Gas Greens Roller › wzukusers › user-34624692 › ... · 2019-01-02 · Gas Greens Roller The...

#1 Greens Rollers, Gas or Electric!

Quality of Workmanship, InnovativeDesign, Built to Last!

MADE IN THE U.S.A.

Gas Greens Roller

The Transport Trailer comes Standard with the Salsco Greens Roller. Turf tires protect the turf, and the extra long tailgate with rubber strips, means easy on and off. You’ll be on your way To the Next Green in Just Minutes. The trailer has many other uses in and around the golf course. Two greens mowers easily fit on the trailer.

MODELS 09060 & 09061

With Two, 10-3/4” Oscillating Rolls, both driven for positive traction and Articulating Steering, the Salsco Greens Roller has proven itself to be an invaluable tool for many jobs, besides rolling greens. Greens Speed can be increased to 1-1/2’ or more, Without compaction, Without changing undulations, and Without burn marks from slipping. The Salsco Roller can easily be unloaded or loaded from anywhere around the green, thereby Direction of Rolling can be changed as desired.

The Salsco Greens Rollers, Gas or Electric are the #1 Preferred Rollers, around the world, since 1992!

The optional Spiker-Air Kit, Brush Kit or Tournament Roll Kit, are available, to improve the Versatility of the Salsco Rollers, Gas or Electric!

A Light Kit is available for the Gas Greens Roller for early morning rolling. (The Light Kit is Standard on the Electric Roller) Also available as an option, is the 9HP Electric Start Honda Engine!

SPIKER-AIR KIT

BRUSH KIT

TOURNAMENT ROLL KIT

GAS GREENS ROLLER - SPECIFICATIONS

ENG. OPTIONS: HONDA, 8HP, pull start, (MODEL 09060) or HONDA, 9HP electric start. (MODEL 09061) Gasoline - 5 gallon fuel capacity. Controls - On/Off Switch, choke & fuel.

SEAT: Molded cushion with protective edge trim.

TRACTIONDRIVE: Hydraulic pump to 2 hydrostats - 1 to Each Roll. Two drive motors, one hydraulic pump. Five (5) gallon hydraulic oil capacity.

ROLLERS: Two (2) oscillating rollers, both driven for positive traction. Diameter - 10-3/4”, Width - 36” with beveled ends, and scrappers.

BRAKES: Hydrostatic

STEERINGSYSTEM: Both rolls oscillate and articulate to smooth the surface without changing the undulations designed into the green.

SPEED: 0 - 5.4 Miles Per Hour.

CLIMBINGTRACTION: Up to 40° COMPACTION: Without water - 4.2 lbs. P.S.I. With water added to rolls - Adds 200 lbs. or 1.4 P.S.I.

DIMENSIONS: Length - 40”. Width - 40” Height - 47”. Weight - 610 lbs.

TRANSPORTTRAILER: Width - 46” I.D., Length - 42-1/2” I.D. (with tailgate up - not including tongue). Dual lock latch tailgate ramp. Jack stand with swivel wheel. Height - 10” (side rails). Hitch height - 16”. Weight - 197 lbs. Rubber strips - Two (2) 1/4” x 6” x 68”, Tires - 5.30 x 4.50-6. Spindle welded to angle iron axle.

PAINT: Polyester powder coated baked enamel - Orange

OPTIONS: Brush Kit, Tournament Roll Kit, Light Kit, Spiker-Air Kit.

WARRANTY: 5-YEAR WARRANTY on all Salsco manufactured parts

Specifications & options, subject to change without notice. (Rev. 3/06)

