LIFT TRUCKS

GENERAL CARGOFORKLIFT TRUCKSROBUST AND COST-EFFECTIVE

Terex forklift trucks are part of the comprehensive Terex Port Solutions (TPS) lift truck product line including reach stackers, empty container handlers and full container handlers.

Terex forklift trucks are designed for hard service and maneuver­ability, even in the most extreme working conditions – without sacrificing safety or comfort. For the flexible handling of general cargo or containers, the different variants have lifting capacities of up to 52 t. For Roll­on/Roll­off (RoRo) applications, operators can use variants with a special low body.

Terex forklift trucks can be fitted with Terex forks in customer­ specific dimensions, or with a variety of other load handling attachments, such as coil lifters, magnets or locking clamps.

They can also be fitted with fixed or telescopic container spreaders. This means that, in addition to use in harbour terminals, the machines can also be employed in a variety of other fields, such as the steel, construction or timber industries.

Advantages A Excellent cargo handling performance thanks to high-performance and high lifting capacity

A Versatile application thanks to different load-handling attachments

A Simple operation thanks to ergonomic, compact design

A Safe, stable handling thanks to robust design with low centre of gravity

A Cost-effective operation thanks to modern, environmentally friendly drive technology and low maintenance costs

The range of Terex forklift trucks

Models Max. lifting capacity [t]

Max. lifting height [mm]

Standard forks width [mm]

3,500 4,100 5,100 650 1,000 1,150 1,350

FDC 150 15 ✔ ✔FDC 160 16 ✔ ✔FDC 180 18 ✔ ✔FDC 200 20 ✔ ✔FDC 250 25 ✔ ✔FDC 280 28 ✔ ✔FDC 300 30 ✔ ✔FDC 320 32 ✔ ✔FDC 350 35 ✔ ✔FDC 380 38 ✔ ✔FDC 420 42 ✔ ✔FDC 450 45 ✔ ✔FDC 480 48 ✔ ✔FDC 520 52 ✔ ✔

FDC 200 forklift truck handles a wide range of cargo with weights of up to 20 t

FLEXIBLE CARGO HANDLING TEREX® FORKLIFT TRUCKS

2 3

Terex® forklift trucks offer high­speed stacking capabilities up to 5,100 mm with maximum capacities of up to 52 t on the fork.

FDC 150 FDC 160 FDC 180

FDC 280 FDC 300 FDC 320

FDC 420 FDC 450 FDC 480

FDC 200 FDC 250

FDC 350 FDC 380

FDC 520

All dimensions in mm. All capacities in t.

3,50

04,

100

5,10

0

18

32

48

3,50

04,

100

5,10

0

3,50

04,

100

16

30

45

25

38

3,50

03,

500

5,10

0

3,50

04,

100

5,10

0

15

28

42

20

35

52

EXAMPLE PRODUCT DESIGNATION

Maximum lifting capacity in t (52)

The maximum hoist load is shown in the first two digits of the three-digit model number.

Short product name

fdc 520

The load charts lead you quickly to the Terex forklift truck model that best suits your handling requirements for general and heavy project cargo.

STACKING HIGH LOAD CHARTS FOR THE WHOLE RANGE

4 5

Models FDC 150 FDC 160 FDC 180 FDC 200 FDC 250 FDC 280 FDC 300 FDC 320 FDC 350 FDC 380 FDC 420 FDC 450 FDC 480 FDC 520

Speeds

Lifting

– laden [m/s] 0.31 0.20 0.20

– unladen [m/s] 0.33 0.26 0.26

Lowering

– laden [m/s] 0.26 0.25 0.25

– unladen [m/s] 0.25 0.21 0.21

Traveling

– laden [km/h] 26 25 24 24 25 24

– unladen [km/h] 28 27 25 25 26 25

Weights

Maxium static front axle load

– laden [t] 34.8 36.5 39.0 41.0 54.6 59.5 62.0 70.0 75.0 77.2 87.9 92.0 96.1 102.7

– unladen [t] 11.0 11.0 11.0 12.0 17.0 15.0 17.5 22.0 23.0 27.0 27.5 28.0 28.5 29.5

Maxium static rear axle load

– laden [t] 3.2 3.5 3.5 5.0 4.4 4.5 6.0 7.0 8.0 7.8 9.6 11.0 10.9 10.3

– unladen [t] 12.0 13.0 13.5 14.0 17.0 18.0 20.5 23.0 25.0 27.0 28.0 30.0 31.5 31.5

