GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY · 2018-06-06 · 2 Indeterminate...

GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY

TEACHING AND EXAMINATION SCHEME

Programme Bachelor of Technology Branch/Spec. Civil Engineering

Semester V

Effective from Academic Year2016-17 Effective for the batch Admitted inJuly 2014

Subject Code

Subject Name

Teaching scheme Examination scheme (Marks) Credit Hours (per week) Theory Practical

Lecture(DT) Practical(Lab.) Lecture(DT) Practical(Lab.) CE SEE Total CE SEE Total

L TU Total P TW Total L TU Total P TW Total 2CI501 Structural Analysis - II 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI502 Hydrology and Water resources Engineering

3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI503 Geotechnical Engineering 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI504 Elements of Structural Design 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI505 Environmental Engineering-I 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI506 Building Services 3 0 3 0 0 0 3 0 3 0 0 0 40 60 100 0 0 0

2HS501 Aptitude Skill Building-I 0 0 0 1 0 1 0 0 0 2 0 2 0 0 0 35 15 50

Total 18 0 18 6 0 6 18 0 18 12 0 12 240 360 600 210 90 300

GANPAT UNIVERSITY

FACULTY OF ENGINEERING & TECHNOLOGY TEACHING AND EXAMINATION SCHEME

Programme Bachelor of Technology Branch/Spec. Civil Engineering Semester VI

Effective from Academic Year2016-17 Effective for the batch Admitted inJuly 2014

Subject Code

Subject Name

Teaching scheme Examination scheme (Marks) Credit Hours (per week) Theory Practical

Lecture(DT) Practical(Lab.) Lecture(DT) Practical(Lab.) CE SEE Total CE SEE Total

L TU Total P TW Total L TU Total P TW Total

2CI601 Design of Steel Structure 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI602 Advanced Surveying 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI603 Foundation Engineering 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI604 Estimating & Costing 2 0 2 2 0 2 2 0 2 4 0 4 40 60 100 35 15 50

2CI605 Environmental Engineering-II 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 35 15 50

2CI606 Seminar 0 0 0 1 0 1 0 0 0 2 0 2 0 0 0 35 15 50

2HS601 Aptitude Skill Building-II 0 0 0 1 0 1 0 0 0 2 0 2 0 0 0 35 15 50

Total 14 0 14 8 0 8 14 0 14 16 0 16 200 300 500 245 105 350

GANPAT UNIVERSITY

FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/Spec. CIVIL Engineering

Semester V Version 2.0.0.0

Effective from Academic Year 2016-17 Effective for the batch Admitted in 2014-2015

Subject code 2CI 501 Subject Name STRUCTURAL ANALYSIS – II

Teaching scheme Examination scheme (Marks)

(Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total

L TU P TW

Credit 3 1 4 Theory 40 60 100

Hours 3 2 5 Practical 35 15 50

Pre-requisites:

STRUCTURAL ANALYSIS – I

Learning Outcome:

After completion of this subject students are able to understand the behaviour like displacement and

deformation of structural member under various loading. Students can get knowledge of behaviour of structural

member under moving load on it. They also get knowledge of curved structure.

Theory syllabus

Unit Content Hrs

1 Displacement Methods:

Analysis of continuous beams & plane frames for various loading including settlement/ rotation

of support by slope deflection method, Moment distribution method including sway, use of

symmetry of structure up to two storeyed / two bay frames.

8

2 Indeterminate Structures(All types)

Static, kinetics and kinematics indeterminacy.

4

3 Matrix Methods:

Analysis of indeterminate plane trusses, beams and frames by matrix flexibility and stiffness

methods using system approach. Application of computer for analysis of various structures

8

4 Curved Structures:

Domes-spherical & conical, longitudinal and hoop stresses.

4

5 Kani’s Method :

Concept of method application to continuous beams & frames with sway.

6

6 Prestressed Concrete :

Introduction , properties of high strength materials, methods of prestressing, pre tensioning &

post tensioning, losses in Prestressed concrete, analysis of section for flexure.

6

Practical content

Practical and Term work shall be based on the above mentioned course content.

Text Books

1 Junarkar S.B. ; Mechanics of Structures Vol. II ,Charotar Publication

2 Vazirani&Ratwani ; Analysis of Structures Vol. II, Published By Khanna Publication ,1978

3 B.C. Punmia; Strength of Materials & Theory of Structures Vol. II , NemChand Publication,1984

Reference Books

1 Wang C. K.; Intermediate Structural Analysis, Tata-McGraw Publicaton,1983.

2 Reddy C.S.; Basic Structural Analysis ,Tata- McGraw Publicaton,1981,1986

3 Gere & Weaver ; Matrix Analysis of Framed Structures, Van Nostrand Reinhold,1990

4 Wilbur J.B. and Norris C.R. : Elementary Structural Analysis, , McGraw Publicaton

5 Krishna Raju ; Prestressed Concrete ,Tata- McGraw Publicaton,1995

6 IS 1343 - Indian Standard code of Practice for Prestressed Concrete

GANPAT UNIVERSITY




Subject code 2CI502 Subject Name HYDROLOGY AND WATER RESOURCES

ENGINEERING



L TU P TW



Pre-requisites:

Learning Outcome:

After completion of the curriculum the students aware basic knowledge of water resources management. They

are understand basic of hydrology, rain gauge stations & measurement of rainfall, evaporation and

transpiration, runoff, hydrograph analysis, flood, ground water hydrology and simulation modelling.