MAHOPAC G.C.MANASQUAN RIVER G.C.MANATEE COVE G.C.MANOR C.C.MEDFORD VILLAGE C.C.MENDHAM GOLF & TENNIS CLUBMERION G.C.METUCHEN G.C.MISQUAMICUT CLUBMISQUAMICUT CLUBMONTAMMY G.C.MOORESVILLE G.C.MORRIS COUNTY, C.C.MOUNTAIN RIDGE C.C.NANTUCKET G.C.NAPLES NATIONAL G.C.NASHAWTUC C.C.NAVESINK C.C.NEW YORK C.C.NOB NORTH G.C.NORTH HILLS C.C.OCEAN REEFOLD CAROLINA G.C.OLD MEMORIAL G.C.OLDE FLORIDA G.C.ONEX INTERNATIONALOZAUKEE C.C.PABLO CREEK CLUBPANTHER VALLEY G & C.C.PENNINSULA CLUBPETE DYE G.C.PINE TREE G.C.PINE VALLEY G.C.PINE VALLEY GOLF CLUBPIQUA COUNTRY CLUBPITTSBURGH FIELD CLUBPLAINFIELD C.C.PONTE VEDRA INN & C.C.PRESTONWOOD C.C.QUAIL HOLLOW C.C.QUAIL RIDGE G.C.QUAIL WEST G & C.C.QUEENSTOWN HARBOR GOLF LINKSRAIN TREE C.C.RAPID TURFREDTAIL G.C.REGENT PARK C.C.REND LAKE G.C.RESERVE GOLF & TOURNAMENT CLUBRIDGEWOOD C.C.RIO MAR C.C.RIVER FOREST C.C.RIVER RUN GOLF & C.C.RIVERVALE C.C.ROCKLAND GOLF CLUBROSEDALE G.C.ROUND HILL CLUB, INC.SAILFISH POINT G.C.SAKONNET C.C.SAMOSET RESORT G.C.SAN JOSE C.C.SAND RIDGE G.C.SCRATCH G.C.SETTINGDOWN CREEK G.C.SEVEN HILLS G.C.SEWICKLEY HEIGHTS C.C.SHARON C.C.SILVER CREEK PLANTATIONSOMERSET HILLS C.C.SOUTH HILLS C.C.SOUTHERNESS G.C.SPARTANBURG C.C.SPRING BROOK, C.C.SPRING HILL G. & C.C.ST. ANDREWS EAST G. & C.C.ST. CLAIR C.C.ST. MARLO C.C.STOWE ACRES C.C.SUNSET VALLEY G.C.SWAIN POINT YEACH & C.C.TAM O’SHANTER GOLF COURSE OF PATHE CLUB AT NEVILLEWOODTHE FALLS C.C.THE FARM G.C.THE GATES OF MARKHAM GOLF CLUBTHE HONORS COURSETHE LANDINGS CLUBTHE LEGACY GOLF CLUBTHE STANDARD CLUBTHE VIRGINIAN GOLF CLUBTHORNBLADE C.C.TITLELIST FOOTJOY WILDWOODTOM’S SOD SERVICETOURNAMENT PLAYERS CLUBTPC at SUGAR LOAFTUMBLEBROOK C.C.TURF CONCEPTSTURNBERRY ISLE RESORTTURTLE POINT YACHT & C.C.ULEN COUNTRY CLUBUNIVERSITY CLUBVALLEY BROOK C.C.WALNUT GROVE C.C.WALT DISNEY WORLD CO.WESTMORELAND C.C.WETHERSFIELD C.C.WHEELING PARK COMM.wHITFORD C.C.WILDCAT CLIFFS C.C.WILDCAT RUNWILLIAMS,C.C.WILLIAMSPORT C.C.WILLOW CREEK G.C.WILMINGTON C.C.WOLFERTS ROOST C.C.WOODBRIDGE GOLF LINKSWOODLOCK SPRINGS C.C.WOODMERE C.C.

