G5 Diamond Gaming Device - Interblock Diamond Service Diamond Roulette... · G5 Diamond Roulette...

A A A A

A20

10 20

G5 Diamond Gaming DeviceRoulette User’s Manual

2

G5 Diamond User’s Manual

Document version: 1.4Document date: November 5, 2014Settings version: 4.76.5.0

Document Revisions1.0 Initial document1.11.21.3 Revised description of Golden Chip Jackpot1.4 Updated Contacts page

Updated Play Station descriptionRevised description of Goal! Roulette Side BetUpdated description of Golden Chip JackpotUpdated Locks Dimensions chapter

Copyright © 2014 Interblock d.d. All rights reserved.

The information in this document is confidential.Reproduction in whole or in part on any medium without the express permission of Interblock d.d. is strictly prohibited.

3


ContaCts

24/7 technical supportphone: +386 51 305 111fax: +386 1 724 77 44email: [email protected]

HeadquartersINTERBLOCK Luxury Gaming Products d.d.address: Gorenjska cesta 23, 1234 Menges, Slovenia, Europe

Regional offices:

australiaINTERBLOCK ASIA PACIFIC Pty Ltdaddress: 19 Cowrang Ave, PO Box 93, Terrey Hills, NSW 2084, Australia24/7 technical support: +853 62 087 029email: [email protected]

asiaINTERBLOCK ASIA PACIFIC Pty Ltdaddress: No. 423, Rua de Viseu, R/C, EDF, Man Fai Garden Loja E, Taipa, Macau24/7 technical support: +853 62 087 029email: [email protected]

CanadaINTERBLOCK CASINO PRODUCTS CANADA Inc.address: 1300 - 1969 Upper West Street, Purdy’s Wharf Tower II, HalifaxNova Scotia, Canada B3J 3R724/7 technical support: +1 877 676 7711email: [email protected]

UsaINTERBLOCK USA L.C.address: 711 Pilot Road, Suite A, Las Vegas, NV 89119, USA24/7 technical support: +1 877 676 7711email: [email protected]

4


Table of Contents

Purpose 8Trademarks 8Declaration 9Warnings, Cautions and Notes 10Introduction 11

Electromechanical Game Generators 11Video Game Generators 11Multi-Station and Multigame Environment 11

Electromechanical Game GeneratorsG5 Diamond Roulette Generator 13

Basic Structure of G5 Diamond Roulette Generator 14

Play StationG5 Diamond Play Station 18

Basic Structure of G5 Diamond Play Station 19Connection Joints 20Pay and Online Systems 21

Interblock Roulette GamesInterblock Single Zero Roulette Game 23Interblock Double Zero Roulette Game 26Interblock Single Zero Roulette Game – Special Version 28Interblock Roulette Side Bets 30

Touchdown Roulette Side Bet for Single Zero Roulette 30Touchdown Roulette Side Bet for Double Zero Roulette 32Goal! Roulette Side Bet for Single Zero Roulette 34Big Roulette Poker Side Bet for Single Zero Roulette 37Bikini Side Bet 39

Interblock Roulette Graphical Player’s Interface 40Features Of the Roulette Player’s Interface 44

Placing Bets 44Fast Bet 44Wheel Bet View 45Showing Possible Winnings 45Bet Limits Display 46Number Orientation 47Reserve Table 47

5


Multi Denomination 48Tipping 49Multi Language Support 50

Progressive Jackpot Systems for Interblock Roulette Games 51Mystery Jackpot 51Roulette Mystery Jackpot Based On Wins Straight Numbers 53Golden Chip Jackpot 55

Common ProceduresCredit Procedures At the Play Station 59

Credit Increment 59Credit Redemption 59

Operator MenuThe Operator Menu 61

Accessing the Operator Menu 61Setting the Roulette Betting Parameters 62Managing Contactless Cards 65Adding New Cards & Editing Existent Cards 67Review History of Bets 68Review Periodical IN/OUT Counters 71Review Long & Short IN/OUT Counters 71Multigame Counters (for Multigame environment only) 72Review Long & Short Other Counters 73Online Counters 74Last Transactions 74Reset Counters 75Basic Center Unit Commands 76Advanced Center Unit Commands 77Lock or Unlock Current Station 78Review Event Logs 78Component Diagnostics 79Shutdown and Restart of the Gaming Device 80

MaintenanceSafety Precautions 82Generator Maintenance Intervals 83Play Station Maintenance Intervals 85

Table of Contents - cont.

6



Maintenance Options 86Maintenance / Test Menu 86Touch Screen Test 90

Technical DataLock Dimensions 92

G5 Diamond Play Station 92G5 Electromechanical Game Generator 92

G5 Diamond Roulette Technical Data 93

SettingsG4 Settings – Param.ini 97

Multi Game 98Common Game Settings 99Path / Address 102Other Settings 103Hardware 106Tower Lights 108Touch Screen 110Ticket Printer 111Bill Acceptor 113Coin Acceptor 115Cash Box (Player Cards or Ticket Validation) 118OnLine 119OnLine - SAS 121Monitor Settings 124Denomination Timings 126GLM 127Roulette 0/00 Game Settings 128

G4 Settings – Center.ini 131Common Settings 132Hardware 136OnLine 138Table Close 140GSM 142Counters 143G4 Center Lights 144PID Display 146Roulette 148

7



G4 Initial values 150Acceptors 151OnLine 152Switches 153Jackpot 154Jackpot - Mistery Jackpot 155Jackpot - House Edge Jackpot (Keno) 157Jackpot - Double Zero Bonus 158Jackpot - Roulette Mistery Jackpot based on Wins Straight Numbers 159Jackpot - Roulette Mystery Progressive Jackpot “Golden Chip” 161Database Settings 163Counters 164Access Permissions 165Security 166Multi Game 168Other Stuff 169

8


tRademaRks

is a registered trademark of INTERBLOCK Luxury Gaming Products d.d. company.

PURPose

The purpose of this manual is to provide you with all the necessary instructions for a correct use and maintenance of the Interblock G5 Diamond gaming devices.

Disclaimer:

Although this manual have been prepared with the best attentions for the composition of texts, we can’t assure that all the aspect of the game came to be covered.

Settings described in a chapter Settings may vary for different software versions and jurisdiction requirements.

9


deClaRation

The manufacturer INTERBLOCK Luxury Gaming Products d.d. declares under sole responsibility that the Interblock G5 Diamond gaming devices has been designed and manufactured to comply all the technical requirements in accordance with the following directives:

EN 60335-2-82:2003 + A1:2008 in conjunction withEN 60335-1:2002 + A1:2004 + A11:2004 + A2:2006 + A12:2006 + A13:2008 + A14:2010 + A15:2011

IEC 60335-2-82:2002 (2nd edition) + A1:2008 in conjunction withIEC 60335-1:2001 (4th edition) (incl. Corrigendum 1:2002) + A1:2004 + A2:2006

(incl. Corrigendum 1:2006)

CAN/CSA E60335-1:2003 (3rd edition) + A14:2010CAN/CSA E60335-2-82-06:2006 (2nd edition)

UL22:2008 (6th edition)

emC directive - 2004/108/ECEN 55022:2010 EN 55024:2010EN 61000-3-2:2006+A1:2009+A2:2009EN 61000-3-3:2008

FCC Part 15, Subpart B, Class A

RoHs directive - 2011/65/EUEN 50581:2012

10


WaRnings, CaUtions and notes

Throughout the manual, the following symbols are used to emphasize important instructions:

CaUtion! The Caution symbol precedes an operating procedure or maintenance practice which, if not strictly observed, could result in damage of the product or corruption of data.

note. The Note symbol precedes an operating procedure, maintenance practice or any other condition which requires highlighting.

WaRning! Due to exposure to the electrical components, the Warning symbol precedes an operating procedure or maintenance practice which, if not correctly followed, could result in personal injury.

11


intRodUCtion

Main features of the Interblock G5 Diamond family of gaming devices are modularity, efficiency, and attractive player’s experience.Modularity, being the guiding principle in design, separates the G5 products in two distinct groups; the Game Generator where the game is conducted, and the Play Station where the player interacts with the game. This principle allows customers to use their imagination and experience to custom build own designs of gaming devices.All G5 Diamond products are highly adaptive to meet with versatility of designs, pay systems, as well as the space requirements of the customer (any desired number of Play Stations can be connected into single gaming device to optimally fill the space).

Game Generators consists of electromechanical and video game generators (random result generators).

electromechanical game generators

Continuous development of automation principles in gaming has been the driving force of Interblock’s gaming devices. The main idea was to bring the most popular games, such as Roulette, Dice, Card and Bubble games to fully automatic versions, available for places where Table games are not allowed. All electromechanical G5 Diamond gaming devices are built to include the essential elements of Table versions of the fore-mentioned games, such as using a real Roulette wheel, real dice, real Keno bubble and real cards to enhance the player’s experience. With more than a decade of experience and several international awards for best product, the fifth generation gaming devices, under the name G5 Diamond, offer a state-of-the-art automatic games in a multi-station environment. All products have undergone a thorough electrical, mechanical and randomness tests and certifications, and are adapted to comply with all the laws and requirements for different jurisdictions.

Video game generators

Video games, which do not require a complex mechanism for generating random results, but only a computer with graphics and random generator, have also been a part of the Interblock G5 Diamond family of gaming devices. The advancement of graphics and display technology has brought a simple, yet effective way of conducting games with a software random generator. Roulette, Dice, Card and Bubble games were automated to their virtual versions, with the progress of the games being displayed on one or more large LCD displays.

multi-station and multigame environment

The multi-station environment, where each player participates in a game through his own Play Station, has evolved to a point, where the TCP/IP based communication between the Play Station and the Game Generator allows simple interconnectivity. That means that each Play Station can connect to several Game Generators, giving each player a choice of which game to play. This give a rise to the environment called “Multigame”, where several Game Generators and Play Stations are joined together in a single gaming device.

12


G5 Diamond Gaming Devices

Electromechanical Game Generators

13


g5 diamond RoUlette geneRatoR

Being the origin of the company’s first line of gaming devices, the electronic Roulette has evolved into the fifth generation with more than a decade of continuous research and development of automation of the classic Roulette game. The G5 Diamond Roulette is a fully automatic version of the Roulette game, available with a single or double-zero Roulette wheel. It uses air pressure to launch the ball onto the rim and a series of optical and proximity sensors to track the ball during its path and detect its final position. Improvements of the concept in the fifth generation include new fast result detection with 3 sensors, new ball-launching mechanism with 10 ball charger for automatic ball change, a completely non pliable carbon-fiber brim around the Roulette wheel and a thorough fraud-preventing system (multiple access sensors & switches and in-built tilt sensor).

G5 Diamond Roulette consists of Roulette electromechanical generator, PID and LED Sign.PID (Player Information Display) offers the player a thorough overview of statistical information about the game currently in progress on the gaming device, such as last played games, minimum and maximum bets, 5 most frequent numbers and the number of games.LED Sign’s key feature is attracting players to participate in a game. LED display is capable to show all kinds of content not just simple letters, but also movie content, and is a dynamic addition and takes a role of eye-catcher.

G5 Diamond Roulette Generator supports Roulette game with all possible bets on a single-zero or double-zero Roulette wheel, as well as additional Side bets.

G5 Diamond Roulette Generator with PID and LED Sign

14


Basic structure of g5 diamond Roulette generator

The central module of the electronic Roulette is an automatic Roulette wheel which is mechanically the same as the classical Roulette wheel, but additionally equipped with protection cover, detection devices and electromechanical spinning and lifting mechanisms (in short, the electronic Roulette Generator). It is fastened to the top of a metal frame cabinet containing a PC, electrical supply devices, ball launching electric fan and hold-and-start mechanism and devices control board.

Live camera

Camera for capturing live video, which is displayed on PID and/or video wall.

Ball-guiding tube

The ball travels the ball-guiding tube and exits to the rim of the Roulette wheel.

Tilt sensor

Tilt sensor is part of fraud-preventing system, and is intended to alert the casino operator, if the player it trying to affect the result of the game by shaking or movingthe Roulette Generator.

Ball launching electric fan with air filter

The ball-launch fan provides the airflow to launch the ball into the ball-guiding tube.

Roulette wheel

Single Zero or Double Zero Roulette wheel.

Lifting Wheel Cone

At the end of game cycle (after winning number detection) wheel’s cone is lifted, allowing the ball to slides under the wheel. The ball is then moved into the ball launch position or into the ball replacement mechanism. The game cycle is finished.

Revolving mechanism for changing balls

Nine balls are stored inside the revolving magazine, while one ball is used for the game. Revolving mechanism replaces the used ball with the new one when the preset number of games is reached.

15


Ball hold-and-start mechanism

A mechanism that launches the ball into the ball-guiding tube.

Supply Module and Devices Control Board

Board with electronic modules for providing automatic operation:• PLC unit controls modules which run

game phases• Supply module distributes power to

various connected modules• PLC I/O module controls all optic,

proximity and inductive sensors, controls all motors which are important for correct game functioning, and communicates with the PLC unit.

UPS Unit and Battery

An uninterruptable power supply ensures operation even in case of main power failure.

Power Supply Unit

Power Supply unit provide reliable and stable 24V DC power supply to whole system.

Embedded PC

A PC that runs software for operating the Roulette Generator and controlling the game.

16


Basic structure of Roulette generator - cont.

Winning number detection optical sensors

Three optical sensors, which detects the ball when it lands in one of the pockets. The winning number is then calculated with the help of the pocket and zero pocket proximity sensors.

Ball-in-track optical sensor

This sensor detects the ball as it revolves on the ball-track, spinning counter-clockwise. While the ball is revolving on the ball-track the players may be allowed to place bets for some time (depending on the game configuration). After the ball leaves the ball track the betting is no longer possible.This sensor also helps detect any irregularities, which may occur as a result of a fraud attempt or a damaged rim, such as a sudden acceleration of the ball, not enough revolutions prior to result detection, etc.

Zero pocket proximity sensor

Proximity sensor which detects the pocket with the number zero (single zero) as it passes by.

Pocket proximity sensor

Proximity sensor which detects each pocket passing by.

LED tape for center illumination

LEDs on PCB tapes illuminates the Roulette wheel.

17



Play Station

18


g5 diamond Play station

G5 Diamond Play Station is gaming device where the player interacts with the game.

The player controls the game through a touch sensitive display. The display shows each player’s actions and the state of the game (placing of bets, winning number, progress of the game cycle, “Call attendant” messages and similar information). Additionally, service lights for each Play Station are placed on the station’s arc. They are used for reporting the special game conditions and service or error modes of the gaming device. Various light color schemes are defined for any of the required mode of service light operation. Players at the individual Play Stations may increment their credit by either bills or tickets and receive payouts in form of tickets or hand-pay, when printing the ticket is not available.

G5 Diamond Play Station is built to accommodate large touch sensitive LCD display together with separate Button Deck panel. There are several Button Deck options:• Button Deck LCD display• Glass panel with integrated Power Meter and “Interblock” logo• Glass panel with integrated Physical Buttons• Glass panel with integrated Physical Buttons and Power Meter• Blank panel

Among a lot of improvements, G5 Play Station has even better security, illuminated armrest, faster and more powerful embedded graphical engine, HQ sound system, unified Power Supply system for 110V and 220V regions, and easier access for maintenance purposes.The new ergonomically designed surface with 8 degrees pitch provides extremely comfortable player environment.

19


Basic structure of g5 diamond Play station

Ticket printer (optional)

Part of the pay system, the ticket printer prints out the ticket as a mean of credit redemption.

Player tracking console (optional)

Console, where the player registers before he begins using the station.

Camera (optional)

Camera for taking player’s pictures for different purposes (Leader board / Score board...). Pictures can be taken with player’s permission only.

Bill & Ticker acceptor (optional)

Part of the pay system, bill and ticket acceptor is where the player inserts the tickets or bills for credit increment.

HD touch sensitive LCD display

A touch sensitive display is an interface through which the player interacts with the game.

Button Deck touch sensitive LCD display (optional)

Additional touch sensitive display for displaying extra side bets and Power Meter Tournament.

Color adjustable illuminated armrest

Gel armrests which are illuminated with LEDs. Color of illumination can be adjusted according to customer wishes.

Interblock reader

A contactless RFID card reader. Used as a mean to access the operator menu and if applicable, for cashless credit increment.

20


Counters (optional)

The G5 Diamond Play Station optionally contains both mechanical and software counters. 10x 7-digit mechanical counters are mounted on each Play Station and can display any accountable value (Bill In, Ticket In, Ticket Out, Hand pay, Jackpot, Games played, Online, etc.).

LED arc

Service lights used for reporting the special game conditions and service or error modes of the gaming device.

Connection Joints

Play Station is basically stand-alone device. In order to create a multistation gaming device, Play Stations are connected together into string with Connection Joints.

G5 Connection Joint – PS-PSConnection Joint for connecting two Play Stations. Joint allows rotation up to 45˚ (in 5˚ steps) to create rounded strings. Joint also incorporate tunnel for cable connection.

G5 Connection Joint – PS-ENDEnd console for the left and right side of the G5 Play Stations string.

21


Pay and online systems

The G5 Diamond Play Station can feature any possible combination of bill and ticket devices.

Bill Validators

G5 Diamond Play Station features a custom-built electronic module, which controls all bill validator functions. The following bill validators are supported:• JCM Global - iVizion and UBA models (with ICB support)• MEI - Cashflow SC Advance Series (with EasyTrax support)• Crane Payment Solutions - CashCode ONE and Ardac Elite

ticket Printers

The ticket printer in the Play Station is controlled by the same electronic module as the bill acceptor. The following ticket printers are supported:• Transact - Epic 950• FutureLogic - GEN2 Universal and GEN3 Evolution• JCM Global - Paycheck 4

Cashless Credit increment and Redemption

All cashless credit operations on the station are performed with the operator’s RFID key, which is read by the Interblock reader on every Play Station. The operator’s RFID key must be assigned a sufficient level of authorization to perform cashless credit increments and redemptions. All RFID chips in keys are unique and cannot be reproduced by any means.

online Connectivity

All G5 Diamond gaming devices can be connected to online systems. Three major online systems are supported, including the most widely used SAS with its latest revision 6.02 (sections Progressives, Tournament, Component Authentication Protocol and Multi denomination counters are not supported). The other two online systems are V.A.N. (used in the Netherlands) and X-protocol (used in Australia).

22



Interblock Roulette Games

23


inteRBloCk single ZeRo RoUlette game

In the Single Zero Roulette game, players place their bets on a number or a series of numbers.

Bet on Win Description

1 number (Straight) 36 x bet

A chip can be wagered on any individual number, including zero (0). The chip is placed directly on the individual number.

2 numbers (Split) 18 x bet

A chip can be wagered on two adjacent numbers by placing the chip on the line dividing the two numbers.

3 numbers (Street) 12 x bet

Street bets cover three numbers. Place the chip on the lower boundary line of the Roulette table below to the corresponding row of three numbers, or on the inner boundary line between three numbers (for example 0/1/2).

