Title

IntroductionSystem that will manage the incoming information from the Modem and send back the information to LCD Display.

MENUProblem Statement1. The need of fast information transferring2. The need of notice board in educational sector3. Make a system which can be access remotely

.MENUObjectives1.To develop electronic door message system using a graphical user interface development software Microsoft Visual Studio.2.To interface and test MyEdoor functioning system.3.To Apply MyEdoor system in real environment for further improvement.

MENUProject FlowChart

Literature Review SummarySYSTEMADVANTAGEDISADVANTAGEMATLAB SMS Sender (Feng, 2007)Can send sms from email, required no hardware only an internet connectionCannot receive sms have have a limited phone carrier list.Microsoft Visual Basic 6 SMS application (Prashanth, 2004)Telephone number database, can store contact name. Message counter for text message sendingLimited only for India carrierSending message onlyMicrosoft Visual Studio GSM Application(http://en.pudn.com/)Communication port selection for the modem to connect.Only send SMSDo not have receive SMS functionStudent and Teacher Information Microsoft Visual Studio 2008(Kumar et.al, 2002)Menu selection can be doneCan add database to register student and teacherDo not have a hardware connected with this systemGSM Based Voting System in Microsoft Visual Basic 6(Dept. of E&C, PCE,2013)Two way connection, receive input from GSM and display it to LCDReceive and display SMS onlyGIGA Soft SMS Manager Version 3.0(http://www.gigasoft.in)Receive and send SMSUsing A modem or an internet connectionThe software development software cannot be foundDemo user onlyMENUPleminary Work

Admin Login Page

Menu Strip

ConclusionMicrosoft Visual Studio is the platform in developing MyEdoor System.A friendly Graphical User Interface is developed using a Microsoft Visual Studio. This will make the easy user to control the system. TC35 modem are able to receive and send a text message.The interfacing with the hardware will be done at the FYP 2 and applying it to the real enviroment.

MENUMethodologyPrototype ModelPlanning PhaseIdentify the problem backgroundDefine the project scope and objectivesPerform a research on exiting systemDetermine the development resource requirementMilestone2. Analysis PhaseResearch through various type of system

Methodology 3. Design PhaseUser interface designProgram designDatabase design4. Implementation PhaseBuilding, testing and debugging systemMENUPleminary Work

Send SMS to User

Receive SMS fromMENU

Gantt Chart for FYP2THANK YOUMENU