ANDREWS SODDING & LAWNANGUS GLEN GOLF CLUASHBOURNE C.C.ATLANTA C.C.ATLANTIS G.C.AVON C.C.BALLENTYNE C.C.BALTIMORE MUNICIPAL GOLF CORP.BALTUSROL G.C.BEACON HALL GOLF & C.C.BELVEDERE PLANTATIONBENT PINE C.C.BENTWATER COUNTRY CLUBBIDERMANN G.C.BIG CANOE G.C.BOCA GROVE PLANTATIONBONITA BAY C.C.BONITA BAY CLUBBONNET CREEK G.C.BRAEBURN C.C.BROOK LAKE C.C.BUTLER C.C.CAMARGO CLUBCAMELOT G. & C.C.CANOE BROOK C.C.CAROLINA C.C.CHAMPION HILLS C.C.CHAMPIONS CLUB OF GWINETTCHARLOTTE C.C.CHARTIERS C.C.CHATTANOOGA G. & C.C.CHURCHILL VALLEY C.C.CINCINNATI C.C.CITY OF CORAL GABLESCLIFFS AT GLASSY MTN.CLUB DE GOLF de ST. HYACINTHECLUB DE GOLF ILESMERE, INC.CLUB DE GOLF LAVAL SUR LA LACCLUB DE GOLF LE MIRAGECLUB DE GOLF SOREL-TRACYCLUB MEDCOHASSET G.C.COLIN BOYD TURFCOLLIERS RESERVE C.C.COLONIAL C.C.COLONIAL C.C.COLUMBIA C.C.CORAL RIDGECOUNTRY CLUB OF ASHEVILLECOUNTRY CLUB OF BUFFALOCOUNTRY CLUB OF WATERBURYCOVERED BRIDGE G.C.COWANS FORD C.C.CROOKED CREEK G.C.CROSSWINDS PAR 3CRUZ CONSTRUCTION CO.CYPRESS KNOLL G.C.DEERHURST RESORTSDELLWOOD C.C.DETROIT GOLF CLUBDIAMOND RUN G.C.DISCOVER BAY GOLF CLUBDONALDA CLUBEASTON C.C.EDGEWOOD C.C.ELIZABETH MANOR GOLF & C.C.ELKVIEW C.C.EMERALD HILLS G.C.ENVIRONMENTAL LANDSCAPINGESSEX COUNTY C.C.ESSEX FELLS C.C.FAIRMOUNT C.CFALLS C.C.FOREST HILL FIELD CLUBFOX RUN GOLF COURSEFOXFIRE G.C.FRENCHMEN’S CREEK C.C.GASTON C.C.GLEN ABBEY GOLF CLUBGLEN KERNAN G.C.GOLF DE BEAUCEGOLF LOT BINIEREGOLF VENTURESGREEN BROOK C.C.GREEN VALLEY C.C.GREENVILLE C.C.GREY OAKS C.C.GREYSTONE GOLF CLUBHACKENSACK G.C.HAMMOCK DUNES LINKSHARTFORD NAT’L G.C.HAWORTH C.C.HICKORY HEIGHTS G.C.HIGHLAND C.C.HOLE IN THE WALL G.C.HOLLYWOOD, C.C.HOLSTON HILLSHOLSTON HILLS C.C.HOP MEADOW C.C.HORSESHOE BEND G.C.HUNTINGTON C.C.INDIAN HILLS G.C.INDIAN SPRING C.C.INDIANWOOD GOLF & C.C.ITT PALM COASTJOHN’S ISLAND C.C.JOHN’S ISLAND CLUBJOHNSON CITY C.C.JUPITER HILLSJUPITER ISLANDLAKE REGION YACHT & C.C. LAKEVIEW DEVEL. CORP.LANIER G.C.LEHIGH C.CLINWOOD SPRINGSLITTLE MILL C.C.LONE PALM C.C.LONG VUE C.C.LOST GROVE/DBA SOUTHERN DUNE

105 School House RoadCheshire, CT 06410 U.S.A.800-872-5726, 203-271-1682, 203-271-2596 (Fax)[email protected], www.salsco.com

MANUFACTURER OF OUTDOOR POWER EQUIPMENTProducts for Turf & Lawncare, Rental, Construction, Tree care, Wood Processing, Nursery & Farm IndustriesOther Salsco Equipment:

3-1/2” - 18”, Gas, Diesel, and P.T.O, Wood/Brush ChippersChipper Shredder Vacuum, Tailgate & Truckloader

Vacuums up to 65 HP

ChipperModels 6235B & 6235BXT

Gravity or Hydraulic Feed


The Model 6235B and 6235BXT are both 6” Round Wood Capacity chippers. The 6235B is a gravity feed unit and the 6235BXT is a hydraulic feed chipper. Both units utilize a 35HP Briggs and Stratton electric start gas engine. The infeed opening is 7” x 8”. The Tor-Flex axle provides a smooth, quiet ride

and features an independent suspension.