Dead weight [t] 23.0 24.0 24.5 26.0 34.0 36.0 38.0 45.0 48.0 54.0 55.5 58.0 59.0 61.0

Capacities and pressures

Fuel tank capacity [l] 290 290 340 340 460 460 460 415 415 500 500 520 605 605

Hydraulic oil tank capacity [l] 315 315 395 395 425 425 425 575 575 600 600 670 800 800

Hydraulic pressure [bar] 160 160 170 170 180 160 160 160 160 170 170 180 180 180

Travel gear

Number of wheels 6 6

Steered / driven axles 1 / 1 1 / 1

Tire sizes 4 x 12.00­202 x 12.00­20

4 x 12.00­242 x 12.00­24

4 x 14.00­242 x 14.00­24

4 x 14.00­242 x 14.00­24

4 x 16.00­252 x 16.00­25

4 x 18.00­252 x 18.00­25

4 x 18.00­332 x 18.00­25

Number of gears forward / reverse 3 / 3 3 / 3 4 / 4

State-of-the-art drive trainTerex® forklift trucks offer high handling performances and reduced operating costs thanks to their modern design and components. They combine a state­of­the­art drive train with engines and transmissions providing low fuel consumption and low exhaust emissions with powerful hydraulics and prime axle components.

Impressive performance dataThe technical specifications below offer detailed information about the impressive performance of Terex reach stackers, including stacking capacities, speeds and weights.

1) not available for model FDC 380

2) only available for model FDC 500

Diesel engines and transmissions for Terex forklift trucksModels Standard engines Optional engines

FDC 150FDC 160FDC 180FDC 200

Volvo TAD750VE Tier 3 (Stage IIIA)181 kW @ 2,300 rpm952 Nm @ 1,500 rpm

Volvo TAD761VE Tier 4i (Stage IIIB) 160 kW @ 2,200 rpm

1,156 nM @ 1,320 rpm

Cummins QSB6.7 Tier 3 (Stage IIIA)142 kW @ 2,400 rpm930 Nm @ 1,500 rpm

Cummins QSB6.7 Tier 4i (Stage IIIB)149 kW @ 2,200 rpm929 Nm @ 1,400 rpm

Volvo TAD572VE Tier 4f (Stage IV)160 kW @ 2,300 rpm910 Nm @ 1,200 rpm

Cummins QSB6.7 Tier 4f (Stage IV)149 kW @ 2,200 rpm929 Nm @ 1,500 rpm

Standard transmission Optional transmission

Dana TE 13Speeds, forward / reverse

3 / 3

ZF WG 171Speeds, forward / reverse

3 / 3

Models Standard engines Optional engines

FDC 250FDC 280FDC 300FDC 320FDC 350

Volvo TAD750VE Tier 3 (Stage IIIA)181 kW @ 2,300 rpm952 Nm @ 1,500 rpm

Volvo TAD762VE Tier 4i (Stage IIIB) 185 kW @ 2,200 rpm

1,156 nM @ 1,320 rpm

Cummins QSC8.3 Tier 3 (Stage IIIA)183 kW @ 2,200 rpm

1,162 Nm @ 1,500 rpm

Cummins QSB6.7 Tier 4i (Stage IIIB)194 kW @ 2,200 rpm990 Nm @ 1,500 rpm

Volvo TAD871VE Tier 4f (Stage IV)185 kW @ 2,300 rpm

1,150 Nm @ 1,160 rpm

Cummins QSB6.7 Tier 4f (Stage IV)149 kW @ 2,200 rpm929 Nm @ 1,500 rpm

Standard transmission Optional transmission

Dana TE 17Speeds, forward / reverse

3 / 3

ZF WG 211Speeds, forward / reverse

3 / 3

Models Standard engines Optional engines

FDC 380FDC 420FDC 450FDC 480FDC 520

Volvo TAD1340VE Tier 2 (Stage II)256 kW @ 2,100 rpm

1,770 Nm @ 1,260 rpm

Volvo TAD1360VE Tier 4i (Stage IIIB)1) 256 kW @ 1,900 rpm1,740 nM @ 1,000 rpm

Volvo TAD952VE Tier 3 (Stage IIIA)242 kW @ 2,100 rpm

1,700 Nm @ 1,300 rpm

Cummins QSX11.9 Tier 4i (Stage IIIB)250 kW @ 2,100 rpm

1,250 Nm @ 1,400 rpm

Cummins QSM11 Tier 3 (Stage IIIA)246 kW @ 2,100 rpm

1,674 Nm @ 1,400 rpm

Volvo TAD1171VE Tier 4f (Stage IV)265 kW @ 2,100 rpm1,785 Nm @ 950 rpm

Cummins QSL9 Tier 4f (Stage IV)248 kW @ 2,100 rpm

1,424 Nm @ 1,500 rpm

Cummins QSG12 Tier 4f (Stage IV)2)

