G AT E WAY®

A R C H I T E C T U R A L L I G H T I N G

APPEARANCEPERFORMANCE ENDURANCE

2

GATEWAY ARCHITECTURAL LIGHTING

The Gateway Architectural Lighting Series offers a variety of styles designed to accentarchitectural settings and meet the needs of extreme environments. These fixtures offersuperior performance, provide uniform illumination, and improve visibility forcommercial and institutional public use facilities.

APPEARANCEStrong geometric elements on Gateway fixtures complement both interior and exterior buildingdesign. Available in round and oval shapes, Gateway provides four distinct bezel designs fora wide array of attractive looks to enhance the space.

PERFORMANCEThe versatile Gateway series accepts a large selection of lamp choices — compact fluorescentand H.I.D. — to provide uniform area illumination to improve visibility for safe and securepublic access.

ENDURANCEBuilt to a higher standard of strength and enclosure, Gateway fixtures use die-cast aluminumand injection molded polycarbonate enclosures to help withstand the effects of time. TheseGateway products carry a lifetime warranty:

Rough Service products by Lithonia Lighting are engineered to withstand extreme physicalassault. When properly installed per instructions for maximum vandal resistance, any RoughService lighting fixture utilizing a polycarbonate lens and/or polycarbonate housing enclosurethat is rendered inoperable as a result of physical abuse, will be repaired or replaced withoutcharge for the life of the product.

G AT E WAY®

A R C H I T E C T U R A L L I G H T I N G

3

Robust die-cast aluminum housing and bezel stand up to severe environments,and complement architecture.

Low-profile fixtures utilize energy saving compact fluorescent lamps andelectronic ballasts. Most models meet the requirements of The Americans WithDisabilities Act (ADA).

GATEWAY ARCHITECTURAL LIGHTING

4

Gateway series fixtures combine classic design and clean lines inround and oval shapes for either wall or ceiling mounting.

R O U N D S a n d O VA L S

5

Gateway fixtures offer aesthetics, lighting performance anddurability for interior or exterior applications.

VGR1

VGR2

VGR4

VGR5

VGO1

VGO2

VGO3

VGO4

VGO5

GATEWAY ARCHITECTURAL LIGHTING

76

The Gateway Architectural Lighting Series incorporates classic styling and rugged constructioncharacteristics to perform and survive in the toughest of environments.

Low profile backplates and deep housings are designed to mount over an outlet box. Deephousings also have threaded openings for conduit entry. For rough service installations, the useof four-hole mounting is recommended.

Die-cast aluminum bezels are available with either glass or polycarbonate lenses, and aresecured to the low profile backplate or deep housing with concealed fasteners. Lens gasketingand mounting pad gaskets help seal out dust, moisture and insects while cushioning againstimpact shock.

Polycarbonate lenses feature an integral perimeter channel for continuous "O" ring siliconegaskets. Borosilicate glass lenses are sealed by means of neoprene gaskets applied tobackplates or housings.

Finishes are electrostatically applied, thermally set, textured polyester powder coat to stand upto environmental effects. A virtually limitless color pallet provides the exact look for theapplication. See the Lithonia Lighting Architectural Colors brochure for specifications anddetails.

A broad selection of compact fluorescent lamps is available; lamps are included with fixture. These lamps feature (see details on page 11):

I High lumen outputI Low energy consumption (75% less than incandescent)I Excellent color rendering (CRI 82)I Instant-on, Instant restrikeI Low temperature starting 0°F (-18°C)I Long life (10,000 hours rated)

H.I.D. lamps - metal halide and high pressure sodium - are included with fixture. I All metal halide lamps incorporate ultraviolet (UV) shielding, reducing the emission

of harmful low level ultraviolet rays I H.I.D. lamps are ideal for extreme cold temperature starting -20°F (-30°C) to -40°

All Gateway fixtures are tested to validate design criteria and ensure maximum performanceunder the most rigorous conditions.

