GD-36 - DSS · 2017. 1. 9. · gd-36 4 ok fault music message rec mic usb gd-36 menu on inh input...
Transcript of GD-36 - DSS · 2017. 1. 9. · gd-36 4 ok fault music message rec mic usb gd-36 menu on inh input...
-
1610.396A
DIGITAL RECORDER AND PLAYER
OF MESSAGES AND BGM
GD-36
BACKGROUND
MUSIC
10 IN
REMOTE
CONTROLS
10 OUT
REMOTE
CONTROLS
MARKETING
SOLUTIONS
SCHEDULED
ANNOUNCEMENTS
IP
CONTROL
2 EN54
MESSAGES
REG
OPTIONS
MP3
PLAYER
230 VAC
POWER SUPPLY
GD-36
OK
MUSIC MESSAGE REC MICFAULT USB
GD-36
MENU
ON
INPUT TL
GN
D
INH
FAULT POWER
24 VDC
ON
FUS DC
F 1A
OFF
10 10
OUTPUT TL
0 dBOUTPUT
L R
SD CARD
9 98 87 76 65 54 43 32 21 1GN
D
TM
24
VD
C
24
VD
C
MADE IN
SPAIN 230 VAC
50/60 Hz
FUS
T 0,5A
¡ATENCION! DESCONECTAR LA RED ANTES DE ABRIR¡CAUTION! DISCONNECT FROM POWER SUPPLY BEFORE OPENING
28
C/ LUIS I, 88, 3ª planta
28031 - MADRID
ESPAÑA
Tel: 34-91 311 60 76
Fax: 34-91 450 19 97
Madrid
Delegation
Main
Office
Avda. BARCELONA, 24
08970 - SANT JOAN DESPÍ
BARCELONA - ESPAÑA
Tel: 34-93 477 28 54
Fax: 34-93 261 17 52
UDE reserves the right to modify the technical characteristics of its products without previous notice
-
BASIC SETUP
Message list
Music list
Program list
Language selection
Adjustments
Contrast adjustment
Volume adjustment
SUMMARY
FRONT AND BACK VIEWS
DESCRIPTION1.-
2.-
3.-
4.-
4.1.-
4.2.-
4.3.-
4.4.-
4.5.-
5.-
6.-
6.1.-
6.2.-
6.3.-
6.4.-
6.4.1.-
6.4.2.-
6.4.3.-
6.4.4.-
6.4.5.-
6.4.6.-
7.-
8.-
7.1.-
7.2.-
7.2.1.-
7.2.2.-
7.2.3.-
7.2.4.-
7.2.5.-
6.4.1.1.-
5.1.-
5.2.-
5.3.-
5.4.-
5.5.-
5.5.1.-
5.5.2.-
TECHNICAL SPECIFICATIONS
BASIC OPERATIONS
Digital audio storage
Screen information
Keyboard
Operating indicator lights (LED)
Turn ON / OFF the unit
5
6
6
7
8
8
8
8
9
9
10
10
11
11
11
12
12
13
13
13
14
15
16
17
17
18
19
20
28
21
23
23
24
26
27
27
4
3
WEBSERVER
FTPSERVER
System Status
Service menu
System Settings
Calendar events
Remote events
Change password (level 1: maintenance)
Supervisor menu
ADVANCED SETUP
Supervisor setup
Supervised messages
Inhibition input
System adjustments
Ethernet setup (remote access)
Recording messages
Clock and Date setup
Message setup (remote input activation)
Remote input messages setup
Calendar events setup
Local Network setup (IP mode)
PAGE
GD-36
2610.396A 28
-
GD-36
3
The GD-36 is suitable for commercial and for security sound uses in rooms with large crowds, which
requires the diffusion of automatic reminders (ads), emergency, evacuation, and so on, due to the
basic features detailed below: The GD-36 digital recorder can digitally record and play an unlimited
number of ads, the limitation is the size of external memory available. GD-36 can record and
playback messages to or from the SD Card (SDHC type), available on the rear panel, but also allows
to play background music (BGM) from SD card or from a USB flash memory, connected on the front
USB socket.
The messages can be scheduled by an internal calendar by creating a series of events, called
"Programs" which records the characteristics associated with the related message, such as: Start
Time, End Time, Cadence, Loop,Activation remote outputs, etc ... and once achieved all the criteria,
GD-36 activates the message automatically. Also, turn allows manual issuance of any message
sender in the system memory.
Additions, GD-36 allows the remote activation of messages through remote control inputs, which
you can associate a particular digital voice file, a priority factor, the activation type (open or closed
contact) and if should respond to momentary or continuous pulse (switch).
To comply with current security regulations, GD-36 allows monitoring of up to two pre-recorded
messages, which are checked periodically to ensure its content, and degradation if any of them, let
us know in a maximum of 100 seconds by activation of an LED light in the front panel, and by opening
the FAULT contact located on the rear panel.
The device is ready to be powered fromAC line (230Vac) and from DC line (24Vdc, Battery Backup),
so that it can keep operating even during AC power drops; also has a clock / calendar with
independent power supply, which ensures that any scheduled event can be activated at the preset
time.
If required by the client, GD-36 enables remote monitoring of equipment status using the
ETHERNET LAN connector, as well as allows the activation of pre-recorded messages or warnings,
the scheduling of calendar events and the remote audio files update. To use this function some
equipment and extra wiring is required, as well as the correct configuration of equipment related to
the computer network will be connected to which GD-36 (see section Remote Management for
details).
The digital recorder and player message has an internal webserver and can accept music or
message file transfer by Internet.
SF-36 is the software that makes easier and faster the administration of the GD-36 in many different
locations, always connected to Internet. With any windows OS the user will be available to choose
any characteristic of the equipment: Event calendar, time change, manage supervised messages,
file transferring. The software can automatically send this entire new characteristic and also the
audio files to all GD-36 programmed, in many different places connected to Internet based in the
TCP/IP protocol.
It is highly recommended, for clients who manage many different types of equipment, in many
places, and want to minimize the organization time, with a comfortable user experience.
GD-36 and SF-36 are sold differently. Check prices from UDE commercial department.
Programa SF-36 (Opcional)
1.- DESCRIPTION
610.396A 28
-
GD-36
4
OK
MUSIC MESSAGE REC MICFAULT USB
GD-36
MENU
ON
INPUT TL
GN
D
INH
FAULT POWER
24 VDC
ON
FUS DC
F 1A
OFF
10 10
OUTPUT TL
0 dBOUTPUT
L R
SD CARD
9 98 87 76 65 54 43 32 21 1GN
D
TM
24
VD
C
24
VD
C
MADE IN
SPAIN 230 VAC
50/60 Hz
FUS
T 0,5A
¡ATENCION! DESCONECTAR LA RED ANTES DE ABRIR¡CAUTION! DISCONNECT FROM POWER SUPPLY BEFORE OPENING
1. STANDBY / ON indicator lamp.
15. RJ-45 socket.
16. SD CARD socket.
17. Balanced mono audio output (XLR).
18. Stereo audio output (RCA).
19. Output remote controls.
20. Input remote controls.
21. Fire alarm interface.
22. 24 Vdc secondary power supply system.
24. 230 Vac main power supply.
