Gasket Materials

36
Automotive Gaskets hi-performance 1 MLS (Multi Layer Steel) The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250 0 C or 482 0 F. The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. AFM (Aluminum Foam Material) Is the ideal gasket material for machined surfaces, especially when used between two uneven stamped surfaces that have been plated. AFM is a chemically blown, compounded nitrile synthetic rubber bonded to an aluminum core with temperature resistance of over 250 0 F. AFM material has an 85% recovery while maintaining strong torque retention. AFM does not require gasket sealers or silicone bead. Re-torque is not required. A vailable thickness: .018", .032", .045", .060" Gasket Materials The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion. A vailable thickness: .027", .030", .036", .040", .045", .051", .060", .065", .071", .074", .120" º CFM-20 A perforated steel core with an elastomer surface is ideal for head gaskets allowing heat to be drawn evenly across the gasket surface while providing maximum sealing characteristics when exposed to coolants and oils. A vailable thickness: .043", .051", .059" Spring Steel: A stainless steel core with a .001" thick coating of viton rubber on both sides. A vailable thickness: .010", .014”, .020"

Transcript of Gasket Materials

Page 1: Gasket Materials

AutomotiveGaskets

hi-performance

1

MLS (Multi Layer Steel)The Cometic MLS gasket is comprised of three layers of

Stainless Steel. Cometic uses Stainless steel for increasedstrength, it’s ability to rebound and corrosion resistance. Theouter layers of the gasket are embossed and coated on bothsides with a flouroelastomer rubber based material (Viton)designed to meet the demands of a variety of harsh sealingenvironments, load conditions and surface finishes. The Vitoncoating is heat resistant to 250

0C or 482

0F.

The center or shim layer of the gasket is comprised of anuncoated Stainless Steel layer, which can be varied toaccommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks andaluminum heads to aluminum blocks.

AFM (Aluminum Foam Material)Is the ideal gasket material for machined surfaces, especially

when used between two uneven stamped surfaces that havebeen plated. AFM is a chemically blown, compounded nitrilesynthetic rubber bonded to an aluminum core with temperatureresistance of over 250

0F. AFM material has an 85% recovery

while maintaining strong torque retention. AFM does not requiregasket sealers or silicone bead. Re-torque is not required.Available thickness: .018", .032", .045", .060"

Gasket Materials

The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. Nore-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing formeasurable reduced bore distortion.

Available thickness: .027", .030", .036", .040", .045", .051", .060", .065", .071", .074", .120" º

CFM-20A perforated steel core with an elastomer surface is ideal for headgaskets allowing heat to be drawn evenly across the gasket surfacewhile providing maximum sealing characteristics when exposed tocoolants and oils.Available thickness: .043", .051", .059"

Spring Steel:A stainless steel core with a .001" thick coating of viton rubber on both sides.

Available thickness: .010", .014”, .020"

B29064Pgs 1-3 10/14/04 12:50 PM Page 1

Page 2: Gasket Materials

AutomotiveGaskets

hi-performance

2

Aramid FiberIs a premium hi-temperature, hi-density creep resistant material that

requires no re-torquing and is fuel resistant. All Cometic fiber materialsare asbestos free and require no additional sealants.Available thickness: .012", .015", .020", .031", .039", .047", .060", .094",.125", .188"

Gasket Materials

Copper (Dead Soft)Available thickness: .005", .010", .016", .020", .027", .032",.043", .050", .063", .080", .094”

Armor CladIdeal for exhaust gasket applications. Can withstand temperatures up

to 20000F. Compressable to seal less than perfect sealing surfaces.Retains torque.Available thickness: .042", .064"

CUSTOM ORDER WORKSHEETPlease have this basic information ready and any other modifications that have been done to your specific application toensure quick and accurate delivery.

• "Actual" bore size of block: _______________• Desired thickness you will need to achieve proper deck clearance. ____________

(Refer to Gasket Materials for available thickness or visit www.cometic.com for online catalog).• What type of block are you using CAST IRON or ALUMINUM?• What type environment will the gasket be subject to?• What is your planned compression ratio? _____:_____ • Is your application naturally aspirated or forced induction?• If force inducted how much boost do you plan? ________• Do you have heads that require valve pockets in the gasket or round bore? If pocketed you must provide dimensions.• Is the chamber O.D. in the head larger than the bore?_________• If so, dimensions must be supplied: _________• Who is the manufacturer of the head:______________________• What is the part # and or model:__________________________• Who is the manufacturer of the Block: _____________________• What is part # and or model:_____________________________

HEAD GASKET VOLUME CALCULATOR (Round Bore Only)

Change Bore Dia. from in. to mm Bore Area Gasket Volume in cc’sBore (inches) = Bore Dia. (mm) x Bore Dia. (mm) x .7854 = Gasket Thickness (in) x Bore Area x 25.4 =cc’s

.03937 1000

B29064Pgs 1-3 10/14/04 12:50 PM Page 2

Page 3: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PriceAUSTINAUSTIN MINI 1300cc 73MM MLS .030 C4146-030 $83.95HEALY SPRIT 1000cc 67.5MM COPPER .043 C4145-043 $65.05

BMWMINI COOPER 1.6 LITRE 78.5MM MLS .027 C4308-027 $83.951966-78 1573 & 1773cc - M10 ENGINE 86MM MLS .051 C4292-051 $132.251972-88 1766 & 1990cc - M10B18/B20 ENGINE 90MM MLS .051 C4293-051 $132.251986-90 1990cc - S14B20/B23 ENGINE 93.4MM MLS .051 C4294-051 $132.25

94.5MM MLS .051 C4295-051 $132.25320i,520i 1989-98 2L, M50B20 82MM MLS .071 C4332-071 $199.45323i,325i,525i 1989-98 2.5/2.8L, M50B25/M52B28 85MM MLS .071 C4328-071 $199.45328i,528i,728i,Z3 1995-98M3(US) 1992-95 3.0L/3.2L, S50B30/S52B32 87MM MLS .071 C4329-071 $199.45M3,Z3(US) 1995-99318is,318ti,Z3 1989-98 1.8/1.9L, M42/M44 85MM MLS .060 C4348-060 $132.25

86MM MLS .060 C4349-060 $132.25320i,520i 1999-UP 2.2L, M54tuB22 81MM MLS .030 C4351-030 $157.45323i,523i 2.5L 1998-UP 2.5L M54tuB25 85MM MLS .030 C4352-030 $157.45328,528,728,Z3 2.8L 1998-UP 2.8L M54tuB28

COVENTRY CLIMAXFPF MOTOR 2.0 LITRE, DOHC FPF 82MM CFM-20 / .059 C4267-059 $84.00FWA, FWB & FWE ENGINE 1.1 LITRE,SOHC,FWA 74MM CFM-20 / .059 C4301-059 $76.60

1.2&1.5 LITRE, SOHC , FWB/E 78MM CFM-20 / .043 C4139-043 $76.602.0 LITRE, SOHC , FWA/B/E 80MM CFM-20 / .043 C4229-043 $76.60ALL FWA, FWB & FWE C4144 $76.60COMPLETE ENGINE KIT(Engine Gasket Kit without Head Gasket)

FIAT / LANCIAD50 4 CYLINDER 79MM CFM .059 C4131-059 $72.40D50 LONG BLOCK 4 CYLINDER-LONG BLOCK 79MM CFM .059 C4307-059 $72.40LANCIA DELTA 4 CYLINDER 85MM MLS .040 C4124-040 $83.95

FORD / LOTUS & COSWORTH ALL PUSHROD, CHAIN AND 4 CYLINDER 1.1-2.0 LITRE 82MM MLS .040 C4102-040 $83.95BELT DRIVEN BDA SERIES, CROSSFLOW AND 83MM MLS .040 C4103-040 $83.95

LOTUS TWIN CAM 83MM CFM-20 / .043 C4104-043 $72.4084MM MLS .040 C4140-040 $83.9584MM CFM-20 / .043 C4100-043 $72.4085MM MLS .040 C4133-040 $83.9586MM MLS .040 C4142-040 $83.9586MM CFM-20 / .043 C4141-043 $72.4087MM MLS .040 C4143-040 $83.95

25

C29064Pgs 4-31 10.12.04 3:00 PM Page 23

Page 4: Gasket Materials

Make / Model Engine Bore Material Part # List PriceFORD / LOTUS & COSWORTHBELT DRIVEN BDG “HP” STYLE GASKET 91MM MLS .040 C4316-040 $104.95GEAR DRIVEN FVA/FVC 4 VALVE 87MM MLS .040 C4138-040 $83.95

FVA/FVC 4 VALVE 88MM MLS .040 C4135-040 $83.95FVA/FVC ENGINE CASE KIT INCLUDES: C4271 $44.10REAR COVER, FRONT COVER, OIL PUMP, VALVE COVER, OIL PAN RAILS AND THERMOSTATGASKETSBDA SERIES DOHC 16V ENGINE C4174 $44.10CASE KIT INCLUDES: REAR COVER,OIL PUMP,INTAKETIMING COVER,VALVE COVER,OIL PAN,3 BOLT EXHAUST AND THERMOSTAT GASKETSPUSHROD 8V ENGINE CASE KIT C4270 $39.90INCLUDES: REAR COVER,OIL PUMP,TIMING COVER,VALVE COVER,OIL PAN AND THERMOSTAT

BDA EXHAUST GASKET SET 4-BOLT EXHAUST,4 PER SET AM .064 C4353-064 $14.703-BOLT EXHAUST,4 PER SET AM .064 C4354-064 $14.70

TWIN CAM EXHAUST SET 1.3" DIA. PORT, 4 PER SET AM .064 C4355-064 $6.831.6L SOHC EXHAUST PRE-CROSSFLOW CFM-20 / .051 C4356-051 $12.76

907 907 4 CYLINDER 98MM CFM-20 / .043 C4132-043 $72.40PUMA 1.7L ZETEC(MHA/B) ENGINE 83MM MLS .010 C4223-010 $52.45PINTO / YB 2 LITRE SOHC OHC,NEP ENGINE 92.5MM MLS .040 C4218-040 $88.15GRANADA,SIERRA,CAPRI, 2 LITRE YB DOHC GROUP A 92.5MM MLS .040 C4219-040 $132.30

