8003RAL 1015

RAL 3004

RAL 7032

RAL 6005

RAL 7001

RAL 5003 RAL 9005 OXIRÓN

StructuresThe structures for the Lifts give us flexibility, by eliminating the architectural barriers and giving solutions for the total accessibility

• Characteristics:

Multi-purpose technical solution for every building, they can be adapted to the different constructive requirements. TC series are designed to be integrated in the existing building and its environment.

• Colors RAL

• Advantages:

The works and assembly time are reduced by over 60% on an installation with traditional construction system, with a clean, fast and quiet product.

Absolutely respectful with the environment, both in their as-sembly process and industrial development.

Its easy assembling, makes this product highly simple to work, complying with the higher security standards.

34

www.elevators.ie

SAT-100

TCH01

SAT-100

TCH03

Clap System

TCH01

Protected shaftsStandard glass

Set formed by Glass frosted structure + stairs

Set formed by blind plate structure + stairs

(50 x 50 mm)

Glass panel carFormsBasic forms are exhibited. Please ask for more forms:

Handrails in glass panels areas are mandatory.

Possibility of personalized form and entrenchment.

Optional fixations to the post or flooring according to selected design.

HANDRAIL WITH FIxATIONS TO THE POST

HANDRAIL WITH POD ON GROUND

post glass

handrails

glass

handrails

36

www.elevators.ie

Walls

Domes

Glass (transparent/opaque)

M01-L01

M03 - L03

S01

M04 - L04

I01

M02-L02

Linoleum Dark Grey

Skinplate simil inox.

Black rubber circles

Satin Stainless steel

Black Linoleum

Walls

Floors

Walls

Formica Cherry Tree

Black Nonslip rubber

Walls

Floors

Floors

Walls

Melamine Habana Linen

Artificial stone Gedatsu

Floors

Walls

Formica Cervino Pine

Floors

Walls

Formica Burnt Strand

Black Nonslip rubber

Floors

Cars

38

www.elevators.ie

Elegance

Ice

Marina

Activa Ice

Walls

Walls

Walls

Walls

Walls

Floors

Floors

Floors

Floors

Floors

Formica Punga

Satin stainless steel

Satin stainless steel

Melaminae Blue Azafata

Skinplate White

Linoleum Corn

Artificial stoneWhite North

Artificial stoneRed Eros

Linoleum Corn

Linoleum Blue Sky

Colours shown may vary depending on the means on which they are printed. Raloe shall not be responsible for the variations of the colours.

Panoramic car

RAL 3540 RAL 7023 RAL 5015

RAL 2003

RAL 5021 Canvas

Burnt Strand

Car finishingsPanels

Skin

pla

tes

Me

lam

ine

s

Sta

inle

ss

Fo

rmic

a -

Co

lor

Syste

m

Fo

rmic

a -

Wo

od

s

Gla

ss

Creme

Grey

Azafata Blue

Ecological Green

Ambar Erable

Seringa

St. Steel

Satin

Cherry tree

Stony SandBeech

Leather

Savoy Beech

Blue China

White Creme

Blue Glacier

Beech

Pain

ted

me

tal sh

ee

t

Simile steel

Also available: colours:

Cherry tree

Linen

Glass

Vinyl on glass

Punga

Dark oak (shade of ash)

Chocolate

CaribbeanMicrodot

Cervino Pine

www.elevators.ie

Grey Quartz

Floors

4,5

Kg

/m2

- R

ub

be

r c

irc

les

4,5

Kg

/m2

- N

on

slip

ru

bb

er

4,5

Kg

/m

2 - L

ino

leu

m

56

Kg

/m2

- G

ran

ite

Oth

ers

Colours shown may vary depending on the means on which they are printed. Raloe shall not be responsible for the variations of the colours.

