G-COM TECHNOLOGIES provides solutions for Cellular Monitoring, Communications Intelligence, and

Audio Surveillance.

Category Index Lithium Transmitter Series Digital Surveillance Transmitters Optical Audio Surveillance Concealable Transmitters Disguised Transmitters Cellular Interception Mains Powered Transmitters Phone Transmitters

Lithium Transmitter Series The Lithium Series Surveillance Transmitters operate on Narrow FM pathways. This allows the user to get good operating distances while drawing very low power output and power consumption during operation. The Lithium Series all employ Automatic Gain Control designs, providing optimum audio quality (comparable to that of Wide FM sound quality).

SLEEPER TRANSMITTER The Sleeper Transmitter model RLM-2 is a listening device. It operates as a Surveillance Transmitter used to gather conversations of a target and can be activated by Remote Control or Voice Activation. The RLM-2 is an advanced surveillance tool that can be operated without the user's physical interfacing with the unit. That means the user does not have to go into the room and turn on the transmitter manually. GCOM listening devices such as the Sleeper Transmitter surveillance tool can be activated by remote control using a wireless signal or by voice (VOX). Surveillance tools such as the Sleeper Transmitter are used for capturing conversations and transmitting them to a Radio Receiver. Features Include: - Embedded Remote Control (almost invisible considering the small size of the transmitter) - Extended Standby Time (up to 4 years) - RF Stealth Technology . . . the RLM-2 does not give off Radio Frequency emissions in its standby (sleep) mode In addition, the RLM-2 works in analog NFM-mode, offering good operating distance with relatively low power output and power consumption. The RLM-2 Surveillance Transmitter uses Automatic Gain Control, providing good audio quality despite its operation in the NFM mode.

Model # RLM-2 VOX SPECIFICATIONS Working frequency: 433,500 MHz. Modulation: NFM, deviation 5 kHz.

Operating voltage: 3V (one/two CR2450 or two AA batteries).

Minimum operating voltage: 2,6V.

Power output: not less than 5 mW (low) / 20 mW (high).

Processor-controlled Voice Activation System (VOX). Automatic Gain Control (AGC). Working temperature: 0С to +50С. Remote control embedded receiver sensitivity:

2 V.

Working time: up to 4 years in sleep mode, up to 20 days in active mode.

No RF emissions in sleep mode.

Dimensions: With two CR2450 batteries: 51x25x8 mm.

Without batteries: 51x25x3 mm.

VOICE ACTIVATED TRANSMITTER

Voice Activated Surveillance Transmitter model LM-1 is a covert room transmitter for audio surveillance used to collect conversations and transmit them to a Radio Receiver. It can be placed in a room or vehicle in order to capture and broadcast audio information or audio evidence for intelligence gathering purposes. This Voice Activated (VOX) Transmitter operates using Narrow FM (NFM). NFM gives off less 'noise' and causes less 'traffic' than other broadcast mediums. Using a Compander Circuit, the VOX Transmitter is able to transmit excellent sound quality comparable to WFM (Wide FM). GCOM VOX Transmitters use an effective micro-controller that starts the rf transmission once the voice activation circuit encounters speech or sounds. This is very powerful when every word that is spoken needs to be transmitted. In order to ensure the end of a conversation is transmitted, GCOM Voice Activated Transmitters are built with a long delay before shutting down into its standby mode. The lithium battery gives the VOX Transmitter a long operating time before replacement is necessary. The VOX Transmitter offers good operating distances with relatively low power output and power consumption. The VOX Transmitter uses Automatic Gain Control, providing good audio quality despite its operation in the NFM mode. The VOX Transmitter has built in microcontrollers which enable the Voice Activation feature. The Power (3V) is provided by lithium CR2450 batteries (alternatively by two AA batteries).

Model # LM-1 VOX SPECIFICATIONS Working frequency: 433,500 MHz. Modulation: NFM, deviation 5 kHz.

Operating voltage: 3V (CR2450), minimum operating voltage 2,6 V.

Power output: not less than 10 mW. Processor-controlled Voice Activation System (VOX).

Automatic Gain Control System (AGC).

Type of battery: DL2450 (Duracell). Estimating time of battery consumption at +20C.

a) Constant transmission: 30h.

b) Transmission /standby = 1/3 (8 hours per day): 120h – 150h (5 – 7 days).

c) Transmission /standby = 1/10 (~2,5 hours per day): 450h (> 18 days).

Working temperature: 0С +50С. Dimensions: 25x25x3 mm without battery; 25x25x8 mm with battery (CR2450).

VOICE ACTIVATED MICRO-TRANSMITTER THE LM-2 VOX ROOM TRANSMITTER IS A MINIATURIZED VERSION OF THE LM-1 VOICE

ACTIVATED ROOM TRANSMITTER. SMALLER IN SIZE, (ABOUT 4 MM THICK), THE VOICE

ACTIVATED MICRO TRANSMITTER HAS AN EMBEDDED ANTENNA, REDUCING ITS VISIBILITY

AND DETRACTING FROM UNNECESSARY ATTENTION. BECAUSE OF ITS SMALL SIZE, THE LM-2 VOICE ACTIVATED TRANSMITTER IS ABLE TO

ASSIST THE USER BY OBTAINING THE CONVERSATIONS OF A TARGET, AND TRANSMIT THEM

USING LOW POWER OVER A GOOD DISTANCE TO A RADIO RECEIVER. THE VOICE ACTIVATED

MICRO TRANSMITTER CAN BE PLACED IN A ROOM OR VEHICLE FOR VOICE MONITORING IN

ORDER TO CAPTURE AND BROADCAST AUDIO INFORMATION FOR INTELLIGENCE GATHERING

PURPOSES. THE LM-2 FUNCTIONS PRIMARILY AS A ROOM TRANSMITTER, USING NARROW FM (NFM). NFM GIVES OFF LESS 'NOISE' AND CAUSES LESS 'TRAFFIC' THAN OTHER VOICE MONITORING