4 numbers (Corner) 9 x bet

Corner bets cover four numbers. Place the chip on the cross where the four numbers intersect. You may also wager on 0, 1, 2, and 3 by placing the chip on the lower boundary line of the Roulette table between 0 and 1.

6 numbers (Six Line) 6 x bet

A line bet covers two street bets (i.e. the six different numbers in two rows of three numbers. For example: 4,5,6 + 7,8,9). Place the chip on the closest boundary line of the Roulette table where it is intersected by the line dividing the two rows.

12 numbers (Column or

Dozen)3 x bet

A column bet is placed in one of three boxes labeled 2-1 on the right side of the table. By placing the chip in one of these boxes, you mark all twelve numbers in the column left of it (excluding 0). To make a Dozen bet, place the chip in boxes labeled 1-12, 13-24 or 25-36. This covers all the numbers below the chosen box.

18 numbers (Simple bet) 2 x bet

A bet placed in one of the boxes on the bottom of the table (red/black, odd/even, 1-18/19-36) covers half of the numbers on the Roulette table (excluding 0).

24



Split Columns / Dozens 1.5 x bet

Chip is placed on the inner boundary line between Column bets (2-1), or on the inner boundary line between Dozen bets (1-12/13-24 or 13-24/25-36). This bet is available for specific jurisdictions only.

Bet on Description

Vicini Dello Zero

Played with 9 chips placed: two on 0/2/3 street, two on corner 25/26/28/29, and one chip on each split: 4/7, 12/15, 18/21, 19/22, 32/35.

Serie 5/8

Played with 6 chips on the splits: 5/8, 10/11, 13/16, 23/24, 27/30, 33/36.

Orfanelli

Played with 5 chips: one on 1 straight up , and the rest on the splits: 6/9, 14/17, 17/20, 31/34.

inteRBloCk single ZeRo RoUlette gameCont.

25


Bet on Description

Zero Game

Played with 4 chips: one on 26 straight up , and the rest on the splits: 0/3, 12/15 and 32/35.

Red Snake

Neighbours

When a chip is placed on a single number (Straight up), pressing the “Neighbours” button will place a chips of the same value on the two left and two right neighbouring numbers (as they lay on the Roulette wheel, not on the table). Pressing this option again will place the same bet on one additional left and one additional right neighbouring number, until maximum number of added bets is reached (set in G4Settings). Until that bets on all selected numbers start increasing.

FinaliFinali option means you are betting on numbers ending with the same digit, straight up.(For example, Finali 5, means straight up bet on 5, 15, 25, 35).

Red Splits Played with 4 chips on four red splits: 9/12, 16/19, 18/21, 27/30.

Black Splits Played with 7 chips on seven black splits: 8/11, 10/11, 10/13, 17/20, 26/29, 28/29, 28/31.

CompleteWith “Complete” option you are placing chips of the same value on all allowed combinations of bets on a selected number (straight up, split, corner).

inteRBloCk single ZeRo RoUlette gameCont.

26


inteRBloCk doUBle ZeRo RoUlette game

In the Double Zero Roulette game, players place their bets on a number or a series of numbers.



A chip can be wagered on any individual number, including zero (0) and double zero (00). The chip is placed directly on the individual number.







5 numbers 7 x betA bet on five numbers can be wagered by placing a chip on the outside border of numbers 0 and 1. The bet covers numbers 0, 00, 1, 2 and 3.




Dozen)3 x bet


27





Bet on Description

Red Snake

Neighbors

When a chip is placed on a single number (Straight up), pressing the “Neighbors” button will place a chips of the same value on the two left and two right neighbouring numbers (as they lay on the Roulette wheel, not on the table). Pressing this option again will place the same bet on one additional left and one additional right neighbouring number, until maximum number of added bets is reached (set in G4Settings). Until that bets on all selected numbers start increasing.





inteRBloCk doUBle ZeRo RoUlette gameCont.

28


inteRBloCk single ZeRo RoUlette game – sPeCial VeRsioninteRBloCk monte CaRlo RoUlette

Monte Carlo Roulette game uses single zero Roulette wheel, where numbers are organized in order as on double zero Roulette wheel.



A chip can be wagered on any individual number, including zero (0). The chip is placed directly on the individual number.










Dozen)3 x bet




29


inteRBloCk monte CaRlo RoUlette gameCont.

Bet on Description

Red Snake

Neighbours

When a chip is placed on a single number (Straight up), pressing the “Neighbours” button will place a chips of the same value on the two left and two right neighbouring numbers (as they lay on the Roulette wheel, not on the table). Pressing this option again will place the same bet on one additional left and one additional right neighbouring number, until maximum number of added bets is reached (set in G4Settings). Until that bets on all selected numbers start increasing.





30


inteRBloCk RoUlette side Bets

The object of Interblock Roulette Side Bets is allowing players to get more action while playing their favorite Roulette game.

touchdown Roulette side Bet for single Zero Roulette

The Touchdown Roulette Side Bet can be made before each Roulette spin, except for when a Touchdown Roulette game is already in progress.The Touchdown Roulette game is triggered with the Roulette result “0” or Repeated Number.All other outcomes (1 – 36) result in a loss of the Touchdown Roulette Side Bet.

If game is triggered (“0” or Repeated Number), player will be prompted to choose either RED or BLACK team (team will be randomly assigned to players who fail to select a team in the designated time).

Each game lasts for 4 spins.After each of the 4 spins, the football will move according to the following table:

Roulette Result Yard Result0 0 yd.

1 - 10 3 yd.11 - 20 5 yd.21 - 30 10 yd.31 - 36 15 yd.

Color of Roulette result determines which color End Zone Football moves towards.

The location of the Football at the end of the 4 spins determines Winning Team and Pay Out:• Red Team Wins: Football closer to Red End Zone.• Black Team Wins: Football closer to Black End Zone.• TIE: Football located on the 50 Yard Line.

31


Pay Tables for Touchdown Roulette Side Bet - Single Zero Roulette

Pay Table 1PRTP = 89.80%




Winning Team - Touchdown 1000 to 1 500 to 1 1000 to 1 500 to 1Winning Team - 10 Yard Line 150 to 1 150 to 1 200 to 1 200 to 1Winning Team - 20 Yard Line 75 to 1 75 to 1 75 to 1 75 to 1Winning Team - 30 Yard Line 50 to 1 50 to 1 50 to 1 50 to 1Winning Team - 40 Yard Line 20 to 1 25 to 1 20 to 1 25 to 1Winning Team - 49 Yard Line 10 to 1 10 to 1 10 to 1 10 to 1TIE 5 to 1 5 to 1 5 to 1 5 to 1Losing Team 1 to 1 1 to 1 1 to 1 1 to 1

Only the highest achieved prize is paid out.

note. Switching Side Bet ON/OFF and choosing specific paytable for Side Bet is set in InitialValues.exe program (tab “Multi Game”).

32


touchdown Roulette side Bet for double Zero Roulette

The Touchdown Roulette Side Bet can be made before each Roulette spin, except for when a Touchdown Roulette game is already in progress.The Touchdown Roulette game is triggered with the Roulette result “0” or “00”.All other outcomes (1 – 36) result in a loss of the Touchdown Roulette Side Bet.

If game is triggered (“0” or “00”), player will be prompted to choose either RED or BLACK team (team will be randomly assigned to players who fail to select a team in the designated time).

Each game lasts for 4 spins.After each of the 4 spins, the football will move according to the following table:

Roulette Result Yard Result0 - 00 0 yd.1 - 10 3 yd.

11 - 20 5 yd.21 - 30 10 yd.31 - 36 15 yd.

Color of Roulette result determines which color End Zone Football moves towards.

The location of the Football at the end of the 4 spins determines Winning Team and Pay Out:• Red Team Wins: Football closer to Red End Zone.• Black Team Wins: Football closer to Black End Zone.• TIE: Football located on the 50 Yard Line.

33


Pay Tables for Touchdown Roulette Side Bet - Double Zero Roulette





Winning Team - Touchdown 1000 to 1 500 to 1 1000 to 1 500 to 1Winning Team - 10 Yard Line 150 to 1 250 to 1 200 to 1 200 to 1Winning Team - 20 Yard Line 75 to 1 75 to 1 75 to 1 100 to 1Winning Team - 30 Yard Line 50 to 1 50 to 1 50 to 1 50 to 1Winning Team - 40 Yard Line 25 to 1 25 to 1 25 to 1 25 to 1Winning Team - 49 Yard Line 10 to 1 10 to 1 10 to 1 10 to 1TIE 5 to 1 5 to 1 5 to 1 5 to 1Losing Team 1 to 1 1 to 1 1 to 1 1 to 1

Only the highest achieved prize is paid out.


34


goal! Roulette side Bet for single Zero Roulette

The Goal! Roulette Side Bet can be made before each Roulette spin, except for when a Goal! Roulette game is already in progress.By optimal strategy player should not bet when previous result is “0”.

The Goal! Roulette game is triggered with the Roulette result “0” or Repeated Number.All other outcomes (1 – 36) result in a loss of the Goal! Roulette Side Bet.If game is triggered (“0” or Repeated Number), player will be prompted to choose either RED or BLACK team (team will be randomly assigned to players who fail to select a team in the designated time).

The object is for the selected team to score a Goal.

Each game lasts for 3 spins, with a potential Bonus 4th spin (shot on goal).After each of the first 3 spins, the soccer ball will move according to the following table:

Roulette Result Meter Result0 0 m

1 - 10 5 m11 - 20 10 m21 - 30 15 m31 - 36 20 m

Color of Roulette Result determines direction towards which color of Goal Net the Soccer Ball moves:• Color of Roulette Result is Red – the Soccer Ball moves towards the Black Goal Net• Color of Roulette Result is Black – the Soccer Ball moves towards the Red Goal Net

The location of the Soccer Ball at the end of the 3 spins determines Winning Team and whether a Bonus 4th Spin (Shot On Goal) is awarded.• Red Team Wins: Soccer Ball closer to Black Goal Net.• Black Team Wins: Soccer Ball closer to Red Goal Net.• Draw (TIE): Soccer Ball located at Mid Field.

35


Shot On Goal:At the end of the game, if the ball is located on one of the Shot On Goal position (21m - 45m from Mid Field), a “Shot On Goal” is awarded, and both teams will have a chance to multiply their winnings.The offensive team will be prompted to select a target in one of the 4 corners of the goalie net.The defensive team will be prompted to select one of the 4 corners to place their goalie.

The color and numeric value of the next Roulette spin determines the location of the “Shot on Goal” (“0” = Missed Shot on Goal).• Lover Left Target/Gloves = Roulette Result is Red, Low Numbers (1 - 18)• Upper Left Target/Gloves = Roulette Result is Red, High numbers (19 - 36)• Upper Right Target/Gloves = Roulette Result is Black, High numbers (19 - 36)• Lover Right Target/Gloves = Roulette Result is Black, Low Numbers (1 - 18)

Outcome for Offensive Player: • Select Correct Target = Shot Multiplier is 5X• Select Correct Color = Shot Multiplier is 2X

Outcome for Defensive Player: • Select Correct Gloves or Missed Shot on Goal (“0”) = Goalie Multiplier is 5X

36


Pay Tables for Goal! Roulette Side Bet - Single Zero Roulette

Pay Table 1PRTP = 92.58%**

PRTP = 92.64%***

Pay Table 2PRTP = 90.96%**PRTP = 91.03%***

Winning Team - 45 m stripe (100 x Shot Multiplier*) to 1 (50 x Shot Multiplier*) to 1





Winning Team - 20 m stripe 15 to 1 15 to 1




Draw (TIE) 5 to 1 5 to 1

Losing Team (1 x Goalie Multiplier*) to 1 (1 x Goalie Multiplier*) to 1

Pay Table 3PRTP = 94.92%**

PRTP = 94.99%***

Pay Table 4PRTP = 92.06%**PRTP = 92.13%***










Draw (TIE) 5 to 1 5 to 1

Losing Team (1 x Goalie Multiplier*) to 1 (1 x Goalie Multiplier*) to 1

Only the highest achieved prize is paid out.* When Shot On Goal is awarded** PRTP% when Player is betting in every game*** PRTP% when Player is betting by optimal strategy

37


Big Roulette Poker side Bet for single Zero Roulette

The Big Roulette Poker Side Bet consists of three different wagers. The player may place a bet on any of the three wagers before each spin. Once a bet is placed on a wager, it cannot be removed or changed until the wager is resolved (maximum of 5 spins).

BLACK FLUSH This bets refers to following 4 spins after the bet is placed. If following 4 winning numbers are black numbers such as 2, 4, 6, 8, bet wins. If the 5th number is also black an additional payout is awarded.

RED FLUSHThis bets refers to following 4 spins after the bet is placed. If following 4 winning numbers are red numbers such as 1, 3, 5, 7, bet wins. If the 5th number is also red an additional payout is awarded.

STRAIGHTA bet will be placed on either STRAIGHT. First winning number after the bet is accepted will be called as BASE number. In the event the following 3 numbers will follow arithmetic sequence, bet on STRAIGHT will be a winning bet. If the 4th following result continues the sequence, an additional payout is awarded.Example: if the BASE number is 5, following 3 spins results should be 6, 7 and 8. If the next spin result is 9, an additional payout is awarded.

irregularities:• If BASE is 0: 1, 2 and 3 (and 4) are required to win.• If BASE is 36: 0, 1 and 2 (and 3) are required to win.• If BASE is 35: 36, 0 and 1 (and 2) are required to win.• If BASE is 34: 35, 36 and 0 (and 1) are required to win.• If BASE is 33: 34, 35 and 36 (and 0) are required to win.

38


Pay Tables for Big Roulette Side Bet - Single Zero Roulette

Pay OutPRTP = 88.86%

Flush bet Four Flush 10 to 1 Five Flush 20 to 1Straight bet Three straight 500 to 1 Four straight 20000 to 1

note. Switching Side Bet ON/OFF is set in InitialValues.exe program (tab “Multi Game”).

39


Bikini side Bet

Bikini side bet is a very simple version of a Side Bet for the Roulette game that gives a player the option of selecting one of six bikinis on a Button Deck LCD panel on the G5 Play Station (See Picture Below):

Before the game begins the writing “Choose your lucky Bikini” show up on Button Deck LCD panel. The player chooses the Bikini they believe that will show up on the model displayed on the IBGHL hologram stage at a predetermined time.

The “No more bets” event for Bikini side bet is synchronized with Roulette game. The “Clear all bets” button will also clear Bikini side bets. The history of bets for Bikini side is displayed on Roulette game recall screens.

The Roulette Generator is responsible for generating the outcome of the Bikini Side bet, the time period that the model will be displayed on the hologram stage and sending the results of the Bikini Side bet information to the IBGHL hologram screen.

The Bikini Side bet has two Pay Tables selectable in Initial Values:• 4:1 (PRTP = 83.33%)• 9:2 (PRTP = 91.67%)


40


inteRBloCk RoUlette gRaPHiCal PlayeR’s inteRFaCe

Credit Information

• Total: Displays the total of player’s credits.• Playable: Displays the amount the player can bet.

Interface Controls

• Cashout: When no bets are on the table, pressing this button will pay out the player’s credit via ticket printer or hand-pay, if the credit exceeds the limit for ticket payouts.

• Tip: Tipping is an option for the player to express one’s satisfaction with received service. Tipping is strictly personal choice of the player.

• Main information display: In this window player receives information on when to start placing bets, when to hurry up and when the bets are closed. Messages about errors which may occur on the Play Station are also displayed in this window.

• Call attendant: Signals the attendant of the gaming device and/or entering into operator menu.

• Flags: Changes the language of the entire player’s interface to the language of the highlighted flag.

41


Interface Controls

• Info menu: – Help/Rules: Displays the help screen. – Video: Video tutorials describing object of the game, how the game is played on Interblock

Play Station, and additional features, such as Side bets, Jackpot system…• Options Menu:

– Show Winnings: As the user places his bets, the possible winnings are displayed for each bet, if that number will be drawn. Possible winnings display is enabled or disabled by moving the slider.

– Fast bet: When this option is enabled player can simply draw his finger across all desired fields and the selected bet will be placed on each and every touched field.

– Number Orientation: This option allows player to set desired number orientation on Roulette table view to be vertical or horizontal.

– Show Bet Limits: Enabling the option change the display of the Roulette table into display of the bets limits for the different wagering options.

– Reserve Table: Enabling the option allows player to reserve a Play Station for a short time.• Change game: Exit the Roulette game and return to the Multigame menu. This button is

visible only if multiple games are available on the Play Station.

Touchdown Roulette Meter / Goal! Roulette Meter / Big Roulette Poker

Meter and Pay table for Roulette Side Bet.Meter is showing the temporary and the final result of the Touchdown Roulette or Goal! Roulette game.If the Big Roulette Poker Side bet is enabled, the Side bet table is visible.

Wheel bet View Button

Changes the table layout to wheel bet view, where the numbers are placed in circular order as they appear on the Roulette wheel. With wheel bet layout, the player can place bets only on single numbers.

Betting Information

• Bet: Displays the amount currently wagered on the table.• Win: Displays the amount won in the previous game.

inteRBloCk RoUlette gRaPHiCal PlayeR’s inteRFaCe - Cont.

42


Time for placing bets

• Displays the remaining time for placing bets. When the time expires, the game will begin.• Spin Ball: If only one player is present at the gaming device, he has an option to manually

start the game once he has placed at least a minimal bet on the table.

Roulette Table

A table where the player places his chips for wagering. The layout can be changed to “Wheel bet view”.

Special bets (Single Zero and Double Zero game)

• Vicini Dello Zero: Played with 9 chips placed: two on 0/2/3 street, two on corner 25/26/28/29, and one chip on each split: 4/7, 12/15, 18/21, 19/22, 32/35.

• Zero Game: Played with 4 chips: one on 26 straight up , and the rest on the splits: 0/3, 12/15 and 32/35.

• Serie 5/8: Played with 6 chips on the splits: 5/8, 10/11, 13/16, 23/24, 27/30, 33/36.• Orfanelli: Played with 5 chips: one on 1 straight up , and the rest on the splits: 6/9, 14/17, 17/20,

31/34.• Finali: Finali option means you are betting on numbers ending with the same digit, straight

up. (For example, Finali 5, means straight up bet on 5, 15, 25, 35)• Complete: With “Complete” option you are placing chips of the same value on all allowed

combinations of bets on a selected number (straight up, split, corner).• Red Snake: Played with 12 chips straight up on: 1, 5, 9, 12, 14, 16, 19, 23, 27, 30, 32, 34.• Red Splits: Played with 4 chips on four red splits: 9/12, 16/19, 18/21, 27/30.• Black Splits: Played with 7 chips on seven black splits: 8/11, 10/11, 10/13, 17/20, 26/29, 28/29,

28/31.• Neighbours: When a chip is placed on a single number (Straight up), pressing the “Neighbours”

button will place a chips of the same value on the two left and two right neighbouring numbers (as they lay on the Roulette wheel, not on the table). Pressing this option again will place the same bet on one additional left and one additional right neighbouring number, until maximum number of added bets is reached (set in G4Settings). Until that bets on all selected numbers start increasing.

