G-Series Compact Excavators 35G, 50G, 60G DKAXGCCE
Transcript of G-Series Compact Excavators 35G, 50G, 60G DKAXGCCE
G-SERIES
COMPACT EXCAVATORS
35G / 50G / 60G
COMPACT
OPERATORS
RELIABLE PRODUCTIVE
+
SMALLER MACHINES,
BIGGER DEAL.
WE’VE GOT YOU COVERED
For challenging climates or work conditions, you’re sure to appreciate the 60G canopy option (canopies are standard on the 35G and 50G).
4
MAKE A BIGGER IMPACT
WITH OUR COMPACTS. Inspired by input from equipment owners and operators like you, these nimble machines are loaded with customer-driven ideas. Such as a spacious cab with a wide entryway. Large expanse of glass for expansive visibility. Fuel-saving auto-shutdown and power/economy work modes. Plus three large service doors that allow wide-open access to maintenance items such as side-by-side coolers, for simplified core clean-out. Get a G-Series and get the same power, productivity, reliability, and comfort
you’ve come to expect from our other compacts — in an even more operator-friendly package.
ONE AND DONE
SEE WHAT YOU CAN DO. Looking to get more out of your compact excavator? Make your next machine one of our G-Series models and get more done.
Modes of operation
Power/economy work modes allow you to match engine speed to the application. Select Power mode and get the higher engine speeds needed for most general digging work. For lighter digging demands, Economy mode reduces engine speed and noise, while improving IXHO�HI�FLHQF\�
At home in the cab
With large entryways and virtually unrestricted sightlines, the spacious operator stations of G-Series machines deliver the comfort, convenience, and visibility an operator needs. And then some.
Compact by design
Zero-tail-swing (35G and 50G) and reduced-tail-swing (60G) designs make these compacts extra maneuverable and plenty productive in places with tight spaces.
Auto-idle and auto shutdown
Auto-idle automatically reduces engine speed when hydraulics aren’t in use. Auto shutdown further preserves every precious drop of fuel.
Dig and go
G-Series Compacts transport easily between jobsites, making them perfect for “dig-and-go” jobs. Enlarged tie-down openings allow these machines to be secured with the same-size chains used on your larger equipment.
EASY TO TRAILER
STANDOUT FEATURE
COMPACT AND QUIETSIZE UP THE POSSIBILITIES.
Their compact sizes and zero-tail-swing (35G and 50G) and reduced-tail-swing (60G) designs enable these small-but-mighty machines to specialize in close-quarters work. 7KHLU�IXHO�HI�FLHQW��GLUHFW�LQMHFWHG�GLHVHOV�PHHW�(3$�)LQDO�7LHU����)7���(8�6WDJH�,9 emission standards and are so quiet you can put them to work almost anywhere, any time. 6WDQGDUG�HTXLSSHG�ZLWK�EDFN�OO�EODGH��PHFKDQLFDO�TXLFN�FRXSOHU��DQG�DX[LOLDU\�K\GUDXOLFV��
plus any of many optional John Deere attachments, they can make a sizable impact on \RXU�SURGXFWLYLW\��$QG�\RXU�SUR�WDELOLW\��
6
Load up
Truck sideboards are no problem for these compacts. Lift height and reach are plentiful, making truck loading easy.
Underground and all around
Comfortably unrestricted visibility, precise feel, and smooth control make our compacts ideal for excavating around existing utilities.
Make tracks
Choose the tracks that are best for the way you work. Rubber tracks traverse virtually any terrain, including paved surfaces. Steel tracks and steel tracks with rubber pads are also available. Optional rubber grousers combine work-anywhere flexibility with steel-track serviceability.
Overcome obstacles
Why allow obstacles to dictate how you work? Get a G-Series Compact and put its independent-swing boom and 360-degree rotation to good use.
UNDER
56"*
TAIL-SWING RADIUS
*For 60G w/ extra counterweight.
8
COMFORTABLE PRODUCTIVITYIT HARDLY SEEMS LIKE WORK.
Step aboard one of these excavators and you’ll discover that compacts don’t have to be uncomfortable. Spacious operator stations won’t cramp your style. Seats, pedals, and controls are positioned to accommodate bigger operators. And expansive visibility provides a commanding view of the work at hand and jobsite around you. For year-round productivity, add a heated and air-conditioned cab. Just like our canopy-equipped models — including a 60G canopy option — roominess and comfort are maximized.
At a glance
Durable monitor provides vital operating info at a glance and fingertip control of several functions, including auto shutdown, power/economy modes, and auto exhaust-filter cleaning. Plus two trip meters let you track engine oil and hydraulic oil changes, or jobsite hours.
Take control
Go from backhoe- to excavator-style controls with a simple twist of your wrist. Control-pattern selector valve is conveniently located in a compartment beneath the seat.
Smooth operator
Ergonomic short-throw pilot-control levers provide smooth, predictable low-effort fingertip operation.
Clear and cool
Automatic, high-velocity bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear and the cab comfortable.
Room for more
Swing boom and foldable travel pedals are positioned where they’re easy to operate, yet allow plenty of foot room.
Highly visible
Single-hinge door and front glass that is 2-inches wider and 6-inches taller than on previous models enable excellent visibility.