The impeller housing opens easily for access to the chip blades. Cast iron, greasable, self-centering bearings on the impeller shaft. The bed knife is adjustable, sharpen-able, and reversible.

360 Degree Exhaust easily adjusts to direct debris exhaust without tools. The exhaust flap also adjusts without any tools.

Debris curtains help to protect the opera-tor from blow back. The infeed to the impeller is 7” High x 8” Wide. Tor-Flex Axle provides easy quiet towing over the road. Heavy duty fenders with light enclosures and full D.O.T. light package are standard.

MADE INTHE U.S.A

Specifications & Options Subject to Change Without Notice REV. 1/2013MANUFACTURER OF OUTDOOR POWER EQUIPMENTProducts for Turf & Lawncare, Rental, Construction, Tree Care, Wood Processing, Nursery & Farm IndustriesOther Salsco Equipment

3-1/2” - 18” Capacity, Gas, Diesel, & P.T.O., Wood/Brush ChippersChipper Shredder Vacuums - Tailgate & Truckloader Vacuums

Shaving Mills from 9 cu. yds. - 50 cu. yds. Per Hour, Electric, P.T.O. & Diesel PoweredGas & Electric Greens Rollers - Bale Wrappers & Bale Handlers

105 School House RoadCheshire, CT 06410 U.S.A.800-872-5726 (Toll Free), 203-271-1682, 203-271-2596 (Fax)www.salsco.com, [email protected] (email)

SPECIFICATIONS - MODEL 6235BXT - HYDRUALIC FEED

ENGINE: 35HP Briggs & Stratton, Electric Start, Gas Engine.

FUEL TANK: 6 Gallon, Carbon Canister Fuel Tank.BATTERY: 12 Volt, CCA650, Automotive type.CLUTCH & BELT: Centrifugal Clutch, Triple band cogged V-Belt.INFEED CHUTE: 24” x 29” Opening at the outer edge of the infeed tray.INFEED OPENING: “7” x 8” Opening to Dual infeed rolls. Infeed handle is easily accessible from either side of unit. INFEED ROLLS: Quantity - 2. 12” long x 5-1/2” diameter, weighted, replaceable blades, fully welded.CHIPPER DISC HOUSING: 7 Gauge thick steel impeller housing is vented to provide more air flow for chip exhaust.CHIPPER DISC: 1” Thick x 29” Diameter, 6-welded and gusseted exhaust paddles, fully balanced. 210 lbs.CHIPPER BLADES: Qty. 6 - 1/2” thick x 4” long x 4” wide, double edge chip blades.BEARINGS: 4-Bolt, Heavy Duty, cast iron, greaseable & self centering.BED KNIFE: 1/2” Thick Steel, replaceable, sharpenable & adjustable.”EXHAUST CHUTE: 360-degree Swivel Exhaust, 11 gauge steel, no tools necessary to adjust. Easy adjust exhaust flap.HYDRAULIC COMPONENTS: Hoses-2,500 PSI Operating & 10,000 PSI burst. (2) Motors - 23.8 dis. (1) 6 G.P.M. Pump.TRAILER FRAME & TONGUE: 7 gauge steel frame, fully welded and gusseted for strength. Top Wind 2,000 lb. Jack, 2” Ball Coupler.AXLE & WHEELS: 2,200 lb. capacity, Tor-Flex Axle, ST205/75R14 Tires, D.O.T. Light Package.OPTIONS: Speed SensingGUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.DIMENSIONS: Length: 11’ Width: 5’6” Height: 6’9” Weight: 1640 lbs.

