G E N E R A L CATALOGUE - URMET · G E N E R A L CATALOGUE. FDI MATELEC 1 G E N E R A L ... The...

CONTROLLERS

PROXIMITY READERS

RF RECEIVERS

PROXIMITY KEYS AND CARDS

DUAL-TECHNOLOGY REMOTE CONTROLS

KEYPADS

ENTRY PANELS

SOFTWARES

ACCESSORIES

G E N E R A L C A T A L O G U E

FDI MATELEC

1


Designer and manufacturer of access control products since 1989, FDI MATELEC controls all its projects from conception to production.

Key player in residential and industrial access control applications, thanks to the use of up-to-date technology and highly skilled people, FDI MATELEC offers a range of products adapted to each project, from dedicated solutions to small single-site installations as well as large multi-site networks.

The company is a subsidiary of Urmet France since 2000 (Urmet group Italy).

FDI MATELEC is part of the group of professionals at the initiative of Vigik label and its products are approved.Its entry panels are DDA compliant as well.

From its site of 2500 sqm based in Vendée (West part of France), FDI MATELEC has been exporting its products worldwide since 2004.From its site of 2500 sqsqm based in Vendée (West part of France), FDI MATELEC has been expopopoporting its prprproducts worldwide sisisisincnce 20040404....

2/3

FDI MATELEC services

FDI design, technical and Test department

To be at the cutting edge of innovation, FDI MATELEC invests each year in its design and technical department.The result is a team of 28 technicians and engineers divided into 3 skills areas : • the hardware department developping the electronic boards,• the embedded software department that creates the management applications of the electronic boards,• the PC department developping softwares that will be the interface between the user and the hardware.

-cated to research and innovation. All developments include a comprehensive study to reduce the product’s impact on the environment throughout its life cycle. The products are designed to facilitate and simplify the ergonomic use by clients (installer, user ...).

Finally, to ensure the best performance, a team of 4 technicians, separated from the design and technical department, is dedicated to the validation of new products or main changes. Each element must successfully pass the functional test plans to validate its full operation and reliability for com-mercialization (controller, software ...).


FDI :

CUSTOMERS

AT THE HEART

OF OUR CONCERNS

FDI’s production

A team of 35 people works in FDIs production factory of 2500 sqm.

The site is equipped with high-technology machines :• 1 soldering paste print machine DEK ELA Horizon,• 1chip shooter MYDATA MY100DX latest generation of 32 000 components per hour,• 1 SOLTEC soldering oven 8 zones for soldering and polymerization of glue,• 1 automatic optical inspection machine ISP (automatic optical control of components by comparing image)• 1 3D X-ray inspection machine (for the control of BGA)

• 2 milling machines for machining and etching of plastics, aluminum and brass,

• Multiple assembly areas with adjustable torque screwdrivers.

The entire installation allows a capacity up to boxes of 0.1 mm sized on 0.05mm BGA 0.4mm pitch, the measuring value of discrete components, video analysis, traceability of components on the boards and automated tests.

FDI MATELEC’s manufacturing process is consistent with the ROHS Directive regarding the elimination of lead into tin solder.

This way, FDI MATELEC can produce more than 1.2 million RFID keys and HF remote, 26000 controllers, 44000 HF readers and RFID receivers and more than 8000 intercom panels per year.

4/5

Quality FDI

The actions focused initially on product quality, FDI then extended its objectives to a system of quality management of all its activities based on the principle of continuous improvement.

The customer is the center of FDI’s organization and all actions aim at maintaining a maximum level of satisfaction. Minimizing the risk for the client is part of daily decisions. It requires the involvement of all employees, every one being responsible for the quality of his function.

united around a common project.FDI is located in a rural area and therefore sensitive to its impact on the environment. In order to achieve this, FDI indeed commits itself in a willingness based on ISO 14001.

-ous improvement:• Find solutions to adapt modes of operation to our environment and to meet customer expectations,• Develop commercial offer according to the rules “clean products”• Reduce the impact of the company on its immediate environment.

FDI : Founder member of the

recycling branch DEEE Pro.


SUMMARY

FDI Matelec 1

Choosing your access control... 6

Read and write management 22

Standalone management 8

On line management 30

Accessories 50

Panels 72

Pa

ne

ls A

cce

sso

rie

sO

n l

ine

Re

ad

an

d w

rite

Sta

nd

alo

ne

Keypads 10

Easy Door Controller 12

Transit 16

Easy Door Controller 24

Passan 32

Ipervoice 42

Transit IP 46

Readers and receivers 52

Proximity keys, ISO cards and remote controls 62

Buttons, electromagnetic locks 68

PSTN panels 74

To ensure continued improvement, FDI Matelec reserves the right to make any changes considered useful.For any technical precision, do not hesitate to contact us.

Non contractual pictures.

What is the access control ?

Access control allows or refuses the access to a person or group of people in order to improve the safety of a building.

When a key is presented to the reader, the reader sends the information (usually a serial number) to a controller.

The controller compares the received information with its data, allows or refuses the access and sends information to its database.

When access is refused, the door remains closed.

When access is granted, the controller activates a relay that opens the door.

Why using electronic access control ?

In the case of a conventional lock, when a key is lost, you must replace the cylinder lock plus any other key to ensure that

in the controller and the lost or stolen key becomes inactive.

Secondly, electronic keys cannot be copied. Safety is increased.

3 POSSIBILITIES TO MANAGE YOUR ACCESS CONTROL :

. Standalone management

Standalone management is carried out on site.

It means being physically near the keypad or the controller to program it. This type of management is preferred when the system

requires few intervention or when a person is present on site and able to make these changes, a caretaker for instance.

A keypad is programmed by a master code and does not require to be disassembled to be set. The programmed secret code can

have from 3 to 8 terms and can be changed as often as desired by using the master code. The keypad is the simplest and most

economic access control solution.

Programming a standalone controller does not need any tool whereas a controller requires a central programming terminal or a

software installed on a computer.

It has at least a programming mean (switch and/or master key) and has often a keypad and a display.

Please note, a controller can be either a standalone

controller either not.

For example, it can work with a

standalone management for a simple management,

but may require a software to offer more opportunities.

Generally, keypads and standalone controllers

are preferred for small installations.

In traditional access systems, each electronic key has

a unique electronic serial number allowed or not into

controllers.

This is called read-only.

6/7

CHOOSING YOUR ACCESS CONTROL...

Standalone management

I3 VANDAL RESISTANT KEYPAD Doors : 2Up to 22 codes

TRANSIT 125KHzDoors : 2 Users : 999

EASY DOOR CONTROLLERDoor : 1Users : 1500

K-PADDoors : maximum 4Up to 100 codes


. Read and write management

Read and write management is performed off-site.

This technology enables remote management while providing more opportunities than standalone management settings.

The manager can manage its badges from home without moving to the controller.

In read and write management permissions are stored in the key. Keys have therefore a large memory to store these per-

The software can be installed on a PC or be a web-based software accessible from anywhere with a login and password.

When a key is presented to a reader, the controller read permissions inside the key, authorizes it or not, and updates its own

memory. It is no longer necessary to go to the site to add a key, and a key can also be removed from a controller to prevent

. On line management

We talk about on line management when programming keys is performed offsite in real time.

From one place, the user manages access to an unlimited number of buildings, connecting to sites via modem or TCP/IP.

As soon as the user enters new settings in his software, controllers are updated. Controllers are able to pull up information

on the computer in real time. For example, a door kept open will activate a popup on the PC screen.

Read and write management

EASY DOOR CONTROLLERDoor : 1 Users : 2000

On line management

PASSANPREMIUMDoors : 6 to 192Users : 2700 or 10000

TRANSIT IPDoors : 2Users : 5000

Pa

ne

ls A

cce

sso

rie

sO

n l

ine

Re

ad

an

d w

rite

Sta

nd

alo

ne

Pa

ne

ls A

cce

sso

rie

sO

n l

ine

Re

ad

an

d w

rite

Sta

nd

alo

ne

8/9


EASY PROGRAMMING ON THE PRODUCT AND

WITHOUT ANY TOOLS.

COST EFFECTIVE SOLUTION FOR A SIMPLE

ACCESS CONTROL.S

TA

ND

AL

ON

EM

AN

AG

EM

EN

T Sta

nd

alo

ne

Sta

nd

alo

ne

10/11

FDI KEYPADS

Wiring diagram

- Electronic 22 resident codes of 3 to 8 digits

- 2 door relays NO / NC

- Lock release time : from 1 to 99 seconds

- 1 Master code

- Backlights available

- Operating temperature : -10°C to + 70°C

2 wires

2 wires

2 wires

FDI keypads allows the opening of one or several doors for residents.

The door opening is performed by dialing a secret code from 3 to 8 digits.

Programming is done directly on the keypad by master code without removing the front cover.

FDI keypads are simple to wire:

two wires to connect to the lock, two wires to connect to the power supply and two wires to connect to the push button.

FDI keypads are ideal and suitable for any type of property for the control of 1 or 2 doors.


IP 65

GB-060-218 SURFACE MOUNT KPAD PROTECT+ 2 RELAYS (8A and 1A)

VANDAL RESISTANT

Keypad under blister especially designed for automation applications

(alarms, gates...)