Safe travels
No operator activation is required for high-speed travel. Track speeds automatically slow to low whenever the travel motors encounter a heavier load. Includes a console-mounted, low-speed lock switch.
Quiet on the job
Noise-reducing muffler (35G) and aftertreatment device (50G/60G), plus isochronous high-idle speed, help keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue.
SINGLE-HINGE DOOR
AIDS VISIBILITY
TOUGH WHERE IT’S NEEDEDBUILT TO TAKE IT ON.
Don’t let their compact statures fool you. Like their larger G-Series siblings, the 35G, 50G, and 60G are exceptionally durable. And for good reason — they share many of the same uptime-boosting features such as powdered-metal oil-impregnated boom, arm, and bucket bushings. Rigid, reinforced D-channel side frames. And heavy-duty X-frames. When you know how they’re built, you’ll see how tough they are.
10
HEAVY-DUTY &
STABLE X-FRAME
Material protection
Heavy-duty shields deflect material and impacts, protecting the boom/ blade cylinders and drive motors.
X marks the spot
Heavy-duty X-frame provides a solid, stable platform that resists material and dirt buildup.
Designed for durability
Rigid, reinforced D-channel side frames resist impact, for maximum cab and component protection.
Extended intervals
Oil-impregnated bushings enhance durability and extend grease intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket.
Put the brakes on
Spring-applied, hydraulically released park brake automatically engages when a control lever is released, to help prevent accidental machine movement.
Integral integrity
Single-pin swing-post increases boom rigidity, enhancing the structural integrity of digging components. Wear-resistant hoses are routed for protection and Cordura®-wrapped where exposed.
Core construction
Unique steel cores help the rubber tracks resist cracking. Large-diameter drive sprockets and track idlers further add to undercarriage durability.
SET YOUR SIGHTS ON GETTING MORE DONE.
12
ARM YOURSELFFOR MORE PRODUCTIVITY.
Want to do even more with these highly versatile compacts? Add any of the many available buckets and John Deere attachments to your equipment arsenal and watch utilization take off. G-Series Compacts arrive attachment-ready with boom-mounted auxiliary hydraulic lines and a quick-coupler that let you go from bucket to plate compactor to whatever, quickly and easily. See your John Deere dealer today for details and financing options.
VERSATILE JOHN DEERE ATTACHMENTS
Change it up
Wedge-style coupler enables quick changes and accepts a wide variety of buckets and attachments, such as hydraulic hammers and augers.
Easy additions
Standard quick-coupler-equipped, boom-mounted auxiliary hydraulic lines make attachment hookup a snap.
Pull through the muck
Ditch-cleaning buckets from 34- to 42-inches wide handle loose materials or muck.
Reach for more
Need more digging depth or reach? Choose the long-arm/heavy-counter-weight option for an increase in both.
Hardly all thumbs
Add a top clamp for thumb-like dexterity that comes in handy when handling cumbersome objects or cleaning up jobsites.
Break on through
Bust through blacktop, concrete, or other solid surfaces with a John Deere hydraulic hammer. Front cab screens are available to help prevent damage to the glass.
Fleet flexibility
John Deere attachments work on a wide range of Deere and other makes of compact machines, so you can make the most of your investment.
Handy hydraulics
Return-flow selector valve accommodates hydraulic-driven attachments that operate either one or two ways. Make changes with just a twist of the wrist.
14
SIMPLE SERVICEABILITYWON’T BUST YOUR TAIL OR YOUR BUDGET.
Ground-level service
Routine checks such as engine oil level are quickly accomplished from ground level. Convenient lube/maintenance FKDUW�KHOSV�FRQ�UP�WKDW�QRWKLQJ� gets overlooked.
Keep it clean
6HDPOHVV�GLHVHO�SDUWLFXODWH��OWHU (DPF) cleaning happens automatically without impacting machine productivity. Minimum service interval is 6,000 hours and can be done by your John Deere dealer.
Check it out
+\GUDXOLF�XLG�VLJKW�JDXJH�DQG� see-through coolant reservoir let you quickly check levels.
Forward tilt
Operator station tilts forward 50 degrees, bringing the swing motor, hydraulic control valve, engine starter motor, and alternator within reach.
Engine tech
7KH�)7��6WDJH�,9�WHFKQRORJ\�LQ�RXU�
H[FDYDWRUV�LV�VLPSOH��IXHO�HI�FLHQW��IXOO\ integrated, and fully supported. In the ��*�DQG���*��LW�HPSOR\V��HOG�SURYHQ�
cooled exhaust gas recirculation (EGR) for reducing NO
X, and a DPF and diesel
oxidation catalyst (DOC) to reduce particulate matter. The 35G doesn’t require an aftertreatment system to meet emission requirements.
Easy access
Hinged door provides wide-open access to the side-by-side oil cooler and radiator for easier core clean-out.
Track maintenance
A simple grease gun and a wrench are all it takes to quickly maintain proper track tension.
Work longer
9HUWLFDO�VSLQ�RQ��OWHUV�DOORZ�TXLFN and clean changes. Large fuel tanks and 500- and 2,000-hour engine and hydraulic oil-service and 500-hour greasing intervals enable these excavators to work longer between stops for scheduled service.