HI-PERFORMANCE (HP)2 LITRE DOHC- STANDARD NON HP 92.5MM MLS .051 C4350-051 $88.15

ESCORT: 1970-89 YB ENGINE CASE KIT INCLUDES: C4248 $99.75THROTTLE BODY, FRONT COVER, PLENUM, OIL PAN, WASTE GATE, EXHAUST, TURBO DRAIN, INTAKE, VALVE COVER, WATERPUMP, THERMOSTAT AND WATER OUTLET GASKETS

HONDA / ACURACIVIC INTEGRA VTEC B16A, B16A, B17, B18C 81MM MLS .030 C4231-030 $83.95

81.5MM MLS .030 C4232-030 $83.9582MM MLS .030 C4168-030 $83.9583MM MLS .030 C4189-030 $83.9584MM MLS .030 C4188-030 $83.9585MM MLS .030 C4182-030 $83.95

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

26

C29064Pgs 4-31 10.12.04 3:00 PM Page 24

Page 5: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PriceHONDA / ACURACRX, CIVIC SOHC D15,D16 75.5MM MLS .030 C4251-030 $83.95

76MM MLS .030 C4195-030 $83.9577MM MLS .030 C4196-030 $83.9578MM MLS .030 C4167-030 $83.9579MM MLS .030 C4197-030 $83.95

INTEGRA DOHC,NON VTEC B18,A/B 81MM MLS .030 C4238-030 $83.9581.5MM MLS .030 C4239-030 $83.9582MM MLS .030 C4173-030 $83.9583MM MLS .030 C4181-030 $83.9584MM MLS .030 C4180-030 $83.9585MM MLS .030 C4175-030 $83.95

CRV B20 85MM MLS .030 C4250-030 $83.95PRELUDE VTEC(DOHC) H22A1/A2 (1992-96) 87MM MLS .030 C4255-030 $83.95

88MM MLS .030 C4198-030 $83.9589MM MLS .030 C4185-030 $83.95

PRELUDE VTEC(DOHC H22A4 (1997-UP) 87MM MLS .030 C4252-030 $83.9588MM MLS .030 C4253-030 $83.9589MM MLS .030 C4254-030 $83.95

HYBRID NON VTEC BLOCK B18 A/B, B20 BLOCKS WITH 81MM MLS .030 C4237-030 $83.95WITH VTEC HEADS B16A/B,B17,B18C HEADS 81.5MM MLS .030 C4236-030 $83.95

82MM MLS .030 C4191-030 $83.9583MM MLS .030 C4192-030 $83.9584MM MLS .030 C4193-030 $83.95

84.5MM MLS .030 C4241-030 $83.9585MM MLS .030 C4194-030 $83.95

86.5MM MLS .030 C4242-030 $83.95RSX TYPE-S,CIVIC TYPE-R K20A1/A2/A3, K24 86MM MLS .030 C4300-030 $83.95VTEC DOHC 2.0L 2001-UP 87MM MLS .030 C4311-030 $83.95

88MM MLS .030 C4312-030 $83.9589MM MLS .030 C4313-030 $83.95

NSX 3.0 & 3.2 LITRE V-6 DOHC 24V C30A1 95MM MLS .030 C4277-030 $94.45S2000 1999-UP 2.0L, DOHC VTEC, F20C1/C2 89MM MLS .030 C4335-030 $83.95

90MM MLS .030 C4336-030 $83.95

JAGUAR3.4 LITRE 6-CYL DOHC 83MM CFM-20 / .051 C4302-051 $115.50

83MM MLS .040 C4281-040 $147.0085MM CFM-20 / .051 C4304-051 $115.5085MM MLS .040 C4303-040 $147.00

3.8 LITRE 6-CYL DOHC 87MM CFM-20/ .051 C4305-051 $115.5088MM MLS .040 C4282-040 $147.0089MM CFM-20/ .051 C4125-051 $115.5089MM MLS .040 C4306-040 $147.00

27

C29064Pgs 4-31 10.12.04 3:00 PM Page 25

Page 6: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PriceJAGUAR

4.2 LITRE SERIES 1 1965-67 93MM CFM-20 / .051 C4338-051 $115.504.2 LITRE 1968-UP 93MM CFM-20 / .051 C4220-051 $115.504.2 LITRE HI-PERFORMANCE 1968-UP 3.670” MLS / .040 C4128-040 $288.754.2 LITRE HI-PERFORMANCE 1968-UP 3.690” MLS / .040 C4127-040 $288.753.4/3.8/EARLY4.2 LITRE ENGINE CASE C4265 $104.95KIT INCLUDES: BREATHER, INTAKE,OIL PAN, TIMING COVER, CAM COVER, THERMOSTAT AND WATERPUMPGASKETSLATE 4.2 LITRE ENGINE CASE KIT C4266 $88.20INCLUDES: BREATHER, INTAKE, OIL PAN, TIMING COVER, CAM COVER, THERMOSTAT AND WATERPUMP GASKETS

1971 - 93 5.3 LITRE V-12 (LEFT) 93MM CFM-20 / .059 C4330-059 $115.505.3 LITRE V-12 (LEFT) 97MM CFM-20 / .059 C4221-059 $115.505.3 LITRE V-12 (RIGHT) 93MM CFM-20 / .059 C4331-059 $115.505.3 LITRE V-12 (RIGHT) 97MM CFM-20 / .059 C4222-059 $115.50

XK8, XKR, S-TYPE 4.2 LITRE V-8 AJ33 ENGINE (RIGHT) 87MM MLS .030 C5770-030 $90.354.2 LITRE V-8 AJ33 ENGINE (LEFT) 87MM MLS .030 C5772-030 $90.354.2 LITRE V-8 AJ33 ENGINE (RIGHT) 93MM MLS .030 C5771-030 $90.354.2 LITRE V-8 AJ33 ENGINE (LEFT) 93MM MLS .030 C5773-030 $90.35

1971-93 V-12 (LEFT) 93MM CFM .059 C4330-059 $115.50V-12 (RIGHT) 93MM CFM .059 C4331-059 $115.50

LEXUSLS-400,SC-400,GS-400 1UZ-FE RIGHT 4 LITRE 92.5MM CFM-20 / .051 C4136-051 $72.401991-UP 1UZ-FE LEFT 92.5MM CFM-20 / .051 C4137-051 $72.40LX470 1998-UP 2UZ-FE RIGHT 4.7 LITRE 92MM MLS .040 C4357-040 $88.15

98MM MLS .040 C4211-040 $88.152UZ LEFT 92MM MLS .040 C4358-040 $88.15

98MM MLS .040 C4212-040 $88.15SC-300,GS-300, 2JZ-GE 3 LITRE 87MM MLS .051 C4276-051 $171.95SUPRA ‘93-UP

MAZDAMIATA 1.6 LTR -DOHC 16V,B6D MOTOR 80MM MLS .040 C4122-040 $94.45

MGMGA 1500/1600/1600MKII, SERIES B 74MM MLS .040 C4359-040 $83.95MGB 1.8L 18G/18GA 83MM MLS .040 C4147-040 $83.95MG MIDGET 1275CC- AUSTIN SERIES A 74MM MLS .040 C4148-040 $83.95TC,TD&TF 1250-1500cc 68MM COPPER .043 C4309-043 $65.05

74MM COPPER .043 C4310-043 $65.05

28

C29064Pgs 4-31 10.12.04 3:00 PM Page 26

Page 7: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PriceMITSUBISHIECLIPSE, GALANT, 4G63,463T-B, DOHC 16V 2 LITRE 85.5MM MLS .051 C4233-051 $83.95EAGLE TALON 86MM MLS .051 C4234-051 $83.95PLYMOUTH LASER 1987-99 87MM MLS .051 C4235-051 $83.95LANCER THRU EVO3 1989-95 LANCER EVO4 AND UP 4G63, DOHC 16V 2 LITRE 85MM MLS .051 C4157-051 $83.951996-UP 86MM MLS .051 C4156-051 $83.95GALANT, EXPO, 4G64K SOHC 2.4 LITRE 88MM COPPER .050 C4213-050 $66.10SPACE WAGON 1993-96DIAMANTE, MONTERO, 6G72-SOHC 24V/ 93MM MLS .051 C4243-051 $83.95GT3000 1991-UP 6G72D4-DOHC 24V 95MM MLS .051 C4240-051 $83.95ECLIPSE RS/GS 1995-99 420A DOHC 2 LITRE 87.5MM MLS .040 C5497-040 $80.45TALON 1995-UP 88.5MM MLS .040 C5498-040 $80.45

NISSANSUNNY, PULSAR 1980-86 E15S/E, E15T/ET 1.5 LITRE 77.5MM MLS .040 C4178-040 $83.95SENTRA,PRIMERA,SERENA, SR20DE/DET-W/O 88.5MM MLS .030 C4130-030 $83.95200SX,ALMERA, ADDITIONAL OIL HOLESSUNNY PULSAR, SR20DE/DET- WITH BOTH 88.5MM MLS .040 C4283-040 $83.95SILVIA,INFINITY G20 OIL HOLES ON INTAKE SIDE

SR20DE/DET- WITH ONE OIL HOLES 87.5MM MLS .040 C4324-040 $83.95ON INTAKE SIDE

240SX,SILVIA KA24DE DOHC 16V 2.4 LITRE 90MM MLS .040 C4285-040 $83.9591MM MLS .040 C4286-040 $83.95

SKYLINE,SKYLINE GTR, RB25 2.5L STR.6 86MM MLS .051 C4317-051 $157.45PATROL 87MM MLS .051 C4318-051 $157.45

RB26 2.6L STR.6 86MM MLS .051 C4319-051 $157.4587MM MLS .051 C4320-051 $157.4588MM MLS .051 C4321-051 $157.45

RB30 2.6L STR.6 86MM MLS .051 C4322-051 $157.4587MM MLS .051 C4323-051 $157.45

SKYLINE,240RS FJ20E/ET 2.0L 90MM MLS .051 C4326-051 $94.4591MM MLS .051 C4327-051 $94.45

300ZX 1990 and Later VG30DE/DETT, 3.0L V-6 88MM MLS .045 C4346-045 $83.9599MM MLS .045 C4347-045 $83.95