23. DC Fuse (1A).
25. AC Fuse (0,5A).
26. ON / OFF switcher.
2. FAULT indicator lamp.
3. MUSIC indicator lamp.
4. MESSAGE indicator lamp.
5. REC indicator lamp.
6. Microphone.
7. Headphones plug.
8. USB receptacle.
9. LCD screen.
10. NAVIGATOR.
11. MENU button.
12. BACK button.
13. PLAY / PAUSE button.
14. STOP button.
21
15
3
16
4 5
17
6
18
7 8
19 20 21 22 23 24 25 26
9 10 12 14
1311
2.- FRONT AND BACK VIEWS
610.396A 28
-
Output level1
0dBu (0,8Vrms/600 Ω)
Output type XLR (Balanced: MONO), RCA (L,R: STEREO)
Message recording2
Electret microphone built-in, AGC active, Gain max: x16
Message list 100
Program event list (Calendar) 100
Music track list 150
Real time clock and calendar battery Lithium 3V cell 3V CR2025 (No rechargeable type)
Supported file type •
•
Voice: WAV (PCM/ADPCM/OGG)
Music: MP3.
Audio format (recording) Codec: Vorbis Ogg, Hi-Fi Voice Profile, Sampling Frequency: 44.1KHz, MONO, 16 bits,
typical bitrate: 36kbps
Formato Audio (Reproductor) Mp3 Files:
MPEG 1.0
MPEG 2.0
MPEG 2.5
RIFF WAV Files
Orbis OGG Files
Sample rate (Hz): 48.000, 44.100, 32.000 Bitrate (kbit/s):
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320.
Sample rate (Hz): 24.000, 22.050, 16.000 Bitrate (kbit/s):
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320.
Sample rate (Hz): 12.000, 11.025, 8.000 Bitrate (kbit/s):
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320.
(1 o 2 canales)
Formato 0x01: PCM, 8 o 16 bits, Sample rate
-
Remote operations Through Webserve installed on the device, following operations are allowed:
Full Status monitoring.
Play or Stop audio messages, music tracks and programs remotely.
Scheduling Calendar events.
Programming remote events.
Remote Setup (Date and Time, Volume, IP Mode, ON/OFF,…)
Through FTPServer installed on the device is available the remote update of audio (MP3 &
WAV) and settings (SETTINGS.BIN) files.
r
•
•
•
•
•
6
7
Security Up to 2 level of 4-digits Security Password.
Maintenance (Level 1).
Supervisor (Level 2).
•
•
Failure indicator (FAULT) By LED: FAULT RED led becomes ON on Front panel in Failure Condition.
By Contact: FAULT Open Contact on Rear panel in Failure Condition.
Supervised messages 2 (maximum failure or degradation detection time 100 seconds)
Power supply system Mainl 230Vac (50/60Hz),1A fused.
Secondary (tampon method): 24Vdc, 1A fused.
Auxiliary supply output 24Vdc / 100mA maximum (0.3A fused).
Operation temperature -5 a +45ºC (+5 a +35ºC, recommended)
Storage temperature -15 a +60ºC
Humidity 5% a 95%, without condensation.
Dimensions 428 x 57 x 330 mm (1 U)
Weigth 2,9 Kg
Color Black.
4. BASIC OPERATIONS
GD-36 basically acts as a music player (BGM), but lets stop the broadcasting of music to issue a warning, pre-recorded message
or sound activated either manually from the local keyboard, or automatically from a remote control input or as programmed entry
using a calendar event. Additionally, and only as advanced method, can be performed remote message activation, requiring only
the connection to a local area network or LAN (Ethernet).
The audio content (music or messages / alerts / sounds) that the device plays is located by default in a SDCARD HC type (high
capacity) on the rear panel. This card must be formatted with FAT32 file system and must include the following directory structure:
It included music tracks or songs in MP3 format (ID3 info will be appreciated).
This folder should include the sounds, alarms, etc. …, in WAV format.
Included in this folder, voice messages in WAV format.
It's a system folder that should be no modified by the user, due to
include the file, base of all programming and configuration of GD-36.
To facilitate user to change the background music which content is most sensitive to changes,
has enabled a USB 2.0 port on the front of GD-36. Just insert a USB flash memory, formatted
under the FAT32 file system, and copy the music in a folder called MUSIC hanging from the tree
root directory of the related drive. It is required to turning off the GD-36 before inserting the
USB memory; once turn on again, the USB memory contents will be examined and if they are
music files, these will be selected to be played when the user wishes.
NOTAS:
It is highly recommended not to connect or disconnect the USB sticks with the GD36 device in operation, to prevent failure and
damage it.
GD-36 required for a proper operation that the audio directories containt at least a correct file, ie a “.mp3” track on the “MUSIC”
folder, a “.wav” file on the “VOICE” folder and a “.wav” file on the “SOUND” folder.
4.1. DigitalAudio Storage.
• MUSIC.
• SOUND.
• VOICE.
• SETTINGS.
settings.bin
It's recommended to format the SD Cards with the or upper tool, freely available on
https://www.sdcard.org/consumers/formatter_3/eula, instead of included in most common OS in order to assure the compatibility with all market
cards.
SDFormatter V3
GD-36
6
The Webserver built-in requires to have already installed the Adobe Flash Player plug-in on the Internet Explorer used by the customer
(See paragraph 5. WEBSERVER).
The FTPServer installed on Gd36 requires of an standard ftp client working prompt the prompt system. This kind of client is included on
the more usual OS (Windows includes ftp.exe).
6
7
8
610.396A 28
-
1.Clock/Calendar.
2. Logo.
3. Status Line.
4. Track or Message title or filename.
5. Playing mode.
6. Playing time.
7. Percentage progress.
8. Graphic progress bar.
9. Time to next Calendar Event.
Always shows the current time and date. Remember that you must set it before you start using any timer function if it malfunctions
can occur, and revise it periodically.
Advertising logo of Unión de Desarrollos Electrónicos, S.A.
This line displays information related to the operation of the device at all times, as may be: STTOPING…, PAUSE, PLAYING
MUSIC, PLAYING MESSAGE, PLAYING CALENDAR, SUPERVISED, etc.
In this area will be displayed the title of the song (get from the ID3 tag included in the majority of the MP3 files, if this information is
included in the file), or the filename MP3 or WAV. If the filename or title is longer than the screen, the information will be displayed in
roll mode.
The playing mode is always set as REPEAT, but can be set as: NORMAL or RANDOM. The first is a sequential playback of the
songs found in the "MUSIC" folder on the SDCARD or USB drive, while the second one will play the songs in random order, in order
not to repeat songs and make the most entertaining and diverse listen to the customer.
To switch from one mode or another, simply press the " " while is playing a music file.Additionally, if you press the " “, GD-36 will
change to the next song. The other navigator keys have no function assigned on the media player.
But, additionally in this area can be show other information as "Mess" (Message activate from MENU), "ExtM" (Message activated
externally) or "CalM" (Message activated from Calendar).
In this area will be displayed the playing time of the current track or message, in the reduced time format (mm:ss).
In this area will be displayed numerically the percentage (%) of the current track or message played.
In this area will be displayed graphically the percentage of the current tack or message played.
In case of scheduled events planned with an activation of less than 1 year from the current date, they will be added to a list and
displayed in this area will be given the time remaining until the next scheduled event and its associated program number .
4.2. Screen information.
The basic screen we find in the GD-36 is detailed below.
1.
2.
3.
4
- Clock / Calendar.
- Logo.
- Status line.
.- Track or Message title.
5.-
6.-
7.-
8.-
9.-
Playing Mode.