SPECIFICATIONS - MODEL 6235B - GRAVITY FEEDENGINE: 35HP Briggs & Stratton, Electric Start, Gas Engine.FUEL TANK: 6 Gallon, Carbon Canister Fuel Tank.BATTERY: 12V. Automotive TypeCLUTCH & BELT: Centrifugal Clutch, Triple band cogged V-Belt.INFEED CHUTE: 24” x 29” Opening at the outer edge of the infeed tray.INFEED OPENING: 7” x 8” Opening to the chipper disc.CHIPPER DISC HOUSING: 7 Gauge thick steel impeller housing is vented to provide more air flow for chip exhaust.CHIPPER DISC: 1” Thick x 29” Diameter, 6-welded and gusseted exhaust paddles, fully balanced. 210 lbs.CHIPPER BLADES: Qty. 6 - 1/2” thick x 4” long x 4” wide, double edge chip blades.BEARINGS: 4-Bolt, Heavy Duty, cast iron, greaseable & self centering.BED KNIFE: 1/2” Thick Steel, replaceable, sharpenable & adjustable.EXHAUST CHUTE: 360-degree Swivel Exhaust, 11 gauge steel, no tools necessary to adjust. Easy adjust exhaust flap.TRAILER FRAME & TONGUE: 7 gauge steel frame, fully welded and gusseted for strength. Top Wind 2,000 lb. Jack, 2” Ball Coupler.AXLE & WHEELS: 2,200 lb. capacity, Tor-Flex Axle, ST205/75R14 Tires, D.O.T. Light Package.GUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.DIMENSIONS: “Length:11’ Width: 5’6” Height: 6’9” Weight:1490 lbs.

Chipper, PTO - Model 627XT6” Capacity

Only 25HP Required @ the PTO!


The Model 627XT, is a 6” capacity chipper with a large 7” x 8” infeed opening. This unit utilizes, 1/2” thick x 4” long, x 4” wide, double edge chip blades and a 1/2” thick, reversible, sharpen-able, and replaceable bed knife, for consistent chip size and chipping capabilities of even those small, viney, stringy, and messy jobs! 360 degree

Exhaust Chute, and East Adjust Exhaust Flap. No tools are required to adjust either one. Dual infeed rolls, and adjust-able infeed speed help to prevent clogging & wrapping. Bolted swing away infeed allows easy access to feed rolls.

Optional Speed Sensing automati-cally monitors impeller RPM and stops infeed to allow RPM recovery.

7” x 8” infeed opening to Dual Infeed Rolls. Extra wide Fold Down Infeed Pan, is 75” from infeed rolls to edge of pan.

The infeed handle is easily acces-sible from either side of the unit, and has a full Reverse, Neutral, Slow and Fast Speed.

The standard Flow Control Valve provides infinite speed control to accommodate all tractors.

MADE INTHE U.S.A

Specifications & Options Subject to Change Without Notice

REV. 1/2013

MANUFACTURER OF OUTDOOR POWER EQUIPMENTProducts for Turf & Lawncare, Rental, Construction, Tree Care, Wood Processing, Nursery & Farm IndustriesOther Salsco Equipment


Shaving Mills from 14 yds. - 48 yds Per Hour, Electric & Diesel PoweredGas & Electric Greens Rollers - Bale Wrappers & Bale Handlers


INFEED CHUTE: 24” x 29” Opening at the infeed handle.INFEED OPENING: 7” x 8” Opening to Dual infeed rolls. Extra wide Fold Down Infeed Pan,

75” from infeed rolls. Infeed handle is easily accessible from either side of unit. (Reverse/Neutral/Slow/Fast)

INFEED ROLLS: Quantity - 2. 12” long x 5-1/2” diameter, weighted, replaceable blades, fully welded.

CHIPPER DISC HOUSING: 7 Gauge thick steel impeller housing is vented to provide more air flow for chip exhaust.

CHIPPER DISC: 1” Thick x 29” Diameter, 3-welded and gusseted exhaust paddles, fully balanced. 210 Lbs.

CHIPPER BLADES: Qty. 6 - 1/2” thick x 4” long x 4” wide, double edge chip blades.BED KNIFE: 1/2” Thick Steel, replaceable, sharpenable & adjustable.EXHAUST CHUTE: 360-degree Swivel Exhaust, 11 gauge steel, no tools necessary to adjust.PTO SHAFT & COVER: Heavy duty PTO Shaft & Cover, standard equipment.HITCH: 3-Point Hitch, Category IHYDRAULIC COMPONENTS: Hoses-2,500 PSI Operating & 10,000 PSI burst. Motor - 23.8 displace-

ment for easy connection to tractor remotes.FRAME: 7 gauge steel frame, fully welded and gusseted for strength.BEARINGS: 4-Bolt, Heavy Duty, cast iron, greaseable & self centering.OPTIONS: Speed SensingGUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.PAINT: Orange, Polyester Powder Coat Paint Provides Excellent Outdoor Weath-

erability and Offers Protection Against Ultra Violet Discoloration. All Parts Painted Separately.