ALTIMA,MAXIMA,350Z, VQ30DE/VQ35DE 3.0L/3.5, V-6 96MM MLS .030 C4345-030 $86.05MURANO,PATHFINDER, LEFT SIDE GASKET 98MM MLS .030 C4344-030 $86.05QUEST, G35, FX35 (INFINITY) 100MM MLS .030 C4343-030 $86.05

RIGHT SIDE GASKET 96MM MLS .030 C4361-030 $86.0598MM MLS .030 C4362-030 $86.05100MM MLS .030 C4363-030 $86.05

PEUGEOT / CITROEN405 MI-16,605S/SRI XU10J2, XU10J4, XU9J4/J4Z 84MM MLS .051 C4225-051 $94.45

85MM MLS .051 C4226-051 $94.4586.5MM MLS .051 C4227-051 $94.4588MM MLS .051 C4228-051 $94.45

29

C29064Pgs 4-31 10.12.04 3:00 PM Page 27

Page 8: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PricePORSCHE

924 88MM COPPER .050 C4149-050 $83.95928 4.7 & 5.0 LITRE 1983-97 (RIGHT) 100MM MLS .045 C5780-045 $83.95928 4.7 & 5.0 LITRE 1983-97 (LEFT) 100MM MLS .045 C5781-045 $83.95928 4.7 & 5.0 LITRE 1983-97 (RIGHT) 104MM MLS .045 C5782-045 $83.95928 4.7 & 5.0 LITRE 1983-97 (LEFT) 104MM MLS .045 C5783-045 $83.95944 2.5 LITRE 100.5MM MLS .040 C4272-040 $83.95

103MM MLS .040 C4273-040 $83.95944 2.7/3.0 LITRE 106MM MLS .040 C4274-040 $83.95

ROVERRANGE,DISCOVERY 1970-93 V-8 15G,21D-25D,35D-38D 89MM MLS .040 C4367-040 $86.053.5 SEDAN,TRIUMPH TR8 94MM MLS .040 C4368-040 $86.05

96MM MLS .040 C4369-040 $86.05RANGE,DISCOVERY 1994-UP V-8 35D-38D,40D,42D,46D 89MM MLS .040 C4366-040 $86.05

94MM MLS .040 C4365-040 $86.0596MM MLS .040 C4364-040 $86.05

SIMCA/CHRYSLERSIMCA 1971-80 1000R2 1.3/1.6 LITRE 80.5MM MLS .046 C4325-046 $83.95

SUBARUIMPREZA ,LEGACY EJ20EN SOHC 16V 93MM MLS .040 C4260-040 $45.10IMPREZA ,LEGACY, EJ20GN DOHC 16V 93MM MLS .051 C4261-051 $45.10WRX TURBOS EJ20(EJ27) 103MM MLS .051 C4360-051 $45.10IMPREZA, LEGACY EJ22E SOHC 16V 98MM MLS .040 C4262-040 $45.10IMPREZA, LEGACY TURBOS EJ22E SOHC 16V TURBO 98MM MLS .051 C4263-051 $45.10LEGACY EJ25 100MM MLS .040 C4264-040 $45.10SVX 1992-97 EJ33 V-6 3.3L 98MM MLS .065 C4340-065 $83.95

100MM MLS .065 C4341-065 $83.95102MM MLS .065 C4342-065 $83.95

TOYOTACOROLLA 1977-83 3KU/3KJ/4K 1.2 & 1.3 LITRE 84MM COPPER .043 C4105-043 $73.45CELICA, MR2, 3S-GE,3S-GTE 2 LITRE 87MM MLS .040 C4314-040 $83.95MR2 TURBO 1989-97CELICA, MR2, CAMERY 5S-FE 2.2 LITRE 88MM MLS .040 C4315-040 $83.951990-97COROLLA,CELICA 1972-77 2TG 87MM CFM-20 / .051 C4108-051 $72.40TERCEL,COROLLA 1984-94 2EE,3EE 1.3 & 1.5 LITRE 74MM COPPER .050 C4109-050 $73.45COROLLA,MR2 1984-89 4A-GE,GELC,CZE 1.6 LITRE DOHC 16V 81MM MLS .040 C4170-040 $83.95

83MM MLS .040 C4166-040 $83.95CELICA,CORONA 1972-81 18-R 2.0 LITRE 92MM CFM-20 / .051 C4172-051 $76.60CELICA, CAMRY, COROLLA, 2T,2TC,3T,3TC 1.6 & 1.8 LITRE 87MM MLS .040 C4258-040 $83.95CORONA 89MM MLS .040 C4176-040 $83.95CORONA,CELICA 1974-81 20R 2.2 LITRE 92MM MLS .040 C4268-040 $83.95

30

C29064Pgs 4-31 10.12.04 3:00 PM Page 28

Page 9: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

SPORT COMPACT HEAD GASKETSFor most MLS listings add “HP” to part numbers for nitrous and turbo applications- Example C4168HP

Make / Model Engine Bore Material Part # List PriceTOYOTACELICA-CRA, CORONA, 22R/REC,22R,22R-TEC 2.4 LITRE 95MM CFM-20 / .043 C4184-043 $76.604 RUNNER 1981-89 95MM MLS .040 C4269-040 $83.95TUNDRA, LANDCRUISER 2UZ-FE RIGHT SIDE V8 4.7 LITRE 98MM MLS .040 C4211-040 $88.15

92MM MLS .040 C4357-040 $88.152000-02 2UZ-FE LEFT SIDE V8 4.7 LITRE 98MM MLS .040 C4212-040 $88.15

92MM MLS .040 C4358-040 $88.15TACOMA V-6 1995-UP, 5VZ-FE RIGHT SIDE 3.4 LITRE V6 98MM MLS .040 C4214-040 $83.95LANDCRUISER V-6 1996-UP 5VZ-FE LEFT SIDE 3.4 LITRE V6 98MM MLS .040 C4215-040 $83.95TACOMA 4-CYL 1995-UP 2RZ-FE/3RZ-FE 2.4 & 2.7 LITRE 97MM MLS .040 C4245-040 $83.95SUPRA,SUPRA TURBO 7M-GE,7M-GTE 3 LITRE 84MM MLS .051 C4278-051 $157.451987-92 86MM MLS .051 C4275-051 $157.45SUPRA,SUPRA TURBO 2JZ-GE,2JZ-GTE 3 LITRE 87MM MLS .051 C4276-051 $157.451993-UP / LEXUS IS300

TRIUMPHSPITFIRE 1500CC 74MM COPPER .043 C4153-043 $73.45TR4 4 CYLINDER 88MM CFM-20 / .043 C4152-043 $73.45TR6 6 CYLINDER 76MM COPPER .043 C4154-043 $73.45

VAUXHALL / OPEL1.6 LITRE 16V 82MM MLS .051 C4257-051 $83.952.3 LITRE 4 CYLINDER SOHC 99MM CFM-20 / .059 C4129-059 $75.55

101MM CFM-20 / .059 C4224-059 $75.55TC, 2.0 LITRE 16 VALVE 4 CYLINDER 88MM MLS / .051 C4216-051 $83.95

VOLVO121, 122, 123, 131, 132, B18A/B/D 1961-68 86M MLS/ .045 C4287-045 $104.95133, 142, 144, 145, PV544, B20A/E/F 1968-UP 90MM MLS/ .045 C4288-045 $104.95P1800, 240, 242, 244, 245 92MM MLS/ .045 C4289-045 $104.95

VOLKSWAGEN / AUDIGOLF,PASSAT,VENTO AAM/ABS/ADZ 1.8 LITRE 83MM MLS .051 C4247-051 $83.95

2E,ADY,ABF,AGG,9A 2.0 LITRE 85MM MLS .051 C4246-051 $83.95

31

C29064Pgs 4-31 10.12.04 3:00 PM Page 29

Page 10: Gasket Materials

32

SealsDESCRIPTION Signal Part # TTS PART # COMETIC PART #Jessel Small Block Crank B/Drive F.C. ..............................86587 ....................................T-13527 ......................................C5376Jessel Big Block Crank B/Drive F.C...................................86622 ................................T13553 Rev. B ................................C5377Jessel (SEL 38000) Cam ..................................................86586 ................................T13561 Rev. B ..............................C5435Aluminum GM Sprint 400 Main..........................................86410 ....................................T-13675 ......................................C5672Chevy Small Block Rear Split Seal....................................86625 ..................................T-13675-DL ..................................C5379Chevy Big Block Rear Split Seal........................................86665 ....................................T-13676 ......................................C5381Dodge R-5 Small Block Rear Crank ..................................14255 ....................................T-14255 ......................................C5396Dodge R-5 Small Block Rear Crank ..............................14255DS ............................T-14255 Rev. A ................................C5440Dodge R-5 Jessel Front Crank ..........................................13668 ....................................T-13668 ......................................C5398Dodge R-5 Jessel Cam Shaft ............................................13667 ....................................T-13667 ......................................C5397Ford Rear Crankseal 351 WI / 302 Crank ........................85472 ....................................T-13584 ......................................C5384Ford Rear Crankseal 302 ................................................13610 ....................................T-13610 ......................................C5385Ford Front Crankseal 302 and 351....................................85338 ....................................T-13690 ......................................C5386Ford R.R. Crankseal 351 ..................................................85339 ....................................T-14053 ......................................C5391Ford 351 Front Crank / Yates Drive ..................................85741 ....................................T-14276 ......................................C5490GM Small Block Front Crankseal ......................................86990 ....................................T-13852 ......................................C5378GM Big Block Front Crankshaft ........................................86910 ....................................T-13583 ......................................C5380GM Big Block RR Crankshaft Mark V, VI........................14126CW ..............................T-14126-CW ..................................C5382GM Big Block Shaft Mark V, VI......................................14126CCW ............................T-14126-CCW ................................C5383GM BB Drag Race JESEL Cam ......................................86586 ....................................T-13561 ......................................C5673GM BB Drag Race JESEL Crank ......................................86622 ....................................T-13553 ......................................C5675GM BB Split Rear Crank....................................................86665 ....................................T-13676 ......................................C5676MERCURY Marine GM MARK V,VI ..............................14126CW ..............................T-14126-CW ..................................C5678

Timing Cover Seal with GasketDESCRIPTION PART #196,231,252 BUICK REPLACES ROPE ..............................C5708CHEVY SB 265-400 1955-93................................................C5530CHEVY BB 396-454 1965-98................................................C5650CHRYSLER 273,318,340,360 ..............................................C5631289,302,251C,M,W390,429,460............................................C5656

