G_D_&_T

download G_D_&_T

of 40

description

gd&t ppt

Transcript of G_D_&_T

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)Purpose is to describe the engineering intent of parts and assembliesUses symbols to specify geometric characteristics and dimensional requirementsCurrent GD&T standard: ANSI/ASME Y14.5M-2009Symbols for:Form and profile tolerances, orientation tolerances, location tolerances, runout tolerances

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)Feature control frame

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

    Examples of Modifiers

    MMC Maximum Material ConditionLMC Least Material Condition

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

    ISO standard of preferred metric limits and fits: In the dimension 16h11, the tolerance zone is specified by a letter and a number, I.e. h11. An uppercase letter indicates that the tolerance applies to the hole; a lowercase letter indicates the tolerance applies to the shaft.

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GD&T

  • GD&T

  • GD&TBasic Dimension: Theoretically exact, untoleranced dimensions that specify the perfect location, size, shape, or angle of a feature.Basic dimensions are identified by enclosing the dimension in a box.Basic dimensions specify theoretically exact value from which variations are defined through feature control frames as well as toleranced features and notes.General tolerances do not apply to basic dimensions.

  • GD&T

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features

  • GD&T Datum Surfaces and Features


' r-orsfiles.libertyfund.org/files/1115/05Errors_Bk.pdfHerecomes the almana_keof my truedate : /_t. HapleffeE_eonwhom thefateshaue matkt What now ?How chancethou artrctum'd fo foone,

' r-orsfiles.libertyfund.org/files/1115/05Errors_Bk.pdfHerecomes the almana_keof my truedate : /_t. HapleffeE_eonwhom thefateshaue matkt What now ?How chancethou artrctum'd fo foone,

Trees and the Public Realm - City of Westminstertransact.westminster.gov.uk/docstores/publications_store/Trees_&_t… · 2. Trees are therefore now, in most cases, an integral and

Trees and the Public Realm - City of Westminstertransact.westminster.gov.uk/docstores/publications_store/Trees_&_t… · 2. Trees are therefore now, in most cases, an integral and

Simulation de l'effet de changements de pratiques ... · ?p"mur w qqwt"w v?r¯l)m¼l?l,luj p"l _i¼ p"jsl"r r=v?r r=qzm5 ¦w iuvgqz l l w r¯p5 sl? ,j qb _t a ,J Qb _T a W¾TUJ L)a

Simulation de l'effet de changements de pratiques ... · ?p"mur w qqwt"w v?r¯l)m¼l?l,luj p"l _i¼ p"jsl"r r=v?r r=qzm5 ¦w iuvgqz l l w r¯p5 sl? ,j qb _t a ,J Qb _T a W¾TUJ L)a

Cable Tray _T&B

Cable Tray _T&B

Steel structures practical_design_studies_2nd_ed_-_t..j.mac_ginley

Steel structures practical_design_studies_2nd_ed_-_t..j.mac_ginley

Objective Scratch and Dig Measurementssavvyoptics.com/files/Objective_scratch_and_dig_measurements_-_T… · 4. A manual, position encoded 100 mm x-y stage platform with rails for

Objective Scratch and Dig Measurementssavvyoptics.com/files/Objective_scratch_and_dig_measurements_-_T… · 4. A manual, position encoded 100 mm x-y stage platform with rails for

Book UFO Files/1950s... · , , • • • • • • • PROJECT 10073 RECORD CARD • • • ;_t.. __ :._A_T_E_., ___ ,.,.. ----------1 ( ------------------------~------~: 2:

Book UFO Files/1950s... · , , • • • • • • • PROJECT 10073 RECORD CARD • • • ;_t.. __ :._A_T_E_., ___ ,.,.. ----------1 ( ------------------------~------~: 2:

joaocastelo.weebly.comjoaocastelo.weebly.com/uploads/4/6/6/5/466535/beautiful_minds_-_t… · CONTENTS Introduction: Beautifu Mindl s 1 1 A Eternan Fascinatiol 1n 5 2 Tw Historieo

joaocastelo.weebly.comjoaocastelo.weebly.com/uploads/4/6/6/5/466535/beautiful_minds_-_t… · CONTENTS Introduction: Beautifu Mindl s 1 1 A Eternan Fascinatiol 1n 5 2 Tw Historieo

REALISASI PENANAMAN MODAL PMDN - PMA …dpmptsp.riau.go.id/media/file/72719293506Bahan_Paparan_-_IND_-_T… · dilakukan selama 3 bulan periode laporan (Juli –September 2016) ...