DIMENSIONS: Length:64” Width:64” Height:86” to top of discharge. Weight: 1303-lbs.

SPECIFICATIONS/FEATURES - MODEL 627XT, PTO CHIPPER

CHIPPER, 413H/416B4-1/2” Capacity

Small - Tough - Productive!


Both the 416B and the 413H are compact, easy to transport, built tough and will easily chip branches & round wood up to 4-1/2” in diameter. The extra wide hopper means less pruning and trimming and the 360 degree exhaust allows the operator to discharge chips either into the tow vehicle or into the woods. No tools are nec-essary to adjust the chip deflector or the direction of chip exhaust!

1/2” thick, steel bed knife:Replaceable!Sharpenable!Adjustable!

Pictured is the 360 degree exhaust chute with adjustable exhaust deflector.

Pictured is the extra wide hopper and the 5” x 5” infeed opening. Plastic strips are installed to help protect the operator from blow back of material. (Plastic strips are not shown)

MADE INTHE U.S.A

Specifications & Options Subject to Change Without Notice REV. 01/2013



Shaving Mills from 14 yds. - 48 yds Per Hour, Electric, P.T.O. & Diesel PoweredGas & Electric Greens Rollers - Bale Wrappers & Bale Handlers


SPECIFICATIONS - MODELS 413H & 416B

INFEED CHUTE: 22-1/4” x 22-1/4”. Plastic strips for safety.INFEED OPENING: 5” x 5”EXHAUST CHUTE: 360-degree swivel chute with adjustable chip deflector. No tools

necessary for adjustment.CHIPPER DISC: 22-1/8” diameter x 3/4” thick. Approximately 135 lbs.CHIPPER DISC HOUSING: 7-Gauge thick steel impeller housing is vented to provide more air

flow for chip exhaust.CHIPPER BLADES: 1/2” thick x 4” wide x 7-1/4” long. Hardened & double sided. Qty.

2BED KNIFE: Replaceable, sharpenable, adjustable - 1/2” thick steel.FRAME: 7 Gauge steel frame, fully gusseted for strength.AXLE: Torflex - 1,000-lb. capacity torsion axle.TIRE/WHEEL ASSEMBLIES: 18.5 x 8.5-8, LR C, 940 Lb. capacity.TONGUE: 2” x 3” x 1/4” Wall, rectangular steel tube.HITCH: 2” ball coupler, safety chains.JACK: 2,000 lb. capacity, top wind jack.BEARINGS: Heavy duty, cast iron, greaseable & self centering.BATTERY: 12 volt automotive type.CLUTCH: Centrifugal clutch, 1” bore, 2-groove.GUARDS/DECALS: All moving parts guarded. Full set of safety decals.PAINT: Orange, Polyester Powder Coat Paint provides excellent outdoor

weatherability and offers protection against ultra violet discolor-ation. All parts painted separately.

OPTIONS: 13 HP Honda, Electric Start. 16 HP Briggs & Stratton Vanguard, Electric Start.Trailer light package with heavy duty fenders.

DIMENSIONS: Length:102”, Width:60”, Height:75” to top of discharge, Weight: 860 Lbs.

Chipper, PTO - Model 6210XT10” Capacity

Only 35HP Required @ the PTO!


The Model 6210XT, is a 10” capacity chipper with a large 10” x 14” infeed opening. Upper feed roll assembly (pictured below) raises to accommodate branches & limbs up to 10” in diameter. The infeed tray lowers to a full 40” distance from the feed rolls for extra safety when feeding the machine No tools are required to adjust the 360° exhaust chute and the easy adjust exhaust flap to direct chipped material where required. Dual feed rolls provide extra crushing power for large amount of brushy material. Easily accessed from either side of the infeed, the infinite speed infeed handle has a full reverse, for safety!

