G) Recycling and waste treatment - Minister of Economy ... · G) Recycling and waste treatment No....

G) Recycling and waste treatment

No. G-1 Act Co., Ltd. CEO Akihisa OKUDA

Category Recycling and waste treatment Keyword Sludge treatment, dehydration

Product/ser

vice name

Applicable

field

Address 2-3 Nishiyashiki, Miyaushiro-cho, Konan City, Aichi 483-8044, Japan

CEO Akihisa OKUDA [email protected]

http://www.act2002.co.jp Tel: +81-587-51-2655 Fax:+81-587-51-2656

No. G-2 AKECHI CERAMICS Co., Ltd. President Nobutaka USHIGOME

Category Keyword

Product/ser

vice name

Applicable

field

Address 1614 Akechi-cho, Ena City, Gifu 509-7795, Japan

General Manager Toshiyuki　MUROI [email protected]

Tel: +81-573-54-2105 Fax: +81-573-54-2126

Ash melting furnace, heat resistance material

Description

of business

Producing of heat resistance materials mainly made of graphite for continuous casting at ironworks, graphite bricks,

graphite crucibles for melting nonferrous metals, and antibacterial agents

Dehydration Plant Process Flowchart

Contact

Appeal

point

Since the system is not based on thermal dehydration, it is not necessary

to burn a fossil fuel to produce a massive amount of heat energy.

Therefore, the system reduces fuel expense and cuts down the cost of

dehydration itself. Dehydration without dissipating heat reduces the

occurrence of unpleasant odors and eliminates the emission of

greenhouse effect gasses. Low-cost dehydration is realized.

Recycling and waste treatment

Fuel conversion dehydration plant for high-water content sludge organic residue

Organic material dehydration plant Product picture, flow diagram, etc.

Description

of business

Our dehydration technology reduces moisture content from 70% to 20%

in a short time with the effect of a dehydration accelerant and function of

an air blowing system with little use of heat energy.

The organic materials dehydrated to 20% can be used as solid fuel

generating a caloric value of approximately 4,500 kcal/kg.

Product

features/

character

istics

Designing ash melting furnace bodies and supplying heat

resistance materialsProduct picture, flow diagram, etc.

Product

features/

character

istics

Focusing on the superior characteristics such as metal slag resistance of

graphite bricks, which make use of the technology developed for furnace

bottom and basin heat-resistant bricks of a blast furnaces at ironworks,

we design the bodies of melting furnaces that are used to reduce the

volume of garbage incineration ash, fly ash, and industrial wastes in the

field of environmental conservation, and supply heat resistance materials

for these applications.

(1) Materials superior in slag resistance and wear resistance

(2) Materials stable against thermal load and thermal history

(3) High-precision bricks adherence to the body design of a blast furnace,

reducing furnace construction period

Temporary Laying of Graphite Bricks

Contacthttp://www.tyk.co.jp/01CompanyInfo/cont05.html

Electric resistance type plasma ash melting furnaces (capacity: 12 to 72 tons/day): 19 units

Appeal

point

- Large graphite bricks (max. size: 2,500 mm) can be manufactured.

- High-precision and superior cooling capacity realize long-life durable

products.

★ Detailed Information Available 32


No. G-3 ★ President

Category Keyword

Product/ser

vice name

Applicable

field

Address 14-24 Showa-cho, Minato-ku, Nagoya City, Aichi 455-0026, Japan

Managing Director Minoru KANETA [email protected]

http://www.arbiz.co.jp/ Tel：+81-52-619-6600

No. G-4 ARMEC CO., LTD. CEO Hideki HOSHIKAWA

Category Keyword

Product/ser

vice name

Applicable

field

Address 143 Toyama, Kitasaki-cho, Obu City, Aichi 474-0001, Japan

Obu Plant Plant Manager

http://armec.jp/ Tel: +81-562-44-1159 Fax: +81-562-44-3789

Contact

Appeal

point

Based on Aichi Prefecture, we have been mainly working on recycling

resources including metals and treating industrial wastes for more than

50 years. Under a motto of "Revitalization Factory," we contribute to

environmental preservation through resource recycling.


Description

of business

Recycling and reusing iron, nonferrous metals, and resin, collecting, transporting, disposing, and recycling industrial

wastes. Contractor of ordinary license

Product

features/

character

istics

Description

of business

Target of processing and recycling: Discarded automobiles, industrial wastes, discarded electric appliances for business uses,

metal scraps (steel-making materials, forging materials, special steel scraps, non-ferrous metals), OA and office appliances, circuit

boards, demolishing of plants, used papers, waste plastics, sales of used cars (in Japan and overseas), recycling of small home

appliances

Resource recycling Product picture, flow diagram, etc.

Industrial waste processing Product picture, flow diagram, etc.

Products sold to: Steel manufacturers (steel-making materials), paper manufacturers (RPF), non-ferrous metal

manufacturers, export, etc.

Crushing, processing, and recycling

Product

features/

character

istics

Compressing, press-packing, crush-and-press-molding, crushing and

sorting.

In compliance with the excellent standard as an industrial waste

collection and transport business and disposal business.

Certified with ISO14001 and ISO27001

• Automobile: Reuse at overseas, resource recycling, reuse in Japan,

sales of parts

• Metal: Scrap recycling, non-ferrous metal + rare metal recycling

• Plastic: Material, RPF (solid fuel), thermal recycling

• Production of steel-making byproduct by effectively using automobile

shredder dust (ASR)

All-weather recycling plant in a large site

We recycle metal and resin scrap generating during demolition and

disposal of buildings and plants, and during manufacturing, discarded

from hardware stores, supermarkets, and retail stores. The scrap is

sorted, decomposed, cut, crushed, and processed into forms that can be

delivered to steel mills and smelting and refinig mills.

We have established a mechanism and system for adjusting components

and quality of materials according to the requirements by each customer,

and prevent drain of collected materials.

The entire company is working hard to enhance the convenience of the

customers.

Appeal

point

Crushing using large shredders. We are good at recycling difficult-to-process

composite materials by repeating sorting after crushing (magnetic sorting, wind-

power sorting, non-ferrous sorting, heavy liquid sorting, and sorting by specific

weight). We obtained patent for the production of iron and steel byproducts using

shredder dusts. Our Production Technology Department is in charge of the

process from plant design to the production.

Production of iron and steel auxiliary

materials, using shredder dusts

Contact

ARBIZ Corporation Dai SETA


Fax：+81-52-619-6601

Management Department

Automobile, metal, plastic, waste paper

[email protected], [email protected] HOSHIKAWA

High-Performance Nugget Machine

(Breaker/Crusher)

Retailers, construction companies, and automobile component manufacturers

33 ★ Detailed Information Available


No. G-5 BENIKYU Co., Ltd. CEO Keigo MIURA

Category Keyword

Product/ser

vice name

Applicable

field

Address 18 Hananaka-cho, Toyohashi City, Aichi 441-8032, Japan

CEO Keigo MIURA [email protected]

http://www.benikyu.com Tel: +81-532-31-1304 Fax: +81-532-31-7284


Category Keyword

Product/ser

vice name

Applicable

field

Address 3-37-3 Suyamacho, Mizuho-ku, Nagoya City, Aichi 467-0066, Japan

President Koji KINUGUSA

http://chubueen.com/ Tel：+81-52-848-9371

Contact

Recycling and waste treatment Metal scraps, recycling

Description

of business

Collection and purchase of metal scraps including iron scraps/non-ferrous metal scraps (copper/aluminum/stainless

scraps), building demolition, facilities removal, other materials recycling

Product

features/

character

istics

BENIKYU is a total recycling company, providing the following services.

- Collection of metal scraps

- Processing including sorting, compression and cutting

- Purchase/ sale of iron scraps

- Purchase/ sale of non-ferrous scraps

- Transport/ removal of machinery equipment

- Building demolition

- Automobile dismantlement

- Rare metal collection from small-size electrical appliances and

electronic devices

Cutting process

Appeal

point

- Collection of metal scraps

- Processing including sorting, compression and cutting

- Purchase/ sale of metal materials including iron, non-ferrous metals

Steel manufacturers, non-ferrous metal manufacturers

Recycling system EE21 Product picture, flow diagram, etc.

Product

features/

character

istics

This system performs pyrolysis of organic wastes in an anoxic condition

and turns them into ultra-fine new carbon.

• Small to large systems can be freely combined, but the operation of

multiple units is required.

• Use of nitrogen in the air: The pyrolysis method in the atmosphere

reduces costs including the cost of materials and emits smaller amount of

CO2 due to the use of electric furnace.

• Operators need less special knowledge compared to general

incinerators. The facility size is small and requires small spaces for

installation.

• Radioactive materials can be flocculated into carbon.