2 PC Viton Rear Main SealDESCRIPTION PART #196,231,252 BUICK W SIDE RAILS ..................................C5707CHEVY 283-400 ..................................................................C5680CHEVY 400 ALIGN HONE AND ALUMINUM BLOCKS ......C5681CHEVY BB 396-454 ............................................................C5682CHRYSLER 273,318,340 ..................................................C5683CHRYSLER 360 ..................................................................C5684CHRYSLER MAIN CAP SEAL - 273,318,340,360 ..............C5685CHRYSLER 361-440 & HEMI..............................................C5686SIDE RAIL SEALS 361-440 & HEMI ..................................C5687

ENGINE CRANKSHAFT SEALS• Seals are designed for both Wet and Dry Sump applications• Highest Vacuum Obtainable

AutomotiveGaskets

hi-performance

Page 11: Gasket Materials

33

Application Stem I.D. Guide O.D. H W Part # Style

UNIVERSAL.373 x .625 x .531 x .742 VS-403V VSB.373 x .562 x .516 x .661 VS-377V VSB.373 x .530 x .516 x .677 VS-375V VSB.373 x .500 x .531 x .623 VS-373V VSB.344 x .562 x .518 x .661 VS-562V VSB.344 x .530 x .527 x .674 VS-530V VSB.344 x .500 x .531 x .623 VS-108V VSB.344 x .472 x .435 x .677 VS-472V VIV.344 x .500 x .460 x .682 VS-304XV VSW-2 RING.344 x .562 x .485 x .677 VS-304-305V SW-1RG&1BD.315 x .531 x .516 x .677 VS-802V VSB.315 x .500 x .531 x .623 VS-804V VSB

UNIVERSAL NASCAR.313 x .476 x .517 x .562 VS-8476V VSB2.276 x .476 x .517 x .562 VS-435V VSB2.235 x .476 x .517 x .562 VS-6476V VSB2

UNIVERSAL (O-RING)11/32 O-RING VS-133V O-RING

PREMIUM VITON (Replacement shedder umbrellas)

11/32 Replaces nylon type .344 x .623 x .455 x .710 VS-273V3/8 Replaces nylon type .374 x .623 x .455 x .710 VS-274V

HONDAH23A1 2.2L .260 x .476 x .410 x .541 VS-PT2 VSBNISSANGA161, CA18DE, SR20 .236 x .395 x .458 x .496 VS-504 VSBTOYOTA22R .315 x .514 x .403 x .610 VS-458 VSB3E, 2TZ, 3SGTE .237 x .435 VS-473 TBA4A, 7A, 3SF, 5S, 2V, 7M .237 x .435 x .366 x .529 VS-475 VSB2RZ, 3RZ, 5VZ (96-2001) 1MZFE INTAKE .236 x .435 x .392 x .531 VS-T100 VSB2JZ, 2RZ, 3RZ, 5SFE (96-2001) .237 x .435 x .406 x .534 VS-481 VSB2JZ (IN), 5EFE (96-2001) .236 x .435 x .394 x .520 VS-535 VSB

Seal definition by abbreviated code

VSB - Positive-metal body with spring garter on chimney & rubber on inside of skirt

VSB2 - Positive-metal body with spring garter on chimney & NO rubber on inside of skirt

VIV - Positive-metal body with spring garter on chimney & rubber on inside of skirt, Low profile Euro design

VSW - Positive - ALL rubber seal with retainer band & ring

2 RING - Positive - ALL rubber seal with 2 retainer rings

VALVE STEM SEALS

AutomotiveGaskets

hi-performance

Page 12: Gasket Materials

34

WARRANTY DISCLAIMER* Due to the nature of performance applications, the parts in this catalog are sold without any express warranty or any implied warranty of merchantabilityor fitness for a particular purpose. Cometic Gasket Inc. shall not, under any circumstances, be liable for any special, incidental or consequential dam-ages, including, person, party or property, but not limited to, damage, or loss of property or equipment, loss of profits or revenue, cost of purchased orreplacement goods, or claims of customers of the purchase, which may arise and/or result from sale, installation or use of these parts. Installation ofthese parts could adversely affect the motor manufacturers warranty coverage.

VENUE-The agreed upon venue, in the event of any dispute whatsoever between the parties, whether instituted by either party, including, but not limitedto, contract terms, payment terms, delivery, type, defects, sufficiency of product, shall be the Court of Common Pleas, Lake County, Ohio or thePainesville Municipal Court, Lake County, Ohio, depending on the amount in controversy. This agreement shall be governed by and construed under the laws of the State of Ohio.

All prices and terms are subject to change without notice.

Terms Open accounts may be established by well rated firms. A credit application is available upon request. Open accounts are due payable Net 30days from date of invoice. No statement will be sent. If an account becomes 60 or more days past due, it is subject to being placed on credit hold. Noorders will be shipped or new orders accepted until past due balance is paid. If an account becomes 90 or more days past due, it is subject to beingplaced for collections. All costs of collection are the responsibility of the customer, including attorney fees, court costs, and other expenses of litigation.

Returns- Authorization (RGA) must be obtained in advance on all returns. A packing slip or invoice number must accompany the merchandise. Noreturns after 30 days from invoice date. All returns are subject to a 25% restocking charge. All custom designed and custom manufactured gaskets arenon-returnable. Only catalog parts are returnable. Review your invoice and notify us immediately of any incorrect or inaccurate information. Shortages must be reported within 10 days.

Part # Description / DimensionsC5263 4 Barrel Open Plenum Holley - .047 ThicknessC5262 4 Barrel 1 3/4 Holes Holley - .047 ThicknessC5280 390 CFM 1 31/32 Holley - .047 ThicknessC5281 4.500 Open Plenum Holley - .047C5282 2 Barrel 1 3/4 - 2 HoleC5388 Holley Air Horn - .060 Thickness

Engine exhaust port cover plates are manufactured from .125aluminum with a rubber nitrile coating on one side and anodizedin your choice of color with Cometic logo imprinted on the otherside. Specifiy color when ordering.Remove header pipes and bolt plates to engine block to eliminate water or dirt entering the motor during cleaning or transportation.Custom plates available in choice of color (black, blue or red)with your logo. Call for pricing.

Description Part # - Black Part # - Blue Part # - RedSB2 CHEVY C5259BK C5259BL C5259RD180 CHEVY C5258BK C5258BL C5258RDFORD Yates C5283BK C5283BL C5283RD

Anodized Engine Exhaust Port Cover Plates

C5263

C5262

C5282

AutomotiveGaskets

hi-performance

Page 13: Gasket Materials
Page 14: Gasket Materials
Page 15: Gasket Materials

AutomotiveGaskets

hi-performance

3

TECHNICAL TIPS•Big Block ChevroletGeneral Motors produces two distinctive V8 Engines that are commonly used in high performance applications. These engines can

be classified in two groups. Engines manufactured between 1965 and 1990 are referred to as the Mark IV or Gen IV engine. Enginesthat have been manufactured from 1991 to present are referred to as the Mark V or Gen V engine. Although there have been manychanges to these blocks along the way the bore spacing and bolt pattern have remained the same. The one change that differentiates these two engines is a coolant passage on the intake or valley side of the block.

The Mark IV passenger and high performance block has two coolant passages at each end on the intake or valley side while theMark V, Mark IV Truck and Mark IV Bow Tie has only one coolant passage at each end on the intake or valley side. You must pay particular attention to this detail when ordering GM Big Block Head gaskets as these two different head gaskets are not interchangeable. This difference is called out in the description in the catalog.

If you do not see a particular bore size and or thickness combination you need or you’re just not sure what to order please call us fortechnical assistance as most combinations can be custom ordered.

•Ford 351 Windsor and Cleveland 289,302,and 351W (Windsor) are very different from the 351C (Cleveland), 351M and 400. The main area of concern is a water pas-

sage in the front of the block, intake or valley side. The Windsor engine uses a functional front cover and water exits the intake mani-fold face of the cylinder head through the intake manifold to the radiator. The 351C, 351M, and 400 block is extended and covered witha flat stamping. Coolant exits the combustion face of the head and into the block, then to the radiator. The Cometic 351W gasket willnot interchange to the Cleveland block.

•Installing a COMETIC MLS (Multi Layer Steel) Head GasketThe first thing you must do before installing the gasket, check all associated hardware thoroughly for nicks, scratches, or

damaged threads as well as checking all threaded holes. If the hardware is inadequate or damaged, gasket failure may be eminent.Also chase all the bolts and tap all threaded holes with the appropriate thread chase or cleaning tap. All hardware and mating surfacesshould be free from any old sealers, rust, or carbon.

Check your dowel pins as they register the gasket and head into proper location. Replace worn or damaged dowels. The gasket mat-ing surfaces must be smooth 50RA or finer. Additional sealer is not required with Cometic MLS Head Gaskets. The outer layers of thegasket are coated with a .001" thick coating of viton (a high temperature flouroelastomer).

Check brass rivet location to ensure the brass rivet does not interfere with the sealing surface on both the block and head. If thebrass rivet needs to be removed a pair of side cutters will give the best results. Remove only the brass rivet.

Once the gasket is in position double check all passages and overall fitment paying special attention to the bore and chamfer. Thegasket should not fall in the bore or lay on the chamfer in any area. A gasket lying on the chamfer or in the bore will most likely cause ahot spot and lead to pre-ignition, possibly causing severe engine damage or gasket failure.

Head Gasket Torque ProcedureIf you are using studs or head bolts, torque hardware to the manufacturers specification. Fasteners works like a springs and must

have proper Torque or Stretch applied to carry the correct amount of clamp force. Also use the proper lube or thread sealer for the job.All fasteners must be final torqued before thread sealant cures to achieve proper torque.

Torque the fasteners in the correct sequence. It is critical to follow manufacturers torque sequence to apply clamp force evenly. A smooth continuous motion is important for every torque sequence. Re-torque is not necessary unless using hardware that has notbeen heat cycled.

