GCS Product Overview - Programming Warranty
2
Product Data Global Control Solutions GC S P rogramm ing Warranty GLOBAL CONTROL SOLUTIONS warrants all system programming provided Global Control Solutions, to be free from defects in workmanship or operation for a period of ninety (90) days from the date of initial delivery or modem loading into the system. This is a CONDITIONAL warranty and requires a dedicated, voice grade telephone service, or availability of a fax or non- essential telephone line for use with a telephone sharing device, or an internet connection with the proper interface devices and software to accomodate remote communication with the syst em. THIS WARRANTY DOES NOT APPLY TO ANY SYSTEM or SYSTEMS NOT PROVIDED WITH THIS BASIC SERVICE. Global Control Solutions will not in any event be responsible f or any cost incurred in the installation or use of this service, including monthly charges. GLOBAL CONTROL SOLUTIONS will service all system programming during the warranty period, and will make any required modifications same. Any programming required due to physical modifications or additions will not be covered under this warranty, nor will Global Control Solutions assume responsibility for these change s under same. All programming provided as a result of these modifications will be provided at additional expense to the installation contractor or dealer. GLOBAL CONTROL SOLUTIONS assumes no responsibility, and will not assume liability for damage or repair to equipment, or consequential damages due to deficiencies in system operat ion or programming. Global Control Solutions will assume no liability for; (1) improper or unauthor ized modification; (2) software or firmware dama ge due to Acts of God; (3) software or firmware damage due to power or computer deficiencies ; (4) defects in mechanical equipment or design which restrict the syste ms ability to control. Purchasers rights under this warranty shall consist solely of requiring Global Control Solutions to make modifications to system programming to provide pro per system operation during the warrant y period. The giving of, or failure to give advice or recommendations by Global Control Solutions shall not constitute any warranty by, nor impose any liability of Global Control Solutions. The foregoing constitutes the sole and exclusive remedy of purchase and liability of Global Control Solutions and is in lieu of any and all other warranties, expressed, implied, or statutory as to merchantability, fitness for purpose applied, description, quality productiveness, or any other matter. IN NO EVENT SHALL GLOBAL CONTROL SOLUTIONS BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES, OR FOR DELAY IN PERFORMANCE OF THIS WARRANTY.
-
Upload
globalcontsolutions -
Category
Documents
-
view
217 -
download
0
Transcript of GCS Product Overview - Programming Warranty
8/7/2019 GCS Product Overview - Programming Warranty
http://slidepdf.com/reader/full/gcs-product-overview-programming-warranty 1/1
Produc t Da t aGlobal Control Solutions
GCS
Programm ing War ran ty
GLOBAL CONTROL SOLUTIONS warrants all system programming provided Global Control Solutions, to be free from defects inworkmanship or operation for a period of ninety (90) days from the date of initial delivery or modem loading into the system.
This is a CONDITIONAL warranty and requires a dedicated, voice grade telephone service, or availability of a fax or non-essential telephone line for use with a telephone sharing device, or an internet connection with the proper interface devices andsoftware to accomodate remote communication with the system. THIS WARRANTY DOES NOT APPLY TO ANY SYSTEM orSYSTEMS NOT PROVIDED WITH THIS BASIC SERVICE. Global Control Solutions will not in any event be responsible for anycost incurred in the installation or use of this service, including monthly charges.
GLOBAL CONTROL SOLUTIONS will service all system programming during the warranty period, and will make any requiredmodifications same. Any programming required due to physical modifications or additions will not be covered under thiswarranty, nor will Global Control Solutions assume responsibility for these changes under same. All programming provided as aresult of these modifications will be provided at additional expense to the installation contractor or dealer.
GLOBAL CONTROL SOLUTIONS assumes no responsibility, and will not assume liability for damage or repair to equipment, orconsequential damages due to deficiencies in system operation or programming. Global Control Solutions will assume no liabilityfor; (1) improper or unauthorized modification; (2) software or firmware damage due to Acts of God; (3) software or firmwaredamage due to power or computer deficiencies; (4) defects in mechanical equipment or design which restrict the systems abilityto control.
Purchasers rights under this warranty shall consist solely of requiring Global Control Solutions to make modifications to systemprogramming to provide proper system operation during the warranty period. The giving of, or failure to give advice orrecommendations by Global Control Solutions shall not constitute any warranty by, nor impose any liability of Global ControlSolutions. The foregoing constitutes the sole and exclusive remedy of purchase and liability of Global Control Solutions and is inlieu of any and all other warranties, expressed, implied, or statutory as to merchantability, fitness for purpose applied, description,quality productiveness, or any other matter.
IN NO EVENT SHALL GLOBAL CONTROL SOLUTIONS BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES, ORFOR DELAY IN PERFORMANCE OF THIS WARRANTY.