Dimensions (L x H x D) : 120mmx83mmx36mm -

Material : Zamak housing. Ultra resistant material. IK10 rated.

Capacity : 100 user codes.

Codes from 3 to 8 digits.

3 leds : yellow (for the keypad), green and red (status leds), buzzer.

Lock release time : 1 to 99 seconds (monostable or bistable)

Programming by master code.

Keypad with blue backlights.

Push to exit input.

Tamper.

Clock input for time management.

Power supply : 12-24 Vac/Vdc.

IP65 rated.

Operating temperature : -20° to +60°.

FD-060-164 I3 STAINLESS STEEL KEYPAD WITH BACKLIGHTS

Dimensions (L x H x D) : 135mmx100mmx43mm.

Flush mounted. Stainless steel front plate 2,5mm thick.

Programming through the front frame via a master code.

2 dry contacts and 1 exit collector open.

Wide Braille buttons with backlights diam. 16mm, blue leds.

Removable terminal connections, led and operating buzzer.

Rain hood in option to adapt it in surface mount keypad (part number : 60-030-277).

Power supply : 12Vac or 12Vdc.

2 wires

2 wires - green led

2 wires - red led

Alarm

Sta

nd

alo

ne

Sta

nd

alo

ne

GB-060-118 SURFACE MOUNT KPAD 2 RELAYS (8A and 1A)

Keypad under blister especially designed for automation applications

(alarms, gates...)

Dimensions (L x H x D) : 120mmx83mmx36mm - Material : polycarbonate housing.

Capacity : 100 user codes.

Codes from 3 to 8 digits.

3 leds : yellow (for the keypad), green and red (status leds), buzzer.

Lock release time : 1 to 99 seconds (monostable or bistable)

Programming by master code.

Keypad with blue backlights.

Push to exit input.

Tamper.

Clock input for time management.

Power supply : 12-24 Vac/Vdc.

IP65 rated.

Operating temperature : -20° to +60°.

IP 65

IK10

12/13

- Dimensions (L x H x D) : 70mmx75mmx19mm

- Programming on site with master key

or handheld terminal

- Wiring : 2 wires/100m max between the controller

and reader

- Power supply : 12/24 Vac or Vdc

- Control relay NO/NC

- Adjustable lock release time from 1 second to 99 seconds

- Removable terminal connections

- Operating temperature : -20°C to +70°C

- Vigik approved product

Easy Door Controller is a standalone controller. It manages one door and 1500 keys. Easy Door Controller is easy to install

(only 2 wires to the reader) and easy to programm. Additions, cancellations and update badges are made by the master

key or through the handheld terminal.

Thanks to its size, Easy Central Door Controller is ideally suited to be mounted behind an entry panel.

Thus, you can add access control to your intercom system at a very attractive price.

GB-140-082

EASY DOOR CONTROLLER

Easy Door Controller is an economic and easy to

install service thanks to its small size, its wide power

supply range and easy programming.

-

13.56MHz MIFARE® 1 door 1500


READERS see table pages 64/65Distance maximum between reader and the controller : 20m with shielded twisted cable.

GB-140-082 Easy Door Controller

CONTROLLER

FD-020-081 Mullion reader 13.56MHz

Dimensions : 78mmx43mmx17mm.

Wire gauge : 2 wires - 100m.

FD-020-175 Mushroom reader 13.56MHz



Easy installation on existing plate (drilling Ø 25mm).

IP53 - M2 rated.

FD-020-086 Vandal resistant surface mount reader 13.56MHz



FD-020-007 40X40 panel mount reader 13.56MHz

Dimensions : 60mmx60mmx17mm OD.


Integration in drilling 40x40mm.

FD-020-176 Sinthesi S2 reader 13.56MHz

Dimensions : 85mmx85mm


FD-020-132 Sinthesi Steel reader 13.56MHz



FD-020-139 P60 black reader 13.56MHz

FD-020-156 P60 white reader 13.56MHz

Dimensions : 78mmx78mmx18mm


Surface mount or suitable for standard electric backbox.

see tatable pages 64/6/6/65

Sta

nd

alo

ne

Sta

nd

alo

ne

14/15

All our keys are rated IP68 - IK08.

MIFARE® technology.

Dimensions : 49.5mmx36mmx7mm.

With metal eyelet to be placed on a key ring.

Operating temperature -20°C to +70°C.

Engraving of a number of 8 terms and counterboring to prevent erasure.

Key uniqueness guarantee.

Customization on request.

GB-010-010 Proximity key 13.56MHz black

FD-010-010 Proximity key 13.56MHz black (without logo)

FD-010-027 Proximity key 13.56MHz white

FD-010-028 Proximity key 13.56MHz blue

FD-010-029 Proximity key 13.56MHz red

FD-010-030 Proximity key 13.56MHz green

FD-010-078 Proximity key 13.56MHz yellow

FD-010-081 Proximity key 13.56MHz orange

FD-010-080 Master proximity key 13.56MHz

To programm as a master key on the controllergr

Wiring diagram

PROXIMITY KEYS


12/24 Vac or Vdc – 200 mA12/24 Vac or Vdc – 200 mA

FD-500-005 Stainless steel push button diam. 19mm

Double contact NO / NC isolated.

Wire output.

Easy installation on existing plate (hole diam. 19.2 mm).

Screwing from the rear (nut supplied).

GB-500-009 Stainless steel push button diam. 19mm with plate 40x40mm


Wire output.

Easy installation on existing plate.


Printing on request (term «exit»).



Wire output.

Supplied without embedded box, with screw and tool.

Screwing from the front.

OPTIONS

Sta

nd

alo

ne

Sta

nd

alo

ne

GB-140-166 Kit Easy Door Controller with mullion reader

GB-140-167 Kit Easy Door Controller with vandal resistant surface mount reader

GB-140-168 Kit Easy Door Controller with mushroom reader

Kit Easy Door Controller with 1 controller,

1 reader to choose and 10 colored keys.

FD-010-051 Pack of 10 cards ISO 13.56MHz


Credit card size.

The code is on the cards to program and identify them easily.

Operating temperature : -20°C to +50°C.

GB-500-123 Handheld terminal


Allows control and management of 2 wires controllers from the reader.

delete / edit / add badges depending of the controller.

Operates with a battery and charger (included).

16/17


- Programming on controller

- Integrated receiver HF 433MHz (for remote control)

- Programming reader integrated

- Removable memory useful in case of backup or

copy / paste function

- Simple installation :

3 connection wires with proximity readers (up to100m)

- Fixed on DIN rail

- Power supply : 12Vac or Vdc, 1A

GB-100-021

TRANSIT

Transit is a standalone access control controller managing up to two doors. The controller has an enrolment reader, a

keypad (3 buttons ,

e ac

and ) and a display which enable a programming on site without any tools.

Transit has a HF receiver allowing the use of remotes.

Transit is a product well suited to residences which wish to equip themselves with a simple and easy system to control

an access thanks to RF (gate, garage) and / or a pedestrian access in proximity (gate, hall door).

125KHz / 433MHz 2 doors 999


GB-100-021 Transit 999 keys.

Transit is a controller up to two doors with a capacity of 999 users.

Integrated RF receiver.

Can be used in proximity (when added a reader) and in RF.

• Residential housing

Front door and house door controlled by a proximity key. Front gate controlled by left button of the remote control.

Door for building access controlled by the proximity key

integrated in the remote control.

CONTROLLER

POSSIBLE CONFIGURATIONS

Sta

nd

alo

ne

Sta

nd

alo

ne

18/19

FD-020-080 Mullion reader 125Khz



commercial property and residential housing.

Reading distance : up to 30mm.

FD-020-084 Vandal resistant surface mount reader 125Khz



Aesthetic and discreet design.

With a robust design, the reader is ideally suited

for a vandal resistant protection.


FD-020-006 40x40 OEM reader 125Khz



FDI also provides the 40x40 reader in stainless steel, Sinthesi

or Sinthesi-steel frame.


FD-020-005 Stainless steel reader 125Khz

Front dimensions : 110x110mm

Embedded box dimensions : 94mmx94mmx30mm.


IP-53 rated.


READERS see table pages 64/65


FD-020-131 Sinthesi-Steel reader 125Khz

Frame dimensions : 85mmx85x16mm.



FD-020-168 Sinthesi S2 reader 125Khz

Frame dimensions : 85mmx85x16mm.



FD-030-005 Mushroom reader 125Khz

Dimensions : 71.60mmx60.60mmx17mm.


Reading distance: up to 30mm.

Sta

nd

alo

ne

READERS see table pages 64/65

Sta

nd

alo

ne

OPTIONS

20/21



Wire output.





Wire output.

Easy installation on existing plate





Wire output.

Delivered without embedded box, with screw and tool.


FD-500-025 Stilus antenna 433MHz

Used to improve the reception distance.

GB-010-012 Proximity key 125KHz

IP68 - IK08 rated.




Key uniqueness guarantee. Customization on request.

FD-010-070 Pack of 10 cards ISO 125KHz


Proximity card in white PVC.