REALISASI PENANAMAN MODAL PMDN - PMA …dpmptsp.riau.go.id/media/file/72719293506Bahan_Paparan_-_IND_-_T… · dilakukan selama 3 bulan periode laporan (Juli –September 2016) ...

8 CORVETIE COUPE - CorvSport.com · 2018. 2. 12. · __ .. ,100 .. ... .. t_ ....,. "' 001) ..... 10 .. ..... : • ...: " ••• 01 01' ..... G. ... • : ... i'._t t ..... b

8 CORVETIE COUPE - CorvSport.com · 2018. 2. 12. · __ .. ,100 .. ... .. t_ ....,. "' 001) ..... 10 .. ..... : • ...: " ••• 01 01' ..... G. ... • : ... i'._t t ..... b

Moneyand BiasedTechnical Progress: A Further. Test …psasir.upm.edu.my/2955/1/Money...Technical_Progress_A_Further._T… · Muzafar Shah Habibullah hypothesis, using data from the

Moneyand BiasedTechnical Progress: A Further. Test …psasir.upm.edu.my/2955/1/Money...Technical_Progress_A_Further._T… · Muzafar Shah Habibullah hypothesis, using data from the

G d &_t

G d &_t

Introduction to Chemistryplainscience.weebly.com/uploads/7/9/1/7/7917337/chemistry_-_t... · Mendeleev’s Table of Elements ... Unit 1: Introduction to Chemistry and the Nature of

Introduction to Chemistryplainscience.weebly.com/uploads/7/9/1/7/7917337/chemistry_-_t... · Mendeleev’s Table of Elements ... Unit 1: Introduction to Chemistry and the Nature of

Safrudin, Norizan,Recker, Jan, &Rosemann, Michaeleprints.qut.edu.au/41767/1/Safrudin,_Recker_&_Rosemann_(2011)_T… · Business transformations are large-scale organizational change

Safrudin, Norizan,Recker, Jan, &Rosemann, Michaeleprints.qut.edu.au/41767/1/Safrudin,_Recker_&_Rosemann_(2011)_T… · Business transformations are large-scale organizational change

Reference systems for electrode manufacture and die ... _T … · Reference systems for electrode manufacture and die-sinking EDM. The standard range.

Reference systems for electrode manufacture and die ... _T … · Reference systems for electrode manufacture and die-sinking EDM. The standard range.

Casina - documentacatholicaomnia.eu_Plautus._T… · Nec mihi ius meum optinendi optiost. MY. Mira sunt, uera si praedicas: nam uiri Ius suom ad mulieres optinere haud queunt. CLE.

Casina - documentacatholicaomnia.eu_Plautus._T… · Nec mihi ius meum optinendi optiost. MY. Mira sunt, uera si praedicas: nam uiri Ius suom ad mulieres optinere haud queunt. CLE.

AG U id eto Forest Forestry North Central t°ateStnExperiment .../ AUnitedDepartmentgricultureStatesof AG U id eto ServiceForest Forestry North Central _t ateStnExperiment Investment

AG U id eto Forest Forestry North Central t°ateStnExperiment .../ AUnitedDepartmentgricultureStatesof AG U id eto ServiceForest Forestry North Central _t ateStnExperiment Investment

tc ·~~. T-- · IINllfmseuhh~Ji.. ____ _t_____ _\1u::~_:;;;~:.:~_'{_I_J.lt)1l{_t.~. aeut~~f~vt _____ 2_ _____ iuvt _____ ~ __ f _____ ~--~-

tc ·~~. T-- · IINllfmseuhh~Ji.. ____ _t_____ _\1u::~_:;;;~:.:~_'{_I_J.lt)1l{_t.~. aeut~~f~vt _____ 2_ _____ iuvt _____ ~ __ f _____ ~--~-

S COuNlY @i(ttttbt llttws ltiJ ltW - Greenbelt News Reviewgreenbeltnewsreview.com/issues/GNR19570314.pdf · r•Fet.O>"· :··-·-~·--· ..... _ ~-· _) \_ PR\NCE c _t-.

S COuNlY @i(ttttbt llttws ltiJ ltW - Greenbelt News Reviewgreenbeltnewsreview.com/issues/GNR19570314.pdf · r•Fet.O>"· :··-·-~·--· ..... _ ~-· _) \_ PR\NCE c _t-.

Lateral variability of sedimentology, mineralogy, and ..._T.,_BSc_Honours... · Lateral Variability of Sedintentology, Mineralogy and Geochemistry in the HYC Zn-Pb-Ag deposit, Northern

Lateral variability of sedimentology, mineralogy, and ..._T.,_BSc_Honours... · Lateral Variability of Sedintentology, Mineralogy and Geochemistry in the HYC Zn-Pb-Ag deposit, Northern