Theory syllabus

Unit Content Hrs

1 Introduction:

The hydrologic cycle, history of hydrology, scope and application of hydrology,

importance of water resources.

4

2 Precipitation:

Types of precipitation, geographical distribution, time distribution, variability, measurement,

average depth over area, depth area duration.

6

3 Evaporation and Transpiration:

Factor affecting, measurement, evaporation in reservoirs, methods of prevention.

3

4 Infiltration:

Introduction,factor affecting, measurement.

3

5 Runoff :

Runoff process; relation of storm period and rainfall, factors affecting runoff methods of

computation; gauging runoff of stream; stage discharge relationships interpretation of stream

flow records.

4

6 Hydrograph Analysis:

Components of the hydrograph; Separation of base flow, components unit hydrographs,

S-hydrographs.

7

7 Floods:

Causes of floods, methods of estimation of floods. Design floods, damages, flood routing

through reservoirs, methods of flood control, flood forecasting and warning.

7

8 Groundwater Hydrology:

Occurrence and movement of groundwater, surface and subsurface investigation of groundwater,

flow through saturated porous medium.

5

9 Simulation Modelling:

Introduction, types, application in hydrology and water resources engineering.

2

Practical content


Text Books

1 Hydrology and Water Resources Engineering by S. K. Garg ,Khanna Publisher.

2 Engineering Hydrology - K. Subramanya, Tata McGrawHill Publication.

Reference Books

1 Watershed Hydrology by Peter E. Black, Hewis Publisher

2 Hydrology by H. M. Raghunath, New Age International Publisher

GANPAT UNIVERSITY




Subject code 2CI503 Subject Name GEOTECHNICAL ENGINEERING



L TU P TW



Pre-requisites:

CONSTRUCTION MATERIAL AND ENGINEERING GEOLOGY

Learning Outcome:

Upon successful completion of the subject Geotechnical Engineering students will have knowledge of soil, its

various types and properties. They will also have knowledge of permeability in soils, Stress distribution in soil,

Shear strength and compaction and consolidation properties of soil

Theory syllabus

Unit Content Hrs

1 Introduction:

Introduction of soil, basic soil properties, Mineralogy of Structures, Soil Mechanics, Origin and

formation of soils, Field identification of soils, Atterberg’s limits & soil classification, grain size

analysis

2

2 Permeability of Soils:

Permeability of soils, Darcy’s law, Lab tests of permeability, Factors affecting permeability,

Field permeability tests, Confined and unconfined aquifers, Permeability of stratified soils.

4

3 Stress Distribution in Soil :

Boussinesq's theory for distribution of pressure on a vertical plane and a horizontal plane

below ground surface due to vertical point load on the ground surface, isobar,

assumptions, comparison and limitations of Boussinesq’s theory & Westergaard theory. Stress

caused by loaded areas of different shapes, equivalent point load method, stresses due to

trapezoidal loads. New mark’s influence chart.

4

4 Shear Strength of Soil :

Mohr's strength theory, Mohr- coulomb's strength theory, Modified Mohr-coulomb's theory,

direct shear test, unconfined compression test, vane shear test, triaxial compression test, shear

6

tests based on drainage conditions.

5 Compaction :

Definition, theory of compaction, factors affecting compaction, laboratory compaction

tests, effect of compaction on soil properties, placement water content, placement layer

thickness, field control of compaction, Proctor's needle, methods of compaction used in

field.

6

6 Consolidation of Soils :

Compressibility of soils, definitions and mechanism of consolidation, spring analogy, void ratio

and effective stress relation, related indices, assumptions of Terzaghi’s one dimensional

consolidation theory, time factor, one dimensional consolidation tests, laboratory and theoretical

time curves, determination of pre-consolidation pressure, estimation of consolidation settlement

and rate of settlement for uniform pressure increment in a clay layer.