Credit card size. Remote control uniqueness guarantee.



FD-010-147 Combined remote control 125KHz/433MHz - 4 buttons

Remote control, key ring style including 2 channels 433MHz

and proximity key 125KHz.

Coded in factory, 4 billion possible combinations.


PROXIMITY KEYS / REMOTE CONTROLS see table pages 66/67


HF antenna 433MHz in option

Coax cable 50 Ohms 10m max

Wiring diagram in proximity

2 wires

3 wires

2 wires

2 wires

2 wires

3 wires

2 wires

2 wires

Wiring diagram in proximity and HF

3 wires

2 wires

2 wires

Door 1 Door 2

2 wires

2 wires

Sta

nd

alo

ne

Door 1 Door 2

Sta

nd

alo

ne

22/23


CENTRALIZED MANAGEMENT FROM A SOFTWARE NOT

CONNECTED TO THE CONTROLLER.

THE CONTROLLER IS UPDATED WHEN THE KEYS ARE

SWIPED.

RE

AD

A

ND

W

RI

TE

M

AN

AG

EM

EN

T

Re

ad

an

d w

rite

Re

ad

an

d w

rite

24/25

GB-140-082

EASY DOOR CONTROLLER

Easy Door Controller is an access control system designed for small residential applications. It is used remotely as

read-write mode using an encoder and an internet connection on

www.easydoorcontroller.com.

With our free web software really easy to use, manage your keys up to 50 doors/site.

For remote management, you simply have to :

Note the lock N° of the installed controller (written on label under the controller)

Register on www.easydoorcontroller.com

Program the keys using the encoder which records into the key one or several N° of allowed

doors.

To remotely delete permissions for a key, you must simply cancel that key on the website and program a new key. At

13.56MHz MIFARE® 1 door 2000



- Remote programming with an encoder and an internet

connection

- Wiring : 2 wires/100m max


- Control relay NO/NC

- Adjustable lock release time from 1 second to 99 seconds

- Removable terminal connections


- Vigik approved product

Re

ad

an

d w

rite


Re

ad

an

d w

rite

EASY DOOR CONTROLLER :

SIMPLE MANAGEMENT WITHOUT GOING ON SITE,

UNIVERSAL ACCESS AND SOFTWARE UP TO DATE

THROUGH INTERNET,

SAVED DATA.

Wiring diagram

a panel to add access control to your intercom system.

It is an economical solution that also minimizes maintenance

costs : the replacement of a proximity key in case of loss is

less expensive than replacing a mechanical key.

12/24 Vac or Vdc – 200 mA12/24 Vac or Vdc – 200 mA

26/27


GB-150-006

EASY DOOR RECEIVER

Easy Door Receiver is an RF access control device which has been designed for 2 gates and manage up to 2000 users.

It is the RF version of Easy Door Controller.

The same product can be managed either away from its installation place (remote management or so called Virtual

Network Mode) or on site (standalone mode).

In virtual Network, Easy Door remote controls and prox keys store and carry the programming of the site from your

computer where they are encoded to the doors/gates of the site. Your remote control or prox key is both your means

Do you manage your access control on-site, you have few users and you only need few remote controls ? Therefore, you

can use Easy Door Receiver simply and easily in standalone mode without any programming tool.

Easy Door Receiver even offers the possibility to connect a proximity reader in parallel to door 1. This reader can not only

be used for access but it is also useful to download events via a special proximity key.

868MHz/13.56MHz 2 doors 2000


- Programming through master remotes

or via www.easydoorcontroller.com

- Remote control reading distance : 100m


- Manages 2 relays :

Relay 1 RF and/or proximity - Relay 2 RF only

- Anti Pass back management

- Events management (20 000 events/months)

- Removable memory


- Complies with CE norms

100 m

Re

ad

an

d w

rite

READERS see table pages 64/65Distance maximum between reader and the controller : 20m with shielded twisted cable.

GB-140-082 Easy Door Controller

GB-150-006 Easy Door Receiver

CONTROLLER

FD-020-081 Mullion reader 13.56MHz



FD-020-175 Mushroom reader 13.56MHz



Easy installation on existing plate (drilling Ø25mm).

IP53 - M2 rated.

FD-020-086 Vandal resistant surface mount reader 13.56MHz



FD-020-007 40X40 panel mount reader 13.56MHz

Dimensions : 60mmx60mmx17mm OD.


Integration in drilling 40x40mm.




FD-020-132 Sinthesi Steel reader 13.56MHz



FD-020-139 P60 black reader 13.56MHz

FD-020-156 P60 white reader 13.56MHz



Surface mount or suitable for standard electric backbox.

Re

ad

an

d w

rite

All our keys are rated IP68 - IK08.

MIFARE® technology.



Management of the key colour into the software.

Operating temperature -20°C to +70°C.


Key uniqueness guarantee.


GB-010-010 Proximity key 13.56MHz black

FD-010-010 Proximity key 13.56MHz black (without logo)

FD-010-027 Proximity key 13.56MHz white

FD-010-028 Proximity key 13.56MHz blue

FD-010-029 Proximity key 13.56MHz red

FD-010-030 Proximity key 13.56MHz green

FD-010-078 Proximity key 13.56MHz yellow

FD-010-081 Proximity key 13.56MHz orange

FD-010-142 Proximity key 4K 13.56MHz

4K key, for events management.

FD-010-148 Combined remote control Prox 13.56MHz/RF 868MHz - 4 buttons

Remote control, key ring style including 2 channels frequency .



28/29


PROXIMITY KEYS

FD-500-336 Easy Door Controller demonstration panel

Presented on a light and aesthetic metal support, an Easy Door controller

and a mullion reader enable all required demonstrations.



Wire output.





Wire output.






Wire output.

Delivered without embedded box, with screw and tool.


OPTIONS

Re

ad

an

d w

rite

Re

ad

an

d w

rite

GB-140-166 Kit Easy Door Controller with mullion reader

GB-140-167 Kit Easy Door Controller with vandal resistant surface mount reader

GB-140-168 Kit Easy Door Controller with mushroom reader

Kit Easy Door Controller with 1 controller,

1 reader to choose and 10 colored keys.

GB-500-355 Easy Door Controller encoder 13.56MHz


Can encode keys and remote controls.

It is connected to the PC via a USB cord (supplied).

It contains a backup removable memory reader.



Credit card size.



30/31


CENTRALIZED MANAGEMENT FROM

A CONNECTED SOFTWARE.

THE CONTROLLER IS UPDATED IN REAL TIME.

ON

L

IN

EM

AN

AG

EM

EN

T

On

lin

eO

n l

ine

32/33

GB-120-006 GB-120-209

PASSAN PREMIUM

• Advanced features:

. Contact gate management (door forced, open too long)

. Anti pass back, anti pass time, counting, area presence

. Timetable keys, doors, lifts, display name on entry

panels, holiday periods

. Current events, stored and warning (pop-up or SMS via

Gprs optional)

. Interface with other trades via dry contacts (intrusion,

Passan Premium is a modular and stockable controller especially suited to medium and large residential community.

Thanks to its advanced features, the system is also suitable for small and medium commercial buildings such as

The controller can control up to two doors. Extension cards for doors 3/4 doors and 5/6 are used to increase the capacity

of the controller from two to six doors. Passan Premium can also be connected in network. 32 controllers maximum can

be connected together to control 192 doors.

Passan Premium is also characterised by the possibility to manage and combine the most diverse technologies to

be adapted to the diversity of needs. The controller can handle all types of readers : keypads, proximity readers, RF

receivers and is opened to any other technology via the optional Wiegand interface.

Passan Premium has a high level of reliability and exceptional security with a high protection of the software. Passansoft

software is designed for an easy use for non-specialized operator while providing comprehensive setup possibilities.

Prox 125 KHz or 13.56MHz 2 to 6 doors 2700 or 10 000

RF 433MHz or 868MHz per controller per site

- Great modularity

- Local or remote programming

- Diagnosis with leds: power, readers and connecting networks.

- 6000 events per controller

- Up to 32 controllers networked on 1000m, 192 doors in total,

- Management of readers, receivers, FDI 3 wire keypads and any other

technology via Wiegand Passan Premium interface

- Local or remote programming via RS232, modem or TCP/IP with option

- Permanent diagnosis via power and peripherals leds

- 2700 or 10 000 keys, 50 or 120 groups

- Operating temperature : 0°C to +50°C


SI

MPLE

ACCESS

CONTROL

LIFT

Passan Premium

Passan Premium

Passan Premium

Passan Premium

INTERCOM

Door 3+4 ext. module

FD-120-205 OR FD-120-206 OR FD-120-207

Manage up to 2 readers

Manage up to 2 readers and third party connected

systems (Alarm, detector, CCTV...)


Manage up to 4 readers and third party connected

systems (Alarm, detector, CCTV...)


Passan Premium Lift ext. module

Manage "oor access for

one or two lifts

Passan Premium

Manage "oor access for

one or two lifts and third

party connected systems

(Alarm...)