Grey Beige

Brown

North White White Glass

Blue

Grey

Pink

Dark Grey

Dafne Beige Porriño pink

Black

Expo Grey

Pearl Grey

Labrador Blue

Quintana Grey

Intense Black

Black

Blue

Stellar BlackNonslip St. Steel

AluminiumDamero

Embossed Plate

South-Africa Black

Corn

12 K

g/m

26

Kg

/m2

36

Kg

/m2

50

Kg

/m

2 A

rtrific

ial S

ton

e

Cement SPA

Black

Blue Sky

< 900 mm

900 - 1.400 mm

1.400 - 1.800 mm

1.800 - 2.250 mm

> 2.250 mm

MondrianArte

Spots LED

1/2 3/4

Panel LED

Decorative layouts

Mirrors

Decorative edge included in mirror. Mirror finishing: silver, bronze, white or aged.

Plain wall Wall with separation Wall without separation

Straight groove (melamine, laminated or st. steel)

Aluminium groove

St. steel omega

Wall length

Full mirror Vertical slat Perimetermirror

Suspended ceilings

Handrails

Type 1

Shade glass

Polished satin St. steel, golden and black tubular curved

Polished St. Steel tubular straightSt. Steel and black rectangular

Type 6

Type 3

Type 5Ceiling are availabe in

both skinplate and stain-less steel

2 Panels

3 Panels

4 Panels

5 Panels

6 Panels

www.elevators.ie

Epsilon B 50 Q RT42Bas 120

Operating panels

Displays

Car

Type handrail

Push button

Glass

Epsilon Series

Standard

Length: 1960 mm

Lighting

Note: The car operating panel with lighting can be placed in every type of car.

LCD mini 52x42 mm (Standard)

TFT Colour 5,6” 119 x 91 mm

TFT Colour 3,5” 70 x 53 mm

RAL 7032 **

Big Vision panel

Complete glass stainless steel frame

Complete glassVision panel

Folding door Big vision panel

** Availability of different RAL colours. Please ask.The customer can integrate the landing operating panel

in the wall.

Door finishings

Stainless steelsatin

Stainless steel pigskin

Stainless steel gold

Primed * stainless steel

Big vision panel

Doors

Semiautomatics

Control Panel

Automatics

* The prime coat of the doors allows repainting according to the home decoration.

44

www.elevators.ie

IPXX

Quality, our goalWe have spent the last few years improving and refining our lifts as well as creating all types of solutions for different shafts. Today we have over 8 exception certificates as a result of our policy of tailoring each installation to individual needs.

First Figure Second Figure

IPProtection against direct electrical contacts

Protection against penetration of solid foreign bodies

IPProtection against penetration of water

0 No protection No protection 0 No protection

1 Penetration with hand Bodies ø > 50 mm 1 Vertical dripping

2Penetration with finger ø > 12 mm and 80 mm length

Bodies ø > 12,5 mm 2Diverted dripping 15° to the vertical

3 Penetration with tool Bodies ø > 2,5 mm 3Rain. Diverted dripping 60° to the vertical

4 Penetration with wire Bodies ø > 1 mm 4Projections of water in all directions.s

5 Same as 4Dust can penetrate in non-harmful quantities

5 Water jets in all directions

6 Same as 4 No penetration of dust 6Powerful jets of water in all directions

Equipment designed to work in hostile environments must meet certain standards to ensure its reliability and allow the user to know how far they can go in its use.The IP rating system provides a means of classifying the degree of protection for solids (like dust) and liquids (like water) that the equipment must meet. The system is recognized in most countries and is included in several standards, including IEC 60529.

IPPROTECTIONDEGREE

Certificates

Exceptionsofadaptednormsofdirective95/16/CE

Standard UNE EN ISO 9001:2008

Directive of elevators 2006/42/CE, appendix xIII, module H.

Certificate “CE” type of directive 95/16/CE

Depth of reduced pit 2823

Reduced upper vertical distance Hydraulic 2822

Reduced upper vertical distance Traction 2902

Car lift with area greater than 2869

Instalation of 6,5mm supporting rope 2901

Hydraulic lift: Reduced headroom Temporary escape 4012 (according 81:21)

Traction lift : Reduced Headoom Temporary escape 4013 (according 81:21)

Depth of reduced pit 4014 (according to 81.21)

StandardsLift Directive 95/16/CE

EN 81.1:A3 Requirements for protection against

uncontrolled movements of the car.

Electric lifts.

EN 81.2:A3 Requirements for protection against

uncontrolled movements of the car.