BROADCAST MEDIUMS. USING A COMPANDER CIRCUIT, THE LM-2 IS ABLE TO TRANSMIT EXCELLENT QUALITY

SOUND COMPARABLE TO WFM (WIDE FM). THE LM-2 USES AN EFFECTIVE MICRO-CONTROLLER THAT STARTS THE RF TRANSMISSION

ONCE THE VOICE ACTIVATION CIRCUIT ENCOUNTERS SPEECH OR SOUNDS. FOR A ROOM

TRANSMITTER, THIS POWERFUL FEATURE IS VITAL WHEN EVERY WORD THAT IS SPOKEN

NEEDS TO BE TRANSMITTED. IN ORDER TO ENSURE THE END OF A VOICE MONITORING

CONVERSATION IS TRANSMITTED, THE LM-2 IS BUILT WITH A LONG DELAY BEFORE

WITHDRAWING INTO ITS STANDBY MODE. THE LITHIUM BATTERY GIVES THE LM-2 A LONG OPERATING TIME BEFORE REPLACEMENT IS

NECESSARY. THE LM-2 OFFERS GOOD OPERATING DISTANCE WITH RELATIVELY LOW POWER OUTPUT AND

POWER CONSUMPTION. THE LM-2 VOX TRANSMITTER USES AUTOMATIC GAIN CONTROL, PROVIDING GOOD AUDIO QUALITY DESPITE ITS OPERATION IN THE NFM MODE.

Model # LM-2 VOX SPECIFICATIONS Working frequency: 433,500 MHz. Modulation: 5 kHz.±NFM, deviation

Operating voltage: 3V (CR2450), minimum operating voltage 2,6 V.

Power output: not less than 10 mW. Processor-controlled Voice Activation System (VOX). Automatic Gain Control System (AGC). Type of battery: DL2450 (Duracell). Working temperature: 0С … +50С. a) Constant transmission: 30h. b) Transmission /standby = 1/3 (8 hours per day):

120h – 150h (5 – 7 days).

c) Transmission /standby = 1/10(~2,5 hours per day):

450h (> 18 days).

Dimension: 25x25x3 mm without battery;

25x25x8 mm with battery (CR2450

THE LM-2 VOX TRANSMITTER HAS BUILT IN MICROCONTROLLERS WHICH ENABLE THE

VOICE ACTIVATION FEATURE. THE POWER (3V) IS PROVIDED BY LITHIUM CR2450

BATTERIES (ALTERNATIVELY BY TWO AA BATTERIES).

LISTENING DEVICES LONG TERM TRANSMITTER Listening Devices used for extended room monitoring and audio surveillance, the ZA-1 for instance, are designed with operating times of up to 2.5 days. Listening devices deployed as investigative tools for monitoring conversations help law enforcement agencies collect evidence. Listening Devices such as the ZA-1 enable the user to be a part of the conversation under audio surveillance while the listening device sends the conversation to a team of officers nearby. The user can also be absent from the scene, allowing the listening device to capture audio surveillance and transmit the conversation to a surveillance receiver. With this extended operating time, surveillance monitoring of a target now permits round-the-clock conversation capture using the ZA-1 listening device.

Model # ZA-1 SPECIFICATIONS Working frequency: 417-433MHz Modulation: NFM, deviation 5 kHz. Stabilized by: SAW Modulation: NFM Power output: 5mW. Type of battery: A675 (PR675H) zinc-air battery Estimated Operating Distances: Open areas up to 400 meters City Environments 150 - 200 meters inside a building 50 - 100 meters Dimensions: 38x14x7 mm

LISTENING DEVICES SHORT TERM TRANSMITTER Listening Device model ZA-2 is a short term surveillance transmitter with an operating time of up to 18 hours. Surveillance monitoring using this listening device enables the user to monitor conversations of a target with a very small, discreet audio transmitter. This listening device is an investigative tool for monitoring conversations. The user may be present and take part in the conversation being captured by the listening device. The user may also be absent from audio surveillance operations. All that is required is to place the listening device in an area that no one would see it and the listening device would then transmit the conversations it hears to a surveillance receiver.

Model # ZA-2 SPECIFICATIONS Working frequency: 417-433MHz Modulation: NFM, deviation 5 kHz. Stabilized by: SAW Modulation: NFM Power output: 3mW. Type of battery: A312 zinc-air battery

Operating Time: 18 hours conditions permitting

Estimated Operating Distances: Open areas up to 400 meters City Environments 150 - 200 meters inside a building 50 - 100 meters Dimensions: 38x14x7 mm

Digital Surveillance Transmitters The Digital Surveillance Series are able to send wireless voice and data as a digital stream. Features such as remote control operation, encryption, and stealth sleep modes are typical of the Digital Surveillance Series.

GHOST VOICE INTERCEPT TRANSMITTER The Ghost Transmitter is a miniature surveillance tool used to capture audio surveillance conversations, store them in internal memory, and send them to the user for covert retrieval. The user places the Ghost Voice Intercept System at the location of the target. By remote control, the user activates the system. The system begins to record conversations within its proximity while the user can leave the area. When the user returns, the user sends a wireless signal to the system. The system then sends a burst of data to the user's Radio Receiver. This burst of data contains the target's audio conversations. The user now possesses the audio conversations, and can a) store them on a computer b) email them as .wav files to intelligence officers and law enforcement agencies. The Ghost Voice Intercept System provides audio surveillance recordings into an embedded flash memory and transfers recorded information to the computer upon command. It does this by remote control and transmits wirelessly. This Data transfer protocol provides a high level of data integrity. The received information can then be saved on a computer as a .wav file, which can be playback by any multimedia player. Special software is included for loading the voice data transmission bursts.

Model # FLASH-1 SPECIFICATIONS Embedded flash memory: 244, 488 or 976 MB.

Two record speeds: 32 kbit/s (LP) 64 kbit/s (HQ).

Voice activation (VOX).

Record time: up to 71h 04min (976 MB, VOX off, HQ).

Data transfer speed: 300 kbit/s. Time of 1h record transfer (VOX off):

HQ: 20min, LP: 10min.

Time of 1h record transfer (VOX 1:3):

HQ: 7min, LP: 3,5min.

DIGITALLY ENCRYPTED TRANSMITTER The Digitally Encrypted Transmitter model DS-2 is capable of broadcasting the conversation of a target to a matched Radio Receiver upon command by a wireless remote control. The Radio Receiver decodes the room transmitter or Digitally Encrypted Transmitter's radio transmissions so the user can privately monitor the conversation. Anyone that accidentally intercepts the transmission with a radio scanner or surveillance receiver would not be privy to the communication as the DS-2 was designed to transmit encrypted signals only to a Radio Receiver that is able to decrypt those signals. By remote control, the user activates the encrypted transmission. This encrypted transmission in the form of a digital audio signal is then sent as a data stream to a matched receiver. The the DS-2 has no RF emissions while it is in its 'sleep mode' and cannot be detected by most types of counter surveillance equipment. It uses 4xAA alkaline batteries (but can optionally operate on 2xAA lithium batteries as well).