16
While general information, pictures, and descriptions are provided, some illustrations and text may include product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories
PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
Engine 35G
Manufacturer and Model Yanmar 3TNV88F
Non-Road Emission Standard EPA Final Tier 4/EU Stage IV
Displacement ������/��������FX��LQ��
1HW�3RZHU��,62������ �����N:�������KS��DW�������USP
Powertrain
(DFK�WUDFN�LQGHSHQGHQWO\�GULYHQ�E\�K\GURVWDWLF�D[LDO�SLVWRQ�PRWRU�FRQQHFWHG�WR���VWDJH�SODQHWDU\�JHDU�UHGXFWLRQ�ER[
Maximum Travel Speed
� /RZ ����NP�K������PSK�
High ����NP�K������PSK�
Hydraulics
2SHQ�FHQWHU�ZLWK���YDULDEOH�GLVSODFHPHQW�SXPSV�DQG����[HG�JHDU�SXPS
3XPS�)ORZ
Piston ��[������/�P����[������JSP�
Gear �����/�P������JSP�
$X[LOLDU\�)ORZ �����/�P�������JSP�
Controls ��K\GUDXOLF�SLORW�RSHUDWHG�FRQWUROV�IRU�ERRP��DUP��EXFNHW��VZLQJ��ERRP�VZLQJ��WUDYHO��DQG�DX[LOLDU\�IXQFWLRQV
Electrical
Alternator Rating 55 amp
:RUN�/LJKWV ��KDORJHQ����PRXQWHG�RQ�RSHUDWRUɕV�VWDWLRQ�DQG���PRXQWHG�RQ�ERRP
Undercarriage
7UDFN��5XEEHU ����PP�����LQ��
Ground Pressure 1315-mm (4 ft. 4 in.)
Standard Arm, Canopy, and
Standard Counterweight
1315-mm (4 ft. 4 in.)
Standard Arm, Cab, and
Standard Counterweight
1715-mm (5 ft. 8 in.)
Long Arm, Canopy, and
Extra Counterweight
1715-mm (5 ft. 8 in.)
Long Arm, Cab, and
Extra Counterweight
� :LWK�5XEEHU�7UDFN �����N3D������SVL� �����N3D������SVL� �����N3D������SVL� �����N3D������SVL�
Upperstructure
6ZLQJ�6SHHG ����USP
,QGHSHQGHQW�6ZLQJ�%RRP Canopy Cab
Left ���GHJ� ���GHJ�
Right ���GHJ� ���GHJ�
6ZLQJ�%UDNH Spring applied, hydraulically released, automatic, disc type
Serviceability
3E�LL�$APACITIES
� )XHO�7DQN ���/�������JDO��
Cooling System ����/������TW��
Engine Oil With Filter ����/������TW��
� +\GUDXOLF�7DQN ���/������JDO��
Operating Weights
1315-mm (4 ft. 4 in.)
Standard Arm, Canopy, and
Standard Counterweight
1315-mm (4 ft. 4 in.)
Standard Arm, Cab, and
Standard Counterweight
1715-mm (5 ft. 8 in.)
Long Arm, Canopy, and
Extra Counterweight
1715-mm (5 ft. 8 in.)
Long Arm, Cab, and
Extra Counterweight
:LWK�)XOO�)XHO�7DQN�DQG����NJ������OE���2SHUDWRU �����NJ��������OE�� �����NJ��������OE�� �����NJ��������OE�� �����NJ��������OE��
Optional Angle Blade ����NJ������OE�� ����NJ������OE�� ����NJ������OE�� ����NJ������OE��
&RXQWHUZHLJKW
Standard ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE��
Additional ����NJ������OE�� ����NJ������OE�� ����NJ������OE�� ����NJ������OE��
SPECIFICATIONS
While general information, pictures, and descriptions are provided, some illustrations and text may include product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
Machine DimensionsG Upperstructure Width �����P����IW����LQ��
H Overall HeightCanopy �����P����IW����LQ��
&DE �����P����IW����LQ��
I 7UDFN�:LGWK ����PP�����LQ��
J Undercarriage Width �����P����IW����LQ��
K Ground Clearance ����PP�����LQ��
L 7DLO�6ZLQJ�5DGLXV
With Standard Arm ����PP�����LQ��
:LWK�/RQJ�$UP�DQG�([WUD�&RXQWHUZHLJKW ����PP�����LQ��
G
H
IJ
L
M
N
O
PQ
R
K
-IFT�$APACITIES
Boldface type LQGLFDWHV�K\GUDXOLFDOO\�OLPLWHG�FDSDFLW\��OLJKWIDFH�W\SH�LQGLFDWHV�VWDELOLW\�OLPLWHG�FDSDFLWLHV��LQ�NJ��OE����$OO�OLIW�FDSDFLWLHV�DUH�EDVHG�RQ�,62��������ZLWK�SRZHU�ERRVW���/LIWLQJ�PHDVXUHPHQW�IURP�FHQWHU�RI�DUP�WR�EXFNHW�SLQ��ZLWK�����PP�����LQ���WUDFN�VKRH�DQG�EODGH�RQ�JURXQG��DQG�VLWXDWHG�RQ��UP��OHYHO��XQLIRUP�VXSSRUWLQJ�VXUIDFH� 7RWDO�ORDG�LQFOXGHV�ZHLJKW�RI�FDEOHV��KRRN��HWF��)LJXUHV�GR�QRW�H[FHHG����SHUFHQW�RI�K\GUDXOLF�FDSDFLWLHV�RU����SHUFHQW�RI�ZHLJKW�QHHGHG�WR�WLS�PDFKLQH�
Canopy and Standard
Counterweight
Cab and Standard
Counterweight
Canopy and Extra
Counterweight
Cab and Extra
Counterweight
Ground Level at 3.05-m (10 ft.) Radius Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
�����PP����IW����LQ���6WDQGDUG�$UP �����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
�����PP����IW����LQ���/RQJ�$UP �����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
�����NJ �������OE��
����NJ �������OE��
E
A
B
F
D
$
SPECIFICATIONS
Operating Dimensions 35G1315-mm (4 ft. 4 in.)