Passan Premium Intercom ext. module

Manage readers and

intercom on 2 entry panels

Manage readers and

intercom on 2 entry

panels and third party

connected systems

Input / Output ext. modules

FD-120-205 OR FD-120-206 OR FD-120-207

FD-120-205 OR FD-120-206 OR FD-120-207

FD-120-205 OR FD-120-206 OR FD-120-207

Passan Premium Intercom ext. module

Passan Premium

On

lin

e

Door 3+4 ext. module Input / Output ext. modules

Door 3+4 ext. module Door 5+6 ext. module

Lift ext. module Input / Output ext. modules

Input / Output ext. modules

On

lin

e

34/35

GB-120-006 Passan Premium controller - 2 700 keys - 50 key groups

GB-120-209 Passan Premium controller - 10 000 keys - 120 key groups

Dimensions (H x L x D) : 280mmx161mmx97mm

Controller 2 doors, expandable up to 6 with options (see below).

32 controllers networked can manage up to 32x6 doors so 192 doors.

6000 events.

Bus RS485 allowing the connection of 32 controllers on 1000m.

Connection to a PC via RS232, USB via adaptator (not supplied) or

TCP/IP with the optional module FD-500-267.

IP-20.

FD-120-210 Passan Flash memory for 10 000 users

Allows memory extension from 2 700 to 10 000 users.

Be careful : all the controllers of one site must have the same capacity.

FD-120-010 Door 3 & 4 extension module

FD-120-015 Door 5 & 6 extension module

Each controller can increase its capacity up to 6 doors

using extension modules.

Module FD-120-010 is used to increase the capacity of the controller to

4 doors and the module FD-120-015 up to 6 doors.

Possibility to connect up to 32 controllers in network

thereby increasing the capacity up to 192 doors in total.

FD-120-205 8 output extension module

FD-120-206 8 input extension module

FD-120-207 4 input / 4 output extension module

An input informs Passan Premium about the status of a device

Passan Premium inputs are based on the «all-or-nothing» mode (TOR).

On the other hand, Premium Passan is also able to control a device

or another system via an output.

For example, an intruder alarm, video recorder, etc.

Passan dry contacts are normally open (NO).

FD-120-208 Lift extension module

A Passan Premium controller dedicated to lift management can control

two risers and a maximum of 4 decoders.

GB-040-026 Floor decoder - relay box

Relay box of 10 outputs : for each output,

1 NO dry contact and 1 NC dry contact.

CONTROLLER

CONTROLLER OPTIONS


FD-120-046 Intercom extension module

The intercom extension module allows you to connect intercom entry panels

to Passan Premium.

A Passan controller can handle two entry panels and a maximum of

64 entry panels can be installed in network.

FD-040-015 Intercom decoder - relay box

Used with FDI standard entry panels.

Specially adapted for the renovation of audio intercom installations

1+n or 4+n.

Provides a decoder for 10 housings.

GB-040-021 Intercom video decoder - relay box

Used with FDI standard entry panels.

Specially adapted for the renovation of video intercom installations

without coax.

Provides a decoder for 10 housings.

GB-050-006 Passansoft (see pages 40/41)

CONTROLLER OPTIONS

SOFTWARE

Passansoft is ment for access control, elevator, intercom and video surveillance applications.

Passansoft offers various advanced functions:

- Key management :

From a single window, the user allows his keys to his sites. When he leaves this window, the software connects to all the

sites one after the other via modem or TCP/IP to update all the controllers.

- Automatic tasks :

Daily Passansoft connects to the sites and retrieves controllers events. The task can also sort out and send by e-mail these

events.

Automatic backup functions are also available :

- User management :

- Anti pass back, counting, area presence :

Passansoft screens provide information about the presence of people in areas of the site.

- Manual control :

- Event :

Passansoft displays events of controllers in real time or upon request.

- Warning :

For some events a popup opens in Passansoft. The event must be solved.

Passansoft can manage an unlimited number of local or remote sites.

The connection with controllers is achieved either in RS232 by cable (USB = optional serial) by modem or TCP/IP with

module FD-500-267.

A security key (dongle supplied) is required to authorize Passansoft to be connected to the controller network.

*1 with entry panels made by FDI Matelec

*2 with some DVR Urmet.

On

lin

eO

n l

ine

36/37

FD-020-080 Mullion reader 125KHz

GB-020-124 Mullion reader 13.56MHz


Wire gauge : 3 wires - 100m. Led bi-color red/green.

Buzzer on the 13.56MHz reader.

FD-020-084 Vandal resistant reader 125KHz

FD-020-142 Vandal resistant reader 13.56MHz


Wire gauge : 3 wires - 100m. Buzzer.

Bi-color led red/green + buzzer.

FD-020-006 OEM 40x40 reader 125KHz

FD-020-144 OEM 40x40 reader 13.56MHz

Frame dimensions : 40mmx40mm. OD dimensions : 60mmx60mmx16mm.


Bi-color led red/green.

FD-020-005 Stainless steel reader 125KHz

Frame dimensions : 110x110mm - Embedded box dim. : 94x94x30mm.


IP-53 rated.

FD-020-168 Sinthesi S2 reader 125KHz


Dimensions : 85mmx85mm.


FD-020-131 Sinthesi-Steel reader 125KHz

FD-020-149 Sinthesi-Steel reader 13.56MHz

Dimensions : 85mmx85mm.


FD-030-005 Mushroom reader 125KHz

Easy installation on existing support (drilling diam.25mm).

GB-020-020 RF receiver 433MHz

GB-020-021 RF receiver 868MHz

Allows to receive a radio signal transmitted by the following remote :

in 433MHz FD-010-015 and FD-010-047, in 868MHz : FD-010-021

and FD-010-048.

Reach of 20m without antenna and to 50m with antenna 433/868.

FD-020-135 Black P60 reader 13.56MHHz

FD-020-153 White P60 reader 13.56MHz



READERS / RECEIVERS / KEYPADS see tables pages 64/65


GB-010-012 Proximity key 125KHz grey - Dimensions : 49.5mmx36mmx7mm.

GB-010-010 Proximity key 13.56MHz black - Dimensions : 49.5mmx36mmx7mm.

FD-010-010 Proximity key 13.56MHz black (without logo) - Dimensions : 49.5mmx36mmx7mm

IP68 - IK08 rated.




FD-010-070 Pack of 10 cards ISO 125KHz



Proximity card in white plastic PVC.

Credit card size.



FD-010-147 Combined remote control Prox 125KHz/ RF 433MHz - 4 buttons

Remote control, key ring style including 4 channels frequency.



To use with RF receiver GB-020-020.

FD-010-148 Combined remote control Prox 13.56MHz/RF 868MHz - 4 buttons

Remote control, key ring style including 4 channels frequency .



To use with RF receiver FD-020-021.

PROXIMITY KEYS / REMOTE CONTROLS see table page 66/67

On

lin

eO

n l

ine

FD-025-081 Stainless Steel backlit keypad

Dimensions (L x H x D): 135mmx100mmx43mm.

Flush mount. Stainless steel frame 2,5mm thick.

Power supply : 12 Vac or 12 Vdc.

38/39

FD-500-267 RS485/ TCP/IP interface

To connect Passan Premium to an IP network.

Power supply :12Vdc.



Used to improve the reception distance.

To use with receiver GB-020-020 (433MHz)

and receiver GB-020-021 (868MHz).

FD-500-173 PSTN Modem

Used to be connected to Passansoft remotely

via a traditional PSTN phone line.

FD-500-028 GPRS RS232 Modem

(ex : broken door).

Requires a sim card and a M2M subscription.

GB-500-118 30 bits Wiegand interface

Used to connect a device to the 3 wires bus Passan

using Wiegand protocol or dataclock.

FD-500-268 USB encoder 125KHz

GB-500-045 USB encoder 13.56MHz


Can encode keys. It is connected to the PC via a USB cord (supplied).

It contains a backup removable memory reader.

FD-500-034 RS232 serial cable

Used to connect the controller to the PC.

Add interface FD-500-214 if the PC do not have serial port.

OPTIONS


FD-500-214 USB RS 232 adaptator lead

Used to connect the controller to the computer when there is no serial port

on the computer (in addition to cable FD-500-034).

FD-500-191 Repeater RS485

Can extend the maximum cable distance network : up to 2000m

FD-500-043 232-485 adaptator

Can extend the maximum cable distance : up to 1000m

Works in pairs.

GB-500-005 Stainless steel push button diam. 19mm


Wire output.





Wire output.






Wire output.

Delivered without embedded box with screw and tool.


70-000-457 Power supply 12V/1A

Dimensions (H x L x D) : 97mmx17mmx70mm.

Din rail mounting (1 module).

OPTIONS

On

lin

eO

n l

ine

40/41

- Simple and intuitive software

- Management of keys, access groups to doors and

access group to lifts

- Current events, stored or warning

- Anti-Pass back, counting and presence area

- Interface with other devices or trades via inputs and outputs

- Integration of the intercom based on entry panels from FDI

- CCTV integration

Passansoft is a simple and intuitive software that allows the management and access control system Passan Premium.

It is designed for an easy use by an unskilled operator, while providing large setup possibilities.

Passansoft software allows to manage an unlimited number of sites on a single computer.