6

7 Earth Pressure:

Active and passive earth pressures due to level and uniform surcharged backfill for cohesion less

and cohesive soils using Rankine’s theory, earth pressure at rest, introduction to Coulomb’s

theory, limitations and differences of Rankine’s and Coulomb’s theory

5

8 Stability of Slopes:

Idealized condition used in the analysis, types of slope failures, infinite and finite slopes,

factor of safety, stability of infinite slopes, Fundamentals of conventional methods, Swedish

circle method , friction circle method, Taylor stability numbers, stability charts, effects of

seepage and non-homogeneity on the stability of slopes, factor of safety and soil parameters

for special cases such as end of construction, rapid (instantaneous)draw down, steady seepage,

Tension cracks.

5

Practical content


Text Books

1 Arora K.R.; Soil Mechanics & Foundation Engineering ,Standard Publisher

2 B.C.Punamia .; Soil Mechanics & Foundation Engineering ,Laxmi Publication

Reference Books

1 Murthy V.N.S.; Soil Mechanics & Foundation Engg Vol-.I, Geotechnical Engineering Series(GES)

2 Taylor D.W.; Fundamentals of Soil Mechanics Wiley, New York, 1948.

GANPAT UNIVERSITY




Subject code 2CI504 Subject Name ELEMENTS OF STRUCTURAL DESIGN



L TU P TW



Pre-requisites:

Learning Outcome:

After Completion of the curriculum of element of structural design, students can understand the different

methods for calculating the forces or moments of structural member. They get knowledge regarding how to

analysisand design different structural member like beam, column, slab and footing. Similarly in steel section

students can get knowledge of different cross section of steel and how to analyse tension member and

compression member, laterally supported beam and unsupported beam and also how to make suitable

connection for different structural components.

Theory syllabus

Unit Content Hrs

1 Loads &Reinforcement:

Indian standard specifications for dead, live and wind loads on buildings, wind loads on typical

roof trusses , Different types of reinforcement and their properties

1

2 Design Methods :

Various limit states, limit state design, ultimate load method, plastic design, general principles and

applicability.

1

3 Reinforced Concrete :

1) Reinforced Concrete Beams and Slabs:

a) Introduction to working stress method actual and critical (balanced neutral axis).Balanced,

under reinforced and over reinforced section, moment of resistance: singly and doubly

reinforced rectangular and flanged section.

b) Limit state method:

Safety and serviceability requirement. Limit state of serviceability.

Analysis and Design of rectangular and flanged (T & L) sections of beams. Singly and doubly

reinforced beams.

2) Design of One way and Two ways Simply Supported Slabs.

3)Limit State of Collapse:

Shear and Torsion: Design for shear reinforcements for beam.

19

4) Axially Loaded Reinforced Concrete Columns:

Longitudinal and transverse reinforcement load carrying capacity of short columns. Design of

reinforcements in columns.(uniaxial)

4 R.C. Column footings:

Axial loaded footings, critical sections for bending and shear. Shear and bending strength of

footings, design of axial isolated footings, square and rectangular shape.

4

5 Steel Structures :

Connections: Bolted & welded with gusset plate and lug angles.

7

6 Tension & Compression Members :

Design of Tension members & compression members.

7

Practical content


Text Books

1 Limit state theory &Design of Reinforced Concrete by Shah and Karve, Structure Publication.

2 Reinforced Concrete by H.J.Shah,Charotar Publishing House pvt. Ltd

3 Design of steel structures byDayratnam, S.Chand Publication.

4 IS CODES: IS-456, IS-800, IS-875, SP34

Reference Books

1 Design of Concrete Structure by A.K. Jain, Nem Chand & Bros.; Seventh edition (2012)

2 Design of steel structure by Arya & Ajmani, NEM CHAND & BROS; 2015 edition

3 Design of steel structure by Ramchandra, Scientific Publishers Journals Dept.

4 Reinforced concrete Design by S.N. Sinha, McGraw Hill Education (India) Private Limited;

5 Reinforced concrete by Syal and Gupta, S.Chand (G/L) & Company Ltd; Reprint Edition 2007 edition

6 Limit State Design by Dr. Ramchandra,, Scientific Publishers Journals Dept. (30 January 2010)

GANPAT UNIVERSITY




Subject code 2CI505 Subject Name ENVIRONMENTAL ENGINEERING –I



L TU P TW



Pre-requisites:

Learning Outcome:

After Completion of the curriculum students aware With the Basic Knowledge of water Supply Network

System. Also they are able tounderstand the basic parameters of the Water and Based on it they will design of

the various water treatment Units.