Nine (9) 1/2” thick, double-sided, chip blades, segmented into (3) knife pockets. Easy access to blades through 1/2” thick steel impeller housing. 1” thick x 42” diameter impeller, with (3) welded and gusseted paddles for better

chip discharge and air-flow. Impeller weighs 410 LBS.

Flow Control Valve (Standard Equipment) provides infinite speed control to accommo-date all tractors.

4 Bolt, cast iron, self align-ing, greaseable bearings! Replaceable, Sharpenable, Adjustable steel bed knife!

Optional Speed Sensing monitors impeller RPM and stops infeed to allow impeller RPM recovery. 540PTO RPM recom-mended.

MADE INTHE U.S.A

Specifications & Options Subject to Change Without Notice

REV. 1/2013



Shaving Mills from 14 yds. - 48 yds Per Hour, Electric & Diesel PoweredGas & Electric Greens Rollers - Bale Wrappers & Bale Handlers


SPECIFICATIONS & FEATURES MODEL 6210XT CHIPPER

FRAME: 7 gauge steel frame, fully welded and gusseted for strength.INFEED OPENING: 14” Wide x 10” High opening at the infeed rolls, in operating

position.INFEED CHUTE: 30” High x 31” Wide opening at the infeed handle. Fold

down infeed tray extends to 40” to infeed rolls.INFEED ROLLS: Quantity-2. 24” long x 5-1/2” diameter, weighted, replace-

able blades, fully welded.IMPELLER HOUSING: 7 Gauge thick steel impeller housing is vented to provide

more air flow for chip exhaust.IMPELLER: 1” Thick x 42” Diameter, 3-welded and gusseted exhaust

paddles, fully balanced. 410 LBS.CHIPPER BLADES: (9) 1/2” thick x 5-1/8” long, double sided, hardened steel.BED KNIFE: 1/2” Thick steel, replaceable, sharpenable, adjustable.EXHAUST CHUTE: 360 Degree Swivel Exhaust, 11 gauge steel, easy adjust

exhaust flap, no tools necessary to adjust.PTO SHAFT & COVER: Heavy duty PTO Shaft & Cover, standard equipment.HYDRAULIC COMPONENTS: Hoses - 2,500 PSI operating & 10,000 PSI burst. Motor -

23.8 displacement.FLOW CONTROL VALVE: Hydraulic Oil Control Valve, standard equipment.BEARINGS: Heavy duty, cast iron, greaseable & self centering.OPTIONS: Speed Sensing.GUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.PAINT: Orange, Polyester Powder Coat Paint Provides Excellent

Outdoor Weatherability and Offers Protection Against Ultra Violet Discoloration. All Parts Painted Separately.

DIMENSIONS: Length: 94” (Infeed tray in up position)Width: 61”Height: 81” - to top of dischargeWeight: 1,965-lbs.

ChipperModels 6235B & 6235BXT

Gravity or Hydraulic Feed


The Model 6235B and 6235BXT are both 6” Round Wood Capacity chippers. The 6235B is a gravity feed unit and the 6235BXT is a hydraulic feed chipper. Both units utilize a 35HP Briggs and Stratton electric start gas engine. The infeed opening is 7” x 8”. The Tor-Flex axle provides a smooth, quiet ride

and features an independent suspension.

The impeller housing opens easily for access to the chip blades. Cast iron, greasable, self-centering bearings on the impeller shaft. The bed knife is adjustable, sharpen-able, and reversible.

360 Degree Exhaust easily adjusts to direct debris exhaust without tools. The exhaust flap also adjusts without any tools.

Debris curtains help to protect the opera-tor from blow back. The infeed to the impeller is 7” High x 8” Wide. Tor-Flex Axle provides easy quiet towing over the road. Heavy duty fenders with light enclosures and full D.O.T. light package are standard.

MADE INTHE U.S.A

Specifications & Options Subject to Change Without Notice REV. 1/2013MANUFACTURER OF OUTDOOR POWER EQUIPMENTProducts for Turf & Lawncare, Rental, Construction, Tree Care, Wood Processing, Nursery & Farm IndustriesOther Salsco Equipment


Shaving Mills from 9 cu. yds. - 50 cu. yds. Per Hour, Electric, P.T.O. & Diesel PoweredGas & Electric Greens Rollers - Bale Wrappers & Bale Handlers


SPECIFICATIONS - MODEL 6235BXT - HYDRUALIC FEED

ENGINE: 35HP Briggs & Stratton, Electric Start, Gas Engine.