Model # DS-2 SPECIFICATIONS Transmitter (with embedded remote control receiver):

Modulation: ASK-PWM, 64 kbit/sec, encryption.

Working frequency (average): 916,5 MHz (868,35 MHz).

7,2V (4 AA alkaline batteries or 2 lithium AA÷Operating voltage: 6 batteries).

Minimum operating voltage: 4V.

Power output: not less than 40 mW (low) / 400 mW (high).

С.°С … +50°Working temperature: 0

V.µRemote control embedded receiver sensitivity: 2

Working time: up to 4 years in sleep mode, up to 30 hours in active mode.

No RF emissions in sleep mode.

Dimensions (without batteries): 55x30x4 mm.

Receiver: Working frequency (average): 916,5 MHz (868,35 MHz).

Bandwidth: 2 MHz.

Sensitivity: -85 dBm. Operating voltage: 3V (2 AA alkaline batteries).

Minimum operating voltage: 2,5V.

Estimating working time with one battery set: 80 – 100 h.

С.°С … +50°Working temperature: 0

Dimensions: 113x75x27 mm.

Remote Control: Working frequency: 433,92 MHz.

Operating voltage: 9V (Duracell 9V).

Dimensions (without antenna): 110x70x28 mm.

KEYBOARD TRANSMITTER The Keyboard Transmitter is designed for remote PC keyboard interception (PS/2). Information is transmitted by radio frequency in the UHF band. This is a relatively simple but effective device for getting information of what somebody is typing on a pc keyboard. Because the Keyboard Transmitter is purely a hardware device, it can not be detected by software methods. The set consists of a transmitter and a receiver. The transmitter module is installed into the PC keyboard. The UHF-receiver receives the transmissions from the transmitter's dedicated modem module (the modem). A cable for connecting the modem to the UHF-receiver is supplied, as well as a cable for connecting the modem to a computer with software to load into the users computer.

Model # KS-1 SPECIFICATIONS Transmitter: Working frequency: 433,500 MHz.

Modulation: FFSK, 1200 bit/sec

Operating voltage: 5V (power derived from keyboard).

Type of keyboard: PS/2.

Power output: not less than 50 mW.

С .°С … +50°Working temperature: 0

Working time: unlimited. Dimensions: 35x13x4 mm. Modem: Operating voltage: internal 9V (Duracell 9V) or external 12V.

Operating current: 10mA.

С.°С … +50°Working temperature: 0

Internal battery working time: not less than 72h.

Dimensions: 113x75x27 mm.

Optical Audio Surveillance Access into target areas is not always possible. Secure and undetectable methods of monitoring are a necessity. The ability to covertly hear what is taking place is an invaluable asset, and because the use of transmitting voice is not limited to RF transmissions, Optical Audio Surveillance bridges the gap using infra red as well as laser light to transmit conversations.

LASER SURVEILLANCE SYSTEM The G-COM Laser Surveillance System enables the user to capture conversations inside of a room using infrared light transmissions, optical and electronic sound wave demodulation hardware, and a harmonic filtration system. Theory of Operation: The G-COM Laser Surveillance System consists of a highly focused light sent over a distance and beamed onto the surface of a window of a building such as an office room, hotel room, apartment room, house, etc. This highly focused light (or infrared light) encounters a series of micro-vibrations on the window's surface. These vibrations originate from speech conversations as well as other sounds inside the targeted room. The window vibrations are caused by oscillating frequencies from sound waves that emanate from speech and conversations of the people in the room. Just like a diaphragm of a microphone, the window also vibrates and it is this vibration that the Laser Surveillance System picks up on. The infrared light then reflects off of the surface of the window and back to an optical receiver. This optical receiver is connected to an electronic demodulation system that converts the optical signals produced from the infrared light into sound waves. These sound waves are then filtered and can be listened to in real time, or connected to an external recorder for future review.

SPECIFICATIONS:

Model # 4510-LASR

LASER TRANSMITTER: OPTICAL RECEIVER LASER TYPE: Semi-conductor PIN Diode

LASER WAVELENGTH: 820-840 nm (near infrared) Near Infrared

CURRENT CONSUMPTION:

Approx. 150 mA , 10 - 30 mA

DIMENSIONS: 25x25x3 mm without battery; 25x25x8 mm with battery (CR2450). POWER OUTPUT:

5 mW 5 mW

lENS TYPE: 135mm 500mm

POWER SUPPLY:

12 V, 8 x MN1500 "AA" Battery 9V, 1 x MN1604 Battery

Q: How is the sound quality of Laser Surveillance? A: Under ideal conditions, the quality is good. Q: Is the system easy to set up? A: Yes with practice. The first time always is difficult. That is why the user is advised to conduct a few practice tests in order to become familiar with mounting and aligning the G-COM Laser Surveillance System for optimum results.

INFRARED LONG RANGE TRANSMITTER SYSTEM Utilizing unique infrared technology that avoids detection and unauthorized radio interception, the Infrared Long Range Transmitter System monitors room conversations from distances of up to 500 meters away. A miniature Infrared Transmitter converts sound into non-coherent pulses of light. Designed for easy sight alignment, the optical receiver is housed in a single lens reflex camera mounted onto a tripod. Light pulses are converted back into audio signals with high-density electronic circuitry which filters stray light emission for interference-free listening. A discreet audio-amplifier control module clipped onto a tripod leg filters out noise and increases the signals sensitivity and gain while a LED bar graph indicates signal strength. A miniature credit-card sized recorder permits simultaneous recording of all intercepted conversations. The G-Com Infrared Long Range Transmitter System includes miniature infrared transmitter, infrared optical receiver, audio amplifier control module recorder, headphones, tripod and mounting accessories. Optional lenses are available to extend range.