• Hide special bets: By pressing this button all special bets buttons disappear from the players interface.


43


Denomination and Chips

• Denomination button: Setting the value of one credit and hence the value of the game. The selected value of one credit is displayed on the denomination button.

• Chips: 6 chips, each with different value that the player can select and place on the table. Values assigned to chips are defined with the selected denomination.If multi denomination is disabled, 7 chips are available.

Game controls

• Clear last bet/Clear all bets: Clears the last bet from the table. If pressed twice, all bets will be cleared from the table.

• Eraser: Selecting the Eraser icon player will remove all bets from the fields touched with his finger.

• Double bet: Doubles all bets on the table. If doubling all bets exceeds the player’s playable credit, only the first few bets will be doubled until the playable credit limit is reached.

• Repeat last bet: When “REPEAT LAST BET” button is pressed after the end of the game, it will repeat his bet from the previous game. If button is pressed for 3 seconds, “AUTO REPEAT BET” option is enabled. This option auto repeat last bet until the button is pressed again.

Last 36 results

Last 36 winning numbers are displayed in this window.


44


FeatURes oF tHe RoUlette PlayeR’s inteRFaCe

Placing Bets

Placing bets is permitted as long as there is a message on the screen saying “BETS PLEASE” or “LAST BETS PLEASE”. Chip value is chosen by pressing on one of the chips. Chip value is in credits and the value of one credit is displayed on the button DENOM.

Player can place bets in two ways:• Choose the chip with desired value and than press the field on the Roulette table, or simply

drag-and-drop the chip to the table. Pressing the same spot on the table again increases the bet for the currently selected chip value.

• Fast Bet: player can simply draw his finger across all desired fields and the selected bet will be placed on each and every touched field. This option can be enabled or disabled by pressing “FAST BET” button (when enabled the button is highlighted).

Player can cancel his last bet by pressing the “CLEAR LAST BET” button.If more then one bet has been placed on the table, the player can cancel all bets by pressing the “CLEAR ALL BETS” button.

When a player presses the “REPEAT LAST BET” button after the end of the game, it will repeat his bet from the previous game. If button is pressed for 3 seconds, “AUTO REPEAT BET” option is enabled. This option auto repeat last bet until the button is pressed again.

Fast Bet

Fast Bet option is enabled or disabled with the Fast Bet slider in the Options menu of the player’s interface.

Fast Bet slider

note. Enabling and disabling visibility of “FAST BET” option is set in G4Settings.exe program (tab “Touch Screen” in Param.ini).

45


Wheel Bet View

User has an option to switch between the table view, where he places the bets on a Roulette table and the wheel view, where the fields are placed in circle as they follow on the Roulette wheel.With wheel bet layout, the player can place bets only on single numbers.

Wheel bet view on Double Zero Roulette player’s interface

showing Possible Winnings

As the user places his bets, the possible winnings are displayed for each bet, if that number will be drawn. Possible winnings display is enabled or disabled with the Show Winnings slider in the Options menu of the player’s interface.

Possible winnings displayed in Double Zero Roulette player’s interface

Show Winnings slider

46


Show Bet Limits slider

Display of the bets limits in the Roulette table

Bet limits display

Show Bet Limits option allows player to review minimum and maximum allowed bets for different wagering options (Strait up, Split, Street...). Bet Limits display is enabled with the Show Bet Limits slider in the Options menu of the player’s interface.Enabling the Show Bet Limits slider change the display of the Roulette table into display of the bets limits for the different wagering options. Bets limits are shown until the player touches the display again.

47


Number Orientation slider

number orientation

Number Orientation option allows player to set desired number orientation on Roulette table view to be vertical or horizontal. Number orientation is selected with the Number Orientation slider in the Options menu of the player’s interface.

Horizontal number orientation Vertical number orientation

Reserve Table slider

Reserve table

Reserve Table option allows player to reserve a Play Station for a short time. This option is selected with the Reserve Table slider in the Options menu of the player’s interface.Enabling the Reserve Table slider display sign “RESERVED” over the Roulette table. The sign is shown until the player touches the display again.

note. Reserved Table option is set or modified inG4Settings.exe program (tabs “Other settings” in Param.ini).

48


multi denomination

This option gives the player a choice to set the value of 1 credit and hence the value of the game. That means higher denomination is selected, higher bets and higher potential wins are possible.

The operator of the gaming device gains further options to set in the game, such as:• Denomination values in cents

Operator can set up to 5 denomination values in cents.• Minimum and maximum bets can be set on each denomination separately

The multi denomination option gives the operator a choice to set the minimum and maximum bet limits for each denomination.

• Denomination schedulingThis feature of the multi denomination option brings a 24/7 schedule when certain denominations are active, and according to this when certain bet limits are available.

note. Denomination settings, denomination timings and bet limits are set in G4Settings.exe program (tabs “Common game settings”, “Game settings” and “Denomination Timings” in Param.ini).

49


tipping

Tipping is an option for the player to express one’s satisfaction with received service. Tipping is strictly personal choice of the player.

Tipping a casino dealer or other casino employee• Tip can be given at any time during the game process.• Press the button “TIP”.• Choose apropriate chip value for tipping.• Place selected chip or chips in the TIP BOX.• Press “Print”button to print a Tip Ticket.• Give the Ticket to the person you want tip.

If you select a wrong tip value press button “Cancel”.

note. Tip Ticket could be cashed only at the Casino Cage and could not be inserted in any gaming device.

50


multi language support

The player’s interface already supports many world languages (on display and voice).

51


PRogRessiVe JaCkPot systems FoR inteRBloCk RoUlette games

Progressive Jackpot System gives the casinos an additional incentive for the players and increases the potential attractiveness of the gaming site on the whole.Jackpot is an opportunity for an additional win created by players themselves since it is accumulated by the bets made on the gaming device.

mystery Jackpot

Jackpot hit value is randomly selected, based on the probability table set in Mystery Jackpot settings (InitialValues.exe program) Players, whose cumulative bet is at least predefined amount of money are eligible to win jackpot.

Jackpot current value displayed on the Player’s Graphics Interface (on Play Station) is incremented by Jackpot Controller based on increment % and “Sum of bets” from all Play Stations. Every time the current jackpot value is changed, the new value is displayed on the Play Stations and on PID screen.

If anticipation mode is enabled: when current jackpot value almost reaches the calculated jackpot hit value, the anticipation mode is started on the Play Stations.

When current jackpot value reaches the calculated jackpot value, one of the players who are eligible in this game is selected and jackpot is awarded to him.Trigger for hitting jackpot is that jackpot reaches a previously calculated value.The chance that the player is awarded with the Jackpot is increased by sum of all bets on all Play Stations.

52


mystery Jackpot settings

Min stake to participate (cents)This is the criteria that determine which PlayStations are eligible to win jackpot. Only players who bet this predefined minimum are eligible to receive a jackpot.

JackPot initial and maximum value Range for jackpot value in which jackpot will hit. Values are in currency.

Total cash in for jackpotValue represents the Sum of all the bets required to reach the Jackpot maximum value. This determines how much the current jackpot value increases with each bet (increment %).important: Increment (in %) added to RTP must be less than or equal to 100%.

Probability tableSet the hit ranges and their probabilities that Jackpot will be paid out in defined range.Value set in the first row must be equal to the Jackpot initial value setting. Value set in the last row must be equal to the Jackpot maximum value setting, so that the whole range from start to the maximum value is covered. Sum of all Percentages must be exactly 100%! If you don’t need 7 ranges, you can define only several, and leave others on “0”.

Start jackpot show at the current value of Jackpot minus random range before it hits (in $€)Setup for Anticipation mode: a random value is calculated between “From” and ”To” value. When actual Jackpot value reaches the calculated Jackpot hit value minus this new random value, Play Stations enter into Anticipation mode. If these values are set to 0, anticipation mode is disabled.Example:Jackpot hit value, determined by jackpot controller is $150. “From” value is set to 5 and “To” value is set to 10. Anticipation mode in this case will be randomly selected by the jackpot controller in a range at the current jackpot value from $140 to $145.Elektroncek is NOT recommending enabling this option.

Game Types EnabledBy enabling the specific game, Generator becomes Jackpot Controller (JP Controller) for the selected game type (e.g. Roulette 0).That means JP Controller collects stakes from connected Play Stations (not necessarily playing on Generator which is JP controller) for all game types defined. It does not matter what kind of game type Generator is currently running. JP Controller increases JP value from stakes participating in this JP controller.If no game type is selected, all games played on this Generator participate on this JP. (E.g. if Generator is dice, Sic Bo and Craps played on this Generator will participate to this JP. If Sic Bo or Craps is played on any other Generator, stakes are not sent to this JP controller).

note. Option, if Jackpot minimum value is displayed on Player’s Graphics Interface, is set in G4Settings.exe program (tab “Common game settings” in Param.ini).

53


Roulette mystery Jackpot Based on Wins straight numbers

Jackpot hit value is randomly selected, based on the probability table set in Mystery Jackpot settings (InitialValues.exe program).Players, whose cumulative bet put on straight numbers is at least predefined amount of money are eligible to win jackpot.

Jackpot current value displayed on the Player’s Graphics Interface (on Play Station) is incremented by Jackpot Controller based on increment % and “Sum of bets” from all Play Stations. Every time the current jackpot value is changed, the new value is displayed on the Play Stations and on PID screen.

If anticipation mode is enabled: when current jackpot value almost reaches the calculated jackpot hit value, the anticipation mode is started on the Play Stations.

When current jackpot value reaches the calculated jackpot value, one of the players who are eligible in this game is selected and jackpot is awarded to him.Trigger for hitting jackpot is that jackpot reaches a previously calculated value.The chance that the player is awarded with the Jackpot is increased by sum of all bets on all Play Stations.

54


Roulette mystery Jackpot Based on Wins straight numbers settings

Min stake to participate (cents)This is the criteria that determine which Play Stations are eligible to win jackpot. Only players whose cumulative bet put on straight numbers is at least here defined amount of money, can hit the jackpot.


Total cash in for jackpotValue represents Sum of all bets to reach the Jackpot maximum value. This determines the factor (the increment in %), how much will the current jackpot value increase for every bet.Important: Increment (in %) added to PRTP must be less or equal 100%.

Probability tableSet the hit ranges and their probabilities that Jackpot will be paid out in defined range.Value set in the first row must be equal to the Jackpot initial value setting. Value set in the last row must be equal to the Jackpot maximum value setting, so that the whole range from start to the maximum value is covered. Sum of all Percentages must be exactly 100%! If you don’t need 7 ranges, you can define only several, and leave others on “0”.

Start jackpot show at the current value of Jackpot minus random range before it hits (in $€)Setup for Anticipation mode: a random value is calculated between “From” and ”To” value. When actual Jackpot value reaches the calculated Jackpot hit value minus this new random value, Play Stations enter into Anticipation mode. If these values are set to 0, anticipation mode is disabled.Example:Jackpot hit value, determined by jackpot controller is $150. “From” value is set to 5 and “To” value is set to 10. Anticipation mode in this case will be randomly selected by the jackpot controller in a range at the current jackpot value from $140 to $145.Elektroncek is NOT recommending enabling this option.

note. Option, if Jackpot minimum value is displayed on Player’s Graphics Interface, is set in G4Settings.exe program (tab “Common game settings” in Param.ini).

55


golden Chip Jackpot

Golden Chip Jackpot system is a mix of Mystery and Event driven Progressive system.

Golden Chip is a system where participant is randomly (mystery) selected. The Jackpot value is awarded if the player determined event matches the random result.

GOLDEN CHIP is a chip, which has no pre-determined value (no credits). It is this chip which gives the player the possibility to win the whole Jackpot value.

Only one player can be awarded the GOLDEN CHIP in a single game.

Player functionality description

In order to qualify for a Golden Chip progressive jackpot, a player has to meet an IB predetermined criteria (“Min stake to participate”). A player who has met the criteria on the spin that a Golden Chip is randomly awarded, will have a chance to randomly receive a GOLDEN CHIP (according to the “How to determine winning station” setting).

The Player will then place this GOLDEN CHIP on any number or group of numbers for the following spin. If the player does not place the GOLDEN CHIP before the “Last bets” indication, the chip will be placed randomly on a straight number.

If the number comes up, then the player wins the Golden Chip progressive jackpot (Zero credit value does not prevent the player from winning the Jackpot).

If the GOLDEN CHIP was placed on a split or corner bet, only 50% (split) or 25% (corner) of the whole Jackpot value will be paid. If there is no winner, then the Jackpot will build up by the IB predetermined percentage.

When the Jackpot is won, it will reset to the initial value.

Multigame functionality description

The Golden Chip Jackpot starts at “Bets please” with Golden Chip selection attraction mode (animation on the screen, LED show). Only one player can be awarded the Golden Chip in a single game.

After the Golden Chip selection mode, the player has the ability to put the GOLDEN CHIP, which has no value (no credits), on a straight, split or quarter number. If the player does not place the GOLDEN CHIP before the “Last bets” indication, the Golden Chip will be placed randomly on a straight number. If the Golden Chip is placed on a winning number, the Jackpot will be paid out.

56


Generator scenario description

The Jackpot is only available for games played on a specific Game Generator, because the trigger for starting the Jackpot is the number of station games played (per Generator) with stakes that meet the “Min stake to participate” criteria.

The Golden Chip is awarded according to the values defined in the “Frequency” option in the InitialValues program.

The Golden Chip Selection is started on the next “Bets please” cycle. After the Golden Chip selection mode is done, the Game Generator restarts the timer so that players have the same amount of time for betting.After the game in which a Golden Chip is awarded ends, the position of the Golden Chip is sent to the Game Generator, which determines whether a Jackpot is won. The Golden Chip Jackpot can be won on Straight, Split and Quarter bets in the Roulette game.

note. Option, if only bets on straight numbers are allowed is set in G4Settings.exe program (tab “Roulette game settings” -> “Golden Chip Only on Straight” in Param.ini).

57


golden Chip Jackpot settings

Min stake to participate (cents)This is the criteria that determines which Play Stations are eligible to win the jackpot.Only players who bet this predefined minimum are eligible to receive a Golden Chip.


Total cash in for jackpotValue represents the Sum of all the bets required to reach the Jackpot maximum value. This determines how much the current jackpot value increases with each bet (increment %).important: Increment (in %) added to RTP must be less than or equal to 100%.

FrequencySelect a range of played games (with stakes) on the Game Generator, where “Golden Chip” will be be awarded.• Min. number of games played since last GC awarded – Value represents the minimum number

of games to be played since the last awarded “Golden Chip” (total Play Stations games that meet “Min stake to participate” criteria).

• Average number of played games till GC is awarded – Average number of games played since the last awarded “golden Chip” (total Play Stations games that meet “Min stake to participate” criteria).

How to determine winning station• Normal random – winning station is randomly selected between all stations which meet the

“Min stake to participate” criteria.• Linearly weighted random – random selection of wining station is linearly weighted according

to the percentage share of single station bets in total sum of all stations bets on which the “Min stake to participate” criteria is met.

Hidden JackpotHidden jackpot value is used to fill up visible initial jackpot value after RAM reset or Jackpot payout.After each resolved bet, part of this bet (defined by increment in %) is added to jackpot logic. This logic then determines how this jackpot increment is divided between visible and hidden jackpot.

Hidden jackpot can be incremented when:• Hidden jackpot value is less than initial jackpot value• Visible jackpot value is more than maximum jackpot value (whole jackpot increment is given

to hidden jackpot value)

Hidden jackpot is not incremented when it reaches Jackpot initial value and visible jack-pot value is below maximum value.

58



Common Procedures

59


CRedit PRoCedURes at tHe Play station

Credit increment

Players can increment their credit via bills or tickets, which are inserted in the bill acceptor in the Play Station.

Cash in with bills or tickets• Bills and tickets can be inserted facing any direction or side.• Upon inserting the bill or a ticket, wait until the acceptor checks it (if not valid, it will be

returned).• If the bill/ticket is correct, the credit is displayed on the screen.

Credit can also be incremented using registered contactless card with authorized access level 8. By default this option is disabled.

Credit Redemption

When the player wishes to leave the game, he can collect his credit via ticket printer or via hand-pay procedure. Payout is not possible if the game is currently in progress or if there are some bets still on the table.

Cash out credit with a ticket printer1. Player presses the button “Cashout” on touch screen.2. The screen displays: “Pay out” .3. The ticket printer will start printing the ticket.

Cash out credit with a ticket printer when Casino staff is neededThe Hand-pay procedure is performed by casino staff when the Cash out limit is exceed: 1. Approach the contactless card (make sure the card has sufficient Authorization level for

performing Hand-pay).2. A confirmation sound will be played and the “Audit mode” message will appear on the top of

the screen.3. Press the button “Cash out” on the touch screen.4. The screen displays: “Pay out”.5. The credit will be reset to 0. Player collects his winning at the cash register.

60



Operator Menu

61


tHe oPeRatoR menU

The operator menu allows authorized staff to set the bet limits on chosen station, review various statistics and counters, lock/unlock the chosen station, stop the current game and restart or shut down the gaming device.

The operator menu can be accessed using a contactless card on any Play Station in the gaming device. Most settings are effective in the entire gaming device, with a few exceptions (lock the station, shutdown the station, etc.). In these cases you’ll need to access the operator menu on the desired Play Station. Several cards can be added in the menu itself and each of them can have a specific authorization level assigned, as a prevention of unauthorized access to confidential data and settings.

accessing the operator menu

As the G5 gaming device is in play mode, the user interface for placing bets is displayed on all stations, unless the screen saver is activated or the Play Station is turned off.

The operator menu can be accessed by approaching the contactless card to the “Interblock” reader. The “Audit mode” message will appear on the top of the screen. Keep the card on the reader and then press the “Call Attendant” button.

The operator menu will appear. It consists of 20 menu items, each corresponding to a different function. Access the desired item by pressing the corresponding button.

62


setting the Roulette Betting Parameters

The betting parameters for Roulette game can be accessed by entering the operator menu from the Roulette game and in the operator menu pressing “1 - Parameters” button.

Note: Button “1 - Parameters” in the operator menu is visible only if the front door of the computer cage (Logic door 3) is open.

As the gaming device is delivered to the customer, the betting parameters have already been set to comply with the rules and standards of the local gaming regulatory. The operator can, however, modify the following parameters:

Speech volume Specifies the volume of the speech that announces results and game progress (0-min, 100-max, default value is 40).

Sound Effects volume Specifies the volume of all sound effects other than speech (0-min, 100-max, default value is 40).

Send sound settings to all stations Updates the current sound settings (speech and effects) to all Play Stations.

Mute Mute speech but doesn’t mute sound effects.

Limit Straight up (x 36) Define maximum and minimum value of bet (in credits) on a single number. The payout for winning a straight up is 36x the bet.