Description

of business

Digital image processing and analysis, infrared measurement, planning, design, sales, and management of

biomass plant system, sales of environmental instrument systems, comparison and facility planning of tunnel

construction methods and soil improvement methods, and other operations (omitted)

[email protected]

Central Earth Environmetal Network Co., Ltd. Koji KINUGUSA

Appeal

point

The new carbon produced by EE21 has the following characteristics: [1] ultra-fine particles: 34 million

particle/cc; [2] nonconductive; [3] heat conductive (4.7 K or more); [4] close to the black body in endothermic

(heat radiation) measurement, and [5] can be molded into ultra-fine graphite (2 to 100 nanometers) through

special processing. The Australian government granted a substance patent to this material (atomic carbon) in

August 2011.

*Ministry of the Environment assessed this material in the 2014 Decontamination Technology Demonstration

Experiment. (implemented by Nihon Plant Kensetsu Corporation)

For detail: https://www.nustec.or.jp/etc/josen.html

Metal recycling company in Okinawa RPF Carbonization facility 50 to 100 t to be processed per day

Fax：+81-52-848-9391

Processing and recycling of metal scraps Product picture, flow diagram, etc.

Recycling and waste treatment Pyrolysis, material recycling



No. G-7 CHUKOH SEIKI CO., LTD. President Yoshikatsu KUDO

Category Keyword

Product/ser

vice name

Applicable

field

Address 5177-7 Sotoda, Hiyoshi-cho, Mizunami-city, Gifu 509-6251, Japan

General Affairs Department Directer Yuu MIURA [email protected]

http://www.chukoh-seiki.com/ Tel: +81-572-69-1025 Fax: +81-572-69-1027

No. G-8 ★ Daiseki Co., Ltd. President Hideki HASHIRA

Category Keyword

Product/ser

vice name

Applicable

field

Address 1-86 Funami-cho, Minato-ku, Nagoya City, Aichi 455-8505, Japan

[email protected]

http://www.daiseki.co.jp/ Tel: +81-52-611-6322 Fax: +81-52-611-0161

Recycling and waste treatment Grinder, recycling, garbage combustion, waste glass

Roller mill (Wet Pan) Product picture, flow diagram, etc.

Description

of business

Crushing machines manufacturing (coarse, fine, ceramic materials refining and recycling), filtering devices-

compressors, conveyors, deferrization equipment, ceramics material refining machines, waste water treatment

devices

Industrial waste recycling Product picture, flow diagram, etc.

Product

features/

character

istics

Waste oil (mineral oil, animal & plant fats, etc.) into recycled fuel

Waste liquid containing metal for metal material recovery

Sludge from plants and construction sites into cement material

Designated controlled industrial wastes (waste acid, alkalines, oils, etc.)

Others (various waste plastics, soot, slag, incinerated ash, etc.)

Various types of industrial waste is recycled and supplied to the

industrial sector as products.

Contribution in 70,000 cases nationwide (industrial waste treatment service contracts)

Contact

Contact

Recycling and waste treatment Industrial waste treatment, material recycling

Description

of business

Industrial waste processing, material recycling, environmental analysis & maintenance, construction business &

remediation of contaminated soil

Vice President Tetsuya YAMAMOTO

Waste oil processing & recycling flow

Product

features/

character

istics

The product grinds the materials with an action of compressive force by

roller weight, shearing force, friction force caused between ground

materials, and twisting force.

Appeal

pointApplicable to various range of input materials due to simple structure.

Roller Mill (Wet Pan)

This product recycles cake of ash generated in incinerator by grinding to make bricks, blocks, aggregate etc.

Appeal

point

(1) Broad range of coverage extending to all manufacturing industries

(2) Promotion of effective material use, recognizing industrial waste as

domestic materials resource

(3) Contribution to carbon dioxide reduction through recycling into fuels

analysis &separation

recycle to lubricant recycle to heavy oil reuse as auxiliary

refining blending &

adjustmentabsorption of

impurities by clay treatment

filtration centrifugal separation

product test

dewartering and

sludge

product shipmentproduct delivery product shipment



No. G-9 President

Category Keyword

Product/ser

vice name

Applicable

field

Address Nagoya Fushimi Square Building, 1-13-26 Nishiki, Nakaku, Nagoya City, Aichi 460-0003, Japan

Geotech Department, Nagoya Office Director KOIZUMI

http://www.dowa-eco.co.jp/ Tel：+81-52-232-4137


Category Keyword

Product/ser

vice name

Applicable

field

Address 2-2 Kuratsuki, Kanazawa City, Ishikawa 920-8203, Japan

Sales Engineering Group Susumu TANAKA

http://www.earth-eec.co.jp Tel：+81-76-268-6424

Description

of business

Environmental and recycling business: Resource recycling, waste disposal, soil purification, environmental

consultation service, etc.

Recycling and waste treatment Metal resource recovery, precious metals

DOWA ECO-SYSTEM Co., Ltd. Nagoya Office

Description

of business

Design, manufacturing, sales, and maintenance work in general of small RPF solid fuel production system using non-industrial and

industrial wastes

Production and sales of biomass (wooden) pellet production systems, water purification system, and ceramic foam.

Disposal of small amount of PCB, purification of

contaminated soil, and metal recyclingProduct picture, flow diagram, etc.

Product

features/

character

istics

• The advanced technology to recycle as many as 17 types of metals

including gold and silver based on the ore dressing and smelting

technologies accumulated as a metallurgy business. We can currently

recycle as many as 22 types of elements based on this technology.

• In compliance with the Law Concerning Recycling Measures of End-of-

life Vehicles: We collect valuable metals and steam.

Recycling furnace

Appeal

point

The collected metal resources are turned into products including

accessories, electronic substrates, films, and electric wires and returned

to the society.

Contact

Recycling and waste treatment Wooden, biomass, waste, fuel, solid, compact, device

RPF production system and pellet production system Product picture, flow diagram, etc.

Product

features/

character

istics

We form combustible materials and wastes into valuable solid fuels and

pellets.

We also form agricultural materials such as compost into easy-to-handle

pellets or other shapes.

We can produce pellets from various materials using flat-dice method.

• For the case of RPF production system

　Example 1: Waste plastic + Used papers → RPF

• For the case of biomass pellet production system

　Example 2: Wood scraps → Wooden pellet

　Example 3: Compost → Compost pellet

Appeal

point

In addition to wood scraps, we can produce pellets from various materials such as

compost and rice husks. We can produce pellets in special shapes to respond to

requests of standard customers. Options: material feeders, water feeders, heater,

and sieving machines.

Safety systems and automatic continuous control are also standard functions for

the safe and easy operation of the system.

About 160 units

Contact

Earth Engineering Corporation Kazuya ONISHI

[email protected]

Fax：+81-76-266-8255

Kenichi SASAKI

[email protected]

Fax：+81-52-205-5037



No. G-11 ECOTEC Inc. President Yoshitaka UCHIDA

Category Keyword

Product/ser

vice name

Applicable

field

Address 141-69 Hikitsukuri, Mihama-cho, Minamimuro-gun, Mie 519-5205, Japan

Administrative Dept. Assistant Manager Yoshitaka MINAMI [email protected]

http://www.ecotec-jp.com/ Tel: +81-5979-2-0121 Fax: +81-5979-2-0199

No. G-12 Fujii Kakou Co., Ltd. President Tatsuo FUJII

Category Keyword

Product/ser

vice name

Applicable

field

Address 15-1 Minamiyochi, Higashibata-cho, Anjo City, Aichi 444-1213, Japan

Executive Director Kiyomitsu FUJII [email protected]

http://fujii-kakou.co.jp/ Tel: +81-566-92-4100 Fax: +81-566-92-4594

Description

of businessTreatment, collection, conveyance, thermal recycling of waste tatami

Plastic recycling & coloring Product picture, flow diagram, etc.

Description

of businessPlastic recycling and coloring, recycled raw material sales, recycled material development & analysis

Treatment of waste tatami Product picture, flow diagram, etc.

Product

features/

character

istics

We break rice straws, the material of waste tatami, into pieces to make

solid fuel.

Treatment capacity: approx. 400t (approx. 40,000 tatami) / month

Sales routes of fertilizer: Paper manufacturers, iron industry, gardening

material distributors, seedling manufacturers, gardening shops,

landscape gardening/construction engineering business, agriculture

Appeal

point

- Top-class company specified in waste tatami treatment.

- This is the first project authorized as "Renewable resource composting

facility promotion project" from Ministry of Economy, Trade and Industry,

Ministry of Agriculture, Forestry and Fisheries, and Ministry of Health,

Labor and Welfare.

Public works, paper manufacturers, stock farms

Contact

Recycling and waste treatment Plastics, recycling & processing

Product

features/

character

istics

Recycled resin processing & sales: Damaged molded plastic goods are

collected and ground at the plant, sorted into designated colors for

pelletization, inspection, packaging, sales and shipment.

Also, the company owns physical property test equipment for

compounding to meet customer needs in physical property.

Appeal

point

We are cooperating in the reduction of cost and waste output through

palletizing and purchase of resin from customers.