FUEL TANK: 6 Gallon, Carbon Canister Fuel Tank.BATTERY: 12 Volt, CCA650, Automotive type.CLUTCH & BELT: Centrifugal Clutch, Triple band cogged V-Belt.INFEED CHUTE: 24” x 29” Opening at the outer edge of the infeed tray.INFEED OPENING: “7” x 8” Opening to Dual infeed rolls. Infeed handle is easily accessible from either side of unit. INFEED ROLLS: Quantity - 2. 12” long x 5-1/2” diameter, weighted, replaceable blades, fully welded.CHIPPER DISC HOUSING: 7 Gauge thick steel impeller housing is vented to provide more air flow for chip exhaust.CHIPPER DISC: 1” Thick x 29” Diameter, 6-welded and gusseted exhaust paddles, fully balanced. 210 lbs.CHIPPER BLADES: Qty. 6 - 1/2” thick x 4” long x 4” wide, double edge chip blades.BEARINGS: 4-Bolt, Heavy Duty, cast iron, greaseable & self centering.BED KNIFE: 1/2” Thick Steel, replaceable, sharpenable & adjustable.”EXHAUST CHUTE: 360-degree Swivel Exhaust, 11 gauge steel, no tools necessary to adjust. Easy adjust exhaust flap.HYDRAULIC COMPONENTS: Hoses-2,500 PSI Operating & 10,000 PSI burst. (2) Motors - 23.8 dis. (1) 6 G.P.M. Pump.TRAILER FRAME & TONGUE: 7 gauge steel frame, fully welded and gusseted for strength. Top Wind 2,000 lb. Jack, 2” Ball Coupler.AXLE & WHEELS: 2,200 lb. capacity, Tor-Flex Axle, ST205/75R14 Tires, D.O.T. Light Package.OPTIONS: Speed SensingGUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.DIMENSIONS: Length: 11’ Width: 5’6” Height: 6’9” Weight: 1640 lbs.

SPECIFICATIONS - MODEL 6235B - GRAVITY FEEDENGINE: 35HP Briggs & Stratton, Electric Start, Gas Engine.FUEL TANK: 6 Gallon, Carbon Canister Fuel Tank.BATTERY: 12V. Automotive TypeCLUTCH & BELT: Centrifugal Clutch, Triple band cogged V-Belt.INFEED CHUTE: 24” x 29” Opening at the outer edge of the infeed tray.INFEED OPENING: 7” x 8” Opening to the chipper disc.CHIPPER DISC HOUSING: 7 Gauge thick steel impeller housing is vented to provide more air flow for chip exhaust.CHIPPER DISC: 1” Thick x 29” Diameter, 6-welded and gusseted exhaust paddles, fully balanced. 210 lbs.CHIPPER BLADES: Qty. 6 - 1/2” thick x 4” long x 4” wide, double edge chip blades.BEARINGS: 4-Bolt, Heavy Duty, cast iron, greaseable & self centering.BED KNIFE: 1/2” Thick Steel, replaceable, sharpenable & adjustable.EXHAUST CHUTE: 360-degree Swivel Exhaust, 11 gauge steel, no tools necessary to adjust. Easy adjust exhaust flap.TRAILER FRAME & TONGUE: 7 gauge steel frame, fully welded and gusseted for strength. Top Wind 2,000 lb. Jack, 2” Ball Coupler.AXLE & WHEELS: 2,200 lb. capacity, Tor-Flex Axle, ST205/75R14 Tires, D.O.T. Light Package.GUARDS/DECALS: All Moving Parts Guarded. Full Set of Safety Decals.DIMENSIONS: “Length:11’ Width: 5’6” Height: 6’9” Weight:1490 lbs.

Gas Greens Roller › wzukusers › user-34624692 › ... · 2019-01-02 · Gas Greens Roller The...

Documents

Transcript of Gas Greens Roller › wzukusers › user-34624692 › ... · 2019-01-02 · Gas Greens Roller The...