specification sheet

fP54sgr

400hp •16000kg gVm •40000 GCM •3.8m wb •air suspension

prime mover

4x2 Fp54

engine brake

b double rated

driver’s air baghill start system

automated transmission

adr approved sleeper cab

MODEL: FP54SGR3VFAA 4x2 prime mover

WHEEL BASE3800mm SPECIFICATIONS

ENGINEMitsubishi FUSO OM457-T3 Diesel (ADR 80/03)Configuration: 6 Cyl. In-line OHVType: Waste-gate Turbocharged with

Air to Air IntercooledDisplacement: 12 litre (11967cc)Bore: 128mmStroke: 155mmPower (DIN): 295kW @ 1900 rpmTorque (DIN): 2000Nm @ 1100 rpmMaximum Engine Speed: 2100 rpmCooling System: Water Cooled with Viscous Coupling FanAir Cleaner: Paper Element Type with Restrictor Indicator

Vertical Intake Mounted on Clean Air Side (RH)Emission Control: Selective Catalytic Reduction (SCR)

FuelInjection System: Unit Pump InjectionFuel Capacity: 400 Litres Rectangular Alloy Tank

with Locking CapMax Fill to approx 96% of Air Capacity

Filtration: Filter with Water Separator and Dash IndicatorAdBlue Exhaust Fluid Tank: Locking Cap TypeCapacity: 40Litres

ElectricalVoltage: 24V Negative GroundAlternator Capacity: 80 ampStarter Capacity: 24V-7.0kWBattery Capacity: 2x12V, 150Ah/20hrBattery Specification: 2x145G51 (N150)Headlamp - Type: HalogenFog Light: Halogen

CLUTCHControl: Automated Manual (no clutch pedal)Specification: C12W43P Single Plate 430mm diameter

TransmissionFuso G230-12 (INOMAT-I I)Type: 12 Speed Automated ManualFeatures: Crawler Mode Skip Shift Function for Light Loads ECO Mode to Minimise Fuel UsageRatios: 1st 2nd 3rd 4th 5th 6th 7th 11.672 9.101 7.055 5.501 4.400 3.430 2.652 8th 9th 10th 11th 12th RHigh RLow 2.068 1.603 1.250 1.000 0.779 9.101 11.673 Torque limited to 1775Nm from 1st to 3rd and ReversePTO Openings: LH Side & Rear XMSN

Propeller shaftType: Single Main Shaft GW5E2200

Front AxleFUSO F090TType: Reverse Elliot ‘I’ BeamCapacity: 7500kg

REAR AXLE FUSO R14T/D14Type: Full Floating Hypoid TypeCapacity: 10800kg*Ratio: 4.222:1*See MAX LOADING for vehicle capacities

The new generation intercooled, turbocharged powerplant provides 24% more torgue and protects theenviroment with its SCR Emmision Control

Suspended driver’s seat withmultiple adjustments & lumbarsupport for driver comfort

Spacious, climate controlled cabin with central locking, electric windows, radio / CDplayer, and automated transmission, makes the Fuso Heavy Truck range a winner indriving and operational comfort and ease

and other specifications of Fuso trucks Australia

GVM:16000kg

GCM:40000kg Air Rear Suspension

SteeringType: Integral Ball and NutSteering Column: Tilt/Telescopic Adjustable

BrakesType: Full Air, Dual Circuit with FUSO Taper Rollers, ABS plus ASR (Anti Slip Regulator) Size - Front: 410x150mm

- Rear: 410x200mmPark Brake: Rear Wheel Spring ActuatedAuxiliary: Powertard Exhaust Brake with 4 Levels of RetardationTailer: Hand Control Valve, Air Lines Coupling and Electrical Cable

FRONT SUSPENSIONType: Long Taper LeafSize: 1650x90mm LeavesShock Absorbers: Double Acting

REAR SUSPENSION ( air)Type: Trailing Arm Air Suspension with Dump ControlRoad Friendly Rated : Approval Number RF2038Air Bags: 2x300mm dia.Capacity at Ground: 11000kg total*Shock Absorbers: Double Acting*See MAX LOADING for vehicle capacities

CHASSISType: Reinforced Parallel Channel

Rear of Chassis Tapered to Suit TractorSize: 276x90x6.0mmWidth: 840mmTensile Strength: 540Mpa

WHEELS & TYRESWheel - Type: 7, Single Piece Steel Disc (Including Spare) - Size: 22.5x8.25DC - Stud Pattern: 10x335mm PCDTyre - Size Front: 295/80R22.5 152/148 - Size Rear: 11R22.5 148/145 - Size Spare: 295/80R22.5 152/148

MASS (kg - estimated)*Model Front Rear TotalFP54SGR3VFAA 4395 1810 6205Note: Mass (est.) includes oil and water but excludes spare wheel, tools & fuel* Weights provided are subject to 3.5% variation (+/-)

instrumentsGauges: Speedometer with Odometer

TachometerAir Pressure (2)Fuel LevelWater TemperatureAdBlue Level

Colour Information Display Fuel ConsumptionService IndicatorsHour Meter and TripmeterOil Level Check