Standard Arm and Canopy
1315-mm (4 ft. 4 in.)
Standard Arm and Cab
1715-mm (5 ft. 8 in.)
Long Arm and Canopy
1715-mm (5 ft. 8 in.)
Long Arm and Cab
A Maximum Cutting Height �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
B Maximum Dumping Height �����P�����IW����LQ�� �����P�����IW�����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
$ Maximum Digging Depth �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
D Maximum Digging Reach �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
E 0LQLPXP�)URQW�6ZLQJ�5DGLXV �����P����IW�����LQ�� �����P����IW����LQ�� �����P����IW����LQ�� �����P����IW����LQ��
F Transport Length �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
'LJJLQJ�)RUFH��,62�
Arm �����N1��������OE�� �����N1��������OE�� �����N1��������OE�� �����N1��������OE��
%XFNHW �����N1��������OE�� �����N1��������OE�� �����N1��������OE�� �����N1��������OE��
M Engine Cover Height �����P����IW����LQ��
N 0D[LPXP�%ODGH�/LIW�$ERYH�*URXQG ����PP�������LQ��
O 0D[LPXP�%ODGH�'URS�%HORZ�*URXQG ����PP�������LQ��
Blade Width �����P����IW����LQ��
Height ����PP�������LQ��
P 6SURFNHW�&HQWHU�WR�,GOHU�&HQWHU �����P����IW����LQ��
Q Undercarriage Length �����P����IW�����LQ��
R &RXQWHUZHLJKW�&OHDUDQFH ����PP�����LQ��
While general information, pictures, and descriptions are provided, some illustrations and text may include product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories
PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
18
Engine 50G
Manufacturer and Model Yanmar 4TNV88C
Non-Road Emission Standard EPA Final Tier 4/EU Stage IV
Displacement �����/������FX��LQ��
1HW�3RZHU��,62������ �����N:�������KS��DW�������USP
Powertrain
(DFK�WUDFN�LQGHSHQGHQWO\�GULYHQ�E\�K\GURVWDWLF�D[LDO�SLVWRQ�PRWRU�FRQQHFWHG�WR���VWDJH�SODQHWDU\�JHDU�UHGXFWLRQ�ER[
Maximum Travel Speed
� /RZ ����NP�K������PSK�
High ����NP�K������PSK�
Hydraulics
&ORVHG�FHQWHU�ORDG�VHQVLQJ�ZLWK���YDULDEOH�GLVSODFHPHQW�SXPS
3XPS�)ORZ ������/�P�������JSP�
$X[LOLDU\�)ORZ �����/�P�������JSP�
Controls +\GUDXOLF�SLORW�RSHUDWHG�FRQWUROV�IRU�ERRP��DUP��EXFNHW��VZLQJ��ERRP�VZLQJ��EODGH��WUDYHO��DQG�DX[LOLDU\�IXQFWLRQV
Electrical
Alternator Rating 55 amp
:RUN�/LJKWV ��KDORJHQ����PRXQWHG�RQ�RSHUDWRUɕV�VWDWLRQ�DQG���PRXQWHG�RQ�ERRP
Undercarriage
7UDFN��5XEEHU ����PP�����LQ��
Ground Pressure 1380-mm (4 ft. 6 in.)
Standard Arm, Canopy, and
Standard Counterweight
1380-mm (4 ft. 6 in.)
Standard Arm, Cab, and
Standard Counterweight
1690-mm (5 ft. 7 in.)
Long Arm, Canopy, and
Extra Counterweight
1690-mm (5 ft. 7 in.)
Long Arm, Cab, and
Extra Counterweight
� :LWK�5XEEHU�7UDFN �����N3D�������SVL� �����N3D�������SVL� �����N3D�������SVL� �����N3D�������SVL�
Upperstructure
6ZLQJ�6SHHG ����USP
,QGHSHQGHQW�6ZLQJ�%RRP
Left ���GHJ�
Right ���GHJ�
6ZLQJ�%UDNH Spring applied, hydraulically released, automatic, disc type
Serviceability
3E�LL�$APACITIES
� )XHO�7DQN ���/�������JDO��
Cooling System ����/������TW��
Engine Oil With Filter ����/������TW��
� +\GUDXOLF�7DQN ���/�������JDO��
Operating Weights
1380-mm (4 ft. 6 in.)
Standard Arm, Canopy, and
Standard Counterweight
1380-mm (4 ft. 6 in.)
Standard Arm, Cab, and
Standard Counterweight
1690-mm (5 ft. 7 in.)
Long Arm, Canopy, and
Extra Counterweight
1690-mm (5 ft. 7 in.)