SPECIFICATIONS:

Model # IRTX-4500

Infrared Microphone: 1000 mm 5/8.01 Infrared Receiver

WAVE LENGTH: 880 nm 880 nm

POWER SUPPLY: 2 x 1.5V MN9100 Battery 2 x 9V MN160 Battery

POWER CONSUMPTION:

30mA Battery Life up to 25 hours continuous 50mA (280mA with LED)

Dimension: 25x25x3 mm without battery; 25x25x8 mm with battery (CR2450). FREQUENCY RESPONSE:

200 Hz - 3000 Hz +/- 3dB 200 Hz - 3000 Hz +/- 3dB

AMPLIFIER GAIN Variable from 0 to 80dB Variable from 0 to 80dB

DIMENSIONS:

66 x 27 x 14cm 112 x 75 x 30mm

Concealable Transmitters Concealable Transmitters consist of room transmitter surveillance equipment, body wire packs, body wires, voice activated transmitters, man-down transmitters, wireless mics, tracking transmitters, and other self-contained audio surveillance devices that monitor conversations when access to a room is limited. These free-standing units are battery powered and can be installed quickly, or simply dropped anywhere that discovery is unlikely, such as under furniture, behind a book, etc. A Body Wire is generally placed in a pocket and can be carried from room to room. Body Wires can also be inserted into clothing or taped under clothing for concealed audio surveillance operations. A Room Transmitter can be left under a table or counter, on top of cabinets or shelving, behind wall mounted paintings or pictures, etc. Man-Down and Tracking Transmitters from GCOM are used to track an individual's location, broadcast distress calls, and transmit audio surveillance conversations.

LONG RANGE 5 WATT TRANSMITTER SERIES The 5 Watt Long Range Transmitter for surveillance operates on a high power output of 5 Watts in order to provide the operator with long distance transmissions of audio surveillance conversations. Surveillance that requires surveillance teams to be out of sight so as not to compromise the surveillance operation can rely on the Long Range Transmitter. The stable, crystal controlled frequency allows clear and intelligible transmission of surveillance conversations without loss of quality. The 5 Watt Long Range Transmitter boasts a 5 Watt power source to transmit audio surveillance over great distances to a Surveillance Receiver. The 5 Watt Long Range Transmitter employs a variable gain and high quality audio compressor stages for maximum versatility. Under ideal conditions

SPECIFICATIONS:

Model # 1420

FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 3 Watts ANTENNA TYPE: Rigid POWER SUPPLY: 1 X 9V Battery DIMENSIONS: 130 X 65 X 22mm WEIGHT: 170 gr. RECOMMENDED RECEIVERS:

RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

with no static interference, the 5 Watt Long Range Transmitter can send conversations over an extended distance for surveillance monitoring operations.

LONG RANGE 3 WATT TRANSMITTER SERIES Long Range Transmitter with a power of 3 Watts operates on a high power output in order to provide the operator with long distance transmission of audio surveillance conversations. Stable crystal controlled frequency allows clear and intelligible transmission without loss of quality. The 3 Watt Long Range Transmitter has a variable gain and high quality audio compressor stages for maximum versatility. Under ideal conditions with no static interference, the 3 Watt Long Range Transmitter can send conversations over great distances to a Radio Receiver. Uses include room monitoring, portable surveillance, audio surveillance sting operations, and outdoor conversation capture.

SPECIFICATIONS:

Model # 1419

FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 3 Watts ANTENNA TYPE: Rigid POWER SUPPLY: 1 X 9V Battery DIMENSIONS: 130 X 65 X 22mm WEIGHT: 170 gr. RECOMMENDED RECEIVERS:

RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

LONG RANGE 1 WATT TRANSMITTER SERIES Audio Transmitters transmit audio signals used by surveillance teams during an audio surveillance investigation. The 1 Watt Long Range Audio Transmitter operates on a high power output of 1 Watt in order to provide the operator with long distance transmission capability of audio surveillance conversations. Audio transmitters generally range in power output, and the 1 watt audio transmitter used for audio surveillance can transmit under ideal conditions up to a mile. The Audio transmitter transmits using a stable crystal controlled frequency to allow clear and intelligible transmission without loss of quality. The 1 Watt Long Range Audio Transmitter is an audio transmitter used for audio surveillance. The audio transmitter incorporates a variable gain as well as high quality audio compressor stages for maximum versatility in order to broadcast the surveillance conversations over a long range.

SPECIFICATIONS:

Model # 1418 FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 1 Watt ANTENNA TYPE: Flexible POWER SUPPLY: 1 X 9V Battery DIMENSIONS: 83 X 55 X 20mm WEIGHT: 95 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

LONG TERM TRANSMITTER The Long Term Transmitter is an audio surveillance transmitter capable of operating over a long duration for surveillance operations. The Long Term Transmitter can be placed in a target area hours before the conversation takes place. This is helpful when the target area is difficult to access. Because the Long Term Transmitter operates on a constant low power drain, the surveillance time is greatly extended without having to change batteries. Normal wireless audio transmitters require frequent battery replacement. Continuous active transmitting time ranges from 15 to 24 hours over a good distance, enabling the user to monitor the conversation from relatively far away.

SPECIFICATIONS:

Model # 1417

FREQUENCY: 115-150 MHz MODULATION: Crystal Controlled POWER OUTPUT: 15 mW ANTENNA TYPE: Flexible POWER SUPPLY: 1 X 3.4V, AA Lithium Battery DIMENSIONS: 83 X 16.5mm WEIGHT: 50 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401,RXU-14, RXP-100-4420

SUPER WIRELESS TRANSMITTER The Super Wireless Transmitter WMTX-4400-S is an enhanced audio transmitter that broadcasts powerful, clear sound far away thanks to its extended transmitting antenna. Its design is similar to the GCOM WMTX series, yet because of the antenna's size, it is able to send audio radio frequency signals much farther away. Used for conversation capture, the Super Wireless Transmitter WMTX-4400-S can be customized to operate on up to 7 communication channels. The Super WMTX-4400-S option employs an extra high sensitivity circuit which allows the user to pick up sound from up to 50 feet away. The transmitter employs state-of-the-art surface-mount technology, making it the most effective wireless audio transmitter of its kind.