Playing Time.
Percentage progress.
Graphic progress bar.
Time to next Calendar event.
12:03:55
GD-36
7
1 2
6
7
9
3
4
5
8
610.396A
PLAYING MUSIQUE
28
-
4.4. Operating indicator lights (LED).
4.5. Turn ON/OFF the unit.
The unit has in the front panel just a few lights that give us the following information:
It indicates if unit is operating (GREEN) or off (RED).
When lit (RED) indicates general failure condition of the unit or degradation of the audio files supervised (Security
installations). This indication is related to the FAULT open contact condition on the rear side.
When lit (RED) indicates active music playback mode.
When lit (RED) indicates active message/calendar playback mode.
When lit (RED) indicates the recording mode is active and the user can record a new message.
The equipment has been designed to support the continued operation, but in certain situations may require disconnection. This
should be kept the "OK" button down for few seconds and then released it; just at this moment the unit will shut down to low power
mode.At that time the STANDBY LED (RED) lights indicating that the unit has gone to standby mode.
To turn on the unit again just hold down the "OK" several seconds and then release it. At that point the STANDBY LED turns off
and the ON LED lights ON (GREEN) and the display shows the starting process information. After few initialization seconds, the
unit is fully operative.
The display automatically goes into shutdown mode after several minutes of inactivity (no user operation), but the unit is in
a fully operational state. In this condition the ON LED remains lit. Pressing any key on the front panel, or if is detected any external
or scheduled event, the display is automatically turn on to show the new device state.
1. STANDBY/ON.
2. FAULT.
3. MUSIC ON.
4. MESSAGE ON.
5. REC ON.
NOTE:
5. BASIC SETUP.
To enter in the setup mode is necessary that player was paused or stopped, then press
MENU to enter in the MAIN MENU.
Within the MAIN MENU there are functions that can be executed by any user, but there
are other that request a Password to access to advance features. These latter are
accessed after selecting the "Service Menu".
Use the cursor keys to select the desired option and confirm with OK, or at any time
using the BACK key can return to the main screen.
Use the cursor kys to select the desired option and OK to confirm, but using the BACK
key to come back to the main screen.
4.3. Keyboard.
IMPORTANT:
To manage the behavior of the device, it features a navigator keypad comprising 4 arrow keys (up, down, left and right) plus a
validation key (OK), and additionally to use the basic functions, have been provided to the GD -36 of 4 shortcut keys (MENU,
BACK, PLAY / PAUSE, STOP), all in the front panel.
The PLAY/PAUSE shortcut key affects only the music playback function, while the STOP button affects to all playback functions.
In the case of supervised messages, pressing the STOP button during the playing time, the system will require cancellation
confirmation before stopping it, by the introduction of the supervisor password (Level 2).After entering it, the supervised message
will be canceled immediately, without waiting to reach the end.
For more details please go to 6.2. Supervised Messages.
GD-36
8610.396A
MAIN MENU
Message List >
Music List >
Program List >
Language >
Adjustments >
Service menu >
28
-
1. "MENU"
2.
3. OK
4.
5.
6. OK BACK
7. MESSAGE ON
8. STOP
Press to enter in the "MAIN MENU".
Press " " to select the "Message List" option.
Press " " to open the message selection screens.
The 1/XX screen appears (where XX is total number of available pages).
Select the desired message using the " " o " " keys. Pressing these keys in the
most extreme positions forward or back one page.
Press " " to play the message selected on the screen or press " " to come
back at "MAIN MENU".
The display switches to playback mode and the LED becomes ON.
The message will be played repeatedly until you press " ". In that case, the
message will continue until the end of it, being at that time off, returning to the previous
state of the music player.
5.1. Message list.
At any time the user can select one of the existing messages in the SDCARD and activate it. These include the TM output is closed
for the duration of any message, to indicate message priority issue and manage external public address (PA) system.
Follow these steps to understand how to select a message from the list.
5.2. Music List.
In the BGM or Music Player mode, the next track can be selected from a music track list
following the next steps.
Press to enter in the "MAIN MENU".
Press " " to select the "Music List" option.
Press " " to open the music track selection screens.
The 1/XX screen appears (where XX is total number of available pages).
Select the desired music track using the " " o " " keys. Pressing these keys in the
most extreme positions forward or back one page.
Press " " to play the music track selected on the screen, or press " " to come
back at "MAIN MENU".
The display switches to playback mode and the LED becomes ON.
The song plays up to its end, at which selects the next track if the player is working on
NORMAL mode, or is selected on aletoria form if the player is working in RANDOM
mode.
At any time the player can be stopped by pressing or
1. "MENU"
2.
3. OK
4.
5.
6. OK BACK
7. MUSIC ON
8.
9. STOP PAUSE.
NOTE:
Both the list of songs and while playing them on the screen will be use the name included on the ID3 Tag Song Title, if available,
otherwise it will select the disk filename. If the filename or title is longer than the screen, the information will be displayed in roll
mode. For more details about playing modes or keyboard, see paragraph 2.2.5 Playing Mode.
GD-36
9610.396A
Songs 1/XX
0.Yeah
1.Burn
2.If I aint got you
3.This love
4.The Way You Mov
5.My bre~1.mp3
6.Last song Home.mp3
12:03:55
PLAY MESSAGE
Deal of the day.wav
PLAYING MUSIC
28
-
5.3. Program List.
At any time the user can select one of the 100 programs in the SDCARD and activate it. This feature allows you to verify any
program created independently of the condition of predetermined schedule, but also lets you run programs that have not been
linked to calendar events, and can provide voice output with preset remote control outputs. Also include external contact TM, will
also be closed auxiliary contacts for remote (TL1 to TL10) if you previously had been included in the program
This feature allows you to verify any program created independently of the condition of predetermined schedule, but also lets you
run programs that have not been linked to calendar events, and can provide voice output with preset remote control outputs.
Finally comment that the programs do not support repetition, after finishing the program automatically goes to the music player
mode.
Follow these steps to understand how to select a program from the list.
(see section 6.4.6.
Calendar Events Setup).
5.4. Language selection.
The user can select the language of the text that appears on the screen from the "MAIN MENU" following the next sequence.
22:00:00
1. "MENU"
2.
3. OK
4.
5.
6. OK "BACK"
7. MESSAGE ON
Press to enter in the "MAIN MENU".
Press " " to select the "Program List" option.
Press " " to open the Program selection screens.
The 1/XX screen appears (where XX is total number of available pages).
Select the desired message using the " " o " " keys. Pressing these keys in
the most extreme positions forward or back one page.
Press " " to execute the program selected on the screen or press to
come back at "MAIN MENU".
The display switches to playback mode and the LED becomes
ON. The message will be played only one time, returning to the previous state of the
music player once finished it.
8. The program can not be cancel once has been activated.
1. Press to enter in the "MAIN MENU".
2. Press " " to select the "Language" option.
3. Press to open the Language selection screens.
4. Select the desired language using the " " o " " keys.
5. Press to select the language marked on the screen. Notice how the text
labels have changed to display on the selected language.
6. Press key to come back at "MAIN MENU".
"MENU"
"OK"
"OK"
"BACK"
GD-36
10610.396A
Programs 1/XX
Program 0
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Idioma
English
Francais
Espanol V
Calendar
Closing store.wav
28
-
5.5.1. Contrast Adjustment.
The user must select the contrast of the LCD screen to improve readability of the
characters depending on the ambient lighting on the work environment. To adjust
the contrast should follow the following sequence.