Automobile parts industry, construction parts industry, sundry goods industry

Contact

Recycling and waste treatment Recycling, composting, solid fuel production

Before compounding After

in customer's plant in Fujii Kakou



No. G-13 ★ Goh Iron Works Co., Ltd. President Shizuka KANO

Category Keyword

Product/ser

vice name

Applicable

field

Address 58-2 Osa, Tarui-cho, Fuwa-gun, Gifu 503-2122, Japan

Section chief Yuji TSUBO [email protected]

http://www.gohiron.co.jp/ Tel: +81-584-22-1120 Fax: +81-584-22-2038

No. G-14 Green Arrows Central Co., Ltd. President Hiroya YAMAMOTO

Category Keyword

Product/ser

vice name

Applicable

field

Address 213-7 Honowari, Minami Shibata-machi, Tokai City, Aichi 476-0001, Japan

Kikuo TOMITA [email protected]

http://www.daiseki-eco.co.jp/gac/ Tel: +81-52-689-3501 Fax: +81-52-604-1558

Delivery of Soil Improvement Material: Construction of commercial facilities (private) and land reallocation (public),

etc.

Lining Tank Department

Technology Development Section General ManagerContact

Manufacturing soil improvement materials using recycled resources

as principal raw materialsProduct picture, flow diagram, etc.

Product

features/

character

istics

- Process: Collecting/receiving waste plaster boards, hand screening

(removing metal and wood pieces), crashing, magnetic screening, sifting

paper from plaster powder, and recycling both of them.

- We also sell soil improvement materials made from the recycled plaster

powder. We can produce custom-made products according to the needs

of customers. Since recycled resources such as recycled plaster powder

and slag are used as main raw materials, our products contribute to the

promotion of a recycle-oriented society.

Recycling (Waste Plaster Boards)Appeal

point

Description

of businessRecycling waste plaster boards every step from collecting, intermediate-processing, and delivering to clients

Recycling and waste treatment Crushing equipment, environmental plant manufacturing

Contact

Product

features/

character

istics

In-house production of fluororesin (PTFE、PFA) sheet lining for tanks.

Being possible to manufacture large-size tanks more than 60m3; having

experience up to 100m3

size tank.

The lining sheet can be manufactured in the thickness 4mm; effective for

higher chemical resistance and corrosion resistance. It is one of our

product features to improve the ordinary PTFE into PLP sheet, in

enhancing chemical resistance, non-viscous and purity.

Appeal

point

For liquid storage tanks of waste liquids and the like, conventional steel

tanks can not store unspecified waste liquid because of their insufficient

corrosion resistance. However, lining with fluororesin sheet will make

such storage possible. The fluororesin lining tanks are also used for

removing emission gas. Being widely adopted by waste liquid collection/

recycling industry and chemical industry.

Description

of business

Industrial machinery, plant equipment, infrastructure equipment, lining application with fluororesin, R&D, industrial

waste treatment, golf course management, and metal processing and assembly

Fluororesin lining tank Product picture, flow diagram, etc.

More than 1,000 delivery records to mainly chemical industry; and medical, food, power and recycling industry.

Uses of Soil Improvement Material: Construction sites (soil solidification)

and Waste intermediate-treatment plants (sludge modifying)

One of the largest treatment plant in Japan dedicated for waste plaster

boards

Recycling and waste treatment Waste plaster board



No. G-15 Hakusekikan Co., Ltd. President Tetsuomi IWAMOTO

Category Keyword

Product/ser

vice name

Applicable

field

Address 5263-9 Hirukawa, Nakatsugawa City, Gifu 509-8301, Japan

President [email protected]

http://iwamoto-stone.com/ Tel: +81-573-45-3003 Fax: +81-573-45-2027


Category Keyword

Product/ser

vice name

Applicable

field

Address 3-2-26 Shirakane, Showa-ku, Nagoya, Aichi 466-0058, Japan

President Toshihiro IHARA

http://ihara.co.jp/index.html Tel： +81-52-882-1838 Fax：+81-52-883-3461

[email protected]

Recycling and waste treatment Carbonization, waste disposal, soil amendment, absorbent, exhaust heat usage

Mineral charcoal producing equipment "Super Stone Clean 530" and

"Super Stone Clean Z"Product picture, flow diagram, etc.

Description

of business

Environment-related devices (mineral charcoal producing equipment, research on raising animals and plants with

minerals, and charcoal absorbing chemical substances, and final waste disposal)

Description

of businessMaterial recycling of plastics with advanced functions

Product

features/

character

istics

Super Stone Clean 530 carbonizes plant residue such as rice hulls and

thinned wood to produce animal and plant raising materials, soil

amendments, and chemical substance absorbents.

The equipment can create hot water with its exhaust heat, which reduces

the consumption of fossil fuel.

One ton of charcoal fixes 3.7 tons of CO2.

Super Stone Clean Z turns organic substances into ash reducing the

volume to 1/100 to 1/3,000 with little use of fossil fuel.

Super Stone Clean 530:

Converting organic

substances into

charcoal, which

can be used for raising

fish and reviving plants,

absorbing cesium, and

exhaust heat generating hot water

　　　　　　　　　　　 Super Stone Clean Z:

　　　　　　　　　　　 Reducing the volume of

organic substances to

1/100 to 1/3,000

without using fossil fuelAppeal

point

Super Stone Clean 530 turns disposed organic substances into valuables. The created

charcoal can be processed into products for plant cultivation and chemical absorption. Its

exhaust heat generates hot water. Installing a heat pump provides air conditioning.

This equipment enables a recycling society with "local production for local consumption."

Aichi Pref., Gifu Pref., Tenryu-mura (Nagano Pref.), Kesennuma-shi (Miyagi Pref.), and Shizuoka Pref.

Contact

Recycling and waste treatment Resin recycling, material recycling

Tetsuomi IWAMOTO

Ihara Synthesis, Inc. Toshihiro IHARA

Plastic recycling Product picture, flow diagram, etc.

Product

features/

character

istics

We have been working on material recycling multi-purpose resin and

resins with advanced functions for 40 years since the establishment of

this company. Compared to multi-purpose resins, resins with advanced

functions often contain fillers and metals. These materials often caused

wearing in machines and required manual works. Cost reduction was

therefore difficult. We tried to solve this problem and successfully

reduced the cost by reevaluating materials of mechanical equipment and

automating them. We are causing innovation to recycling technologies by

cooperating with research facilities to improve the quality of recycled

materials at the same time.

Appeal

point

We improved the physical property and fire-resistance of recycled

materials. We are also researching on technologies to recycle hardening

resins.

Innovation to recycling technology.

Automobile component manufacturer, household appliance manufacturer, office equipment manufacturer

Contact

Virgin pellet

Storage and management

Powder Recycled pellet



No. G-17 ITOJU Co., Ltd. President Yasunori ITO

Category Keyword

Product/ser

vice name

Applicable

field

Address 1-3 Kawaramachi, Yokkaichi City, Mie 510-0033, Japan

President Yasunori ITO

http://www.ito-jyu.co.jp/ Tel: +81-59-331-3252 Fax: +81-59-333-3013

No. G-18 JFE Material Co., Ltd. President Masaru WASHIO

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-9-38 Shosei-machi, Imizu City, Toyama 934-8550, Japan

Syuichi UESAKA [email protected]

http://jfe-material.jp/ Tel: +81-766-84-4494 Fax: +81-766-84-4037

General Administration Dept. Deputy section chief

Description

of businessSteelmaking/foundry/plastic materials processing and sales, total waste management

Recycling and waste treatment Industrial waste, all items, uniform management

Description

of businessMetal refining and industrial waste recycling with electrical furnace

Offering one-stop services to emission traders Product picture, flow diagram, etc.

Product

features/

character

istics

- We handle metal, plastic, electronic substrate, valuables and industrial

waste (including specially-controlled waste).

- We have collection/transport permit in the Chubu area and a wide-area

transport network.

- We offer comprehensive recyclable logistics using various recycling

facilities and treatment plants.

Appeal

point

Offering uniform management to support our customers' waste control

(matching services for waste treatment and recycling, preparation of a

recycling report, development of management manual, etc.).

Major electronics business, leading image & solution industry, major ICT industry

[email protected], [email protected]

Recycling and waste treatment Super-high temperature, electrical furnace, rare metal recovery

REM business: Recycling rare metals found in industrial

wasteProduct picture, flow diagram, etc.

Product

features/

character

istics

Disposable catalysts from refineries and ash, etc., from thermal power

stations are burned with heavy oil to manufacture incinerated metal ore

containing rare metals (molybdenum, nickel and vanadium).

Incinerated ore is melted and refined to manufacture ferrovanadium (FV)

and ferromolybdenum nickel (FMoNi) alloy.

Rare metal separation and recovery from

slag containing ferromolybdenum and

vanadium

Appeal

point

Slug produced as byproduct is reprocessed for sale as desulfurized

material used in steel refinery, etc.