I Impact test, to stand up to extreme physical assaultI Dust chamber, to prevent ingress of dustI High pressure water jets, to prevent moisture ingress I Salt-fog chamber, to survive in corrosive atmospheresI Thermal, to perform in temperature extremesI Photometric, to provide rated light levels

Marine-grade die-cast aluminum bezelsprovide protection and secure lensenclosure. Torx® fasteners are recessedinto bezel for concealed appearance. 1 VGR4 bezel - DBLB (textured black)

Injection molded, UV stabilizedpolycarbonate lenses withstand extremeimpact, and feature integral gasketchannel for weather-tight seal.2 VGR polycarbonate lens with gasket

Tempered borosilicate glass lenses have atextured interior, a smooth exterior,and resist wear from weather andUV exposure.3 VGR glass lens

Backplates feature internalreflectors for smooth surfacebrightness, oversized neoprene padmounting gasket and polyester powdercoat finish for corrosion resistance. 4 VGR backplate with reflectors and 2/26DTT lamps

Housings are marine grade die-castaluminum, feature internal reflectors forhigh light output and are suitable formounting over outlet box or surfaceconduit entry.5 VGR C housing with H.I.D. reflector and lamp

P R O D U C T F e a t u r e s

1

2

3

4

5

GATEWAY ARCHITECTURAL LIGHTING

98

Bezel: One-piece, die-cast aluminum, marine grade alloy(<1% copper), .125 inch thick, encloses lens and securesto backplate with concealed stainless steel Torx® setscrews (two included) or optional stainless-steel tamper-resistant fasteners (see Options, page 11).

Backplate: 16-gauge steel backplate is post painted withblack polyester powder coat. Internal reflectors provideuniform surface brightness and maximum light output.Backplate features four-hole mounting pattern formaximum vandal resistance. Factory installed full padmounting gasket is closed-cell neoprene to seal againstmounting surface and help cushion against impact shock.

Housing: Die-cast aluminum, marine grade alloy (<1%copper) is .125 inch thick. H.I.D. reflector is semi-specularaluminum for uniform surface brightness and maximumlight output. Multi-lamp compact fluorescent reflectorassures smooth surface brightness and maximum lightoutput. Pad mounting gasket is closed-cell neoprene toseal against mounting surface and help cushion againstimpact shock.

Finish: Standard finish is textured polyester powder coat(see listing, page 11). For additional colors, consult theLithonia Lighting Architectural Colors brochure.

Polycarbonate lens: Translucent white, injection-molded UVstabilized lens is .125 inch thick. Smooth exterior allowsfor easy cleaning, and interior pattern diffuses light foreven surface illumination. Perimeter lens gasket is one-piece silicone "O" ring, retained in continuous lenschannel.

Glass lens: Tempered borosilicate glass is .250 inch thick,has smooth exterior for easy cleaning and diffuse texturedinterior surface. Perimeter lens gasket is continuous closed-cell neoprene.

Ballast: Fluorescent ballast is Class P, electronic, highpower factor, <10% THD, with starting temperature of 0°F(-18°C). Exception is 13W TT, electromagnetic ballast,normal power factor, 32°F (0°C) starting temperature,120 volt only. H.I.D. ballast is high reactance, high powerfactor, with starting temperature of -20°F (-30°C) for metalhalide, and -40° for high pressure sodium.

Socket: Fluorescent socket is high temperaturethermoplastic with integral lamp retention clip. H.I.D.socket is medium base porcelain with copper alloy, nickelplated screw shell and center contact. UL listed 660W,600V, 4kV pulse rated.

Lamp(s): All fixtures are furnished standard with lamp(s),unless otherwise specified (L/LP).

Listings: UL listed for wet locations. IP65 rated. CSA listedor NOM certified (see Options, page 11).

IP65 Rat ing: The International E l ec t ro t echn i ca lCommission (IEC) is an international standards body,much like the National Electrical ManufacturersAssociation (NEMA) in the U.S. IEC has established setrating standards and a labeling system to identify thedegree of protection that equipment possesses or providesagainst foreign elements. The degree of protection isdesignated by the letters "IP" (International Protection)followed by two characteristic numerals. The first numeraldesignates the degrees of protection against contact andforeign bodies, and the second numeral designates thedegrees of protection against ingress of water.