1. Press to enter in the "MAIN MENU".
2. Press " " to select the "Adjustments" option.
3. Press to open the Adjustments selection screens.
4. Press " " to select the "Contrast" option.
5. Press to open the Contrast adjustment screen.
6. Select the desired contrast level using the " " o " " keys, in order to see as
clearly as possible and with vivid colors, both the text and the bar graph.
7. Press to fix the selected contrast, or press, to cancel the
adjustment and come back at "MAIN MENU" holding the original contrast setting.
"MENU"
"OK"
"OK"
"OK" "BACK"
1. Press to enter in the "MAIN MENU".
2. Press " " to select the "Adjustments" option.
3. Press to open the Adjustments selection screens.
4. Press " " to select the "Volume" option.
5. Press to open the Volume adjustment screen.
6. “ “ or “ “
7. Press to fix the selected volume, or press, to cancel the
adjustment and come back at "MAIN MENU" holding the original volume setting.
"MENU"
"OK"
"OK"
"OK" "BACK"
Select the desired level using .
5.5.2. Volume Adjustment.
The user must select the volume level according to the existing installation using the following sequence.
5.5. Adjustments.
The user can select some basic adjustments, as Sound (Volume) or Screen (Contrast).
GD-36
11610.396A
Adjustments
Contrast
Volume
Adjustments
Contrast
Volume
Screen settings
Audio settings
28
-
6.1. Supervisor Setup.
Within the "Service Menu" select "Supervisor" and enter the Access Code Level 2,
designed to enable advanced security features.
The default SupervisorAccess is This password can be changed executing the
tool "New Password" on the Supervisor menu. Note that this password will be restored
to the default whenever you run the utility restore "Factory Reset" in the Supervisor
menu.
NOTA:
"1111".
4. To change to other digits, please use the " " o " " keys. To validate the
password press "OK".
5. If the password is correct, then the "Service Menu" appears.
6. If the screen shows the " ", please enter the password again.
The default password is This password can be changed from the utility
"New password", following the same steps used with "ENTER PASSWORD".
• Note that this key will be restored to the default whenever you run the utility restore
"Factory defaults".
Wrong password
NOTES:
• "1234".
6. ADVANCED SETUP.
To access the advance settings you must enter a Level 1 access PASSWORD from the "MAIN MENU".
1. Press " " to select the input data line.
2. Press "OK" to activate the input password mode.
3. The "[0]***" will appear on the screen, indicating that the first digit can be selected
with the " " o " " keys.
GD-36
12
How restore the Factory Values (or default):
1.
2.
3.
4.
5.
Press " " to select the option line.
Press "OK" to activate the input mode.
The "[No]" will appear on the screen, indicating that this option can be changed.
Select "[Yes]", using the " " o " " keys, and press "OK" to execute the
restoring to factory default.
After pressing OK, the device reset itself automatically to get new data.
610.396A
Service menu
Enter Password
****
Wrong password
Service menu
New password
Adjustments >
Supervisor >
Factory Reset >
Menu de servicio
Nueva Clave
****
Factory Reset
All settings will
be lost.
Are you sure?
No
Supervisor
New Password >
Messages >
Inhibition input
Disabled
Factory Reset >
28
-
6.3. Inhibition input.
The selection of the Supervised Messages will be deleted if you run the utility "Factory Reset" on the Supervisor Menu only,
but will not be altered or disabled, if you run the same utility "Factory Reset" from the Service Menu.
To enable the "INHibition" function follows the next steps.
1.
2. "OK"
3.
4. "OK"
NOTE:
"6.4.4 Messages Setup".
Press " " to select the Inhibition input selection box.
Press to activate the edit mode.
It will appear "[Disabled]" indicating you can change this option.
Select "[Enabled]", using the " " o " " keys, and press to fix the new value.
The activation mode of the Inhibition input can be by open contact or by closed contact.
This selecton is common to the selected for the rest of the external inputs (IN1 to IN10).
For more details see paragraph
6.2. Supervised Messages.
It is possible to select up to 2 messages to be constantly monitored to detect degradation and alert the security system by
activating the FAULT signal, opening the FAULT contact in the rear panel. The monitoring function works continuously in the
background after activation.
For activation select "Messages" and click in the Supervisor menu. Then the following screen message selection
appears. Follow the next steps to select some Supervisor message.
"OK"
1.
2. "OK"
3.
4.
5.
6. "BACK"
Press " " or " " to select the desired supervised message, 1 or 2.
Press to activate the audio filename selection list.
Press " " or " " to select the audio message from the list.
Press "OK" to fix the audio message.
The system will take time to analyze the contents of the selected file and enable file
supervision, during which time the MESSAGE LED on the front panel keep blinking and
the keyboard is not operational. Please wait until the LED turns off and the system
resumes normal operation mode.
Press to come back to the Supervisor menu.
NOTES:
• The selection of monitored messages will be deleted if you run the utility "Factory Settings" Supervisor Menu only within, but not
be altered or disabled, if you run the same utility "Factory Settings" from the Service Menu.
6.4. SystemAdjustments.
To set some system parameters, select "Adjustments" option on the Service Menu and
press
Then, the SystemAdjustments screen will appear.
"OK".
GD-36
13610.396A
Messages
Supervised 1
1.[evacuation.wav]
Supervised 2
Disabled
Adjustments
Ethernet >
Rec >
Time and Date >
Remote Events >
Calendar Events >
• To stop the playback of a supervised message must be press the " " button on
the front panel and then enter the " " (Password Level 2) using
the navigation keyboard (" " or " " to change value, " " or " “ to change the digit,
and "OK" to validate). Just in case the password was accepted the playback of the
supervised message will be canceled. In case the password was not accepted, type
the password again and repeat the process. If you don't know the right password, click
on " " to abort the cancelation and return to the normal screen mode.
STOP
Supervisor Password
BACK
22:00:00
Enter Password
28
-
2. RJ-45 cross-type or "Crossover Cable". It's used to connect the GD-36 directly to any computer with a free Ethernet
RJ-45 socket, from the GD-36 ( ) connector. This wire can be shielded.
4.4.1. Ethernet Setup (Remote Access).
The GD-36 can be connected to the local network (LAN) using two kinds of cables, depending of the device which you link it,
viz.
It's used when the GD-36 is connected to a router/switch/hub or to a DSL modem/router, already
installed and that are working as Gateways.
This cable will be inserted on the connector ( ), available on the rear panel of GD-36. The other cable side, to any free
Ethernet port socket on the router.