Model # 1410 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 380-440MHz MODULATION: Narrowband FM POWER OUTPUT: 50mW ANTENNA TYPE: Flexible POWER SUPPLY: 3 X 1.5V, 357 Lithium Battery DIMENSIONS: 72 X 14mm WEIGHT: 25 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

BODY WIRE TRANSMITTER Body Wire audio surveillance Transmitter WMTX-4400-BW consists of a body wire that is body worn and functions as an audio transmitter used to monitor conversations. The Body Wire uses a surveillance microphone, monitors conversations, and sends them to an audio surveillance receiver near or far away. Body Wire packs can work with one or more audio receivers for multiple listening applications. The Body Wire is portable, lightweight, and functions as a law enforcement monitoring system. The Body Wire is compatible with a full range of GCOM Radio Receivers. An audio recording of the audio surveillance can be made using a GCOM surveillance receiver as well as other GCOM audio recording surveillance equipment. Body Wire Transmitter WMTX-4400-BW option employs an extra high sensitivity circuit, which allows the user to pick up sound from up to 50 feet away. It is now available with 7 frequencies.

Model # 1415 SPECIFICATIONS FREQUENCY: 400-420 MODULATION: Narrowband POWER OUTPUT: 50 mW ANTENNA TYPE: Wire POWER SUPPLY: 1 X 3V Battery DIMENSIONS: 66 x 2.9 x 1.5mm WEIGHT: 65.6 grams with battery RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXU-14, RXP-100-4420

HIGH POWERED TRANSMITTER The WMTX-4400 is a 300Mw audio surveillance transmitter, designed to monitor conversations with minimal interference over long distances. Unforeseen environmental problems such as weather disturbances, land obstacles, or distortion due to fast movements generally do not hinder the performance of the WMTX-4400 300Mw audio surveillance transmitter. The transmitter is built into a box for optimum durability and will withstand severe movements. The WMTX-4400 300Mw audio surveillance transmitter broadcasts a powerful, clear sound even to receivers located far away. Portable and lightweight, compatible with a full range of radio receivers, this audio surveillance transmitter is a sound choice for high powered transmission. The WMTX-4400 option employs an extra high sensitivity circuit which allows the user to pick up sound from up to 50 feet away. It is now available with 7 frequencies.

Model # 1416 SPECIFICATIONS MODULATION: Narrowband ANTENNA TYPE: Wire POWER SUPPLY: 1 X 9V Battery DIMENSIONS: 67.06 x 59.19 x 29mm WEIGHT: 115 gr. with Battery RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

AUDIO / TRACKING / MAN DOWN TRANSMITTER Audio surveillance transmitter model WMTX-4400-MD is a man down transmitter or man down alert transmitter, tracking transmitter, as well as a conversation monitoring transmitter. It was designed to alert body guards and protective forces that the user may be in trouble and require assistance. Used in and by: Law Enforcement Agencies, undercover operations, prison control officers, undercover agents, and anyone working under life-threatening conditions. The Man Down feature coupled with the dual-mode audio tracking function makes the GCOM 1400 MD a guardian angel. By activating this feature discreetly, a silent alarm is generated to alert a commanding officer, security team, rescue squad, or medical team that the user has encountered a problem and needs assistance. By listening to the audio signal, the team can plan a safe rescue as well as pinpoint the tracking signal to locate the user.

Model # 1400 MD SPECIFICATIONS FREQUENCY: 400-420 MODULATION: Narrowband POWER OUTPUT: 20 mW ANTENNA TYPE: Internal POWER SUPPLY: 1 X 3V Battery DIMENSIONS: 69.5 x 7.5 x 4.5mm WEIGHT: 12 grams with battery RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

TRACKING / SURVEILLANCE TRANSMITTER Surveillance Transmitter with Tracking System model WMTTX-4500-T is both an audio surveillance transmitter and a powerful tracking transmitter. It can transmit a clear audio signal consisting of a person's conversation, and as a tracking system it can also send a tracking pulse which can be followed using a field intensity directive receiver. This tracking pulse can be used to monitor and locate stolen property, shipments, people, or any moving object. It can also be tracked by helicopter for up to 1 mile. The WMTTX-4500-T utilizes a high sensitivity circuit which allows the user to listen to sound pick up from up to 50 feet away. For communicating and locating people and objects, the WMTTX-4500/T employs state-of-the-art surface-mount technology, making it the smallest and most powerful transmitter (and tracking transmitter) available anywhere in the world.

Model # 4500T SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 20mW ANTENNA TYPE: Internal POWER SUPPLY: 3 X 1.5V DIMENSIONS: 69.5 X 7.5 X 4.5mm WEIGHT: 12 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

VOICE ACTIVATED TRANSMITTER The voice activated Wireless Microphone model GCOM 1400 Vox broadcasts surveillance only when people speak. When in use, the Voice Activated Transmitter will activate and deactivate its power consumption based on the presence of sound. Because of the Voice Activation feature, the GCOM 1400 Vox battery life can be increased up to 100 times compared to a transmitter that is constantly in operation. Features: - Increased operating time - When used with a voice activated recorder, only speech or other sounds will transmit and be recorded. - Increased battery life - Small and discrete design - It can be custom mounted into almost any comparably sized object - Easy to operate

Model # 1400 VOX SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 20mW ANTENNA TYPE: Internal POWER SUPPLY: 3 X 1.5V DIMENSIONS: 69.5 X 7.5 X 4.5mm WEIGHT: 12 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

QUARTZ TRANSMITTER SERIES The Wireless Microphone model GCOM 1400 is an Audio Transmitter that broadcasts powerful, clear sound. It is very small and can be placed discretely for covert monitoring operations in order to gather conversations of a target. Features: - Small and discrete design - High-tech laminate makes it weather resistant - It can be custom mounted into almost any comparably sized object - Easy to operate The GCOM 1400 is a transmitter that can also be utilized as a hands free communications tool with unlimited field applications. It employs state-of-the-art surface-mount technology, making it the smallest transmitter of its kind available anywhere in the world.

Model # 1400 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 20mW ANTENNA TYPE: Internal POWER SUPPLY: 3 X 1.5V DIMENSIONS: 69.5 X 7.5 X 4.5mm WEIGHT: 12 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Disguised Transmitters Disguised Transmitters are surveillance transmitters packaged and hidden into everyday common objects in order to capture conversations. Ideal for surveillance of areas that the user has little control over, the Disguised Transmitter line can easily assist the user into a target area and be operated with discretion. Miniature transmitters can be incorporated into almost any object the user requires for undercover operations. Customized housings may be requested.