In "IP65" the first numeral (6) designates "Protectionagainst ingress of dust." [This is the highest ratingavailable.] The second numeral (5) designates "Protectionagainst jets of water." [Except for floodwater or beingimmersed in water, this is the highest rating used.]

MVOLT: Multi-volt electronic ballasts (for DTT and TRTlamps) operate on any line voltage from 120 to 277.These ballasts are also capable of powering multiple lamptypes (13W - 42W), and include programmed startingand lamp end-of-life detection. Single-lamp and two-lampmodels are available.

Torx® Fasteners: These tamper-resistant screws are used tosecure the Gateway series bezels to their respectivebackplate or housing. Two types are offered: standard isthe T10 recessed set screw (two are included with eachfixture). Optional is the TX20 buttonhead screw withcenter-pin reject for additional tamper resistance. Bothtypes are provided in stainless steel. NOTE: A uniqueTorx screwdriver is required for each respective type (seeAccessories, page 11).

Emergency Lighting: Deep housing compact fluorescent lamp(CFL) fixtures are available with an integral emergencybattery system, UL listed for wet locations, up to a 42WTRT lamp; 32°F (0°C) rating.

Integrity: Thorough and extensive testing of the Gatewayseries includes thermal, moisture, salt fog, photometricand impact resistance. These rigorous procedures andmeasurements allow Lithonia Lighting to stand behind ourRough Service Lifetime Warranty.

T E C H N I C A L S p e c i f i c a t i o n s

VGO1 32TRT WALL MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*

7' 8' 9' 10'

A 1.9 1.5 1.2 .97B 1.3 1.0 .80 .65C .65 .50 .40 .32D .32 .25 .20 .16

VGO2 32TRT WALL MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*7' 8' 9' 10'

A 2.4 1.9 1.5 1.2B 1.9 1.4 1.1 .92C .55 .36 .32 .28D .18 .13 .11 .10

VGR2 42TRT WALL MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*7' 8' 9' 10'

A 2.6 2.0 1.6 1.3B 1.3 1.0 .80 .65C .65 .50 .40 .32D .32 .25 .20 .16

VGO3C 50M WALL MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*

7' 8' 9' 10'

A 1.9 1.5 1.2 .97B 1.3 1.0 .80 .65C .65 .50 .40 .32D .32 .25 .20 .16

VGR1 2/26TRT CEILING MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*7' 8' 9' 10'

A 2.9 2.3 1.8 1.5B 1.5 1.1 .90 .73C .73 .56 .45 .36D .36 .28 .23 .18

VGR1 100M CEILING MOUNTHORIZONTAL PLANE ISO-CANDELA LINE*7' 8' 9' 10'

A 4.4 3.4 2.7 2.2B 2.2 1.7 1.3 1.1C 1.1 .84 .67 .54D .54 .42 .34 .27

P H O T O M E T R I C S

* Initial footcandles at mounting heights shown. Grid lines @ 1 mounting height.

10 11

GATEWAY ARCHITECTURAL LIGHTING

L A M P C o m p a t i b i l i t y O R D E R I N G I n f o r m a t i o n

Gateway series products are furnished standard with lamp(s).

TWIN-TUBE (TT) 2-pin lampsLamp Base Starting Temp. Average Life Initial Lumens CRI13TT GX23 32°F(0°C) 10,000 hrs. 825 82

DOUBLE TWIN-TUBE (DTT) 4-pin lampsLamp Base Starting Temp. Average Life Initial Lumens CRI13DTT G24q-1 0°F(-18°C) 10,000 hrs. 900 8218DTT G24q-2 0°F(-18°C) 10,000 hrs. 1,250 8226DTT G24q-3 0°F(-18°C) 10,000 hrs. 1,825 82

TRIPLE TWIN-TUBE (TRT) 4-pin lampsLamp Base Starting Temp. Average Life Initial Lumens CRI26TRT GX24q-3 0°F(-18°C) 10,000 hrs. 1,800 8232TRT GX24q-3 0°F(-18°C) 10,000 hrs. 2,400 8242TRT GX24q-4 0°F(-18°C) 10,000 hrs. 3,200 82