Theory syllabus

Unit Content Hrs

1 INTRODUCTION:

Water System, quality parameters and their significance for domestic usages, drinking water

standards, Intake Structure, Unit operation

1

2 WATER DEMAND AND COLLECTION:

Water demand , population forecasts, water quality requirements, sources and yields of sources

for water requirements, methods of water collections, issues and remedial measures of urban

water supply

1

3 WATER TREATMENT:

Need for water treatment, water treatment systems, design of treatment units such as aeration

unit, sedimentation, coagulation and flocculation, filtration, Disinfection, water softening and

removal methods for iron and manganese

19

4 WATER DISTRIBUTION SYSTEMS:

Pumps and pumping, Conveyance of water, Distribution of Water

4

5 PLANNING OF WATER SUPPLY PROJECT:

Data collection, project formulation, project drawings and cost estimation

7

6 RURAL WATER SUPPLY AND TREATMENT:

Water demand and treatment techniques for rural area, water problems and remedial measures

7

Practical content


Text Books

1 B.C.Punamia, “Water Supply Engineering”, LaxmiPubliction

2 S.K.Garg, “Water Supply Engineering”, Khanna Publication.

Reference Books

1 A. K. Jain (1997), “Water Supply and Water Treatment", Pub. Akalank's Pub., New Delhi

2 Davis and Cornwell, “Elements of Water Supply and Waste water Disposal", Pub. John Wiley & Sons,

New York.

3 G. M. Masters (1994), " Introduction to Environmental Engineering and Science", Pub. Prentice Hall of

India Pvt. Ltd. , New Delhi.

4 K. N. Duggal(1993), " Elements of Public Health Engineering", Pub. S. Chand & Co., New Delhi

5 Water supply and sanitary engineering – By G. S. Birdie,DhanpatRai Publishing Company (p) Ltd

6 McGhee, Terena J. , " Water Supply & Sewerage", 5th Edition, McGraw Hill International Edition, New

Delhi

GANPAT UNIVERSITY




Subject code 2CI506 Subject Name BUILDING SERVICES



L TU P TW

Credit 3 3 Theory 40 60 100

Hours 3 3 Practical

Pre-requisites:

Learning Outcome:

Upon successful completion of this course you will be able to:

• Identify building services equipment and explain its function

• Describe how building services are integrated into a building

• interpret building services drawings

• Explain how building services modify the indoor environment

• Determine how building performance and regulatory requirements affect the design and commissioning of

building services

• Explain how energy is supplied to and used in buildings and the impact of energy efficiency on the design of

sustainable buildings

Theory syllabus

Unit Content Hrs

1 Lighting Systems &Calculations

Types of Lighting, Operating of Light with their technical parameters, Light fixtures, LED type

Lights, Lux and Lumens calculation, Lamp efficiency, Lighting Control.

4

2 Protection Devices

MCB, RCCB, MCCB, Type of Fuses, Application, Advantages, Disadvantages and single line

diagram for distribution, Effect of electric current on human body.

4

3 Importance of Earthing

Types of Earthing, Earthing measurement, Earthing resistance, method of Earthing, Chemical

Earthing.

3

4 Distribution System of Water 6

General considerations, Methods of distribution, Service reservoir, System of supply of water,

methods of layout of distribution pipes, Wastage of water, Water waste survey, Permissible

waste of water, Preventive measures, Water waste tests, Maintenance of distribution system.

5 Water Supply and Drainage System within Building

Water supply to low and high rise building, Design of water storage tank – underground and

overhead tank, Design of septic Tank, Design of rain water harvesting system, Plumbing System

for wastewater drainage, choice of plumbing system.

6

6 Plumbing Hydraulics and Pneumatics

Hydrostatic Water Pressure, Types of pressure, Siphonage, Air and Gas Locks, Water Hammer,

Flow in pipes under gravity and pressure.

4

7 Water and Sewage Conveyance Materials

Pipes and conduits for water, waste water, storm water, industrial waste, industrial waste

water w.r.t lengths, commercial sizes, constituents, smoothness, resistance to loads, soils,

liquids and environmental suitability of pipes and pipe ends, jointing of pipes, sewers

and drains & their testing.

3

8 Appurtenances

Types of Valves – Sluice valves, pressure and flow control valve, Scour Valve, Bypass valve,

Float or Ball Valves, Reflux Valves, Pressure relief Valves, Air Valves, Hydraulic Traps.

3

9 Air Conditioning Systems

Air cooling and air conditioning systems, plant, supply systems, calculations of basic

sizes of components and layout of the system. System installation requirements and

demands in building layout, supply air, return air ducting, Examples of passive and

active cooling systems in traditional and present day conditions. Application to a

selected project, and case analysis of selected project.