The software allows backup copies of sites. 4 levels of software access code can be used: administrators, managers, users

and guests to increase the security of the site.

The fonctionning license ‘dongle’ is required for each installation.

Two connection modes are available:

1000m with 2 interfaces (FD-500-043).

- Remotely : TCP / IP network via Internet or Intranet or via telephone using the FDI modem (FD-500-173)

Passansoft covers all the requirements of small and medium commercial sites.

Minimum computer requirements :

• Works with Windows XP / Vista / Seven/Win-

dows 8

• RAM : 1 Gb or more - 1 GHz or more

• Free space : 8Go on harddisk

• Resolution : 1024 x 768

GB-050-006

PASSANSOFT


DIRECT ACCESS TO MAIN FEATURES

DIRECT ACCESS TO MULTI-SITE PASSANSOFT

PASSANSOFT IN JUST ONE CLICK !

Key management :

permissions, contact information, comments, pictures in jpeg format). Export to a

Group management : up to 50 groups with personal permissionshours.

Event in real time : Manage up to 50 types of events. The software allows to follow:

the events on site, the events managed I/O, system status and the status of network

connections.

Possibility of differentiating event processing: simple report on time with online

viewing, alarm storing or trigging.

Video in real time

Anti pass back prevents a user to use a key twice on the same reader. For example,

impossible to take the key from an employee.

The anti pass time is an anti pass back time-limited.

Passansoft manages the anti pass back only on the inputs. In this case, the output is

always free. Example: a parking.

The counting is used to limit the number of people in an area. Passansoft manages

the next two are informative, and when the last level is reached, no more key is

allowed to enter.

Actions can be triggered at the crossing of levels.

Passansoft includes original FDI entry panels. The Passansoft user then manages

the access control, intercom, lift and CCTV from the same software.

In addition, Passan Premium provides the link between the intercom and lift. Thus,

when the resident called by the intercom opens the door to the visitor, the controller

GET MORE WITH P-ALERT ...P-Alert:

P-Alert is used to monitor remote sites. A warning message will appear on your

computer to inform you that something is happening on a site under surveil-

lance.

P-Alert is used with Passansoft.

GET MORE WITH P-ALERT ...P-Alert:

P-Alert is used to monitor remote sites. A warning message will appear on your

computer to inform you that something is happening on a site under surveil-

lance.

P-Alert is used with Passansoft.

On

lin

eO

n l

ine

42/43

UI-500-346 / UI-500-347

IPERVOICE ACCESS CONTROL

The new IPervoice access control called PIO controller is compatible with IPervoice release 4.1 and above. It consists of

a 2 door base controller ref UI-500-346 which is connected to an IP LAN Interface ref UI-500-354. Two Wiegand readers

can be connected to the base controller. A 2 door expansion card ref UI-500-347 can be stacked on the base unit to

increase the capacity up to four doors.

For each door, the following can be connected:

- a Wiegand reader (up to 9 wires including 3 LED + buzzer + hold),

- a RTE push button,

- a door contact,

- a dry contact C, NO, NC to activate an electrical lock or a mag lock.

The PIO controller base module always has to be connected to the IP LAN interface. Both products operate together

and can be considered as a single unit. All access permissions are saved in the IP interface so that, in case the server

is down, access is still granted by the IP interface via a battery back-up.

Prox 13.56MHz

RF 868MHz

- 2 readers per controller base + 2 readers per expansion card

Max. 4 readers in total per IP LAN interface.

- Storage of the access permissions inside the IP LAN interface.

- Management of Wiegand readers, receivers or keypads.

- 100 meters between readers and controller.

- DIN rail mounting (or simply by screws).

- Operating temperature : -20°C to +60°C.


-

-

-

placed close to the doors and the IP module close to the TCP/IP network.

A wide range of readers are available for the PIO controller: proximity readers with or without Urmet design, RF reader as

well as keypads. All FDI/Urmet MIFARE® keys are compatible. 4 button RF fobs are also available if used with the FDI 34bit

Wiegand RF receiver.

p

A wide

UI-500-346 IPervoice 2 door PIO Wiegand controller

Controller 2 doors, expandable up to 4 with optional card.

Dimensions: 210 mm x 145 mm x 65 mm (cover included)

or 10 Din rail modules.

Requires 12 to 24VAC-VDC PSU.

UI-500-347 IPervoice 2 door PIO Wiegand expansion card for PIO controller

Expansion card to increase the PIO capacity to 4 doors.

Powered by base controller.

UI-500-354 IPervoice IP LAN interface for PIO controller

Dimensions: 70 mm x 90 mm x 75 mm or 4 DIN rail modules.

Requires 12 to 24VAC-VDC PSU.

CONTROLLER


Power supply : supplied by the controller.

Reader connection : 100m max from the PIO.

Read range : according to the reader.

Operating temperature : -20° to +60°C.

GB-020-097 Wiegand mullion reader black 13.56MHz - 34 bits - 5 wires

Dimensions (LxHxD) : 78mm x 43mm x 17mm.

GB-020-098 Wiegand vandal resistant reader 13.56MHz - 34 bits - 5 wires


FD-020-167 Wiegand panel mount reader 13.56MHz - 34 bits - 5 wires

Window dimensions : 40mm x 40mm.

FD-020-160 Sinthesi Steel Wiegand reader 13.56MHz - 34 bits - 5 wires


FD-020-171 Sinthesi S2 Wiegand reader 13.56MHz - 34 bits - 5 wires


Cover


44/45

FD-020-157 OEM Wiegand reader for Elekta Steel call module 13.56MHz - 34 bits - 5 wires

Plastic dimensions (LxWxD) : 80mm x 50mm x 27mm (terminals included).

FD-020-161 OEM Wiegand reader for Elekta Glass call module 13.56MHz - 34 bits - 5 wires

Dimensions (LxWxD) : 80mm x 50mm x 27mm.

Power supply :12 VDC /50mA (supplied by the controller).

FD-020-137 P60 black Wiegand reader 13.56MHz - 34 bits - 8 wires


FD-020-154 P60 white Wiegand reader 13.56MHz - 34 bits - 8 wires


FD-020-044 Wiegand receiver 868MHz - 34 bits - 4 wires - 1 channel

the remote control.


FD-500-036 Optional antenna to increase the RF range

FD-025-082 Stainless Steel Wiegand backlit keypad - 5 wires


2,5mm Stainless Steel.

Flush mount keypad (embedding box including).

Large braille buttons Ø16mm.



GB-010-010 Proximity black key 13.56MHz

Dimensions : 49.5mm x 36mm x 7mm.

IP68 - IK08 rated.


Engraving of a 8 digit alphanumerical number and counterboring to prevent erasure.

Key uniqueness guarantee. Customization on request. Exist in different colours.


Card dimensions : 85mm x 54mm x 1mm.

Proximity card in white PVC.

Credit card size.



FD-010-148 Combined remote control - Prox. 13.56MHz/RF 868MHz.

Dimensions (L x H x D) : 79mm x 38mm x 12mm.

Simplified programming thanks to a common serial N° for proximity and RF.

Engraving of a 8 digit alphanumerial number.

Average life of the battery : 22000 manipulations.


GB-500-045 USB encoder 13.56MHz

Dimensions : 130mm x 105mm x 30mm.

It is connected to the PC via a USB cord (supplied) and is used to enrol keys, cards

and remote controls.

PROXIMITY KEYS / REMOTE CONTROLS


OPTIONS

46/47

FD-144-001

TRANSIT IP

- 5000 keys / 100 groups / 5 administrator access /

20 timeslots / 20 holiday periods / 16 voicemails

- Per door : 1 relay, 1 entry BP, 1 door contact, 1 reader

- Map option: 2 analog inputs with end of line resistor

+ 2 outputs that can be customized

- Embedded web server

- 2 wires between reader <=> controller, distance max. 100 m

- Sending messages (alerts by e-mail after an event or pre-

programmed report)

- SAS Mode (example: building input)

- Power supply : POE or 12/24 Vac/Vdc

• An embedded Web server friendly and intuitive

. No software to install

. Easy update via IP

. Remote door opening (impulse or hold)

. Multi-user (login of several users to the controller)

• A cost saving solution

. Use of an existing IP network

. Remote checking, management and maintenance

. Off site control of the devices working status

• High security

. View of the events and management in real time

. Access granted with a key, a code or key+code (secured mode)

. Management of «anti-panic code»

. Key cancellation in real time

. Possible link to 2 IP video cameras (not included)

• A wide range of readers

. Proximity reader 13.56 MHz MIFARE®

. With or without keypadd

. Customizable voice messages. Examples: «access denied», «access granted»

. 3 programmable status leds (red, orange and green).

13.56MHz MIFARE® 2 input doors 5000 per site

or 1 door

input/output


D D A C O M P L I A N T

TRANSIT IP LECTAUTO• An all in one solution

One product :

the functions of a controller and a reader managing access control

• Easy to use and to install

. Less wiring : intelligence at the door;

Release of the exit push button, the door contact and the lock.

