Garam KimGraduate Student » kim1652@purdue.edu » 319-400-9760

https://www.purdue.edu/cmsc/

purd

ue.e

du/c

msc BIO

Purdue UniversityM.S. Aviation & Aerospace Management, May 2017

Purdue UniversityB.S. Aeronautical Engineering Technology, May 2015

ACTIVITYPurdue University Korean Undergraduate Students Association, May 2014-May 2015

EXPERIENCE Indiana Manufacturing Institute, West Lafayette, INGraduate Research Assistant, May 2016–Current

» Manufactured various composite test sample, including carbon

fiber, fiberglass, honeycomb and so on.

» Operated different kinds of machines, such as CNC, water jet,

Cutting table and so on.

» Designed and manufactured various composite parts for the

company project.

» Designed the composite related tests and manufactured the

fixtures which are needed for the tests.

Purdue University, Teaching Assistant-Advanced Composite Laboratory, 2014–Current

» Demonstrated student to layup prepreg material

» Demonstrated the correct procedures for VARTM’s and wet

layup

» Helped students to bag their parts and cure it

» Took care of students to ensure using sanding and milling

machines properly

» Prepared prepreg plies and plies for VARTM for students

Purdue UniversityResearch Assistant-Advanced Composite Laboratory, 2014–2016

» Created various kind of carbon fiber samples for many

different tests

» Manufactured Purdue Pete head and helmet, the mascot of

Purdue University, using composite materials

» Build several molds for prepreg and wet layup by using 3-axis

and 5-axis CNC machines

Purdue UniversityAircraft Technician Assistant-Hangar 6, 2014

» Cleaned and polished inside and outside of the aircraft

» Maintained and kept hangar clean

» Assisted technician to perform aircraft maintenance

Figure 1. Composite part manufacturing

Figure 2. Composite Test specimen manufacturing and testing

Purdue University » Composites Manufacturing & Simulation Center