Introduced in 2005. 　FV & FMoNi output: 3920 tons (FY 2011)

Contact

Use of goods

Obtained

Customers'

Treatment & recovery

Scrapping, collection,

transportation

Dissolution &

disposal

return valuables

reuserecycling

industrial



No. G-19 KAMEI SEITO Co., Ltd. President Hiroaki KAMEI

Category Keyword

Product/ser

vice name

Applicable

field

Address 1258 Kasahara-cho, Tajimi City, Aichi 507-0901, Japan

President Hiroaki KAMEI [email protected]

http://www.eco-angels.com Tel: +81-572-43-3511 Fax: +81-572-43-6815

No. G-20 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-4-8 Nagata, Kanazawa City, Ishikawa 920-0043, Japan

General Affairs Department Yukihito YAMAMOTO

http://www.tk-g.co.jp/ Tel：+81-76-223-4858

Kanazawa Hodo Co., Ltd. Takeo MUKAI

[email protected]

Public roads, theme parks, parking spaces, etc.

Description

of business

Manufacturing and wholesaling "Erthan Bricks" Earth-made bricks, collecting, transporting, and intermediate-

processing industrial wastes, importing and wholesaling stone, porcelain plates, gardening products, and

conducting global business on non-firing solidification technology

Recycling and waste treatment Recycled resource materials, non-firing solidification, brick

Fax：+81-76-263-6318

Description

of businessPavement construction; production and sales of asphalt mixtures and RC-40; industrial waste disposal work

"Erthan Bricks" Earth-Made Bricks Product picture, flow diagram, etc.

Product

features/

character

istics

Erthan Bricks are laying materials for pavements and gardens. The

antique brick-like material is produced from various unused resources

such as sewage sludge incinerated ash, water granulated slag (urban

garbage melted slag), mine spoil, ceramic spoil, china and porcelain

pieces, resin slime, waste plastic, foundry sand, and plastering waste,

using traditional pottery technique and newly developed special

solidification technology (patented process).

- Although non-fired, the bricks have pottery-like texture and a wide range

of colors with superior workability at low prices.

- They meet severe safety standards including physical properties such

as strength, skid resistance, and elution of toxic components.

Appeal

point

Made of 80% or more recycled materials using no fossil fuel causing

global warming, "Erthan Bricks," Earth-friendly eco bricks correspond to

the needs of the time.

We have delivered our products to 47 prefectures nation wide.

Contact

Recycling and waste treatment Incinerated sludge ash, asphalt mixture

Sewage sludge incineration and recycling plant and asphalt mixture

Rebuild As-ConProduct picture, flow diagram, etc.

Product

features/

character

istics

The incinerated ash of sewage sludge generated at sewage treatment

plants is processed at a recycled plant and recycled into filler, one of

materials of asphalt mixture (name: Rebuild As-Con).

• The heavy metal insoluble treatment technology stabilizes the product.

• The filler complies with environmental safety and quality standards.

Appeal

point

Sewage system administrator (governments), asphalt mixture production

plants.

Rebuild As-Con is a certified recycled product at Ishikawa Prefecture at

2000. This product has been re-certified since then. This product has

received many other prizes and awards.

Contact



No. G-21 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 128 Hachikencho, Handa City, Aichi 475-0807, Japan

Environmental Business Department Ayako AOYAMA

http://www.kanemiy.co.jp/ Tel：+81-56-923-2871

No. G-22 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 5-1 Momoyama Shiratoricho, Toyokawa City, Aichi 442-0847, Japan

President Kei TAKAHASHI

http://eco-techsys.com Tel：+81-53-387-5512

Kei TAKAHASHI

Fax：+81-53-395-5570

Sake manufacturer, soy sauce manufacturer, and other food production factories

On-site food waste disposal system Product picture, flow diagram, etc.

Description

of business

Development, design, production, and sales of waste plastic automatic washer, Bun-Sen®, wrapping material

automatic sorter, Bun-Bun®, and other environmental devices, and design and production of electronic components

and machine tool covers using CNC sheet metal (high-precision mechanical sheet metal)

KANEMIYA Co., LtdRecycling and waste treatment Waste plastic with residue, automatic washer, recycling, waste plastic recycling

Takao MASE

Description

of business

Food recycling: Production and sales of feed (eco-feed), production and sales organic fertilizers. Environmental

consulting. Environmental analysis, disposal of industrial and non-industrial wastes.

Waste plastic automatic washer Bun-Sen® Product picture, flow diagram, etc.

Product

features/

character

istics

This is a washer for waste plastics emitted from food processing factories

which used to be incinerated due to the adherence of food residue.

The removal of the adhered food residue enables material recycling.

　• The washed waste plastic can be sold.

　• A 45 liter bag is speed-washed and dehydrated in about 2 seconds.

　• This is a water-saving model and only consumes 20 liter/hour of water.

　• The installation space is small.

Waste plastic automatic washer Bun-Sen

Appeal

point

Food processing factories, industrial waste processing businesses, resin

recycling factories, etc.

Food manufacturers, beverage manufacturers, intermediate waste processing businesses, automobile

manufacturers, electric appliances manufacturers

Contact

Recycling and waste treatment Fertilizer production, on-site processing, composting

[email protected]

FAX：+81-56-923-2872

Kankyo-TechSys corporation

Product

features/

character

istics

We enable the reuse of food wastes as feed by preserving and

processing them at food factories.

Different types of food wastes are processed appropriately.

This system not only reduces the disposal cost but also improves the

hygiene.

Recycling work: Pineapple skin, lees, potato skins, Shochu lees, flour,

etc.

On-site treatment at the site of waste

emission

Appeal

point

On-site processing: Food wastes which decay quickly and used to be

difficult to turn into feed can be effectively used as the raw material of

feed by drying them and adding organic acid to them to improve the

preservability.

[email protected]



No. G-23 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-1 Minamichigiri, Toyokawa City, Aichi 442-0008, Japan

Managing director Tsuguhisa KOUNO

http://www.kayama-k.co.jp/ Tel：+81-53-389-0375

No. G-24 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 3374 Aza Taracho, Oaza Okusa, Komaki City, Aichi 485-0802, Japan

Project Planning Department Director Yohei KONDO

http://www.kondosetsubi.co.jp/ Tel：+81-56-879-3511

Kayama Kogyo Co., Ltd. Junichiro KAYAMA

[email protected]

Recycling and waste treatment Waste treatment, solid fuel (RPF) production

This product is for companies with large boilers such as paper

manufacturing plants.

Fax：+81-53-384-3739

Hisataka KONDO

Extrusion (production of solid fuel) (RPF) Product picture, flow diagram, etc.

Description

of business

Collection, transportation, disposal, and dismantlement of industrial wastes, industrial wastes requiring special

management, and non-industrial wastes

Product

features/

character

istics

We handle used papers and waste plastics which are considered difficult

wastes to be used in material recycling. We use them as main materials

and produce molded solid fuels after properly sorting and crushing

wooden scraps, paper scraps, and used tatami mats.

Uses include fuel for boilers.

　• The processing capacity of 3 t/h

Appeal

point

We offer an integrated service including the design, production, and

installation of boilers, pressure vessels, and industrial waste incinerators.

Specifically, we have started producing biomass boilers which would burn

on solid fuel made from wooden chips, paper scraps, and waste plastics

rather than conventional heavy oil before the name of biomass boiler

became known. We have also sold biomass power generators which

combined biomass boiler with power generator.

We accept orders for both design and production, or production only

upon request. This is a certified factory for producing boilers and

pressure vessels under the Electricity Business Act and the Industrial

Safety and Health Act.

Example of waste incinerators (in an

airport)Appeal

point

Our strengths are the attitude to respond to any questions of our

customers, the integrated system covering design, production,

installation, and follow-up maintenance, and the technologies we have

accumulated as a plant specialist since the foundation of the company.

We have especially many experiences in the design and production of

plants to match the needs of our customers.

Nine companies in the paper manufacturing industry, one cement company, two companies in the steel-making and

iron-steel industry, and one company in other field


KONDO PLANT ENGINEERING CO., LTD.Recycling and waste treatment Boiler, incinerator

Description

of business

Boilers and pressure vessels, dust collectors, storage silos, transportation equipment, incinerators, exhaust gas

treatment systems, recycled power generators, engineering (industrial waste incinerators, dryers, industrial kilns,

etc.)

Biomass boiler power generator Product picture, flow diagram, etc.

Product

features/

character

istics

Industrial waste disposal companies, companies with chemical plants, paper production companies, gypsum board production companies

ContactFax：+81-56-879-6810

Screening

No

n-

ch

lori

ne

Crusher Material feeder Compacting and extruding machine

RPF

Shipment

Uses include fuel for boilers.

OX Paper

manufacturer

Production process

The accepted waste plastics and

used papers are roughly sorted and molded and then made into products as RPF.

Wa

ste

p

las

tic

Pap

er

scra

p

Wo

od

scra

p



No. G-25 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 37-10 Shiomi-cho, Minato-ku, Nagoya City, Aichi 445-0028, Japan

Bio Plaza Nagoya Michiyo MURAHIRA [email protected]

http://www.kumasei.com/ Tel: +81-52-614-0539 Fax: +81-52-614-0515

No. G-26 Marc Corporation Co., Ltd. President Hiromitsu MUKAI

Category Keyword

Product/ser

vice name

Applicabl

e field

Address 531-1 Suzukida, Ifuna-cho, Suzuka City, Mie 519-0323, Japan

Administration Dept General Manager Kayo MATSUBARA [email protected]

http://www.mie-arc.or.jp/ Tel: +81-59-371-6330 Fax: +81-59-371-6660

KUMASEI Co., Ltd. Mitsusiro MURAHIRA

Director and Office manager

Recycling and waste treatment Garbage, composting, fertilizer production

Product

features/

character

istics

We have overcome important problems of fertilizer production from

kitchen garbage including sorting, deodorizing, and securing sales

channels.