Warning Lamps: ABSASRTurn SignalHigh BeamEngine Brake & Shift Down BrakeDriver’s Seat BeltFog LampAll Major System FaultsOil LevelAd Blue LowAir Suspension LowAlternatorCruise ControlCab Tilt Lock

Warning Lamp/Buzzer: Air PressureOil PressureHill StartPark BrakeEngine OverrunEngine Overheat / Low Coolant Level

Cab featuresType: All Steel Forward Control Elec / Hyd Tilt Cab:Mounting: Air Suspended Front and RearColour: Natural WhiteWindscreen Wipers: 2 Speed + Intermittent Cycle

with Integrated Washer NozzlesRear Vision Mirrors: 2 x External

Flat Main Mirrors Plus Convex SpottersMotorised Main Mirrors, All Mirrors Heated

Seating Capacity: 2Seat Belts: 2 Lap SashSeats - Driver: Suspended with Lumbar Support

- Passenger: High Back Fixed BaseSleeping: ADR42/04 Approved Sleeping Berth

MAX. LOADING Model Front Rear Total FP54 6500kg 10000kg 16000kg

Safety is paramount with driver’s air bag, seat belt pre-tensioners, cruise control, hill start system ,motorised mirrors, easy to read comprehensive instruments and left hand transon window combineto provide uncompromised driver safety

SCR is a simple system that allows the engine to be tuned for optimalcombustion and injects AdBlue into the exhaust to reduce emissions.

Unless specified in writing herein the accessories, applications, bodies or equipment depicted in this document are for illustration purposes only and may not be available from Mercedes-Benz Australia/Pacific Pty Ltd (ABN 23 004 411 410) (“MBAuP”).No representation or warranty whatsoever is given in relation to any accessories, applications, bodies or equipment or suitability of same that are shown herein that may be manufactured, supplied or fitted by a party other than MBAuP. MBAuP reserves the right without notice or obligation to discontinue or make changes to the colour, designs, materials and specifications of the products and options referred to herein at any time. For the most current information and in order to ascertainwhich accessories, applications, bodies and equipment are available from MBAuP please contact your authorised Mitsubishi FUSO truck and bus dealer. Fuso is a registered trademark of Mitsubishi Fuso Truck & Bus Corporation.Copyright © MBAuP. Reproduction in whole or part prohibited without written approval. Date: Nov. ’11 Part No. TSH50C

Call 1300 426 812 or visit fuso.com.au

SPECIFICATIONS

warranty

3 YEAR & 3 YEARBasic/Powertrain3 Years, 200,000kms or 4,000 operating hours(whichever comes first) 3 Years Cab Perforation/Anti Corrosion

STANDARD FEATURESDrivingDriver’s Air Bag and Seat Belt Pre-tensionersSuspended Driver’s SeatHill Start SystemCentral LockingElectric Windows Cruise Control (range 40 to 100km/h)LH Transom Window24V Accessory Power Outlet / Cigar LighterOpening Rear Quarter GlassClimate ControlRadio / CD PlayerCup HolderFluorescent Cabin LampTrailer Package including Trailer “Stretch Brake”StorageCentre Storage ConsoleDash Storage Tray 2 DINDual Overhead Storage Coat Hooks Cab: ExternalFog LightsDoor Side Impact BeamsRoof Mounting Points (max. static load 70kg)Front End-Outline Marker LampsDual Air Horns ChassisIntegrated Front Underrun System (FUPS)Tool KitReverse Warning BuzzerClear Top of Chassis Rail for ease of Body Fitment

DIMENSIONS (mm)Wb = Wheel Base FP54Width Front Fender: 2490 Rear Axle: 2470 Front Track: 2055 Rear Track: 1850 Frame: 840 Length A Overall: 6115 C Front Overhang: 1370 D Wheelbase: 3800 G Front Axle to Rear of Cab: 700 H Rear of Cab to Trailer Valve 183 I Frame, Trailer Valve to Rear Axle 2917 J Frame, Rear Axle to End: 945 Height N Overall: 3278 O Air Intake to cab Roof 205 P Cab to Ground: 3073 Q Cab to Frame: 2113 R Rear Frame to Ground: - Inflated: 986 - Deflated: 936Turning Circle (kerb to kerb): 12.8m

Performance - (Calculated-paved road)Electronically Speed Limited to (km/h) 100Engine Speed at 100km/hr in top gear (rpm) 1726Gradeability** at Rated GCM: 29%** This is Theoretical Performance (it may vary under different conditions).

Note: Chassis reinforcement must be utilised for Tipper/Demountable type bodyconfigurations.

To conform with ADR 13/00 (lighting requirments) the following must be adheredto at body installation.

- If other than a flat type or tipper body is fitted, rear end out-line marker lampsmust be installed.

- If overall length exceeds 6.0 metres, side reflectors must be installed. - If overall length exceeds 7.5 metres, side marker lamps must be installed. To conform with ADR 42/04 (General Safety), rear wheel guards must be fitted tothe vehicle.