3

10 Fire Protection

Study of fire regulations, fire extinguishing systems, warning systems, fire resistance of

different building materials, fire resistant doors, planning of buildings for fire escapes

3

Practical content

Text Books

1 Building Services ‐ By Prof.S.M.Patil

2 IS: 1172 - 1972, Basic requirements for water supply, drainage and sanitation.

3 IS: 2065 – 1983, Code of practice for water supply in buildings.

4 IS: 2064 – 1983 ,Code of practice for selection, installation & maintenance of sanitary Appliances

Reference Books

1 National Electrical code.

2 Electrical technology (part I,II& III) – By B.L. Theraja, A.K. Theraja,S.Chand Publication.

3 Principles of power systems – By V.K. Mehta, S Chand; 3rd Revised edition edition

4 Handbook of electrical engineering – By S.L. Bhatia, Khanna Publication

5 Plumbing, By F Hall. F.A., Palgrave Macmillan; 3rd edition edition

6 Plumbing: design and practice – By Deolalikar, S. G, McGraw Hill Education (India) Private Limited

7 Water supply and sanitary engineering – By S. C. Rangwala,Charotar Publishing House pvt. Ltd.; 28 edition

8 Water supply and sanitary engineering – By G. S. Birdie,DhanpatRai Publishing Company (p) Ltd

9 A.F.C. Sherratt, “Air-conditioning and Energy Conservation”, The Architectural Press, London, 1980.National Building Code.

10 William H.Severns and Julian R.Fellows, “Air-conditioning and Refrigeration”, John Wiley and Sons,

11 A.F.C. Sherratt, “Air-conditioning and Energy Conservation”, The Architectural Press, London, 1980.National Building Code.

GANPAT UNIVERSITY




Subject code 2HS 501 Subject Name APTITUDE SKILL BUILDING1



L TU P TW

Credit 1 1 Theory

Hours 2 1 Practical 35 15 50

Pre-requisites:

Learning Outcome:

On successful completion of the course the students will be able to:

Acquire satisfactory competency in use of two basic skills (Quantitative Ability and Logical Reasoning)

Solve campus placements aptitude papers covering Quantitative Ability and Logical Reasoning

Theory syllabus

Unit Content Hrs

1 Arithmetic Aptitude:

Problems on Trains, Time and Distance, Height and Distance, Time and Work, Simple Interest,

Compound Interest, Profit and Loss, Partnership, Percentage, Problems on Ages, Calendar, Clock,

Average, Area, Volume and Surface Area, Permutation and Combination, Numbers, Problems on

Numbers, Problems on H.C.F and L.C.M, Decimal Fraction

6

2 Data Interpretation:

Table Charts, Bar Charts

2

3 Logical Reasoning

Number Series, Letter and Symbol Series, Verbal Classification, Analogies, Artificial Language,

Matching Definitions, Making Judgments, Verbal Reasoning, Logical Problems, Logical Games

2

4 Verbal Reasoning:

Logical Sequence of Words, Blood Relation Test, Syllogism, Series Completion, Cause and

Effect, Dice, Venn Diagrams, Cube and Cuboid, Analogy

3

Practical content


Text Books

1

Reference Books

1 Quantitative Aptitude: By R. S. Aggarwal. S. Chand Publishers

2 A Modern Approach to Logical Reasoning: By R. S. Aggarwal. S. Chand Publishers

3 A Modern Approach To Verbal And Non-Verbal Reasoning: By R. S. Aggarwal. S. Chand

Publishers

4 An Advanced Approach To Data Interpretation: By Dr. R. S. Aggarwal. S. Chand Publishers

Note:

Version 1.0.0.0 (First Digit= New syllabus/Revision in Full Syllabus, Second Digit=Revision in Teaching Scheme,Third

Digit=Revision in Exam Scheme, Forth Digit= Content Revision)

L=Lecture, TU=Tutorial, P= Practical/Lab., TW= Term work, DT= Direct Teaching, Lab.= Laboratory work

CE= Continuous Evaluation, SEE= Semester End Examination

GANPAT UNIVERSITY


Semester VI Version 2.0.0.0


Subject code 2CI 601 Subject Name DESIGN OF STEEL STRUCTURE



L TU P TW



Pre-requisites: ELEMENTS OF STRUCTURAL DESIGN

Learning Outcome: After Completion of the curriculum of element of structural design, students can understand the different methods for

calculating the forces or moments of structural member. They get knowledge regarding how to analysisand design

different structural member like beam, column, slab and footing. Similarly in steel section students can get knowledge

of different cross section of steel and how to analyse tension member and compression member, laterally supported

beam and unsupported beam and also how to make suitable connection for different structural components.

Theory syllabus

Unit Content Hrs 1 Connections :

Stiffened and unstiffened, moment & shear resisting structural connections column to beam, Shear and

Moment Resisting, Eccentric Connection, Splices, Foundations, Grillage and Slab base, Base plates

10

2 Design of roof trusses :

Various types of trusses and their selection in industrial structures, effect of wind & or other loads

on trusses and structural detailing of connection between roof truss to column, monitored and knee

braced trusses.