INDEXGM ..........................................................................................................................4OLDS ....................................................................................................................12FORD ....................................................................................................................12CHRYSLER............................................................................................................16DODGE..................................................................................................................23SPORT COMPACT................................................................................................25SEALS ..................................................................................................................32CARBURETOR BASE ..........................................................................................34

B29064Pgs 1-3 10/14/04 12:50 PM Page 3

Page 16: Gasket Materials

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

CAST IRON HEADS, DART 4.065 MLS / C.O.T. .040 1 C5325-040 $76.25262, 265, 283, 302, 305, 307,327, 350, 400 4.100 MLS / C.O.T. .040 1 C5704-040 $76.60W/STEAM HOLES 18 AND 23 DEGREE 4.125 MLS / C.O.T. .040 1 C5326-040 $76.25

4.165 MLS / C.O.T. .040 1 C5327-040 $76.254.200 MLS / C.O.T. .040 1 C5328-040 $76.25

VORTEC HEAD W/VALVE POCKETS 4.080 MLS / C.O.T. .040 1 C5474-040 $76.604.165 MLS / C.O.T. .040 1 C5410-040 $76.60

LT-1 1992-96 4.040 MLS / C.O.T. .040 1 C5645-040 $76.604.110 MLS / C.O.T. .040 1 C5646-040 $76.60

SB BD2000 BRODIX 4.030 MLS / C.O.T. .040 1 C5404-040 $76.604.125 MLS / C.O.T. .040 1 C5405-040 $76.604.135 MLS / C.O.T. .040 1 C5406-040 $76.604.160 MLS / C.O.T. .040 1 C5407-040 $76.604.200 MLS / C.O.T. .040 1 C5408-040 $76.60

ALL OTHER SB BRODIX HEADS 4.030 MLS / C.O.T. .040 1 C5399-040 $76.604.125 MLS / C.O.T. .040 1 C5400-040 $76.604.135 MLS / C.O.T. .040 1 C5401-040 $76.604.160 MLS / C.O.T. .040 1 C5402-040 $76.604.200 MLS / C.O.T. .040 1 C5403-040 $76.60

HOLDEN 308 V-8 4.100 MLS / C.O.T. .040 1 C5806-040 $86.054.200 MLS / C.O.T. .040 1 C5807-040 $86.05

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

SPLAY VALVE GM .094 KF 1 C5390-094 $20.95CHEVY 18 DEGREE / BRODIX 12 DEGREE .094 KF 1 *C5537-094 $20.95

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

1.350 x 2.250 18 DEGREE .047 KF 2 C5541-047 $25.151.240 x 2.100 WITH BLOCKED EXHAUST CROSS OVER .047 KF 2 C5542-047 $25.1523 DEGREE AND CAST IRON HEADS .094 KF 2 C5544-094 $25.151.240 x 2.100 W OPEN EXH. .047 KF 2 C5545-047 $25.15

AutomotiveGaskets

hi-performance

GMV8 Small Block 262, 265, 283, 302, 305, 307, 327,350, 400 and LT-1

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)V8 Small Block 262, 265, 283, 302, 305, 307, 327, 350, 400 and LT-1 ................................Part # - C5644 / List Price $119.65

*KIT COMPONENTS - C5536-060, C5299-018, C5295-094, C5539-064, C5531-060, C5680, C5537-094, C5538-047 & C5530

4

C29064Pgs 4-31 10.12.04 2:59 PM Page 2

Page 17: Gasket Materials

INTAKE GASKETS (Continued)

Description Material Pkg. Qty. Part # List Price

CROSS OVER 23 DEGREE AND CAST IRON HEADS .060 KF 2 C5546-060 $25.15CAST IRON,DART 1.280 x 2.170 .060 KF 2 C5528-060 $22.05BD-2000 BRODIX .060 KF 1 C5421-060 $11.05WP12S BRODIX .059 CFM-20 1 C5425-059 $11.05WP 247 BRODIX .059 CFM-20 1 C5426-059 $11.05WP 262 BRODIX .059 CFM-20 1 C5427-059 $11.05GB 2000 BRODIX .059 CFM-20 1 C5423-059 $11.05TRACK 1 BRODIX .059 CFM-20 1 C5414-059 $11.05STREET BRODIX .059 CFM-20 1 C5416-059 $11.05END PCS FOR VALLEY COVER .060 KF 2 *C5536-060 $5.20

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

18 DEGREE 1.500 x 1.470 .064 AM 2 C5314-064 $30.40283,302,307,305,327 23 DEGREE .064 AM 2 C5548-064 $19.901.500 ROUND PORT .064 AM 2 C5549-064 $19.901.560 x 1.560 .064 AM 2 *C5539-064 $23.05GB 2000 .064 AM 1 C5422-064 $9.35TRACK 1 .064 AM 1 C5415-064 $9.35STREET HEAD .064 AM 1 C5417-064 $9.35

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

TIMING COVER GASKET .031 KF 1 C5261-031 $12.55COVER SEAL WITH GASKET KIT *C5530 $16.75WATER PUMP GASKET .018 AFM 1 *C5299-018 $0.55OIL PAN - LEFT HAND DIP STICK W/PAN SEALS .094 KF KIT *C5295-094 $28.30OIL PAN - SB RIGHT SIDE DIPSTICK THICK FRONT SEAL KIT C5294 $28.30OIL PAN - SB RIGHT SIDE DIPSTICK THIN FRONT SEAL KIT C5296 $28.30DISTRIBUTOR GASKET .060 KF 1 *C5531-060 $1.05REAR MAIN - SPLIT SEAL 2 PC. VITON 1 *C5680 $20.95THERMOSTAT GASKET .047 KF 1 *C5538-047 $2.05

AutomotiveGaskets

hi-performance

GMV8 Small Block 262, 265, 283, 302, 305, 307, 327,350, 400 and LT-1

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel 5

C29064Pgs 4-31 10.12.04 3:00 PM Page 3

Page 18: Gasket Materials

AutomotiveGaskets

hi-performance

GMSmall Block SB2 Race

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

350,400 SB2 4.125 MLS / C.O.T .040 1 C5321-040 $76.254.165 MLS / C.O.T .040 1 C5323-040 $76.254.190 MLS / C.O.T .040 1 C5472-040 $76.254.200 MLS / C.O.T .040 1 C5324-040 $76.25

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

SB2 .188 KF 1 C5235-188 $20.95

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

2.085 x 1.560 .031 KF 2 C5311-031 $28.30SB2 MLS / C.O.T. .040 2 C5819-040 $62.90

VALLEY GASKETS

Description Material Pkg. Qty. Part # List Price

STOCK OPENING .045 AFM 2 C5647-045 $7.30.970 HOLES .045 AFM 2 C5308-045 $20.25.750 & .625 HOLES .045 AFM 2 C5307-045 $20.25

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

1.500 X 1.600 .065 S 2 C5552-065 $31.45

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

TIMING COVER .020 RC 1 C5533-020 $17.80WATER PUMP .018 AFM 1 C5299-018 $0.55OIL PAN .060 AFM 2 C5553-060 $31.45

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel6

C29064Pgs 4-31 10.12.04 3:00 PM Page 4

Page 19: Gasket Materials

AutomotiveGaskets

hi-performance

GMBig Block

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

CHEVY 396,402,427,454,502 MARK IV AND 4.320 MLS / C.O.T. .040 1 C5816-040 $86.05BOW TIE HI- PERFORMANCE 4.375 MLS / C.O.T. .040 1 C5329-040 $86.052 EACH END LOWER 3 OPEN 4.540 MLS / C.O.T. .040 1 C5330-040 $86.05

4.630 MLS / C.O.T. .040 1 C5331-040 $86.05CHEVY 396,402,427,454,502 MARK V,VI 4.320 MLS / C.O.T. .040 1 C5817-040 $86.051 EACH END LOWER 3 OPEN 4.375 MLS / C.O.T. .040 1 C5332-040 $86.05

4.540 MLS / C.O.T. .040 1 C5333-040 $86.054.630 MLS / C.O.T. .040 1 C5334-040 $86.05

DRCE III 4.900 BORE CENTER 4.675 MLS / C.O.T. .051 1 C5796-051 $111.254.700 MLS / C.O.T. .051 1 C5797-051 $111.254.780 MLS / C.O.T. .051 1 C5798-051 $111.25

CHEVY, PONTIAC & OLDSMOBILE 4.675 MLS / C.O.T. .051 1 C5449-051 $111.25500CI DRCE-2/4.900 BORE CENTER 4.700 MLS / C.O.T. .051 1 C5450-051 $111.25

4.780 MLS / C.O.T. .051 1 C5451-051 $111.25MERCURY GEN IV,V,VI BLOCKS 4.500 MLS / C.O.T. .051 1 C5634-051 $78.704 BOLT INTAKE SIDE OF GASKET 4.530 MLS / C.O.T. .051 1 C5635-051 $78.70

4.580 MLS / C.O.T. .051 1 C5636-051 $78.704.600 MLS / C.O.T. .051 1 C5637-051 $78.70

MERCURY MARINE 1050 ENGINE 4.500 MLS / C.O.T. .051 1 C5638-051 $78.70GEN IV AND DART BLOCK 4.530 MLS / C.O.T. .051 1 C5639-051 $78.702 BOLT INTAKE SIDE OF GASKET 4.580 MLS / C.O.T. .051 1 C5640-051 $78.70

4.600 MLS / C.O.T. .051 1 C5641-051 $78.70MERCURY MARINE 526/625 GEN VI 4.470 MLS / C.O.T. .040 1 C5760-040 $86.05MERCURY MARINE 8.1 L 496 Right side 4.280 MLS / C.O.T. .051 1 C5761-051 $86.05

4.350 MLS / C.O.T. .051 1 C5762-051 $86.054.450 MLS / C.O.T. .051 1 C5763-051 $86.05

MERCURY MARINE 8.1 L 496 Left Side 4.280 MLS / C.O.T. .051 1 C5764-051 $86.054.350 MLS / C.O.T. .051 1 C5765-051 $86.054.450 MLS / C.O.T. .051 1 C5766-051 $86.05

BRODIX BIG DUKE/ BIG BRODIE 4.310 MLS / C.O.T. .040 1 C5432-040 $78.704.570 MLS / C.O.T. .040 1 C5433-040 $78.704.630 MLS / C.O.T. .040 1 C5434-040 $78.70

ZL-1 4.250 MLS / C.O.T. .040 1 C5746-040 $86.054.300 MLS / C.O.T. .040 1 C5747-040 $86.054.375 MLS / C.O.T. .040 1 C5759-040 $86.05