DESKTOP LIGHTER TRANSMITTER Desktop Lighter Transmitter is a stationary, wireless, audio monitoring transmitter designed to capture conversations in an office, hotel, or residential room and transmit to a Radio Receiver. It falls under the classification as a stationary Surveillance Transmitter because it was designed as a desktop monitoring device as opposed to a body back transmitter or hand carried monitoring tool. The user may simply activate the Desktop Lighter Transmitter by the turn of a switch. Conversations can then transmit to a local area for live monitoring. Most GCOM radio receivers may connect to an external recording device for evidence collection.

MODEL # 1427 SPECIFICATIONS FREQUENCY Crystal Controlled UHF 380-440 MHz MODULATION Narrowband FM POWER OUTPUT 50 mW ANTENNA TYPE Concealed POWER SUPPLY 1 X 1.5V MN9100 Battery DIMENSIONS 70 x 45 x 15mm WEIGHT 70 gr. RECOMMENDED RECEIVERS

RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

LIGHTER TRANSMITTER

Lighter Transmitter is a surveillance transmitter that is body worn or placed on a table or desk to capture conversations and transmit them to a radio receiver. The RF surveillance microphone and transmitter are covertly built into a butane lighter. The user may carry and operate the Lighter Transmitter, or subtlety place the unit on a desk or table top to monitor voice conversations of a suspected criminal target. The conversation will then be directed to a Radio Receiver that can either be monitored by a Surveillance Team or connected to Surveillance Recorders for audio Surveillance Recordings of the conversations that take place for storage and future review.

CLOCK TRANSMITTER Clock Transmitter is a disguised transmitter placed in a functioning Wall Clock, Mantle Clock, or Desk Clock that can be placed on a desk, mantle, or mounted on a wall to capture voice conversations in a room. The Clock Transmitter is generally used to monitor conversations in an office or residential environment. Surveillance operations employ the clock transmitter because the built-in surveillance microphone picks up the conversation and then broadcasts it to the surveillance receiver for live audio feed. Locations for installation include board rooms, office rooms, reception / front lobby entrance points, shipping areas, as well as the living room and dining room of a home.

SPECIFICATIONS:

MODEL # 1426

FREQUENCY Crystal Controlled UHF 395-415MHz MODULATION Narrowband FM POWER OUTPUT 15 mW ANTENNA TYPE Mains Wiring POWER SUPPLY 110 or 240 VAC DIMENSIONS Based on mains plug adaptor type. WEIGHT Based on Mains Plug Adapter Type RECOMMENDED RECEIVERS

RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Model # 1425 SPECIFICATIONS FREQUENCY: Crystal Controlled, UHF 380-440 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Concealed POWER SUPPLY: 2 X 1.5V, MN9100 Battery DIMENSIONS: Based on size of clock WEIGHT: Based on size of clock RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401,RXU-14,RXP-100-4420

ASHTRAY TRANSMITTER

ASHTRAY TRANSMITTER Ashtray Transmitter is a hidden transmitter consisting of a surveillance microphone built into a ceramic or composite ashtray that picks up conversations and then transmits them to a radio surveillance receiver. This disguised transmitter, one of many hidden transmitters, provides a highly secure method of monitoring conversations and discussions. Designed for intelligence gathering, the Ashtray Transmitter is an audio monitoring device designed to be used in investigations. Favored by law enforcement agencies, the Ashtray Transmitter is covert and can help capture conversations of suspected criminals. Mercury Option: To conserve battery life, an optional built-in mercury switch can turn the power off when the ashtray is turned upside down. A removable base isolates the microphone from table-top noise and distortion and allows easy access for battery replacement.

BRIEFCASE TRANSMITTER Briefcase Transmitter is designed to transmit covert audio conversations from an office, conference, or meeting without drawing attention. Built into an attaché case, the Briefcase Transmitter is able to broadcast over an extended distance, thanks to its surveillance microphone and its lengthy antenna that is crafted inside the lining of the briefcase. The covert transmitter is concealed within the skeletal frame of a high quality briefcase. The surveillance microphone is hidden behind the combination lock. The handle of the briefcase contains the activation and deactivation switch. An inconspicuous position of the handle controls the transmission activation.

SPECIFICATIONS:

Model # 1423 SPECIFICATIONS

FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Concealed POWER SUPPLY: 2 x 1.5V, MN9100 Battery DIMENSIONS: Based on size of ashtray. WEIGHT: Based on size of ashtray. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Model # 1423 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 380-440 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Concealed POWER SUPPLY: 2 x 1.5V, MN9100 Battery DIMENSIONS: Based on size of briefcase WEIGHT: Based on size of briefcase RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

BELT TRANSMITTER Audio Surveillance using a Belt Transmitter enables the user to transmit all conversations using a high grade leather or nylon belt with a surveillance transmitter that sends the users audio conversations to a radio receiver operated by a surveillance team. The transmitter is concealed behind the buckle. The transmitter is activated by an unobtrusive micro switch concealed within the buckle. In order to increase the distance of transmission, the antenna is embedded into the length of the belt. This enables an extended antenna length during installation and creates an extended transmission radius. The Belt Transmitter is available in either black or brown (please specify size required).

PAGER TRANSMITTER Pager Transmitter is comprised of a live Audio Surveillance Transmitter housed into a covert, body worn pager housing that can be either carried on the body, or left in a room to broadcast audio conversations. As a mobile transmitter, the Pager Transmitter is portable and can be taken on multi-surveillance operations without raising attention to targets that their conversations are subject to audio monitoring. The Pager Transmitter can be clipped onto a belt, pants, jacket, as well as a backpack or shoulder bag for maximum portability. In addition, the user can remove the body worn Pager Transmitter and place it down on a surface such as a table, desk-top, countertop, couch, bed, in a room for operation. As a mobile transmitter, the user is free to move around from room to room and transmit conversations to a radio receiver for wireless monitoring.

SPECIFICATIONS:

Model # 1422 SPECIFICATIONS

FREQUENCY: Crystal Controlled UHF 395 - 415 MHz MODULATION: Narrowband FM ANTENNA TYPE: Concealed POWER OUTPUT: 15 mW POWER SUPPLY: 2 x 1.4V, RE212 Battery DIMENSIONS: Based on size of belt WEIGHT: Based on size of belt

RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Model # 1412 FREQUENCY: Crystal Controlled UHF 380-440 MHz MODULATION: Narrowband FM POWER OUTPUT: 50mW ANTENNA TYPE: Concealed POWER SUPPLY: 1 X 1.5V, MN9100 Battery DIMENSIONS: 70 x 45 x 15mm WEIGHT: 70 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

CALCULATOR TRANSMITTER Calculator Transmitter consists of a working Audio Surveillance Transmitter built into a functioning desktop calculator. The transmitter can monitor conversations and send them to a receiver for a control officer to either listen to or connect to a voice logger for evidence gathering. This surveillance device can be left on a table or counter, and moved from room to room, operating freely in an office environment where no one would suspect a calculator is housing a transmitter. The transmitter functions even when the calculator is in use, running off its battery to provide super long life.