Local supply 12-24 Vac/Vdc

. Easy installation and time saving with its adapter panel (FD-500-274) for standard 60 mm

electric backboxes

• Technical features

. ISame features as the Transit IP controller, but with 1 door instead of 2,

1 analog input + 1 output

. Available with or without keypad

. Customizable voice messages. Example : «access denied», «access ganted»

. Accessory : surface mount bracket for standard electric backboxes of 60 mm

TRANSIT IP :

A USER-FRIENDLY AND INTUITIVE WEB EMBEDDED SERVER

A COST SAVING SOLUTION EASY TO USE

ADVANCED FUNCTIONS

A HIGH SECURITY

On

lin

e

TRANSIT IP LECTAUTO

On

lin

e

TRANSIT IP

48/49

FD-144-001 Transit IP controller 2 doors - Power supply 12/24 Vac/Vdc

FD-144-002 Transit IP controller 2 doors - POE power supply

FD-144-003 Transit IP controller 2 doors

Fixed by screws to the rail DIN.

Power supply : 12 to 24 Vac or Vdc.

FD-144-004 Optional card for Transit IP - 2 input/2 output

Dimensions (HxLxD) : 176mmx51mmx25mm.

Installation on a Transit IP base (1 per controller).

Indoor reader 13.56 MHz - 2 wires - 100m

FD-020-100 Terminal connection

FD-020-107 Pigtail connection


Power supply 12V supplied by the controller.

Indoor reader 13.56 MHz - 2 wires + audio (voice mails) - 100m





Indoor reader 13.56 MHz - 2 wires + audio (voice mails) + keypad - 100m





FD-144-005 Kit controller Transit IP POE + 2 readers + 50 ISO cards

TRANSIT IP


FD-144-010 Standalone controller/reader 13.56 MHz

Power supply : 12/24 Vac/Vdc

FD-144-013 Standalone controller/reader 13.56 MHz with WIFI option


+ voice messages

Equivalent to FD-144-010 + voice messages.

FD-144-014 Standalone controller/reader 13.56 MHz + voice messages + WIFI option


+ voice messages + keypad

Equivalent to FD-144-011 + keypad.

FD-144-015 Standalone controller/reader 13.56 MHz + voice messages + keypad

+ WIFI option

FD-500-274 Base plate for TRANSIT IP LECTAUTO

GB-010-010 Proximity key 13.56MHz

FD-010-010 Proximity key 13.56MHz (without logo)

IP68 - IK08 rated.







Proximity card in white plastic PVC.

Credit card size. Remote control uniqueness guarantee.



TRANSIT IP LECTAUTO - ALL IN ONE

ACCESSORIES

KeKeKey uniqueueneness guaranteeee Customomizatation onon reqequest

On

lin

eO

n l

ine

50/51


ALL PERIPHERALS OR OPTIONAL DEVICES FOR

ACCESS CONTROL.

TH

EA

CC

ES

SO

RI

ES

Acc

ess

ori

es

Acc

ess

ori

es

52/53

READERS 125KHZ

FD-020-084 VANDAL RESISTANT SURFACE MOUNT READER 125KHz - 3 WIRES

Dimensions (L x H x D) : 100mmx45mmx16mm

Power supply : 12 Vdc (supply by the controller)

Current : 30mA

Wire gauge : 3 wires / 100m max

Reading distance : up to 15 mm

Buzzer

Operating temperature : -10° to +50°C

L+ L0 LD

L+

L0

LD

The vandal resistant surface mount reader is a 125KHz proximity reader

used with Passan Premium and Transit controllers. Elegant and durable, it

commercial properties and residential housing.

Functioning :

Led of the reader is red when it is ready to read a proximity key. When a key is

key is valid the led turns green during the programmed door release time .

FD-020-080 MULLION READER 125KHz - 3 WIRES



Current : 30mA




L+

L0

LD

The mullion reader is a proximity reader 125KHz working with Passan

Premium and Transit controllers. It sits directly on a wall without embedded

Functioning :

A two-color led indicates the operating status of the reader: red to indicate

that the reader is in use and green when the door is controlled and give the

permission to enter.


FD-020-006 OEM 40X40 READER 125KHz - 3 WIRES

Dimensions (L x H x D): 60mmx60mmx20mm


Current : 30mA




FD-020-168 SINTHESI S2 READER 125KHz - 3 WIRES

Frame dimensions : 85mmx85mm.

Reader with Sinthesi frame/Sinthesi S2 frame.

Two-color LED indicating the operating status of the reader : red to indicate that

the reader is in use and green when the door is controlled.

FD-020-131 SINTHESI STEEL READER 125KHz - 3 WIRES


Reader with Sinthesi Steel frame.

Two-color led indicating the operating status of the reader : red to indicate that


FD-020-005 STAINLESS STEEL READER 125KHz - 3 WIRES

Frame dimensions (H x L): 110mmx110 mm.

Embedded box dimensions (H x L x D): 94mmx94mmx30mm.

Installed in an embedded box with 316L stainless steel front plate.

Fixed by vandal resistant screw.



IP-53 rated.

The OEM 40x40 reader is a proximity reader 125KHz working with Passan

Functioning :

Led of the reader is red when it is ready to read a proximity key. When a key

if the key is valid the led turns green during the programmed door release

time.

5

Acc

ess

ori

es

Acc

ess

ori

es

54/55

READERS 125KHZ

FD-030-005 MUSHROOM READER 125KHz - 3 WIRES

Dimensions (L x H x D) : 71.6mmx60.6mmx17mm

Ideal for renovation (drill diameter 25mm)

Power supply : supplied by the controller

Wire gauge : 3 wires


IP 53 rated

Fireproof ABS box

Operating temperature : -20°C to +70°C

FD-020-020 RF RECEIVER 433MHz - 3 WIRES

(Exist in 868MHz part number. FD-020-021)


Power supply : 12 Vdc (supplied by the controller)


Entry : dry contact

Reading distance : up to 50 m with optional antenna

Antenna 433MHz in option (Part number : FD-500-025)


REC433 RF receiver is used with Passan controller.

It is designed to received a radio signal from a remote control FD-010-015. No

A led called ‘environment’ gives you information about the electromagnetic

environment. When the led is off, there is a high quality RF reception. But when

the light is on, the environment has electromagnetic disturbances.

A led indicates when the RF reader received a signal from a FDI RF transmitter.

Another led indicates if there is a good communication between reader and

controller.

ANT+B-B+LDL-L+ ANT-

pont

Rec OK

Environment

Antenne HF 433MHz en option

L+

L-

LD

The mushroom reader 125KHz is small, vandal resistant and waterproof,

which makes it ideal for external applications.

The reader can easily be installed on any type of panels. It adapts to all drill

diameter 25mm.

RECEIVERS 433MHZ


KEYPAD READERS

FD-025-081 I3 STAINLESS STEEL BACKLIT KEYPAD - 3 WIRES



Large backlit Braille buttons diameter 16mm, blue leds.

Removable terminal connections, led and operation buzzer.

Rain hood to adapt it as surface mount in option (pn: 60-030-277).

Power supply : via the controller

Acc

ess

ori

es

The I3 keypad is DDA compliant and has advanced features such as a clock input to manage code group or

monostable and bi-stable modes by code.

On the other hand, this keypad offers two relays plus one open collector output.

Finally, by its anti vandal appearance, this keypad is suitable for multiple residential and commercial applications. A

cce

sso

rie

s


56/57

READERS 13.56MHZ

FD-020-086 VANDAL RESISTANT SURFACE MOUNT READER 13.56MHz - 2 WIRES


Power supply : 12V CC (supplied by the controller)

Current : 50mA

Reader connection <-> Controller : 2 wires / 100m max



Buzzer

The mullion reader is a proximity reader 13.56MHz working with Easy Door

V2 controllers. It sits directly on a wall without embedded box. It offers a

Functioning :

A two-color led indicates the operating status of the reader: red to indicate

that the reader is in use and green when the door is controlled and give the

permission to enter.

The vandal resistant surface mount reader is a 13.56MHz proximity reader used

with Easy Door V2 controllers. Elegant and durable, it is ideal for indoor and outdoor

housing.

Functioning :

Led of the reader is red when it is ready to read a proximity key. When a key is presented

turns green during the door release time programmed.

FD-020-081 MULLION READER 13.56MHz - 2 WIRES



Current : 100mA




L+ L-

L+

L-


FD-020-007 OEM 40X40 READER 13.56MHz - 2 WIRES



Current : 50mA



Operating temperature : -20°C to 70°C

5

Functioning :

Led of the reader is red when it is ready to read a proximity key.

key is refused and if the key is valid the led turns green during the

door release time programmed.

Acc

ess

ori

es

Acc

ess

ori

es

FD-020-176 SINTHESI S2 READER 13.56MHz - 2 WIRES


Reader with Sinthesi frame/Sinthesi S2 frame.

Two-color LED indicating the operating status of the reader : red to indicate that


FD-020-132 SINTHESI STEEL READER 13.56MHz - 2 WIRES

Frame dimensions : 85mmx85mmx16mm.

Reader with Sinthesi Steel frame.



FD-020-016 STAINLESS STEEL READER 13.56MHz - 2 WIRES

Frame dimensions (H x L): 110mmx110 mm.