Long Arm, Cab, and
Extra Counterweight
:LWK�����PP�����LQ���5XEEHU�7UDFN��6WUDLJKW�%ODGH� )XOO�)XHO�7DQN��DQG����NJ������OE���2SHUDWRU
�����NJ���������OE�� �����NJ���������OE�� �����NJ���������OE�� �����NJ���������OE��
Optional Angle Blade ����NJ������OE�� ����NJ������OE�� ����NJ������OE�� ����NJ������OE��
&RXQWHUZHLJKW
Standard ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE��
Additional ����NJ������OE�� ����NJ������OE�� ����NJ������OE�� ����NJ������OE��
SPECIFICATIONS
While general information, pictures, and descriptions are provided, some illustrations and text may include
product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories
PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
Machine Dimensions
G Upperstructure Width �����P����IW����LQ��
H Overall Height
Canopy �����P����IW����LQ��
Cab �����P����IW����LQ��
I Track Width ����PP�����LQ��
J Undercarriage Width �����P����IW����LQ��
K Ground Clearance ����PP�����LQ��
L 7DLO�6ZLQJ�5DGLXV
With Standard Arm �����P�����LQ��
:LWK�/RQJ�$UP�DQG�([WUD�&RXQWHUZHLJKW �����P�����LQ��
G
H
I
J
L
M
N
O
PQ
R
K
Lift Capacities
Boldface type LQGLFDWHV�K\GUDXOLFDOO\�OLPLWHG�FDSDFLW\��OLJKWIDFH�W\SH�LQGLFDWHV�VWDELOLW\�OLPLWHG�FDSDFLWLHV��LQ�NJ��OE����$OO�OLIW�FDSDFLWLHV�DUH�EDVHG�RQ�,62��������ZLWK�SRZHU�ERRVW���/LIWLQJ�PHDVXUHPHQW�IURP�FHQWHU�RI�DUP�WR�EXFNHW�SLQ��ZLWK�����PP�����LQ���WUDFN�VKRH�DQG�EODGH�RQ�JURXQG��DQG�VLWXDWHG�RQ��UP��OHYHO��XQLIRUP�VXSSRUWLQJ�VXUIDFH�7RWDO�ORDG�LQFOXGHV�ZHLJKW�RI�FDEOHV��KRRN��HWF��)LJXUHV�GR�QRW�H[FHHG����SHUFHQW�RI�K\GUDXOLF�FDSDFLWLHV�RU����SHUFHQW�RI�ZHLJKW�QHHGHG�WR�WLS�PDFKLQH�
Canopy and Standard Counterweight
Cab and Standard Counterweight
Canopy and Extra Counterweight
Cab and Extra Counterweight
Ground Level at 3.05-m (10 ft.) Radius Over Front* Over Side Over Front* Over Side Over Front* Over Side Over Front* Over Side
�����PP����IW����LQ���6WDQGDUG�$UP �����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����PP����IW����LQ���/RQJ�$UP �����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
�����NJ �������OE��
E
A
B
F
D
C
SPECIFICATIONS
Operating Dimensions 50G
1380-mm (4 ft. 6 in.) Standard Arm and Canopy
1380-mm (4 ft. 6 in.) Standard Arm and Cab
1690-mm (5 ft. 7 in.) Long Arm and Canopy
1690-mm (5 ft. 7 in.) Long Arm and Cab
A Maximum Cutting Height �����P�����IW�����LQ�� �����P�����IW�����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
B Maximum Dumping Height �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
C Maximum Digging Depth �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
D 0D[LPXP�'LJJLQJ�5HDFK �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
E 0LQLPXP�)URQW�6ZLQJ�5DGLXV �����P����IW����LQ�� �����P����IW����LQ�� �����P����IW����LQ�� �����P����IW����LQ��
F Transport Length �����P�����IW�����LQ�� �����P�����IW�����LQ�� �����P�����IW����LQ�� �����P�����IW����LQ��
'LJJLQJ�)RUFH��,62�
Arm �����N1��������OE�� �����N1��������OE�� �����N1��������OE�� �����N1��������OE��
Bucket �����N1��������OE�� �����N1��������OE�� �����N1��������OE�� �����N1��������OE��
M Engine Cover Height �����P����IW����LQ��
N Maximum Blade Lift Above Ground ����PP�����LQ��
O 0D[LPXP�%ODGH�'URS�%HORZ�*URXQG ����PP�����LQ��
Blade
Width �����P����IW����LQ��
Height ����PP�����LQ��
P Sprocket Center to Idler Center �����P����IW����LQ��
Q Track Length �����P����IW����LQ��
R &RXQWHUZHLJKW�&OHDUDQFH ����PP�����LQ��
While general information, pictures, and descriptions are provided, some illustrations and text may include
product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories
PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
20
Engine 60G
Manufacturer and Model Yanmar 4TNV98C-WHB
Non-Road Emission Standard EPA Final Tier 4/EU Stage IV
Displacement �����/������FX��LQ��
1HW�5DWHG�3RZHU��,62������ �����N:�����KS��DW�������USP
Powertrain
��VSHHG�SURSHO�ZLWK�DXWRPDWLF�VKLIW��HDFK�WUDFN�LQGHSHQGHQWO\�GULYHQ�E\�K\GURVWDWLF�D[LDO�SLVWRQ�PRWRU�FRQQHFWHG�WR���VWDJH�SODQHWDU\�JHDU�UHGXFWLRQ�ER[
Maximum Travel Speed
6ORZ ����NP�K������PSK�
Fast ����NP�K������PSK�
Hydraulics
Open-center, pilot-operated
Main Pumps ��YDULDEOH�GLVSODFHPHQW�SXPS
0D[LPXP�5DWHG�)ORZ ����/�P�������JSP�
$X[LOLDU\�0D[LPXP�5DWHG�)ORZ �����/�P�������JSP�
Controls ��K\GUDXOLF�SLORW�RSHUDWHG�FRQWUROV�IRU�ERRP��DUP��EXFNHW��VZLQJ��ERRP�VZLQJ��WUDYHO��DQG�DX[LOLDU\�IXQFWLRQV
Electrical
Alternator Rating ���DPS
:RUN�/LJKWV ��KDORJHQ����PRXQWHG�RQ�RSHUDWRUɕV�VWDWLRQ�DQG���PRXQWHG�RQ�ERRP
Undercarriage
7UDFN�6KRH�:LGWK��6WDQGDUG�&RQ�JXUDWLRQ ����PP�����LQ��
Ground Pressure 1500-mm (4 ft. 11 in.) Standard Arm and Canopy
1500-mm (4 ft. 11 in.) Standard Arm and Cab
1850-mm (6 ft. 1 in.) Long Arm* and Canopy
1850-mm (6 ft. 1 in.) Long Arm* and Cab
:LWK�����PP�����LQ���5XEEHU�7UDFN ���N3D������SVL� ���N3D������SVL� ���N3D������SVL� ���N3D������SVL�
*Add counterweight.
Upperstructure
6ZLQJ�6SHHG��5LJKW�/HIW ����USP
0D[LPXP�%RRP�6ZLQJ�$QJOH
Left ���GHJ�
Right ���GHJ�
6ZLQJ�%UDNH Spring applied, hydraulically released, automatic, disc type
Serviceability
5H�OO�&DSDFLWLHV
)XHO�7DQN ����/�������JDO��
Engine Coolant ����/����JDO��
Engine Oil With Filter �����/����JDO��
+\GUDXOLF�7DQN ���/�������JDO��
Operating Weights
1500-mm (4 ft. 11 in.) Standard Arm, Canopy, and 400-mm (12 in.) Track
1500-mm (4 ft. 11 in.) Standard Arm, Cab, and 400-mm (12 in.) Track
1850-mm (6 ft. 1 in.) Long Arm, Canopy, and 400-mm (12 in.) Track
1850-mm (6 ft. 1 in.) Long Arm, Cab, and 400-mm (12 in.) Track
Rubber Steel Rubber Steel Rubber Steel Rubber Steel
:LWK�����NJ��������OE���&RXQWHUZHLJKW������PP
����LQ��������NJ������OE���%XFNHW��)XOO�)XHO�7DQN��DQG����NJ������OE���2SHUDWRU
�����NJ���������OE��
�����NJ���������OE��
�����NJ���������OE���
�����NJ���������OE���
�����NJ���������OE��
�����NJ���������OE��
�����NJ���������OE��
�����NJ���������OE��
Angle Blade ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE��
&RXQWHUZHLJKW
6WDQGDUG��LQFOXGLQJ�KDUGZDUH� ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE�� ����NJ��������OE��
Additional ����NJ������OE�� ����NJ������OE�� ����NJ������OE�� ����NJ������OE��
SPECIFICATIONS
While general information, pictures, and descriptions are provided, some illustrations and text may include
product options and accessories NOT AVAILABLE in all regions, and in some countries products and accessories
PD\�UHTXLUH�PRGL�FDWLRQV�RU�DGGLWLRQV�WR�HQVXUH�FRPSOLDQFH�ZLWK�WKH�ORFDO�UHJXODWLRQV�RI�WKRVH�FRXQWULHV�
Operating Dimensions 60G
1500-mm (4 ft. 11 in.) Standard Arm 1850-mm (6 ft. 1 in.) Long Arm
