Garmin nuvi 2460 LMT Speaker Replacement nuvi 2460 LMT Speaker Replacement This guide will allow you...
Transcript of Garmin nuvi 2460 LMT Speaker Replacement nuvi 2460 LMT Speaker Replacement This guide will allow you...
Garmin nuvi 2460 LMT Speaker ReplacementThis guide will allow you to replace a faulty or defective speaker.
Geschrieben von: Ricardo Audain
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 1 von 6
WERKZEUGE:T10 Torx Screwdriver (1)
Tweezers (1)
iFixit Opening Tools (1)
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 2 von 6
Schritt 1 — Back Cover
Locate the four screws in the fourcorners of the back panel.
Schritt 2
Using a T5 Torx Screwdriver, beginunscrewing the four 11.0 mmscrews from the back panel.
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 3 von 6
Schritt 3
Using a plastic opening tool orsimilar object, find the groove in theside of the device and begin pryingopen the back panel. Work the toolaround the entire panel until it popsoff.
Schritt 4
Lift the beige clamp using a tweezeror your fingernail and remove theconnector.
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 4 von 6
Schritt 5
Lift the connector gently from thesocket.
Schritt 6 — Speaker
Lift and separate the speakerconnector cable using a pair oftweezers.
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 5 von 6
To reassemble your device, follow these instructions in reverse order.
Dieses Dokument wurde zuletzt angelegt am 2017-11-29 10:14:22 PM.
Schritt 7
Gently lift the speaker out of theback cover using a plastic openingtool.
Apply force as needed if there isglue holding the speaker in place.
Garmin nuvi 2460 LMT Speaker Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 6 von 6