1. RJ-45 or "Patch Cable".
OK
MUSIC MESSAGE REC MICFAULT USB
GD-36
MENU
ON
OK
MUSIC MESSAGE REC MICFAULT USB
GD-36
MENU
ON
1 2 3 4 5 6 7 8
CONECTOR
RJ45
12
3
4
56
78
12
3
4
56
78
1 2 3 4 5 6 7 8
CONECTOR
RJ45
BLUE
BLUE-WHITE
BLUE
BLUE-WHITE
BROWN
BROWN-WHITE
BROWN
BROWN-WHITE
GREEN-WHITE
GREENGREEN
GREEN-WHITE
ORANGE
ORANGE-WHITEORANGE-WHITE
ORANGE
Cable RJ-45 (Patch cable)
1 2 3 4 5 6 7 8
CONECTOR
RJ45
12
3
4
56
78
12
3
4
56
78
1 2 3 4 5 6 7 8
CONECTOR
RJ45
BLUE
BLUE-WHITE
BLUE
BLUE-WHITE BROWN
BROWN-WHITE
BROWN
BROWN-WHITE
GREEN
GREEN-WHITE
GREEN
GREEN-WHITE
ORANGE
ORANGE-WHITE
ORANGE-WHITE
ORANGE
Cable RJ-45 cruzado (Crossover cable)
Cable RJ-45
Cable RJ-45 cruzado
GD-36
14610.396A 28
-
6.4.1.1. Local Network Setup (IPMode).
When the GD-36 is connected to a router (Gateway), the default Local Network (IP) must beAUTO. This configuration is based on
the allocation of network address automatically, following the standard protocol DHCP, each time a new item you want to connect
to the network. This is the easy way configuration (valid for most installations) and does not need to consult with your local
network administrator.Always can be verified the linking parameters with the router by pressing "OK" on the "AutoIP Data" option
on IP Mode menu.
In complex systems, the network administrator can force to use a specific IP address, landline calls, for each of the teams that
want to connect to it. In this case, the GD-36 should be set in "MANUAL". You should also use the "manual" mode, when you want
GD-36 connect directly to a computer using a crossover cable or "CrossOver Type" (See Section 6.4.1 Ethernet Setup).
To activate the MANUALmode, please follow the next steps:
1.
2. "OK"
3.
4. "OK"
5. "OK".
6.
7.
8.
9. "OK".
10.
11. BACK
Press " " to select the IP Mode option.
Press to enter in the IP Mode edit mode.
The "[Auto]" will appear on the screen, indicating this option can be changed.
Select "[Manual]", using the " " or " " keys, and press to fix it.
Select "Configure" option and press
Then, the "Manual IP 1/2" menu will appear.
Select the parameter to set using the " " or " ", and press "OK" to activate the
edit mode.
Change data values using the " " or " " keys and move to the next parameter
using the " " o " " keys.
Finally fix the desired values with the
Pressing " " or " " keys in the most extreme positions forward or back one
page.
When all parameters have been set properly, press to come back to the
IP Mode menu. Sometimes is required to reboot the device (GD-36) and the router
in order that changes will take effect.
GD-36
15610.396A 28
-
6.4.2. Recording Messages.
The GD-36 can record messages using the integrated microphone on the front panel. The recording menu is included on the
"Service Menu". To access it press over the "Rec" option.
The filename is create automatically every time the REC utility is called. The used auto format match with the
mask, where:
Year (short format).
Month.
Day.
Order number (Valid from 00 to 99).
To start a recording session, please follow the next steps.
"OK"
"YYMMDDXX.wav"
YY:
MM:
DD:
XX:
1. Press " " to select the "Rec" option.
2. Press to start the recording session.
3. The recording session starts when change "Rec" to "Stop". At the same time the
REC LED on the front panel and the Rec timer become ON.
4. To stop the recording session, simply press on the "Stop" line. At that time the
REC LED will turn off and the REC timer will stop, so the "Stop" will be changed to
"Play".
5. To check the recording quality the should be press on the "Play" line and wait
until the message ends.
6. Press key to exit from the Rec menu discarding the current audio data
captured and erasing the data file.
7. Press over the "Save" line to validate the recording session and save the data
file on the "VOICE" folder of the SDCARD. After complete this action, the system exits
from the Rec mode automatically.
It's not allowed the message recording while the system (GD-36) is in the "Fault"
condition.
"OK"
"OK"
"OK"
"BACK"
"OK"
NOTE:
GD-36
16610.396A
Rec
File name
11081100.wav
Rec Time
00:00
Rec
Rec
File name
11081100.wav
Rec Time
00:00
Stop
Rec
File name
11081100.wav
Rec Time
00:00
Play
Save
28
-
6.4.3. Clock and Date Setup.
The clock/calendar must be adjusted on some occasions, eg, after changing the lithium battery that power it, or when during the
initial installation, and keeps on time when mains and secondary power supplies fail.
To adjust time/date, please follow the next steps.
1.
2.
3.
4.
5.
6.
7.
8.
Press " " to select the Time option.
Press "OK" to activate the Time edit mode.
The "[2]3:10:00" appears indicating that the first digit of the hours can be set
using the " " or " " keys.
To change to other digits, please use the " " o " " keys. To validate the Time
press "OK".
Press " " to select the Date option.
The "[0]8/03/12" appears indicating that the first digit of the day of month can be
selected using the " " or " " keys.
To change to other digits, please use the " " o " " keys. To validate the Date
press "OK". After validate the date, automatically the weekday will be updated.
Press " “ to go to the selection of the Daylight Saving mode (See section
5.2.1 for details).
Press "OK" to activate edit mode Daylight Savings Time (Summertime).
In the screen will appear "[2AM3AM]" indicating that you can change the
default option.
Select the desired value using " " o " “ from the options below and click
"OK" to exit of the edit mode.
If you select "Others" and press "OK" will display more options in the menu to
specify the parameters "Start Date" and "Start Time", "End Date" and "End
Time" using the keys and the usual process.
9.
10.
11.
OFF 2AM3AM 1AM2AM OTHERS
6.4.4. Messages Setup (remote input activation).
The messages setup has as options the next ones:
• Activation Mode.
• Priority Type.
X
0
It's selected how the external inputs will be attendant (IN1 to IN10
and INHibition), if by Open or Close contact.
It's selected how the system will manage the priorities between all
inputs, by geographical mode (IN1 > IN2 >…> IN10), or by numerical type (1 to 10,
where 1 is more prioritary than 2, 2 more than 3 and so on, and 0 is disabled).
For every remote in (IN1 a IN10) is possible to set some parameters as follows:
- Audio file name (.wav).
- Priority Level.
- Activation by EDGE (push-button) or by LEVEL (switch). In EDGE mode, the
message will be broadcasted only once, whereas in LEVEL mode, the message will
be repeated continuously as long as activated the associated remote input.
- Auxiliary Outputs that will be turn on meanwhile the audio file is played. Note that,
* : Enabled Output.
* : Disabled Output
GD-36
17610.396A
Messages
Activation Mode
Close Contact
Priority Type
Geographical
Remote In >
28
-
6.4.5. Setup of Remote Input Messages
1.
2. "OK"
3.
4. "OK"
5.
6. "OK"
7.
8. "OK"
9.
10. "OK"
11. "OK"
12.
"OK".
13.
"OK"
13.1.
[X] [0].
13.2.
13.3.
13.4.
"OK".
13.5.
14. "BACK"
Press " " to select the Activation Mode.
Press to enter in edit mode.
The "[Close Contact]" will appear indicating the Activation Mode option can be
changed using the " " or " "
keys.
Press to fix the activation mode.
Press " " to select the priority type.
Press to activate the edit mode.
The "[Geographical]" will appear indicating the Priority
Type option can be changed using the " " or " " keys.
Press to fix the Priority Type.
Press " " to select the Remote IN setup menu.
Press to enter in the Remote IN 1/2 setup menu.
Select the parameter to set using the " " or " " keys, and press to
activate the edit mode.
Use again the " " or " " keys to change the option of each adjustment, and
finally fix them with
During the setup of the Auxiliary Control Outputs, please select the line that
includes the desired output, using the " " or " " keys. Then press to enter
in the edit mode.