In regards to the deodorizing technology, we are using a closed system

which does not release odor or contaminated water to the outside of a

plant to stay environmentally friendly.

The recycled product, the organic fertilizer named Green Supple

contributes to the development of recycle-oriented society and promotes

recycling businesses with recycled products of food wastes which

connect production farmers and consumers.

Description

of businessFood recycling (production of fertilizer)

Automobile recycling Product picture, flow diagram, etc.

Product

features/

character

istics

Descriptio

n of

business

Automobile recycling

Bio-plaza type kitchen garbage recycling system Product picture, flow diagram, etc.

Appeal

point

Emphasis: Green Supple, the recycled fertilizer, is certified as an organic

JAS material and being sold in and outside of Japan.

Companies in Tokai region, fertilizer companies in and outside of Japan

Contact

Recycling and waste treatment Automobile, metal recycling, used parts recycling

Proactive collection, appropriate dismantlement and recycling of used

automobiles.

- Recycling of iron/non-ferrous materials and rare metals

- Production/sale of recycled automobile parts

Showroom

Appeal

point

Awarded "National top 20: excellent total recycling business" by the 2010

TH Team (ASR recycling organization consisting of 9 automobile

manufacturers)

Contact

Purchase from automobile dealers, sale to trading firms and other companies

Recycling loop

To build sustainable andrecycling-oriented society

Collection

Food residue

Ruptured bag

Fermentation

Use of solar heat

Deodorization

Product

Organic fertilizer produced from food

residue: Green Supple

Shipment

Eco-farmer

JASpecialized businessTrading company

Agricultural producer


http://www.kumasei.com/#


No. G-27 MARUWA MACHINERY CO., LTD. President Toshinari　HAYASHI

Category Keyword

Product/ser

vice name

Applicable

field

Address 592-16 Kainazaki, Mizuhashi, Toyama City, Toyama 939-3552, Japan

Machinery Department ASAKURA [email protected]

http://www.maruwa-mcn.co.jp Tel: +81-76-478-5800 Fax: +81-76-478-3908

No. G-28 Matsukawa Yosaku Shoten Co.,Ltd President Tsutomu MATSUKAWA

Category Keyword

Product/ser

vice name

Applicable

field

Address 3-23 Asahigaoka, Hakusan City, Ishikawa 924-0004, Japan

Director [email protected]

Tel: +81-76-275-7755 Fax: +81-76-275-7877

Yoshiki MATSUKAWA

Fuel supply system, industrial machinery, etc. Product picture, flow diagram, etc.

We supply Copper nugget materials to nonferrous metal manufacturers,

as well as FC/FCD steel materials for mold manufacturers.

Lumbering industry, industrial waste industry

Recycling and waste treatment Biomass, fuel supply equipment, saw mills

Product

features/

character

istics

Biomass fuel supply equipment, industrial waste plants

Appeal

pointWe provide comprehensive services from design to manufacturing.

Description

of business

Plant equipment (boiler fuel separator stock line, wooden waste crushing line), transport machines (feeders,

conveyors, etc.), dust collectors (bug filters), wood processing machines

Contact

Recycling and waste treatment Metals, sorting and processing, material supply

http://nttbj.itp.ne.jp/0762757755/index.html

Description

of businessSupply of casting, steel refining and nonferrous metal raw materials

Malleable steel scrap, cut steel scrap & copper nuggets Product picture, flow diagram, etc.

Product

features/

character

istics

Various types of metal waste are sorted and processed for their

respective markets.

- Recycled steel from casting raw materials

- Recycled steel from steelmaking raw materials

- Recycled materials from nonferrous raw materials

Principal facilities: Shredders for thin steel plates, hydraulic cutters, press

machines & overhead traveling cranes with lifting magnets

Appeal

point

Mold manufacturers in Hokuriku region

Contact



No. G-29 ★ M-DIA ＆Co., Ltd. President Hiroyoshi MORI

Category Keyword

Product/ser

vice name

Applicable

field

Address 551-2 Nakamura, Namerikawa City, Toyama 936-0002, Japan

General Affairs Department Masae TANIGUCHI [email protected]

http://www.m-dia.com Tel: +81-76-476-0062 Fax: +81-76-476-0063

No. G-30 ★ NEXTRY INC． CEO Yoshihiro FUJII

Category Recycling and waste treatment Keyword

Product/ser

vice name

Applicable

field

Address 345-1 Akada, Toyama City, Toyama 939-8064, Japan

CEO Yoshihiro FUJII [email protected]

http://nextry.jp Tel: +81-76-464-5671 Fax: +81-76-464-5672

Description

of business

Designing, manufacturing, and selling environmental equipment mainly Eco-Separator separators/crushers,

manufacturing, repairing, and selling various machinery including hydraulic devices, and altering, repairing, and

selling used machinery

Crusher, separator, sorter, cutter, environment-related machine, machine, recycling

Solidification material, construction sludge treatment, dredge treatment, slime treatment

Description

of businessManufacturing and selling Earth Nature, a sludge volume reduction neutral solidification material

"Eco-Separator Series" separators/crushers Product picture, flow diagram, etc.

Product

features/

character

istics


　Eco-Separator" separator/crusher is our proprietary single-axis crusher.

It is a milestone product that performs crashing and separation

processes in a single unit for recycling mixtures of different types of

materials such as disposed electronic circuit boards, mobile phones,

small electrical appliances, and scrapped car components. The original

peeling technology significantly reduces work process. The separating

process with simple system configuration extensively saves the footprint

and total cost. The equipment has various functions such as chopping,

hammering, tearing, and shearing. It is designed to prevent entanglement

crushed objects, and accept various shapes and type of materials.

Appeal

point

- Individual blade can be replaced separately to reduce maintenance

cost. The blades have a long life and seldom break due to inclusion of

metal.

- The screen is replaceable so that product granularity is adjustable.

- The rotor is designed to bite deeply so that it can process without

applying pressure.

Auto manufacturers, metal refineries, electronics retail stores, and electric/optical cable manufacturers

Contact

"Earth Nature," a sludge volume reduction neutral

solidification materialProduct picture, flow diagram, etc.

Product

features/

character

istics

This product reduces the volume of mud piles by removing moisture from

high-water content sludge and dredge.

- After treatment, the soil remains neutral (pH 5.8 to 8.6), which can be

reused as vegetation soil.

- It can be applied not only to inorganic mud such as construction sludge

and bentonite sludge but also to organic mud such as dredge.

- Volume reduction cuts down on the cost for treating industrial wastes.

- The technology turns sludge into a form that can be transported on a

dump truck (with a cone index of 200 kN/m2 or higher), eliminating the

need for special vehicles (e.g. vacuum trucks).

Appeal

point

Using our sludge volume reduction neutral solidification material on site

for treating the sludge, which have been transported by vacuum trucks

and disposed of as industrial waste, greatly decreases the treatment

cost. The treated sludge can be recycled.

Pile driving in Shinagawa-ku (Tokyo) and Fukushima Prefecture

Contact

Dredge to be treated is piled in a pit, its specific gravity and watercontent are adjusted are kept constant.

Chemicals are charged and mixed using a portable soil amending machine.



No. G-31 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 8-10 Matsuuracho, Toyama City, Toyama 931-8406, Japan

Planning Department Director Akiyo MIYAZAKI

http://www.prtec.co.jp/ Tel: +81-76-426-1088 Fax: +81-76-438-0602

No. G-32 Recycle Tech Japan Co., Ltd. President

Category Recycling and waste treatment Keyword

Product/ser

vice name

Applicable

field

Address 1-46-1 Saiwai-cho, Minato-ku, Nagoya City, Aichi 455-0041, Japan

President Miki TAKATORI [email protected]

http://www.r-t-j.co.jp/ Tel: +81-52-355-9888 Fax: +81-52-355-9887

Plastic Recycling Technology Company Tatsushi FUJITA


Miki TAKATORI

Description

of business

Intermediate treatment and recycling of plastic containers and packaging, recycling of plastic industrial wastes, and

the sales of recycled plastic materials and products made with recycled plastic

Contact

Recycling and waste treatment Plastics, sorting, recycled products

Automatic sorting of plastics

Manual disassembly line

Appeal

point

2012 performance: Material recycling volume: 11,000 tons, material

recycling rate 100%

2012 IT Management Awards for Small and Medium Enterprises from

Ministry of Economy, Trade and Industry of Japan

Product picture, flow diagram, etc.

Product

features/

character

istics

The sorted plastics are turned into flakes and pellets based on types and

sold as products. Five automatic sorters with infrared rays automatically

sort plastics by material types.