A Maximum Cutting Height �����P�����IW����LQ�� �����P�����IW����LQ��
B Maximum Dumping Height �����P�����IW����LQ�� �����P�����IW����LQ��
C Maximum Digging Depth �����P�����IW����LQ�� �����P�����IW����LQ��
D Maximum Digging Reach �����P�����IW����LQ�� �����P�����IW����LQ��
E 0LQLPXP�%RRP�6ZLQJ�5DGLXV �����P����IW����LQ�� �����P����IW����LQ���ZLWK�DGGLWLRQDO�FRXQWHUZHLJKW
F Transport Length �����P�����IW�����LQ�� �����P�����IW����LQ��
'LJJLQJ�)RUFH��,62���+&0�%XFNHW��������PP�>���LQ�@�WLS�UDGLXV�
Arm �����N1��������OE�� �����N1��������OE��
%XFNHW �����N1��������OE�� �����N1��������OE��
Machine Dimensions
G Upperstructure Width �����P����IW����LQ��
H 2YHUDOO�+HLJKW��FDQRS\�RU�FDE� �����P����IW����LQ��
I 7UDFN�:LGWK ����PP�����LQ��
J Undercarriage Width �����P����IW����LQ��
K Ground Clearance ����PP�����LQ��
L 7DLO�6ZLQJ�5DGLXV
:LWK�6WDQGDUG�&RXQWHUZHLJKW �����P����IW����LQ��
:LWK�$GGLWLRQDO�&RXQWHUZHLJKW �����P����IW����LQ��
M Engine Cover Height �����P����IW����LQ��
G
H
I
J
L
M
N
O
PQ
R
K
Lift Capacities
Boldface type LQGLFDWHV�K\GUDXOLFDOO\�OLPLWHG�FDSDFLW\��OLJKWIDFH�W\SH�LQGLFDWHV�VWDELOLW\�OLPLWHG�FDSDFLWLHV��LQ�NJ��OE����$OO�OLIW�FDSDFLWLHV�DUH�EDVHG�RQ�,62��������ZLWK�SRZHU�ERRVW���/LIWLQJ�PHDVXUHPHQW�IURP�FHQWHU�RI�DUP�WR�EXFNHW�SLQ��ZLWK�����PP�����LQ���WUDFN�VKRH�DQG�EODGH�RQ�JURXQG��DQG�VLWXDWHG�RQ��UP��OHYHO��XQLIRUP�VXSSRUWLQJ�VXUIDFH�7RWDO�ORDG�LQFOXGHV�ZHLJKW�RI�FDEOHV��KRRN��HWF��)LJXUHV�GR�QRW�H[FHHG����SHUFHQW�RI�K\GUDXOLF�FDSDFLWLHV�RU����SHUFHQW�RI�ZHLJKW�QHHGHG�WR�WLS�PDFKLQH�
Rubber Track and Standard Counterweight
Steel Track and Standard Counterweight
Rubber Track and Extra Counterweight
Steel Track and Extra Counterweight
Ground Level at 3.0-m (9 ft. 10 in.) Radius Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
�����PP����IW�����LQ���6WDQGDUG�$UP�DQG�&DE 3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
�����PP����IW����LQ���/RQJ�$UP�DQG�&DE 3810 kg (8,400 lb.)
�����NJ ������OE��
3810 kg (8,400 lb.)
�����NJ �������OE��
3810 kg (8,400 lb.)
�����NJ �������OE��
3810 kg (8,400 lb.)
�����NJ �������OE��
�����PP����IW�����LQ���6WDQGDUG�$UP�DQG�&DQRS\ 3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
3880 kg (8,550 lb.)
�����NJ �������OE��
�����PP����IW����LQ���/RQJ�$UP�DQG�&DQRS\ 3820 kg (8,420 lb.)
�����NJ �������OE��
3820 kg (8,420 lb.)
�����NJ �������OE��
3820 kg (8,420 lb.)
�����NJ �������OE��
3820 kg (8,420 lb.)
�����NJ �������OE��
E
A
B
F
D
C
SPECIFICATIONS
N 0D[LPXP�%ODGH�/LIW�$ERYH�*URXQG ����PP�����LQ��
O 0D[LPXP�%ODGH�'URS�%HORZ�*URXQG ����PP�����LQ��
Blade
Width �����P����IW����LQ��
Height ����PP�����LQ��
P 6SURFNHW�&HQWHU�WR�,GOHU�&HQWHU �����P����IW����LQ��
Q Undercarriage Length �����P����IW����LQ��
R &RXQWHUZHLJKW�&OHDUDQFH ����PP�����LQ��
JohnDeere.com
Key: � Standard � Optional or special See your John Deere dealer for further information.
Additional equipment
While general information, pictures, and descriptions are provided, some illustrations and text may include product options DQG�DFFHVVRULHV�127�$9$,/$%/(�LQ�DOO�UHJLRQV��DQG�LQ�VRPH�FRXQWULHV�SURGXFWV�DQG�DFFHVVRULHV�PD\�UHTXLUH�PRGL�FDWLRQV
or additions to ensure compliance with the local regulations of those countries.Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions per ISO 9249.