9

3 Design of Flexural member :

Types of failure, Design requirements, Design of Laterally supported Beam, Laterally unsupported

Beam, Built-up beam, purlin, lintels

8

4 Design of plate girder

Welded & Bolted plate girder

6

5 Design of Gantry Girder 6

Practical content


Text Books

1 Design of Steel structures - Dayratnam,S.Chand Publication

2 Design of Steel Structures – Dr. B.C.Punmia&othersb By Laxmi Publication

Reference Books

1 Steel Structures - Arya & Ajmani, NEM CHAND & BROS; 2015 edition

2 Code of practice for General Construction in steel IS : 800-2007

3 Code of Practice for structural safety of IS: 875-2000 Buildings Loading standards.

4 Criteria for earthquake resistant design of IS: 1893-2002 structures.

GANPAT UNIVERSITY




Subject code 2CI 602 Subject Name ADVANCED SURVEYING



L TU P TW



Pre-requisites:

SURVEYING

Learning Outcome:

After Completion of the Curriculum of Advanced surveying students can get updated with the advanced or

modern technology of surveying. They will have the knowledge about Tachometry Survey, Topographical

Survey, total Station and aerial photogrammetry also they are aware with the astronomical aspects as well as

modern technology which include Remote Sensing, GIS and GPS.

Theory syllabus

Unit Content Hrs

1 Tacheometric Survey:

Introduction, principles of tachometry, different systems of tachometry, reduction tachometry,

errors in tachometry

8

2 Geodetic Surveying:

Principles, classification of triangulation systems, selection of stations, signals and towers,

Baseline measurement and correction, extension of base, base net, satellite station, reduction to

center.

4

3 Theory of Errors:

Introduction, technical terms, law of accidental errors, laws of weights, most probable value

Of observed quantities, triangulation adjustment.

8

4 Photogrammetric Survey:

Introduction, definition it terms, aerial photogrammetric, vertical photographs, Scale of photo,

Relief displacement,Co-ordinate system, flight planning, ground controls for aerial

photogrammetric, photo maps and mosaics, stereoscopy, Mirror stereoscope with parallax bar,

Height determination.

4

5 Other methods of Surveying:

Basic aspects of field astronomy, astronomical terms, coordinates systems, time relations

6 Advanced techniques of Surveying:

Introduction to electronic distance measurement techniques, introduction to remote sensing,

principles and applications of remote sensing, Fundamental and application of Geographical

Information System and Global positioning system, Fundamental and application of Total

Station in construction.

Practical content


Text Books

1 Surveying Vol-I &II By B.C.Punamia, Laxmi Publication.

Reference Books

1 Dr. K. R. Arora, " Surveying and Leveling, Vol. I & II ", Standard Publications.

2 Kanitkar&Kulkarni, " Surveying and Leveling, Vol. I & II ", VidyarthiGruhPrakashan

3 K. S. Duggal," Surveying and Levelling, Vol. I & II", TMH Edition.

4 Bansal, " Surveying and Levelling Practice", TMH Edition

5 Advanced Surveying By A.M.Chandra,New Age International Pvt Ltd Publishers

GANPAT UNIVERSITY




Subject code 2CI 603 Subject Name FOUNDATION ENGINEERING



L TU P TW



Pre-requisites:

GEOTECHNICAL ENGINEERING

Learning Outcome:

Upon successful completion of the subject Foundation Engineering students will have knowledge on how to

design foundations on soil considering its properties and suitability. They will also have knowledge of how to

determine bearing capacity of shallow and pile foundations considering various analyses.

Theory syllabus

Unit Content Hrs

1 Introduction:

Types of foundation, Factors affecting the selection of type of foundations, steps in choosing

types of foundation.

7

2 Subsurface Investigation:

Objectives of exploration, planning of exploration program, soil samples and soil samplers,

field penetration tests: SPT, SCPT, DCPT. Introduction to geophysical methods, Bore log and

report writing.

7

3 Bearing Capacity of Shallow Foundation :

Introduction, significant depth, design criteria, modes of shear failures.Detail study of

bearing capacity theories (Prandtl, Rankine, Terzaghi, Skempton), bearing capacity

determination using IS Code, Presumptive bearing capacity. Settlement, components of

settlement & its estimation, permissible settlement, Proportioning of footing for equal

settlement, allowable bearing pressure. Bearing capacity by use of penetration test data and

by plate load Test.Bearing capacity of raft. Factors affecting bearing capacity including

Water-Table. Contact pressure under rigid and flexible footings. Floating foundation.Types

of pavements & its design.

8

4 Pile foundations :

Introduction, load transfer mechanism, types of piles according to their composition,

their method of installation and their load carrying characteristics, piles subjected to

vertical loads- pile load carrying capacity from static formula,dynamic formulae (ENR

and Hiley), penetration test data & Pile load test.Pile group: carrying capacity, efficiency and

settlement. Negative skin friction.

5

5 Foundations on Expansive Soil:

Significant characteristics of expansive soil, footing on such soils, Problems and

preventive measures. Under-reamed pile foundation-its concept, design & field

installation.Significant characteristics of silt and loess, problems & remedial measures, footing

on such soils.