The sorting precision is increased using gravity sorting and wind-power

sorting to produce recycled plastic flakes and pellets.

Appeal

point

The sorted plastics are turned into flakes and pellets based on types and

sold as products.

We accept PET bottle caps.

We accept worksite observation tours.

Amusement machines, parts reuse, material recycling

The sorted plastics are turned into flakes and pellets based on types and sold as products.

We accept PET bottle caps. We accept worksite observation tours.

Description

of business

Extraction & recycling of raw materials for recycling and reuse based on disassembly and sorting of plant waste

materials, as well as waste electronic devices, amusement machines, LCD panel glass and solar cell panel glass

Electronic devices, small household appliances, amusement arcades

Contact

Amusement machine disassembly and recycling with

IT-based management systemProduct picture, flow diagram, etc.

Product

features/

character

istics

- Goods are controlled by reading the QR code at acceptance and

disassembly.

- All materials recycled for LCD panels, not only glass but also polarized

film.

- Palletizing machine used for plastics to manufacture recycled pallets.

- Amusement machines and electronic devices are disassembled by

hand, to extract useful parts that manufacturers require, for cleaning

inspection and packaging before shipment as parts.

sieving and screening

Optical screening

Manual screening

Crushing and washing

Weight-based sorting

Wind-power screening

Granulation

Large bags, strings, and aluminum evaporation bags are removed in

advance to make it easier for the machines to sort materials.

Shining a light on individual plastic pieces to sort them into types based

on the optical absorption and reflection.

The crusher crushes the materials into 15 mm-square

pieces by types, which are then washed and dried.

The materials are separated into ones which float on water and ones

which do not. Only the materials which float on water are gathered and then washed and dried.

Thick materials (flakes) are directly made into products. Light materials

(fluffs) are put into a dryer.

The dried fluffs are heated at 200°C to melt and knead and turned into

pellets.

Small foreign objects and materials are removed in a large

rotary sieve (a drum with holes).

Process flow

Recycled plastic and products to use

sieving and screening

Optical screening

Manual screening

Crushing and washing

Weight-based sorting

Wind-power screening

Granulation

Large bags, strings, and aluminum evaporation bags are removed in

advance to make it easier for the machines to sort materials.

Shining a light on individual plastic pieces to sort them into types based

on the optical absorption and reflection.

The crusher crushes the materials into 15 mm-square

pieces by types, which are then washed and dried.

The materials are separated into ones which float on water and ones

which do not. Only the materials which float on water are gathered and then washed and dried.

Thick materials (flakes) are directly made into products. Light materials

(fluffs) are put into a dryer.

The dried fluffs are heated at 200°C to melt and knead and turned into

pellets.

Small foreign objects and materials are removed in a large

rotary sieve (a drum with holes).

Process flow

Recycled plastic and products to use



No. G-33 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 1088-3 Senbiki, Seki City, Gifu 501-3954, Japan

Mitsuyoshi HIROTA [email protected]

http://www.remic08.com Tel: +81-575-28-4008 Fax: +81-575-28-3114

No. G-34 SAIGAWAGUMI Co., Ltd. President Hiroaki SUEDA

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-13-4 Jounan, Kanazawa City, Ishikawa 920-0966, Japan

Director Haruo TOMOYASU

http://www.saigawagumi.com/ Tel: +81-76-221-8223 Fax: +81-76-223-5450

REMICMARUHACHI Co.,Ltd. Yaoki YAMASHITA

Recycling and waste treatment Concrete recycling

Description

of business

General civil engineering work, water facilities work, water retention/penetration paving work, sewer culvert

maintenance/repair, industrial waste transportation

Description

of business

Production and sales of raw concrete, concrete recycling, sales of raw concrete treatment agents, sales of mobile

mixer trucks, mobile concrete, etc.

Concrete recycling facility Product picture, flow diagram, etc.

Product

features/

character

istics

• Recycled concrete (RC): Concrete rubble is crushed and recycled as

recycled macadam and roadbed material.

• The WA series: Roadbed improvement material, WA is injected into

excess raw concrete, which is then stirred at high-speed and discharged

and made into aggregates, which are reused as roadbed material.

Appeal

point

Construction company, raw concrete production company

Concrete rubble treated with WA does not solidify and instead forms

aggregates, which do not have to be crushed in a crusher, and loading

work is also easy.

ContactGeneral Affairs Department

Recycling and waste treatment Water retention/penetration paving using waste tiles

Product

features/

character

istics

Features

- Recycling waste tiles as aggregates

- Suitable for semi-flat pavement in compliance with the new barrier-free

law

- Contribution of construction to groundwater recharge

(Published in NETIS HR-100009-A,

Ministry of Land, Infrastructure, Transport

and Tourism)

Appeal

point

Pavement materials　(Patent No: 4387995(JP))

Ministry of Land, Infrastructure, Transport and Tourism (NETIS

registration No: HR-100009-A）

"Kawara-maru" Water retention/penetration paving using

waste tilesProduct picture, flow diagram, etc.

Kanazawa City, Ishikawa Prefecture; Komono Town, Mie Prefecture; Nagoya City, Aichi Prefecture; Awara City,

Fukui Prefecture; electric power companies


WA is injected.

Stirred at high speed for about three minutes and then discharged.Roughly stirred with a

Used as the roadbed material as recycled crusher.No large space is required. Can be used at a work site as well.Reduced noise, vibration, and dust.

Types of paved surface structurefor rainwater seepage

Drainage Permeable Water-retentive

Road

Base

Surface

Rain RainRain

Penetration

Evaporatio

Lacunal water

retentionDrain



No. G-35 ★ SANWAYUKA INDUSTRY CORPORATION Hitoshi YANAGI

Category Keyword

Product/ser

vice name

Applicable

field

Address 15 Fukada, Ichiriyama-cho, Kariya City, Aichi 448-0002, Japan

Akihito NAKAYAMA [email protected]

http://www.sanwayuka.co.jp Tel: +81-566-35-3000 Fax: +81-566-35-3023

No. G-36 ★ SHINKO TECNOS CO., LTD. President Mamoru KIMURA

Category Keyword

Product/ser

vice name

Applicable

field

Address 1-1-20 Masumida, Ichinomiya City, Aichi 491-0043, Japan

President Mamoru KIMURA [email protected]

http://www.shinko-mfg.co.jp Tel: +81-586-28-9461 Fax: +81-586-24-4502

Recycling and waste treatment Waste treatment, recycling

Description

of business

Manufacturing of chemical products (function products with high purity), collection and recycling of solvents/

chemicals/ metals/ solids, manufacturing of oil products, casting, and waste treatment.

Industrial waste treatment and resource recycling Product picture, flow diagram, etc.

Representative Director

8 companies in Fukui, Yamagata, Shiga, etc., as well as 2 overseas in China and Indonesia

Contact

Product

features/

character

istics

We have been expanding its business on the theme of "creating

environmental needs".

Our core technologies are separation and high purity. With them, we do

wide range of business from collection and transportation of industrial

waste to manufacturing of reused/ recycled products for the sake of

effective use of the earth's resources.

Having various permissions of intermediate treatment and observing the

status of wastes, we offer the best solutions to our customers.

Appeal

point

With the proposals of waste treatment and/or Resources-Recycled

Products, we do our best for the customers to reduce environmental

impacts and treatment costs in all aspects.

Based on our reliability and performance, we have dealing with more

than 2,000 customers nationwide.

Appeal

point

Recycling amount: 74,000t in FY2011

ContactAdministration Department Subsection chief

Recycling and waste treatment Waste plastic, liquefaction

Description

of business

Optimized processing and recycling of various waste materials with application of technologies in dyeing equipment

manufacturing. Waste plastic liquefaction devices, kitchen garbage processing plants, carbonization devices,

sludge treatment devices, etc.

Waste plastic liquefaction devices Product picture, flow diagram, etc.

Product

features/

character

istics

Liquefaction & recycling of waste plastic

Waste plastic put into the pyrolysis tank of the device turns into gas

through thermolysis. The gas is reformed (with carbon chain cutting)

through catalytic action in the catalysis tank.

Later, it is cooled in the condensers, liquefied and recovered as recycled

oil. The 1st condenser recovers oil with high boiling point by cooling at

higher temperature. The 2nd condenser cools the oil at low temperature

for recovery of oil with low boiling point.

Testing is possible before installation. Also, total solutions from

preprocessing target waste to treatment of residual matter are also

offered.

Customers

Thermal recycle

Material recycle

Reuse

Feedstock for recycle

Recycle

Reuse products

Resource-recycling products

Products for fuel

Reuse

Reutilization products

Recycling of resources

Utilization as energy source


mailto:[email protected]#


No. G-37 President

Category Keyword

Product/ser

vice name

Applicable

field

Address 1361-1 Tozenji, Fujiwara-cho, Inabe-shi, Mie 511-0515, Japan

Katsuyoshi OKA

http://www.taiheiyo-cement.co.jp Tel: +81-594-46-2513 Fax: +81-594-46-2212

No. G-38 ★ TAKAGI CHEMICALS, INC. President Hiroyuki TAKAGI

Category Keyword

Product/ser

vice name

Applicable

field

Address 21-1 Horita, Oobata-cho, Okazaki City, Aichi 444-3502, Japan

Katayose Factory Factory manager Noriaki TAKAGI

http://www.takagi-kagaku.jp Tel: +81-564-82-2030 Fax: +81-564-82-3605

TAIHEIYO CEMENT CORPORATION Fujiwara Plant Shuji FUKUDA

Fujiwara Plant, Manufacturing Division, Manufacuturing Section

Power companies, iron and steel industry, cleaning factories, sewage companies, and other local governments and industries


Appeal

point

• We usually accept and process wastes throughout a year.