7KHVH�PDFKLQHV�DUH�QRW�HTXLSSHG�ZLWK�VSDUN�DUUHVWRU�PXI�HUV��8VDJH�LQ�IRUHVWU\�DSSOLFDWLRQV�LV�QRW�UHFRPPHQGHG��6SHFL�FDWLRQV�DQG�GHVLJQ�VXEMHFW WR�FKDQJH�ZLWKRXW�QRWLFH��:KHUHYHU�DSSOLFDEOH��VSHFL�FDWLRQV�DUH�LQ�DFFRUGDQFH�ZLWK�6$(�VWDQGDUGV��([FHSW�ZKHUH�RWKHUZLVH�QRWHG��WKHVH�VSHFL�FDWLRQV�DUH�EDVHG�RQ�XQLWV�ZLWK�VWDQGDUG�DUPV��IXOO�IXHO�WDQNV��DQG����NJ������OE���RSHUDWRUV��D���*�FDQRS\�XQLW�ZLWK�����PP�����LQ���������P�������FX��IW���EXFNHW������PP�����LQ���UXEEHU�WUDFN��DQG�����NJ��������OE���FRXQWHUZHLJKW��D���*�FDQRS\�XQLW�ZLWK�����PP�����LQ���������P�������FX��IW���EXFNHW������PP�����LQ���UXEEHU�WUDFN��DQG�����NJ��������OE���FRXQWHUZHLJKW��DQG�D���*�FDE�XQLW�ZLWK������P�������FX��IW���EXFNHW������PP�����LQ���UXEEHU�WUDFN��DQG�����NJ
�������OE���FRXQWHUZHLJKW�
35G 50G 60G Engine
� � � Meets EPA Final Tier 4/EU Stage IV
emissions
� � � Auto shutdown
� � � Engine coolant to –37 deg. C
(–34 deg. F)
� � � Engine preheater
� � � Fan guard
� � � Fuel/water separator
� � � )XOO��RZ�RLO��OWHU
� � � Isolation mounted
� � � Key start switch with electric fuel
shutoff
� � � 6LQJOH�GU\�W\SH�DLU��OWHU
Hydraulic System
� � � Auto-idle
� � � Auxiliary function right-hand
pilot-lever control
� � � Auxiliary hydraulic lines with
quick-couplers to end of boom
� � � $X[LOLDU\�UHWXUQ��RZ�VHOHFWRU�YDOYH
� � � Axial-piston swing motor
� � � Boom-swing foot control
� � � Excavator-to-backhoe control
pattern change valve
� Open center with 2 variable-
GLVSODFHPHQW�SXPSV�DQG����[HG� gear pump
� � Closed center load sensing with
1 variable-displacement pump
� � � Hydraulic pilot-operated controls
for boom, arm, bucket, swing,
boom swing, blade, travel, and
auxiliary functions
� � � Wet-disc swing brake
Undercarriage
� � � 3ODQHWDU\��QDO�GULYH
� � � Propel motor shield
� � � 2-speed axial-piston propel motors
� Rubber track, 300 mm (12 in.)
� � Rubber track, 400 mm (16 in.)
35G 50G 60G Undercarriage (continued)
� Steel track, 300 mm (12 in.) with
triple semi-grousers
� � Steel track, 400 mm (16 in.) with
triple semi-grousers
� Rubber crawler pad, 300 mm (12 in.)
� � Rubber crawler pad, 400 mm (16 in.)
Upperstructure
� � � 360-deg. rotation
� Counterweight, 540 kg (1,190 lb.)
� Counterweight, 700 kg (1,543 lb.)
� Counterweight, 745 kg (1,642 lb.)
� � � Hinged service-access doors
� � Toolbox
� � � ROPS/TOPS/FOPS (canopy)
� � � ROPS/TOPS/FOPS (cab) with air
conditioning and heater
� � � Vandal protection for service doors,
fuel cap, and toolbox
� � =HUR�WDLO�VZLQJ�FRQ�JXUDWLRQ
� 5HGXFHG�WDLO�VZLQJ�FRQ�JXUDWLRQ
Front Attachments
� Arm, 1315 mm (4 ft. 4 in.)
� Arm, 1380 mm (4 ft. 6 in.)
� Arm, 1500 mm (4 ft. 11 in.)
� Long arm, 1715 mm (5 ft. 8 in.),
includes additional 240-kg (529 lb.)
counterweight
� Long arm, 1690 mm (5 ft. 7 in.),
includes additional 200-kg (441 lb.)
counterweight
� Long arm, 1850 mm (6 ft. 1 in.),
includes additional 270-kg (595 lb.)
counterweight
� � � Articulation hose shield
� %DFN�OO�EODGH�������P����IW����LQ��
� � %DFN�OO�EODGH�������P����IW����LQ��
� � � +\GUDXOLF�DQJOH�EDFN�OO�EODGH
� Boom, 2.465 m (8 ft. 1 in.)
� Boom, 2.85 m (9 ft. 4.2 in.)
� Boom, 2.965 m (9 ft. 9 in.)
� � � Mechanical quick-coupler
35G 50G 60G Front Attachments (continued)
� � � Augers: Planetary / Chain drive /
Bits / Bit adapters
� � � Clamp
� � � Hammers: Points / Tools
� � � Quick-coupler buckets: Bucket teeth /
Ditching / Heavy-duty
Operator’s Station
� � � Horn
� � � Hour meter
� � � Instrumentation lights
� � � Mode selectors (illuminated):
Power mode (1) / Economy mode (1)
� � � Monitor system: Preheat indicator /
Engine oil pressure indicator with
alarm / Alternator voltage indicator /
Fuel gauge and low-fuel-level indi-
cator / Engine coolant temperature
gauge and engine coolant temper-
ature indicator with alarm / Hour
meter / Work lights indicator
� � � Motion alarm with cancel switch
� � � Work lights switch
� � � Propel levers and foldable pedals
� � � 2 travel speeds with automatic
shifting
� � � Seat belt, 51 mm (2 in.), retractable
� � � Seat belt, 76 mm (3 in.), retractable
� � � Vinyl seat with fore/aft adjustment
� � � Suspension seat (cloth)
� � � Front screen
� � � Rear secondary exit kit
Electrical
� � � 12-volt accessory outlet
� � � Alternator, 55 amp
� � � Low-maintenance battery
� � � Blade-type multi-fused circuits
� � � Positive-terminal battery covers
Lights
� � � Work lights: Halogen / 1 mounted
on operator’s station / 1 mounted
on boom
DKAXGCCE Litho in U.S.A. (20-06)