Hydraulic lifts.

EN 81.21 Security guidline for construction and installation of lifts. Passenger and freight lifts. New passenger -

and freight lifts in already existing buildings.

EN 81.28 Remote alarm on passenger and

goods and passenger lifts, especia-

lly those covered by the EN 81 Stan-

dards.

EN 81.58 Specification for the test method to

determine the fire resistance test of

the landing doors (*)

EN 81.50 Safety rules for the construction and

lifts installation.

Inspections and tests.

Part 50: Design rules, calculations, ins-

pections and tests of lift components.

EN 81.86 Safety rules for the construction and

lifts installation.

Particular applications for the passen-

ger lifts, and passenger and cargo.

Part 76: Evacuation of disabled per-

sons using lifts.

EN 81.70 Minimum requirements for the safe

and independent access and the

use of the lifts by disabled persons

(Addenda included in standard). This

norm proposes 3 different levels of ac-

cessibility: type1, type 2 y type 3.

EN 81.71

2005

Particular applications to passenger

lifts and goods passenger lifts - Part

71: Vandal resistant lifts.

Type Term Period (min.) Explanation

Integrity E (PF) 30, 60, 120 (others) The non-presence of flames on the opposite side of the door. Nomen-clature: E-xxx (EN 81-58), PF-xxx (Spain, France, Belgium and UK), A-xx (Switzerland).

Isolation EI (RF) 30, 60, 120 (others) The average temperature is measured with thermocouples on the oppo-site side of the door. Nomenclature: EI-xx (EN 81-58), RF-xx (Spain and UK), REI-xx (Italy), A-xx (Sweden), EI-xx (Russia) and F-90 (Germany).

Radiation EW 30, 60, 120 (others) The non-radiation of the door is measured at a point located at one me-ter of distance from the centre of the door.

(*)

Type 1: The car has space for a wheelchair, manual or electric of class A..

Type 2: The car has space for a wheelchair and a companion. The wheelchair can be manual or electric of

the classes A or B.

Type 3: The car has space for a wheelchair and other passengers. The wheelchair can be manual or elec-

tric of the classes A, B or C. It also allows turning the wheelchairs, class A and B inside the car and

persons with walking aids to walk inside of it (people with walking frames…)

Domestic Lift: 0041-MD-RAL001-11-GBR

MyDomestic: IMQ CN396DM

Harmonised Standars

EN-ISO 12100-1

EN-ISO 12100-2

EN- 14121-1

EN-60.204-1

EN-81-41 Vertical platforms for use by disabled people.

Components Regulation Certificates

• Landing door locks

• VC 3006/B parachute valve

• IT 100-S instantaneous parachute

• Door fire test

• Certificate of hydraulic hose tests

CE declaration reg. Car manufacturing

CEdeclarationreg.Hydrauliccarframemanufacturing

Subjected to structural tests in the laboratories of the Technological Ins-

titute of Aragon (ITA) (Spain), an entity specialised in vertical transport

technologies. Amongst these were a bench fatigue test, simulating si-

tuations that are more severe and arduous than real ones, and a free

fall test in a test tower with a load greater than the maximum allowed.

ConformstotheprovisionsofDirectives:

Machinery Directive 2006/42/EC

Low Voltage Directive 2006/95/EC

EMC Directive 2004/108/EC

Types of wheelchairs (According to EN 12184):

• Class A: Compact, easy to handle. Wheelchair is not necessarily able to

avoid obstacles outdoors.

• Class B: Wheelchair compact and handy enough for some areas inside

and capable to get over certain obstacles outdoors.

• Class C: Wheelchairs, usually of a large size, not necessarily for inside

use, but capable to travel longer distances and to avoid obstacles outdoors.

EN 81.72 Firefighters Lifts located within a fire protected evironment.

EN 81.73 Safety rules to guarantee the behavior of lifts in the event

of fire in a building.

VDI 4707 Energy efficiency of lifts.

VDI 2566-2 Acoustic design for lifts without machine room.

EC Examination of the Directive 2006/42/EC type

Elevators.ie, Unit 1M, KCR Estate, Dublin 12 R798.+353 (0) 1 514 3766 info@elevators.ie