The output that can be modified appears between clasps "[" and "]",
as or
To change value, press " " or " ".
To select other output, press " " or " ".
To fix the selected values for the output includes in this selection line,
press
To modify the state of other outputs, please repeat from item 13.
Press to exit of the Remote In menu.
GD-36
18610.396A
Remote In 1/2
Remote In
1
File name
Alarma.wav
Priority Level
1
Remote In 2/2
Edge/Level
Edge
Aux. Control Output
1->[X] 2->0 3->0 4->0
5->0 6->X 7->0
8->0 9->0 10->X
28
-
6.4.6. Calendar Events Setup.
GD-36 supports management of up to 100 different programs, based on events related to the calendar. For each program it is
possible to control auxiliary outputs will be activated during playback, when it automatically switched to the message and the
repeat cadence in fractions of 5 minutes.
To program an event, please follow the next steps:
1. "OK"
2.
3. "OK"
4.
5.
"OK".
6.
7. "OK",
"OK"
"OK".
"OK".
8.
9. "OK"
10.
11. "OK"
12. "OK"
13.
"OK"
• Once.
• Daily.
• Weekly.
• Mon-Fri.
• Weekend.
• Days. "X",
"0".
• DirectPlay.
• Date-to-Date.
Select the "Calendar" option on the "Adjustment" menu and press to
activate it.
Press " " to select the program number to edit.
Press to enter in the Program number edit mode.
The "[0]0" will appear indicating that the first digit can be changed using the
" " or " " keys.
To change to other digits, please use the " " or " " keys. To validate the
Program press
Press " " or " " to select the auxiliary control output line to edit.
During the setup of the Auxiliary Control Outputs, once the edit mode has been activated by pressing should be
use the " " or " " keys to move from one output to the next one, and over the desired output. With the " " or " “
keys will be selected the desired state and will be fixed with To validate the changes on every line must be press
Press " " to move at next page (2/3).
Press to activate the selection of the Voice or Sound Audio File name
from a list of files.
Press " " or " " to select the desired message from the list.
Press to fix the current message (file name).
Press " " to select the Activation Mode option and to activate the
edit mode.
Press " " or " " to select one of the following Calendar modes, and then
press to fix it.
Off Once Daily Weekly MonFri Weekend DirectPlay Days Date to date.
The calendar is used to select the start and end of the event, and the repetition period of the message in units of 5 minutes.
The difference between modes is that calendar day or days are associated with the event, namely:
In this mode you specify a particular date.
Are set every day, ie Monday through Sunday.
You select a single day of the week, between Monday and Sunday.
You select a weekday, between Monday and Friday.
Saturday and Sunday is selected, and exclude the other days of the week.
In this mode you can choose any combination of days a week. Selected will remain on marked and
excluding the days marked with a
This mode is special and can associate a program number with a voice file and some auxiliary control
outputs, without specifying an actual event calendar, ie a day and time of activation. This will appear on the list of
programs and can be run from it, so always manual.
This mode allows you to specify the message playback between two specific dates (Start Date and
End Date) while in a slot (Start Time and Stop Time) and a repetition rate in fractions of 5 minutes.
GD-36
19610.396A
Calendar 1/3
Program
00
Aux. Control Output
1->X 2->0 3->0 4->0
5->0 6->X 7->0
8->0 9->0 10->X
28
-
7. WEBSERVER.
GD36 can be controlled and managed remotely by a web server included in the device, and run an application on
the remote client, or customer's computer.
If you have not installed the "Flash" plug-in in your usual web browser, it is possible that when you access the GD36, the same
browser asks you to install one. If none available, you can always download the latest version available for your particular type of
browser, completely free from the website of i ts creator Adobe. Below is a l ink to download:
.
Here's an example view of the webserver included on the GD36 using Microsoft's Internet Explorer 9 as browser (there may be
differences depending on the browser used, but can be used whatever technology compatible withAdobe Flash).
To activate the WEBSERVER simply open your web browser and type or the IP address associated with your device
GD-36 ( ) in the address bar and after few seconds a screen like the following one will appear.
Adobe Flash
http://get.adobe.com/es/flashplayer/
http://gd36,
eg http://192.168.0.200
The system takes seconds to update all the
parameters of the remote computer, and
during that time a waiting screen similar to
below will appear.
Depending of the selected mode some of the options can be not necessary to set.
Press " " or " " to select an option: Day, Start Time, Stop Time o Repeat
Period of the selected message.
Press to exit from Calendar menu.
14.
15. "BACK"
The system takes several seconds to update all the parameters of the remote
computer, and during this time waiting a screen similar to that shown below.
NOTES:
To erase any Program, it's only necessary to select the Program by their number on the "Calendar 1/3" screen, and change
the "Activation Mode" to "OFF". Automatically this program will disappear from the "Program List".
Try to be active and always consecutive messages starting with the first (PROGRAM 0).
It's very convenient to create backup copies of the "settings.bin" file, available on the
(\\SETTINGS) folder of the SD CARD. This file stores all the calendar and external input
configuration. This file should be use after formatting the SD Card or install a new one (damage,
loss, etc…) and allow us to recover easily all the correct event programs.
GD-36
20610.396A 28
-
7.1. System Status.
The Webserver has a homepage that is what we call "System Status". This page allows you to monitor the status of the remote
GD36, but also allows us to interact with it.
At monitoring level, allows us to display the status of the inputs (Remote) and outputs of the remote device, the status of the front
panel LEDs (FAULT, MESSAGE, MUSIC), we know the time to the next calendar event and the related program, and a simulated
screen of remote GD36. The areas of these operations are marked with an "M" in blue.
At controlling level, we can select the language of the information in the remote device's screen (English, French or Castilian). It
also can act on the remote audio player (PLAY / PAUSE, STOP, MODE, NEXT) and choose the song (MUSIC), message
(MESSAGE) or program (s) from a list and run by Play respective button. You can also change at any time the overall volume by
changing the VOLUME bar position. The areas of these operations are marked with a "C" in red.
NOTE:
To launch a new song, a new message or run a new program, is mandatory to stop the current playback by pressing
and then press the Play button on the area associated with the operation to perform.
"STOP",
NOTES:
For the browser displays correctly the GD36 App, the local network connection (Ethernet) should be pre-configured previously.
Review this manual to see how to perform this configuration (see Section 4.4.1 Ethernet Setup), and if in doubt please contact the
administrator of your local network.
• Note that to access to GD36 from the Internet (not required for local networks) there are several important considerations to
meet and also require of qualified staff to perform certain tasks:
• It is advisable to hire an IP fix service with our ADSL or Cable supplier, to ensure that the GD36 is always available at the same
external IP address. If you already have Internet service, but dynamic IP type, usually cheaper, it will be necessary to use any
outside company to lend us a dynamic DNS service. For more details, contact your network administrator.
• You must configure the IP GD36 in MANUAL mode and assign an IP address outside the range assigned by the gateway
(Gateway) of the system installation using DHCP. Please request to your LAN administrator a free IP address.
• It must be forwarded the external TCP ports (80, 1998 and 1999) to the internal TCP ports (80, 1998 and 1999), just to the IP fixed
manually with which we have previously configured the GD36. To perform this task will be necessary to contact your local network
administrator.
You can only view the correct results if you use a web browser that has enabled the use of technology, usually all
personal computers.Access from mobile phones is not guaranteed.