Embedded box dimensions (H x L x D): 94mmx94mmx30mm.

Installed in an embedded box with 316L stainless steel front plate.

Fixed by vandal resistant screw.



IP-53 rated.

58/59

READERS 13.56MHZ

FD-020-175 MUSHROOM READER 13.56MHz - 2 WIRES EASY DOOR

Dimensions : diameter 34mm, high 30 mm

Ideal for renovation (drill diameter 25mm)


Reader connection <-> Controller : 2 wires / 100m max (for FD-030-065)


IP 53 rated


The mushroom reader 13.56MHz is a compact and vandal resistant reader which al-

lows reading of proximity keys for residents and proximity card VIGIK for external agent

(La Poste ,EDF-GDF, France Télécom…)

Waterproof, this reader is ideal for an outside use. This reader can easily be installed

FD-020-135 / FD-020-139 P60 READER 13.56MHz - 2 WIRES


Surface mount or suitable for standard electric backbox




IP 53 rated



RECEIVERS 868MHZ

FD-020-023 RF RECEIVER 868MHz - 2 WIRES

(Exists in 433MHz part number. FD-020-022)




Entry : dry contact

Reading distance : up to 50 m with optional antenna

Antenna 868MHz in option (Part number : FD-500-025)


ANT+B-B+L-L+ ANT-

pont

Rec OK

Environment

Antenne HF 868MHz en option

L+

L-

REC868 RF receiver is used with Vitwo controller.

It is designed to receive a radio signal from a remote control FD-010-148.

A led called ‘environment’ gives you information about the electromagnetic environment.

When the led is off, there is a high quality RF reception. But when the light is on, the

environment has electromagnetic disturbances.

A led indicates when the RF reader received a signal from a FDI RF transmitter.

Another led indicates if there is a good communication between reader and controller.

1104/514 868MHz RF READERRECEPTEUR REC868

Acc

ess

ori

es

Acc

ess

ori

es

Antenna RF 868MHz

in option

60/61

WIEGAND READERS AND RECEIVERS

Full range of Wiegand readers and receivers

Compatible with all the controllers compatible with Wiegand

protocol.

Customization possible (26, 32, 34 bits etc) on request.

Work with proximity keys FD-010-012, dual technology remote

controls FD-010-147 and ISO cards FD-010-070.

Maximum distance for wiring between the controller and the

reader : 100m

Wire gauge : 5 wires to the controller.

Operating temperature : -20°C to 60°C.

Wiegand is a standard protocol. Wiegand readers are compatible with most access control systems that accept 30 bits.

They are used with FDI keys. FDI can develop upon request readers in 26 bits, 30 bits, 34 bits or more. Do not hesitate

to contact us!

FDI Wiegand readers make the site administration easier with a unique key solution. Using the RF receiver to allow

vehicles access to a car park, it is possible to use the remote dual-technology FDI with its built-in proximity tag to use

with proximity readers.

Wiegand receivers need to be connected to controllers that are compatible with Wiegand protocol. The serial number

of the remote must be entered only once into the controller.


Any

Controller 30 Bits

Wiegand Input

FDI Wiegand

receiver

FDI Wiegand

proximity reader

FD-025-082 I3 STAINLESS STEEL BACKLIT KEYPAD - 2 LEDS



Large backlit Braille buttons diameter 16mm, blue leds.

Removable terminal connections, led and operation buzzer.

Rain hood to adapt it as surface mount in option (pn: 60-030-277).

FD-020-085 Wiegand vandal resistant surface mount reader 125KHz - 30 BITS

GB-020-098 Wiegand vandal resistant surface mount reader 13.56MHz - 34 BITS


Power supply : 12 Vdc


Wire gauge : 5 wires / 100m to controller max

FD-020-083 Wiegand mullion reader 125KHz - 30 BITS

GB-020-097 Wiegand mullion reader 13.56MHz - 34 BITS





FD-020-047 Wiegand OEM 40x40 reader 125KHz - 30 BITS

FD-020-167 Wiegand OEM 40x40 reader 13.56MHz - 34 BITS





FD-020-171 Wiegand Sinthesi S2 reader 13.56MHz - 34 BITS





FD-020-141 Wiegand Sinthesi Steel reader 125KHz - 26 BITS

FD-020-160 Wiegand Sinthesi Steel reader 125KHz - BITS





FD-020-014 Wiegand stainless steel reader 125KHz - 30 BITS





FD-020-041 Wiegand RF receiver 125KHz - 34 BITS

FD-020-038 Wiegand RF receiver 125KHz - 37 BITS



Reading distance : up to 50m with optional antenna


Antenna 433/868MHz

Acc

ess

ori

es

Acc

ess

ori

es

FD-020-137 Black Wiegand P60 reader 13.56MHz - 34 BITS

FD-020-154 White Wiegand P60 reader 13.56MHz - 34 BITS


Power supply : 12 Vdc. Reading distance : up to 30 mm


62/63

FD-010-070 PACK OF 10 CARDS ISO 125KHz

FD-010-051 PACK OF 10 CARDS ISO 13.56MHz


Technology : 125KHz / 13.56MHz

Engraving of a 8 digits alphanumerical number

Credit card size


Reading distance of 6cm depending on the reader


ISO proximity cards have a unique serial number and are coded in factory, 4

billion combinations are possible. It can be customized with a logo and / or

a photo.

Packs of ISO cards FD-010-070 are compatible with all FDI 125KHz readers

and packs of cards FD-010-051 are compatible with all FDI 13.56MHz

readers.


GB-010-012 PROXIMITY KEYS 125KHz grey

Dimensions (L x H x D) : 49.5mmx36mmx7mm

GB-010-010 PROXIMITY KEYS 13.56MHz black

FD-010-010 PROXIMITY KEYS 13.56MHz black (without logo)

Dimensions (L x H x D) : 49.5mmx36mmx7mm

Technology : 125KHz / 13.56MHz

IP68 - IK08 rated

Engraving of a 8 digits alphanumerial number

Counterbore to prevent erasure of the number

Reading distance of 4cm depending on the reader


The proximity keys are IP68 and IK08 rated (waterproof and shock resistance).

They have a metal eyelet to be placed on a key ring and contain a code which

Possibility of personalization by printing or molding of the hull.

The proximity keys FD-010-012 are compatible with all FDI 125KHz readers and

keys FD-010-010 with all FDI 13.56MHz readers.

PROXIMITY KEYS, ISO CARDSAND REMOTE CONTROLS

36mm

49

.5m

m

FD-010-147 COMBINED REMOTE CONTROL 125KHz/433MHz - 4 yellow buttons

FD-010-148 COMBINED REMOTE CONTROL 13.56MHz/868MHz - 4 blue buttons


Simplified programming thanks to a common serial N° for proximity and RF

Engraving of a 8 digit alphanumerical number

Average life of the battery : 22000 manipulations


and reinforces your image to the daily lives of users.

Range of modern, ergonomic forms, integration of brands, logos, button icons, we do our utmost to satisfy you.

Contact us for a quote !

ion of fy our utmost to satisfy fy satisfy

CUSTOMIZATION

Thanks to the integrated proximity and two buttons, the remote is adapted to many situations. It is no longer

necessary to have a remote plus a key, for example, a button can control a gate, the second one manages the

garage door and the proximity is used for pedestrian access.

The remote controls are designed to last thanks to a metal eyelet for key ring, the engraving of the serial number

For read only remotes :

These remotes are added into the software by entering the engraved N° or presentation of the remote control on

an encoder.

Only for read and write remotes :

The remotes have a metal eyelet to be placed on a key ring. It contains a code of 8 hexadecimal words which can

Acc

ess

ori

es

Acc

ess

ori

es

64/65

READERS

Mullion Vandal resistant OEM

Readers

3 wires

Passan

Transit

Readers

5 wires

Wiegand

or Dataclock

Readers

2 wires

Easy Door

Controller

Readers

2 wires

Ipervoice

Easy Door

Controller V2

12

5 K

Hz

12

5 K

Hz

12

5 K

Hz

13

.56

MH

z1

3.5

6 M

Hz

13

.56

MH

z1

3.5

6 M

Hz

FD-020-080 FD-020-084 FD-020-006 FD-020-005

GB-020-124 FD-020-142 FD-020-144 FD-020-177

FD-020-081 FD-020-086 FD-020-007 FD-020-016

FD-020-118 (terminal)

GB-020-122 GB-020-123 GB-020-126

Wiegand 26 bits FD-020-087



Data/clock FD-020-082








Data/clock

Wiegand 26 bits


Wiegand 34 bits


Wiegand 26 bits

Wiegand 30 bits

Wiegand 34 bits GB-020-097

Data/clock

Wiegand 26 bits

Wiegand 30 bits

Wiegand 34 bits GB-020-098

Data/clock

Reader without led


FD-020-117(terminal) FD-020-093 (pigtail)

Stainless steel


Acc

ess

ori

es

Acc

ess

ori

es

P60

FD-020-168 FD-020-131 FD-030-005 FD-020-174 (Steel)

FD-020-170 FD-020-149 FD-020-135 FD-020-153 FD-020-158 (Steel)