Limit Split (x 18) Define maximum and minimum value of bet (in credits) on a two numbers simultaneously. The payout for winning a split is 18x the bet.

Limit Street (x 12) Define maximum and minimum value of bet (in credits) on three consecutive numbers simultaneously. The payout for winning a street is 12x the bet.

Limit Corner (x 9) Define maximum and minimum value of bet (in credits) on four numbers simultaneously. The payout for winning a corner is 9x the bet.

Limit First Five (x 7) *00 Define maximum and minimum value of bet (in credits) on first five numbers simultaneously (0, 00, 1, 2 and 3). The payout for winning a first-five is 7x the stake.This parameter is valid for double-zero Roulette only.

63


Limit Six line (x 6) Define maximum and minimum value of bet (in credits) on six consecutive numbers simultaneously. The payout for winning a six line is 6x the bet.

Limit Columns/Dozens (x 3) Define maximum and minimum value of bet (in credits) on a column or dozen numbers simultaneously. The payout for winning a column or a dozen is 3x the bet.

Limit Simple bets (x 2) Define maximum and minimum value of bet (in credits) on a simple bet (black/red, odd/even, high/low). The payout for winning a simple bet is 2x the bet.

Limit Split Column/Dozen (x 1.5) Define maximum and minimum value of bet (in credits) on a Split Column/Dozen bet (bet between columns and/or dozens). The payout for winning a Split Column/Dozen bet is 1.5x the bet.This bet is available for specific jurisdictions only.

Limit Touchdown side bet Define maximum and minimum value of bet (in credits) on a Touchdown Roulette side bet. The payout for winning a Touchdown side bet is calculated according to the selected Pay Table for this side bet.

Limit Goal side bet Define maximum and minimum value of bet (in credits) on a Goal! Roulette side bet. The payout for winning a Goal! side bet is calculated according to the selected Pay Table for this side bet.

Limit Poker Flush side bet Define maximum and minimum value of bet (in credits) on a Big Roulette Poker side bet (Flush bet). The payout for winning a Poker Flush side bet is calculated according to the selected Pay Table for this side bet.

Limit Poker Straight side bet Define maximum and minimum value of bet (in credits) on a Big Roulette Poker side bet (Straight bet). The payout for winning a Poker Straight side bet is calculated according to the selected Pay Table for this side bet.

Limit Bikini side bet Define maximum and minimum value of bet (in credits) on a Bikini side bet. The payout for winning a Bikini side bet is calculated according to the selected Pay Table for this side bet.

Max total stake on board (in cents) Define the maximum value of bets (in cents), which can be placed on the station in one game.

Min total stake on board (in cents) Define the minimum value of bets (in cents), which can be placed on the station in one game.

Default language Enter the number of language, which will be the default language in player’s interface on that station.

setting the Roulette Betting Parameters - cont.

64


Set for this station If you have entered new date and time, pressing this button will set them on this Play Station.

Set for all station If you have entered new date and time, pressing this button will update them on all Play Stations.

Denomination value (in cents) Set the denomination value (in cents) for the selected denomination number (below).

You are viewing denomination number:

Select the denomination number you wish to see or reset. The currently selected denomination in indicated with the red number.

Send these settings to all stations Sets the currently selected denomination on all stations connected to the designated center unit.

setting the Roulette Betting Parameters - cont.

65


managing Contactless Cards

In the G5 gaming device contactless cards are used to access the operator menu, review event logs, and to perform hand pay payouts when the device is in play mode. In the operator menu, you can add, remove and review the cards in the system, and assign each of them its own authorization level.

There are 8 levels of authorized access:

Function LeveL 1 LeveL 2 LeveL 3 LeveL 4 LeveL 5 LeveL 6 LeveL 7 LeveL 8

the

ope

rato

r m

enu

Parameters

History of bets

Bets / profits on stations

Long IN/OUT counters

Short IN/OUT counters

Other counters – short

Other counters – long

On line counters

Reset counters

Center

Radio cards

Hoppers

Lock / Unlock station

Last bill transactions

Events log

Touch screen calibration

Shut down options

Hardware diagnostics

66


Function LeveL 1 LeveL 2 LeveL 3 LeveL 4 LeveL 5 LeveL 6 LeveL 7 LeveL 8

even

t Lo

Gs

Access log – private

Access log – common

Access log – center

Local errors

Center errors

Communication local

Communication center

On-line local

On-line center

Game events local

Game events center

Power up/down

c.m

. Credit In

Credit Out

The cards menu can be accessed by pressing “11 - Radio cards” button on the operator menu. A list of cards will appear, allowing you to view, edit and delete the highlighted card, as well as add new cards to the system.

The following information is displayed in the list of cards:• Card ID: Unique identification number of the

contactless card.• Access Level: The Authorization level of the

card.• Username of the card owner.• Hand pay: The amount of credits paid out by

hand-pay with the selected card.• Cash in: The amount of credits incremented

by the card owner.

67


adding new Cards & editing existent Cards

New cards can be added by pressing on the “New” button. A window will open, asking you to enter the Card ID and the number of authorization level (Rights). Card ID is entered simply by approaching the contactless card to the “Interblock” reader on the station, and the ID code in HEX will display in the “Card ID” field. If you desire, you can enter the code manually using the on-screen keyboard.

Press the “OK” button to add the card into the system. The card will be valid on all stations on the gaming device.

Contactless cards in the list can also be edited. The editing window is identical to “Add new card” window. You can change the card ID code and the authorization level. Save your changes by pressing the “OK” button.

68


Review History of Bets

The history of bets is displayed in a chronological order with a screenshot of the user interface for each game. The player’s bets are indicated with betting chips as they were placed in the game. Use the arrow buttons to navigate back and forth through different games.In Multigame environment games appear in the history of bets as they were played chronologically on the respective Play Station.

The following information about the game is displayed:• Bonus: Credits awarded in the game.• Bet: Amount of credits wagered during this game.• Win: Amount of credits won during this game.• Initial Credit: Credit value at the beginning of this game (after last cash out or received bonus

preceding the start of this game.)• Final Credit: Credit value after last cash out or received bonus at the end of this game.• 1 Credit: The value of one credit in local currency.• Date & Time: Exact date and time of when the game started.• Pay in: Amount of credits paid in the gaming device during this game.• Pay out: Amount of credits paid out during this game.• Game #: The number of the game. First and last game in chronological order are labeled “First

game” and “Last game” respectively.• Glow around the table: The color of the glow define to which center displayed history belongs.

Glow is visible, if in G4Settings.exe program (tab “Game settings” in Param.ini) option “Show center color glow” is set to True.

• Log: Display of the Log window for overview all events that have occurred during single game recall record.

69


game Recall Record

Credit meters in History of Bets display all information logically related to the game displayed on each recall screen.Breakpoint that separates which credit-related events go to previous or next game (game recall record) is last “Cash out” or “Bonus” event. All events preceding the last “Cash out” or “Bonus” events are attributed to previous game.

IN IN IN IN IN INOUT OUT

BONUS BONUS BONUS

Game

Game Recall Record

Game

note. The history of bets is stored in a separate database and is not affected by “Reset counters” procedure. On the other hand “Ram reset” operation clear history of bets database.

note. Option, if in history are stored all games with credit or just games with bet on, is set in G4Settings.exe program (tab “Other settings” in Param.ini).

70


History log

Operator could review all events that have occurred during single game recall record on the Log window.

If a checkbox “Transactions only” is marked with a checkmark, only credit transactions are displayed.

If a checkbox “Transactions only” is unmarked, all events that have occurred during single game recall record are displayed.

Credit transaction records are colored to be distinguish from non-credit events.• Red: Game events• Green: Pay In events• Blue: Pay Out events• Yellow: Bonus events

71


Review Periodical in/oUt Counters

The first type of counters are the Periodical (Short) IN/OUT counters, which show the relation between Bets/Wins and Cash IN/Cash OUT on each Play Station. Press the “3 – Periodical IN/OUT” button in the operator menu to access them. A bar graph is shown, indicating the amount of credits wagered and the amount of credits that the players won – profit/deficit for the player and another bar graph, indicating the amount of cash inserted and paid out of the station – profit/deficit for the owner. Exact figures are displayed in a table, indicating stakes, wins, cash IN and cash OUT for that station. The percentage of profits per wages is shown at the bottom.

Review long & short in/oUt Counters

The IN/OUT counters display the amount of credits inserted (paid-in) and the amount paid out for all Play Stations. All methods of credit increment and redemption that the gaming device supports are accounted. Long counters display the credit IN/OUT data since the last Ram clear operation, while short counters display the data from the last short counters reset. Press “3 – Periodical IN/OUT” button, to view periodic counters on that Play Station. Press “4 - IN/OUT counters - long” or “5 - IN/OUT counters - short” button in the operator menu to review long or short counters respectively.Credit IN/OUT values are represented with bar graphs, with exact values displayed in a table, where the profit for the owner (difference between IN and OUT values) is also indicated for each individual station.Pressing “Change accounting unit” button switch the display of values in a table. Values can be represented:• in unit of selected currency (€, $,...),• in 1/100 unit of selected currency (cents),• in credits.

72


multigame Counters (for multigame environment only)

When the gaming device is set up in a multigame environment, where more than one game is available to the players to access from a single Play Station (Roulette, Sic Bo, BlackJack, Baccarat, etc.), Multigame counters provide the exact data for each individual game. Multigame counters can be accessed in either Short or Long IN/OUT counters menu by pressing the corresponding button.

Data for each individual Play Station is displayed. Play Stations are clearly numbered for differentiation from other play stations and user can also get accounting for whole group of Play Stations. User can view this data by pressing the button »UP« or »DOWN«.

Multigame counters will be displayed in a table, with exact data for Stake, Win, Percentage and the number of games for each game connected to the multigame environment.

note. To view data from all online Play Stations on the gaming device, click the “Get accounting for all” button.

note. To view Multigame counters, press the “Multigame meters” button in either Short or Long IN/OUT counters menu.

73


Review long & short other Counters

“Other” counters represent all countable data in all the Play Stations in the gaming device. Press button number 6 or button number 7 in the operator menu to review short or long “Other” counters respectively.

A table is displayed with information about the current station, including how many times the station cover was lifted, how many coins were inserted via coin acceptor, how many coins were paid out through coin hopper, etc. As well as the IN/OUT counters, short counters display data from the last short counters reset, while the long counters display values from the last “Ram clear” operation.

note. To view data from all online Play Stations on the gaming device, click the “Get accounting for all” button.

note. Other Counters definitions and display options are set in InitialValues.exe program (tab “Counters”).

74


online Counters

Online counters display the data sent to the online system. If the gaming device is connected to the online system, the button “8 – On-line counters” will appear in the operator menu. If not, the button will not be displayed.The online counters display data from all counters on all stations sent to the online system.

last transactions

The Last Transactions menu will show you the logs of all possible IN/OUT transactions via bills, coins, tickets, bonus, cashless increments or redemptions and hand pay. Simply click on the desired method and the log will be displayed in a window, showing all transactions of that type with the exact date, time and amount specified. The last option “Last Bill Transactions” will open a new window with exact statistics of the bill acceptor.

The “Last Bill Transactions” window will show you the exact statistics for all types of supported bills, as well as the last 5 transactions done by inserting the bills. You also have an option to reset the bill validator in that window and view the details of the bill acceptor, stacker, enabled bill types and their value in credits.

75


The reset counters menu gives you the following options:• IN/OUT counters – short: Resets only the IN/OUT

short counters on that Play Station.• Other counters – short: Resets all “Other” short

counters data, except the IN/OUT data on that Play Station.

• IN/OUT on radio card: Resets all data about credit increment and redemption done by the contactless radio cards on that Play Station.

• Ram reset: Clears all electronic counters on that Play Station. “Ram reset” operation also clear history of bets database.

Reset Counters

G5 Diamond gaming device contains electronic (software) counters, which can be reset. Press button “9 – Reset Counters” in the operator menu to enter the Reset counters menu, where you can reset all the electronic counters in the gaming device.

note. Proper authorization level of the contactless radio card is required to reset counters. Which counters you’re allowed to reset also depends on your authorization level. See the “Radio cards” section for information on different authorization levels.

CaUtion! Once performed, the “Ram reset” operation cannot be undone. Make sure the operation is well intended before proceeding. Front door of the computer cage (Logic door 3) MUST be opened for the “Ram reset” option to appear in the menu.

76


Basic Center Unit Commands

Through the operator menu, you can manually perform some basic commands of the G5 Diamond Game Generator, when you press button “10 – Center” in the operator menu. These manual commands are useful for fast maintenance operations (e.g. cleaning the gaming device) and for testing those commands after the device has just been installed. To test those commands, you must first stop the game, so the “Stop game” command was added to this menu.

You have the following manual center commands available:• Stop game/Continue game: Immediately stops the game – even if the player on some other

station is placing bets. Pressing the button again returns the gaming device to play mode.• Center cover up: Starts the mechanism for lifting the cover of the center unit.• Center cover stop: Stops the center cover in the current position.• Center cover down: Starts the mechanism for lowering the cover of the center unit.• Magazine controls: Open the balls magazine control window.• Center up/down: Lifts the center cone. If the ball is in one of the pockets, lifting the cone will

cause it to fall into the start position.• Create IBOnline Offline dump: Initiate offline data dump to USB key.• Collect center data to Center USB: Copies the entire data of the center unit to a USB key,

which must be inserted in the USB port on the PC in the center unit.• Collect data: Copies the entire data of that Play Station to a USB key, which must be inserted

in the USB port on the PC in the Play Station.

CaUtion! When lifting the center cover, you must use the “Center cover stop” command when the cover reaches its peak position. The cover motors won’t stop automatically at the peak position and not stopping them could result in a damage of the mechanism!Do not use the “Center cover stop” command when lowering the cover! The cover mechanism will shutdown automatically once all three switches are covered. Using the “Center cover stop” command will result in a game not restarting properly!

77


advanced Center Unit Commands

The Advanced commands will only become available if you open Logic Door 3 (cover of the Logic Area 2, where the connectors are situated) prior to entering the operator menu. The Advanced commands allow you to distribute the settings to all the Play Stations, update the software and distribute the updated software to all the Play Stations.

Distribute EXE:When you’ve updated the software on the Play Station, use the “Distribute EXE” command to automatically update software on all Play Stations. (This procedure should be carried out only by the manufacturer certified personnel.)

Distribute settings:Press the “Distribute settings” button to distribute all the parameters you’ve set in G4Settings.exe program (Param.ini) to all the Play Stations in the gaming device. (This procedure should be carried out only by the manufacturer certified personnel.)

Secure key upgrade:The software can be automatically updated from a secure USB flash key, provided by the manufacturer. When you insert the flash key in one of the USB ports in Logic Area 2, press the “Secure key upgrade” button to begin the upgrade process. The Play Station will restart and begin upgrading the software from the USB flash key.

CaUtion! If you’ve performed the “Ram reset” operation, using the “Update settings” will cause the reset of all counters on all the Play Stations!

78


lock or Unlock Current station

Through the operator menu, you can lock each Play Station. Locking the station disables its user interface, preventing any bets to be placed through that station until it’s unlocked. Press button “14 – Lock station” in the operator menu to lock the station. Pressing the button again will unlock it.

Review event logs

The G5 Diamond gaming devices keeps logs of all the events that happen on the stations and center units. On each station, you can review the event logs from all the stations in the gaming device as well as all the center units. Press button number “15 – Event logs” in the operator menu to review the event logs.

note. Proper authorization level of the contactless radio card is required to review the event logs. Which event logs you’re allowed to review also depends on your authorization level. See the “Managing contactless cards” section for information on different authorization levels.

79


Component diagnostics

On each Play Station, you can perform basic hardware diagnostic of the electronic modules inside the station. Press button “16 – Components diagnostic” in the operator menu to enter the Hardware diagnostics.

A window will open, displaying a table of all the electronic modules in the station, as well as the programs that run on the PCs in the center unit and Play Station and the following information:• Serial number of the module. Center and Play Station programs do not have serial numbers.• Factory ID: Factory ID of the module. Center and Play Station programs don’t have Factory ID

numbers.• Version of the software. For electronic modules, it’s the version of the software on the module

itself.• Production date: Production date of the module/program.• Current checksum: Checksum of the software currently installed on the module/PC.• Required checksum: Checksum of the software, which was installed when verified and

confirmed by the local gaming regulator.• Ram reset if changed: Indicates if the gaming device will perform a “Ram reset” operation

on the Play Station if the “Current checksum” value does not match the “Required checksum” value anymore.

• Lock if changed: Indicates if the gaming device will lock the Play Station if the “Current checksum” value does not match the “Required checksum” value anymore.

• Active: Indicates if the module/program is currently active.

By pressing the “View / Edit selected” button, a new windows opens, displaying the information of the highlighted module or program. In this window, you can activate or deactivate the selected module/program, and set if the gaming device will perform “Ram reset” operation or lock the Play Station, if the checksum does not match the required value any more.

80


shutdown and Restart of the gaming device

When you wish to shut down or restart the entire Diamond gaming device, or just an individual Play Station, enter the Shutdown menu by pressing button “17 – Shutdown options” in the operator menu.

You have the following shutdown/restart options:

Options for center or entire gaming device• Shut down machine: Shuts down the entire center unit and all Play Stations. When you wish

to switch it on again, you must use the key on the switch box.• Restart machine: Restarts the entire center unit and all Play Stations. After restart, the gaming

device will automatically enter play mode.• Stop all games: Immediately stops all games – even if the player on some other station is

placing bets. Pressing the button again returns the gaming device to play mode.• Close table: The gaming device will countdown [x] games (setting on the center unit, where

[x] is number of games to the end after table closed procedure is started), and after the last game cycle is completed, the game will be stopped. Pressing the button again returns the gaming device to Play mode.

• Shut down currently active (for multigame environments only): Shut down currently active center unit and adjacent Play Stations which are set in “Center.ini”.

• Restart currently active (for multigame environments only): Restart currently active center unit and adjacent Play Stations which are set in “Center.ini”.

Options for current Play Station• Shut down this station: Shuts down only the Play Station. When you wish to switch it on

again, you must manually start it from the inside of the station.• Restart this station: Restarts only the Play Station. After restart, the station will display the

user interface again.• Restart program: Restarts the software on the Play Station.

81



Maintenance

82


saFety PReCaUtions

CaUtion! The gaming device must be shut down before any replacing parts or servicing activity inside the device is performed.

CaUtion! No repair of the parts or modules is allowed during the warranty period.

CaUtion! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. This refers to the lithium battery on the PC motherboard.

CaUtion! Only qualified and trained personnel can perform maintenance of gaming device. The procedures should be strictly followed in order to avoid any injuries of people or damages to gaming device.

WaRning! Prior to bigger maintenance operations, disconnect the gaming device from mains supply.

83


geneRatoR maintenanCe inteRVals

To prevent unwanted malfunction on your G5 Diamond gaming device, it is recommended that preventive service interventions are periodical. To ensure optimum performance and long life of your gaming device, service interventions should be carried out by the manufacturer certified personnel.