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

396,402,427 AND 454 EXCEPT SUPER DUTY PONTIAC .188 KF 1 C5343-188 $28.30

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel 7

C29064Pgs 4-31 10.12.04 3:00 PM Page 5

Page 20: Gasket Materials

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

BIG BRODIE OVAL .060 KF 1 C5430-060 $11.05BRODIE RECTANGLE .060 KF 1 C5428-060 $11.05BIG DUKE .060 KF 1 C5419-060 $11.05BIG BLOCK 1.750 x 2.500 RECTANGLE .060 KF 2 C5649-060 $25.15MERCURY BIG BLOCK 1050 MLS / C.O.T. .054 2 C5821-054 $62.90

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

2.000 ROUND PORT .064 AM 2 C5349-064 $31.452.200 ROUND PORT .064 AM 2 C5350-064 $31.45BIG DUKE .064 AM 1 C5418-064 $9.35BIG BRODIE .064 AM 1 C5429-064 $9.35MERCURY BIG BLOCK 1050 MLS / C.O.T. .054 2 C5820-054 $62.90

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

TIMING COVER - ALL BIG BLOCKS .031 KF 1 C5345-031 $20.95WATER PUMP - ALL BIG BLOCKS .039 F 1 C5347-039 $4.50WATER OUT LET - ALL BIG BLOCKS .047 KF 1 C5346-047 $15.70OIL PAN - ALL BIG BLOCK/TRIMMED .094 KF KIT C5344-094 $28.30SIDE RAILS WITH PAN SEALS

AutomotiveGaskets

hi-performance

GMBig Block

GMBuick V6 196, 213, 252, Stage I, II & 3800

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

BUICK V-6 STAGE I,II 3.860 MLS / C.O.T. .040 1 C5691-040 $76.60BUICK V-6 STAGE I,II 4.020 MLS / C.O.T. .040 1 C5692-040 $76.60BUICK V-6 STAGE I,II 4.090 MLS / C.O.T. .040 1 C5693-040 $76.60BUICK V-6 3800 SERIES ( LHS) 3.840 MLS / C.O.T. .065 1 C5720-065 $83.95BUICK V-6 3800 SERIES( RHS) 3.840 MLS / C.O.T. .065 1 C5721-065 $83.95

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)Buick V6 196,231,252, Stage I & II and 3800 ..........................................................................Part # - C5701 / List Price $94.50

*KIT COMPONENTS - C5695, C5696-064, C5697-188, C5698-031, C5707, C5700-094 & C5694-060

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel8

C29064Pgs 4-31 10.12.04 3:00 PM Page 6

Page 21: Gasket Materials

AutomotiveGaskets

hi-performance

Buick V6 196, 213, 252, Stage I, II & 3800

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

CAST IRON & ALUMINUM HEADS .188KF 2 *C5697-188 $28.30

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

ALUM. & CAST IRON STOCK & STAGE I PORTS .060KF 2 *C5694-060 $21.55ALUM. & CAST IRON STAGE II PORTS .060KF 2 C5792-060 $24.70INTAKE CROSS OVER / INTAKE END GASKETS MOLDED 2 *C5695 $6.25

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

ALUM.& CAST IRON STOCK & STAGE I PORTS .064AM 2 *C5696-064 $24.70ALUM.& CAST IRON STAGE II PORTS .064AM 2 C5791-064 $24.70

MISCELLANEOUS

Description Material Pkg. Qty. Part # List Price

TIMING COVER GASKET STAGE I,II BLOCKS .031KF 1 *C5698-031 $10.45REAR MAIN SEAL WITH SIDE RAILS VITON 1 *C5707 $13.60OIL PAN 20 BOLT .094KF 1 *C5700-094 $19.90

Buick V8 400, 430 & 455

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

ALL YEARS 4.312 MLS / C.O.T. .040 1 C5753-040 $86.05ALL YEARS 4.385 MLS / C.O.T. .040 1 C5754-040 $86.05ALL YEARS 4.400 MLS / C.O.T. .040 1 C5755-040 $76.60

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

ALL YEARS .094 KF 1 C5774-094 $19.90

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

1.70X2.450 ALL YEARS .060 KF 2 C5775-060 $23.05

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

GM

GM

9

C29064Pgs 4-31 10.12.04 3:00 PM Page 7

Page 22: Gasket Materials

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

ALL YEARS .064 AM 2 C5776-064 $26.20

MISCELLANEOUS

Description Material Pkg. Qty. Part # List Price

TIMING COVER ALL YEARS .018 AFM 1 C5777-018 $15.70

AutomotiveGaskets

hi-performance

GMBuick V8 400, 430 & 455

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

GMECOTEC 2.2 Liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

L61/L42 CNG DOHC 4 CYL 87MM MLS / C.O.T. .040 1 C5768-040 $83.9589MM MLS / C.O.T. .040 1 C5804-040 $83.9592MM MLS / C.O.T. .040 1 C5805-040 $83.95

GMV6 900 229 & 262 4.3 liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

Chevy V6 1985 and up 4.060 MLS / C.O.T. .040 1 C5739-040 $83.954.120 MLS / C.O.T. .040 1 C5740-040 $83.954.155 MLS / C.O.T. .040 1 C5741-040 $83.95

GMCadillac V8 4.6 Liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

32 Valve 4.6 LITER Left Side 3.700 MLS / C.O.T. .065 1 C5716-065 $104.9532 Valve 4.6 LITER Right Side 3.700 MLS / C.O.T. .065 1 C5717-065 $104.95

10

C29064Pgs 4-31 10.12.04 3:00 PM Page 8

Page 23: Gasket Materials

AutomotiveGaskets

hi-performance

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

GMLS-1

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

5.7,6,7 LITER LS-1 3.910 MLS / C.O.T. .051 1 C5475-051 $76.604.130 MLS / C.O.T. .051 1 C5317-051 $76.604.160 MLS / C.O.T. .051 1 C5318-051 $76.604.190 MLS / C.O.T. .051 1 C5319-051 $76.25

LS-1 C-5 DARTON SLEEVE 3.910 MLS / C.O.T. .040 1 C5788-040 $83.954.125 MLS / C.O.T. .040 1 C5789-040 $83.954.165 MLS / C.O.T. .040 1 C5790-040 $83.95

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

LS-1 C-5 MLS / C.O.T. .030 SET C5818-030 $32.50

GMPontiac V8 326, 350, 389, 400, 421, 428 & 455

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

326CI 3.750 MLS / C.O.T. .040 1 C5767-040 $86.05350CI 3.950 MLS / C.O.T. .040 1 C5710-040 $86.05400,428 & 455CI 4.160 MLS / C.O.T. .040 1 C5711-040 $86.05400,428 & 455CI 4.200 MLS / C.O.T. .040 1 C5769-040 $86.05400,428 & 455CI 4.300 MLS / C.O.T. .040 1 C5712-040 $86.05

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

ALL MODELS STOCK HEAD .094 KF 1 C5779-094 $19.90

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

389,400,421,428 455CI .060 KF 2 C5778-060 $23.05

11

C29064Pgs 4-31 10.12.04 3:00 PM Page 9

Page 24: Gasket Materials

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

330, 350, 400, 403 & 455 4.125 MLS / C.O.T. .040 1 C5808-040 $86.054.200 MLS / C.O.T. .040 1 C5809-040 $86.054.270 MLS / C.O.T. .040 1 C5811-040 $86.054.400 MLS / C.O.T. .040 1 C5810-040 $86.05

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

330, 350, 400, 403 & 455 .064 AM 2 C5812-064 $26.20

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

330, 350, 400, 403 & 455 .060 KF 2 C5813-060 $23.05

MISCELLANEOUS

Description Material Pkg. Qty. Part # List Price

OIL PAN - 330, 350, 400, 403 & 455 .094 KF KIT C5822-094 $27.20TIMING COVER - 330, 350, 400, 403 & 455 .020 F 1 C5823-020 $15.70VALVE COVER - 330, 350, 400, 403 & 455 .188 KF 1 C5824-188 $19.90

AutomotiveGaskets

hi-performance

OLDS 330, 350, 400, 403 & 455

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

FORD 1.6 Liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

Fiesta / Escort / Orion 1.6 CVH 1985-93 83mm MLS / C.O.T. .051 1 C5756-051 $83.95

FORD 4-Cylinder 2 Liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

2 LITER SOHC NEP ENGINE 92.5MM MLS / C.O.T. .040 1 C4218-040 $83.952 LITER DOHC YB GROUP A 92.5MM MLS / C.O.T. .040 1 C4219-040 $126.00HI-PERFORMANCE(HP)2 LITER DOHC-STANDARD NON HP 92.5MM MLS / C.O.T. .051 1 C4350-051 $83.95ZETEC FOCUS/CONTOUR/ ESCORT ZX-2 87MM MLS / C.O.T. .027 1 C4279-027 $76.60

12

C29064Pgs 4-31 10.12.04 3:00 PM Page 10

Page 25: Gasket Materials

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)4-Cylinder 2.3 Liter SOHC 140 Engine ....................................................................................Part # - C5657 / List Price $45.10

*KIT COMPONENTS - C5370-060, C5371-060, C5374-031, C5375-031 & 5372-064

AutomotiveGaskets

hi-performance

FORD 4-Cylinder 2.3 liter SOHC 140 Engine

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

2.3 LITER SOHC 140 ENGINE 3.830 MLS / C.O.T. .040 1 C5369-040 $62.953.940 MLS / C.O.T. .040 1 C5709-040 $62.95

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

1.850 ROUND .060 KF 1 *C5370-060 $11.551.850 x 2.350 .060 KF 1 *C5371-060 $11.55

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

1.450 ROUND .064 AM 1 *C5372-064 $13.60

MISCELLANEOUS

Description Material Pkg. Qty. Part # List Price

TIMING COVER .031 KF 1 *C5374-031 $8.35WATER OUTLET .031 KF 1 *C5375-031 $1.35

FORDV8 289, 302 & 351ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)351W ..........................................................................................................................................Part # - C5658 / List Price $119.65