5

6 Earthquake Geotechnics and GeoSynthetics:

Geosynthetics: type’s, functional properties andrequirements. Geosynthetic applications in Civil

Engineering. Earthquake Geotechnics, Types of earthquakes. Seismic waves, Location of

earthquakes, Strength of an earthquake,Strong ground motion, Factors influencing ground

motion, Seismic hazards, liquefaction,Effect of liquefaction on Built Environment, Evaluation of

liquefaction susceptibility,Reduction of liquefaction hazard.

5

Practical content


Text Books

1 Arora K.R.; Soil Mechanics & Foundation Engineering ,Standard Publisher

2 B.C.Punamia .; Soil Mechanics & Foundation Engineering ,Laxmi Publication

Reference Books

1 Murthy V.N.S.; Soil Mechanics & Foundation EnggVol.I ,CBS Publication ; 1ST edition

2 Peck Ralph B., Thornburn Thomas H., Hanson Walter E.; Foundation Engineering,John Wiley & Sons;

2nd Edition edition

3 Das Braja M; Principles of Foundation Engineering,Publishe byCengage Learning

4 Singh Alam : Modern Geotechnical Engineering,CBS Publishers & Distributors; 3rd edition

5 Code of practice for determination of bearing capacity of shallow foundation IS:6403

6 Code of practice for design and construction of pile foundation- IS:2911 (Part I to IV)

7 Method for standard penetration test for soil- IS:2131

8 Code of practice for subsurface investigation for foundation- IS:1892

9 Code of practice for structural safety of buildings: Shallow Foundations- IS:1904

10 Code of practice for calculation of settlement of foundations- IS:8009

GANPAT UNIVERSITY




Subject code 2CI 604 Subject Name ESTIMATING AND COSTING



L TU P TW



Pre-requisites:

Learning Outcome:

By learning the subject students will be able to understand the concept of estimate of various items of

Buildings, Roads & other civil engineering structures.Students will able to read Structural drawing,

Specification and cost analysis for various structural items/work carried out in construction work.

Theory syllabus

Unit Content Hrs

1 GENERAL:

Purpose and importance of estimation, role of surveyor works.

Types of estimates approximate estimating techniques for various civil engineering works,

reading of working drawings, ISI code for measurements.

2

2 ESTIMATION OF BUILDINGS:

Building components, measurement techniques for earthwork and masonry in foundation,

measurement and estimation of different building components.

Measurement and estimation of different R. C. C. items inclusive of reinforcement, estimation

of beam, column, slab, footing and staircase etc.

Estimation of finishing work and different types of roofs.

Measurement and estimation of different woodwork and steelwork.

Typical estimation of load bearing and a R. C. C. framed structure of one / two storeyed building

along with schedule of materials and task force.

7

3 ESTIMATING OF OTHER CIVIL ENGINEERING STRUCTURES:

Estimating of different roads and culverts.

Earthwork estimation for earthen dam and irrigation channels.

Rough estimation of domestic water supply, sanitation and septic tanks.

Estimation of domestic electrical fixtures and work.

5

4 ANALYSIS OF RATES:

Purpose and principal factors affecting the rates of an item of work, output of labour force.

Analysis of rates for important building items and other typical civil engineering works

mentioned above, S. O. R. statements.

4

5 ABSTRACTING AND BILLING :

Abstracting methods relevant to ISI standards, preparation of abstract statements, cost analysis

and statement.

2

6 SPECIFICATION WRITING :

Purpose and basic principles of specifications, types of specification, study of important

specification. Specification drafting for important civil engineering items - brief and detailed

specification

2

Practical content

Based on Syllabus Content

Text Books

1 Dutta B. N., “ Estimating and Costing “, S. Dutta& Co., Lukhnow - 1 (1997) UBS Publisher.

Reference Books

1 Birdie G. S., “Text book of Estimating and Costing “, DhanpatRai& Sons, Delhi - 6 (1988.)

2 Rangwala S. C., “Elements of Estimating and Costing “,Charotar Publishing Pvt. Ltd., (1996).

GANPAT UNIVERSITY




Subject code 2CI 605 Subject Name ENVIRONMENTAL ENGINEERING-II



L TU P TW



Pre-requisites:

ENVIRONMENTAL ENGINEERING-I

Learning Outcome:

After Completion of the students aware With the Basic Knowledge of Sewage System. Also they are

under-stand basic parameters of the Waste Water and Based on it they will design of the various water

treatment Units.Also they are aware with the Solid Waste Management and Basic Air pollution.

Theory syllabus

Unit Content Hrs

1 Introduction of waste water:

Important terms and definition, classification of waste waters, Physical, Chemical & Biological

parameters and their significance, B.O.D /C.O.D requirements

4

2 Collection and Conveyance :

Separate and combined sewerage systems for domestic waste-water and storm waters

collections, components, appurtenances, layout and planning of sewerage systems, quantity of

sewage & storm waters, design of sewers, maintenance of sewerage systems.