The following G5 Diamond Game Generator maintenance operations should be performed regularly:

Daily maintenance: • Clean the outer surface of Game Generator

Weekly maintenance: • Clean the Roulette cylinder - Roulette gen.• Replace the cards (not necessary a weekly procedure - it should be done after 220 shuffling

processes - Card generator will alert operator to change the cards) - Card gen.

Monthly maintenance:• Restart the computer on G5 Diamond Generator• Mechanical parts check• Tube and rim cleaning - Roulette gen., Bubble gen.• Ball replacement (Balls should be replaced each trimester or earlier, if balls become too dirty)

- Roulette gen.• Balls replacement (Balls should be replaced every two (2) months or 130,000 game cycles) -

Bubble gen.• Blower filter replacement (Filter should be replaced every six (6) months) - Roulette gen.• Blower filter replacement (Filter should be replaced every three (3) months or 200,000 game

cycles) - Bubble gen.

Yearly maintenance: • Mechanical cleaning• Fan replacement (ball blower and other)• Dice replacement (dice should be replaced after 500,000 games) - dice gen.• Transmission belt replacement (between motor and vibration table) - dice gen.• Vibration table fabric replacement (it should be done whenever you see that the fabric on

vibration table is wear out or damaged) - dice gen.• Electrical components check (TestBoards) and cleaning• PC maintenance (cleaning, contact cleaning,…)• Check alignment of optical sensors• Check all moving parts (motors, bearings, shafts,…).• Power supply check

84


• Check gap between rim and rotator - Roulette gen.• Modules firmware check (optional upgrade to newer version - based on (new) certificate!)

geneRatoR maintenanCe inteRVals - cont.

Yearly maintenance:

note. Prior to all maintenance operations, stop the current game. See the chapter “Operator Menu” for detailed instructions how to stop the game.

85


Play station maintenanCe inteRVals

The G5D Diamond Play Station requires regular maintenance in order to function properly. The following Play Station maintenance operations should be performed regularly:

Daily maintenance:• Clean the outer surface of the Play Station• Empty the bill stacker• Check the level of paper in ticket printer.

Monthly maintenance:• Restart the computer on G5 Diamond Play Station.

Yearly maintenance:• Mechanical cleaning (dust,…).• Fan replacement.• Electrical components check (TestBoards) and cleaning.• PC maintenance (cleaning, contact cleaning,…).• Power supply check.• Modules Firmware check (optional upgrade to newer version - based on (new) certificate!)

Gaming device is equipped with electronic components, which attracts dust from the air, so at least once per year thorough cleaning is needed. Electronic components are producing a lot of heat, so optimal performance of fans is requested.

In order to ensure full operation and best possible performance of electrical components, preventive check of functionality must be performed once per year. Electronic equipment is powered with the power supply, which should be calibrated once per year.

To ensure best performance of your gaming device, periodic upgrades of modules and firmware are requested (newer modules and firmware version must be comply according to certificates!).

note. Prior to all maintenance operations, stop the current game. See the chapter “Operator Menu” for detailed instructions how to stop the game.

86


maintenanCe oPtions

maintenance / test menu

By pressing the button “20 – Maintenance/Test menu” in the operator menu, automatic diagnostic mode of the Play Station is started.

Diagnostic process starts detection of electronic modules which are built into Play Station.Detected modules are colored in green and identified with several parameters: Program version, Factory ID, Production date, Software version, Module name, Supply voltage...

Additionally “Maintenance / Test menu” gives operator an option to test the following:• Ticket Printer test: Test the ticket printer by printing a dummy ticket.• Bill Validator test: Test the bill validator by inserting all kinds of supported bills.• Light Modules test: Test all lights and all light states configurations of the Play Station.• Touch Screen test: Test the touch sensitive display.• Door Switches test: Review the statuses on all door switches in the station.• Online Module test: Monitor the communication packets on the Online system and statistics.• Network Communication test: Monitor the TCP communication between Play Station and

Center unit.

note. In case the need for immediate troubleshooting of the Play Station, Maintenance menu could be started before the Players graphic’s interface by starting the “MultiGameGUI” program with number 4 as fourth startup parameter.For example C:\Program\MultiGameGUI.exe 1 1 1 4

87


ticket Printer test

Press the “Ticket Module” button to enter Ticket Printer test menu. In this menu you can review detailed information about built in Ticket Printer and its status.By pressing the “Test Ticket Print” button you can initiate the test. A dummy ticket will be printed and you can monitor all states of the printer in the “Status” section.

Bill Validator test

Press the “Bill Module” button to enter Bill Validator test menu. In this menu you can review detailed information about built in Bill Validator and its status.You can insert all supported (or non-supported) types of bills and tickets to see how the device accepts them. In the “Status” section you can monitor the states of the device, as well as the type of bill the device recognized.

note. None of the transactions in Ticket Printer nor Bill Validator tests will be logged. The dummy ticket in Ticket Printer test will not be valid for transactions either.

88


light modules test

Press the “Light Modules” button to enter Light Modules test menu. With this menu you can test all light states configurations and turn on all light for checking dead LEDs.

door switches test

Press the “Door Switches” button to enter Mechanical and optical door switches test menu. The status of the door switches appears automatically as you enter the menu. Green indicator means the switch is closed and red indicator means it‘s open. You can open or close all doors on the station to test the door switches.

touch screen test

Pressing the “Touch Screen” button will open a test window for the touch-sensitive display, where you can test the screen by freely drawing on an empty grid.

89


online module test

Pressing the “Online Module” button will open window, where you can monitor communication packets on the Online system. You can also monitor different types of communication statistics, which can be useful for troubleshooting communication issues with the casino Online system.

network Communication test

Pressing the “Network Communication” button will open window, where you online monitor TCP communication between Play Station and Center unit, and Connection status of the connected Play Stations.

90


touch screen test

The touch-sensitive display on the G5 Diamond Play Station is the main interface between the player and the gaming device. Due to the sensitive nature of placing bets on the table by touching the display, it is necessary to have a high-precision detection of the touch. To test the precision of the touch-sensitive display press button “18 – Touch screen settings” in the operator menu.

A Test screen menu window will appear. To begin the the test of the screen, to see if your touch-sensitive screen is properly calibrated, select the “Test screen” option. The “Exit” option will return you to the operator menu.

Pressing the “Test screen” button will open a test window for the touch-sensitive display, where you can test the screen by freely drawing on an empty grid.

91



Technical Data

92


location Qtya

(mm / inch)B

(mm / inch)C

mm / inch)d

(mm / inch)e

(mm / inch)F

(mm / inch)Unlocking direction

top door lock 1 18.8 / 0.740 30 / 1.181 28 / 1.102 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Right

add’l top door lock (optional)

1 18.8 / 0.740 18 / 0.709 16 / 0.630 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Left

Front door lock 1 18.8 / 0.740 18 / 0.709 16 / 0.630 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Right

logic door lock 1 18.8 / 0.740 18 / 0.709 16 / 0.630 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Left

Bill Validator lock 1 or 2 18.8 / 0.740 18 / 0.709 16 / 0.630 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Right

Cash Box lock 1 or 2 18.8 / 0.740 18 / 0.709 16 / 0.630 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Right

g5 electromechanical game generator

loCk dimensions

g5 diamond Play station

assembling spot Qty

a(mm / inch)

B(mm / inch)

C (mm / inch)

d(mm / inch)

e(mm / inch)

F(mm / inch)

Unlocking direction

logic door 2 18.8 / 0.740 19.05 / 0.750 / 6.9 / 0.271 5.4 / 0.212 15.8 / 0.622 Right

93


g5 diamond RoUlette teCHniCal data

G5 Diamond Roulette Electromechanical GeneratorØ/H [mm]: 1384 / 979 Ø/H [inch]: 54.49 / 38.54Weight: 380 kg / 836 lbRatings: 100-240Vac; 60–50Hz; 2.5A; Class I unit

G5 Diamond Roulette Electromechanical Generator with 55’’ PID and LED SignØ/W/H [mm]: 1384 / 2919/ 2897 Ø/W/H [inch]: 54.49 / 114.93 / 114.06Weight: 631 kg / 1391 lbRatings: 100–240Vac; 60–50Hz; Class I unit; Generator: 2.5A; PID: 6–3A; LED Sign: 3A

94


G5 PID Horizontal 32”L/W/H [mm]: 702 / 1399 / 823 L/W/H [inch]: 27.64 / 55.08 / 32.4Weight: 93 kg / 205 lbDisplay Resolution: 1360 x 768 / 1920 x 1080Ratings: 100–240Vac, 60–50Hz, 3–1.5A, Class I unit

G5 PID for Side Bets 38” Double SidedWeight: 51 kg / 112 lbDisplay Resolution: 1360 x 768 / 1920 x 1080Ratings: 100–240Vac, 60–50Hz, 3–1.5A, Class I unit

95


G5 Diamond Play StationL/W/H [mm]: 914 / 659 / 1029 L/W/H [inch]: 35.98 / 25.93 / 40.51Weight: 100 kg / 220 lbRatings: 100-240Vac; 60–50Hz; 2.5A; Class I unit

96



Settings

97


g4 settings – PaRam.ini

Program G4Settings.exe is a configuration program used for setting G5 Diamond gaming device.

Settings are stored in “.ini” files and loaded to device memory during the device startup:• Settings for Play Station are stored in Param.ini file in directory “D:\Data\”.• Settings for Game Generator (Center Unit) are stored in Center.ini file in directory “D:\Data\”.

To change settings for G5 Diamond Play Station an USB keyboard and preferably an USB mouse should be connected to the Play Station’s computer (Logic Area 3).Start configuration program G4Settings.exe from directory “C:\Programs\”.Select menu “File/Open ini file”, select file “D:\Data\Param.ini” and click “Open”.

Once configuration of the Play Station has changed, configuration file can be distributed to all Play Stations in the gaming device using “Distribute settings”.(See section “Advanced Center Unit Commands” in the “Operator Menu” chapter in this manual).

If certain Play Station should have different configuration than other Play Stations in the gaming device, we would like to prevent overriding of the certain Param.ini file with execution of the “Distribute settings” command. That can be accomplished with creation of the additional files named:• Param_[x-y].ini in directory “D:\Data\”, where [x-y] is range of ID numbers of Play Stations.

(example: Param_1-10.ini)• Param[x].ini in directory “D:\Data\”, where [x] is ID number of the certain Play Station.

(example: Param1.ini)

First the settings from Param.ini are applied. They are overridded with settings fromParam_[x-y].ini and then with settings from Param[x].ini.

note. Changes made with G4Settings.exe program must be saved to Param.ini file in order to be considered on Play Station.

note. Command “Distribute settings” must be executed on the same Play Station where one has changed Param.ini file with G4Settings.exe program.

98


multi game

Setting title Description / default valueGame1 =Game18 =

Read only! Games can only be set with Initial Values!

Game number [1] - [18] is currently enabled. Default value is False.RNG IP address: IP address + port (optional) of Center.exe (e.g. 192.168.1.1:2100) Game 1 - 18 Custom menu image Custom graphics for this game in Multigame menu. If field is left

blank, default menu image for this game is used.To enter the proper menu image name, we could copy name from the “List of available menu images” at the bottom of the screen.

Game1 enabled - Game18 enabled

Select if center can switch to this game or not.

Game 1 - 18 Hybrid Center If center switches between live and mechanical mode, multiple games must be connected to the same center with different settings, (1-Mechanical, 2-Live, 3-Virtual). Regular games have this setting set to 0.

99


Common game settings

Setting title Description / default valueMax. win amount from one game (in cents):

PT will limit stakes so that win amount can not exceed this value in cents. Any win limit setting (set in games) can not go over this one.

Reduce stake on repeat if there is not enough credits:

True-reduce stake on repeat, if there is not enough credits; False-don't place stake, if there is not enough credits. Default value is True.

On screen chip 1 (left) value: Value of on screen selectable chips in credits. Used for all games if not set in the game. Default value is 1.

On screen chip 2 value: Value of on screen selectable chips in credits. Used for all games if not set in the game. Default value is 2.



100


Setting title Description / default valueOn screen chip 5 value: Value of on screen selectable chips in credits. Used for all games if

not set in the game. Default value is 20.On screen chip 6 (right) value: Value of on screen selectable chips in credits. If this value is set to

99999, chip will display "max". Used for all games if not set in the game. Default value is 50.

On screen chip 7 (only for Spain) value:

Value of on screen selectable chips in credits. Used for all games if not set in the game. Default value is 9999.

Win amount representation on screen:

0 - don't show, 1 - amount = win + winning chips, 2 - amount = win + winning chips - stake, 3 - amount = win

Max stake limit on one board for one game (in cents):

This is a general stake limit. Any stake limit setting (set in games) can not go over this one.

Credit limit (in cents): PT will not allow cash in over this value. Wins over this value will be cashed out.

Disable money acceptance on no more bets:

If True then disable all money acceptance on "No more bets" (this will force CoinToFatalOnInhibit to False). Default value is True.

Minimum total stake (in cents): If sum of all stakes is less than this value, stakes will not be valid.Automatically hide help delay (ms)

How long does it take to automatically hide help screen. 0-disabled

Jack pot limit (in cents): If win in last game > JackPotLimit then station goes to jackpot had pay for that amount (use only with parameter CrearStakes=1!)

Roulette twin (fast switching center without game menu)

Enable fast center switching on Roulette. Default value is False.

Increment stake counters (including SAS) at no more bets:

If set to False, all win meters will be incremented at game result. If true then at no more bets. (Craps is hard coded to False) Default value is False.

Show pop up for choosing denomination:

If set to False, denomination will change one after another. If True, pop up dialog will appear. (only applicable when Multi denom is selected in InitialValues). Default value is True.

Denomination selection type: 0 - min or nearest, 1 - user selection if previous selection not possible, 2 - user selection every time game is entered, 3 - user selection when credit is added (only from 0), 4 - user selection for each game on first enter

Inactivity start time delay (s) Number of seconds before start button can be pressed; if set 0 this setting is ignored.

Min time between two games (s)

Number of seconds before start button can be pressed; if set 0 this setting is ignored.

Show stakes from other players: Show stakes from other players. Default value is False.Max undo steps (Clear last bet) Maximum number of "Clear last bet" steps Cashout menu enabled on Spanish version:

Displays cashout menu if more options are available. Default value is True.

Delay before connecting to Center (in msec):

Number of milliseconds before game will try to connect to Center. This will halt loading of the game for StationID*msec.

Separate Bet/Win/% counters for each RTP:

Special requirement to keep separate bet/win counters when theoretical RTP % is difference is > 4%. Default value is False.

Display JackPot Min Value: JackPot min value will be displayed (min value to participate in JackPot win). Default value is True.

101


Setting title Description / default valueProgressive Jackpot win will always trigger a handpay:

If set to True any progressive Jackpot win will always trigger a handpay. If set to False it depends on a Jackpot limit setting. Default value is False.

Help is allowed if stake > 0: If set to False, help screen will not be allowed if stake > 0. Default value is True.

Include side bets as part of total Max possible win calculation:

When set to True, each side bet will be part of max possible win calculation, which can lead to reduced stakes in basic game. Default value is False.

Substract Croupier Tip from Win (SAS: Total Coin out) counter:

If set to False, Win (SAS: Total Coin out) meter will not be decreased for the amount of Croupier Tip. Default value is False.

102


Path / address

Setting title Description / default valueRNG (center.exe) IP address: Default RNG-Center PC address for all games - it can be overwritten

in MultiGame section.Path to image files: Path to the root of the folder containing images (it must end with \).

Default value is “C:\Programs\Images\”Path to sound files: Path to the root of the folder containing sounds (it must end with \).

Default value is “C:\Programs\Sounds\”Special version images path: Path to the root of the folder containing images for special version

(it must end with \)

103


other settings

Setting title Description / default valueDefault language number: 01-SLO,02-GER,03-IT,04-ENG,05-FRA,06-CRO,07-YU,08-CEH,09-

BG,10-ESP,11-HUN,12-HOL,13-POL,14-RUS,15-ALB,16-FIN,17-SWE,18-CHI,19-MEX,20-POR,21-USA,22-EMPTY,23-SK,24-UKR,25-ROM,26-TUR,27-GRE,28-CAN-FR

Use languages (leading zero for languages < 10):

01-SLO,02-GER,03-IT,04-ENG,05-FRA,06-CRO,07-YU,08-CEH,09-BG,10-ESP,11-HUN,12-HOL,13-POL,14-RUS,15-ALB,16-FIN,17-SWE,18-CHI,19-MEX,20-POR,21-USA,22-EMPTY,23-SK,24-UKR,25-ROM,26-TUR,27-GRE,28-CAN-FR

Master menu language number: 0-default, 1-ENG, 2-ITA, 3-ESP

Sound volume (0 to 100): All games with credit to history (also with stake=0):

This will write every game data to history database. Default value is False.

104


Setting title Description / default valueEnable shut down machine option in Shut down screen:

Enable/disable “Shut down machine” button in “Shutdown options” menu. Default value is True.

Allow player to stick repeat button:

With this function turned on, player can engage Auto repeat function so the bets are repeated automatically after each game end. Default value is True.

Allow player to start RNG (cylinder) with start button:

Default value is False.

Use confirmation box for sticking repeat button:

When player tries to stick repeat button, additional confirmation box is displayed.

Time for displaying last pay out in sec:

If 0 pay out amount will not disappear.

Clear all stakes after calculation (no winning chips):

When False, winning chips will stay on the mat for 3 seconds in the next game and will be automatically removed if no other action is taken in the mean time. Default value is False.

By pressing payout machine goes to hand pay:

If there is no coin unit or ticket printer or player cards enabled machine will go to hand pay. Default value is False.

If in hand pay by pressing payout again machine cancels hand pay:


Support residual credit: Default value is False.Betting Style: 1: we only allow to bet multiples of OddsAgainst; 2: we allow all

bets, calculation will only "Floor" values less than one cent; 3: we allow all bets, but win calculation will "Floor" the result to credit value so the player will lose money if bets unwisely.

Hand pay with residual credit True - Hand pay will be done with residual credit; False - Hand pay will be done only for credit amount without residual credit. Default value is True.

Error sound on system error: Station makes sound on System error. Default value is False.Error sound on door open: Station makes sound when main door is opened. Default value is

False.Play center announcements on station:


Announcements volume (0-100) 25 - 100 Show last money transactions in info box

Is last pay in and pay out shown in red info box on the screen. Default value is True.

Center synchronization type: 0 - synchronization disabled; 1 - one center starts after another (ex. Spain twin roulette)

Center synchronization delay: How long after result other center goes to 'Last bets' - in seconds.Show power and door status in info box

Are Power reset and Door labels shown in red info box on the screen. Default value is True.

Include call stack logging: 0 - Disabled, 1 - Serious errors are saved to ExceptionLog.txt, 2 - Call stack is stored in log*.dat file, 3 - both. Default value is 3.