*KIT COMPONENTS - C5654-094, C5652-060, C5653-060, C5655-064, C5656, C5662-018, C5663-018, C5278-094 & C5389-060

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

302,351 SVO ROUND BORE 4.030 MLS / C.O.T. .040 1 C5478-040 $76.604.080 MLS / C.O.T. .040 1 C5480-040 $76.604.100 MLS / C.O.T. .040 1 C5481-040 $76.604.155 MLS / C.O.T. .040 1 C5483-040 $76.604.195 MLS / C.O.T. .051 1 C5509-051 $76.604.200 MLS / C.O.T. .040 1 C5485-040 $76.60

289,302,351W NON SVO 4.030 MLS / C.O.T. .040 1 C5511-040 $76.604.080 MLS / C.O.T. .040 1 C5513-040 $76.604.100 MLS / C.O.T. .040 1 C5514-040 $76.604.155 MLS / C.O.T. .040 1 C5515-040 $76.604.200 MLS / C.O.T. .040 1 C5517-040 $76.60

C29064Pgs 4-31 10.12.04 3:00 PM Page 11

Page 26: Gasket Materials

AutomotiveGaskets

hi-performance

FORDV8 289, 302 & 351

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

302 351W SVO WITH VALVE POCKETS 4.100 MLS / C.O.T. .040 1 C5358-040 $76.25YATES STYLE RIGHT SIDE 4.180 MLS / C.O.T. .040 1 C5365-040 $76.25

4.200 MLS / C.O.T. .040 1 C5367-040 $76.25302,351W SVO WITH VALVE POCKETS 4.100 MLS / C.O.T. .040 1 C5359-040 $76.25YATES STYLE LEFT SIDE 4.180 MLS / C.O.T. .040 1 C5364-040 $76.25

4.200 MLS / C.O.T. .040 1 C5366-040 $76.25

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

N351 .094 KF 2 *C5654-094 $19.90SVO, M6049 HEADS .094 KF 1 C5659-094 $10.45

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

N351 2.120 x 1.280 .060 KF 2 *C5652-060 $23.051.350 x 2.000 M6049 3C YATES .047 KF 2 C5268-047 $22.35INTAKE CROSS OVER / FRONT AND REAR N351 .060KF 2 *C5653-060 $23.05

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

N351 1.585 x 1.681 .064 AM 2 *C5655-064 $20.95M6049 A3 1.950 ROUND .064 AM 2 C5355-064 $30.40M6049 C302,D302 1.890 ROUND .064 AM 2 C5356-064 $30.40ALL YATES HEAD 1.890X1.725 .064 AM 2 C5357-064 $30.40ALL YATES HEAD 3 PC. SPRING STEEL .040 S 8 C5665-040 $34.60

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

TIMING COVER - 351W .020 RC 1 C5660-020 $10.45TIMING COVER - 351C .020 RC 1 C5661-020 $10.45TIMING COVER - 351W .031 KF 1 C5276-031 $7.65TIMING COVER SEAL - STOCK COVER SEAL 1 *C5656 $17.80WATER PUMP - ALL 302 AND 351C 351W SVO .018 AFM 1 *C5662-018 $10.45WATER PUMP - ALL 302 AND 351C .018 AFM 1 *C5663-018 $10.45351W SVO COVER PLATE OIL PAN GASKET - 351W W/PAN SEALS (RACE) .094 KF KIT C5664-094 $15.70OIL PAN - 351C,SVO W/PAN SEALS .094 KF KIT *C5278-094 $28.30OIL PAN - 351W SVO,302 SVO W/PAN SEAL .094 KF KIT C5279-094 $28.30FUEL PUMP TO BLOCK GASKET .060 AFM 1 *C5389-060 $1.50

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel14

C29064Pgs 4-31 10.12.04 3:00 PM Page 12

Page 27: Gasket Materials

AutomotiveGaskets

hi-performance

FORDV8 4.6 Liter DOHC 4-Valve

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

V-8 4.6 L (LEFT) 94mm MLS / C.O.T. .030 1 C5502-030 $115.4596mm MLS / C.O.T. .030 1 C5837-030 $115.45

V-8 4.6 L (RIGHT) 94mm MLS / C.O.T. .030 1 C5503-030 $115.4596MM MLS / C.O.T. .030 1 C5838-030 $115.45

FORDV8 3.9 Liter

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

AJ35 ENGINE, LINCOLN LS, THUNDERBIRD (RIGHT) 87MM MLS / C.O.T. .030 1 C5770-030 $86.05AJ35 ENGINE, LINCOLN LS, THUNDERBIRD (LEFT) 87MM MLS / C.O.T. .030 1 C5772-030 $86.05AJ35 ENGINE, LINCOLN LS, THUNDERBIRD (RIGHT) 93MM MLS / C.O.T. .030 1 C5771-030 $86.05AJ35 ENGINE, LINCOLN LS, THUNDERBIRD (LEFT) 93MM MLS / C.O.T. .030 1 C5773-030 $86.05

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

FORDV8 390, 406, 410, 427 & 428

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

352,390, 406, 410, 427 & 428 FE 4.080 MLS / C.O.T. .040 1 C5833-040 $86.054.165 MLS / C.O.T. .040 1 C5834-040 $86.054.250 MLS / C.O.T. .040 1 C5835-040 $86.054.400 MLS / C.O.T. .040 1 C5840-040 $86.05

FORDV8 460ci

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

429, 460 CI (No 429 BOSS) 4.400 MLS / C.O.T. .040 1 C5666-040 $83.954.500 MLS / C.O.T. .040 1 C5667-040 $83.954.670 MLS / C.O.T. .040 1 C5668-040 $83.95

15

C29064Pgs 4-31 10.12.04 3:00 PM Page 13

Page 28: Gasket Materials

AutomotiveGaskets

hi-performance

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

FORD460 Pro Stock

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

D/E 460 BLOCK 4.600 MLS / C.O.T. .045 1 C5731-045 $111.254.685 MLS / C.O.T. .045 1 C5732-045 $111.25

A-460 BLOCK 4.400 MLS / C.O.T. .045 1 C5745-045 $111.254.600 MLS / C.O.T. .045 1 C5743-045 $111.254.685 MLS / C.O.T. .045 1 C5744-045 $111.25

A-500 BLOCK (LEFT) 4.600 MLS / C.O.T. .045 1 C5727-045 $111.254.685 MLS / C.O.T. .045 1 C5729-045 $111.25

A-500 BLOCK (RIGHT) 4.600 MLS / C.O.T. .045 1 C5728-045 $111.254.685 MLS / C.O.T. .045 1 C5730-045 $111.25

7.3L DI POWERSTROKE-DIESEL 4.140 MLS / C.O.T. .065 1 C5839-065 $132.25

CHRYSLER318, 340 & 360

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

IRON HEADS 340,360 HP STOCK AND COMMANDO 4.040 MLS / C.O.T. .040 1 C5633-040 $76.604.080 MLS / C.O.T. .040 1 C5622-040 $76.604.125 MLS / C.O.T. .040 1 C5457-040 $83.954.180 MLS / C.O.T. .040 1 C5456-040 $83.95

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

5 BOLT .094 THICKNESS .094 KF 1 *C5623-094 $16.70

INTAKE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

1.170 x 2.300 .060 KF 2 *C5624-060 $25.15CROSS OVER / INTAKE ENDS GASKET .060 KF 2 *C5625-060 $6.25

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)318, 340 & 360 ..........................................................................................................................Part # - C5643 / List Price $119.65

*KIT COMPONENTS - C5623-094, C5624-060, C5625-060, C5628-064, C5627-094, C5629-018, C5630-060, C5642-031,

C5631-018 & C5683

16

C29064Pgs 4-31 10.12.04 3:00 PM Page 14

Page 29: Gasket Materials

AutomotiveGaskets

hi-performance

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

CHRYSLER318, 340 & 360

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

EXHAUST GASKET .064 AM 2 *C5628-064 $19.90

MISCELLANEOUS

Description Material Pkg. Qty. Part # List Price

TIMING COVER .018 AFM 1 C5626-018 $12.55OIL PAN WITH PAN SEALS .094 KF KIT *C5627-094 $26.20THERMOSTAT GASKET .018 AFM 1 *C5629-018 $1.35DIST MOUNTING GASKET .060 KF 1 *C5630-060 $1.05FUEL PUMP TO BLOCK .031 KF 1 *C5642-031 $1.90TIMING COVER & SEAL .018 AFM 1 *C5631-018 $13.20REAR MAIN SEAL - BOTH 318, 340 AND 360 VITON KIT *C5683 $27.25

CHRYSLER426 Hemi & Siamese

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)426 ............................................................................................................................................Part # - C5522 / List Price $119.65

*KIT COMPONENTS - C5601-018, C5602-032, C5603-018, C5604-045, C5606-060, C5642-031, C5607-060, C5608-018, C5686,

C5599-188, C5600-064 & C5598-047

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

426 HEMI 66 AND LATER - 4.310 Gasket Bore 4.250 MLS / C.O.T. .040 1 C5445-040 $83.95426 HEMI AND LATER - 4.340 Gasket Bore 4.280 MLS / C.O.T. .040 1 C5454-040 $83.95426 HEMI - 4.370 Gasket Bore 4.310 MLS / C.O.T. .040 1 C5455-040 $83.95426 HEMI - 4.435 Gasket Bore 4.375 MLS / C.O.T. .040 1 C5446-040 $83.95426 HEMI - 4.560 Gasket Bore 4.500 MLS / C.O.T. .040 1 C5447-040 $83.95

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

VALVE COVER GASKET .188 KF 1 C5599-188 $13.60

17

C29064Pgs 4-31 10.12.04 3:00 PM Page 15

Page 30: Gasket Materials

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

SQUARE 1.756 X 1.875 ARMOR CLAD .064 AM 2 *C5600-064 $19.90

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

WATER INLET GASKET .018 AFM 2 *C5601-018 $9.40WATER PUMP COVER .032 AFM 2 *C5602-032 $9.40THERMOSTAT GASKET .018 AFM 1 *C5603-018 $1.35OIL PUMP GASKET .045 AFM 1 *C5604-045 $4.15TIMING COVER GASKET .018 AFM 1 C5605-018 $12.55OIL PAN GASKET .060 AFM 1 *C5606-060 $13.60FUEL PUMP GASKET .031 KF 1 *C5642-031 $1.90DIST GASKET .060 KF 1 *C5607-060 $1.05TIMING COVER & SEAL .018 AFM 1 *C5608-018 $13.60REAR MAIN SEAL VITON 1 *C5686 $28.65INTAKE GASKET .047 KF 2 C5598-047 $16.70