• We detoxify wastes through high-temperature incineration process at

1,450°C and turn them into resources.

• We can accept and process a few kilograms to few tons of wastes.

Product

features/

character

istics

[Alternative materials]

Sewage sludge, soil generated at construction sites, processing of

incinerated ash (containing coal ash) (also acid and alkali waste, animal

and plant residue, metal scraps, glass scraps, slags, etc.)

[Alternative fuel]

Processing of waste plastics, wooden scraps, paper scraps, used tires,

rubber scraps, waste oil, fiber scraps, and ASR

We use wastes which are difficult to handle in other industries as

alternative materials and fuels.

[email protected]

Description

of business

TAKAGI CHEMICALS, INC. is pursuing possibilities of novel materials through the development and manufacture of

three different type products, resin casting, sheet metal pressing/surface finishing and manufacturing of synthetic

fiber.

Appeal

point

We received a regional incentive for technology research and development from the

Chubu Bureau of Economy, Trade and Industry to develop the flame-retardant fiber.

Subsequently, we developed our "hybrid flame resistance technology" with strategic

support to improve fundamental technologies, and developed a variety of environmentally-

friendly flame resistance fiber products and community-based recycling systems.

Product

features/

character

istics

Sewage sludge, incinerated ash, waste plastic, waste tire, resource recycling

Description

of business

Cement industry, material businesses, and environmental businesses in Japan and overseas businesses. Waste is

processed as material recycling and thermal recycling in a cement production process.

Environmental business: Detoxification of wastes and

transformation of the wastes into resourcesProduct picture, flow diagram, etc.

Contact

Automobile interior parts, disaster-related products

[email protected]

Recycling of PET bottles Product picture, flow diagram, etc.

Recycling and waste treatment PET staple fiber, flame resistance

Our recycling technology to recycle waste PET bottles into staple fiber was developed for

the first time in the world in 1972, and we have been working to create high added value

products since then.

- Environmentally-friendly flame resistance was added to the recycled PET fiber. The

flame-retardant fiber does not require conventional flame resistance backing material, and

thus enables single material composition, allowing light-weight products, improvement of

recycling rate and cost reduction. The flame-retardant fiber has superior flame resistance

compared with existing flame resistance fiber.

- Through the establishment of basic technologies by industry-university-government

collaboration and the expansion to a wide range of areas, we continue to work on activities

to raise awareness of resource recycling in cooperation with local municipalities.

The flame-retardant fiber burning

experiment

■ Cement production process and waste residue and byproducts

Limestone

Raw materials

Raw material mill

Rotary kiln

Finishing mill

Raw material preparation and

crushing process

Limestone and raw materials are mixed and dried and then crushed in the raw material mill.

After pre-heating, the materials are burned in the rotary kiln. The materials are then quickly cooled, and a semi-finished product called clinker is produced.

A small amount of gypsum is added to the clinker, which is then crushed in the finishing mill, and cement is produced.

Wastes used and byproducts

Raw materials

Coal ash, sludgeNon-ferrous slag, steel making slag,

soil generated from construction sites, foundry sand

Raw materialsIncinerated ash, fly ash, waste acid and alkali, animal and plant residue, metal scraps, used clay, sewage sludgeFuelWaste oil, waste plastic, waste tire, and wooden chips, recycled oil, BOF, ASR, paper scraps, rubber scraps, fibers

Gypsum

Desulfurized gypsum, gypsum as chemical byproduct

Mixed materialSlag powder, fly ash

Fujiwara Plant

■ Cement production process and waste residue and byproducts

Raw materials

Coal ash, sludgeNon-ferrous slag, steel making slag,

soil generated from construction sites, foundry sand

Raw materialsIncinerated ash, fly ash, waste acid and alkali, animal and plant residue, metal scraps, used clay, sewage sludgeFuelWaste oil, waste plastic, waste tire, and wooden chips, recycled oil, BOF, ASR, paper scraps, rubber scraps, fibers

Gypsum

Desulfurized gypsum, gypsum as chemical byproduct

Mixed materialSlag powder, fly ash

Fujiwara Plant

Raw material mill

Limestone

Raw materials

Raw material preparation and

crushing processFiring process Finishing process




Category

Product/ser

vice name

Applicable

field

Address 2321-2 Dachicho, Toki City, Gifu 509-5401, Japan

Development Department, Manager Motoharu SUZUKI

http://www.takasago-inc.co.jp Tel: +81-572-59-1234 Fax: +81-572-59-2033

No. G-40 TAKAYASU CO., LTD. President Yoshihide TAKAYASU

Category Keyword

Product/ser

vice name

Applicable

field

Address 3-47, Sohara Murasame-cho, Kakamigahara City, Gifu 504-0828, Japan

Fiber Department Director Chihiro WATANABE

http://www.takayasu-rf.co.jp/ Tel: +81-58-382-2231 Fax: +81-58-380-1121


Recycling and waste treatment Rotary kiln, recycling, dry distillation, carbonization facility, biofuel

Takasago Industry Co., Ltd. Tatsuya SUZUKI

Description

of businessDevelopment, design, production, and sales of rotary kilns for dry distillation and carbonization of organic matters

Product

features/

character

istics

The lineup of carbonization facility includes the continuous external heat-

type gas-heated rotary kiln, batch-type rotary kiln, and continuous

internal-combustion rotary kiln. We develop and produce unique heat

treatment systems to respond to the needs of our customers such as

special atmosphere and usual atmosphere as well as specific purposes

as the professional of heat treatment system.

Appeal

point

[email protected]

Recycling and waste treatment Plastic, fiber, non-woven fabric

Description

of business

As a pioneer in macromolecular chemical recycling and application, waste plastics that are particularly difficult to be

recycled are being recycled and reused as material.

Carbonization facility business

Takayasu Ester, recycled discontinuous polyester fiber, and

Cyclean

Product

features/

character

istics

- Takayasu Ester is being manufactured by recycling PET bottle scraps

and waste film from plants and processed into fiber. It is delivered to

various manufacturers as non-woven fiber, yarn, etc.

　 1. It can be dope-dyed (pigment dyeing).

　 2. Processing can be done for relatively small lots.

　 3. High-added-value processing is possible, including resistance to

bacteria and odor and fire resistance.

　 4. This is an effective means to acquire Eco Mark certification.

- Cyclean uses used PET bottles.

- The material is used as raw material for automobile interior materials,

uniforms, non-woven fabric, etc.

Appeal

point

1978: Award from Japan Clean Center

1998: Award from Recycling Promotion Council (presently 3R Suishin

Kyokai)

2006: Special Recognition from Medium and Small Business Research

Institute

Local government corporation, sewage companies, Doei Shigyo, Kyokuto Kaihatsu Kogyo

Contact

Automobile industry, apparel interlining cloth, etc.

Contact

Product picture, flow diagram, etc.

We develop and produce customized heat treatment systems for

individual customers while listening to their requests and repeating tests

using our test furnaces and also providing advises based on test results

as the processional of heat treatment facility. We can provide stable

services because we offer an integrated service including development,

design, production, and maintenance.

Gas-fired rotary kiln

Internal combustion rotary kiln

Batch-type rotary kiln

material: PET yarn-making

cutting stretching

Takayasu Ester



No. G-41 President

Category Keyword

Product/ser

vice name

Applicable

field

Address Nu161-4,Hamamachi,Nomi,Ishikawa,Japan 929-0124

Managing Director Mikio UMEKAWA

http://www.tecone.co.jp Tel：+81-76-155-0761

No. G-42 TOIDEKASEI CO., LTD. President Toshio TAKAHATA

Category Keyword

Product/ser

vice name

Applicable

field

Address 414 Toide Nishibukanaya, Takaoka City, Toyama 939-1114, Japan

President Toshio TAKAHATA [email protected]

http://h-tkc.co.jp/ Tel: +81-766-63-5152 Fax: +81-766-63-5099

TEC ONE Co., Ltd. Tadahiko TAKEDA

Recycling and waste treatment Kitchen garbage decomposition system

Product

features/

character

istics

We signed an sales agency contract with Sinkpia Japan to sell this product.

This machine “disposes of kitchen garbage on the spot without transporting or

burning them” and instead by biologically decomposing them.

This machine decomposes kitchen garbage containing edible materials into water

and carbon dioxide.

This machine uses biological decomposition and does not require maintenance.

Our agent visits each customer once every six month to service the machine.