SPECIFICATIONS:

Model # 1421

FREQUENCY: Crystal Controlled UHF 395-415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15mW ANTENNA TYPE: Concealed POWER SUPPLY: 1 x 1.5V, MN1500 "AA" Battery DIMENSIONS: 128 x 70 x 18mm WEIGHT: 100 gr. RECOMMENDED RECEIVERS:

Cr-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Cellular Interception G-COM Cellular Interception helps satisfy the growing need for methods and tools sophisticated enough to intercept new state-of-the-art voice and data communications. Flexible design and engineering allows for customizing and upgrading of the G-COM Intercept Systems to meet the requirements of all users. G-COM Intercept Systems provide clear and accurate monitoring of information needed for ongoing investigations and are reliable enough to be used as evidence in court. G-COM engineers and technical consultants provide leading edge technology, full training on all equipment, seminars on advanced data and communication systems, and in-country site surveys for custom engineering projects. CDMA MONITORING SYSTEM

Cellular Monitoring CDMA Intercept model G-Com 2066 will intercept, record, and play back CDMA cell phone conversations from a CDMA mobile phone network. The CDMA Cellular Monitor is used by law enforcement and government agencies to monitor and store CDMA cellular phone conversations of suspected criminals, militants, terrorists, and those committing espionage. The G-Com 2066 CDMA Intercept also functions as an SMS Intercept, able to capture SMS (short message service) data. The CDMA Intercept is a passive system, in which no signal is transmitted from the cellular monitoring system. In addition, the CDMA Intercept does not effect the cellular communication between the cellular phone handset and the cellular service provider. Therefore, the cell phone network receives no electromagnetic interference. This cellular intercept system operates by automatically detecting the strongest signal in a CDMA service area. Working as a mobile phone intercept on global CDMA networks, the CDMA Cellular Monitor also intercepts control channels and both sides of a conversation through traffic channels.

GSM MONITORING SYSTEM

Cellular Monitoring GSM Intercept model GSM 2060TP is a tactical off the air GSM Mobile Phone Intercept System, designed as a GSM Intercept and tracks GSM cellular telephone traffic in a local area. GSM Interception for cellular monitoring of cell phone conversations are lawful intercept tools for law enforcement and government agencies. GSM Interceptor equipment used for GSM monitoring permit law enforcement agents to gather intelligence on suspected criminals and terrorists. No hard wired connection to the cellular provider is necessary, as the GSM Interceptor can intercept gsm signals off the air. Optionally, the GSM Mobile Phone Intercept System can be custom built to fit inside of a surveillance van in order to monitor & track multiple conversations. The GSM Interceptor can also record real time off air intercept of GSM phone calls for future review. The GSM Intercept is a tactical intercept, enabling the user to pursue suspects in cities, country sides, and while traveling.

GSM INTERCEPT A5.1 CHATTER GUARD

The GSM Intercept model GSM 3060 is a GSM Interception system that can break the GSM A5.1 encryption algorithm used in GSM communications during real time operation and simultaneously diagnose threat marked key words. GSM Interception for the A5.1 protocol deciphers the encryption format used to secure GSM A5.1 communications. The GSM 3060 GSM Intercept can also operate with the HSS Chatter Guard Word Identifier used to capture words or phrases from a pre-determined threat database. This enables Law Enforcement to conduct GSM Cellular Interception of A5.1 and review communications for trigger words, names, and other audio voice codes used by suspected terrorists or criminals. The HSS Chatterguard Word Identifier is an integrated feature that can enhance GSM Interception COMINT. It utilizes Key Word spotting technology during the automatic call monitoring process. It enables the monitoring and tracking of user defined keywords over hundreds of concurrent calls in real-time as well as off-line modes. Unlike speech recognition for telephony speech-driven services, the “Chatter Guard” engine is active for the whole call duration, looking for specific words within a long spontaneous and natural conversation between two or more speakers.

Mains Powered Transmitters Mains powered transmitters are ideal for extended use where continuous access is not possible. Easily installed, they will continue to operate maintenance free when connected directly to an electrical power source. Utilizing AC power line as both antenna and power source, mains transmitters are ideal for long term surveillance operations. Automatically adapting to all voltages between 110 to 240 VAC, they will not interfere with other electrical equipment.

MAINS MODULE TRANSMITTER Mains Transmitter or Mains Module Transmitter is a surveillance transmitter built into a mains powered surveillance device for conversation capture. The Mains Module Transmitter is powered by attaching it to an electrical wire. That means that if there is a lamp or tv or radio that works by plugging into an electrical outlet socket, the user can connect the transmitter anywhere on the wire and power the surveillance transmitter. Conversations can be captured and sent to a radio receiver. Also known as a Line Powered Transmitter, the Mains Module Transmitter is easily concealed. It is designed to monitor conversations of target areas with direct access to a mains power supply so that it can transmit indefinitely. The installation possibilities are unlimited using existing electrical fittings or appliances, where the user simply connects the alligator clips to a power wire.

Model # 1430 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395 - 415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Mains Wiring POWER SUPPLY: 110 or 240 VAC DIMENSIONS: 69.5 X 7.5 X 4.5mm WEIGHT: 13 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

MAINS POWER STRIP TRANSMITTER The Power Strip Transmitter is an electrical mains power transmitter that operates when connected to an electrical outlet, and will transmit indefinitely until it is unplugged from the mains power source. The power line acts as the antenna and helps the Power Strip Transmitter broadcast its signal. The Power Strip Transmitter is a non-permanent mains powered transmitter. It can be plugged into a wall outlet to commence transmitting, and then moved to alternate locations as the condition arises.