HIGH PRESSURE SODIUM (S)Lamp Base Starting Temp. Average Life Initial Lumens CRI50S Med./ED-17 -40°F(-40°C) 24,000+ hrs. 3,700 2270S Med./ED-17 -40°F(-40°C) 24,000+ hrs. 5,800 22

METAL HALIDE (M)Lamp Base Starting Temp. Average Life Initial Lumens CRI50M Med./ED-17 -20°F(-30°C) 10,000 hrs. 3,200 7070M Med./ED-17 -20°F(-30°C) 15,000 hrs. 4,700 75100M Med./ED-17 -20°F(-30°C) 15,000 hrs. 7,900 75

Based on Lithonia Lighting standard lamp offering, and lamp manufacturer’s published data.

VGR1 VGR2 VGR4 VGR5

VGO1 VGO2 VGO3 VGO4 VGO5

Series

RoundVGR1VGR1CVGR2VGR2CVGR4VGR4CVGR5VGR5C

OvalVGO1VGO1CVGO2VGO2CVGO3VGO3CVGO4VGO4CVGO5VGO5C

Lens

(blank) PolycarbonateGL Borosilicate

Glass

Voltage

120208240277347TB

MVOLT

Finish

Textured ColorsDWHG White

DBLB BlackDBNH Bronze

OptionalTextured Colors

DSPD Dark GrayDSPE GreenDSPF RustDSPG Dark RedDSPH Light RedDSPJ Light GrayDSST SandstoneDNAT Natural

Aluminum

See ArchitecturalColors Brochure foradditional colors andfinishes.

Dimensions: VGR - 14" Diameter x Max. 4.1" Deep VGO - 9" x 14" x Max. 4.1" DeepVGR-C - 14" Diameter x Max. 6.9" Deep VGO-C - 9" x 14" x Max. 6.9" Deep

Options

Shipped installed in fixtureEC Emergency circuit

(Incand - 25W Max.)ELDW Emergency lighting

(CFL - 42W Max.)GLR Internal fast-blow fusingGMF Internal slow-blow fusing

NL Night-light(Incand - 7W Max.)

DF Double fuse (208, 240)SF Single fuse

(120, 277, 347)PE Photoelectric cell

QRS Quartz restrike systemTRS Tamper-resistant screwsCSA CSA certified

NOM NOM certified

Refer to Product Selection Guideand individual specification sheets foroption compatibility, accessories andtechnical data.

Lamp

LPI Lamp included (standard)

L/LP Less lamp

Wattage

See Lamp Compatibility chart on page 10

TotalVGR1C VGR2C VGR4C VGR5C VGO1C VGO2C VGO3C VGO4C VGO5CWattage Lumens

50S 3700 I I I I I I I I I

50M 3200 I I I I I I I I I

70S 5800 I I I I

70M 4700 I I I I

100M 7900 I I I I

42TRT 3200 I I I I I I I I I

2/32TRT 4800 I I I I

2/42TRT 6400 I I I I

TotalVGR1 VGR2 VGR4 VGR5 VGO1 VGO2 VGO3 VGO4 VGO5Wattage Lumens

13TT 825 I I I I I I I I I

2/13TT 1650 I I I I

13DTT 900 I I I I I I I I I

2/13DTT 1800 I I I I

18DTT 1250 I I I I I I I I I

2/18DTT 2500 I I I I

26DTT 1825 I I I I I I I I I

2/26DTT 3650 I I I I

26TRT 1800 I I I I I I I I I

2/26TRT 3600 I I I I

32TRT 2400 I I I I I I I I I

42TRT 3200 I I I I

© 2003 Acuity Brands, Inc., 2/03 IR5587.qxd Form No. 803.15

Lithonia LightingAcuity Lighting Group, Inc.Rough ServiceOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-602-1531In Canada: 1100 50th Ave., Lachine, Quebec H8T 2V3www.lithonia.com

O t h e r A r c h i t e c t u r a l P r o d u c t s