Use station language for speech instead of center defined language

0 - use language from center; 1 - use station language for announcements

105


Setting title Description / default valueUse only default language for speech:

If true, station always uses default language for speech - it disables speech language switching Default value is False.

Date format: For delimiter use "." or "/" (including brackets) Decimal point separator: Decimal point separator (, or .) Thousand separator: Thousand separator (, or .) Display chips in currency: Default value is False.User can switch between chips and currency display:

0 - no switch possible, 1 - toggle is performed by clicking on game meters in top left of the screen, 2 - toggle button appears in settings menu, 3 - both previous options. After screensaver the value goes to DisplayChipsInCurrency value. Default value is 0.

Decimal point separator Defines the separator for decimal point.Thousand separator Defines the separator for thousands.On screen time format: For delimiter use "." or "/" (including brackets) On screen clock visible: If true, clock is displayed in bottom left corner. Default value is False.Reserve station delay (in sec - if 0 - disabled):

Player can reserve the station for n seconds set here. If set to 0 this option is not available.

Player can cancel reserve by pressing anywhere:

Default value is True.

When reserve timeout expires reserve is canceled:

If set to False, station will stay in reserved mode, but it can be canceled by the player. Default value is True.

When the door is closed door open message is cleared:

When the door is closed door open message is cleared automatically without the master RFID card. Default value is False.

Main module switch 6 is used for (read hint):

G4 Main module switch 6 is used: 0-not used, 1-As remote hand pay (Holland), 2-As battery backup stacker switch.

Minimum on screen meters opacity:

If set to less than 100, a scroller is displayed which can make meters less visible. If it is 100, meters are fully visible all the time. Default value is 100.

Display special regulator info and help screen:

If set, common\X.png image is displayed in bottom right corner of the program. Help file 'common\lang_Y\Xhelp.png' is displayed in help screen on click. If empty, regulator info is disabled.

How to switch between games: 'Change game' button behavior: 0 - Game closes and selection menu appears, 1 - available games are displayed over existing game, 2 - pulldown for selecting another game is displayed.Default value is 0.

Voluntary tip enabled: If enabled, player can tip the attendant by printing a non playable ticket. Default value is False.

Automatic reconnect: If enabled, game will automatically try to reconnect to Center on every 10 second if no bets are on the table. Default value is False.

Island ID Interblock Island IDGames Played Bonus Name: Games Played Bonus name that will be displayed on screen and in

logs. Default value is “Games Played Bonus”.

106


Hardware

Setting title Description / default valueCoin acceptor enabled: Enables coin acceptor module. Default value is False.Bill acceptor enabled: Enables bill acceptor module. Default value is False.

Roulette module enabled: Enables roulette module. Not used on G4 (only G3, G2)! Default value is False.

On line type : (0-disable, 1-CrystalWeb, 2-VAN, 3-SAS, 4-XProt., 5-AAMS, 6-BACTA) Touch screen enabled: Enables touch screen program mode. If set to False then keyboard

mode. Default value is True.Ticket printer (I2C module) enabled:

Enables ticket printer acceptor module. Default value is False.

Keyboard led module (Spain and Italian roulette only):

Enables keyboard led module. Also G4 keyboard must be enabled! Default value is False.

Led circle module (G4 only): Enables led circle module. Default value is False.

107


Setting title Description / default valueAmbient light Led module (G4 only):

Enables ambient light module. Default value is False.

Interblock card reader module (G4 only):

Enables led reader (RFID reader). Default value is False.

Led arc module (G4 only): Enables led arc module. This module is used as tower light status indicator.

G4 Keyboard Module enabled: Enables G4 keyboard module Euroblock Keyboard/touch Module enabled:

Enables Euroblock keyboard/touch module. Default value is False.

BarTop module enabled: Enables BarTop module (with external buttons used for bar top). Default value is False.

G5 led power meter enabled: Enables G5 led power meter. Default value is False.G5 card reader enabled: Enables G5 card reader (mifare desfire). Default value is False.Enable beeper on keyboard PCB: When RFID card arrives, hardware beeper will make sound. Default

value is True.Enable lights on external buttons:

It can be enabled only on keyboard version. Default value is False.

Auto repeat enabled for keyboard buttons:

When the keyboard button is pressed it will start to repeat. It can be enabled only on keyboard version. Default value is True.

Auto repeat enabled for external buttons:

When the external button is pressed it will start to repeat. It can be enabled only on keyboard version. Default value is False.

Sound enabled for keyboard buttons:

When keyboard version is used hardware beeper will make sound for each button press. Default value is False.

GAT serial port number: GAT RS232 port nr., 0 - disabled

108


tower lights

Setting title Description / default valueFunction type of lights (0-disabled, 1-error states, 2-stages):

Led arc module will display: if set to 1 - error stages like (door open, refill) , if set to 2 - stages of the game like red light for no more bets.

Predefined configuration (0-disabled, -1 - custom configuration):

1 - custom config (settings red, blue, green below), 1-default, 2-Holland, 3-Slovenian, 4-USA, 5-Belgian, 6-IGT, 7-Canada_Ontario.

Slow flash speed (5 msec resolution):

Timing for slow flashing speed, if "Slow flash" is selected in custom configuration below. Default value is 100.

Medium flash speed (5 msec resolution):

Timing for medium flashing speed, if "Medium flash" is selected in custom configuration below. Default value is 50.

Fast flash speed (5 msec resolution):

Timing for fast flashing speed, if "Fast flash" is selected in custom configuration below. Default value is 25.

Error blinking speed: Default value is 100.

109


Setting title Description / default valueNumber of segments on led arc module:

If set to 2, than light 1 and 2 definitions and if set to 1 than light 1 definitions are used.

General brightness of all segments(0-63). Used for Led arc and G5 power meter.

Default value is 20.

Disable led modules screensaver:


First light (1) shows machine denomination:

Colors for denominations are hard coded. Other light are white. Default value is False.

110


touch screen

Setting title Description / default valuePath to touch screen calibration driver:

Touch screen calibration program (full path). Default value is “C:\Program Files\UPDD\TBCALIB.EXE”.

Enable staking while dragging - fast bet (the same like keyboard):

Stake while dragging or fast bet is enabled after the program startup. Fast bet is an option where the player can move the finger across the staking field and one chip will drop on each staking position. Default value is False.

Enable user change of dragging mode (show Fast bet button)

Player can change modes "fast bets" or "normal bets" with the button. Fast bet is an option where the player can move the finger across the staking field and one chip will drop on each staking position. Default value is False.

Enable RAW Touch Input mode Detecting raw touch events directly from each touch controller enables use of two touch monitors at the same time. Default value is False.

111


ticket Printer

Setting title Description / default valueTicket printer type (0 - Ithaca, 1-Future logic, 2-Ithaca epic):Currency name printed on ticket (DOLLAR):

Default value is DOLLAR.

Name for cent printed on ticket (CENT):

Default value is CENT.

Casino name printed on ticket: Casino name can be overwritten with value sent by SAS poll 7C or 7D Casino address printed on ticket: Casino address can be overwritten with value sent by SAS poll 7C or

7D Casino adress1 printed on ticket: Casino address1 can be overwritten with value sent by SAS poll 7C or

7D Ticket void after n days printed on ticket:

Cashable ticket voids after number of days set here. This value can be overwritten by SAS poll 7C or 7D.

112


Setting title Description / default valueRestricted ticket void after n days printed on ticket:

Restricted ticket voids after number of days set here. This value can be overwritten by SAS poll 7C or 7D or by last transaction of restricted credits.

Maximum cashout value for cashout ticket (in cents):

Maximum amount in cents which can be cashed out with ticket (hand pay receipt can be higher). Above this value the machine will go to hand pay.

Host ID printed on ticket: If GMID or Machine number is not set in InitalValues, than this ID will be printed on the ticket.

Use nested macros with Ithaca epic:

Nested macros shall be used for Chinese layout of the ticket if Ithaca epic printer is used. Default value is False.

Ticket credit limit checked at redemption (in cents):

If current credit+ ticket amount > setting then reject. It can be set <= than Common game settings->Credit limit

No void after text printed on ticket:

If set to True, than "Ticket voids after..." text will not be printed on the ticket (Canada). Default value is False.

Print casino address1 and address2 on the ticket

If set to False Machine ID and floor location will be printed on the ticket. Default value is True.

Cashable ticket title: Cashable ticket title (normally “CASHOUT TICKET” or “CASHOUT VOUCHER”). Default value is CASHOUT TICKET.

Disable paper low sensor: Paper low warning will not be reported. Default value is False.Currency sign used to send to the printer:

Printer firmware can convert $ to € or ~158 to € on GEN2 or chr(213) to € or chr(164) to € on Ithaca , so we can use any character here which is sent.

Use centered barcode ticket for jackpot receipt:

Use centered barcode ticket for jackpot receipt, so that the ticket can be redeemed at the machine. Default value is False.

Ticket register period after printed in hours:

Nubmer of hours after Ferrari Tournament ticket was won till registration. Default value is 24.

113


Bill acceptor

Setting title Description / default valueBill type 1 - GPT, 2 - GBA, 3 - smile, 4 - JCM, 5 - MEI, 6 - ARDAC:

Here we set type of bill acceptor.

Enable bill type 1-15: Enables bill note programmed in bill acceptor FW on position 1-15. If the value for this position is not set in Initial values it will not be enabled. Default value is False.

Bill insertion in only one orientation (GPT,JCM):

If set to True, than bill note can be inserted only in one orientation. Default value is False.

Bill insertion in only one direction (GPT,JCM):

If set to True, than bill note can be inserted only in one direction. Default value is False.

Use - check I2C bill module stacker switch for remove/install detection.:

Optional stacker micro switch is installed and connected to bill module to detect stacker removed/installed. Default value is False.

114


Setting title Description / default valueEnable use of bill acceptor only for exchange to coins:

If set to True and bill acceptor and hopper is installed, inserted bill, will be cashed out in coins and not credited. Default value is False.

Bill credit limit checked at insertion (in cents):

If current credit+ bill value > setting then reject. It can be set <= than Common game settings->Credit limit

Automatically clear stacker counters when stacker is installed (no dialog):


Enable insertion of bar code (ticket):

Enables accepting of bar code tickets. We have to set also validation system (SAS). Default value is False.

WBA command mode supported (False for EBA, ARDAC):

Set to False for EBA and ARDAC! Default value is False.

Enable GPT bill security level 2: Default value is False.High GPT bill security level mask:

GPT bill stacker required: GPT bill acceptor can run without the stacker. Default value is True.

115


Coin acceptor

Setting title Description / default valueCC talk communication with coin validator:

CC-talk communication with coin acceptor is used. Default value is True.

CC talk communication with hopper:

CC-talk communication with hopper is used. Default value is True.

Enable coin type 1-6: Enables coin programmed in coin acceptor FW on position 1-6. If the value for this position is not set in Initial values it will not be enabled. Default value is False.

Enable hopper number 1: Enables hopper 1. If at least one of the coins is not routed to this hopper it will not be enabled! Default value is False.

Enable hopper number 2: Enables hopper 2. If at least one of the coins is not routed to this hopper it will not be enabled! Default value is False.

116


Setting title Description / default valueCoin type 1-6 routed to hopper number:

Coin 1-6 will be routed to hopper nr. (1 or 2) defined here. This defines only the value of the hopper. Mechanical routing (sorter settings) must be defined separate.

Max. number of coins in hopper 1:

Maximum number of coins in the hopper 1, before they are routed to cash box. Default value is 200.

Max. number of coins in hopper 2:

Maximum number of coins in the hopper 2, before they are routed to cash box. Default value is 200.

Min. number of coins in all hoppers:

Minimum number of coins for any hopper, before refill lockup status will be generated.

Enable software (counting) hopper level control:

Hopper level Min/max is controled by software counting of the coins. If false than only high and low sensor is used. Default value is True.

Hopper cash out limit (in cents): Maximum amount in cents which can be cashed out with hoppers. Above this value the machine will go to hand pay.

Hopper initial Value: Number of coins which is always inserted after hopper clearance. Hand pay on non-payable amount:

0-No Hand pay on non-payable amount; 1-Hand pay on second CashOut pressed; 2-Hand pay on first CashOut pressed.

Go to hand pay on hopper error: If hopper runs empty or has an error during pay out go to hand pay. Default value is True.

Hand pay only if hopper empty: If hopper is in error, hand pay does not occur. Default value is True.Produce fatal error when coin is inhibited

This setting will always be false if DisableAcceptance (Common game settings) is True.

Coin credit limit checked at insertion (in cents):

If current credit+ coin value > setting then reject. It can be set <= than Common game settings->Credit limit

Primary sorter path (1,2,3): This sorter path is used to route all coins to cash box. Sorter path coin 1-6 (1,2,3): This sorter path is used to route coin 1-6 to hopper. Routing mask (binary value) which should be set to route coin nr. 1-6

to hopper. This value is ignored if it is set in InitialValues (the same setting)

Routing mask (binary value) which should be set to route coin nr. 1-6 to cash box. This value is ignored if it is set in InitialValues (the same setting)

Allow direct refill into hopper refill screen:

Coins can be refilled directly to the hopper and nr. of coins refilled can be manually written to the refill scrren. Default value is True.

Enable gamble of rest of credit if coin value in main hopper > credit:

Fair gamble is performed if the cashout amount is not dividable by the hopper coin value. Default value is False.

Number of coins for hopper test: Number of coins which can be cashed out by the test hopper button in the master menu refill screen.

Inhibits validator with disabling all coins (if inhibit all doesn't work):

For coin acceptors where we can not use inhibit all line, we inhibit all by disabling all 6 coins. Default value is False.

Hopper pay out amount if hand pay (0-no pay out - in cents):

If > 0 then pay out that amount, if < 0 then pay out to rounded value (for example: PayOutIfHandPay=- 10 and amount to pay out is 123 (hopper will pay out 3))

117


Setting title Description / default valueHopper pay out - number of coins in one frame (1-255):

Hopper cashout is performed in frames of (n) coins, set here.

Hopper pay out - time between two frames (msec)

Time between hopper cashout frames.

Show Total cashable (instead of just Total)

Show Total cashable amount of players money (instead of just Total). Default value is False.

118


Cash Box (Player Cards or ticket Validation)

Setting title Description / default valueEnable player cards (connection to cash desk):


Enable cash box ticket validation (connection to cash desk):


Name and path for to cash desk database (Elcards.gdb file):Print receipt for hand pay or jackpot win:


Ticket redemption enabled: Default value is False.

119


online

Setting title Description / default valueSerial port number It only has effect on AAMS, BACTA and GAT Baud Rate It only has effect on BACTA (0-300,1-600,2-1200,3-2400,4-4800,5-

9600,6-19200,7-38400,8-57600,9-115200,10-230400,11-460800,12-921600)

Lock station if online error In the case of communication problem with online system (loop down) PT will lockup. With SAS always set to False.

Enable remote credit add and clear from OnLine

If enabled, it allows for credit increment and redemption via VAN and X-protocol online systems. Default value is False.

Supported arcade management flags for VAN:


Supported options flags for VAN: Default value is 81.Manufacturer code for VAN: Default value is IBL.TK code for VAN: Default value is K.

120


Setting title Description / default valueTK number for VAN: Default value is 5555.Protocol library revision number: Default value is 70.Handle jackpot value VAN: If enabled and linked jackpot enabled in supported options then

handle jackpot value (Hanpay for jack pot win value, send to counters if defined). Default value is False.

Min. stake to participate in LJP in cents(6A is not sent):

Value is in cents! Default value is 1.

Max. cashless credit limit checked at redemtion( in cents):


Cashless payout limit: (in cents): Default value is 99999999IBOnline enabled: Set to True to enable IBOnline. Default value is False.Periodically send accounting data:

Accounting data are sent after every game end and periodically if data are changed. Default value is False.

Periodically send Sas data: Sas data are sent after every game end and periodically if data are changed. Default value is False.

Security Check Seed: Security check seed has to be entered (8 char) to enable BCSP.

121


online - sas

Setting title Description / default valueMachine serial number: Machine serial number sent to SAS. Default value is “ELE/1”.SAS protocol version (4 - 4.05, 5 - 5.02, 6 - 6.01, 62 - 6.02):

SAS protocol version

Bill country code (37-USA): Bill country code for bills sent to SAS Send current credits and restricted credits in cents (meters 0C,1B):

If set to True, SAS meters 0C and 1B are sent in cents even if SAS accounting denomination in InitialValues is set to more than 1 cent

Communication address (use if all stations have the same address):

SAS communication address on port1. Use only this setting if address is the same on all stations. 0 - port is disabled.

Communication address for station nr. 1-12:

SAS communication address on port1 for station nr.(n). This setting overwrites the common setting above. 0 - port is disabled.

122


Setting title Description / default valueGeneral control on port: Used when both ports are used. The one where only ticketing

system (Easypay) is connected should be set to False. Ticket validation type 1- standard validation, 2-system, 3-sec. enhanced:

Ticket validation type set on Port1. Only 2 and 3 can be set. 0- disabled

Support ticket redemption: Enable ticket redemption on port1 Support AFT (advanced founds transfer):

AFT support enabled on port1.

Enable Jackpot-Hand pay reset to credit option:

Hand pay or Jackpot reset to credit enabled on port1 (SAS poll 94).

Multi-denominaion support enabled:

Multi denomination support enabled (response to poll A0). Default value is False.

Report all game results even if the game is not played (SIQ):

Reel results are reported to SAS even if stake=0 (reel n has stopped exception 88)

Write transactions to OnLine log:

Enabled additional logging of SAS transaction states

Length of extended meters in BDC

Defines the length of extended meters in Binary Decimal Counter (BDC).

Type of CRC16 calculation (poll 21):

1-on both exe files,2-on MultigamGUI.exe,3-on SHA all executables,4-on SHA of all CF drives

Type of overall theoretical payback % calculation:

1-on all games enabled in InitialValues, 2-On all different games enabled in InitialValues.

Only general control port is used for LOCK/UNLOCK (polls 01,02):

If set to True, then only general control port will handle 01,02 polls. If False then polls received from both ports will be handled. Default value is False.

Support 40ms pooling rate: Enabled 40 msec polling rate on port1 Enabled 40 msec polling rate on port2.Support legacy bonus awards: Legacy bonusing enabled on port1 . Legacy bonusing enabled on port2.Legacy multiplied bonus win supported:

Multiplied win bonus Enabled. To enable it, also "Legacy bonus awards" setting must be enabled on port1 or port2.

Enable/Disable bill acceptor supported (poll06,07):

Enabled option to enable/disable bill acceptor using SAS polls 06,07.

TITO hand pay validation: Hand pay and jackpot hand pay is validated using TITO (exception 3E...). The system can overwrite this setting with poll 7B.

Print receipts: Hand pay and Jackpot receipts are printed. TITO hand pay validation if no receipt:

Hand pay and jackpot hand pay are validated if "Print receipts" is set to false and "TITO hand pay validation" to True.

No receipt print on printer error: When hand pay or Jackpot hand pay is canceled and printer cannot print a receipt, it will not be printed.