For business use: The lineup includes 20 kg, 30 kg, 50 kg, 100 kg, 150 kg, 250 kg,

and 500 kg of daily processing capacity.

For household use: Only the 1 kg type is available. This type is directly built into a

kitchen sink.

Appeal

point

Description

of businessMolding and sales of various plastic products

Meal supply centers for hospitals and schools, restaurant industry including hotels, household appliance

companies, households

[email protected]

Comparison of wood-plastic composite

(WPC)

The material has been used for construction parts, office supplies, automobile interior decoration goods, household

appliances, etc.

Contact

Product

features/

character

istics

We have developed an environment-friendly resin not found in existing

high-filling residence by making use of low-use resources, such as

thinned cedar wood, seashells and other biomass materials, as well as fly

ash (incinerated coal ash) discharged by coal-charged thermal power

plants, for conversion into micro-filler under pressurized steam and

uniform dispersion with resin (Patent No. 46605285(JP)).

- Stable molding is possible at mixture rate of resin as high as 70%.

- At present, development is underway to create products by mixing

high-melting point resins. it is also possible to manufacture high-

performance residence with attention to fire and weather resistance.

Biomass material manufacturing technology (micro-filler

technology)Product picture, flow diagram, etc.

Fax：+81-76-155-4175

Materials developed by our company will enable reduction of carbon

dioxide emission through replacement of petrochemical-derived resins by

environment-derived resins. At the same time, our contribution to the

development of a recycling society has been recognized with certification

as a project subsidized in the FY 2012 Takaoka Industrial & Cultural

Promotion Fund .

Sales of kitchen garbage decomposition system Product picture, flow diagram, etc.

Recycling and waste treatment Biomass-related, composite plastic material

Description

of businessSynthetic fabrics dyeing and finishing process

Contact

Appeal

point

Dryer or deodorizing system is not necessary.

This machine can be installed indoors.

The microbial biomass and bacterial bed provide extremely high

processing capacity and make this system compact and low cost.

Conventional WPC TOIDE's WPC

Wood powder observed on

surface

Good appearance

Coarse particles are observed.

Particles become fine fibrous



No. G-43 ★ Tokai Bio, Ltd. President Morie TSUGE

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-247 Nabeyama, Osashima-cho, Ena City, Gifu 509-7211, Japan

Technical and Sales Department

http://www.tokai-bio.com/ Tel: +81-573-28-0061 Fax: +81-573-28-0062

No. G-44 ★ Tokai Techno Co., Ltd. Junichi ICHIDA

Category Keyword

Product/ser

vice name

Applicable

field

Address 2-4-18 Umaokoshi, Yokkaichi City, Mie 510-0023, Japan

Environment Division Kazuhisa KITADE [email protected]

http://www.tokai-techno.co.jp Tel: +81-59-340-7767 Fax: +81-59-333-8055

We would like our products to be used by fishery cooperatives who have

difficulties in disposing of shells and people concerned with the fishing

industry who wish to create seaweed beds.


Contact

Product

features/

character

istics

- This product is produced by solidifying in a safe and special process the

principle raw materials such as oyster shells and other shells including

scallop shells.

- In addition to fertilizer applications, the product is highly effective in

cultivating and promoting the growth of natural Manila clams and clams.

- Setting the in the ocean quickly creates a seaweed bed, which has

been proved to serve as a feeding area for marine organisms that eat

abalones and lobsters.

"Careshell"

Appeal

point

Appeal

point

Several ten places in Japan

Customers: MLIT, prefectures, neighboring municipalities, household electrical appliance manufacturers,

construction companies, agricultural judicial persons, etc.

Contact


Description

of business

Environmental measurement/analysis and maintenance of measuring instruments, product quality evaluation, and

assisting research of new energy and resource recycling

"Careshell", marine life growth promoting/marine

environment restorative material made from oyster shellsProduct picture, flow diagram, etc.

Kiyoshige TSUGE

President&CEO

Composting, consulting

Description

of business

Converting mowed riverside grass (organic waste) into bio-compost; organic waste treatment; selling high-

performance soil improvement material and wood chips; waste treatment consulting; and environmental

improvement consulting; etc.

Converting organic waste into bio-compost with the

"BES"(bio-eco-system)Product picture, flow diagram, etc.

Product

features/

character

istics

We provide an eco-system for composting organic waste with bio-

bacteria, improving malodor issues, re-cultivating run-down fields, and

composing night soil sludge.

- Organic soil from 1000 m3 can produce approximately 500 m3 of bio-

fertilizer.

- This technology turns various organic waste to bio-fertilizer in as short

as 60 to 90 days.

- It converts organic waste into 5,000 tons of compost per year.

Regular Turning (for Approximately 3

Months)

2012: "Organic Waste Site Composting Method (Local Production for

Local Consumption Method)" was registered in the New Technology

Information System (NETIS) (No. CB-110049-A) by the Ministry of Land,

Infrastructure and Transport (MLIT)


Oyster shell, shell, shellfish cultivation, seaweed bed

Natural

Natural nutritional supplement made from solidified oyster

Pellet

large size (



No. G-45 TOYOKIN CO., LTD. President Naoto FUJIWARA

Category Keyword

Product/ser

vice name

Applicable

field

Address 3-33, Kounosu-cho, Toyota City, Aichi 471-0836, Japan

Sales Department Assistant director Hideo SATO [email protected]

http://www.toyokin.co.jp Tel: +81-565-28-2222 Fax: +81-565-28-7585


Category Keyword

Product/ser

vice name

Applicable

field

Address 1-32 Amakasugashinmachi, Yokkaichi City, Mie 510-8002, Japan

President Keiji UESUGI

http://www.uesugi-p.co.jp/ Tel：+81-59-365-6800

Factories of businesses located in the Tokai region, mainly in Mie

[email protected]

Fax：+81-59-363-2055

Sorting non-ferrous metal wastes and processing and selling

copper materialsProduct picture, flow diagram, etc.

Product

features/

character

istics

We sort and collect copper and copper alloy from wastes such as electric

wires, copper pipes, copper plates, and copper alloy (brass-coated metal,

etc.). We then turn them into chips to be sold as cooper material.

We form the copper material into shapes which satisfy needs of our

customers.

Appeal

point

A proper recycling requires the proper sorting of materials and types.

We are properly collecting and transporting wastes, of course, and

dismantling and sorting them at specific points to ensure proper and

effective recycling.

（Accepts LLC)　Automobile dealers

Contact

Recycling and waste treatment Non-ferrous metals, copper, recycling

Description

of business

Recycling of non-ferrous metals, metals, and covered wires; recycling of precious metals and printed substrates;

demolition work in general; water treatment; zero-emission work; medical waste treatment; memory and support

work (sorting and disposal of items left behind by the diseased)

Uesugi Co., Ltd. Keiji UESUGI

Engine cooling water (LLC) microorganism treatment Product picture, flow diagram, etc.

Product

features/

character

istics

Waste LLC Microorganism Treatment Plant, based on Ethylene Glycol-

contained water treatment method and microorganism, performs

continuous type microorganism treatment; the Carrier Fluid Bed Method

(excellent in the affinity for microorganism and possible to treat high-

efficiently) and the Membrane Separation Activated Sludge Method

(stable and advanced treatment water quality can be always obtained)

are used together. Nearly 100% high concentrated Ethyl Glycol is able to

be removed through the function of this microorganism.

Waste treatment plantAppeal

point

Detoxifying waste that used to be incinerated to be safely released back

into the environment.

Winner of excellent prize of "2006 Aichi environmental prize "excellent

prize winning

Industry collaboration (Collaborative research with Toyota Central R&D

Labs., Inc. and Meidensha Corporation)

Recycling and waste treatment Waste liquid treatment, microorganisms

Description

of business

Metal resources recycling/processing, logistics, waste management, building demolition, fluorescent light recycling,

appropriate treatment of end-of-life vehicles, rental and management of forklifts/vehicles for work at height, damage

insurance agent, etc.

配線

工場

部品

工場

ﾊｰﾈｽ

工場

ワイヤーハーネスのナゲット処理工程へ

導体屑被服廃材電線屑端子屑ハウジング屑ハーネス屑 (余剰品・不良品)

溶解・精製再ペレットナゲット処理銅回収

端子屑粉砕ナゲット処理銅・銅合金回収

電線導体再生チューブ銅合金製品ハウジング

リサイクル／埋め立てリサイクル／埋め立て

WiringFactory

ComponentFactory

HarnessFactory

Electric

conductor

scraps

Clothes scraps

Electric wire scraps

Connector scraps

Housing scrapsHarness scraps

(extra products and defective products)

Nugget processing

Collection of copper

and copper alloy

MillingConnector scraps

Nugget processing

Collection of copperRecycled pelletMelting and

refining

Electric wire and conductor

Recycled tube Product made of copper alloy

Housing

Recycling/Reclamation

Recycling/Reclamation

To the nugget process of wire harness


G) Recycling and waste treatment - Minister of Economy ... · G) Recycling and waste treatment No....

Documents

Transcript of G) Recycling and waste treatment - Minister of Economy ... · G) Recycling and waste treatment No....