Depending on the data traffic on the local network or the contracted bandwidth, the download of data content from the
Webserver to the remote computer may slow down.
• Adobe Flash
•
M C
C C C
C
M
M
MM
GD-36
21610.396A 28
-
MUSIC LIST.
"MODE" "NEXT".
"PLAY"
PLAYING MUSIC
MESSAGE LIST.
PLAYING MESSAGE
PROGRAM LIST.
DirectPlay
SYSTEM LANGUAGE
English,
Francais Castilian
INPUTS (Remote Events)
The MUSIC play mode is always repetitive, but the song selection is random (RANDOM) or sequential (NORMAL). You can
switch between either modes by pressing the on the player. To jump to the next song just press the button To
select a song from the available, press DOWN (down) or UP (above) in section MUSIC LIST and when the title of the song is
desired, then click on the for. In a few moments you will see how the title of the selected song appears on the information
display; the player mode is set to " " and the playback progress bar, the play time and the % progress are
updated. When playing music, the MUSIC indicator is lit red.
The message mode is always repetitive, ie, once selecting a message using UP and DOWN from the list of voice messages or
sounds, and activated by pressing on Play, the message started and will be repeated continuously until canceled by pressing on
the STOP button. During the time that the message is playing, the screen displays the status as " ", the
name of the audio file, the progress bar and the respective percentage (%), as time played. During message playback, the
MESSAGE indicator will light red. Also TLM will light red, indicating that the TLM output will be active, while the current message
is playing.
The user can activate any program (00 to 99) that has been previously configured, using
the UP and DOWN on the PROGRAM LIST area. The list shows the number of selected
program and the total of programs stored in memory. When the text color is blue means
that the selected program has a special mode (Do not have an associated
real-time event, and can only be run manually from this list), however, for other modes the
text appears in Black.
Remotely can also be selected the local language of the GD36; simply select the language by clicking the radio buttons:
(French) or (Castellano or Spanish). The active option is shown highlighted in green. Once selection is done,
the changes take effect immediately.
Every time a remote input (1 to 10) or the special inhibition input is activated, the indicators IN1 to IN10 and INH will light up red,
indicating that this or these inputs are active. The input that GD36 decides to be processed, following the rules set forth in the
section on remote events, will be attended by activating the audio message and appropriate remote outputs, TL1 to TL10
(depending on programming) and additionally the TLM output.
POWER (ON/OFF)
The GD36 can be turned off and later on remotely turned on using the "POWER" button.
When the GD-36r is in standby mode, or low consumption, in the remote computer screen will
be shown "System in standby. Press power button".
"System in standby. Press power button".
GD-36
22610.396A 28
-
7.2 Service Menu.
The rest of the configuration options that GD36 includes should be handled only by
authorized staff and protected by a password. To access the "Service Menu" must enter
the 4 digit Maintenance Password on a screen like the following, which appears after
pressing the " " button.
It should be mentioned that once you enter the correct password, the system will not ask
for the key until you close the current session of Windows Explorer, that is, until you close
the tab or window containing the application GD36. If the entered password is incorrect
you will be informed by the text " ".
If the entered password was correct then you should see the options allowed by the menu.
. Adjust the system clock (day / hour) and the IP mode settings (auto /
manual).
. Create up to 100 programs, combining voice files and outputs with
dates and times related to the remote activation / stop of them.
. Allows you to associate voice files, activation modes and auxiliary
outputs, for each of the 10 available remote inputs.
. Change the Maintainance Key (level 1) for new one, also 4 digits.
. Retrieves all the default values to the GD36. Once the button
"Restore to default", GD36 is prompted the user to press "Enter".
.Adjust advanced settings of the device, as described below.
Service menu
Wrong Password
System Settings
Calendar events
Remote events
Change password
Restore to default
Supervisor menu
5.2.1. System Settings.
This menu is used to adjust the system clock and the configuration of the Ethernet connection, either in automatic mode or
manual mode.
To set the day and time enter the desired values on
the boxes and press the right
To adjust the connection settings to automatic
mode, ie, using the DHCP feature check the "
".
After pressing the button would change to green,
indicating the selected mode is Auto. The new
mode will take effect the next time the GD36 boot
up.
When manual mode is selected shall specify the
other parameters and press the
appropriate to save, if not enough information to
set properly the LAN parameters, i t 's
recommended to contact with the LAN
administrator (see section 6.4.1 Ethernet Setup).
"Enter".
Auto
IP Mode
"Enter"
GD-36
23610.396A 28
-
The full configuration screen of the calendar events can be seen on the
left, depending upon the activation mode is selected, one or more of the
fields / areas disappear.
It should be always specified a r, an audio file
( ) and an , using the " " and " " that
are placed to the right of each element. The other parameters are
optional.
Below are the different activation modes.
This program allows you to specify how a particular date (once) but also a
margin schedule that begins in "Start time" and ends with "Stop time" and
can repeat the message with the range marked by "Repeat Period"
(multiples 5 minutes).
Additionally, can be selected the outputs that will be activated while the
message is activated. To select an output, click on the text "Out” and the
associated LED will light green. You can activate any combination of
outputs. Remember that after modifying parameters associated with a
button "Enter", it must be pressed to send the request to change the
remote GD36, and also if you see the button "SAVE", remember to press
it to confirm the update request data on the remote device.
Program Numbe
FileName Activation Mode Up Down
ONCE.
7.2.2. Calendar Events.
NOTE:
"SAVE"
"SAVE"
Whenever you change system parameters requiring confirmation by the user, a button will appear in the
left menu area. If this button is not pressed, the data sent will not be updated correctly. The update completed
successfully when the disappears and the modified data still on the screen, if the saving is not completed
successfully, the data had been changed are refreshed with the original values. In that case repeat all the process.
The system clock mode allows automatic adjustment of the hour depending on DST
(Daylight Saving Time or Summertime). This time setting is produced in Spain and
most European countries at 2 o'clock on the morning of last Sunday in March, winning
one hour (2AM 3AM) and melts in the early hours of last Sunday in October, losing
the time previously won (3AM 2AM). To activate this feature simply select the
"AUTO 2AM-3AM" in the Summer Time Setup drop-down panel. There are countries
in Europe like United Kingdom for which the time change is different (1AM 2AM), or
other globally where they can change so much day as the start and end time; just for
them is planned the special mode "AUTO Others ...". It's mandatory for you after
updating the time parameters to desired ones to press the "ENTER" button to update
the internal data related on the GD36.
It is recommended to guarantee on the country of installation of GD-36, which of the 3
options is the most correct and verify the system once the set has been configured that
this is working properly.
Each time you change the Ethernet configuration you must restart the GD36 again for the changes
to take effect, either locally by pressing the " " on the front panel of the device, or remotely by
pressing the button " " present on the " " page.
OK
POWER System Status
GD-36
24610.396A 28
-
DAILY.
WEEKLY.
Mon-Fri (Working days)
Weekend
Days
This programming mode will be broadcast daily selected audio file
message in the time slot that starts at "Start time" and ends with "Stop
time" and may include repetitions of the message with the range marked
by "Repeat Period" (multiples of 5 minutes).
This programming mode is to set only the selected day in "
" will air on selected audio file message in the time slot that starts at
" " and ends with " " and may include repetitions of the
message with the range marked by " " (multiples of 5
minutes). To set a day of the week click on the desired day text and the
associated LED will light green.