Support cashable promotional credits:

Cashable promotional credits can be accepted by ticket or AFT.

Support restricted promotional credits:

Restricted promotional credits can be accepted by ticket or AFT.

123


Setting title Description / default valuePrint restricted promotional ticket:

Enables cashout (with ticket) of restricted promotional credits.

Printer available for transaction receipts:

All AFT transactions to ticket enabled.

Transfer to host of less than full available amount allowed:

AFT status (bit 1) - less than full amount transfers allowed.

Custom ticket data supported: AFT status (bit 2) - Custom ticket data supported. In house transfers enabled: AFT status (bit 4) - In house transfers enabled. Bonus transfers enabled: AFT status (bit 5) - Bonus transfers enabled. Debit transfers enabled: AFT status (bit 6) - Debit transfers enabled. Cashout to host enabled: General setting to enable/disable AFT transactions to host. The

setting can be overwritten by SAS poll 72 (transfer flags bit 1). Jackpot win amount to host enabled:

Enables AFT Jackpot win amount transfers to host.

Credit excess win amount to host enabled:

Enables AFT win amount over credit limit transfers to host.

Host cashout mode currently soft (else hard):

If set to True soft cashout mode is set. The setting can be overwritten by SAS poll 72 (transfer flags bit 2).

If soft then use AFT for cashout: If PT is in soft mode, and this setting is set to True, then AFT will be used for cashout. If it is set to False, then other cashout method will be used (ticket).

Single transfer limit (in cents): Max amount of any AFT transaction. Credit limit checked at transfers to GM (in cents):

If current credit+ AFT transaction amount > setting then reject. It can be set <= than Common game settings->Credit limit

Lock after transfer supported (6.02)

Enable support of lock after AFT transfer (introduced in SAS 6.02).

124


monitor settings

Setting title Description / default valueScreen resolution: 0 - 1280x1024, 1 - 1280x800, 2 - 1920x1080, 3 - 1920x1320 , 4 -

1600x770, 5 - 1366x768; Default value is 0.Monitor type: 0 - No software control, 1-JustFlat, 2-DataModul; Default value is 0.Serial port number: Serial port nr. where monitor controller is connected.

Source 1 - 10: Leading zero required!; 01 - VGA, 02 - DVI, 03 - VIDEO, 04 - SVIDEO, 05XX - TUNER and CHANNEL nr. (i.e. 0503-Tuner ch. 3)

Name: Source name Start screen saver after n seconds:


Type of screensaver (0-images, 1-selected source):

Default value is 0.

125


Setting title Description / default valueGo to information mode mode after motion detected:


Screensaver images folder Default value is “images\ScreenSaver\”.Image sequence selection 0-blank screen, 1-images displayed one after another, 2-images

displayed in random order ; Default value is 1.Image effect 0-still image, 1-zoom in effect, 2-zoom in-out effect ; Default value

is 1.Image visibility duration Time between changing images in screen saver (in seconds). Default

value is 8.Source for screensaver: If “Type of screensaver=1” then write one of the sources on the left

(i.e.: 0529)Pip To Fullscreen Enabled Default value is True.Pip volume adjust Enabled Default value is False.Game 1: - Game 18: Leading zero required!; Write sources from above in one line (i.e.:

0103051202) Always ON If True, PIP position is read from box on the right, otherwise PIP

position is defined by the design. Default value is False. PIP position Position for PIP separated by a comma: 'Left,Top,Right,Bottom' Hide delay: Delay (in ms) to hide PIP after result (if Always ON is set to False).


126


denomination timings

Setting title Description / default valueMode 1 Default value is 0;0;0;0;Mode 2 Default value is 0;0;0;0;Mode 3 Default value is 0;0;0;0;Mode 4 Default value is 0;0;0;0;Mode 5 Default value is 0;0;0;0;Mode 6 Default value is 0;0;0;0;Mode 7 Default value is 0;0;0;0;Mode 8 Default value is 0;0;0;0;

127


glm

Setting title Description / default valuePath to GLM Video files: Path to the root of the folder containing GLM Video (it must end

with \). Default value is “C:\GLM_Video\”.Path to videoplay.exe: Path to the folder containing videoplay.exe (it must end with \).

Default value is “C:\Windows\System32\”.

128

G5 Diamond Gaming Device Settings

Roulette 0/00 game settings

Setting title Description / default valueDenomination value in cents: Default value is 100.Stake limit Simple bets (x 2) Max. and min. stake in one game. Default value is 180. Maximum

value is 32639.Stake limit Columns/Dozens (x 3)

Max. and min. stake in one game. Default value is 120. Maximum value is 32639.

Stake limit Six Line (x 6) Max. and min. stake in one game. Default value is 60. Maximum value is 32639.

Stake limit First five (x 7) *00 Max. and min. stake in one game. Default value is 60. Maximum value is 32639.

Stake limit Corner (x 9) Max. and min. stake in one game. Default value is 40. Maximum value is 32639.

Stake limit Street (x 12) Max. and min. stake in one game. Default value is 30. Maximum value is 32639.

129


Setting title Description / default valueStake limit Split (x 18) Max. and min. stake in one game. Default value is 20. Maximum

value is 32639.Stake limit Straight up (x 36) Max. and min. stake in one game. Default value is 10. Maximum

value is 32639.Stake Split Column/Dozen (x 1.5) Max. and min. stake in one game. Default value is 240. Maximum

value is 32639.Stake limit Touchdown: Max. and min. stake in one game. Default value is 10. Maximum

value is 32639.Stake limit Goal: Max. and min. stake in one game. Default value is 240. Maximum

value is 32639.Stake limit Poker Red/Black Flush:

Max. and min. stake in one game. Default value is 10. Maximum value is 32639.

Stake limit Poker Straight: Max. and min. stake in one game. Default value is 10. Maximum value is 32639.

Stake limit Bikini: Max. and min. stake in one game. Default value is 600. Maximum value is 32639.

Max stake limit on board (in cents)

Max. total stake in one game in cents. This setting overwrites the one in common game settings. Default value is 100,000.

Min total stake (in cents): Min. total stake in one game in cents. This setting overwrites the one in common game settings.

Max. win amount (in cents): PT will limit stakes so that win amount cannot exceed this value in cents. This setting overwrites the one in common game settings. Default value is 1,000,000.

On screen chip 1 (left) value: Value of on screen selectable chips in credits. If not set, values from Common game settings are used.

On screen chip 2 value: Value of on screen selectable chips in credits. If not set, values from Common game settings are used.




On screen chip 6 (right) value: Value of on screen selectable chips in credits. If this value is set to 65536, chip will display “max”. If not set, values from Common game settings are used.

On screen chip 7 (eraser) value: Value of on screen selectable chips in credits. If not set, values from Common game settings are used.

Center or local color glow: 0 - no center color glow, 1 - center color glow is taken from center, 2 - center color glow is overridden from settings below.

Screen Color: Screen Color: red, green and black values.Show possible win for individual result:

If True, an indicator representing win value on individual result is displayed. Default setting is True.

Display button to show/hide possible win:

If True, a button will appear for enabling/disabling display of possible win amount for individual result. Default value is True.

130


Setting title Description / default valueSplit bet enabled between bets 1st, 2nd, 3rd 12 and 2to1 line bets:

Split bet enabled between bets 1st, 2nd, 3rd 12 and 2to1 line bets (Odds 2:3). Default value is False.

Number of neighbours set when first press:

First press on Neighbours bet will set selected number of bets on each side of selected position. So if the number is set to 2, there will be 4 new chips placed on table. On every subsequent bet only one additional chip will be set on each side. Default value is 2.

Max number of neighbours until bets will be increased:

Max number of bets added to original bet (half of this number on each side) until all bets will start increasing. This number should be even and higher than "Number of neighbours set when first press". Default value is 10.

Orientation of numbers on bet field:

0 - numbers vertical, 1 - numbers horizontal, 2 - numbers vertical, toggle for selecting orientation in settings menu , 3 - numbers horizontal, toggle for changing orientation is displayed in settings menu. Default value is 0.

Side bet allowed even if base bet is zero:

If False, side bet bet is not allowed if no base bet is placed. Default setting is True.

Roulette special bets enabled: 0 - Special bets are enabled, 1 - Special bets are enabled, but not shown by default when entering the game, 2 - Special bets are not available.

Golden Chip Only on Straight False: Straight, Split and Corner bets are allowed; True: Only Straight numbers are allowed. Default value is False.

Bikini bet - player can bet only on one color:


131


g4 settings – CenteR.ini

Program G4Settings.exe is a configuration program used for setting G5 Diamond gaming device.

Settings are stored in “.ini” files and loaded to device memory during the device startup:• Settings for Play Station are stored in Param.ini file in directory “D:\Data\”.• Settings for Game Generator (Center Unit) are stored in Center.ini file in directory “D:\Data\”.

To change settings for G5 Diamond Generator (Center unit) an USB keyboard and preferably an USB mouse should be connected to the center’s computer.Start configuration program G4Settings.exe from directory “C:\Programs\”.Select menu “File/Open ini file”, select file “D:\Data\Center.ini” and click “Open”.

note. Changes made with G4Settings.exe program must be saved to Center.ini file in order to be considered on center unit.

132


Common settings

Setting title Description / default valueRoulette 0 machine: Center program will run in single zero roulette mode. Default value

is False.Roulette 00 machine: Center program will run in double zero roulette mode. Default value

is True.Dice machine: Center program will run in dice (Sic Bo) mode. Default value is False.Craps: Center program will run in dice (Craps- 2 dice) mode. Default value is

False.Horse race: Center program will run in horse race mode. Default value is False.Baccarat: Center program will run in baccarat mode. Default value is False.BlackJack Center program will run in black jack mode. Default value is False.Keno Center program will run in Keno mode. Default value is False.FSC Center program will run in dice (FSC) mode. Default value is False.

133


Setting title Description / default valueBig 6 Center program will run in Big 6 mode. Default value is False.Pop’N Poker Center program will run in Pop’N Poker mode. Default value is False.Multihand Blackjack: Center program will run in Multihand Blackjack mode. Default value

is False.Program position on screen left: Program position on screen top: Default value is 2.Sound announcements enabled: Program will play game stake announcements. Default value is

False.Path for wav files (+game name added automaticaly):

Default value is “C:\Wav\”.

Path for image files: Used for manual roulette cylinder croupier interface. Default value is “Images\Center\”.

Speech voice: 0-default, 1-female, 2-male Machine ID used for reports and GSM:

Number of stations connected to center program (RNG):

Default value is 8.

Center starts if no players on the machine:


Sound stops if no players on the machine:


Sound volume (0 to -100): Center program restarts or shutes down machine:

Used if center program is the only program on the computer - normally play station program nr.1 shutes down the machine. Default value is False.

Game time in seconds: Time available for placing bets on the table. Default value is 60.Game time tolerance in seconds: Game time variates GameTime+/- GameTimeTolerance Game time starts from detection (not from one start to another):

True - Game timer starts on final result; False - Game timer starts immediately after it runs down to 0. Default value is False.

Stations which form group with this Center:

When "Shutdown/Restart local machine" is pressed in master menu, only these stations will get the message. Separate stations with semicolon and use "-" to define set (i.e. 1;5;22-33;121;). Leave blank to select all stations connected.

Stations which will send bet info to this Center:

List of playstations to send detailed bet info to center. Separate stations with semicolon and use "-" to define set (i.e. 1;5;22-33;121;). Leave blank to disable sending bet info on playstations.

Stations which will receive bet info from this Center:

List of playstations to receive detailed bet info from center. Separate stations with semicolon and use "-" to define set (i.e. 1;5;22-33;121;). Leave blank to disable receiving bet info on playstations.

Include call stack logging: 0 - Disabled, 1 - Serious errors are saved to ExceptionLog.txt, 2 - Call stack is stored in log*.dat file, 3 - both; Default value is 3.

Hurry up time - time from start of center to no more bets:

i.e. in Roulette this time starts when the ball start running. Default value is 12.

134


Setting title Description / default valueWriting to center game log enabled (RNG results):

Center will not write RNG results to log file. Default value is False.

Allow incoming accounting data or requests

Center will not request accounting data and will ignore any accounting requests made from stations when set to False. Default value is False.

Request for accounting data after game end:

If True center sends command at connect to request accounting data after game end.

Show stations in croupier interface:

When manual RNG is enabled, stations are graphically displayed in croupier interface. Default value is True.

Go to bets please on game cancel (no Forced Reset):

For Roulette: When set to True, game will go to bets please on “Game cancelled” event, otherwise it restarts the cycle without leaving “No more bets”. For Other games: when set to True, if game is canceled stakes will be returned with no “Forced Reset”

JackPot enabled: If progressive jackpot is enabled in InitialValues we can disable it here, but we can not enable it if it is not set in InitialValues. Default value is True.

Write Jackpot hits to scv database:

If progressive jackpot is enabled all hits are written to \LOG\Jacpot.scv file (for Germany). Default value is False.

Golden Chip Max Player Selection Time:

Defines the maximum time for Golden Chip selection attraction on Playstation. Recomended setting = 11

Remote Control Socket Port: 0 - No Remote Control; Enabling Remote Control disables auto start of center.

Delay for activating start button:

Delay after ‘Bets please’ for center to activate the start RNG button on playstations. If 0, start button is allways enabled, if -1 start button is always disabled.

Center must wait for Start button:

If True, center will not start unless one of the players or attendant will press 'Start RNG' button. Default value is False.

Use master button to start center:

If True, door down switch can be used as a trigger for starting the RNG (If center must wait for start button). This disables error reporting on door down. Default value is False.

Socket port (only when 2 same centers are on one computer)

Port on which Center communicates with game. If 0 then default for current game is taken; when changing this, be sure to change param.ini accordingly.

Display game timer: 0 - Game timer is displayed on Playstation, 1 - Game timer is displayed, ‘LIVE’ is displayed around Start button on Playstation, 2 - No timer is displayed, ‘LIVE’ is displayed around Start button on Playstation, 3 - No timer is displayed

Start RNG if PID is not present: 0-RNG will always start; 1-RNG will start if any PID is present; 2-RNG will start only if Hologram PID is present

Send Result(s) to Playstations (and PIDs) with delay (in ms):

Nr. of miliseconds of delay after Result is sent to Playstations and PIDs (non-hologram only). Result will be sent right away to hologram PID.

Hybrid Mode 0-No Hybrid Mode; 1-Mechanical and Live ModeWhen Center is running, disable other games (same Group ID):

True: When center is running (or logged in), Multigame disables all other games in the same Group ID if defined; False: normal operation

135


Setting title Description / default valueGroup ID: 0-No Group defined; 1-255 Group ID; Usage: for letting PlayStation

know which centers form a groupClear game history after Table Close event:

True: History of games will be cleared after Table Close event and send to all Playstations and PIDs. Default value is False.

136


Hardware

Setting title Description / default valueLed display connected to PLC used:


4 lights PLC led display version: If False - led display connected to PLC with 2 lights (we get yellow light with turning on green and red)

Use lights to show game stage (red, yellow, green):


Converter connected on USB: Default value is False.I2C converter module serial port nr.:

Serial port for converter module.

Enable I2C power supply module:


Enable I2C counter module connected to center:


137


Setting title Description / default valueEnable I2C led display module: Default value is False.Enable I2C GSM module: Default value is False.Enable I2C EPROM security module (Hungary):


Enable I2C online RS232 port (CMI fun protocol)


Enable Moving head modul: Using Moving head module. Default value is False.Enable alarm connected to power supply module:

Alarm horn, which will sound alarm when center dome or logic door is open, can be connected to supply module and enabled here. Default value is False.

Supply temperature sensor enabled:

Enables supply module temperature checking. Default value is False.

Critical temperature (oC): Temperature where we generate high temperature warning. Default value is 60.

Fan on temperature (oC): Cooling fan switch on temperature. Default value is 50.Fan off temperature (oC): Cooling fan switch off temperature. Default value is 45.PID enabled: Enables PID information display. Serial port or TCP communication

must be also set on “PID display” tab. Default value is False.

138


online

Setting title Description / default valueEnable online type 5-Bonver (Czech), 6-ElekOnline:

Online types from 1-4 are obsolete. Select Bonver or ElekOnline

IBOnline enabled Set to True to enable IBOnline. Default value is False.Serial port nr. on PC used for online connection:Enable writing of all data to files if online is temporarily disabled:


Currency for bill data sent to Ensico online:

Default value is SIT.

Lock machine if online is disabled - for Ensico online:


Divider to get currency value from credit:

Credit / OnLineCreditValue = currency value) used for bill accepted data. Default value is 1.

139


Setting title Description / default valueMachine ID for Ensico and iNIT SLOTS (Waiss) online:

Default value is 1.

Destination (online board) ID for Ensico online:

File name to store unsent data if online is disabled (iNIT SLOTS):

Default value is “RouEvent.txt”.

140


table Close

Setting title Description / default valueNr. of games to the end after table close procedure is started:

When table close procedure is started (manually through master menu or automatically on the time set), the RNG will start (n) times set here and then it will stop. Default value is 3.

Automatic start of table close procedure at Sunday:

Time (hh:mm), when automatic table close procedure will be started on Sunday.

Automatic start of table close procedure at Monday:

Time (hh:mm), when automatic table close procedure will be started on Monday.

Automatic start of table close procedure at Tuesday:

Time (hh:mm), when automatic table close procedure will be started on Tuesday.

Automatic start of table close procedure at Wednesday:

Time (hh:mm), when automatic table close procedure will be started on Wednesday.

Automatic start of table close procedure at Thursday:

Time (hh:mm), when automatic table close procedure will be started on Thursday.

141


Setting title Description / default valueAutomatic start of table close procedure at Friday:

Time (hh:mm), when automatic table close procedure will be started on Friday.

Automatic start of table close procedure at Saturday:

Time (hh:mm), when automatic table close procedure will be started on Saturday.

142


gsm

Setting title Description / default valueSIM card pin number:SMS distribution center phone number:

143


Counters

Setting title Description / default valueCounter nr. 1-15 routed to mechanical counter nr.:

Software counter nr. 1-15 defined on play station will be routed to mechanical counter nr. (n) set here.

Mechanical counter devider - only for central mech. counters:

Divider for central mechanical couters connected to the center. Default value is 1.

144


g4 Center lights

Setting title Description / default valueLights synchronization by this Center:


Station colors: Led color Set color for center LEDs. Default values are 0.Twin machine colors: Screen color

Set playstation screen color. Default values are 0.

No more bets illumination PWM (0-min,64 max)

Works only if any of twin machine colors is set<>255. Default value is 64.

Bets allowed illumination PWM (0-min,64 max)

Works only if any of twin machine colors is set<>255. Default value is 10.

Fade time (0-64) Works only if any of twin machine colors is set<>255. Default value is 20.

145


Click on the “Station Colors” field displays a Color Picker Control for picking the colors of Play Stations for BlackJack and Community display PID.