4

3 Waste-water Treatments :

Objectives of waste-water treatment, primary and secondary treatment systems,Basic Design

consideration for wastewater treatment, Design Of Sump well and pump of pumping station,

design of conventional treatments units like screen & grit chambers & PST, ASP, trickling filter,

SST, UASB etc for domestic waste-water.

15

4 Sludge Handling :

Quantity and quality of sludge, sludge digestion methods, sludge drying beds and disposal of

sludges.

4

5 Waste-water disposal :

Alternative disposal methods like disposal by dilution by irrigation, on land etc. Standards for

disposal alternatives, natural purification of polluted streams.

4

6 Solid Waste Management:

Types and Sources, refuse collection and disposal techniques

4

7 Air Pollution:

Definition, causes and Effects of air pollution, classification and sources of air pollutants,

metrological aspects of air pollution dispersion

4

Practical content

Based on Syllabus Content

Text Books

1 Dr. B.C.Punamia, “Waste water engineering”, Laxmi publication.

2 S.K.Garg, “Sewage Disposal and Air Pollution” Khanna Publication.

Reference Books

1 Metcalf and Eddy, “Wastewater Engineering” : Treatment, Disposal Reuse” , Tata McGraw Hill Ed.

New Delhi. (1995)

2 Birdie. G.S, “Water supply and sanitary Engineering “,DhanpatRai and Sons, New Delhi (1995

3 Manual on Sewerage and Sewage Treatment, CPH and EE Organisation, Ministry of works and housing

Govt. of India, New Delhi. (1991)

GANPAT UNIVERSITY




Subject code 2CI 606 Subject Name SEMINAR



L TU P TW

Credit 1 1 Theory

Hours 2 2 Practical 35 15 50

Pre-requisites:

Learning Outcome:

Provide exposure and knowledge to the studentsin self-study on the topic of selected area and develop research,

reportwriting and presentation skills.

Theory syllabus

Unit Content Hrs

1 1. Introduction 2. Need for the study 3. Objectives 4. Scope 5. Methodology & Schedule

I. Literature Review II. Data collection

III. Data Analysis IV. Conclusion & Recommendations

6. Bibliography / References 7. Annexures Submissions and Presentations

Sr. No. Description

1 Initial Proposal

2 Final proposal & Literature Review

3 Data Collection

4 Data Analysis

5 Final Comprehensive Report

20

GANPAT UNIVERSITY




Subject code 2HS601 Subject Name APTITUDE SKILL BUILDINGII



L TU P TW

Credit 1 1 Theory

Hours 2 2 Practical 50

Pre-requisites:

APTITUDE SKILL BUILDING1

Learning Outcome:

On successful completion of the course the students will be able to:

Acquire satisfactory competency in use of two basic skills (Quantitative Ability and Logical Reasoning)

Solve campus placements aptitude papers covering Quantitative Ability and Logical Reasoning

Theory syllabus

Unit Content Hrs

1 Arithmetic Aptitude:

Square Root and Cube Root, Surds and Indices, Ratio and Proportion, Chain Rule, Pipes and

Cistern, Boats and Streams, Alligation or Mixture, Logarithm, Races and Games, Stocks and

Shares, Probability, True Discount, Banker's Discount, Odd Man Out and Series

6

2 Data Interpretation:

Pie Charts, Line Charts

2

3 Logical Reasoning

Analyzing Arguments, Statement and Assumption, Course of Action, Statement and

Conclusion, Theme Detection, Cause and Effect, Statement and Argument, Logical

Deduction

13

4 Verbal Reasoning:

Seating Arrangement, Character Puzzles, Direction Sense Test, Classification , Data

Sufficiency, Arithmetic Reasoning, Verification of Truth

3

Practical content

Text Books

1

Reference Books

1 Quantitative Aptitude: By R. S. Aggarwal. S. Chand Publisher

2 A Modern Approach to Logical Reasoning: By R. S. Aggarwal. S. Chand Publishers

3 A Modern Approach To Verbal And Non-Verbal Reasoning: By R. S. Aggarwal. S. Chand

Publishers

4 An Advanced Approach To Data Interpretation: By Dr. R. S. Aggarwal. S. Chand Publishers

Note:

Version 1.0.0.0 (First Digit= New syllabus/Revision in Full Syllabus, Second Digit=Revision in Teaching Scheme,Third

Digit=Revision in Exam Scheme, Forth Digit= Content Revision)

L=Lecture, TU=Tutorial, P= Practical/Lab., TW= Term work, DT= Direct Teaching, Lab.= Laboratory work

CE= Continuous Evaluation, SEE= Semester End Examination

GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY · 2018-06-06 · 2 Indeterminate...

Documents

Transcript of GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY · 2018-06-06 · 2 Indeterminate...