This programming mode is fixed every working day (Monday to Friday) or
weekends (Saturday and Sunday) as choose " " or "Weekend",
will air the audio file message selected in the time slot that begins at
" " and ends with " " and may include repetitions of the
message with the range marked by " " (multiples of 5
minutes).
This programming mode is used to select any combination of days inside
the week. The days selected in " " area will air the
selected audio file message in the time slot that starts at " " and
ends with " " and may include repetitions of the message with
the range marked by " d" (multiples of 5 minutes).
To set a day of the week click on the desired day text and the associated
LED will light green. You can select as many as you want.
Repeat on
days
Start time Stop time
Repeat Period
Mon-Fri
Start time Stop time
Repeat Period
Repeat on days
Start time
Stop time
Repeat Perio
GD-36
25610.396A 28
-
This screen set common parameters for all remote inputs (IN1 to IN10
and INH), including:
: Choose between "Open contacts" or closed "Closed
Contacts".
: Select from Geographic (the highest priority is the IN1
and IN10 is lower), or numerically by Level (Priority 1 is the highest, 10 is
the lowest).
But you should also specify parameters for each of the inputs, such as the
audio file name ( ) and priority ( ). To select
appropriate values for these parameters use the right " " and " "
buttons. Additionally, you must specify for each input ( ), if
the event is triggered ( ) with an edge trigger (edge, or a
"push"), or by a change in level (Level, or a "switch ").
Do not forget to set the required outputs for each combination of remote
input and then press on " " when you want to authorize the updating
of data on your remote GD36.
Activation Mode
Priority Mode
FileName Priority Level
Up Down
Remote Input
Trigger Mode
SAVE
7.2.3. Remote Events.
GD-36
26610.396A
DirectPlay
Start time Stop Time Repeat Period
Date-to-Date
This mode is special and can associate a program number with a voice
file and some auxiliary control outputs, without specifying an actual event
calendar, ie, a day and time of activation. As the data entered in those
areas " ", " " and " " have no effect on
this type of program. This will appear on the list of programs and can be
run from it, so always manual.
This mode allows running programs between two dates in particular,
beginning the day "Start Date" and ending the day "End Date". The time
can also be selected within a time slot, beginning with "Start Time" and
ending with "End time", in this case should also activate the repetition
period on 5 minutes steps, changing "Repeat Period". If you want to run
only once a day the message then you should fixe at the same time "Start
time" and "End Time" and turns repeat setting on "Repeat Period
Minutes" to 0.
28
-
To access the advanced menu you must enter the Supervisor Special
key, normally different from the key maintenance or service.
It is a menu of advanced settings, which you can activate the
, which is normally associated with an external security key. If this
option is "Enabled", any change in the status of any remote control inputs
(IN1 to IN10) will have no effect on GD36.
Additionally you can activate the supervision of up to two audio files. To
enable monitoring of audio file by selecting it in the "
" or " ", using the corresponding
buttons " " and " ".
Inhibit
input
Supervised
message 1 Supervised message 2
Up Down
NOTES:
Restore
supervisor settings to default
It is recommended that if monitoring is not necessary to keep these boxes empty. When a supervised message is activated
pushing on the “ENTER” related button, the remote computer will take time to analyze the file and calculate the internal
supervision data; during this time, which basically depends on the size of file and usually are around a few minutes, the device
may respond slowly or temporarily stop working. During the waiting time LED on the screen is blinking in red color, indicating
system is working.Additionally, the MESSAGE indicator light located on the front of the GD-36 also will remain in blinking mode.
You can change the supervisor password by entering the new combination of 4 digits in the " " box and
validating the new data by clicking the respective button "Enter".
You can always recover the original condition or defect to the Supervisor mode, pressing the " " button in the
New supervisor password
Enter "
".
7.2.5. Supervisor Menu.
GD-36
27610.396A
After clicking on " ", a window will appear to enter the
new 4 digit password which will replace the previous one.
If you forget this password you can return to the default password " "
running the utility of " ", or reboot the device holding
down the " " key (release the key once appear characters on the
screen).
Change Password
1234
Restore Defaults
BACK
7.2.4. Change Password (LEVEL 1: Maintenance).
• To stop the playback of a supervised message is
necessary to press the "STOP" button on the
"Remote Control" area and then introduce the
"Supervisor Password" (Password Level 2). To
validate it is necessary to press the related "Send"
button. Just in case the password was accepted, the
playback of the supervised message will be
canceled. In case the password was not accepted,
type the password again and repeat the process. If
you don't know the right password, delete all
characters in the password box and press "Send" to
come back to the normal screen view.
28
-
GD-36
28610.396A
GD36 allows updating of files and data remotely, accessing to the built-in FTP server. To upgrade files, first of all is required to be
familiar with the FTP client available on your operating system (Windows includes software ftp.exe).
During the setup process will be asked about the server IP address or HOST, that is, the GD36 IP address. The address when
working inAUTO mode (DHCP) is \\gd36 or \\GD36 , or in MANUALmode 192.168.0.200 (or that you previously selected).
The FTP server is linked to 4 different users ( and ), matching with the destination folder
where uploaded the selected files, i.e. if you select the MUSIC user is for uploading MUSIC files in "mp3" format, but instead if we
select VOICE and SOUND users will be to upload voice or sound files in "wav" format, however the SETTINGS user will be to
upload data files in "bin" format.
The FTP server included in GD36 responds only to a limited number of commands and it may not be fully compatible with some
FTP clients available on the market. The use of FTP clients based on prompt line is really recommended. Here are the available
commands and a brief description of how to use them.
The FTP server included in GD36 responds only to a limited number of commands and it may not be fully compatible with some
FTP clients available on the market. The use of FTP clients based on prompt line is really recommended. Here are the available
commands and a brief description of how to use them.
(Close the connection without exiting from the FTP client).
(Close connection exiting from FTP application).
MUSIC, VOICE, SOUND SETTINGS
OPEN
USER
PASSWORD
PUT
CLOSE
QUIT
8. FTPSERVER
28
• On the right side is shown an example about the real update process of a
VOICE "wav" file related to the Welcome message (Welcome.wav). To do
this, you should open the command prompt command line in Windows ( ),
available in theAccessories menu, and follow the steps below.
• In case of error while entering the password, as shown in the figure below,
proceed to close the current user session VOICE, and open a new session
by repeating the whole process again.
• Because the GD36 server has a reduced number of functions, is not
allowed to delete, or list, or rename, or retrieve remote files.
• If the selected file already exists on the GD36 local folder, it will be
replaced without prompting the user previously.
NOTES:
It is strongly recommend when you are using the FTP server do not play any message or music with the GD-36, to prevent errors
during the upgrade. This will make the connection more faster too.
If you want to use the FTP server out from a LAN, you should redirect the external TCP port (20, 21) to the internal TCP ports (20,
21) with IP configured in the GD-36, also you should allow FTP traffic on your Firewall/Antivirus. To make this change, please
contact your local net administrator.
It is not possible to upload files with more than 8 characters excluding the 4 of the file extension (like .mp3, .wav or .bin). If you are
using MP3 music files, the GD-36 process the ID3 metadata and will be showed in the screen or website.
The GD-36 needs has to be restart in every upload data. You can switch off pressing 2 seconds the OK button on the frontal part
of the device, or by the console by the CLOSE and QUIT commands that will force to restart the GD-36 automatically, also if you
do not use the FTP server during 3 minutes the equipment will be forced to restart and the new data uploaded will be available.