FD-020-176 FD-020-132 FD-020-175 FD-020-139 FD-020-156 FD-020-166

es

es

es

es

es

es

FD-020-169 FD-020-133 GB-020-140 FD-020-138 FD-020-155

A A A A A A A A A A A A A A A A A A A A A Acccccccccccccccccccc

Wiegand 34 bits Wiegand 34 bits

FD-020-141 FD-020-172

Wiegand 34 bits Wiegand 34 bits Wiegand 34 bits Wiegand 34 bits Wiegand 34 bits

FD-020-171 FD-020-160 FD-020-137 FD-020-154 FD-020-157 (Steel)

Reader 8 wires Reader 8 wires FD-020-161 (Glass)

black whiteSinthesi S2 Sinthesi Steel “Mushroom” Elekta

66/67

RECEIVERS AND REMOTE CONTROLS

Receiver

3 wires

Passan

Receiver

2 wires

Ipervoice

Vitwo

43

3 M

Hz

43

3 M

Hz

86

8 M

Hz

86

8 M

Hz

GB-020-020 FD-010-147 - 4 buttons (125KHz)

GB-020-021 FD-010-148 - 4 buttons (13.56MHz)

FD-020-023 FD-010-148 - 4 buttons (13.56MHz) FD-010-148 - 4 buttons (13.56MHz) FD-010-021 (125KHz)

FD-020-022 FD-010-147 - 2 buttons (13.56MHz) FD-010-148 - 2 buttons (13.56MHz) FD-010-147 - 4b (125KHz)

FD-010-148 - 4 buttons (13.56MHz)

Vitwo LS Vitwo LE Ipervoice


Receivers

4 wires

Wiegand

or Dataclock

43

3 M

Hz

86

8 M

Hz


Wiegand 30 bits UG-020-037


Data/clock

FD-010-147 (125KHz)

FD-010-147 (125KHz) FD-010-047 (13.56MHz)


Wiegand 30 bits UG-020-043



Data/clock

FD-010-021 (2 buttons - 125KHz)

FD-010-021 (2 buttons - 125KHz)

FD-010-148 (13.56MHz) FD-010-148 (13.56MHz)

FD-010-148 (13.56MHz)

Acc

ess

ori

es

Acc

ess

ori

es

68/69

BUTTONS

FDI part number GB-500-250 GB-500-252 GB-500-254 FD-500-009 FD-500-010

Front dimensions 40 X 100 60 X 100 90 X 90 40 X 40 60 X 100

Front thickness 15 / 10 15 / 10 15 / 10

Material and

Finish

Stainless steel 304L -

Brush


Brush


Brush

Stainless steel Stainless steel

Using place Embbeded electric box

diameter 60

Fixing By screw not supplied By screw not supplied By 2 vandal resistant

screws supplied + tool

From the rear

(nut supplied)

From the front

(screw supplied)

Fixing drill 2 x Ø4.3 unmilled 2 x Ø4.3 unmilled 2 x Ø3.5 milled

Type of button NO/NC - Ø19 -

Not backlit

NO/NC - Ø19 -

Not backlit

NO/NC - Ø19 -

Not backlit

NO/NC - Ø19 -

Not backlit

NO/NC - Ø19 -

Not backlit

Laser engraving

«DOOR»

YES YES YES Engraving on request Engraving on request

NOT BACKLIT PUSH BUTTONS

FDI part number GB-500-259 FD-500-260

Front dimensions 60 X 100 without

Front thickness 15 / 10 /

Material and finish Stainless steel 304L - Brush /

Using place /

Fixing By screw not supplied Bolt supplied

Fixing drill 2 x Ø4.3 Unmilled

Type of button NO/NC - Ø25 - backlit NO/NC - Ø25 - backlit

Laser engraving

«DOOR»

YES /


BACKLIT PUSH BUTTONS

FDI part number GB-500-257 GB-500-258

Front dimensions 90 X 90 60 X 100

Front thickness 15 / 10 15 / 10

Material and finish Stainless steel 304L - Brush Stainless steel 304L - Brush

Using place

Fixing By 2 vandal resistant screws +

tools

By screw not supplied

Fixing drill 2 x Ø4.3 unmilled 2 x Ø4.3 unmilled

Type of button NO/NF - Ø19 -

Not backlit

NO/NF - Ø25 -

Not backlit

Laser engraving «DOOR» YES YES

«Braille» YES YES

Green led YES YES

Connected buzzer card YES YES

PUSH BUTTONS FOR IMPAIRED

Acc

ess

ori

es

Acc

ess

ori

es

70/71

ELECTROMAGNETIC LOCK

FD-500-227 ELECTROMAGNETIC LOCK WITH MORTICE MOUNT 300 KG

Technical features :

- European standards (CE)

- Voltage input : 12 VDC / 24 VDC

- Power consumption : 12VDC = 480 mA

24VDC = 240 mA

- Dimensions L x w x h:

• Magnet 226 x 38 x 26.5 mm

• Counterplate 180 x 38 x 11 mm

- Holding force : 300 kgs (600 lbs)

The product includes :

• 1 electromagnetic lock

• 1 counterplate

• 1 sticker to mount the counterplate

1 counterplate bolt to mount the product.


FD-500-228 ELECTROMAGNETIC LOCK SURFACE MOUNT WITH LED 300 KG



• 1 counterplate


counterplate bolt to mount the product.

• Bracket L shaped (Part number. 60-001-070)

• Bracket L and Z shaped kit (Part number. 60-001-068)

FD-500-229 ELECTROMAGNETIC LOCK SURFACE MOUNT WITH LED 550 KG



• 1 counterplate


counterplate bolt to mount the product.

• Bracket L shaped (Part number. 60-001-069)

• Bracket L and Z shaped kit (Part number. 60-001-067)

Acc

ess

ori

es





24VDC = 240 mA


• Magnet 250 x 42 x 25 mm



- With integrated led and NO/NC contacts





24VDC = 240 mA


• Magnet 266 x 67 x 39 mm



- With integrated led and NO/NC contacts

Acc

ess

ori

es


72/73

PSTN PANELS

AND PUSH BUTTON ENTRY PANELS

TH

EE

NT

RY

P

AN

EL

S

Pa

ne

lsP

an

els


74/75

GB-601-076 & GB-601-077

PSTN PANELS

GB-601-076 AUDIO PSTN PANEL WITH GRAPHICAL DISPLAY (430 x 175mm)

GB-601-077 AUDIO&VIDEO PSTN PANEL WITH GRAPHICAL DISPLAY (430 x 175 mm)

- Stainless steel panel 2.5mm thick including a proximity reader 40*40 13.56 MHz

- Works with a standard analog phone line (PSTN or PABX)

- In compliance with disabilities act with Braille buttons and speech sinthesis

- 1000 users including for each one :

. 2 phone numbers

. 1 access code

. 1 proximity key

- Three relays controlled from the phone called

- 30000 last events

- Advanced functions

. Free access on door, time display for scrolling names

. Management door contact, door opened too long and forced door

phone number

. Management of talk time for each resident

. Personalization of logos

- Programming with Platel software FD-050-083 (supplied)

- Optional : surface mount box and rain hood (60-030-266)

- Power supply from 12 to 24 VDC or VAC

PSTN panels advantageously replace traditional intercom systems in residential applications either because of long

distances between the entry panel and the apartments, either because it is no longer possible to switch cables between

the entry panel and each apartment.

In this case, panels calls reach one or several positions and programming of the PABX allows all possibilities in call

management.


PSTN network

or

2 wires

2 wires

2 wires

2 wires

DOOR

BP

Progamming

software

FD-050-083 PLATEL

- Management of PSTN panels remotely via modem (not supplied).

- No limit in quantities of sites and panels.

- Setting and complete management of the panels :

. Transfer from and to remote panels

. Events recovery.

- Programming of the keys by manual entry or presentation on the

optional encoder GB-500-045.

- Exist in French and English (language to choose at the installation).

Pa

ne

lsP

an

els

76/77

FDI ACCESS CONTROL OVER THE WORLD...

Residential housing

SLOVAKIA

Rhodes Waterside

AUSTRALIA

Viva Condominium

SINGAPORE


French Ambassy

SLOVAKIA

OUR SALES SUPPORTS...

Our web site

Our new web site www.fdimatelec.com is at your disposal to :

. Discover FDI and our distributors.

. Know the news about access control.

Demonstration panels and cases

To present our products, we have connected material such as cases or demonstration panels.

Feel free to contact us for any question.

An online version of our general catalogue

Available on line or upon request.

Trilight Condominium

SINGAPORE

Residential housing

SLOVAKIA

78

NOTES

FDI MATELEC

Route de Saint Symphorien

85130 Les Landes Génusson

FRANCE

Tel: +33 2 51 61 69 69

Fax: +33 2 51 61 69 68

www.fdimatelec.com


G E N E R A L CATALOGUE - URMET · G E N E R A L CATALOGUE. FDI MATELEC 1 G E N E R A L ... The...

Documents

Transcript of G E N E R A L CATALOGUE - URMET · G E N E R A L CATALOGUE. FDI MATELEC 1 G E N E R A L ... The...