MAINS OUTLET TRANSMITTER The Outlet Transmitter is a monitoring device disguised as an electrical wall outlet used to transmit wireless surveillance such as a private conversation, speech, discussion, or lecture. The Outlet Transmitter installs the same ways as an electrical outlet installs. Once the user connects the electrical connections, the Outlet Transmitter begins to transmit. In addition, the Outlet Transmitter also functions as a normal outlet. If the target connects a lamp, clock, or other appliance, the power will flow to those appliances and not hinder the powering of the Audio Transmitter. The Outlet Transmitter is available in many configurations to meet most international environments.

SPECIFICATIONS:

MODEL # 1429 SPECIFICATIONS

FREQUENCY Crystal Controlled UHF 395-415 MHz MODULATION Narrowband FM POWER OUTPUT 15 mW ANTENNA TYPE Mains Wiring POWER SUPPLY 110 or 240 VAC DIMENSIONS Based on mains plug adaptor type WEIGHT Based on Mains Plug Adapter Type RECOMMENDED RECEIVERS

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Model # 1428 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395 - 415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Mains Wiring POWER SUPPLY: 120 - 240 VAC DIMENSIONS: Based on mains outlet type. WEIGHT: Based on mains outlet type. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

Phone Transmitters Clearly monitoring both sides of a telephone conversation, the discreet range of Phone Transmitters are easily installed on the telephone line, in the socket, or in the instrument itself. These transmitters become operational when the telephone is in use and give no indication of their presence to the telephone user. Phone Transmitters that obtain their power from the telephone lines provide maintenance-free and unlimited transmission.

ROOM AND TELEPHONE TRANSMITTER SERIES The Room and Telephone Transmitter is a covert communication surveillance device that transmits both room and phone conversations to a Radio Receiver. During telephone conversations, the Room and Telephone Transmitter acts as a phone wire tap to capture all phone call activity. When the telephone is inactive, the communication surveillance trigger detects the change in voltage, and activates the room monitoring function. Voices and conversations in the room are then able to be converted into a covert broadcast of audio surveillance information. Because the Room and Telephone Transmitter is connected to a phone line, it does not require a battery to power the transmission function. The phone line provides the power required for unlimited communication surveillance.

Model # 1435 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395 - 415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Telephone Wiring POWER SUPPLY: Telephone Current DIMENSIONS: 66 x 27 x 14mm WEIGHT: 70 gr. RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

TELEPHONE RECEPTACLE TRANSMITTER SERIES

The Telephone Receptacle Transmitter is an in-wall communications surveillance telephone wiretap device that transmits both sides of a phone conversation to a Radio Receiver. The Receptacle Transmitter is concealed in a standard telephone wall receptacle and can be installed by the user simply by replacing the original fitted unit. This telephone transmitter is a communication monitoring device and does not require batteries to operate. The Receptacle Transmitter's optional design allows the communications surveillance of either a dedicated instrument or any extension on the telephone line. Because the communications surveillance of a phone receptacle may vary by country, please specify which type of telephone receptacle is required. The Receptacle Transmitter is powered by the energy of the phone line, therefore, it can transmit its communications surveillance indefinitely.

MODEL # 1434 SPECIFICATIONS FREQUENCY Crystal Controlled UHF 395 - 415 MHz MODULATION Narrowband FM POWER OUTPUT 15 mW ANTENNA TYPE Telephone Wiring POWER SUPPLY Telephone Current DIMENSIONS Based on Receptacle Used WEIGHT Based on Receptacle Used RECOMMENDED RECEIVERS

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

TELEPHONE TRANSMITTER PARALLEL The Parallel Telephone Transmitter is a telephone tap used to transmit both sides of a conversation when the phone is in use. The user can install the Parallel Transmitter inside the telephone or anywhere along the line as a Parallel Connection. Acting as a Parallel Telephone Tap, the Parallel Telephone Transmitter will monitor the phone conversation and broadcast it to a Radio Receiver. Also known as a Parallel Tap, the Parallel Telephone Transmitter works a wire tap or wiretap in order to capture both sides of a phone call through the use of crystal controlled frequencies that ensure exceptional transmission stability. Like most G-Com wire tap devices, the Parallel Telephone Transmitter or Parallel Tap does not require batteries. The Parallel Transmitter derives its operating power from the telephone line power, and can function indefinitely.

TELEPHONE TRANSMITTER SERIES The Series Telephone Transmitter is a telephone tap used to transmit both sides of a conversation when the phone is in use. The user can install the Series Transmitter inside the telephone or anywhere along the line as a Series Connection. Acting as a Series Telephone Tap, the Series Telephone Transmitter will monitor the phone conversation and broadcast it to a Radio Receiver. Also known as a Series Tap, the Series Telephone Transmitter employs crystal controlled frequencies to ensure exceptional transmission stability. The Series Telephone Transmitter or Series Tap does not require batteries. The Series Transmitter derives its operating power from the telephone line power, and can function indefinitely.

Model # 1432 SPECIFICATIONS FREQUENCY: Crystal Controlled UHF 395 - 415 MHz MODULATION: Narrowband FM POWER OUTPUT: 15 mW ANTENNA TYPE: Telephone Wiring POWER SUPPLY: Telephone Current DIMENSIONS: 49 x 13 x 17mm WEIGHT: 10 g RECOMMENDED RECEIVERS:

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

MODEL # 1431 SPECIFICATIONS FREQUENCY Crystal Controlled UHF 395 - 415 MHz MODULATION Narrowband FM POWER OUTPUT 15 mW ANTENNA TYPE Telephone Wiring POWER SUPPLY Telephone Current DIMENSIONS 49 x 13 x 17mm WEIGHT 10 g RECOMMENDED RECEIVERS

CR-650, RX-U500, RX-16, RXP2-U 4401, RXU-14, RXP-100-4420

G-COM Technologies provides a wide spectrum of specialized digital monitoring, logging equipment, and police surveillance equipment for governments, law enforcement agencies, military users, etc. G-Com's Research and Design Laboratories have pioneered multiple areas of audio surveillance, cellular monitoring, phone surveillance, and communication intelligence. Clients include: US Security Agencies (federal & state) US Police Detective Operatives International Police Detectives Society for Forensic Sciences Association for the Advancement of Science NASA The Scientific Community In addition, there are hundreds of regional, local law enforcement agencies as well as all branches of the Armed Forces in the U.S. Government agencies come to G-COM to solve difficult problems such as overcoming the barriers of monitoring and logging sophisticated GSM digital transmissions. Specialties include integration, custom engineering, reverse engineering, site surveys and training. Should you have any questions or comments, you may email us at info@gcomtech.com