280 kW @ 2,100 rpm1,969 Nm @ 1,400 rpm

Standard transmission Optional transmissions

Dana TE 32Speeds, forward / reverse

4 / 4

ZF WG 261Speeds, forward / reverse

4 / 4

ZF WG 3112)

Speeds, forward / reverse4 / 4

EFFICIENT DRIVES, HIGH PERFORMANCE TECHNICAL SPECIFICATIONS

6 7

FDC 150 FDC 160 FDC 180 FDC 200 FDC 250 FDC 280 FDC 300 FDC 320 FDC 350 FDC 380 FDC 420 FDC 450 FDC 480 FDC 520

Height

H1 Total height, mast fully extended [mm] 5,150 5,150 5,350 5,350 5,700 6,000 6,000 6,300 6,500 7,000 7,500 7,700 7,700 8,000

H2 Max. lifting height on forks [mm] 3,500 3,500 3,500 3,500 3,500 3,500 3,500 4,100 4,100 4,100 5,100 5,100 5,100 5,100

H3 Total height, mast closed [mm] 3,400 3,400 3,650 3,650 4,000 4,300 4,300 4,300 4,500 5,000 5,000 5,200 5,200 5,500

H4 Driver seat height [mm] 2,300 2,300 2,300 2,300 2,400 2,300 2,300 2,700 2,900 3,500 3,500 3,500 3,500 3,500

H5 Cab height [mm] 3,400 3,400 3,400 3,400 3,500 3,500 3,500 3,800 4,000 4,600 4,600 4,600 4,600 4,600

H6 Ground clearance mast closed (unladen) [mm] 250 250 250 250 300 300 300 300 350 350 350 350 350 350

H7 Ground clearance truck (laden) [mm] 400 400 400 400 450 500 500 500 550 550 550 550 550 600

Width

W1 Outer chassis width/ width outer front wheels [mm] 2,500 2,500 2,500 2,500 2,980 3,000 3,000 3,400 3,400 3,800 4,200 4,200 4,200 4,200

W2 Width inner front wheels [mm] 2,270 2,270 2,270 2,270 2,800 2,950 2,950 2,950 2,950 3,150 3,150 3,150 3,150 3,150

W3 Inner chassis width [mm] 1,860 1,860 1,860 1,860 2,160 2,160 2,160 2,530 2,530 2,970 2,970 3,370 3,370 3,370

W4 Width of forks (standard) [mm] 650 650 650 650 1,000 1,150 1,150 1,150 1,150 1,350 1,350 1,350 1,350 1,350

W5 Axel width rear wheels [mm] 2,080 2,080 2,080 2,080 2,100 2,100 2,100 2,550 2,550 2,580 2,580 2,580 2,580 2,580

W6 Width outer rear wheels [mm] 2,470 2,470 2,470 2,470 2,580 2,600 2,600 3,100 3,100 3,100 3,100 3,100 3,100 3,100

Length

L1 Truck length [mm] 5,500 5,550 5,800 5,800 6,350 6,650 6,650 6,800 7,100 7,250 7,750 8,000 8,250 8,550

L2 Front overhang [mm] 1,000 1,000 1,000 1,000 1,050 1,100 1,100 1,150 1,200 1,300 1,300 1,300 1,300 1,350

L3 Wheelbase [mm] 3,750 3,750 4,000 4,000 4,500 4,750 4,750 4,750 5,000 5,000 5,500 5,750 6,000 6,250

L4 Rear overhang [mm] 800 800 800 800 800 800 800 9 00 900 950 950 950 950 950

L5 Distance to fork center [mm] 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225

Other dimensions

R1 Front turning radius [mm] 900 900 900 900 1,000 975 975 975 950 1,050 950 975 975 1,000

R2 Rear turning radius [mm] 5,000 5,300 5,600 5,600 6,100 6,700 6,700 6,800 7,000 7,000 7,550 7,800 8,000 8,200

α Angle of inclination (front) [°] 6 6 5 5 5 5 5 5 5 5 5 5 5 5

β Angle of inclination (back) [°] 12 12 10 10 10 12 12 12 12 12 12 12 12 12

F1 Thickness of standard fork [mm] 100 100 100 100 110 110 110 110 110 120 135 150 150 150

F2 Width of standard fork [mm] 220 220 220 250 250 250 270 300 300 300 300 300 300 300

F3 Length of standard fork [mm] 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450F4 Forks front adjustment [mm] +/­ 410 +/­ 410 +/­ 410 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450 +/­ 450

The Terex® general cargo forklift truck product line comprises fourteen models with lifting capacities from 15 to 52 t for great flexibility.