146


Pid display

Setting title Description / default valueCommunication type: 1-serial port; 2-TCP/IP Serial port nr. for PID: TCP port nr. for PID: TCP port number for PID. Default value is 2333.Number of PIDs connected to Center:

Maximum number of connected PIDs (only when Communication type is 2)

Enable sending bet info to PID: If True, bet info from playstations sent to this Center will be forwarded to PID. Default value is False.

Display player bets by their colors (Community mode):

PID Displays players bets by their colors. Default value is False.

Display messages, warnings and error strings:

Displays messages received from RNG. Default value is False.

147


Setting title Description / default valueThreshold for sending winning Playstations to PID (in cents):

Threshold for sending winning Playstations to PID (in cents)

Number of winning Playstations to send:

Number of winning Playstations to send

148


Roulette

Setting title Description / default valueSerial port nr. for PLC or simulation:

Roulette hardware (PLC) or software serial port number. Default value is 1.

Cylinder offset: Use this to calibrate cylinder with numbers to get correct result reading. Default value is 21.

Ventilator time (ball speed): Total range with tolerance must not exceed 1-100. Default value is 60.

Ventilator time tolerance: Ventilator time will randomly change in range VentTime +/- VentTimeTolerance. Default value is 30.

Minimum difference of ventilator time from previous game:

Random value will be selected again if previous value from current differs for lest than (n). Default value is 5.

Rotating speed of cylinder 1-50: Default value is 30.

149


Setting title Description / default valueTolerance of rotating speed of the cylinder:

Speed will randomly change in range WellSpeed +/- WellSpeedTolerance. Default value is 20.

Minimum difference of cylinder speed from previous game:

Random value will be selected again if previous value from current differs for lest than (n). Default value is 5.

PLC data logging enabled on PLC ver.>3.08

Data log file for roulette software diagnostic (RSD Roulette settings and diagnostic software) software will be logged. Default value is False.

Camera stop position regulation step (0-16, 0 - no regulation):

If stop position is not correct, than the cylinder use this step in next cycle to stop in perfect position.

Camera stop position offset (number of pockets from 0 pos.):

This setting is used to set the position where the cylinder will stop, so that the camera can see the ball in the pocket.

Minimum number of revolutions for valid game:

Game will be cancelled if number of ball revolutions around the cylinder will not be at least this value.

Ball magazine enabled (PLC ver >4.00):

Ball magazine to change balls is enabled. Default value is False.

Ball is changed after n cycles (PLC ver >4.00):

One ball is used for n cycles before it is automatically changed using ball magazine. With PLC ver<4.00 only warning can be displayed

Game time in seconds: Time available for placing bets on the table. Value set here overrides value set in “Common Settings” tab. Default value is 60.

External simulation of roulette: enabled:

Software roulette RNG is used (not mechanical cylinder with PLC). Default value is False.

Send last bets command to HAL simulation:

Whether Center send command for last bets to HAL RNG (to start last bet animation sequence). Default value is False.

Manual roulette cylinder type (0-none, 1-Cammegh, 2-TCS):

Manual roulette cylinder type (0-none, 1-Cammegh, 2-TCS). Default value is 0.

Specify subtype (only for Cammegh cylinder type):

(2-Mercury II, 3-InRim reader, 4-OnRim reader).

Serial port for Manual Cylinder Manual Roulette Cylinder hardware serial port number. Default value is 1.

Min RPM (rounds/min): If current wheel speed is less than this setting, program will report Low speed. Default value is 10.

Max RPM (rounds/min): If current wheel speed is more than this setting, program will report High speed. Default value is 25.

Cammegh cylinder optional features:

1- early miss spin detection, 2 - drop zone detection, 4 - Macao numbered roulette wheel (Use sum of values for combinations)

Manual confirmation of the result enabled:

If set to False result is sent automatically to the stations. Default value is True.

Manual change of the result enabled:

Croupier can manually enter new result. Default value is True.

Game cancel will happen automatically:

If set to False, then attendant will have to push a button to cancel game, otherwise this will happen automatically. Default value is False.

Bikini side bet enabled (generate bikini results):

Roulette center will generate also bikini results. Default value is False.

150


g4 initial ValUes

Program InitialValues.exe is a restricted configuration program used for setting main initial values of the G5 Diamond gaming device.Settings set with InitialValues.exe are partially stored in Windows registry and partially in Settings.dat file in directory “D:\Data\”.

To change settings for G5 Diamond gaming device an USB keyboard and preferably an USB mouse should be connected to the computer (Logic Area 3).

Start configuration program InitialValues.exe from directory “C:\Programs\”. A number “Access code” will be given which must be entered into the G4GetPassword.exe program.

Start program G4GetPassword.exe from directory “C:\Programs\”. Input password and press “OK”.

Enter the Access code from Initial Values in the “Access code” text box, then press “Calculate password” to generate a unique 18 alphanumeric password.

Enter the unique 18 alphanumeric password back at the prompt in the InitialValues and press “Enter.”

note. The G4GetPassword.exe program is an external program which is available only to Technical Support and authorized technicians. It is used together with the “Access code” to provide a unique password to access InitialValues.A password is required to access G4GetPassword.exe.

151


acceptors

Setting title Description / default valueBill type 1-15 Value in currency ($€) of the bill note programmed in bill acceptor

FW position 1-15Coin type 1-6 Value in cents of the coin programmed in coin acceptor FW position

1-6Hopper 1-6 Routing mask (binary value) which should be set to route coin nr. 1-6

to hopper. If the value is not set here (0) it can be set in ini file.CB 1-6 Routing mask (binary value) which should be set to route coin nr. 1-6

to cash box. If the value is not set here (0) it can be set in ini file.Tilt counter nr. In casino coin module (where only one coin position1 is used) we set

here position of the counter (1-6, normally 3) which is incremented for tilts (fishing).

Currency sign: Sign for currency which is used on screen or ticket ($€…). Variables: $, €, L

Currency sign for cents: Sign for cents which is used on screen or ticket. Variables: c, pCredit value in cents: Denomination of the machine. Value of one credit in cents.Multi denomination is enabled When checked, “Credit value in cents” must be 1.

152


online

Setting title Description / default valueRemote credit add enabled Cash less transfer (AFT) enabled. This check box shall be checked to

enable any cashless transfers.SAS accounting denomination (in cents)

Accounting denomination reported to SAS and used to recalculate credit values sent to SAS.

GMID / Machine ID for stations nr. (1 – 255)

Gaming machine ID (asset number-play station) and Machine ID used for SAS, for station nr. (1 – 255).These values are set here for all stations, so that we can set all the settings only once and then clone settings.dat to all the stations.

Hostname/IP: Hostname for connection to IBOnline SQL server.DB name: Database name for connection to IBOnline SQL server.Username: Username for connection to IBOnline SQL server.Password: Password for connection to IBOnline SQL server.Request Enabled: Log Process request to send Log.dat file.Request Enabled: Hardware Process request to send Hardware.dat file.Request Enabled: Settings Process request to send Settings.dat file.Request Enabled: History Process request to send History.dat file.Request Enabled: Sas Data Process request to send SasData.dat file.Request Enabled: Accounting Process request to send Stevec.dat file.

153


switches

Setting title Description / default valueMain module optical switch UP Optical switch 1 on main module enabled (optional where required).Main module optical switch DOWN

Optical switch 2 on main module enabled (optional where required).

Bill module optical switch UP Optical switch 1 on bill module enabled (optional where required).Bill module optical switch DOWN Optical switch 2 on bill module enabled (optional where required).

154


Jackpot

Setting title Description / default valueJackpot type 0 - none, 1- Mystery Jackpot, 2 - House Edge Jackpot (Keno), 3 -

Double Zero Bonus, 4 - Roulette Mystery Jackpot based on wins straight numbers, 5 - Roulette Mystery progressive jackpot “Golden Chip”

155


Jackpot - mistery Jackpot

Setting title Description / default valueJackpot type 1- Mystery JackpotMin. stake to participate (cents) This is the criteria that determine which PlayStations are eligible

to win jackpot. Only players, whose cumulative bet is at least here defined amount of money, can hit the jackpot.

JackPot initial value Range for jackpot value in which jackpot will hit. Values are in currency.JackPot maximum value

Total cash in for jackpot Value represents Sum of all bets to reach the Jackpot maximum value. This determines the factor (the increment in %), how much will the current jackpot value increase for every bet.Important: Increment (in %) added to PRTP must be less or equal 100%.

Probability Set the hit ranges and their probabilities that Jackpot will be paid out in defined range. Value set in the first row must be equal to the Jackpot initial value setting. Value set in the last row must be equal to the Jackpot maximum value setting, so that the whole range from start to the maximum value is covered. Sum of all Percentages must be exactly 100%! If you don’t need 7 ranges, you can define only several, and leave others on “0”.

156


Setting title Description / default valueFrom (smaller value in $€) Setup for Anticipation mode: a random value is calculated between

“From” and ”To” value. When actual Jackpot value reaches the calculated Jackpot hit value minus this new random value, Play Stations enter into Anticipation mode. If these values are set to 0, anticipation mode is disabled.Example:Jackpot hit value, determined by jackpot controller is $150. “From” value is set to 5 and “To” value is set to 10. Anticipation mode in this case will be randomly selected by the jackpot controller in a range at the current jackpot value from $140 to $145.Elektroncek is NOT recommending enabling this option.

To (bigger valuein $€)

Game Types Enabled: By enabling the specific game, Generator becomes Jackpot Controller (JP Controller) for the selected game type (e.g. Roulette 0).That means JP Controller collects stakes from connected Play Stations (not necessarily playing on Generator which is JP controller) for all game types defined. It does not matter what kind of game type Generator is currently running. JP Controller increases JP value from stakes participating in this JP controller.If no game type is selected, all games played on this Generator participate on this JP. (E.g. if Generator is dice, Sic Bo and Craps played on this Generator will participate to this JP. If Sic Bo or Craps is played on any other Generator, stakes are not sent to this JP controller).

157


Jackpot - House edge Jackpot (keno)

Setting title Description / default valueJackpot type 2 - House Edge Jackpot (Keno)Min. stake to participate (cents) This is the criteria that determine which PlayStations are eligible


Jackpot start value (in € ) Start value of jackpot (when jackpot is payed out, this is the new start value).

Max. jackpot value (in € ) Jackpot will not rise over this value. Possible jackpot pool money will go to casino.

Return to the player (%) This will be the total RTP for the game after Jackpot payout.

158


Jackpot - double Zero Bonus

Setting title Description / default valueJackpot type 3 - Double Zero BonusMin. stake to participate (cents) This is the criteria that determine which PlayStations are eligible


Jackpot start value (in € ) Start value of jackpot (when jackpot is payed out, this is the new start value).

Max. jackpot value (in € ) Jackpot will not rise over this value. Possible jackpot pool money will go to casino.

Return to the player (%) This will be the total RTP for Roulette game after Jackpot payout.

159


Jackpot - Roulette mistery Jackpot based on Wins straight numbers

Setting title Description / default valueJackpot type 4 - Roulette Mystery Jackpot based on wins straight numbersMin. stake to participate (cents) This is the criteria that determine which PlayStations are eligible

to win jackpot. Only players, whose cumulative bet put on straight numbers is at least here defined amount of money, can hit the jackpot.


Total cash in for jack pot Value represents Sum of all bets to reach the Jackpot maximum value. This determines the factor (the increment in %), how much will the current jackpot value increase for every bet.Important: Increment (in %) added to PRTP must be less or equal 100%.

Probability Set the hit ranges and their probabilities that Jackpot will be paid out in defined range.Value set in the first row must be equal to the Jackpot initial value setting. Value set in the last row must be equal to the Jackpot maximum value setting, so that the whole range from start to the maximum value is covered. Sum of all Percentages must be exactly 100%! If you don’t need 7 ranges, you can define only several, and leave others on “0”.

160


Setting title Description / default valueFrom (smaller value in $€) Setup for Anticipation mode: a random value is calculated between

“From” and ”To” value. When actual Jackpot value reaches the calculated Jackpot hit value minus this new random value, Play Stations enter into Anticipation mode. If these values are set to 0, anticipation mode is disabled.Example:Jackpot hit value, determined by jackpot controller is $150. “From” value is set to 5 and “To” value is set to 10. Anticipation mode in this case will be randomly selected by the jackpot controller in a range at the current jackpot value from $140 to $145.Elektroncek is NOT recommending enabling this option.

To (bigger valuein $€)

161


Jackpot - Roulette mystery Progressive Jackpot “golden Chip”

Setting title Description / default valueJackpot type 5 - Roulette Mystery progressive jackpot “Golden Chip”Min. stake to participate (cents) This is the criteria that determine which PlayStations are eligible



Total cash in for jack pot Value represents Sum of all bets to reach the Jackpot maximum value. This determines the factor (the increment in %), how much will the current jackpot value increase for every bet.Important: Increment (in %) added to RTP must be less or equal 100%.

Min. number of games played (per Playstation) since last GC awarded:

Value represents minimum number of games to be played after last awarded “Golden Chip” (per Play Station, with stakes that met “Min stake to participate” criteria) to start new GC Jackpot award cycle.

Average number of played games (per Playstation) till GC is awarded:

Average number of played games (per Play Station, with stakes that met “Min stake to participate” criteria) in the GC Jackpot award cycle.

162


Setting title Description / default valueHow to determine winning station

• Normal random – winning station is randomly selected between all stations which met the “Min stake to participate” criteria.

• Linearly weighted random – random selection of wining station is linearly weighted according to the percentage share of single station bets in total sum of all stations bets on which the “Min stake to participate” criteria is met.

163


database settings

Setting title Description / default valueSettings file location Location of ini and settings(c).dat files.Database path location Location of all other database (*.dat) files.Static database location Location of Hardware(c).dat files. If not set than database path

location is used.Log.dat size Size of Log(c).dat used for logging in bytes.History.dat size Size of History.dat used for game history in bytes.Log.dat size Size of Log(c).dat used for logging in number of records (entry's).History.dat size Size of History.dat used for game history in number of records

(games).Username for Update PC administrator (admin2) user name, used for automatic commit

when distribute program is used. This is not used when BIOS security is enabled!

Password for Update PC administrator (admin2) password, used for automatic commit when distribute program is used. This is not used when BIOS security is enabled!

Mirror Databases First and second mirror location of all database files.

164


Counters

Setting title Description / default valueCounter security checking When mechanical counter module is enabled, software will check

and compare the values which are stored in counter module with the values on the PC.

Mechanical counter I2C module Mechanical counter module is enabled.Number of mechanical counters Number of mechanical counters installed in counter module.Save Save the accounting model defined in the grid bellow the file.Restore counters Restore the accounting model from the file to the grid bellow.Counter divider Divider for the values sent to mechanical counter. If no mechanical

counters are installed it should be set to 0!Accounting value in cents Accounting denomination for other counters. In database they are

always stored in cents.Counter names Define counter names.“Counters” Define the values which will be counted on which counter number.

Counter definitions 1-Number of mechanical counters setting, will be also used for mechanical counters.

165


access Permissions

Setting title Description / default valueMaster menu access If checked the master card level will have access to this button in

the master menu.Event log access If checked the master card level will have access to this button in

the master menu -> event logs.Other access permissions If checked the master card level will have permission to perform this

operation.

166


security

Setting title Description / default valuePlay station Hardware database Show play station program (hardware.dat) database.Center Hardware database Show center program (hardwarec.dat) database.Memory Check of RAM modules Enabled

Program will check SHA1 signatures of executables and DLL loaded in RAM.

LockIfChanged for RAM modules If RAM module (executable or DLL) will be discovered in RAM in will automatically set Lock if changed check box to hardware database.

RamClearIfChanged for RAM modules

If RAM module (executable or DLL) will be discovered in RAM in will automatically set Ram clear if changed check box to hardware database.

DOM files check enabled Program will check DOM (disk on module d:) if files located there are allowed.

Statical files check enabled Program will check selected image and sound files SHA1 signatures.Images check enabled Program will check all image files SHA1 signatures.

Sounds check enabled Program will check sound files SHA1 signatures.Screensaver images check enabled

Program will check all screensaver image files SHA1 signatures.

Checking of dynamic databases enabled

Program will check SHA1 signatures of executables in DLL loaded in RAM.

167


Setting title Description / default valueBIOS signature check enabled Program will check for BIOS SHA1 signature (Needs AfuWin.exe;

ensure that user name and password is set in Database tab).CF signature check enabled Program will check for CF (c: disk) SHA1 signature (Needs AfuWin.

exe; ensure that user name and password is set in Database tab).Check program expiration Center software will expire at the date which is set. Password for

setting program expiration must be entered in Center every time after RAM reset.

RNG chi-square check sequence (center.exe)

Center program will check chi-square on number of games set here.

Game not allowed until CF read is finished (ensure that user name and password is set in Database tab)

If checked, program will be in “Integrity check in progress” until CF (c: disk) SHA1 signature calculation is completed (ensure that user name and password is set in Database tab).

168


multi game

Setting title Description / default valueGame 1 - 18 Set the game type for game number 1 - 18Game 1 - 18 Odds: Set the game odds for game number 1 - 18Game 1 - 18 Side bets Set the game side bet for game number 1 - 18Game 1 - 18 Game Internal Bonuses

Set the Game Internal Bonus (External Bonus Event) for game number 1 - 18

169


other stuff

Setting title Variable Description / default valueWhat action to take after Forced reset stake:

Ask what to do, Return stakes without asking, Lose stakes without asking

If the software is reset after no more bets with the bet>0, the program will require attendant intervention with selected option.

Roulette type (order of numbers on a single zero):

REGULAR;MONTE CARLO (double zero with 00 removed); MACAO (double zero with 0 removed)

Type of Roulette wheel.

Roulette imprisonment: NONE; FRENCH Return half of stakes on simple bet if winning number is “0”.

Croupier Tip Type: None; Single bets - Automatic; Single bets - Dialig with default “No”

Croupier Tip Type (only enabled foe Roulette)

Max stake limit on one board for one game (in cents):

Define the maximum value of bets, which can be placed on the station in one game (in cents). If value is >0, all “Max stake limit” settings in “G4Settings.exe” will be overrided.

170


Setting title Variable Description / default valueMax. win amount from one game (in cents):

Define the maximum win amount from one game (in cents). If value is >0, all “Max. win amount” settings in “G4Settings.exe” will be overrided.

Credit limit (in cents): Define maximum credit allowed on the station (in cents). If value is >0, all “Credit limit” settings in “G4Settings.exe” will be overrided.

Internal Bonuses Number of games to be played in Ferrary Tournament (External Bonus Event), so that player receives a ticket; Ferrary Tournament has to be sellected under “Multi Game” tab for each game separately.

CF Signature Encryption This will generate database with encrypted CF signature. You need to have access to private key.

G5 Diamond Gaming Device - Interblock Diamond Service Diamond Roulette... · G5 Diamond Roulette...

Documents

Transcript of G5 Diamond Gaming Device - Interblock Diamond Service Diamond Roulette... · G5 Diamond Roulette...