AutomotiveGaskets

hi-performance

CHRYSLER426 Hemi & Siamese

CHRYSLER361, 383, 400, 440 & 440 Siamese

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

383,400,440 4.380 MLS / C.O.T. .040 1 C5461-040 $83.95383,400,440 4.250 MLS / C.O.T. .040 1 C5459-040 $83.95383,400,440 4.350 MLS / C.O.T. .040 1 C5460-040 $83.95383,400,440 4.410 MLS / C.O.T. .040 1 C5462-040 $83.95383,400,440 4.500 MLS / C.O.T. .040 1 C5464-040 $83.95383,400,440 4.600 MLS / C.O.T. .040 1 C5799-040 $83.95

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)383, 400 & 440 (Does not include Intake Heat Block Off)......................................................Part # - C5524/ List Price $119.65

*KIT COMPONENTS - C5613-094, C5611-060, C5612-060, C5615-032, C5616-018, C5617-060, C5618-018, C5642-031, C5620,

C5686 & C5619-064

18

C29064Pgs 4-31 10.12.04 3:00 PM Page 16

Page 31: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

CHRYSLER361, 383, 400, 440 & 440 Siamese

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

5 BOLT .094 KF 1 *C5613-094 $18.85

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

2.310 x 1.230 .060 KF 2 *C5611-060 $16.70INTAKE CROSS OVER / END RAILS 383, 400 .060 KF 2 *C5612-060 $6.25AND 440

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

WATER PUMP COVER .032 AFM 2 *C5615-032 $9.40THERMOSTAT GASKET .018 AFM 1 *C5616-018 $1.35OIL PAN GASKET .060 AFM 1 *C5617-060 $13.60TIMING COVER GASKET .018 AFM 1 *C5618-018 $12.55FUEL PUMP TO BLOCK .031 KF 1 *C5642-031 $1.90TIMING COVER GASKET & SEAL 1 *C5620 $17.85REAR MAIN SEAL VITON 1 *C5686 $28.65EXHAUST GASKET 1.850 x 1.350 .064 AM 2 *C5619-064 $19.90

19

C29064Pgs 4-31 10.12.04 3:00 PM Page 17

Page 32: Gasket Materials

AutomotiveGaskets

hi-performance

CHRYSLER5.2 Liter, 5.9 liter & Magnum

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)5.2 Liter, 5.9 Liter & Magnum ..................................................................................................Part # - C5690 / List Price $119.65

*KIT COMPONENTS - C5557-047, C5555-047, C5556-047, C5558-064, C5560-094, C5561-018, C5562-018, C5642-031, C5563 &

C5564

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

SUPERCHARGED 4.040 MLS / C.O.T. .120 1 C5565-120 $194.255.2 LITER & 5.9 LITER 4.040 MLS / C.O.T. .040 1 C5554-040 $76.60

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

10 BOLT .047 KF 1 *C5557-047 $25.15

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

MAG.RECT. 2.150 x 1.140 .047 KF 2 *C5555-047 $16.70MAG.RECT. 2.150 x 1.140 .188 KF 2 C5566-188 $34.60INTAKE CROSS OVER / END RAILS .047 KF KIT *C5556-047 $6.25FRONT & REAR

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

MAG. RECT 1.195 x 1.675 .064 AM 2 *C5558-064 $20.95OIL PAN - RAILS ,SEALS .094 KF KIT *C5560-094 $26.20WATER PUMP COVER GASKET .018 AFM 1 *C5561-018 $9.40THERMOSTAT GASKET .018 AFM 1 *C5562-018 $1.35FUEL PUMP TO BLOCK .031 KF 1 *C5642-031 $1.90TIMING COVER & SEAL 1 *C5563 $12.55REAR MAIN SEAL BOTH 5.2 AND 5.9 VITON KIT *C5564 $40.90

20

C29064Pgs 4-31 10.12.04 3:00 PM Page 18

Page 33: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

CHRYSLER500ci Pro Stock 4.900” Bore Centers

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

HEAD GASKET 4.660 MLS / C.O.T. .051 1 C5444-051 $111.25HEAD GASKET 4.685 MLS / C.O.T. .051 1 C5443-051 $111.25HEAD GASKET 4.700 MLS / C.O.T. .051 1 C5442-051 $111.25HEAD GASKET 4.730 MLS / C.O.T. .051 1 C5438-051 $111.25

CHRYSLER360, 410 Sprint & Midget

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

A-8 BLOCK SPRINT 4.165 MLS / C.O.T. .040 1 C5828-040 $76.604.200 MLS / C.O.T. .040 1 C5829-040 $76.604.250 MLS / C.O.T. .040 1 C5830-040 $76.60

A-4 MIDGET & WEDGE 4.165 MLS / C.O.T. .040 1 C5831-040 $76.604.200 MLS / C.O.T. .040 1 C5832-040 $76.60

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

MIDGET, SPRINT .060 AFM 1 C5784-060 $14.15

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

OIL PAN - MIDGET BLOCK .060 AFM 1 C5596-060 $22.00TIMING COVER - SPRINT BLOCKS ALUMINUM .018 AFM 1 C5594-018 $12.55

21

C29064Pgs 4-31 10.12.04 3:00 PM Page 19

Page 34: Gasket Materials

AutomotiveGaskets

hi-performance

CHRYSLERR-3 & R-4

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)R-3 with W-2 Head ....................................................................................................................Part # - C5520 / List Price $119.65

*KIT COMPONENTS - C5568-094, C5569-060, C5570, C5571-064, C5572-018, C5573-018, C5574-018, C5575-094,

C5576-018 & C5631-018

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

R3 W 2 HEAD 4.100 MLS / C.O.T. .040 1 C5567-040 $76.604.200 MLS / C.O.T. .040 1 C5466-040 $76.60

W7,8,9 HEADS 4 AND 6 BOLT 4.060 MLS / C.O.T. .040 1 C5579-040 $76.604.100 MLS / C.O.T. .040 1 C5580-040 $76.604.165 MLS / C.O.T. .040 1 C5581-040 $76.604.185 MLS / C.O.T. .040 1 C5582-040 $76.60

R4 BLOCK, P5 HEAD 4.200 MLS / C.O.T. .040 1 C5801-040 $83.954.250 MLS / C.O.T. .040 1 C5800-040 $83.95

VALVE COVER GASKETS

Description Material Pkg. Qty. Part # List Price

W-2 HEAD .094 KF 2 *C5568-094 $13.60W8 HEADS .094 KF 1 **C5592-094 $13.60

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

W7,8,9 RECT.1.450 x 2.20 .031 KF 2 **C5586-031 $16.701.350 x 2.070 PORT SIZE .060 KF 2 *C5569-060 $16.70INTAKE CROSS OVER / MOLDED RUBBER 2 *C5570 $2.35

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

W7,W8,W9 HEADS D PORT .064 AM 2 **C5593-064 $19.90W2, 1.470 x 1.450 PORT SIZE .064 AM 2 *C5571-064 $18.80

ENGINE GASKET KIT (Less Head Gasket - See complete Head Gasket listing below)R-3 with W-8 Head ....................................................................................................................Part # - C5715 / List Price $119.65

**KIT COMPONENTS - C5592-094, C5586-031, C5593-064, C5572-018, C5573-018, C5574-018, C5575-094, C5576-018

& C5631-018

22

C29064Pgs 4-31 10.12.04 3:00 PM Page 20

Page 35: Gasket Materials

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

AutomotiveGaskets

hi-performance

CHRYSLERR-3 & R-4

MISCELLANEOUS GASKETS

Description Material Pkg. Qty. Part # List Price

FRONT COVER GASKET .018 AFM 1 */**C5572-018 $11.50WATER PUMP GASKET .018 AFM 1 */**C5573-018 $7.65THERMOSTAT GASKET .018 AFM 1 */**C5574-018 $1.35OIL PAN GASKET AND SEAL .094 KF KIT */**C5575-094 $20.50TIMING COVER .018 AFM 1 */**C5576-018 $12.55TIMING COVER & SEAL .018 AFM 1 */**C5631-018 $13.20FUEL PUMP TO BLOCK .031 KF 1 C5642-031 $1.90

DODGE2 & 2.4 Liter

HEAD GASKETS

Description Bore Material Part # List Price

DOHC 16V 420A ENGINE 87.5MM MLS/ C.O.T. .040 C5497-040 $76.6088.5MM MLS/ C.O.T. .040 C5498-040 $76.60

DODGE2.2 & 2.5 Liter

HEAD GASKETS

Description Bore Material Part # List Price

2.2 LITER DOHC EDR ENGINE 1991-93 89.5MM MLS/ C.O.T. .065 C5733-065 $132.252.2 LITER SOHC EDR ENGINE 1982-90 89.5MM MLS/ C.O.T. .065 C5734-065 $132.252.5 LITER SOHC EDM ENGINE 1986-95

23

Page 36: Gasket Materials

DODGEVIPER

HEAD GASKETS

Description Bore Material Pkg. Qty. Part # List Price

VIPER GTS-5 8.0 & 8.3 Liter 4.060 MLS / C.O.T. .051 1 C5814-051 $111.254.125 MLS / C.O.T. .051 1 C5815-051 $111.254.165 MLS / C.O.T. .051 1 C5826-051 $111.25

INTAKE GASKETS

Description Material Pkg. Qty. Part # List Price

.039F 2 C5827-039 $18.85

EXHAUST GASKETS

Description Material Pkg. Qty. Part # List Price

MLS EXHAUST .030 MLS 2 C5825-030 $34.60

AutomotiveGaskets

hi-performance

AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core w/elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

DODGER-5

HEAD GASKETS

Description Bore Material Part #

R-5 HEAD GASKET 4.200 MLS/ C.O.T 040 05045131AD4.240 MLS/ C.O.T 040 05045131AB

MISCELLANEOUS GASKETS

Description Material Part #

WATER MANIFOLD - VALLEY TRAY .031 KF 05049322AB.060 KF 05049322AC.094 KF 05049322AD

VALVE COVER .094 KF 05049088ABDIST COVER GASKET .060 AFM 05049170ABTIMMING COVER GASKET .020 RC 05049169ABOIL PAN .094 KF 05049047AB

24

C29064Pgs 4-31 10.12.04 3:00 PM Page 22