With a two mast stage design, these models reach lifting heights up to 5.1 m. The forks can be adjusted quickly up to +/­ 450 mm and can be equipped with dedicated lifting gear to handle any kind of general cargo.

H1

H2

H3

H4

H5

H6

H7

α β

L1

L3L5 L2 L4

W1

W2

W3

W4

R1R2

W5

W6

Terex® forks

F4

F2

F3

F1

COMPACT DESIGN MAIN DIMENSIONS

8 9

SUITED TO YOUR NEEDSSTANDARD AND OPTIONAL EQUIPMENT

EquipmentSection Standard Option

Control systems

Motronica® Vehicle Management System ✔Anti­tipping device ✔Rear parking sensors ✔Rear camera ✔Full vision system ✔Cab

Ergonomically designed, soundproofed cab(noise level ≤ 75 dB(A)) ✔

Tilting cab (for models FDC 150 – 280) ✔

Rear mounted cab ✔Driver seat belt ✔Air suspension seat ✔Trainer seat ✔Air conditioning and heating system ✔CD audio system ✔Terex® forks and lifting gears

Forks mounted fixed spreader 20‘(for models FDC 250 – 350) ✔

Forks mounted fixed spreader 40‘(for models FDC 380 – 450) ✔

Hydraulic forks mounted spreader 20‘ – 40‘light version (for models FDC 250 ­ 350) ✔

Hydraulic forks mounted spreader 20‘ – 40‘heavy version (for models FDC 380 ­ 520) ✔

Inverted forks beam(for models FDC 320 ­ 450) ✔

Inverted forks ✔

Section Standard Option

Additional design features

Lighting

– Bulb traffic and working lights ✔– LED traffic and working lights ✔– Additional LED working lights ✔Tires

– Tubeless pneumatic tires ✔– Superelastic tires ✔– Spare tire ✔– Tire pressure display ✔Others

Automatic greasing for chassis, and mast ✔Low temperature kit ✔Fire suppression system ✔Heated rear view mirrors ✔Emergecy steering pump ✔Load moment indicator ✔Rear hydraulic compensators ✔Dry disc breakes on steering axle ✔

Terex® forklift trucks are designed for a large variety of general cargo handling and can be easily equipped with various lifting gear to handle steel products, pelletized goods, bags and much more, quickly, safely and eco nomically.

In order to further increase the operability and efficiency of the Terex forklift trucks, TPS also offers a large number of options in addition to the standard equipment.

More information about additional options on request.Based on individual needs, we can supply lifting gear.

Working hand in handIn many multipurpose and specialized terminals Terex® forklift trucks work hand in hand with Terex® Gottwald harbour cranes – an example of how TPS offers solutions for the whole general cargo logistic chain, from the quayside to the warehouse.

Terex forklift trucks handle containers with spreader or forks ...

... in addition to a large variety of general cargo ...

... including steel withA forksA clambsA magnetsA coil mandrel

10 11

AROUND THE CLOCK, AROUND THE WORLD,AROUND YOUR BUSINESS LIFE CYCLE SUPPORT

Global support on a local levelWe are committed to keeping your equipment in service to increase your return on investment. Whether support comes from a local distributor or direct from the factory, operators can depend on Terex Port Solutions.

A Erection and commissioning A Maintenance team and operator training A Parts management A Inspection and maintenance A Refurbishment and upgrades A Repairs A Fleet management A Relocation

www.terexportsolutions.com

TEREX OPERATIONS ITALY srlVia Cisa Ligure 51/A, 42041 Lentigione di Brescello (RE), ItalyPhone: +39 0522 967444Fax: +39 0522 680426tps.info@terex.com www.terexportsolutions.com

Effective date: June, 2014. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or otherwise failure to act responsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex Port Solutions makes no other warranty, express or implied. Terex, the Terex Crown design, Terex Gottwald, Motronica and Works For You are trademarks of Terex Corporation or its subsidiaries. All other trademarks are property of their respective owners. © 2014 Terex Corporation.

TPS

­FLT

­TD

­EN

­02

Our skilled service team is always close to you and enables you to exploit the full potential of your equipment and boost your productivity